Search Results

Search found 25660 results on 1027 pages for 'booting issue'.

Page 928/1027 | < Previous Page | 924 925 926 927 928 929 930 931 932 933 934 935  | Next Page >

• Ubuntu 12.10 no network and no graphics

  - by khasiKoMasu

  I recently upgraded Ubuntu 12.04 to 12.10 only to find out that it won't connect to any network, neither wired nor wireless and the graphics is messed up too as in a low screen resolution. For 12.04, my system was running perfectly. I don't know why upgrade messed it up so bad. Reinstalling the OS is an issue because I have set up a lot of development environments that I cannot afford to set it up again. Some of the outputs: lspci -nn | grep 0200 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) nm-tool NetworkManager Tool State: disconnected cat /etc/network/interfaces auto lo iface lo inet loopback sudo cat /var/log/syslog | grep etwork | tail -n20 Nov 2 13:50:22 Cobalt NetworkManager[978]: SCPlugin-Ifupdown: (-1240454760) ... get_connections (managed=false): return empty list. Nov 2 13:50:22 Cobalt NetworkManager[978]: Ifupdown: get unmanaged devices count: 0 Nov 2 13:50:22 Cobalt bluetoothd[1016]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> modem-manager is now available Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> monitoring kernel firmware directory '/lib/firmware'. Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiFi enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WWAN enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiMAX enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> Networking is enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt kernel: [ 28.688167] type=1400 audit(1351882222.452:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1046 comm="apparmor_parser" Nov 2 13:50:22 Cobalt bluetoothd[1062]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1118]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1237]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) ps aux | grep -i network root 978 0.0 0.1 23732 4808 ? Ssl 13:50 0:00 NetworkManager sudo modprobe -r forcedeth FATAL: Module forcedeth not found

  Read the article

• how to code multiple button navigation with java activities [migrated]

  - by user1738212

  Question 1: I have 2 activities. I was wondering how to optimize it. I can either create 2 activities with multiple listeners. Or create multiple java files for each button(onclick listener) Question 2: I have tried to create multiple listeners in one java but can only get one button to work. What is the syntax for multiple listeners in one java file? Here is my *updated code: now the issue is no matter what button is clicked on it leads to the same page. package install.fineline; import android.app.Activity; import android.content.Context; import android.content.Intent; import android.os.Bundle; import android.widget.Button; import android.view.View; import android.view.View.OnClickListener; public class Activity1 extends Activity2 { Button Button1; Button Button2; Button Button3; Button Button4; Button Button5; Button Button6; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.fineline); addListenerOnButton(); } public void addListenerOnButton() { final Context context = this; Button1 = (Button) findViewById(R.id.autobody); Button1.setOnClickListener(new OnClickListener() { public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button2 = (Button) findViewById(R.id.glass); Button2.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button3 = (Button) findViewById(R.id.wheels); Button3.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button4 = (Button) findViewById(R.id.speedy); Button4.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button5 = (Button) findViewById(R.id.sevan); Button5.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button6 = (Button) findViewById(R.id.towing); Button6.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); }} activity2.java package install.fineline; import android.app.Activity; import android.os.Bundle; import android.widget.Button; public class Activity2 extends Activity { Button Button1; public void onCreate1(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.autobody); } Button Button2; public void onCreate2(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.glass); } Button Button3; public void onCreate3(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.wheels); } Button button4; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.speedy); } Button Button5; public void onCreate5(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.sevan); } Button Button6; public void onCreate6(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.towing); }}

  Read the article

• Is my class structure good enough?

  - by Rivten

  So I wanted to try out this challenge on reddit which is mostly about how you structure your data the best you can. I decided to challenge my C++ skills. Here's how I planned this. First, there's the Game class. It deals with time and is the only class main has access to. A game has a Forest. For now, this class does not have a lot of things, only a size and a Factory. Will be put in better use when it will come to SDL-stuff I guess A Factory is the thing that deals with the Game Objects (a.k.a. Trees, Lumberjack and Bears). It has a vector of all GameObjects and a queue of Events which will be managed at the end of one month. A GameObject is an abstract class which can be updated and which can notify the Event Listener The EventListener is a class which handles all the Events of a simulation. It can recieve events from a Game Object and notify the Factory if needed, the latter will manage correctly the event. So, the Tree, Lumberjack and Bear classes all inherits from GameObject. And Sapling and Elder Tree inherits from Tree. Finally, an Event is defined by an event_type enumeration (LUMBERJACK_MAWED, SAPPLING_EVOLUTION, ...) and an event_protagonists union (a GameObject or a pair of GameObject (who killed who ?)). I was quite happy at first with this because it seems quite logic and flexible. But I ended up questionning this structure. Here's why : I dislike the fact that a GameObject need to know about the Factory. Indeed, when a Bear moves somewhere, it needs to know if there's a Lumberjack ! Or it is the Factory which handles places and objects. It would be great if a GameObject could only interact with the EventListener... or maybe it's not that much of a big deal. Wouldn't it be better if I separate the Factory in three vectors ? One for each kind of GameObject. The idea would be to optimize research. If I'm looking do delete a dead lumberjack, I would only have to look in one shorter vector rather than a very long vector. Another problem arises when I want to know if there is any particular object in a given case because I have to look for all the gameObjects and see if they are at the given case. I would tend to think that the other idea would be to use a matrix but then the issue would be that I would have empty cases (and therefore unused space). I don't really know if Sapling and Elder Tree should inherit from Tree. Indeed, a Sapling is a Tree but what about its evolution ? Should I just delete the sapling and say to the factory to create a new Tree at the exact same place ? It doesn't seem natural to me to do so. How could I improve this ? Is the design of an Event quite good ? I've never used unions before in C++ but I didn't have any other ideas about what to use. Well, I hope I have been clear enough. Thank you for taking the time to help me !

  Read the article

• No access to Samba shares

  - by koanhead

  I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

  Read the article

• How to be Agile when new work keeps affecting completed work?

  - by jdln

  The project I'm working on is to re-skin an existing website. The functionally will stay the same, its just the styles that are changing. The HTML is not changing, I'm only modifying the CSS files. The site is pretty complex. There are dozens of pages. Users can be logged in and have a number of different roles. Depending on their role the content of the page and what pages they are allowed to see varys. We're using GIT and Github. I'm trying to write CSS that works as components. So when the same form elements, headings, etc appear on multiple pages they are already styled and are consistent. Most of time this is working well. Sadly the format and class names in the HTML are at times messy and unpredictable. When I fix something on one page it can break another. The job is also harder as no one knows exactly all the variations that are possible due to the user roles. As such I'm continuously finding new variations as I go along. I'm making headway by putting a lot of comments in my CSS. If I need to remove a CSS rule Ill comment it out so I can still see it with the chrome dev tools, and ill put a comment in the CSS saying why I removed it and for what page this was done. This means that if on another page I'm about to add add the rule to fix a different problem, there is more of a chance I will see how this would break the first page. This allows me to either find a different solution that will work for both pages, or I can make the override page specific. This has been working quite well for me. If I had complete free reign and the only deadline was to finish the project by the end then this method would be fine. However my manager is trying to mitigate risk by breaking the work into areas to be completed per sprint. This is counter to how I have been approaching things as something like my typography styles will affect all other pages on the site. The other issue is that the different stakeholders want to sign off each section as I go along. However once I've finished a section it may change if I change CSS that affects it and also affects a new section I'm working on. I've asked that the stakeholders have a quick unofficial sign off in stages (eg per sprint), and have the final official sign off at the end of the project, but this is being met with resistance. I do understand why it would be higher risk to do this, but the only way to guarantee that a signed off section will not change is to make ALL future changes page specific. In addition to this I'm being told that all work that I push to the Git repo should be ready to go live, and as such should not contain any code comments. This is risky for me as I wont know until I've finished the site if I will ever benefit from these comments or not. Has anyone else been in a similar situation and managed to find a compromise that worked for my development approach and also the desires of management and stakeholders to have a more Agile approach? A more Agile workflow works great when you can break the work into components and know that once something is done it wont be affected by future work. However the nature of this project makes this hard to achieve.

  Read the article

• ORA-4031 Troubleshooting Tool ???

  - by Takeyoshi Sasaki

  ORA-4031 ???????????????????? SGA ????????????(??????)??????????????????????????????????????????????????? ORA-4031 ??????????????????? ORA-4031 Troubleshooting Tool ??????????? ORA-4031 Troubleshooting Tool ?? ORA-4031 Troubleshooting Tool ? ORA-4031 ????????? ORA-4031 ???????????????????????????????????WEB????????????????????????????????My Oracle Support ??????????????????????? ORA-4031 ??????????????????????????????ORA-4031 ?????????????????????????????? ORA-4031 Troubleshooting Tool ???????? My Oracle Support ?????? Diagnostic Tools Catalog ??  ORA-4031 Troubleshooting Tool ???????????????? ORA-4031 Troubleshooting Tool ??????????????? ORA-4031 Troubleshooting Tool ????? ???2??????????????? ORA-4031 ?????????????????????????????ORA-4031 Troubleshooting Tool ????????????????????????????????????????ORA-4031 ???????????????????? ??????????????? ORA-4031???????????? ????????????? ORA-4031 ?????? AWR???????????????????????????????????????????????????????????? ????·???????·???????????? ORA-4031 ?????????? ????????? SR ?????????????????????????? [ADR] ????·??????·?????????? [10g ???] AWR?????(STATSPACK????)???? ?????????? ORA-4031 ????????????????????????????????????????????? ORA-4031 ?????????????? ORA-4031 ??????1?1??????????? ORA-4031 Troubleshooting Tool ???????????(??????????????)???????? ORA-4031 ????????? ???????????????????????????????????????????????? ??????????????????????????????????????1)High Session_Cached_Cursor Setting Causing Excessive Consumption of Shared Pool???SESSION_CACHED_CURSOR ??????????????????????????????????????????????2)Insufficient SGA Free Memory at StartupThis issue could occur if in the init.ora parameters of your Alert log, (shared_pool_size + large_pool_size + java_pool_size + db_keep_cache_size + streams_pool_size + db_cache_size) / sga_target is greater than 90%.????????????????????????? ?????????????? shared_pool_size, large_pool_size, java_pool_size, db_keep_cache_size, streams_pool_size, db_cache_size ????? /sga_target ??? 90% ??????????????????sga_target ??? memory_target ??????????????????????????????????????????????????????????????????? shared_pool_size ???????????????????????????????????????????????????????????????????????(?????????)? sga_target ????????????????????????????????????????????????????????????? ?????????????????????????????????????????????1)In your Alert log,* Look for parameters under "System parameters with non-default values:". If session_cached_cursor * 2000 / shared_pool_size is greater than 10%, then session_cached_cursors are consuming significant shared_pool_size.??? ????????????? "System parameters with non-default values:" ????  session_cached_cursor * 2000 ??? shared_pool_size ? 10% ???????????????????????? ???2) In your Alert log, SGA Utilization (Sum of shared_pool_size, large_pool_size, java_pool_size, db_keep_cache_size, streams_pool_size and db_cache_size over sga_target) is 99%, which might be too high. ??? shared_pool_size, large_pool_size, java_pool_size, db_keep_cache_size, streams_pool_size and db_cache_size ???? sga_target ? 99% ???????????????????? ?????????????????????????????? My Oracle Support ??????????????????????????1)Decrease the parameter SESSION_CACHED_CURSORSSESSION_CACHED_CURSORS ???????????????????????2)Reduce the minimum values for the dynamic SGA components to allow memory manager to make changes as neededSGA ?????????????????(???)?????????????????? 2????????????????????? ORA-4031 Trobuleshooting Tool ????????????????????????????????????????? ORA-4031 Troubleshooting Tool ?????? ORA-4031 ??????????????????????ORA-4031 Troubleshooting Tool ???????????????????????????????????????????????????????ORA-4031 ????????????????????????????ORA-4031 ??????????????? ORA-4031 Troubleshooting Tool ?????????

  Read the article

• WMI Rights required to read root\MicrosoftIISv2 in IIS7 with IIS6 compatibility mode

  - by JoeBilly

  I need to manage my IIS7 (Windows Server 2008) remotely with a WMI IIS6 API. So I added the IIS6 WMI Compatibility and IIS6 Metabase Compatibility roles to access the root\MicrosoftIIsv2 namespace. I have a domain account which is not administrator on the remote machine ; with this right, everything is ok. I configured these rights for my domain account to access the root\MicrosoftIIsv2 WMI namespace remotely ; note that these rights work perfectly on a IIS6 and Windows Server 2003 : DCOM : Account in Distributed COM Users Remote & local access to DCOM WMI : Root\CIMV2 (I need access here too) Execute methods, Enable Account, Remote Enable Root\Default (I need access here too) Execute methods, Enable Account, Remote Enable Root\MicrosoftIISv2 Execute methods, Enable Account, Provider Write, Remote Enable IIS Metabase (Metabase Explorer) : LM Full Control (W3SVC inherits these permissions) I tried to give some access on C:\Windows\System32\inetsrv too ; don't know if needed. My issue is : I can't list the IIS WebSites (\root\MicrosoftIISv2:IIsWebServerSetting.Name="W3SVC/*"). I don't get an 'access denied' but nothing is returned. My API and powershell tests can connect and execute queries in the root\MicrosoftIISv2 namespace I can read the IIsComputer class ex: Get-WmiObject IIsComputer -namespace "ROOT\MicrosoftIISv2" -authentication PacketPrivacy | SELECT * I can't read the IIsWebServerSetting, IIsWebServer ... to list the WebSites : the query returns an empty collection ex: Get-WmiObject IIsWebServerSetting -namespace "ROOT\MicrosoftIISv2" -authentication PacketPrivacy | SELECT ServerComment All queries work perfectly if the account is administrator as already said I am using PacketPrivacy authentication FI: I got a Warning Event 5605 with the Administrator right or not, that does not seem to have an impact : The root\MicrosoftIISv2 namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level. Change the authentication level to Pkt_Privacy and run the script or application again Ok, I have some more informations, when I use IIS 6 Metabase Explorer with my administrator account I can see the rights are correctly inherited for my non-administrator account. But when I try to connect using my non-administrator account, I can list the LM node, but get an "access denied, failed to get a key's data" when I try to browse the child nodes. I'll check further. I tried to Trace the WMI Activity, and everything seems OK ; this tends to confirm that the problem lies in IIS Rights.

  Read the article

• Group Policy error 1006 with and error code 52

  - by Bernesto

  I have a hyper-v cluster operating on win2k8 R2 in a 2003 forest. These servers are at our NOC with a DC that connects to our PDC at HQ via a persistent VPN. The cluster boxes are reporting a error event ID 1006 shown below. The DC is also reporting an error 5805 also shown below. I have found numorus posts regarding 1006 errors, but none for error ID 52's. It's weird, I can ping and I can browse network shares on the DC from each. I thought maybe a DNS or net work issue, but nslook up works too. Event 1006 <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" /> <EventID>1006</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>1</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2013-12-17T00:08:19.582292600Z" /> <EventRecordID>41808</EventRecordID> <Correlation ActivityID="{26B10592-6228-4A3E-845B-E04B49702A54}" /> <Execution ProcessID="964" ThreadID="1384" /> <Channel>System</Channel> <Computer>NEOREEFVH1.neoreef.com</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="SupportInfo1">1</Data> <Data Name="SupportInfo2">5012</Data> <Data Name="ProcessingMode">0</Data> <Data Name="ProcessingTimeInMilliseconds">1138</Data> <Data Name="ErrorCode">52</Data> <Data Name="ErrorDescription">Unavailable</Data> <Data Name="DCName" /> </EventData> </Event> Event 5805 Event Type: Error Event Source: NETLOGON Event Category: None Event ID: 5805 Date: 12/16/2013 Time: 2:32:01 PM User: N/A Computer: NEOREEFSRV15 Description: The session setup from the computer NEOREEFVH3 failed to authenticate. The following error occurred: Access is denied. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 22 00 00 c0 "..À Here are the networks on the hosts: Any with a "Enabled" Are virtual switches.

  Read the article

• Mounting NAS share: Bad Address

  - by Korben

  I've faced to the problem that can't solve. Hope you can help me with it. I have a storage QNAP TS-459U, with it's own Linux, and 'massive1' folder shared, which I need to mount to my Debian server. They are connected by regular patch cord. Debian server has two network interfaces - eth0 and eth1. eth0 is for Internet, eth1 is for QNAP. So, I'm saying this: mount -t cifs //169.254.100.100/massive1/ /mnt/storage -o user=admin , where 169.254.100.100 is an IP of QNAP's interface. The result I get (after entering password): mount error(14): Bad address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Tried: mount.cifs, smbmount, with '/' at the end of the network share and without it, and many other variations of that command. And always its: mount error(14): Bad address Funny thing is when I was in Data Center, I had connected my netbook to QNAP by the same scheme (with Fedora 16 on it), and it connected without any problems, I could read/write files on the QNAP's NAS share! So I'm really stuck with the Debian. I can't undrestand where's the difference with Fedora, making this error. Yeah, I've used Google. Couldn't find any useful info. Ping to the QNAP's IP is working, I can log into QNAP's Linux by ssh, telnet on 139's port is working. This is network interface configuration I use in Debian: IP: 169.254.100.1 Netmask: 255.255.0.0 The only diffence in connecting to Fedora and Debian is that in Fedora I've added gateway - 169.254.100.129, but ping to this IP is not working, so I think it's not necessary at all. P.S. ~# cat /etc/debian_version wheezy/sid ~# uname -a Linux host 2.6.32-5-openvz-amd64 #1 SMP Mon Mar 7 22:25:57 UTC 2011 x86_64 GNU/Linux ~# smbtree WORKGROUP \\HOST host server \\HOST\IPC$ IPC Service (host server) \\HOST\print$ Printer Drivers NAS \\MASSIVE1 NAS Server \\MASSIVE1\IPC$ IPC Service (NAS Server) \\MASSIVE1\massive1 \\MASSIVE1\Network Recycle Bin 1 [RAID5 Disk Volume: Drive 1 2 3 4] \\MASSIVE1\Public System default share \\MASSIVE1\Usb System default share \\MASSIVE1\Web System default share \\MASSIVE1\Recordings System default share \\MASSIVE1\Download System default share \\MASSIVE1\Multimedia System default share Please, help me with solving this strange issue. Thanks before.

  Read the article

• Query total page count via SNMP HP Laserjet

  - by Tim

  I was asked to get hold of the total pages counts for the 100+ printers we have at work. All of them are HP Laser or Business Jets of some description and the vast majority are connected via some form of HP JetDirect network card/switch. After many hours of typing in IP addresses and copying and pasting the relevant figure in to Excel I have now been asked to do this on a weekly basis. This led me to think there must be an easier way, as an IT professional I can surely work out some time saving method to solve this issue. Suffice it to say I do not feel very professional now after a day or so of trying to make SNMP work for me! From what I understand the first thing is to enable SNMP on the printer. Done. Next I would need something to query the SNMP bit. I decided to go open source and free and someone here recommended net-snmp as a decent tool (I would like to have just added the printers as nodes in SolarWinds but we are somewhat tight on licences apparently). Next I need the name of the MIB. For this I believe the HP-LASERJET-COMMON-MIB has the correct information in it. Downloaded this and added to net-snmp. Now I need the OID which I believe after much scouring is printed-media-simplex-count (we have no duplex printers, that we are interested in at least). Running the following command yields the following demoralising output: snmpget -v 2c -c public 10.168.5.1 HP-LASERJET-COMMON-MIB:.1.3.6.1.2.1.1.16.1.1.1 (the OID was derived from running: snmptranslate -IR -On printed-media-simplex-count Unlinked OID in HP-LASERJET-COMMON-MIB: hp ::= { enterprises 11 } Undefined identifier: enterprises near line 3 of C:/usr/share/snmp/mibs/HP-LASER JET-COMMON-MIB..txt .1.3.6.1.2.1.1.16.1.1.1 ) Unlinked OID in HP-LASERJET-COMMON-MIB: hp ::= { enterprises 11 } Undefined identifier: enterprises near line 3 of C:/usr/share/snmp/mibs/HP-LASER JET-COMMON-MIB..txt HP-LASERJET-COMMON-MIB:.1.3.6.1.2.1.1.16.1.1.1: Am I barking up the wrong tree completely with this? My aim was to script it all to output to a file for all the IP addresses of the printers and then plonk that in Excel for my lords and masters to digest at their leisure. I have a feeling I am using either the wrong MIB or the wrong OID from said MIB (or both). Does anyone have any pointers on this for me? Or should I give up and go back to navigationg each printers web page individually (hoping not).

  Read the article

• Programmatically add an ISAPI extension dll in IIS 7 using ADSI?

  - by fretje

  I apologize beforehand, this is a cross post of this SO question. I thought I'd ask it there first, but apparently it doesn't harvest any answers there. I hope it will get more attention here. When I have an answer somewhere, I'll delete the other one. I'm trying to programmatically add an ISAPI extension dll in IIS using ADSI. This has been working for ages on previous versions of IIS, but it seems to fail on IIS 7. I am using similar code like shown in this question: var web = GetObject("IIS://localhost/W3SVC/1/ROOT/specificVirtualDirectory"); var maps = web.ScriptMaps.toArray(); map[maps.length] = ".aaa,c:\\path\\to\\isapi\\extension.dll,1,GET,POST"; web.ScriptMaps = maps.asDictionary(); web.SetInfo(); After executing that code, I do see an "AboMapperCustom-12345678" entry for that specific dll in the "Handler mappings" of the specific virtual directory in which I added the script map. But when I try to use that extension in a browser, I always get HTTP Error 404.2 Not Found The page you are requesting cannot be served because of the ISAPI and CGI Restriction list settings on the Web server. Even after adding an entry to allow that specific dll in the "ISAPI and CGI restrictions", I keep getting that error. To make it actually work, I first have to undo these steps (encountering the same issue like the OP of the question mentioned above: after deleting the script map entry from the IIS manager GUI, I also have to programmatically delete it using ADSI before it's actually gone from the metabase). And then manually add an entry like this: inetmgr - webserver - website - virtual directory - handler mappings - add script map... path = *.dll, executable = <path to dll>, name = <doesn't matter, but it's mandatory> click "yes" on the question "do you want to allow this ISAPI extension?" When I compare the 2 entries, they are exactly the same, except for the "Entry Type" which seems to be "Inherited" for the programmatically added one and "Local" for the one added manually. The strange thing is, even though it says "Inherited", I don't see it anywhere in IIS on a higher level. Where is it inheriting from? In my code, I do add the script map to the specific virtual directory so it should be "Local" as well. Maybe there is the problem, but I don't know how to add a "Local" Script Map using ADSI. I really would like to keep using the ADSI method, as otherwise I will have to use different methods in our setup when working with IIS 7 or previous versions, and I would like to avoid that. To recap: How can I programmatically add a script map entry and its companion CGI and ISAPI restrictions entry to IIS 7 using ADSI? Anybody who can shed some light on this? Any help appreciated.

  Read the article

• Watchguard Firewall - Issues with SSLVPN

  - by David W

  I have a client who has a WatchGuard XTM 23 device on site as their primary firewall. I just upgraded its firmware a couple days ago to the latest version for that series, 11.6.6. The problem is that I haven't successfully been able to setup a VPN connection for them. Using the instructions at http://www.watchguard.com/help/docs/webui/11_XTM/en-US/index.html#en-US/mvpn/ssl/configure_fb_for_mvpn_ssl_c.html, I'm trying to setup a VPN with SSL connection: From the firewall web GUI / Dashboard, I go to VPN - Mobile VPN with SSL, I enable it, add the organization's public IP address to which the firewall is connected. I've setup a group in Active Directory named "SSLVPN-Users", verified that the WatchGuard box can talk to the Active Directory Server, and added myself to that group. I then downloaded the WatchGuard Mobile VPN with SSL client onto my own Windows 7 machine, walked to the client's 2nd building across the street (which has a different public internet connection), and tried to connect to the VPN. When I do try to connect with the client, I get the following errors: 2013-06-24T15:41:32.119 Launching WatchGuard Mobile VPN with SSL client. Version 11.6.0 (Build 343814) Built:Jun 13 2012 01:42:55 2013-06-24T15:41:37.595 Requesting client configuration from 184.174.143.176:443 2013-06-24T15:41:50.106 FAILED:Cannot perform http request, timeout 12002 2013-06-24T15:41:50.106 failed to get domain name I discovered today the Firebox System Manager, and its "Traffic Monitor" which gives current log information (refreshes every 5 seconds). Unfortunately, it doesn't look like the client has setup any sort of WatchGuard / Firebox logging server, so actually recording server-side logs to file hasn't been done. I can work on implementing that if I need to. I noticed that if I try to ping the client's public IP address from an outside source, I don't get a response back (unless I added a policy into the firewall to allow ICMP traffic from "External", which I successfully did a few seconds ago for testing purposes - that rule has since been reverted to not respond to external ping requests). There's a policy in the firewall for allowing SSLVPN Traffic authentication requests coming from any external source TO the Firebox, and then to do the authentication / actually allow the VPN traffic, there's a policy allowing traffic for anyone in the SSLVPN-Users group to flow between that user and the inside network. So my questions are: Has anyone seen these errors before from the Watchguard VPN Client, and/or do you have any suggestions on how I can resolve that error? If I need to setup logging server to grab the firewall logs (in order to further troubleshoot this issue), how complicated a task is that and does it require a lot of system resources? The organization I'm consulting with only has 1 server and not a lot of resources or technical know-how.

  Read the article

• Oracle Application Server Performance Monitoring and Tuning (CPU load high)

  - by Berkay

  Oracle Application Server Performance Monitoring and Tuning (CPU load high) i have just hired by a company and my boss give me a performance issue to solve as soon as possible. I don't have any experience with the Java EE before at the server side. Let me begin what i learned about the system and still couldn't find the solution: We have an Oracle Application Server (10.1.) and Oracle Database server (9.2.), the software guys wrote a kind of big J2EE project (X project) using specifically JSF 1.2 with Ajax which is only used in this project. They actively use PL/SQL in their code. So, we started the application server (Solaris machine), everything seems OK. users start using the app starting Monday from different locations (app 200 have user accounts,i just checked and see that the connection pool is set right, the session are active only 15 minutes). After sometime (2 days) CPU utilization gets high,%60, at night it is still same nothing changed (the online user amount is nearly 1 or 2 at this time), even it starts using the CPU allocated for other applications on the same server because they freed If we don't restart the server, the utilization becomes %90 following 2 days, application is so slow that end users starts calling. The main problem is software engineers say that code is clear, and the System and DBA managers say that we have the correct configuration,the other applications seems OK why this problem happens only for X application. I start copying the DB to a test platform and upgrade it to the latest version, also did in same with the application server (Weblogic) if there is a bug or not. i only tested by myself only one user and weblogic admin panel i can track the threads and dump them. i noticed that there are some threads showing as a hogging. when i checked the manuals and control the trace i see that it directs me the line number where PL/SQL code is called from a .java file. The software eng. says that yes we have really complex PL/SQL codes but what's the relation with Application server? this is the problem of DB server, i guess they're right... I know the question has many holes, i'd like to give more in detail but i appreciate the way you guide me. Thanks in advance ... Edit: The server both in CPU and Memory enough to run more complex applications

  Read the article

• CentOS 5.5 : Postfix, Dovecot & MySQL

  - by GruffTech

  I'm hoping someone has seen this issue before because I'm at quite a loss. We're building a new outbound smtp server for our clients that features anti-spam scanning and virus scanning for outbound emails, something we had not previously done. So with CentOS 5.5 x64, Installed and patched completely. Postfix & Dovecot both installed via base repo. [grufftech@outgoing postfix]# rpm -qa | grep postfix postfix-2.3.3-2.1.el5_2 [grufftech@outgoing postfix]# rpm -qa | grep dovecot dovecot-1.0.7-7.el5 [grufftech@outgoing ~]# dovecot --build-options Build options: ioloop=poll notify=inotify ipv6 openssl SQL drivers: mysql postgresql Passdb: checkpassword ldap pam passwd passwd-file shadow sql Userdb: checkpassword ldap passwd prefetch passwd-file sql static /etc/dovecot.conf auth default { mechanisms = plain login digest-md5 cram-md5 passdb sql { args = /etc/dovecot-mysql.conf } userdb sql { args = /etc/dovecot-mysql.conf } userdb prefetch { } user = nobody socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = postfix group = postfix } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } All the server is doing is auth for postfix, so no reason to have imap / pop / dict. /etc/dovecot-mysql.conf driver = mysql connect = host=10.0.32.159 dbname=mail user=****** password=******** default_pass_scheme = plain user_query = select 1 password_query = select password from users where username = '%n' and domain = '%d' So drop in my configuration, (which is working on another server identical to this one.) [grufftech@outgoing ~]# /etc/init.d/dovecot start Starting Dovecot Imap: [ OK ] Sweet. Booted up nicely, thats good.... (incoming problem in 3....2....1....) May 21 08:09:01 outgoing dovecot: Dovecot v1.0.7 starting up May 21 08:09:02 outgoing dovecot: auth-worker(default): mysql: Connect failed to 10.0.32.159 (mail): Can't connect to MySQL server on '10.0.32.159' (13) - waiting for 1 seconds before retry well what the crap. went and checked permissions on my MySQL database, and its fine. [grufftech@outgoing ~]# mysql vpopmail -h 10.0.32.159 -u ****** -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 127828558 Server version: 4.1.22 Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql>\q So! My server can talk to my database server. but dovecot, for whatever reason, isn't able to. I've fiddled with it for the last six hours, grabbed slightly-older copies of the RPM (ones that matched our production server exactly) to test those, copied configs, searched google, searched server fault, chatted in IRC, banged my head against the table, I've done it all. Surely I'm doing something wrong or forgetting something, can anyone tell me what the elephant in the room is? This stuff is supposed to work.

  Read the article

• Linux Mint 10 LXDE computer to act as LTSP Server without luck

  - by Rautamiekka

  So I've tried to make our screen-broken HP laptop to also serve as LTSP Server in addition to various other tasks, without luck, which may be cuz I'm running LM10 LXDE while the instructions are for Ubuntu. Excuse my ignorance. The entire output from Terminal after installing LTSP stuff along with a Server kernel and a load of other packages: administrator@rauta-mint-turion ~ $ sudo lt ltrace ltsp-build-client ltsp-chroot ltspfs ltspfsmounter ltsp-info ltsp-localapps ltsp-update-image ltsp-update-kernels ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-update-kernels find: `/opt/ltsp/': No such file or directory administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo ltsp-update-image Cannot determine assigned port. Assigning to port 2000. mkdir: cannot create directory `/opt/ltsp/i386/etc/ltsp': No such file or directory /usr/sbin/ltsp-update-image: 274: cannot create /opt/ltsp/i386/etc/ltsp/update-kernels.conf: Directory nonexistent /usr/sbin/ltsp-update-image: 274: cannot create /opt/ltsp/i386/etc/ltsp/update-kernels.conf: Directory nonexistent Regenerating kernel... chroot: failed to run command `/usr/share/ltsp/update-kernels': No such file or directory Done. Configuring inetd... Done. Updating pxelinux default configuration...Done. Skipping invalid chroot: /opt/ltsp/i386 chroot: failed to run command `test': No such file or directory administrator@rauta-mint-turion ~ $ sudo ltsp-chroot chroot: failed to run command `/bin/bash': No such file or directory administrator@rauta-mint-turion ~ $ bash administrator@rauta-mint-turion ~ $ exit exit administrator@rauta-mint-turion ~ $ sudo ls /opt/ltsp i386 administrator@rauta-mint-turion ~ $ sudo ls /opt/ltsp/i386/ administrator@rauta-mint-turion ~ $ sudo ltsp-build-client NOTE: Root directory /opt/ltsp/i386 already exists, this will lead to problems, please remove it before trying again. Exiting. error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo rm -rv /opt/ltsp/i386 removed directory: `/opt/ltsp/i386' administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ aptitude search ltsp p fts-ltsp-ldap - LDAP LTSP module for the TFTP/Fuse supplicant p ltsp-client - LTSP client environment p ltsp-client-core - LTSP client environment (core) p ltsp-cluster-accountmanager - Account creation and management daemon for LTSP p ltsp-cluster-control - Web based thin-client configuration management p ltsp-cluster-lbagent - LTSP loadbalancer agent offers variables about the state of the ltsp server p ltsp-cluster-lbserver - LTSP loadbalancer server returns the optimal ltsp server to terminal p ltsp-cluster-nxloadbalancer - Minimal NX loadbalancer for ltsp-cluster p ltsp-cluster-pxeconfig - LTSP-Cluster symlink generator p ltsp-controlaula - Classroom management tool with ltsp clients p ltsp-docs - LTSP Documentation p ltsp-livecd - starts an LTSP live server on an Ubuntu livecd session p ltsp-manager - Ubuntu LTSP server management GUI i A ltsp-server - Basic LTSP server environment i ltsp-server-standalone - Complete LTSP server environment i A ltspfs - Fuse based remote filesystem for LTSP thin clients p ltspfsd - Fuse based remote filesystem hooks for LTSP thin clients p ltspfsd-core - Fuse based remote filesystem daemon for LTSP thin clients p python-ltsp - provides ltsp related functions administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp-server ltsp-server-standalone ltspfs The following packages will be REMOVED: debconf-utils{u} debootstrap{u} dhcp3-server{u} gstreamer0.10-pulseaudio{u} ldm-server{u} libpulse-browse0{u} ltsp-server{p} ltsp-server-standalone{p} ltspfs{p} nbd-server{u} openbsd-inetd{u} pulseaudio{u} pulseaudio-esound-compat{u} pulseaudio-module-x11{u} pulseaudio-utils{u} squashfs-tools{u} tftpd-hpa{u} 0 packages upgraded, 0 newly installed, 17 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 6,996kB will be freed. Do you want to continue? [Y/n/?] (Reading database ... 158454 files and directories currently installed.) Removing ltsp-server-standalone ... Purging configuration files for ltsp-server-standalone ... Removing ltsp-server ... Purging configuration files for ltsp-server ... dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot/ltsp' not empty so not removed. dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot' not empty so not removed. Processing triggers for man-db ... (Reading database ... 158195 files and directories currently installed.) Removing debconf-utils ... Removing debootstrap ... Removing dhcp3-server ... * Stopping DHCP server dhcpd3 [ OK ] Removing gstreamer0.10-pulseaudio ... Removing ldm-server ... Removing pulseaudio-module-x11 ... Removing pulseaudio-esound-compat ... Removing pulseaudio ... * PulseAudio configured for per-user sessions Removing pulseaudio-utils ... Removing libpulse-browse0 ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 157944 files and directories currently installed.) Removing ltspfs ... Processing triggers for man-db ... (Reading database ... 157932 files and directories currently installed.) Removing nbd-server ... Stopping Network Block Device server: nbd-server. Removing openbsd-inetd ... * Stopping internet superserver inetd [ OK ] Removing squashfs-tools ... Removing tftpd-hpa ... tftpd-hpa stop/waiting Processing triggers for ureadahead ... Processing triggers for man-db ... administrator@rauta-mint-turion ~ $ sudo aptitude purge ~c The following packages will be REMOVED: dhcp3-server{p} libpulse-browse0{p} nbd-server{p} openbsd-inetd{p} pulseaudio{p} tftpd-hpa{p} 0 packages upgraded, 0 newly installed, 6 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Do you want to continue? [Y/n/?] (Reading database ... 157881 files and directories currently installed.) Removing dhcp3-server ... Purging configuration files for dhcp3-server ... Removing libpulse-browse0 ... Purging configuration files for libpulse-browse0 ... Removing nbd-server ... Purging configuration files for nbd-server ... Removing openbsd-inetd ... Purging configuration files for openbsd-inetd ... Removing pulseaudio ... Purging configuration files for pulseaudio ... Removing tftpd-hpa ... Purging configuration files for tftpd-hpa ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo aptitude install ltsp-server-standalone The following NEW packages will be installed: debconf-utils{a} debootstrap{a} ldm-server{a} ltsp-server{a} ltsp-server-standalone ltspfs{a} nbd-server{a} openbsd-inetd{a} squashfs-tools{a} The following packages are RECOMMENDED but will NOT be installed: dhcp3-server pulseaudio-esound-compat tftpd-hpa 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/498kB of archives. After unpacking 2,437kB will be used. Do you want to continue? [Y/n/?] Preconfiguring packages ... Selecting previously deselected package openbsd-inetd. (Reading database ... 157868 files and directories currently installed.) Unpacking openbsd-inetd (from .../openbsd-inetd_0.20080125-4ubuntu2_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... Setting up openbsd-inetd (0.20080125-4ubuntu2) ... * Stopping internet superserver inetd [ OK ] * Starting internet superserver inetd [ OK ] Selecting previously deselected package ldm-server. (Reading database ... 157877 files and directories currently installed.) Unpacking ldm-server (from .../ldm-server_2%3a2.1.3-0ubuntu1_all.deb) ... Selecting previously deselected package debconf-utils. Unpacking debconf-utils (from .../debconf-utils_1.5.32ubuntu3_all.deb) ... Selecting previously deselected package debootstrap. Unpacking debootstrap (from .../debootstrap_1.0.23ubuntu1_all.deb) ... Selecting previously deselected package nbd-server. Unpacking nbd-server (from .../nbd-server_1%3a2.9.14-2ubuntu1_i386.deb) ... Selecting previously deselected package squashfs-tools. Unpacking squashfs-tools (from .../squashfs-tools_1%3a4.0-8_i386.deb) ... Selecting previously deselected package ltsp-server. GNU nano 2.2.4 File: /etc/ltsp/ltsp-update-image.conf # Configuration file for ltsp-update-image # By default, do not compress the image # as it's reported to make it unstable NO_COMP="-noF -noD -noI -no-exports" [ Switched to /etc/ltsp/ltsp-update-image.conf ] administrator@rauta-mint-turion ~ $ ls /opt/ firefox/ ltsp/ mint-flashplugin/ administrator@rauta-mint-turion ~ $ ls /opt/ltsp/i386/ administrator@rauta-mint-turion ~ $ ls /opt/ltsp/ i386 administrator@rauta-mint-turion ~ $ sudo ltsp ltsp-build-client ltsp-chroot ltspfs ltspfsmounter ltsp-info ltsp-localapps ltsp-update-image ltsp-update-kernels ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-build-client NOTE: Root directory /opt/ltsp/i386 already exists, this will lead to problems, please remove it before trying again. Exiting. error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ ^C administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp ltspfs ltsp-server ltsp-server-standalone administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp-server The following packages will be REMOVED: ltsp-server{p} 0 packages upgraded, 0 newly installed, 1 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 1,073kB will be freed. The following packages have unmet dependencies: ltsp-server-standalone: Depends: ltsp-server but it is not going to be installed. The following actions will resolve these dependencies: Remove the following packages: 1) ltsp-server-standalone Accept this solution? [Y/n/q/?] The following packages will be REMOVED: debconf-utils{u} debootstrap{u} ldm-server{u} ltsp-server{p} ltsp-server-standalone{a} ltspfs{u} nbd-server{u} openbsd-inetd{u} squashfs-tools{u} 0 packages upgraded, 0 newly installed, 9 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 2,437kB will be freed. Do you want to continue? [Y/n/?] (Reading database ... 158244 files and directories currently installed.) Removing ltsp-server-standalone ... (Reading database ... 158240 files and directories currently installed.) Removing ltsp-server ... Purging configuration files for ltsp-server ... dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot/ltsp' not empty so not removed. dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot' not empty so not removed. Processing triggers for man-db ... (Reading database ... 157987 files and directories currently installed.) Removing debconf-utils ... Removing debootstrap ... Removing ldm-server ... Removing ltspfs ... Removing nbd-server ... Stopping Network Block Device server: nbd-server. Removing openbsd-inetd ... * Stopping internet superserver inetd [ OK ] Removing squashfs-tools ... Processing triggers for man-db ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo aptitude purge ~c The following packages will be REMOVED: ltsp-server-standalone{p} nbd-server{p} openbsd-inetd{p} 0 packages upgraded, 0 newly installed, 3 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Do you want to continue? [Y/n/?] (Reading database ... 157871 files and directories currently installed.) Removing ltsp-server-standalone ... Purging configuration files for ltsp-server-standalone ... Removing nbd-server ... Purging configuration files for nbd-server ... Removing openbsd-inetd ... Purging configuration files for openbsd-inetd ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo rm -rv /var/lib/t teamspeak-server/ tftpboot/ transmission-daemon/ administrator@rauta-mint-turion ~ $ sudo rm -rv /var/lib/tftpboot removed `/var/lib/tftpboot/ltsp/i386/pxelinux.cfg/default' removed directory: `/var/lib/tftpboot/ltsp/i386/pxelinux.cfg' removed directory: `/var/lib/tftpboot/ltsp/i386' removed directory: `/var/lib/tftpboot/ltsp' removed directory: `/var/lib/tftpboot' administrator@rauta-mint-turion ~ $ sudo find / -name "ltsp" /opt/ltsp administrator@rauta-mint-turion ~ $ sudo rm -rv /opt/ltsp removed directory: `/opt/ltsp/i386' removed directory: `/opt/ltsp' administrator@rauta-mint-turion ~ $ sudo aptitude install ltsp-server-standalone The following NEW packages will be installed: debconf-utils{a} debootstrap{a} ldm-server{a} ltsp-server{a} ltsp-server-standalone ltspfs{a} nbd-server{a} openbsd-inetd{a} squashfs-tools{a} The following packages are RECOMMENDED but will NOT be installed: dhcp3-server pulseaudio-esound-compat tftpd-hpa 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/498kB of archives. After unpacking 2,437kB will be used. Do you want to continue? [Y/n/?] Preconfiguring packages ... Selecting previously deselected package openbsd-inetd. (Reading database ... 157868 files and directories currently installed.) Unpacking openbsd-inetd (from .../openbsd-inetd_0.20080125-4ubuntu2_i386.deb) ... Processing triggers for man-db ... GNU nano 2.2.4 New Buffer GNU nano 2.2.4 File: /etc/ltsp/dhcpd.conf # # Default LTSP dhcpd.conf config file. # authoritative; subnet 192.168.2.0 netmask 255.255.255.0 { range 192.168.2.70 192.168.2.79; option domain-name "jarvinen"; option domain-name-servers 192.168.2.254; option broadcast-address 192.168.2.255; option routers 192.168.2.254; # next-server 192.168.0.1; # get-lease-hostnames true; option subnet-mask 255.255.255.0; option root-path "/opt/ltsp/i386"; if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" { filename "/ltsp/i386/pxelinux.0"; } else { filename "/ltsp/i386/nbi.img"; } } [ Wrote 22 lines ] administrator@rauta-mint-turion ~ $ sudo service dhcp3-server start * Starting DHCP server dhcpd3 [ OK ] administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo cat /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging case "$MODE" in after-install) echo LTSP_CHROOT=$ROOT >> $ROOT/etc/ltsp_chroot ;; esac administrator@rauta-mint-turion ~ $ cd $ROOT/etc/ltsp_chroot bash: cd: /etc/ltsp_chroot: No such file or directory administrator@rauta-mint-turion ~ $ cd $ROOT/etc/ administrator@rauta-mint-turion /etc $ ls acpi chatscripts emacs group insserv.conf.d logrotate.conf mysql php5 rc6.d smbnetfs.conf UPower adduser.conf ConsoleKit environment group- iproute2 logrotate.d nanorc phpmyadmin rc.local snmp usb_modeswitch.conf alternatives console-setup esound grub.d issue lsb-base nbd-server pm rcS.d sound usb_modeswitch.d anacrontab cron.d firefox gshadow issue.net lsb-base-logging.sh ndiswrapper pnm2ppa.conf request-key.conf ssh ushare.conf apache2 cron.daily firefox-3.5 gshadow- java lsb-release netscsid.conf polkit-1 resolvconf ssl vga apm cron.hourly firestarter gtk-2.0 java-6-sun ltrace.conf network popularity-contest.conf resolv.conf sudoers vim apparmor cron.monthly fonts gtkmathview kbd ltsp NetworkManager ppp rmt sudoers.d vlc apparmor.d crontab foomatic gufw kernel lxdm networks printcap rpc su-to-rootrc vsftpd.conf apport cron.weekly fstab hal kernel-img.conf magic nsswitch.conf profile rsyslog.conf sweeprc w3m apt crypttab ftpusers hdparm.conf kerneloops.conf magic.mime ntp.conf profile.d rsyslog.d sysctl.conf wgetrc at.deny cups fuse.conf host.conf kompozer mailcap obex-data-server protocols samba sysctl.d wildmidi auto-apt dbconfig-common gai.conf hostname ldap mailcap.order ODBCDataSources psiconv sane.d teamspeak-server wodim.conf avahi dbus-1 gamin hosts ld.so.cache manpath.config odbc.ini pulse screenrc terminfo wpa_supplicant bash.bashrc debconf.conf gconf hosts.allow ld.so.conf menu openal purple securetty thunderbird X11 bash_completion debian_version gdb hosts.deny ld.so.conf.d menu-methods openoffice python security timezone xdg bash_completion.d default gdm hp legal mime.types opt python2.6 sensors3.conf transmission-daemon xml bindresvport.blacklist defoma ghostscript ifplugd lftp.conf mke2fs.conf pam.conf python2.7 sensors.d ts.conf xulrunner-1.9.2 blkid.conf deluser.conf gimp inetd.conf libpaper.d modprobe.d pam.d python3.1 services ucf.conf zsh_command_not_found blkid.tab depmod.d gnome init libreoffice modules pango rc0.d sgml udev bluetooth dhcp gnome-system-tools init.d linuxmint motd papersize rc1.d shadow ufw bonobo-activation dhcp3 gnome-vfs-2.0 initramfs-tools locale.alias mplayer passwd rc2.d shadow- updatedb.conf ca-certificates dictionaries-common gnome-vfs-mime-magic inputrc localtime mtab passwd- rc3.d shells update-manager ca-certificates.conf doc-base gre.d insserv logcheck mtab.fuselock pcmcia rc4.d skel update-motd.d calendar dpkg groff insserv.conf login.defs mtools.conf perl rc5.d smb2www update-notifier administrator@rauta-mint-turion /etc $ cd ltsp/ administrator@rauta-mint-turion /etc/ltsp $ ls dhcpd.conf ltsp-update-image.conf administrator@rauta-mint-turion /etc/ltsp $ cat dhcpd.conf # # Default LTSP dhcpd.conf config file. # authoritative; subnet 192.168.2.0 netmask 255.255.255.0 { range 192.168.2.70 192.168.2.79; option domain-name "jarvinen"; option domain-name-servers 192.168.2.254; option broadcast-address 192.168.2.255; option routers 192.168.2.254; # next-server 192.168.0.1; # get-lease-hostnames true; option subnet-mask 255.255.255.0; option root-path "/opt/ltsp/i386"; if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" { filename "/ltsp/i386/pxelinux.0"; } else { filename "/ltsp/i386/nbi.img"; } } administrator@rauta-mint-turion /etc/ltsp $

  Read the article

• Uwsgi starts from root but not as a service

  - by vittore

  I have nginx + uwsgi setup for flask website. thats my nginx server { listen 80; server_name _; location /static/ { alias /var/www/site/app/static/; } location / { uwsgi_pass 127.0.0.1:5080; include uwsgi_params; } } And here is my uwsgi config.xml <uwsgi> <socket>127.0.0.1:5080</socket> <autoload/> <daemonize>/var/log/uwsgi_webapp.log</daemonize> <pythonpath>/var/www/site/</pythonpath> <module>run:app</module> <plugins>python27</plugins> <virtualenv>/var/www/venv/</virtualenv> <processes>1</processes> <enable-threads/> <master /> <harakiri>60</harakiri> <max-requests>2000</max-requests> <limit-as>512</limit-as> <reload-on-as>256</reload-on-as> <reload-on-rss>192</reload-on-rss> <no-orphans/> <vacuum/> </uwsgi> When I trying to start uwsgi service (service uwsgi start) it says ok but there is no uwsgi process and I see the following in the log: *** Starting uWSGI 1.0.3-debian (64bit) on [Fri Oct 25 00:43:13 2013] *** compiled with version: 4.6.3 on 17 July 2012 02:26:54 current working directory: / writing pidfile to /run/uwsgi/app/gsk/pid detected binary path: /usr/bin/uwsgi-core setgid() to 33 setuid() to 33 limiting address space of processes... your process address space limit is 536870912 bytes (512 MB) your memory page size is 4096 bytes *** WARNING: you have enabled harakiri without post buffering. Slow upload could be rejected on post-unbuffered webservers *** uwsgi socket 0 bound to TCP address 127.0.0.1:5080 fd 6 bind(): Permission denied [socket.c line 107] However when I start uwsgi as a root uwsgi --socket 127.0.0.1:5080 --module run --callab app --harakiri 15 --harakiri-verbose --logto2 tmp/uwsgi.log It starts just fine and after restarting nginx I can access website. What can be an issue ?

  Read the article

• PXE-E32 TFTP Open Timeout While Attempting to PXE Boot from Windows Deployment Services

  - by bschafer

  I'm running Windows Deployment Services on Windows Server 2008 R2 on top of an ESX 4.0 box. This is the only function of this VM instance, although it had previously functioned as an AD Domain Controller. My DHCP server is running on our primary Domain Controller, which is also Server 2008 R2, but running on metal. Everything was working perfectly until we recently had our backup generator fail during a power outage, causing all of our servers and networking equipment to lose power for a period of time. When we brought all of our equipment back up, everything was working as expected except for WDS. Our network is split up into several different vlans. Now, depending on which vlan the client computer is on, it's behaving differently when attempting to PXE boot into WDS. Our servers are located on the 10.55.x.x vlan, which, due to the nature of it, has no DHCP server active in it. The first computer we plugged in happened to be in the 10.99.x.x vlan, which is supposed to be reserved for network management devices (i.e. switches), but we've been using it occasionally otherwise. That computer gave us PXE-E11 ARP Timeout errors. When we moved to a different computer on the 10.19.x.x vlan (for general purpose use), it finally gets an IP from DHCP, but it presents us with a very stumping PXE-E32 TFTP Open Timeout error. Before the power outage, it didn't matter which vlan a device was on; it would PXE boot and image just fine. I've made no changes to anything server-side. Everything is configured exactly the same way it was on my WDS and DHCP servers as before the power outage. I've tried several different computers, including different models. All of this, combined with the quirky behavior depending on the vlan, makes me think something went wrong in one or more of our switches, probably because of the power outage. Unfortunately, I'm no network guy, and I know very little about how to configure our switches properly. Is this an issue with switches, etc? If so, how can I fix it? Is there some magical option I'm not aware of? Does anybody out there have any hunches? I've pretty much exhausted my ideas. Our main switch is an HP Procurve 5406. We also have 3x HP Procurve 4208 switches. The ESX Server is an HP ProLiant DL380 G6. The WDS VM is currently using the VMXNET3 network adaptor, but we've also tried the E1000 adaptor.

  Read the article

• Fatal error 9001 on shared SQL Server 2008

  - by user643192

  I've asked this same question on StackOverflow, but I might actually have a better chance for an answer here so am posting here as well. I know this question has been asked here before, but none of the suggestions have worked for me. I have an ASP.NET MVC (v. 3) website on a shared server. The website was working fine for a few weeks now, until I started getting a Fatal Error 9001 error straight after login. Because this is a shared server, there are only very limited things I can do with the database (and I don't know that much about databases anyway). The help desk insist that there is nothing wrong with their server. I got various suggestions from them: Upgrading to the business plan because I am out of space (first suggestion) Even though the .mdb file is small, the .ldb can grow very quickly. The .ldb file is probably taking up all the space. I have 100MB available, the database size is 16.5MB. Can the .ldb file take up the remaining space? On querying this with the helpdesk, they admitted that my entire db is only 25MB. There is something wrong with my SQL queries and I should check the website. I'm using EF with linq to SQL. Everything was working fine until now... Can there be something that goes wrong in the queries that causes this sort of error? There is nothing wrong to be seen in the db logs, so this error cannot possibly have happened. I should log it next time it happens and contact again. I found some posts suggesting that restoring a DB backup can get rid of the issue. I do not have a recent backup, and can't take a new one because of a fatal error 9001 occurring. Since this is a shared server I have about 0 authority to execute anything against the DB (think CHECKDB, truncating the log, etc.). So I am at my wits end pretty much. What else can I do/try to get my website moving again?

  Read the article

• PostgreSQL service doesn't start on Windows 7

  - by Mehrdad

  (Not sure if this should be on Stack Overflow or Super User... please move if needed.) When I start the PostgreSQL service on Windows 7 x64, it immediately stops. When I check my log folder (C:\PostgreSQL\9.1\data\pg_log\), I see new but empty log files. The Event Viewer doesn't tell me anything other than the fact that the server did not respond. I've even tried turning off my firewall (I don't have any antivirus or anything else), but nothing helps. The setup works fine when I'm on Windows XP (32-bit) (same computer, different partition). I can't figure out what's wrong, even though I've tried tracing the system calls. Is PostgreSQL compatible with Windows 7 x64 at all? Any ideas what the issue might be? More info: This problem also happens at the end of installation -- the service starts, then stops immediately, before the installer can do anything. Installation log: Starting the database server... Executing cscript //NoLogo "C:\Program Files\PostgreSQL\9.1\installer\server\startserver.vbs" postgresql-x64-9.1 Script exit code: 0 Script output: Starting postgresql-x64-9.1 Service postgresql-x64-9.1 started successfully // <==== NOT REALLY!! It stops! startserver.vbs ran to completion Script stderr: Loading additional SQL modules... Executing cscript //NoLogo "C:\Program Files\PostgreSQL\9.1\installer\server\loadmodules.vbs" "postgres" "****" "C:\Program Files\PostgreSQL\9.1" "C:\Program Files\PostgreSQL\9.1\data" 5432 Script exit code: 2 Script output: Installing the adminpack module in the postgres database... Executing 'C:\Users\HOMEUS~1\AppData\Local\Temp\rad6C20D.bat'... psql: could not connect to server: Connection refused (0x0000274D/10061) Is the server running on host "localhost" (::1) and accepting TCP/IP connections on port 5432? could not connect to server: Connection refused (0x0000274D/10061) Is the server running on host "localhost" (127.0.0.1) and accepting TCP/IP connections on port 5432? Failed to install the 'adminpack' module in the 'postgres' database loadmodules.vbs ran to completion Script stderr: Program ended with an error exit code Error running cscript //NoLogo "C:\Program Files\PostgreSQL\9.1\installer\server\loadmodules.vbs" "postgres" "****" "C:\Program Files\PostgreSQL\9.1" "C:\Program Files\PostgreSQL\9.1\data" 5432 : Program ended with an error exit code

  Read the article

• Looking for definitive answer to accessing a network drive/NAS/SMB drive via Windows 7 HOME and Windows 7 Professional. Is it possible and how?

  - by Rob

  I want to be able to access my Lacie 2Big network drive in Windows 7 Explorer. I have a machine with Windows 7 Home and one with Windows 7 Professional. Neither Windows 7, home or pro, can access the drive. The Windows 7 Home machine displays the drive in its Explorer, with the capacity, but on clicking the icon, I get another window, blank with the busy pointer which does not eventually stop. The drive is working perfectly. How do I know this? Because I can access it with no problems on my Apple Mac, Windows XP home and Ubuntu machines on the same network as the Windows 7 machines. Except for the Windows XP home machine that required Lacie ethernet agent program, the Mac and the Ubuntu machines needed no setup, the drive appeared like any other drive. So my 2 questions: Is it possible to access a network share drive, e.g. a NAS like Lacie 2big in Windows 7 Home Premium and Windows 7 Professional. If so how? I read on Microsoft's own forums and elsewhere that network sharing drives, e.g. via SambaSMB is NOT possible on Windows 7 Home. Is this true? http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/e08c3500-a722-4b44-b644-64f94f63c8e5/ This question is a more comprehensive re-write of my earlier question: Windows 7 / TCP/IP network share guide - looking for to resolve failure to mount lacie network drive but works on XP,Linux,Mac. ...where I haven't received a solving answer, and I have tried to find a solution myself. Lacie themselves haven't offered a definitive solving answer either, but I suspect it's not just their drives but SMB/network share/NAS in general... This is utterly pathetic that Windows 7 home cannot access something as simple as a network drive, especially given that Windows XP home can. My research so far: Apparently it is possible on Windows 7 Professional, via the Local Security Policy, only on Windows 7 Professional, not Windows 7 Home: http://www.sevenforums.com/tutorials/7357-local-security-policy-editor-open.html http://answers.microsoft.com/en-us/windows/forum/windows_7-security/accessing-local-security-policy-in-windows-7-home/0c8300d0-1d23-4de0-9b37-935c01a7d17a http://social.technet.microsoft.com/Forums/en-US/w7itprosecurity/thread/14fc5037-3386-4973-b5d8-2167272ff5ad/ http://www.tomshardware.com/forum/75-63-windows-samba-issue Another solution offered is editing the registry, doesn't look promising to me, fiddly and not guaranteed, hard to produce a complete solution I think, given that everyone's registry can vary. Registry key edit solutons: https://www.lacie.com/uk/mystuff/ticket/ticket.htm?tid=101278940 http://networksecurity.farzadbanifatemi.com/security-policy/how-to-access-local-security-policy-windows-7-home-premium Related: Does Windows 7 Home Premium support backing up to a network share Network Copy to Windows 7 File Share Fails and Kills Network Connection

  Read the article

• Windows XP SP3 - Library not registered error... IE8 not installing.

  - by Wesley

  Specs to put things in context: AMD Athlon XP 2400+ @ 1987 MHz / 2 x 512MB PC3200 DDR RAM / WD 160GB IDE HDD / 3DFuzion 128MB GeForce 6200 AGP 4x / FIC AM37 / Windows XP SP3 Just recently, I was unable to start Windows Media Player. I clicked it and the busy cursor came up, but then nothing happened. Also, I tried doing a search for a file, and same thing. It would show busy cursor then suddenly stop doing anything. I couldn't find it in the Processes of the Task Manager. (Perhaps I don't know what I'm looking for?) Also, I was trying to update my DirectX, which has been running something older than DX9 9.0c for a while now, except the installation fails due to "internal error". I think the failed DirectX installation has been like that for a while... (I remember trying to install DX9 9.0c a while back, but still failed.) The Windows programs not starting, I don't think I've ever had before... what could be the cause of these problems?! Thanks in advance. =) EDIT1: Weird thing now is that when I try to open User Accounts, I get a message saying "Wrong number of arguments or invalid property assignment." Also, when I'm trying to open services.msc, I'm getting a script error that says that "Library not registered." (Code: 0, URL: res://C:\WINDOWS\System32\mmcndmgr.dll/views.htm) Perhaps this is related to my other question, where I seemed to have an unregistered library of some sort. EDIT2: The DirectX End-User Runtime Web Installer freakishly worked and updated successfully. Now, I have focussed the question on the bigger problem. For WMP11, H&S, and Search, I click it once, get a busy icon for a second, and then nothing happens. Refer to EDIT1 for other problems. EDIT3: Seems that my problems may be related to some Internet Explorer Script Errors. So what I did was download the IE8 installer from the Microsoft website, but when I run it and get to the main portion of the installer, it just keeps looping on the Downloading step of the installation. The installer is still running, but I left it for at least 4 hours and the downloading step was still not finished. What is the problem? Also, I uninstalled Ubuntu 9.10 after these problems, but they still remain. EDIT4: I'm getting an active desktop recovery background on startup now. And within seconds my computer hangs again. EDIT3 explains main issue though.

  Read the article

• netsh wlan add profile not importing encrypted passphrase

  - by sirlancelot

  I exported a wireless network connection profile from a Windows 7 machine correctly connected to a WiFi network with a WPA-TKIP passphrase. The exported xml file shows the correct settings and a keyMaterial node which I can only guess is the encrypted passphrase. When I take the xml to another Windows 7 computer and import it using netsh wlan add profile filename="WiFi.xml", it correctly adds the profile's SSID and encryption type, but a balloon pops up saying that I need to enter the passphrase. Is there a way to import the passphrase along with all other settings or am I missing something about adding profiles? Here is the exported xml with personal information removed: <?xml version="1.0"?> <WLANProfile xmlns="http://www.microsoft.com/networking/WLAN/profile/v1"> <name>[removed]</name> <SSIDConfig> <SSID> <hex>[removed]</hex> <name>[removed]</name> </SSID> <nonBroadcast>false</nonBroadcast> </SSIDConfig> <connectionType>ESS</connectionType> <connectionMode>auto</connectionMode> <autoSwitch>false</autoSwitch> <MSM> <security> <authEncryption> <authentication>WPAPSK</authentication> <encryption>TKIP</encryption> <useOneX>false</useOneX> </authEncryption> <sharedKey> <keyType>passPhrase</keyType> <protected>true</protected> <keyMaterial>[removed]</keyMaterial> </sharedKey> </security> </MSM> </WLANProfile> Any help or advice is appreciated. Thanks. Update: It seems if I export the settings using key=clear, the passphrase is stored in the file unprotected and I can import the file on another computer without issue. I've updated my question to reflect my findings.

  Read the article

• using own mail server with external domain and dns. Now have internal dns. dkim test not working

  - by mojotaker

  I am not very knowledgeable in this area, but have been able to make great head way. Now i am stuck I setup my own mail server, e.g mailbox.example.com. I had the domain dns point to my mail server in my office. i was able to set up everything working fine. such as dkim and spf records. Recently i decided to setup an internal dns server in the office so as to resolve some addresses for some development servers internally. Ok the problem now is my mail server is sitting on the internal dns server (the mail server is on the same box as the dns server) its still able to send and receive emails but not sure if dkim is working properly. when i try to do a dkim test "amavisd test keys" i get "invalid (public key: not available)" and i know that that means i have a dns issue. so what should i do? I am currently looking at my internal dns zonefile and i dont know what to do (i am using bind dns server on an ubuntu-server box). do i configure a dkim txt record on the local dns ? or is there a way to forward dkim "request" to the external dns ? or do i have this whole thing done wrong ? To be clear Basically my internal domain name is the same as my external domain name (i.e example.com) i have a mail server within my internal domain mailbox.example.com, that uses my external domain dns (external dns has been setup to point to my emailserver (which of course is now sitting behind my internal dns)) dkim (i dont think its working because it fails the dkim test") Need help in determing the proper setup What is the proper way to set this up ? thank you Update: Here is my local dns zone file ; ; BIND data file for local loopback interface ; $TTL 604800 @ IN SOA webserver.example.com. root.example.com. ( //dns and webserver on the same box 2012030809 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS webserver.example.com. @ IN A 192.168.1.117 @ IN AAAA ::1 ns IN A 192.168.1.117 www IN A xx.xx.xx.xxx // ip of external domain box (bluehost) work around to let local clients access website newsletter IN A xx.xx.xxx.117 // external ip address of local network mailbox.example.com. IN A 192.168.1.111 // internal ip of mailbox (mailserver webserver.example.com. IN A 192.168.1.117 //internal ip of a webserver

  Read the article

• Installing Zend on CentOS is having dependency issues

  - by rax

  I'm trying to install PHP's Zend Server on my CentOS VPS but it's having dependency issues that I can't seem to resolve. zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-gui-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-dev-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) knowledgetree-ce-3.7.0-2.noarch from KTnoarch has depsolving problems --> Missing Dependency: php-5.2-xmlrpc-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) knowledgetree-ce-3.7.0-2.noarch from KTnoarch has depsolving problems --> Missing Dependency: php-5.2-fileinfo-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-zend-extensions is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-common-extensions-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-fileinfo-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) Error: Missing Dependency: php-5.2-xmlrpc-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) Error: Missing Dependency: php-5.2-gui-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-common-extensions-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-dev-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-zend-extensions is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) When consulting the Google, all I get told is how to install PHP 5.2.* on CentOS. According to the output of php -v, I've done that. PHP 5.2.8 (cli) (built: Sep 28 2009 15:37:15) Copyright (c) 1997-2008 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies with the ionCube PHP Loader v3.1.34, Copyright (c) 2002-2009, by ionCube Ltd. How can I solve this issue?

  Read the article

• PHP Error / Mk-livestatus in Nagvis

  - by tod

  I have Nagios and Nagvis installed via Debian packages, but when I run Nagvis and try to get into the "General Configuration" menu I get this error Error: (0) Array to string conversion (/usr/share/nagvis/share/server/core/classes/WuiViewEditMainCfg.php:126) #0 /usr/share/nagvis/share/server/core/classes/WuiViewEditMainCfg.php(126): nagvisExceptionErrorHandler(8, 'Array to string...', '/usr/share/nagv...', 126, Array) #1 /usr/share/nagvis/share/server/core/classes/WuiViewEditMainCfg.php(44): WuiViewEditMainCfg->getFields() #2 /usr/share/nagvis/share/server/core/classes/CoreModMainCfg.php(56): WuiViewEditMainCfg->parse() #3 /usr/share/nagvis/share/server/core/functions/index.php(120): CoreModMainCfg->handleAction() #4 /usr/share/nagvis/share/server/core/ajax_handler.php(63): require('/usr/share/nagv...') #5 {main} I'm also having an issue with backends in Nagvis. check-mk-livestatus is installed, but I get this error when hovering over items: Problem (backend: live_1): Unable to connect to the /var/lib/nagios3/rw/live in backend live_1: Connection refused Or when trying to add things: Unable to fetch data from backend - falling back to input field. /var/lib/nagios3/rw/ exists, but there is no "live" file. I'm really not sure what is going on, especially since these were all Debian packages... Here is the most relevant part of the nagvis.ini.php: ; ---------------------------- ; Backend definitions ; ---------------------------- ; Example definition of a livestatus backend. ; In this case the backend_id is live_1 ; The path /usr/local/nagios/var/rw has to exist [backend_live_1] backendtype="mklivestatus" ; The status host can be used to prevent annoying timeouts when a backend is not ; reachable. This is only useful in multi backend setups. ; ; It works as follows: The assumption is that there is a "local" backend which ; monitors the host of the "remote" backend. When the remote backend host is ; reported as UP the backend is queried as normal. ; When the remote backend host is reported as "DOWN" or "UNREACHABLE" NagVis won't ; try to connect to the backend anymore until the backend host gets available again. ; ; The statushost needs to be given in the following format: ; "<backend_id>:<hostname>" -> e.g. "live_2:nagios" ;statushost="" socket="unix:/var/lib/nagios3/rw/live" There is nothing relating to 'backends' or 'mklivestatus' in /var/log/nagios3/nagios.log Any help would be much appreciated

  Read the article

< Previous Page | 924 925 926 927 928 929 930 931 932 933 934 935  | Next Page >