Search Results

Search found 25893 results on 1036 pages for 'boot order'.

Page 93/1036 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

  • Multiple Problems Installing 12.04, now can't use Windows

    - by user87997
    First I tried using the 32-bit wubi.exe installer from the main Ubuntu website. It worked fine, dual booted with Windows 7 and all. I tried installing several applications and got errors. After searching for a little while for a fix, I found that someone else had solved the problem by uninstalling the 32-bit version and installing 64-bit Ubuntu. Apparently there is no wubi.exe installer for the 64-bit version, so I used LinuxLive to put the iso file onto a USB drive. I changed my the boot order in BIOS to check the USB first. It did, and I got into the Ubuntu installer just fine. Everything was working fine, but then I got an error that GRUB could not be installed. I chose "install manually later" or something like that. Immediately, the installer said it was done and ready for a reboot. At this point, my USB is still in the computer. The computer reboots...and it's back at the installer for the USB. I look up what's going on here, and someone says in a thread they solved it by selecting "Try Ubuntu" then installing it via a shortcut on the desktop. I assumed that Ubuntu simply hadn't installed and it would be safe to try again, so I did. It finished installing, this time I chose a different partition that wasn't being used. The thread also said to reinstall grub to the mounted drive, so I did that. Next I took out my USB and rebooted. I get stuck on the GRUB GNU loader, v.1.99 or something I believe it says at the top. I can't do anything, and it doesn't detect Windows 7 OR Ubuntu. When I check partitions, I have two 43 GB partitions that both have the same files in them (I'm assuming those are the two Ubuntu installations), and can only run Ubuntu off of my USB-- and can't run Windows 7 at all, however from within Ubuntu the windows 7 filesystem and files can still be seen. I have no idea what to do now. I used Ubuntu in the past (9.xx) and never had these sorts of problems! Please help. And sorry for the wall of text.

    Read the article

  • Full brightness and keyboard backligh at boot

    - by joelalmeidaptg
    I own an Asus N56VZ, and each time I start Ubuntu (13.10 and prior versions) my screen brightness and keyboard backlights reset their values to the max. Ubuntu doesn't save my settings on reboot. I was wondering if someone could help me with this? It is horrible when, at night, I turn on my computer - it is like looking directly to the sun, and it hurts my eyes. I tried googling and none of the pages I found actually helped. I think my issue might be grub-related. I have a dual-boot with Windows 8.1, so before I start my computer I see grub to choose my operating system. My screen starts at full brightness as soon as I reach grub. Maybe he is making the OS forget about my last values, overriding it with its? Does someone knows how to solve this? Thanks in advance :) PS: I'm using bumblebee with Nvidia driver 304, but this issue existed before I installed it.

    Read the article

  • Need Help with partitions and such Dual Booting 13.10 w/ windows 7

    - by Aymax
    so I've spent the past couple days freaking out about this and looking for answers, and I decided to resort to asking on forums. probably should have before I wasted 2 entire days. so I am trying to DUAL-INSTALL Ubuntu 13.10 with my x64 Windows 7 home premium computer. I have 6 gb of ram, 1TB hard drive, and a 3.3GHZ dual core processer (just in case it matters). I've managed to figure some things out. I've burned the ubuntu files onto a DVD, and I have been able to successfully run it off the disk. I also shrunk my Windows partition by 120Gb and partitioned that for Ubuntu (all using the windows Disk Manager). Problems: When I turn my computer on with the DVD in the tray, the computer cant find windows. it flashes a screen real quick that says something about not being able to find an operating system, and then goes to "grub" and asks what i want to do with Ubuntu. this scares me, because I don't know if that means that I will not be able to boot windows if I install Ubuntu. The Ubuntu 13.10 installer does not detect my Windows operating system. I only have the options to Erase everything on my drive, or "something else." I choose that, which brings me to 3 I don't understand the partition table. I have no idea which drive im selecting to install stuff on, much less which one to select. I tried to tell by the amount of memory partitioned off, but none of the numbers seem to be accurate. Plus, all the names are dev/sda(#). I know Ubuntu knows the name of my partition, because on the sidebars it shows the names of the different drives, including the partition I made; so why don't they use the names? I have no idea what I'm going to be erasing. I've read that I should know which is which by the file system type, but they are all NTFS, including the one I made. my only other option was FAT, none for EXT2 or any of that like people said to do. My main concerns are that of accidentally erasing windows or not being able to access windows. any feasible solution is helpful, weather it helps me with the install or to make Ubuntu see windows. I realize this question has been asked much, but i have found no feasible answers so far. I am relatively new to this, and have never installed an operating system before, so I do not know most of the jargon. please keep it relatively simple, please. I am not a programmer. Thanks.

    Read the article

  • Ubuntu 12.4 not listed while in boot menu

    - by radkrish
    I am using Dell Inspiron 17R with Windows7 as the primary OS to boot my system up. I am new to Linux and to begin with, I thought of installing Ubuntu 12.4 AMD 64 bit version on my laptop. Today I performed a successful installation on my laptop but when I reboot, it doesn't show me the Ubuntu OS in the list (I can only see Windows7). Is there any way to bring up the Ubuntu entry into this list? While installing I selected the option to have both Windows7 and Ubuntu OS on my laptop. The root drive for both OS is C: drive. Hence I split the drive into two (250 GB for Windows7 and 250 GB for Ubuntu). Now I can only see 250GB in my C:\ drive for Windows7. Is the remaining 250GB assigned to Ubuntu or did I lose that 250GB space?? Your answers will be highly appreciated..

    Read the article

  • low volume/dual boot

    - by user2367
    I have an intel Imac dual-booting Ubuntu 10.04 and OSX 10.6. Both work fine, but sound is very quiet in Linux, even though the gnome volume control panel and pulse audio volume control panels are both set to 100%. I can turn the speaker volume up and it's fine, but then when I boot back to OSX the volume makes me jump out of my skin. Is there a setting I'm missing? If I turn the gnome sound pref volume higher then 100, it tends to distort the sound. (crackling)

    Read the article

  • CellC data card not recognized if I boot with it in

    - by Armien
    In 11.10 I find that I can connect to the internet via broadband connection successfully. The problem is that I cannot have the data card attached to the machine while the machine boots up. If I leave the data card in the machine during startup, the data card is not picked up and I then cannot connect to the internet. I must first boot up my machine, login, attach the data card into the usb port, wait so 30 seconds. The broadband connection name will then appear in the network dropdown at the top of the screen. An internet connect is now possible via broadband. Please let me know what must be done to fix this.

    Read the article

  • My EEEPc 900HA won't turn on/boot. Can it be fixed or does it need to be sent in?

    - by th3dude19
    My EEEPc 900HA stopped booting up out of nowhere. It went to sleep and when I went to wake it up, it wouldn't wake up. I powered down and went to power back up, but no go. The power light comes on solid and the battery/corded power light blinks consistently. There is no HDD activity or light activity. No BIOS. Just the lights described. I've troubleshooted the RAM, HDD, and internal power connections and everything checked out both on battery power and corded power. I've also reset the CMOS to no avail. What else can I do?

    Read the article

  • How to make sure that grub does use menu.lst?

    - by Glen S. Dalton
    On my Ubuntu 9.04 ("Karmic") laptop I suspect grub does not use the /boot/grub/menu.lst file. What happens on boot is that I see a blank screen and nothing happens. When I press ESC I see a boot list which is different from what I would expect from the menu.lst file. The menu lines are different and when I choose the first entry it does not use the kernel options that are in the first entry in menu.lst. Where do the entries that grub uses come from? How can I find out what happens, is there a log? I could not find anything in /var/log/syslog or /var/log/dmesg about grub using a menu.lst. How can I set it to work like expected? Some Files: $ sudo ls -la /boot/grub/*lst -rw-r--r-- 1 root root 1558 2009-12-12 15:25 /boot/grub/command.lst -rw-r--r-- 1 root root 121 2009-12-12 15:25 /boot/grub/fs.lst -rw-r--r-- 1 root root 272 2009-12-12 15:25 /boot/grub/handler.lst -rw-r--r-- 1 root root 4576 2010-03-19 11:26 /boot/grub/menu.lst -rw-r--r-- 1 root root 1657 2009-12-12 15:25 /boot/grub/moddep.lst -rw-r--r-- 1 root root 62 2009-12-12 15:25 /boot/grub/partmap.lst -rw-r--r-- 1 root root 22 2009-12-12 15:25 /boot/grub/parttool.lst $ sudo ls -la /vm* lrwxrwxrwx 1 root root 30 2009-12-12 16:15 /vmlinuz -> boot/vmlinuz-2.6.31-16-generic lrwxrwxrwx 1 root root 30 2009-12-12 14:07 /vmlinuz.old -> boot/vmlinuz-2.6.31-14-generic $ sudo ls -la /init* lrwxrwxrwx 1 root root 33 2009-12-12 16:15 /initrd.img -> boot/initrd.img-2.6.31-16-generic lrwxrwxrwx 1 root root 33 2009-12-12 14:07 /initrd.img.old -> boot/initrd.img-2.6.31-14-generic The only menu.lst that I found: $ sudo find / -name "menu.lst" /boot/grub/menu.lst $ sudo cat /boot/grub/menu.lst # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) #hiddenmenu # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro noresume ## default grub root device ## e.g. groot=(hd0,0) # groot=70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 ## defoptions=quiet splash # defoptions=apm=on acpi=off ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 9.10, kernel 2.6.31-14-generic noresume uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro quiet splash apm=on acpi=off noresume initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, kernel 2.6.31-14-generic (recovery mode) uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro sing le initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, memtest86+ uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /memtest86+.bin ### END DEBIAN AUTOMAGIC KERNELS LIST These are the choices that grub displays after i press ESC: Ubuntu, Linux 2-6-31-16-generic Ubuntu, Linux 2-6-31-16-generic (recovery mode) Ubuntu, Linux 2-6-31-14-generic Ubuntu, Linux 2-6-31-14-generic (recovery mode) Memory test (memtest86+) Memory test (memtest86+, serial console 115200)

    Read the article

  • Preserving smart playlist order on iPhone

    - by Doug Harris
    I have a smart playlist configured to play my favorite podcasts during my commute. It's a list of audio-only, unheard podcasts: In iTunes, I've ordered the playlist by Release Date -- i.e. I want to listen to the oldest podcast episodes first. The order is correct in iTunes but when I sync to my iPhone the order is jumbled. Currently, I have five episodes in this playlist -- ordered by release date they're A,B,C,D,E. On my iPhone, they're ordered B,D,C,E,A. There's no sort order that's obvious to me -- not sorted by name of episode, name of podcast, length of episode, date added, etc. Any solutions to ordering smart playlists on the iPhone? Update: This is likely an iTunes 9 bug. There's lots of discussion about this over on apple.com

    Read the article

  • Windows Server 2012 - SSL Cypher Suite Order Not Long Enough

    - by Sam
    I want to re-order the cypher suites on our new Windows Server 2012 box to help mitigate the BEAST vulnerability for our clients. I went to Local Group Policy => Computer Configuration => Administrative Templates => Network => SSL Configuration Settings, opened SSL Cypher Suite Order, enabled it, and copied the values from the SSL Cypher Suites textbox. I pasted them into notepad, re-ordered them, then copied+pasted them back into the SSL Cypher Suites textbox. However, the box isn't long enough to hold them all, despite the fact that the length didn't change. I would have to drop the last 3 cyphers (SSL_CK_DES_192_EDE3_CBC_WITH_MD5,TLS_RSA_WITH_NULL_SHA256,TLS_RSA_WITH_NULL_SHA) in order for it to fit. Should I just drop them? Other ideas?

    Read the article

  • htaccess order Deny,Allow rule

    - by aspiringCodeArtisan
    I'd like to dynamically add IPs to a block list via htaccess. I was hoping someone could tell me if the following will work in my case (I'm unsure how to test via localhost). My .htaccess file will have the following by default: order allow,deny allow from all IPs will be dynamically appended: Order Deny,Allow Allow from all Deny from 192.168.30.1 The way I understand this is that it is by default allow all with the optional list of deny rules. If I'm not mistaken Order Deny,Allow will look at the Deny list first, is this correct? And does the Allow from all rule need to be at the end?

    Read the article

  • Personal Technology – Laptop Screen Blank – No Post – No BIOS – No Boot

    - by Pinal Dave
    If your laptop Screen is Blank and there is no POST, BIOS or boot, you can follow the steps mentioned here and there are chances that it will work if there is no hardware failure inside. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Those, who care about how I come up with this not SQL related blog post, here is the very funny true story. If you are a married man, you will know what I am going to describe next. May be you have faced the same situation or at least you feel and understand my situation. My wife’s computer suddenly stops working when she was searching for my daughter’s mathematics worksheets online. While the fatal accident happened with my wife’s computer (which was my loyal computer for over 4 years before she got it), I was working in my home office, fixing a high priority issue (live order’s database was corrupted) with one of the largest eCommerce websites.  While I was working on production server where I was fixing database corruption, my wife ran to my home office. Here is how the conversation went: Wife: This computer does not work. I: Restart it. Wife: It does not start. I: What did you do with it? Wife: Nothing, it just stopped working. I: Okey, I will look into it later, working on the very urgent issue. Wife: I was printing my daughter’s worksheet. I: Hm.. Okey. Wife: It was the mathematics worksheet, which you promised you will teach but you never get around to do it, so I am doing it myself. I: Thanks. I appreciate it. I am very busy with this issue as million dollar transaction are not happening as the database got corrupted and … Wife: So what … umm… You mean to say that you care about this customer more than your daughter. You know she got A+ in every other class but in mathematics she got only A. She missed that extra credit question. I: She is only 4, it is okay. Wife: She is 4.5 years old not 4. So you are not going to fix this computer which does not start at all. I think our daughter next time will even get lower grades as her dad is busy fixing something. I: Alright, I give up bring me that computer. Our daughter who was listening everything so far she finally decided to speak up. Daughter: Dad, it is a laptop not computer. I: Yes, sweety get that laptop here and your dad is going to fix the this small issue of million dollar issue later on. I decided to pay attention to my wife’s computer. She was right. No matter what I do, it will not boot up, it will not start, no BIOS, no POST screen. The computer starts for a second but nothing comes up on the screen. The light indicating hard drive comes up for a second and goes off. Nothing happens. I removed every single USB drive from the laptop but it still would not start. It was indeed no fun for me. Finally I remember my days when I was not married and used to study in University of Southern California, Los Angeles. I remembered that I used to have very old second (or maybe third or fourth) hand computer with me. In polite words, I had pre-owned computer and it used to face very similar issues again and again. I had small routine I used to follow to fix my old computer and I had decided to follow the same steps again with this computer. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Once I followed above process, her computer worked. I was very delighted, that now I can go back to solving the problem where millions of transactions were waiting as I was fixing corrupted database and it the current state of the database was in emergency mode. Once I fixed the computer, I looked at my wife and asked. I: Well, now this laptop is back online, can I get guaranteed that she will get A+ in mathematics in this week’s quiz? Wife: Sure, I promise. I: Fantastic. After saying that I started to look at my database corruption and my wife interrupted me again. Wife: Btw, I forgot to tell you. Our daughter had got A in mathematics last week but she had another quiz today and she already have received A+ there. I kept my promise. I looked at her and she started to walk outside room, before I say anything my phone rang. DBA from eCommerce company had called me, as he was wondering why there is no activity from my side in last 10 minutes. DBA: Hey bud, are you still connected. I see um… no activity in last 10 minutes. I: Oh, well, I was just saving the world. I am back now. After two hours I had fixed the database corruption and everything was normal. I was outsmarted by my wife but honestly I still respect and love her the same as she is the one who spends countless hours with our daughter so she does not miss me and I can continue writing blogs and keep on doing technology evangelism. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Humor, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • DRUPAL: order exposed filter items, be carefully it is not that simple (I cannot user "Sort")

    - by Patrick
    hi, DRUPAL question. I'm using Views, with an exposed filter (Taxonomy). I've downloaded the "better exposed filter" module to display it as checkbox list. a Now, how can I order the tags in the filter list ? "Views Sort" is not the solution because I only can order articles but not the filter items!! I want to add an option (checkbox) for the customer to order the tags alphabetically or leave them in the default order. thanks

    Read the article

  • How does MySQL's ORDER BY RAND() work?

    - by Eugene
    Hi, I've been doing some research and testing on how to do fast random selection in MySQL. In the process I've faced some unexpected results and now I am not fully sure I know how ORDER BY RAND() really works. I always thought that when you do ORDER BY RAND() on the table, MySQL adds a new column to the table which is filled with random values, then it sorts data by that column and then e.g. you take the above value which got there randomly. I've done lots of googling and testing and finally found that the query Jay offers in his blog is indeed the fastest solution: SELECT * FROM Table T JOIN (SELECT CEIL(MAX(ID)*RAND()) AS ID FROM Table) AS x ON T.ID >= x.ID LIMIT 1; While common ORDER BY RAND() takes 30-40 seconds on my test table, his query does the work in 0.1 seconds. He explains how this functions in the blog so I'll just skip this and finally move to the odd thing. My table is a common table with a PRIMARY KEY id and other non-indexed stuff like username, age, etc. Here's the thing I am struggling to explain SELECT * FROM table ORDER BY RAND() LIMIT 1; /*30-40 seconds*/ SELECT id FROM table ORDER BY RAND() LIMIT 1; /*0.25 seconds*/ SELECT id, username FROM table ORDER BY RAND() LIMIT 1; /*90 seconds*/ I was sort of expecting to see approximately the same time for all three queries since I am always sorting on a single column. But for some reason this didn't happen. Please let me know if you any ideas about this. I have a project where I need to do fast ORDER BY RAND() and personally I would prefer to use SELECT id FROM table ORDER BY RAND() LIMIT 1; SELECT * FROM table WHERE id=ID_FROM_PREVIOUS_QUERY LIMIT 1; which, yes, is slower than Jay's method, however it is smaller and easier to understand. My queries are rather big ones with several JOINs and with WHERE clause and while Jay's method still works, the query grows really big and complex because I need to use all the JOINs and WHERE in the JOINed (called x in his query) sub request. Thanks for your time!

    Read the article

  • sort given set of colors in VIBGYOR order

    - by Vijay Selvaraj
    Hi, how do i order a given set of colors from the rainbow in VIBGYOR order. say i input the seven colors in the following order { red, blue, green, yellow, indigo, violet, orange} and i should print the output as {violet, indigo, blue, green, yellow, orange, red}, irrespective of the order i give the output should be as above. Can someone suggest me about implementing this in java program? Thanks, -Vijay

    Read the article

  • Optimize MYSQL Query with Order by

    - by Victor
    Hello, I have seen mysql queries with order by runs slow. Is there any specific way to optimize queries which use order by ? Queries without order by run very fast but with order by its always runs slow. if any one suggest any thing on this as general solutions. Thank You

    Read the article

  • Select Top N Records Ordered by X, But Have Results in Reverse Order

    - by I. J. Kennedy
    I'm trying to get the top N records (when ordered by some column X), but have the result set in reverse order. The following statement is incorrect, but probably demonstrates what I'm after: SELECT * FROM (SELECT TOP 10 * FROM FooTable ORDER BY X DESC) ORDER BY X ASC For example, column X could be an ID or a timestamp; I want the latest 10 records but want them returned in forward chronological order.

    Read the article

  • Saving order of a List in JPA

    - by Rosen Martev
    Hello, I have the following question about JPA: Can I save the order of the elements in a java.util.List? In my application the order in which I put elements in the Lists is important but after I get those collections from the database the order is not the same (as expected). Can you show me a way to deal with this problem? P.S. There is not a field in the entities that I put in the collections by which I can order them. Rosen

    Read the article

  • NServiceBus specify order of Handlers execution

    - by John Simons
    Just wondering if this is the way to specify the order to run a handler (AuthorizationHandler) before all others? public void SpecifyOrder(Order order) { order.Specify(First<AuthorizationHandler>.Then<IHandleMessages<IMessage>>()); } It just feels odd to add Then<IHandleMessages<IMessage>>(). Is there a nicer way of saying to the Bus execute x handler before all others?

    Read the article

  • Replace dual-XP installs with single-XP install and repartition drive?

    - by caeious
    Hello, The Current Situation I have a hard drive that currently is split up like so: Primary Partition C: 9.77 GB NTFS Healthy (System) with XP Pro (in Polish) installed Extended Partition D: 39.82 GB NTFS Healthy (Boot) with XP Pro (in English) installed 6.30 GB Free space When I start my comuter I get a black and white Windows Boot Manager dual boot screen with 2 choices both being Microsoft Windows XP. The first choice is the English version of XP and the second choice is the Polish version of XP. Images of my Computer Management window and Dual Boot screen The Mission What I need to do is get rid of the entire extended partition (D: 39.82 GB & 6.30 free space) and just have the one primary C: drive which I assume will be somewheres around 55 GB big. So in the end I just want XP Pro in English running on my C: drive and no black and white boot screen to show up when starting up my laptop. The Question How do I go about successfully completing The Mission with out making my computer a useless pile of silicon, plastic and metal? UPDATE: So I went ahead and tried to follow Neal's suggestion but hit a wall. I got to a Windows XP Pro install screen that had the 3 following options as well as my drive data: To set up Windows XP on the selected item, press Enter To create a partition in the unpartitioned space, press C To delete the selected partition, press D 57232 MB Disk 0 at Id 0 on bus 0 on atapi [MBR] C: Partition1 [NTFS] 10001 MB ( 4642 MB free ) Unpartitioned space 6448 MB D: Partition2 [NTFS] 40774 MB ( 26225 MB free ) Unpartitioned space 8 MB I figured I would go with the first choice ((To set up Windows XP on the selected item, press Enter)) because I just wanted to set up Windows XP on C: Partition1 (which was preselected) so I pressed Enter which brought me to a screen displaying this message: You chose to install Windows XP on a partition that contains another operating system. Installing Windows XP on this partition might cause the other operating system to function improperly. CAUTION: Installing multiple operating systems on a single partition is not recommended. So this leads me to 2 new questions: How do I get rid of the Windows XP (Polish language) install on C: Partition 1 so that I can cleanly and safely install Windows XP (English language) on it? Neal, is this what you meant by me possibly having to delete the partition that the Windows XP (Polish language) install was located on? Since I have the option to delete partitions with the 3rd choice ((To delete the selected partition, press D)), should I do that on this screen or wait until I have Windows XP (English language) safely installed on C: Partition 1? I have to ask these questions because I have read that it is possibly dangerous to delete hard drive partitions. Just being cautious.

    Read the article

  • Kernel upgrade CentOS 5.3 mount: could not find filesystem '/dev/root'

    - by matt
    We have a CentOS 5.3 x64 server that by default runs kernel version 2.6.18-164.11.1 and we are attempting to upgrade the box to 2.6.31.12 The drive is LVM +ext3, and the problem I'm having is when I upgrade the kernel and attempt to boot from it, no matter what version of the kernel I use, I get /dev/root not found towards the end of the boot process, and the kernel panics, and than reboots. I'm installing the kernel exactly as it says in this doc. I've tried it "The centOS way " using make rpm and than installing that. I've updated my mkinitrd. The most interesting part of this problem is that it has been so frustrating that I decided to try and clean install centos on an identical machine without LVM, and the result is EXACTLY the same. After upgrading the kernel, I get /dev/root not found. Does anyone know how to fix this, or what information would be relevant to remedy it? I'm open to try anything at this point. One more interesting thing about this problem is that in the new version of the kernel, during boot it complains that dm-mapper is started twice, than panics right after that. I've tried this with other kernel versions, and the result is the same. What am I missing here? If you need any more files, please just ask. Linux cg 2.6.18-164.11.1.el5 #1 SMP Wed Jan 20 07:32:21 EST 2010 x86_64 x86_64 x86_64 GNU/Linux /dev/VolGroup00/LogVol00 / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0 default=1 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.31.12-rt20) //NOT WORKING!!!! root (hd0,0) kernel /vmlinuz-2.6.31.12-rt20 ro root=/dev/VolGroup00/LogVol00 isolcpus=8,9,10,11,12,13,14,15 panic=10 initrd /initrd-2.6.31.12-rt20.img title CentOS (2.6.18-164.11.1.el5) //WORKING!! root (hd0,0) kernel /vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/VolGroup00/LogVol00 isolcpus=8,9,10,11,12,13,14,15 panic=10 initrd /initrd-2.6.18-164.11.1.el5.img

    Read the article

  • Unknown problem causing major computer failure, Booting problem with windows 7, mainly with 0x0000000A

    - by ken
    Where do I begin? OS=Windows 7 I think it all started when I ran an installation file. I suspect it may have been a virus (even though AVG scan didnt pick anything up). The installation failed, computer crashed then restarted. In the middle of the reboot, I get BSOD. Normal boot up doesnt work so I use safe mode. Method 1: Not a problem I thought cos I will do what I normally do and that was to recover from my image file. Unfortunately, my Acronis software cant recover in safe mode. Method 2: I created a bootable disc for the Acronis recovery software. Managed to boot to Acronis and started the recovery from image file. This fail with some error message (did not manage to record). Something to do with not be able to copy to $AVG folder. Method 3: At this stage, assumed it was still a virus causing the problem so decided to format that partition to remove everything and hopefully the virus too. Had a lot of problems trying to bypass the system to allow me to format but (i think- more on this later) I managed to do that. Image was recovered, thought problem was resolved. Tried to boot windows but new error: Boot Manager is missing. Read up on this and managed to copy the Boot Manager from my Laptop's Manufacturer's partition (partition contains factory setup image file). Windows loaded but new BSOD with 0x000000A problem. Method 4: Attempted to reinstall factory settings but this failed cos i suspect by formating the partition, I may have removed the recovery software. Tried to create a bootable dvd of factory setting but machine is so bad it continues to crash. Bootable dvd method failed. Method 5:Spent alot of time reading up on this error, even installed a software to help scan and fix the problem. Scan failed and software required money! Anyway, lots of BSOD with different error message like 0x00000001A and 0x0000000D1. Error message changes with some reboots. Method 6: Found a hotfix from the windows site to fix 0x0000000A problem, great I thought! In safe mode, I cant install the file cos of error:0x8007043c. Tried to then install the fix in normal mode but installation just hangs. Returned to safe mode and followed advice to bypass 0x8007043c by changing the BITS status (read here: http://www.vistaheads.com/forums/microsoft-public-windowsupdate/181931-error-number-0x8007043c-windows-update.html). However, my machine at this time is so flaky that it hangs everytime i right mouse click the computer icon. I am at my wits end. Ya help or ideas? Cheers

    Read the article

  • Can't run init script on boot after another init script

    - by Colin McQueen
    I have three init scripts and the Broker init script runs fine, but when I try to run the Consumer init script and then the Data Collector init script, the only process that is running is the Broker. I added the symbolic links to the run levels using update-rc.d for each script and I also changed the number prefixes in the symbolic links to try and run the scripts in the proper order but that did not work. I am able to run the scripts from the terminal and they work fine but they need to all be started on boot. Any ideas as to why my other scripts are not running? Also inside my Consumer and Data Collector I am running: su user1 -c 'java -jar foo.jar' to start the services. Also the Consumer Java class sits and waits for a message from the queue, so the Java code does not stop until I specify the stop argument for the init script. The Broker has to start first, then the Consumer, then the Data Collector. Adding the symbolic links for the runlevels: sudo update-rc.d Broker defaults 10 90 sudo update-rc.d Consumer defaults 15 85 sudo update-rc.d DataCollector defaults 20 80

    Read the article

  • Oracle Storage Implementation Boot Camp: ZFS Storage Appliance and Flash

    - by mseika
    Oracle Storage Implementation Boot Camp: ZFS Storage Appliance and Flash Thursday 20th September 9.30 – 16.30 This is 1-day, face-to-face training is designed for your Storage Implementation Specialists and will help them in their path to Specialisation, as they prepare for the Storage Implementations Assessments for ZFSSA. Please read carefully the notes below on the required equipment for attendees. Agenda Module 1: Product Overview Module 2: Installation and Configuration ZFS Lab 1: Installation Module 3: Clustering Module 4: File and Data Services ZFS Lab 2: Creating Projects ZFS Lab 3: Creating a Share ZFS Lab 4: Snapshots and Clones ZFS Lab 5: CLI Overview Module 5: Maintenance ZFS Lab 6: Dashboard overview Module 6: Analytics ZFS Lab 7: Analytics Prerequisites for attendees Provide basic administration support for the Solaris OS and/or Windows Desktop/Server OS Understand the fundamentals of data storage administration Understand the fundamentals of Transmission Control Protocol/Internet Protocol (TCP/IP) networking and administration Troubleshoot server and network system software and hardware IMPORTANT: Equipment that attendees will have to bring to the class The attendees must bring their own laptops and have successfully installed the Virtual Box instance and the 7000 Series Simulator. To download Virtual Box and the Simulator click here. Attendees must have the Simulator running in advance of the class. For technical support on the download/installation of the Simulator, please send email to [email protected] Please register here

    Read the article

  • Cedarview drivers boot to a blank screen

    - by map7
    I'm following the tutorial following tutorial to get my Intel D2700DC motherboard's graphics working: http://daily.siebler.eu/2012/06/ubuntu-12-04-driver-for-intel-cedarview-atom-n2000-und-d2000-serie/ When I boot I'm getting a blank screen. I followed the tutorial and read all the comments. I've also tried: Install gdm and use this instead of lightdm (ubuntu default) sudo apt-get install gdm Remove previous pae kernel: http://www.liberiangeek.net/2011/11/remove-old-kernels-in-ubuntu-11-10-oneiric-ocelot/ Reboot before adding cedarview packages. Have tried with and without the "video=LVDS-1:d" to GRUB_CMDLINE_LINUX_DEFAULT variable in /etc/default/grub I still get a blank screen. I am plugged into a HD screen through the HDMI and have tried the DVI connector also. I can see the grub menu, then a little of the loading and then 'No signal'. I can still ssh into the box though so it is logging in. lspci -v -s 00:02.0 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device 2011 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at 80100000 (32-bit, non-prefetchable) [size=1M] I/O ports at 20d0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: pvrsrvkm Kernel modules: cedarview_gfx uname -a Linux test-desktop 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:45:18 UTC 2012 i686 i686 i386 GNU/Linux

    Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >