Search Results

Search found 28559 results on 1143 pages for 'upgrade issue'.

Page 920/1143 | < Previous Page | 916 917 918 919 920 921 922 923 924 925 926 927  | Next Page >

• How do I view source in Outlook 2010?

  - by Martin Duys

  This question has already been asked here; but the answer only gives advice on how to view the email header not the actual html source of the email. There is another question here, which I think may be caused by the same issue as mine, but does not have a satisfactory answer (the answer does not work for the person who posted the question) If I right click on the bottom of an email I can see the option to 'view source' but when I select it nothing happens. I have done a bit of research and came across a post for a much earlier version of Outlook that suggested adding something into the registry. I applied this advice, but it made no difference; but I'm pretty sure that applying this solution correctly for my circumstances will do the trick. When I first received this machine it had a demo version of UltraEdit installed. I uninstalled UltraEdit and installed Notepad++ instead. I am convinced that there is a registry entry that is pointing to UltraEdit as the default view for 'view source' in my email and I need to replace this entry with a reference to Notepad or Notepad++, but I don't know how to do this. Any suggestions?

  Read the article

• Are there any other causes of this error that are NOT related to initial setup?

  - by LordScree

  I'm trying to diagnose an issue at a customer site. They are receiving the following error: A network-related or instance-specific error occurred while establishing a connection to SQL Server I've seen this a few times, but only during the initial setup - it's often caused by one of the following: The database server is turned off The network connection between the database server and the application is closed or somehow blocked (e.g. a firewall) The SQL Server instance is not set up to receive remote connections from the application server (e.g. TCP is turned off, remote connections are disabled, or the "SQL Server Browser" service is stopped/disabled) However, if I assume that no configuration changes have been made, I'm trying to postulate on what the reason might be for getting this error at a random point after the initial setup. My initial thought is: SQL Server machine has run out of resources (e.g. RAM) and is unable to accept new requests from the application server Is this a valid theory? What other possible causes are there of this error that are not related to the initial setup of the server / application connection? Or is it simply impossible that this error could occur without a configuration change having been made (either on the SQL Server side, application side, or somewhere in-between (network))? NOTE: I believe this question differs from the plethora of questions related to this error message because the application and server have been talking to each other quite happily until now (most, if not all, other questions seem to relate to initial setup).

  Read the article

• Windows Server 2008 R2 creating a multi-year client certificate using the IIS certsrv page while deploying SSTP VPN

  - by Warren P

  I am trying to follow instructions on Technet about deploying a Standard (non-enterprise) SSTP based VPN) that were originally written for Server 2008, but I am using Server 2008 R2, I have gotten as far as the part where it asks you to create a request a Server Authentication certificate. I have deployed IIS, and Active Directory Certificate Services, and chose "Standalone" and "Standard" (non-enterprise) Certificate Authority because I don't have an OID and don't think I should have to get one for a simple deployment of SSTP. The resulting certificates made by the Certification Authority "Issue" command, only have a 1 year period of validity, I want a multi-year certificate. At no point in this process is there any way to input this information unless it's through the Attributes text input area on the Advance Certificate Request page, which appears to be generated using an old ActiveX control, which means I can only do this using the workarounds in the article that I linked at the top, and only using Internet Explorer. Update:: It may be that this question is pointless since self-signed keys do not appear to work, when I try them, using Windows 8 as the VPN client. The problem is that the keys that are self-created by the technique shown here do not have any Certificate Revocation Server URLs and so you get an error "The revocation function was unable to check revocation", and the VPN connection fails.

  Read the article

• SQL queries break our game! (Back-end server is at capacity)

  - by TimH

  We have a Facebook game that stores all persistent data in a MySQL database that is running on a large Amazon RDS instance. One of our tables is 2GB in size. If I run any queries on that table that take more than a couple of seconds, any SQL actions performed by our game will fail with the error: HTTP/1.1 503 Service Unavailable: Back-end server is at capacity This obviously brings down our game! I've monitored CPU usage on the RDS instance during these periods, and though it does spike, it doesn't go much over 50%. Previously we were on a smaller instance size and it did hit 100%, so I'd hoped just throwing more CPU capacity at the problem would solve it. I now think it's an issue with the number of open connections. However, I've only been working with SQL for 8 months or so, so I'm no expert on MySQL configuration. Is there perhaps some configuration setting I can change to prevent these queries from overloading the server, or should I just not be running them whilst our game is up? I'm using MySQL Workbench to run the queries. Here's an example.... SELECT * FROM BlueBoxEngineDB.Transfer WHERE Amount = 1000 AND FromUserId = 4 AND Status='Complete'; As you can see, it's not overly complex. There are only 5 columns in the table. Any help would be very much appreciated - Thanks!

  Read the article

• server_name seems to be ignored in nginx

  - by user46171

  I have two domains set up in nginx.conf. Both are using SSL with their own certificates, and proxy to Apache. However the second domain is completely ignored, and nginx always resolves to the first domain. I can't see what in the issue is with this configuration, having set the server_name in each case correctly (as far as I can see): http { include mime.types; default_type application/octet-stream; keepalive_timeout 65; upstream site { # real IP addresses masked server xx.xxx.x.xxx; server xx.xxx.x.xxx; } server { # this domain always works listen 443; server_name *.first-site.com; ssl on; ssl_certificate /var/ssl/first-site.crt; ssl_certificate_key /var/ssl/first-site.key; location / { access_log off; proxy_connect_timeout 15; proxy_next_upstream error; proxy_pass http://site; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Protocol https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } server { # this domain is ignored, always resolves to first-site.com listen 443; server_name *.second-site.com; ssl on; ssl_certificate /var/ssl/second-site.crt; ssl_certificate_key /var/ssl/second-site.key; location / { access_log off; proxy_connect_timeout 15; proxy_next_upstream error; proxy_pass http://site; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Protocol https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } }

  Read the article

• ffmpeg - creating DNxHD MFX files with alphas

  - by Hugh

  I'm struggling with something in FFMpeg at the moment... I'm trying to make DNxHD 1080p/24, 36Mb/s MXF files from a sequence of PNG files. My current command-line is: ffmpeg -y -f image2 -i /tmp/temp.%04d.png -s 1920x1080 -r 24 -vcodec dnxhd -f mxf -pix_fmt rgb32 -b 36Mb /tmp/temp.mxf To which ffmpeg gives me the output: Input #0, image2, from '/tmp/temp.%04d.png': Duration: 00:00:01.60, start: 0.000000, bitrate: N/A Stream #0.0: Video: png, rgb32, 1920x1080, 25 tbr, 25 tbn, 25 tbc Output #0, mxf, to '/tmp/temp.mxf': Stream #0.0: Video: dnxhd, yuv422p, 1920x1080, q=2-31, 36000 kb/s, 90k tbn, 24 tbc Stream mapping: Stream #0.0 -> #0.0 [mxf @ 0x1005800]unsupported video frame rate Could not write header for output file #0 (incorrect codec parameters ?) There are a few things in here that concern me: The output stream is insisting on being yuv422p, which doesn't support alpha. 24fps is an unsupported video frame rate? I've tried 23.976 too, and get the same thing. I then tried the same thing, but writing to a quicktime (still DNxHD, though) with: ffmpeg -y -f image2 -i /tmp/temp.%04d.png -s 1920x1080 -r 24 -vcodec dnxhd -f mov -pix_fmt rgb32 -b 36Mb /tmp/temp.mov This gives me the output: Input #0, image2, from '/tmp/1274263259.28098.%04d.png': Duration: 00:00:01.60, start: 0.000000, bitrate: N/A Stream #0.0: Video: png, rgb32, 1920x1080, 25 tbr, 25 tbn, 25 tbc Output #0, mov, to '/tmp/1274263259.28098.mov': Stream #0.0: Video: dnxhd, yuv422p, 1920x1080, q=2-31, 36000 kb/s, 90k tbn, 24 tbc Stream mapping: Stream #0.0 -> #0.0 Press [q] to stop encoding frame= 39 fps= 9 q=1.0 Lsize= 7177kB time=1.62 bitrate=36180.8kbits/s video:7176kB audio:0kB global headers:0kB muxing overhead 0.013636% Which obviously works, to a certain extent, but still has the issue of being yuv422p, and therefore losing the alpha. If I'm going to QuickTime, then I can get what I need using Shake, but my main aim here is to be able to generate .mxf files. Any thoughts? Thanks

  Read the article

• User unable to delete folder / files "File in use by another user" Server 2003

  - by Az

  I am administering a standalone Windows 2003 Terminal Server with no domain membership. Occasionally (about once a week or so) a user will attempt to delete a sub-folder in a Shared folder and gets denied with "File in use by another user". I tried checking the shared folder snap-in and that folder is not open. She has full control and is the owner of the folder as well. I even checked in "Effective permissions" for some of the folders / files she cant delete and she truly has full control. I am able to delete the folder as Administrator with no problem. Another odd thing, she can delete the files IN the folder most of the time (this issue happens on both folders and files in the share). Sometimes merely waiting a day or two will allow her to delete the folder or files. I am curious as to why she gets the message that it is in use as creator/owner with full control yet I don't get it simply as a member of the Admin group. If anyone out there has any ideas I'd love to hear them! THANK YOU.

  Read the article

• How can I extract data from Toshiba Satellite with a dead Windows installation?

  - by msanford

  I've got a Toshiba Satellite (unknown model number but bought early 2010) running Windows Vista which throws a kernel error on boot. We don't have the restore/recovery CD any more to restore the Windows partition. I have managed to boot to a Live CD version of Ubuntu 10.10 and have mounted the internal hard drive (which takes nearly 8 minutes). I suspect that the hard drive is malfunctioning, however, because copy tasks of even 30 megs of data to an attached and mounted USB flash drive takes over an hour, and some files are mysteriously inaccessible (not a permissions issue). When browsing folders, it takes many minutes to populate the folder window even with a single tiny file. During the copy tasks, the hard disk sounds like it tries to sleep several times in rapid succession, then continues accessing, it sounds, at full throughput. I initially tried using scp (from the shell) to copy data but I encountered the same local problems. I don't know the S.M.A.R.T. status of the hard disk, either. Is there a more effective way of going about recovering the data on the internal disk, assuming that I can't use a recovery CD and am too cheap to bring it in (for now, at least)?

  Read the article

• Arduino IDE "launch 4j" error

  - by John

  I have a computer running Windows XP. I am trying to run the Arduino IDE 0022. I double-click on arduino.exe, it waits about 30 seconds on the load up title screen, and then it gives me this error: Launch 4j: an error occurred while starting the application My only choice is to click "OK"; the error goes away, and the Arduino IDE closes. If I try to delete the Arduino files (to try overwriting with some different files), I get an error that doesn't allow me to do so: Cannot delete awt.dll: Access denied Make sure the disk is not full or write protected and that the file is not currently in use. The only way to delete the file is by restarting the computer. So something must still be trying to run after that first error. I have noticed in Task Manager that some Java programs are still running: javaw.exe (3 processes) I think this is a problem with Java, but I checked and updated all of my Java software and it is all up to date. I have looked on other forums for this issue and none of them seemed to help. From the forums I have tried: Different Arduino IDE versions Updating Java Opening arduino.exe as Administrator Nothing has worked. Anyone have any suggestions?

  Read the article

• apache access and error log written in same file

  - by user196075

  i have issue that access and error log are written in same file ! , the configuration in virtualhosts.conf as the following : <VirtualHost *:80> ServerName ************ ServerAdmin support@************8 DocumentRoot /var/www/html/*********.com ErrorLog /var/log/httpd/********/********.com_error_log CustomLog /var/log/httpd/********/********.com_access_log combined <Directory /var/www/html/***********.com> Options -Indexes FollowSymLinks AllowOverride All </Directory> </VirtualHost> as you see from the configuration each access and error logs should be save separately , but both logs are written in *.com_access_log , i have double check all permission , group and owner ... can't find anything wrong previous error in log file : [Thu Sep 19 14:15:02 2013] [error] [client 192.168.10.54] client denied by server configuration: /var/www/html/**********/show_has_offers.php i have tried to generate same error , i can find the hit in access log only as the following : 192.168.10.75 - - [24/Oct/2013:08:11:14 +0000] "GET /show_has_offers.php HTTP/1.1" 404 1586 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:22.0) Gecko/20100101 Firefox/22.0" 0 17332 and nothing in error log !! Please advice ...

  Read the article

• linux: per-process monitor, every 10 minutes, with history access

  - by Inbar Rose

  I really didn't know a better way to ask my question, hence you get a horribly named question. I will explain what i want to do, maybe that will help you help me. I would like to have my linux machine continuously monitor (every 10 minutes) all the processes on my machine. The information from each process that I require is the name, CPU usage, allocated (virtual) memory, and resident (ram) memory. If these periodic reports were to be looked at, they would look something like this: PROCESS CPU RAM VIRTUAL name1 % MB MB name2 % MB MB ...etc..etc These reports should be stored in such a way that I can access them at a later date by giving a date/time scope (range). For instance, if I want to see the history of my processes from 12:00:00 1.12.12 till 12:00:00 2.12.12 I can - and it should give me the history of the processes for every 10 minutes between those date/time borders. The format of the return is not important, that will be handled by a script anyway and can be modified into anything I need. I have looked into a few things so far, but have not found something that clearly meets my needs. Among the things i searched: sar, free(1), top(1).. and a few other things. It should be a simple issue, i can already see all this information by simply looking at my htop, but i need only a tool that will gather the desired fields for me for each processes every 10 minutes, and then also let me extract slices of that data based on date/time scopes (ranges). note: I have limited experience with linux, so please give detailed information. note2: The desired output will be something like this (after receiving the desired range) CPU USAGE BY PROCESS: proc_nameA 1,2,2,2,2,2...... numbers represent % usage every 10 minutes... proc_nameB 4,3,3,6,1,2...... The same idea with the other information.

  Read the article

• Samba access works with IP address only

  - by Sebastian Rittau

  I added a Debian etch host (hostname: webserver, IP address: 192.168.101.2) running Samba to a Windows network with a Windows 2003 PDC (IP address 192.168.101.3). The Samba server exports a public guest share, called "Intranet". The server shows up fine in the network, but trying to click on it produces an error dialog, stating I don't have the necessary permissions. So does entering \webserver manually and using \webserver\internet states that the path does not exist. Interestingly, accessing the share by IP address (\192.168.101.2 or \192.168.101.2\intranet) works fine. DNS is configured correctly, and "smbclient //webserver/intranet" on another Linux client works fine. One complicating issue is that the webserver is only a VMware virtual machine running on PDC server. Here is our smb.conf: [global] workgroup = Foobar server string = Webserver wins support = yes ; commenting out these wins server = 192.168.101.3 ; two lines has no effect dns proxy = no guest account = nobody [... snipped some unrelated bits, like logging ...] security = share [... snipped some password-related things ...] domain master = no [intranet] comment = Intranet path = /srv/webserver/contents browseable = yes guest ok = yes guest only = yes read only = yes create mask = 0775 directory mask = 0775

  Read the article

• Linksys SFE2000 Interface

  - by boburob

  I have a real problem with a layer 3 Linksys switch. First, every time it looses power, it seems to reset back to an older config. Not only this, but when this happens it looses interface settings on one subnet. This would not be a problem but I am completely unable to get to the interface on the working side. It allows me to log on and then just displays a blank screen. I have tried this on: IE6 IE7 IE8 IE9 Firefox 3.5 Opera Chrome All with the same results, except for Opera, which loads half the interface but nothing I can really use. I really need to get onto this switch so I can sort out routing and VLAN tagged ports, so if anyone has any ideas on either of these issues please let me know ASAP! Thanks! Also, due to its location and my lack of laptops with serial connections I cannot putty into it. UPDATE: Looked into this a bit more and it looks like this model of switch does not save the current config to boot unless you make sure to save it yourself, which explains the first issue, however the broken interface is more worrying!

  Read the article

• .lnk doesn't open, no errors

  - by MushinNoShin

  I have a shortcut (.LNK) on my desktop to a MS Access database out on a network drive. When I double click that shortcut I get an hour glass for about 10 seconds and then nothing. No errors, no access opening, nothing happens. It appears as if there's not even an MSAccess process running in the background. The file successfully opens from: The Open dialog in Access The commandline "C:\path\to\MSACCESS.EXE C:\path\to\shortcut.lnk" The commandline "C:\path\to\MSACCESS.EXE C:\path\to\whatTheShortcutPointsTo.mdb" The file silently fails to open from: Double clicking the shortcut.lnk Double clicking the mdb file that shortcut.lnk targets At first I thought it had to do with how the link handler operated but the fact that it does the same exact thing when I try to open the mdb directly in explorer makes me think it's an issue with explorer. I've tried restoring, deleting, and recreating the association with the extension. I've tried running MSACCESS.EXE /regserver. I've run out of things to throw at it. In case this is specific to MS Access 2007; I'm trying to use 2007 :)

  Read the article

• Is it possible to use ffmpeg to trim off X seconds from the beginning of a video with an unspecified length?

  - by marcelebrate

  I need to trim the just the first 1 or 2 seconds off of a series of FLV recordings of varying, unspecified lengths. I've found plenty of resources for extracting a specified duration from a video (e.g. 30 second clips), but none for continuing to the end of a video. Both of these attempts just yield a copied version of the video, sans desired trimming: ffmpeg -ss 2 -vcodec copy -acodec copy -i input.flv output.flv ffmpeg -ss 2 -t 120 -vcodec copy -acodec copy -i input.flv output.flv The thought on the second one was: perhaps if I specified a length beyond what was possible, it'd just go to the end. No dice. I know it's not an issue with codecs or using seconds instead of timecode since the following worked a charm: ffmpeg -ss 2 -t 5 -vcodec copy -acodec copy -i input.flv output.flv Any other ideas? I'm open to using other (Windows-based) command line tools, however am strongly favoring ffmpeg since I'm already using it for thumbnail creation and am familiar with it. If it helps, my videos will all be under 2 minutes.

  Read the article

• Datastage 8.7 installs fine on Window7 without any errors but it can not launch localhost:9080 web console

  - by user265273

  When I launch the web console, I get page can not be displayed error. What I have tried so far: I have re-installed DS about 7 times, and each time, I get same errors. I added entries in etc/hosts file for local host and my host name. I have turned off firewall. My hardware/software setup. My host system is window8.1. My vmware workstation is 7. The guest os is windows 7 enterprise x64. I have installed 10g, and given dba role to public. I have installed VS 5, and ms visual c++ 2010 express. I have installed msxml. IE version is 10. Firewall is off. My internet works fine It passed all the DS requirement tests and install completed successfully. When I launch my vmware guest instance, I do get SQL5000c error upon boot which I have tried to ignore in some installs and in some, I used db2systray -clean command to get rid of it. But that has not helped solve the webconsole connect failure to my host. I have spent over 2 weeks exclusively on this issue and badly need some help.

  Read the article

• Ping results "echo'd" out to a text file on Windows XP machine has unusual character rather than the outcome

  - by Richard Rice

  Here is the situation. I have a Windows XP machine that I would like to ping another machine and send the output to a text file for review at a later date. This is quite a standard question with several answers on this website and others. The issue I have is that when reviewing the txt file afterwards, the outcome of the ping appears as a strange character. A screenshot of the text file output can be found at the following link. Please note its the first 8 ping outputs that have a strange character. The %%B was me hoping that would output what I wanted! (Cannot upload image to any hosting websites because the company I work for seems to be afraid of them ....) Here is the code I'm using: @echo off For /f "tokens=1-2 delims=/:" %%b in ("%TIME%") do (set mytime=%%a%%b) PING 1.1.1.1 -n 1 -w 1000 >NUL for /f "tokens=*" %%A in ('ping 192.168.5.2 -w 10 -n 1') do (echo %date% %time% %%A >> C:\Temp\Ping_Checks\GarrickSide.txt && GOTO Ping ) :Ping PING 1.1.1.1 -n 1 -w 1000 >NUL for /f "tokens=* skip=2" %%A in ('ping 192.168.5.2 -w 10 -n 1') do (echo %date% %time% %%A >> C:\Temp\Ping_Checks\GarrickSide.txt && GOTO Ping ) This code works fine on a Windows 7 machine, but not on a Windows XP machine. It appears that the echo command isn't outputting the right data, but I don't understand this enough to correct it. Can anyone spot where I'm going wrong?

  Read the article

• How to copy a floppy boot disk?

  - by Sammy

  I have a floppy boot disk and I would like to copy it to preserve it, as a backup. If I have two floppy drives, A and B, how can I copy the disk? Assuming one has two floppy drives Can I simply insert the floppy disk in one of the drives and then an empty floppy disk in the other and issue a simple command like this one. A:\>copy . b: Will this only copy the contents of the current directory and none of the files in subdirectories? Do I have to explicitly specify the option to copy everything? Also, what about the boot information? That won't get copied, right? If one has only one floppy drive... How do you copy a floppy disk if you only have one floppy drive? Do you in fact have to copy its contents to the local hard drive C and then copy that to an empty floppy disk using the same floppy drive? A:\>copy . c:\floppydisk A:\> A:\>c: C:\> C:\>copy floppydisk a: C:\> I'm guessing I will need some type of disk image tool to really copy everything on a bootable floppy disk. Something like the dd command on Linux perhaps? Am I right?

  Read the article

• Hard drive causing BSOD

  - by JoshIrving

  I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

  Read the article

• Scripting around the lack of user:password@domain url functionality in jscript/IE

  - by Idiomatic

  I currently have a jscript that runs a php script on a server for me, dead simple. But... I want to be atleast somewhat secure so I setup a login. Now if I use the regular user:password@domain system it won't work (IE decided it was a security issue). And if I let IE just remember the password then it pops up a security message confirming my login every time (which kills the point of the button). So I need a way to make the security message go away. I could lower security settings, which tbh I am fine with but nothing seems to make it fuck off (there might be some registry setting to change). Find a fix for jscript that will let me use a password in the url. There used to be a regedit that worked for older systems which allowed IE to use url passwords (not working on my 64bit windows7 setup) though I doubt that'd have helped jscript anyways (since it outright crashes). Use an app other than IE. Inwhich case I'm not sure how to go about it, I want it to be responsive and invisible so IE was a good choice. It is near instant. Use XMLHttpRequest instead of IE directly? May even be faster but I've no idea if it'd help or just have the same error. Use a completely different approach. Maybe some app that can script website browsing. var args = {}; var objIEA = new ActiveXObject("InternetExplorer.Application"); if( WScript.Arguments.Item(0) == "pause" ){ objIEA.navigate("http://domain/index.html?pause"); } if( WScript.Arguments.Item(0) == "next" ){ objIEA.navigate("http://domain/index.html?next"); } objIEA.visible = false; while(objIEA.readyState != 4) {} objIEA.quit();

  Read the article

• Query specific nameserver for a particular domain upon VPN connect

  - by MT

  Some background: I have a work laptop with Ubuntu 9.10 on it. I have a small network at home where I've been running some basic services (for myself/my family) for 10 some years. In my home network there is a nameserver (Fedora) running Bind 9 with two "views". One view is the "outside" view and it provides name resolution (to the Internet at large) for email, a wiki, and a couple of blogs. The "inside" view provides name resolution (to the internal RFC1918 addresses of theses servers) as well as all the inside hosts, network equipment, ...etc. I connect with an openvpn client to my home network from outside (such as work). What I'd like to be able to do is resolve names on my internal network across this VPN (so I get the RFC1918 "inside" responses) without fully changing my resolver to the DNS server at my hose. For example, if I connect to the VPN from work, I can change my resolver (by editing resolv.conf) to the DNS server at my house (across the VPN) and then successfully resolve all of the inside DNS names on my home network. The issue I have with this is that now I'm no longer able to resolve "inside" names provided by my work's DNS servers (because I'm using my home DNS server). Alternatively, I can connect to the VPN and access my home severs via IP addresses directly, but this is inconvenient and causes issues with Apache name-based hosting (among other things). In the end, the effect I'm trying to achieve is as follows: When I connect to the VPN I automatically start sending DNS requests for *.myhomedomain.com to my home nameserver, but any other requests continue to go the the nameserver I was using before (the one I received on my company LAN via DHCP). When I disconnect the VPN, requests for *.myhomedomain.com go back to the local LAN DNS server (e.g. all requests are going there now). I'm looking for suggestion at to how this can be accomplished.

  Read the article

• Unusual HEAD requests to nonsense URLs from Chrome

  - by JeremyDWill

  I have noticed unusual traffic coming from my workstation the last couple of days. I am seeing HEAD requests sent to random character URLs, usually three or four within a second, and they appear to be coming from my Chrome browser. The requests repeat only three or four times a day, but I have not identified a particular pattern. The URL characters are different for each request. Here is an example of the request as recorded by Fiddler 2: HEAD http://xqwvykjfei/ HTTP/1.1 Host: xqwvykjfei Proxy-Connection: keep-alive Content-Length: 0 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/534.13 (KHTML, like Gecko) Chrome/9.0.597.98 Safari/534.13 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 The response to this request is as follows: HTTP/1.1 502 Fiddler - DNS Lookup Failed Content-Type: text/html Connection: close Timestamp: 08:15:45.283 Fiddler: DNS Lookup for xqwvykjfei failed. No such host is known I have been unable to find any information through Google searches related to this issue. I do not remember seeing this kind of traffic before late last week, but it may be that I just missed it before. The one modification I made to my system last week that was unusual was adding the Delicious add-in/extension to both IE and Chrome. I have since removed both of these, but am still seeing the traffic. I have run virus scan (Trend Micro) and HiJackThis looking for malicious code, but I have not found any. I would appreciate any help tracking down the source of the requests, so I can determine if they are benign, or indicative of a bigger problem. Thanks.

  Read the article

• How to stop my wireless adapter from received dhcp from router (windows)

  - by baobeiii

  Hi, I have a windows 7 computer which is connected via vpn to an OpenVpn server which happens to be in another country. I have all internet traffic being routed from my computer through the vpn to the server. However dns queries are not going through the vpn, but are instead going directly to my isp's dns via a route outside of the vpn tunnel. This is happening because my wireless adapter is configured to obtain DNS server address automatically. The router that stands between my computer and the internet happens to have a DCHP server running on it that is assinging my computer with the DNS addresses of the isp. The issue is, i haven't been able to stop my wireless adapter on my computer from receiving the dns settings from the router. I've tried selecting 'use the following dns server addresses' and then just leaving them blank, but ipconfig /all shows me that this hasn't worked and i'm still getting dns form the router. So is there any way to completely stop my windows wireless adapter from receiving these settings from the router? I have the OpenVpn server pushing to my computer's tun adapter the dns that it should be using. I'd rather solve this in a way that doesn't involve disabling the dhcp server on the router or fiddling with the router. The reason is i'm on a laptop and i want my vpn to not leak dns even when i'm out, for example in wireless hotspots. I know if i could just force the wireless adapter to ignore the router's dhcp server then my dns queries would go through the tunnel to the dns address pushed by the OpenVpn server. Sorry, i know thats long winded, if you have any idea's please do tell me. Thanks and merry xmas.

  Read the article

• Postfix not delivering from external senders and not logging anything

  - by simendsjo

  Some semi-recent upgrades must have broken my postfix+dovecot configuration, but I'm having problems finding out what the cause is. My domain is simendsjo.me with the MX record mail.simendsjo.me. I can send mail to both local and external recipients, and it delivers mail from internal mailboxes. The problem is that mail from external senders isn't delivered, and nothing is logged at all. The external sender also doesn't receive any errors. I have no idea where to ever start looking as nothing is logged at all when external mail is sent to my server. So the first issue would be: How can I turn on some debug messages for postfix? I've tried: debug_peer_level = 2 debug_peer_list = simendsjo.me .. And _level = 999 and _list = gmail.com where I'm trying to send emails from. but nothing is logged. When sending mails from a local mailbox (but from an outside computer, not localhost), a lot is logged. I don't have any rules in iptables either. Any ideas how I can get some debug messages for postfix?

  Read the article

• RAIDs with a lot of spindles - how to safely put to use the "wasted" space

  - by kubanczyk

  I have a fairly large number of RAID arrays (server controllers as well as midrange SAN storage) that all suffer from the same problem: barely enough spindles to keep the peak I/O performance, and tons of unused disk space. I guess it's a universal issue since vendors offer the smallest drives of 300 GB capacity but the random I/O performance hasn't really grown much since the time when the smallest drives were 36 GB. One example is a database that has 300 GB and needs random performance of 3200 IOPS, so it gets 16 disks (4800 GB minus 300 GB and we have 4.5 TB wasted space). Another common example are redo logs for a OLTP database that is sensitive in terms of response time. The redo logs get their own 300 GB mirror, but take 30 GB: 270 GB wasted. What I would like to see is a systematic approach for both Linux and Windows environment. How to set up the space so sysadmin team would be reminded about the risk of hindering the performance of the main db/app? Or, even better, to be protected from that risk? The typical situation that comes to my mind is "oh, I have this very large zip file, where do I uncompress it? Umm let's see the df -h and we figure something out in no time..." I don't put emphasis on strictness of the security (sysadmins are trusted to act in good faith), but on overall simplicity of the approach. For Linux, it would be great to have a filesystem customized to cap I/O rate to a very low level - is this possible?

  Read the article

< Previous Page | 916 917 918 919 920 921 922 923 924 925 926 927  | Next Page >