Search Results

Search found 8815 results on 353 pages for 'major upgrade'.

Page 93/353 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

  • Apt Stalls When Using HTTP Sources

    - by UltraNurd
    I was getting some to me inexplicable behavior from apt-get/aptitude on an admittedly crusty old webserver. While it was otherwise running fine, as soon as I tried a package upgrade, after a downloading a few updates it would stall completely, then my SSH session hung (and I was unable to reconnect), thus requiring a hard restart. First, I switched to a different package source in /etc/apt/sources.list, but still got the same behavior. At this point I was assuming the NIC was dying in some weird way... but as soon as I changed the package source to use FTP instead of HTTP, everything worked fine, and I was able to upgrade. For now I'm not too concerned since I have an easy work around, but it implies that there's something very weird with my network setup, since it seems to be protocol (or port?) specific. I didn't think any of my NAT setup would affect outbound traffic, but I could be crazy. Any ideas what I should try to look for?

    Read the article

  • Upgrading from 32 to 64 Bit Windows 7, without losing program installations/games

    - by Fogest
    I recently built a new computer and put the wrong installation of Windows on (32 bit), meaning I cannot use all of my RAM. I would like to upgrade to the 64 bit version, though I already have downloaded many programs and games which would total to around 30 GB give or take. I don't have the kind of data usage with my ISP to re-download this much data again, until next month (total GB will be higher as time goes on). I know there is Windows Easy Transfer, but it is not so much my data itself I'm worried about, it is more having to re-download and install a bunch of games and applications. Is it possible to perform an upgrade from 32 bit to 64 bit without this loss?

    Read the article

  • Updating to Exchange 2013 - any way to do it now?

    - by TomTom
    Exchange 2013 is out, available for some epople already. Got if from the VLC Center, now trying to get an upgrade path that works for some customers. Problem: There is no upgrade. It is "install on new Server, move mailboxes. This means coexistence with Exchagne 2010 for the time to move the Mailbox. Sadly the only compatible Exchange is Exchange 2010 Sp3 - which is not going to be bout for quite some time. Any way to still do an update? Backup, restore to new Server? Any beta of the SP that is good enough to ONLY move the mailboxes? I do not care about the rest - this really is "install Exchange 2013, move mailboxes, UNINSTALL 2010". I am quite - ah - unhappy that at the end the only one who will be able to intall 2013 are new companies right now.

    Read the article

  • ESXi 4 failed to find boot device

    - by phil
    I had exsi 3.5 running just fine, the upgrade to 4 failed ( i thought it would so everything is backed up ). but it did boot just could not import the data store So i did a fresh install of ESXi 4. Now it says failed to find boot device. Not sure why. i have wiped the disk, the controller is a adaptec 3405, it worked fine in 3.5 and when i upgrade to 4 it did boot. Now it just hangs at loading vfat. then the failed to find boot device. Any ideas?

    Read the article

  • ubuntu lucid: blank screen AFTER login. Please help!

    - by keisimone
    Hi there, after i did a partial upgrade my screen went blank. I think i used an onboard graphics card but i cannot be sure. Please advise me. i tried Ctrl+Alt+F1 at startup and did a apt-get upgrade and apt-get update. Didn't work. Am very frustrated after spending 3 days to get ubuntu to work for it to kill my screen the moment i did a first update. Please help.

    Read the article

  • Can I use a micro ec2 instance as a load balancer for my other large ec2 instances?

    - by Ryan Detzel
    The issue I'm having is I want to upgrade that instance often(security patches, etc) but I'm affriad something will fail and the site will be down. So, I want to have another server setup and load balance between the two that way I can easily disable one, upgrade it and once it's working add it back in the mix and repeat. What kind of machine is needed for a load balancer? Would the micro instance work just fine? The site gets anywhere from 3-10k hits/day. I plan on using nginx as the load balancer.

    Read the article

  • Comparison of Unix shells

    - by Andy White
    Of the major Unix shells (bash, ksh, tcsh, zsh, others?), are there any compelling reasons to use one over another? Which is the most interactive/command-line friendly? Which is the most conducive/intuitive for writing scripts? Are there any major built-in features that one shell offers that others don't? Are any of these shells really good for one type of function, but not another? Or are they all pretty well-rounded/flexible? Is it just a matter of personal preference? I can make this community wiki if anyone prefers.

    Read the article

  • Lan DNS not working after reinstall of Ubuntu 13.10

    - by DrorCohen
    I upgrade my Ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's host name. I get "Unknown Host". However pinging from another computer on the same lan - works fine (a laptop with 12.04 lts). for that matter every ping from the 13.10 to the local lan by hostname fails, ping with ip works. I don't have a local DNS server but somehow all the other computers in the network find each other by host name - only this new one fails... help appreciated...

    Read the article

  • Will installing an Ultra ATA cable backwards affect performance?

    - by GMMan
    I've recently purchased a hard drive upgrade for my Xbox 320GB WD Caviar Blue WD3200AAJB and StarTech.com Ultra ATA/66/100/133 cable IDE66 yes I'm crazy When it came to installing the cable, it was too short (my fault), and there wasn't enough space between the master and slave ends to reach both the DVD drive and the hard drive. The only thing I could do was install the cable backwards and twisting it quite a bit to make it fit. The upgrade works, but reading the manual for the hard drive I replaced (10GB Seagate U Series 5), apparently there is a specific way you have to connect the cable. I don't have that option, so the question comes down to, will my drive performance be at Ultra ATA levels, or is it still performing at original ATA speeds? Is there any way I can test this (benchmarking software for Xbox)?

    Read the article

  • HP p410i array controller - what happens if i add memory?

    - by James
    I have a p410i array controller that only has 256ram. We want to create a raid 5 so we have procured a 512 write back cache module. If we install the write back cache, will this erase the existing raid information. The server currently has 2 disks in raid 1. 6 are spare waiting for an upgrade to create a raid 5. the concern is if we replace/upgrade the memory for the controller, we will wipe the existing production raid 1 array. Thanks in advance.

    Read the article

  • copy WinXP Home recovery files to new SSD

    - by maGz
    My wife's Samsung netbook, which has Windows XP Home Edition OEM and a 5400 SATA 2 HDD, has finally crawled to (almost) a halt, and I've decided to install an OCZ SSD into it. The problem is that the machine came with no recovery media, but the recovery partition exists and I can boot into it. How can I go about creating a bootable DVD from that partition, and then boot off that to install on the SSD? NOTE: My aim after this is to upgrade to Windows 7 Home Premium, as the upgrade option is a lot cheaper than purchasing a retail or DSP equivalent.

    Read the article

  • Debian - Can't stop MySQL; permissions?

    - by anon
    I just tried to upgrade from debian squeeze to unstable by replacing 'squeeze' with 'unstable' in /etc/apt/sources.list. The upgrade went smoothly except for mysql, which failed because it couldn't stop mysql. /etc/init.d/mysql stop simply returns that it failed, but if I try to get the status with /etc/init.d/mysql status it gives me this error: me@debian:~$ sudo /etc/init.d/mysql status /usr/bin/mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'debian-sys-maint'@'localhost' (using password: YES)' . mysql is running fine, and I checked the permissions for debian-sys-maint in phpmyadmin and it's allowed to do everything, but only connect from 'localhost.'

    Read the article

  • smbclient -L host works. ping host doesn't work. What is missing

    - by DrorCohen
    I upgrade my ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's netbios name. I get "Unknown Host". However running smbclient -l HostName - give me all the output in the world. Stracing the ping I can it tries to use resolv.conf (expected fail) and then when accessing mdns stuff it fails (no mdns.allow file) and exits. Here's the host line from /etc/nsswitch.conf: hosts: files wins mdns4_minimal [NOTFOUND=return] dns mdns4 I've added wins right after files (and also tried before dns. Nothing helps. Reboot after every change. What am I missing?

    Read the article

  • Do you think Microsoft is finally on the right track with its Windows 7?

    - by Saif Bechan
    It has been a while now since Windows 7 has been released. So far I didn't hear of many major complaints about it. I can remember the time that Windows Vista hist the shelves. There were major complaints from both experts and just regular users. I do a lot of OS installs for just regular users. These are mostly family and friends, and sometimes there are some customers. Up till now I mostly still use Windows XP SP3, because it is stable and most people are familiar with it. I did Vista for some users but they always call me back with all sorts of questions and in the end I had to downgrade them to XP. Do you think it is safe now to recommend Windows 7 as a good operating system? Offcourse their hardware has to support it, but let's say that is the case. If you install Windows 7 a lot for people, what are the complaints about if you get them?

    Read the article

  • After a week of smooth running, my Dell t310 servername reverted to the service tag and screwed everything up!

    - by user779887
    Has this happened to anyone else? Began having a tremedous amount of problems with our brand new Dell SBS 2011 T310 server and after nearly 15 hours will Dell support, they determined that the server name hade reverted to DXXXXXXXX ("D: + the service tag). The Dell tech said that this was a major major problem. I'm the only person with any access to the machine and I didn't attempt to change the server name. The tech said it didn't look as if anyone had hacked the box but something had replaced "OurCompanyServer" with "DXX12XX" It would seem to me, simply changing the server name back to what I originally had would correct the problem, but the Dell tech said it wasn't that easy. Anyone encounter this?

    Read the article

  • Hyper-V R2 as a VM on another virtual OS

    - by Tim
    I am trying to perform Microsoft Platform testing for a vendor application. The problem I have is that it requires the test be done on Windows Server 2008 as a VM on Hyper-V R2. Currently, I have access to a virtual server with just Hyper-V and also have access to an ESXi server. The crazy idea (which may just show how little I know about how virtualization technology works) is to install Hyper-V R2 as a VM onto one of these other servers. Then create a VM for Windows Server 2008 on this Hyper-V R2 VM. I can not just upgrade the current Hyper-V server as the VMs currently running would need to be taken off-line and are system critical (and I don't have rights to perform this upgrade). Has anyone tried this? Will this even work?

    Read the article

  • I want to easily switch accounts for Twitter - is there a Firefox/Chrome/IE plug-in to do this?

    - by Edelcom
    I have several Twitter accounts to which I post messages. One is a personal, one is a professional, and a couple for each software system I developed. Does any one know of a plug-in for one of the major web browses on Windows or program that allows me to easily login to multiple Twitter accounts and easily switch between them ? I now have the 4 major browsers installed on my computer , each with it's own Twitter account (with the password and login info saved), but I think there must be a better way. On a side note: it is getting harder and harder to know to which StackOverflow alike site a question must be posted. So I hope this question here is considered on-topic.

    Read the article

  • Most efficient hard drive configuration for multitasking system

    - by user99391
    I hope I didn’t screw up the tile. Currently I’m using for my system 2x500g Raid0 system. I’m thinking about an upgrade but I got hold up by few questions. I need at least 100-120 gb for my system and apps and looking for a technological upgrade also. I've end up with 3 choices. Single 120 ssd (sata 6 drive) 2x60 ssd drives, but I've heard it's not possible. PCI ssd drive (~120gb). They all have very similar read/write values and prices but I was wondering if anyone could give some tips on which way to go. I run win7x64 and do a lot of multitasking(especially adobe stuff).

    Read the article

  • Accessing a broken mdadm raid

    - by CarstenCarsten
    Hi! I used a western digital mybookworld (SOHO NAS storage using Linux) as backup for my Linux box. Suddenly, the mybookworld does not boot up any more. So I opened the box, removed the hard disk and put the hard disk into an external USB HDD case, and connected it to my Linux box. [ 530.640301] usb 2-1: new high speed USB device using ehci_hcd and address 3 [ 530.797630] scsi7 : usb-storage 2-1:1.0 [ 531.794844] scsi 7:0:0:0: Direct-Access WDC WD75 00AAKS-00RBA0 PQ: 0 ANSI: 2 [ 531.796490] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 531.797966] sd 7:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 531.800317] sd 7:0:0:0: [sdc] Write Protect is off [ 531.800327] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 531.800333] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803821] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803836] sdc: sdc1 sdc2 sdc3 sdc4 [ 531.815831] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.815842] sd 7:0:0:0: [sdc] Attached SCSI disk The dmesg output looks normal, but I was wondering why the hardisk was not mounted at all. And why there are 4 different partitions on it. fdisk showed the following: root@ubuntu:/home/ubuntu# fdisk /dev/sdc WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdc: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007c00 Device Boot Start End Blocks Id System /dev/sdc1 4 369 2939895 fd Linux raid autodetect /dev/sdc2 370 382 104422+ fd Linux raid autodetect /dev/sdc3 383 505 987997+ fd Linux raid autodetect /dev/sdc4 506 91201 728515620 fd Linux raid autodetect Oh no! Everything seems to be created as a mdadm software raid. Calling mdadm --examine with the different partitions seems to affirm that. I think the only partition I am interested in, is /dev/sdc4 (because it is the largest). But nevertheless I called mdadm --examine with every partition. root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 00.90.00 UUID : 5626a2d8:070ad992:ef1c8d24:cd8e13e4 Creation Time : Wed Feb 20 00:57:49 2002 Raid Level : raid1 Used Dev Size : 2939776 (2.80 GiB 3.01 GB) Array Size : 2939776 (2.80 GiB 3.01 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 1 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 4c90bc55 - correct Events : 16682 Number Major Minor RaidDevice State this 0 8 1 0 active sync /dev/sda1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 00.90.00 UUID : 9734b3ee:2d5af206:05fe3413:585f7f26 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 104320 (101.89 MiB 106.82 MB) Array Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 2 Update Time : Wed Oct 27 20:19:08 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 55560b40 - correct Events : 9884 Number Major Minor RaidDevice State this 0 8 2 0 active sync /dev/sda2 0 0 8 2 0 active sync /dev/sda2 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc3 /dev/sdc3: Magic : a92b4efc Version : 00.90.00 UUID : 08f30b4f:91cca15d:2332bfef:48e67824 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Array Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 3 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 39717874 - correct Events : 73678 Number Major Minor RaidDevice State this 0 8 3 0 active sync 0 0 8 3 0 active sync 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc4 /dev/sdc4: Magic : a92b4efc Version : 00.90.00 UUID : febb75ca:e9d1ce18:f14cc006:f759419a Creation Time : Wed Feb 20 00:57:55 2002 Raid Level : raid1 Used Dev Size : 728515520 (694.77 GiB 746.00 GB) Array Size : 728515520 (694.77 GiB 746.00 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 4 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 2f36a392 - correct Events : 519320 Number Major Minor RaidDevice State this 0 8 4 0 active sync 0 0 8 4 0 active sync 1 1 0 0 1 faulty removed If I read the output correctly everything was removed, because it was faulty. Is there ANY way to see the contents of the largest partition? Or seeing somehow which files are broken? I see that everything is raid1 which is only mirroring, so this should be a normal partition. I am anxious to do anything with mdadm, in fear that I destroy the data on the hard disk. I would be very thankful for any help.

    Read the article

  • How to log php error in a separate file?

    - by Question Overflow
    I just did an upgrade of my server to Fedora 17 and merged some configuration files containing .rpmnew into the existing ones. I have been successfully logging my php errors in a separate log file by keeping the following in php.ini: log_errors = On error_log = /var/log/php-errors.log I am not sure why the errors are being logged to /var/log/httpd/error_log after the upgrade despite keeping the settings above. Also, $ ls -l /var/log/php-errors.log -rwxrwxr--. 1 apache myself 232 Dec 13 16:49 /var/log/php-errors.log shows that apache did own the php error log file. What could be causing PHP errors to be logged into apache error log file?

    Read the article

  • Vostro 1520 crash during bios update

    - by Deadmilkman
    My Vostro 1520 (P8700 C2D) originally came with BIOS A02. This bios version have known problems with VT, so I had to upgrade to A05. During the upgrade, the notebook crashed. Needless to say, it won't boot anymore. The simple question is: is there a way to access the bios boot block to recover the bad flash with a crisis disk? I know that the MINI and the ALIENWARE models have this feature, but I can't seem to find anything about it in the Vostro machines. Any help will be much appreciated. PS: Dell's solution is to change the motherboard, but it will take several days, as the board isn't available in my country :( Regards, Deadmilkman

    Read the article

  • Windows Licensing Question [closed]

    - by user64300
    Hi, This is a fairly simple licensing question that has me confused. We have 3 servers: SERVER1,SERVER2,SERVER3 running on Windows Server 2003. We have 25 users. Do I need to buy 75 user licenses for the users to access all the servers or can I get by with 25? If I then upgrade 1 server to Windows Server 2008, do I need to buy a new set of user licenses. If I then upgrade the other 2, do I then need to buy 2 more sets of user licenses? Sorry for the confusion!

    Read the article

  • C# development with Mono and MonoDevelop

    - by developerit
    In the past two years, I have been developing .NET from my MacBook by running Windows XP into VM Ware and more recently into Virtual Box from OS X. This way, I could install Visual Studio and be able to work seamlessly. But, this way of working has a major down side: it kills the battery of my laptop… I can easiely last for 3 hours if I stay in OS X, but can only last 45 min when XP is running. Recently, I gave MonoDevelop a try for developing Developer IT‘s tools and web site. While being way less complete then Visual Studio, it provides essentials tools when it comes to developping software. It works well with solutions and projects files created from Visual Studio, it has Intellisence (word completion), it can compile your code and can even target your .NET app to linux or unix. This tools can save me a lot of time and batteries! Although I could not only work with MonoDevelop, I find it way better than a simple text editor like Smultron. Thanks to Novell, we can now bring Microsoft technology to OS X.

    Read the article

  • Employee Info Starter Kit - Visual Studio 2010 and .NET 4.0 Version (4.0.0) Available

    - by joycsharp
    Employee Info Starter Kit is a ASP.NET based web application, which includes very simple user requirements, where we can create, read, update and delete (crud) the employee info of a company. Based on just a database table, it explores and solves all major problems in web development architectural space.  This open source starter kit extensively uses major features available in latest Visual Studio, ASP.NET and Sql Server to make robust, scalable, secured and maintanable web applications quickly and easily. Since it's first release, this starter kit achieved a huge popularity in web developer community and includes 1,40,000+ download from project web site. Visual Studio 2010 and .NET 4.0 came up with lots of exciting features to make software developers life easier.  A new version (v4.0.0) of Employee Info Starter Kit is now available in both MSDN Code Gallery and CodePlex. Chckout the latest version of this starter kit to enjoy cool features available in Visual Studio 2010 and .NET 4.0. [ Release Notes ] Architectural Overview Simple 2 layer architecture (user interface and data access layer) with 1 optional cache layer ASP.NET Web Form based user interface Custom Entity Data Container implemented (with primitive C# types for data fields) Active Record Design Pattern based Data Access Layer, implemented in C# and Entity Framework 4.0 Sql Server Stored Procedure to perform actual CRUD operation Standard infrastructure (architecture, helper utility) for automated integration (bottom up manner) and unit testing Technology UtilizedProgramming Languages/Scripts Browser side: JavaScript Web server side: C# 4.0 Database server side: T-SQL .NET Framework Components .NET 4.0 Entity Framework .NET 4.0 Optional/Named Parameters .NET 4.0 Tuple .NET 3.0+ Extension Method .NET 3.0+ Lambda Expressions .NET 3.0+ Aanonymous Type .NET 3.0+ Query Expressions .NET 3.0+ Automatically Implemented Properties .NET 3.0+ LINQ .NET 2.0 + Partial Classes .NET 2.0 + Generic Type .NET 2.0 + Nullable Type   ASP.NET 3.5+ List View (TBD) ASP.NET 3.5+ Data Pager (TBD) ASP.NET 2.0+ Grid View ASP.NET 2.0+ Form View ASP.NET 2.0+ Skin ASP.NET 2.0+ Theme ASP.NET 2.0+ Master Page ASP.NET 2.0+ Object Data Source ASP.NET 1.0+ Role Based Security Visual Studio Features Visual Studio 2010 CodedUI Test Visual Studio 2010 Layer Diagram Visual Studio 2010 Sequence Diagram Visual Studio 2010 Directed Graph Visual Studio 2005+ Database Unit Test Visual Studio 2005+ Unit Test Visual Studio 2005+ Web Test Visual Studio 2005+ Load Test Sql Server Features Sql Server 2005 Stored Procedure Sql Server 2005 Xml type Sql Server 2005 Paging support

    Read the article

  • Employee Info Starter Kit - Visual Studio 2010 and .NET 4.0 Version (4.0.0) Available

    - by Mohammad Ashraful Alam
    Employee Info Starter Kit is a ASP.NET based web application, which includes very simple user requirements, where we can create, read, update and delete (crud) the employee info of a company. Based on just a database table, it explores and solves most of the major problems in web development architectural space.  This open source starter kit extensively uses major features available in latest Visual Studio, ASP.NET and Sql Server to make robust, scalable, secured and maintanable web applications quickly and easily. Since it's first release, this starter kit achieved a huge popularity in web developer community and includes 1,40,000+ download from project web site. Visual Studio 2010 and .NET 4.0 came up with lots of exciting features to make software developers life easier.  A new version (v4.0.0) of Employee Info Starter Kit is now available in both MSDN Code Gallery and CodePlex. Chckout the latest version of this starter kit to enjoy cool features available in Visual Studio 2010 and .NET 4.0. [ Release Notes ] Architectural Overview Simple 2 layer architecture (user interface and data access layer) with 1 optional cache layer ASP.NET Web Form based user interface Custom Entity Data Container implemented (with primitive C# types for data fields) Active Record Design Pattern based Data Access Layer, implemented in C# and Entity Framework 4.0 Sql Server Stored Procedure to perform actual CRUD operation Standard infrastructure (architecture, helper utility) for automated integration (bottom up manner) and unit testing Technology UtilizedProgramming Languages/Scripts Browser side: JavaScript Web server side: C# 4.0 Database server side: T-SQL .NET Framework Components .NET 4.0 Entity Framework .NET 4.0 Optional/Named Parameters .NET 4.0 Tuple .NET 3.0+ Extension Method .NET 3.0+ Lambda Expressions .NET 3.0+ Aanonymous Type .NET 3.0+ Query Expressions .NET 3.0+ Automatically Implemented Properties .NET 3.0+ LINQ .NET 2.0 + Partial Classes .NET 2.0 + Generic Type .NET 2.0 + Nullable Type   ASP.NET 3.5+ List View (TBD) ASP.NET 3.5+ Data Pager (TBD) ASP.NET 2.0+ Grid View ASP.NET 2.0+ Form View ASP.NET 2.0+ Skin ASP.NET 2.0+ Theme ASP.NET 2.0+ Master Page ASP.NET 2.0+ Object Data Source ASP.NET 1.0+ Role Based Security Visual Studio Features Visual Studio 2010 CodedUI Test Visual Studio 2010 Layer Diagram Visual Studio 2010 Sequence Diagram Visual Studio 2010 Directed Graph Visual Studio 2005+ Database Unit Test Visual Studio 2005+ Unit Test Visual Studio 2005+ Web Test Visual Studio 2005+ Load Test Sql Server Features Sql Server 2005 Stored Procedure Sql Server 2005 Xml type Sql Server 2005 Paging support

    Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >