Search Results

Search found 31421 results on 1257 pages for 'software performance'.

Page 936/1257 | < Previous Page | 932 933 934 935 936 937 938 939 940 941 942 943  | Next Page >

  • Full speed internal switch bandwidth but per-port set external bandwidth?

    - by garg
    I am in an environment where all the machines are behind a switch that I don't have access to. Each ethernet wall port has limited bandwidth depending on how much has been paid for each port. The problem is that some people have 10Mbps connections and some have 100Mbps connections and this causes problems with local intranet file transfers and operating system/software deployments. Operating systems can take hours to be deployed if the machine is on 10mbps. Do you know if it is possible with most switches to set a rule that would limit bandwidth coming in/going out to an extranet, but keep full bandwidth if the packets are destined to go to a local machine? For example, the internet might be limited to 10Mbps, but internal servers would get gigabit speeds? Thanks

    Read the article

  • Error with FTP since binding via httpcfg

    - by Linda
    I was in a similar posistion to this question and bound two IP addresses using httpcfg. Since doing this ftp does not seem to be working on IIS6 in Windows Server 2003. Any ideas what could be wrong? The command I ran was: httpcfg set iplisten -i xxx.xxx.x.x I get the following when I try to conenct via Filezilla: Error: Connection timed out Error: Failed to retrieve directory listing The log file is returning the following: #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2009-08-17 13:54:05 #Fields: date time c-ip cs-username cs-method cs-uri-stem sc-status sc-win32-status 2009-08-17 13:54:05 91.85.70.17 Client [1]USER Client 331 0 2009-08-17 13:54:05 91.85.70.17 Client [1]PASS - 230 0 In the ftp site settings I have the site pointing to the IP address used using httpcfg and the port set to 21. Update: I can see a directory listing if I connect via the inbuilt commandline ftp client in wondows vista. If I try to connect via a windows explorer I start in the incorrect folder and no files are listed just directories.

    Read the article

  • Recover from a recover partition when F11 doesn't work and windows is corrupt

    - by jherlitz
    I have someones presario V3000 laptop. It has a D drive which is the recovery partition. The user brought it to me and windows would no longer even boot up. I could only reload XP and try to find a way to recover from the recovery partition. However haven't been able to. I read, hold F11 down when booting up, but that didn't do anything, and the other item I read is to create the CDs from the software installed in the OS from the factory. Well that is the OS that went corrupt and is no longer there. A new reloaded version of XP is there now. Is there still a way I can either create recover CD's/DVD's or boot from the recovery partition?

    Read the article

  • Prevent Server Restart after Windows Updates

    - by eidylon
    we have a number of servers in our office, as a small hosting company, and these servers are critical to business, ... web server, mail server, db server, etc. On a semi-regular basis, when the machines get automatic updates, they just automagically reboot themselves in the middle of the night. A number of them have software which must be running on the console session (bad practice, I know, but out of my control). When they reboot themselves, these programs obviously shut down, leaving customers upset and services interrupted. How do you set a Windows Server 2003 R2 machine to NEVER automagically reboot itself after updates? And perhaps, if possible, to instead email someone so that they are aware it needs a pending reboot and can schedule it for the best time? Thanks in advance!

    Read the article

  • Is 12.10 ready from prime time?

    - by Mikey
    I recently installed 12.10 - dual boot using Wubi. I had numerous stability problems: many sporadic, unaccounted for system errors, software that was installed and then seemed to disappear from App Launcher, etc. Machine is new HP quad with 4 gig memory - wonderful piece of hardware - definitely no hardware problems there. I went back to 12.04 (installed from ISO image, not Wubi) and it's rock solid - never any issues at all. Is 12.10 not ready for prime time? Are there fixes-updates in the pipe? Should I get a DVD disc and install 12.10 from ISO instead of Wubi? New to Linux/Ubuntu after 20 years on MS/Windows and loving it - I develop in C++ and Python - maybe will try Lazarus since I know Delphi. Would like to use the latest and greatest Ubuntu but I will not sacrifice stabilty. Are there known problems with 12.10? Would using the standard install instead of Wubi help? Seems a lot of users are voting down this question - not sure why since other users have confirmed problems.

    Read the article

  • Door with keypad that can be controlled by website

    - by pbz
    Hi, I'm looking for some kind of the door/system that would allow us to install a door lock with a keypad. When somebody goes to that door they would enter a number that would open the door. The twist is that we need to be able to change the key combination that opens the door from a website. It needs to allow me to programmatically change the key combination required to open the door without somebody physically going there to do it. Any ideas what kind of hardware/software we would need to do this? Thanks a lot!

    Read the article

  • Installation of large programs in Mac OS X

    - by archagon
    A few newbie Mac OS X questions: Despite the fact that most applications can be installed by dragging them to the Applications directory, some software still requires the creation of a separate program folder. Where should I put this folder? Does it matter? Is the Applications directory special somehow, or is it just a convenient folder with a custom icon? If I move one of these program folders later on, will the program still work? Will shortcuts to files in the folder break? Is there something similar to a registry in Mac OS X?

    Read the article

  • remote desktop: the app on the remote machine is confusing the controller's hostname with its own hostname

    - by David Dai
    I have 2 machines A, B, both run Windows OS. A is my work machine, B is a server on which I have already installed SQLServer. Now I want to install another software on B which runs on top of the SQLServer. I remote connect to B from A. Then on the remote desktop, I start the installer, along the installation process, there's a step where I can configure which server to connect to. normally B's hostname is entered automatically to the hostname field. The issue I'm having is, when I get to that step, A's hostname is entered automatically instead of B's, and even if I manually correct it to 'localhost' or '127.0.0.1' or B's hostname, the installer still cannot connect to B's service as if it still try to connect to A. Theoretically, how does this happen? how is this possible?

    Read the article

  • Very large log files in IIS 7.x

    - by Neal
    Hello, I had a site stop working today and when I RDP'd into the server I saw a warning about low disk space. The first thing I checked was the inetpub folder where the log files are stored and sure enough it was huge, 40 GB huge. I do clean the files monthly but what is causing a day's worth of logging on a medium activity site (www.vbdotnetforums.com) to create 300-500 MB log files? I do have everything being logged so my SmarterStats software gives me the most info, but are there specific things I should/can turn off that is causing the most growth in these log files? Also, sure would be nice if Microsoft someday had some sort of log file management such as deleting log files after they exceed a certain size (total), X days, etc. We all have to come up with some solution to delete the old ones manually. Thanks Neal

    Read the article

  • Mac OS needs Windows Live Writer &ndash; badly!

    - by digitaldias
    I recently bought a new  Macbook Pro (the 13” one) to dive into a new world of programming challenges as well as to get a more powerful netbook than my Packard Bell Dot which I’ve been using since last year. I’ve had immense pleasure using the netbook format and their small size in meetings (taking notes with XMind), surfing “anywhere”, and, of course blogging with windows live writer. So far the Mac is holding up, it’s sleek, responsive, and I’ve even begun looking at coding in Objective C with it, but in one arena, it is severely lacking: Blogging software. There is nothing that even comes close to Live Writer for getting your blog posts out. The few blogger applications that do exist on mac both look and feel medieval in comparison, AND some even cost money! It looks like some mac users actually install a virtual machine on their mac to run Windows XP just so they can use WLW. I’m not that extreme; instead, I’m hoping that the WLW team will write it’s awesome application as a Silverlight 4 app. That way, it would run on Mac and Windows (as a desktop app). I wonder if it will ever happen though…   PS: The image is of me, took it with the built-in camera on the mac and emailed it to the windows PC that I am writing on :)

    Read the article

  • Help me select a "Simpler" target to create a new language: .NET, LLVM, Go, Own VM

    - by mamcx
    Lets define "Simple". This is my first language. I have no previous experience I will not dedicate +4 years to learn it properly. I'm a professional software [developer], but as an amateur in this area, I want instant gratification. If the idea shows a future, I could rewrite it. I don't want to do everything from scratch. In fact, if there exists a way to get GO (for example), change its syntax, add some sugar, give some extra functions and leave intact everything else, that would be perfect! From the example of coffescript/scala I think is better to build on top of some rich runtime like .NET/GO so I don't need to rewrite everything. HOWEVER, if is better other way, no problem for the first try! I want it in a week. I need it in a week so it will really take a month. Then it truly takes 3 months. But I don't want to put more that 3 months on this. I could reduce the scope of my language, but I hope the tools will help me a lot... I want to build a new language. Similar to python, but typed. I wonder what to build it on top of. I like the idea of building on top of GO. To get their sane (IMHO) OO paradigm (I plan to do the same, using interfaces, not inheritance), get goroutines and some other stuff. In my naive thinking I imagine that spit another language could help me to debug it more easily. However, look like everyone is building on top of something like .NET (don't like Java), LLVM or make it own VM. I read http://createyourproglang.com/ (great!) and the part of the VM look "easy" to me. So, what I need is the proper criteria and question I need to know in advance to have a fair shot at make this.

    Read the article

  • "Failed to create swap space" error during installation

    - by Welsh Heron
    I've been trying to install Ubuntu for the past two days or so, but I've been running into a problem: every time I run the installation program on the LiveCD, I always get the same (or a very similar) error: "Failed to create Swap space The creation of swap space in partition #3 of SCSI5 (0,0,0)(sda) failed." So far, I've run DBAN (Darik's Boot and Nuke) on my HDD once, to make absolutely sure that everything on it had been erased. Then, I simply put in the LiveCD, and let it run the automated install. I get the above error directly after I tell it to automatically partition the HDD (it will work for a second or so, then this will pop up), forcing me back to the screen that lets me choose whether I want to automatically or manually partition the HDD. Well, after failing to install the software manually, I did a little research and learned enough about partitioning Linux to use the 'Manual partitioning' option. I partitioned the HDD as follows (it's a 1TB drive): /home - (the rest)- ext2, / - 20GB - ext2, /boot - 100MB - ext2, /swap - 8GB /EFIboot - 40MB The only difference when I tried this method was that I got THIS message: "Failed to create Swap space The creation of swap space in partition #2 of SCSI5 (0,0,0)(sda) failed." Basically, the only difference was that there was now a '2' instead of a '3'. If I may ask, what exactly am I doing wrong? I've tried looking around the internet (that's basically all I've done for the last two days), but no one seems to have the same problem that I have, and I've tried most of the solutions for similar problems (DBAN, formatting partitions in ext2 format, etc). The only thing I haven't tried is using the terminal to manually partition the HDD...and I actually DID try to do this, but I wasn't able to get past 'su' 's password demand, so I wasn't able to use the terminal. Thank you for your help in advance. ~Welsh

    Read the article

  • IBM Bladecentre H Bootup Sequence Control

    - by Spence
    I have a bladecentre with blades, network and a SAN in a single rack. What I'd like to do is control the startup of the bladecentre so that when the rack is powered on that the blades will delay their bootup until the SAN is powered on correctly. Is this even possible? We have an AMM in the chassis if that helps. Basically we are looking into the reboot that occurs after power is restored to a UPS. I sincerely apologise for the noobness of this question, but I am a software guy trying to help :)

    Read the article

  • What files should be excluded from a complete Windows backup?

    - by tro
    I'm starting to use CrashPlan to backup my Win 7 PC. I've got it writing to my external HD (for quick local restores) and to CrashPlan Central (for offsite storage). I'd like to backup my entire C:\ drive (the only partition) in a way that: Preserves all of my installed software and configuration, but Avoids backing up log files and other ephemeral / temporary files that are regenerated during normal operation of the OS. Which files and/or directories should I be excluding from backups? I'd like to make this a community wiki, so that we could all contribute towards a definitive list. Here's a list of regular expressions identifying the directories and files that CrashPlan excludes on Windows by default listed at http://support.crashplan.com/doku.php/articles/admin_excludes: .*/(?:42|\d{8,})/(?:cp|~).* (?i).*/CrashPlan.*/(?:cache|log|conf|manifest|upgrade)/.* .*\.part .*/iPhoto Library/iPod Photo Cache/.* .*\.cprestoretmp.* *\.rbf :/Config\\.Msi.* .*/Google/Chrome/.*cache.* .*/Mozilla/Firefox/.*cache.* .*\$RECYCLE\.BIN/.* .*/System Volume Information/.* .*/RECYCLER/.* .*/I386.* .*/pagefile.sys .*/MSOCache.* .*UsrClass\.dat\.LOG .*UsrClass\.dat .*/Temporary Internet Files/.* (?i).*/ntuser.dat.* .*/Local Settings/Temp.* .*/AppData/Local/Temp.* .*/AppData/Temp.* .*/Windows/Temp.* (?i).*/Microsoft.*/Windows/.*\.log .*/Microsoft.*/Windows/Cookies.* .*/Microsoft.*/RecoveryStore.* (?i).:/Config\\.Msi.* (?i).*\\.rbf .*/Windows/Installer.* Other excludes: .*\.(class|obj) .*/hiberfil.sys (?i).*\.tmp (?i).*/temp/ (?i).*/tmp/ .*Thumbs\.db .*/Local Settings/History/ .*/NetHood/ .*/PrintHood/ .*/Cookies/ .*/Recent/ .*/SendTo/

    Read the article

  • How to fix sound in wolfenstein Enemy Territory

    - by GrizzLy
    I installed wolf:et, and i cant get sound to work. Everything that i have installed is in default paths, i had 10.4 and then upgraded to 10.10 via software update gui. I had sound working in 10.04 with method under 2. I have tried following killall esd; et; esd with that i get ------- sound initialization ------- /dev/adsp: No such file or directory Could not open /dev/adsp ------------------------------------ sudo -i echo "et.x86 0 0 direct" /proc/asound/card0/pcm0p/oss echo "et.x86 0 0 disable" /proc/asound/card0/pcm0c/oss exit with that i get bash: /proc/asound/card0/pcm0p/oss: No such file or directory and indeed i do not have that, i have only sub0 and sub1 in pcm0p I have tried running et with et-sdl-sound script, but with that i get this output in console http://pastebin.com/J7gRU1uh I have probably messed up sdl libraries, could not get sound to work, so downloaded new from debian package site and installed them. Tried setting SDL_AUDIODRIVER="pulse" in et-sdl-sound, looks like i am getting same error as in method 3. pasuspender -- et +set s_alsa_pcm plughw:0 gives me ------- sound initialization ------- /dev/adsp: No such file or directory Could not open /dev/adsp _------------------------------------ Misc: @Oli: i do not know if i am running pulse or esd, how can i check that?

    Read the article

  • Need database selection advise

    - by jacknad
    I know this is considered a bad question since there is no correct answer, but I need to decide on a database for embedded linux (DaVinci 368 based) hardware and I've never had to produce a design with a database before. Each record will probably contain less than 1000 images with associated alpha-numeric data and the mass storage will be some kind of flash drive. Only one user needs access to the data at a time. MySQL claims to be "The world's most popular open source database" but SQLite claims to be "the most widely deployed SQL database engine in the world." Perhaps there is another that is also the best in the world? Which is easiest to use for a database newbie? Should I just flip a coin? Does it really matter which one I pick? Do I even need to use a database software package or should I roll my own? I won't need bells and whistles like sorting, but I'll probably need to delete the oldest records to make room for new ones if the storage fills up.

    Read the article

  • Any good PostgreSQL client for linux?

    - by senotrusov
    stackoverflow points me "belongs-on-serverfault" on this, so crossposting. I am frustrated of not having a good Linux GUI administration and development tool for PostgreSQL. pgAdmin III is buggy and unusable piece of... hmm, software, compared to Windows-only PostgreSQL Maestro and EMS PostgreSQL manager. phpPgaAmin does not looks promising. EMS PostgreSQL manager can work under Wine, but such setup have a number of issues. Requirements are: Table data editing and browsing for large tables (1M+), able to jump by FK or some master-slave editing, GUI filtering and so on. ER diagrams with in-place schema editing Schema editing and browsing with all useful GUI support Schema changes log to put into DB versioning (migrations script). Tabbed interface to be able to work with a number of tables and SQL queries at once. And so on. Any ideas?

    Read the article

  • can anyone help me through the preparation of Eclipse IDE for android developer in ubuntu 12.04?

    - by csbl
    I'm new to to Linux, in this particular case, to Ubuntu. I have a small android project I have to finnish until this Friday and I'm still stuck with the install and preparing of the development envrironment. The only thing I did was install the Eclipse IDE. I'm still missing the SDK, JAVA and anything else that might be needed. Can someone help me through this? It's only because I'm running out of time to develop, or else I would embarc on a deeper investigation of this OS. I tried the step to install android platforms, through Eclispe-Help-Install New Software, and I got the follwoing error messages, at the end of the process: [2012-06-06 17:35:56 - adb] /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] 'adb version' failed! /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] 'adb version' failed! /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory Can anyone help, please??

    Read the article

  • Podcast Show Notes: Public, Private, and Hybrid Clouds

    - by Bob Rhubart
    This week the OTN ArchBeat Podcast begins a four-part series featuring a panel of some of Oracle's top cloud experts in a conversation about the similarities and differences between, public, private, and hybrid clouds. The Panelists Dr. James Baty Vice President of Oracle’s Global Enterprise Architecture Program, and a frequent speaker at OTN Architect Days and other events. Mark T. Nelson Lead architect for Oracle Cloud and is responsible for designing the infrastructure for Oracle's public Software as a Service, and Platform as a Service offerings. Ajay Srivastava Vice President of Oracle’s On Demand Platform. William Vambenepe Architect for Oracle’s Middleware/Applications Management and Cloud Computing. The Conversation Listen to Part 1: The panel offers an overview of the various flavors of cloud computing. Listen to Part 2 (June 13): Cows in the cloud and the importance of standards. Listen to Part 3 (June 20): Why cloud computing is a paradigm shift -- and why it isn’t. Listen to Part 4 (June 27): Advice on what architects need to know to take advantage of the cloud. Coming Soon Highlights from the Roundtable Discussion at OTN Architect Day in Reston, VA. An expert panel discusses the role of the Cloud Architect. Stay tuned: RSS

    Read the article

  • Is there a rule of thumb for RAM upgrades?

    - by Retrosaur
    I'm having a hard time figuring out whether or not a certain laptop/computer's RAM can be upgraded or not. Is there a rule of thumb that determines how much max RAM one could add to a system without looking it up via external websites? A little bit of a background information: I work in computer sales at a computer electronics store, so it is virtually impossible for me to install any sort of software that would detect computer specs, and I get a lot of customers who wonder what laptop/desktop RAM upgrades usually are. Is there a certain rule that adding more RAM entails? Does it make a difference if it's a 32-bit or 64-bit machine? OS?

    Read the article

  • What are the risks of installing a "bad quality" package?

    - by ændrük
    When I try to install sonic-visualiser_1.9cc-1_amd64.deb via the Software Center the following warning message is displayed: The package is of bad quality The installation of a package which violates the quality standards isn't allowed. This could cause serious problems on your computer. Please contact the person or organisation who provided this package file and include the details beneath. Lintian check results for /home/ak/Downloads/sonic-visualiser_1.9cc-1_amd64.deb: Use of uninitialized value $ENV{"HOME"} in concatenation (.) or string at /usr/bin/lintian line 108. E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/bin/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/bin/sonic-visualiser 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/applications/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/applications/sonic-visualiser.desktop 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/doc/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/doc/sonic-visualiser/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/doc/sonic-visualiser/CHANGELOG 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/doc/sonic-visualiser/COPYING 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/doc/sonic-visualiser/README 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/mimelnk/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/mimelnk/application/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/mimelnk/application/x-sonicvisualiser-layer.desktop 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/mimelnk/application/x-sonicvisualiser.desktop 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/pixmaps/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/pixmaps/sv-icon-light.svg 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/pixmaps/sv-icon.svg 1000/1000 I understand that this means the package doesn't meet Debian policy and I know how to override the warning and install the package anyway. What are the risks of doing so?

    Read the article

  • Ubuntu 13.10 installed and worked, but now not working

    - by San
    I have a HP G7000 laptop. I updated/upgraded from 13.04 to 13.10, after the software updater recommended I upgrade. I have duel booting system with Windows Vista. The system was working for the past two days, but I start getting the errors below, after selecting Ubuntu in Grub Menu on startup and at the splash screen it says "Press S to Skip or M for manual configuration" Pressing S gives a black screen and m takes you the errors below. Windows boots and works fine after selection in the Grub Menu. [ 15.235703] EXT3-fs (sda5): error: unrecognized mount option "discard" or missing value. [ 16.788072] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode flags [expected 2, found 0] [ 20.860071] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode flags [expected 2, found 0] [ 20.980076] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode flags [expected 2, found 0] Root filesystem Check failed root@simamhar:~# Tried boot-repair using the LiveCD method, no luck. System still gives above error. (you can view the boot-repair log here http://paste.ubuntu.com/6287287) When I use the liveCD for 13.04 or 13.10 however, my hard disk is recognized and I can read the files. Why is it that the installation on the hard disk has stopped working and does not recognize my / ? What do the above errors mean and how can i solve them? There was no power failure before, during or after the update/upgrade process from 13.04 to 13.10. I now would like to go back to 13.04 without reinstalling afresh? Any help will be appreciated. Thanks.

    Read the article

  • Swap, Swapiness and Standby: swapping starts when waking up

    - by mdo
    I'm running running Ubuntu 12.04 on a Lenovo W500 (Core2Duo T9400, 4GB Ram) Current kernel: 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux -- but the problems exists since a couple of months, surviving quite a few software (includig kernel) updates I regularly put my machine into suspend-to-ram (S3) and when the machine comes back up Ubuntu starts to swap out processes. I was able to observe that the used swap-space starts to grow right after the box returns. See munin graphs below, the gap (obviously) shows the timeframe in STR. Needless to say that the box becomes unusable while swapping, load goes up beyond 10. What I've done so far: lowered swappiness from default (60) to 10 (via /etc/sysctl.conf: vm.swappiness=10) -- this has improved the situation much, but sometimes the problem comes back, I have not found a trigger (like memory usage) for this for now lowered swappiness to 5 -- perhaps this has brought an improvement again Before going to STR the box ran stable without (swapping) problems for hours. Today when the issue showed up again I used this script (- http://stackoverflow.com/questions/479953/how-to-find-out-which-processes-are-swapping-in-linux) to find what processes have the most used swap space. The result after the swap orgy is like that (all PIDs with more than 10M usage): Overall swap used: 2121344 kB ======================================== kB pid name ======================================== 439520 17491 java 208148 22719 firefox 136640 4337 /usr/bin/quodli 120852 5271 chrome 81832 5264 chrome 74284 17003 chrome 65368 16960 chrome 57088 3675 chrome 56184 30923 chrome 54412 11331 chrome 54264 3878 chrome 51508 18382 chrome 50088 3163 zeitgeist-fts 49772 15543 chrome 41344 15355 compiz 35040 1161 mysqld 32124 18374 chrome 30940 11339 chrome 30044 5752 chrome 28780 4235 plugin-containe 24576 31246 empathy-chat 23840 17703 chrome 22512 3207 ubuntuone-syncd 21588 1937 ntop 18336 2021 asterisk 17200 3915 chrome 13964 1935 Xorg 12036 10679 chrome 11104 30782 empathy 11056 2889 python 10932 16565 knotify4 The java instance at the top is IntelliJ. IntelliJ, Firefox and Chrome also were all used right before the box was put to STR. So my question is: can I somehow prevent these swapouts AND why do they happen? Is it perhaps related to some misidentification of idle processes? I'm not looking for resolutions like: turn off swap buy more RAM Thanks in advance!

    Read the article

  • Announcing the New Virtual Briefing Center

    - by Theresa Hickman
    Do you want to hear about real-world customer success stories? Or listen to Oracle Application leaders discuss the value in the latest releases of Oracle Application products? Do you want one place to download up-to-date content, including white papers, podcasts, webcasts and presentations? Did you miss the Virtual Trade Show at the beginning of 2011? If you answered yes to any of these questions, then the Virtual Briefing Center is the place to get up-to-date Oracle product information for Oracle E-Business Suite, PeopleSoft, JD Edwards, Fusion, Siebel and Hyperion across multiple product areas from financials, procurement, supply chain, CRM, Performance Management, and more. Every month we will have "Monthly Spotlights" to showcase new content. The following lists the upcoming live webcasts in July 2011: Weds. July 6, 2011 at 9:00 a.m. PST/12:00 p.m. EST: Hear about Amway’s upgrade to Oracle E-Business Suite 12.1 and how they stabilized financial modules, especially the month-end close processes. Thurs. July 14, 2011 at 9:00 a.m. PST/12:00 p.m. EST: Hear West Corporation share their PeopleSoft 9.1 upgrade, resulting in improved self-service, more robust reporting capabilities and new workflow and processes. Thurs. July 21, 2011 at 9:00 a.m. PST/12:00 p.m. EST: Learn how MFlex improved their operations, saved manpower and reduced time to close with their upgrade to JD Edwards EnterpriseOne 9.0. Thurs. July 28, 2011 at 9:00 a.m. PST/12:00 p.m. EST: IEEE discusses their upgrade to Siebel 8.1 using open web service architecture for faster SOA enablement allowing them to scale their membership capacity by 250%. If you cannot attend any of the above live events, that's OK because each of the webcasts in this series will be recorded and available on demand. And for you Financials folks who may have missed the webcasts from the Virtual Trade Show earlier this year, you can view them on demand by Visiting the Resource Library: Planning Your Successful Upgrade to Oracle E-Business Suite Financials 12.1. In this session, Bryant and Stratton College talk about their upgrade. Planning Your Successful Upgrade to PeopleSoft Financials 9.1. In this session, the University of Central Florida share their upgrade story. Fusion Financials: The New Standard for Finance. In this session, Terrance Wampler, the VP of Financial Application Strategy discusses the business value of Oracle's next generation financial applications and how customers can take advantage of Fusion Financials alongside their existing investments. What are you waiting for? Register now!

    Read the article

  • Ubuntu 13.10 AMD/ATI proprietary driver slow boot time, black screen after logging in and lengthy login/logout delays

    - by NahsiN
    Ubuntu 13.10 is causing me major headaches with my AMD/ATI HD 5770 GPU. Below is a list of problems I am currently encountering. 1) The boot time is extended by at least 25s after installing catalyst 13.4. Using open source radeon drivers, my boot time till the login screen is ~10s. With catalyst 13.4 installed, the boot time increases to ~35s. This was not the case in Ubuntu 13.04, 12.10 or 12.04. I have done the driver installation manually (instructions from wiki.cchtml.com) and using software center and there is no difference. I have not tried the catalyst 13.8 beta driver. 2) After manual installation of catalyst 13.4, I get stuck at a black screen after logging in. I have to purge fglrx to resolve the problem. I tried sudo amdconfig --initial -f but it didn't help. 3) The delay between logging in and unity being displayed is ~10-15s for BOTH open source and proprietary drivers. During the delay, it's just a black screen. Whenever I logout, there is again a ~10-15s delay with the login screen appearing stuck before lightdm allows me to enter my password again. This is ridiculous! Yes, I could stick with open source radeon drivers but I would like to install Steam and play my Valve collection on the machine. Is anybody else encountering similar issues?

    Read the article

< Previous Page | 932 933 934 935 936 937 938 939 940 941 942 943  | Next Page >