Search Results

Search found 19557 results on 783 pages for 'networking programming'.

Page 94/783 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

  • Having trouble installing Bradcom STA driver

    - by user192881
    I just installed Ubuntu and love it so much, its so fast now. But I have a problem connecting to the internet. I checked and saw I have to install the driver Broadcom STA wireless driver but every time I do try to install it it says: Sorry, installation of this driver failed. Please have a look at the log files for details: /var/log/jockey.log I went to the terminal and copy and pasted the log file name. and when I did it, it said I have no permission to access this file. I checked on the forums that I have to be on a wired connection. So I plugged my laptop into my router and I got internet then tried to install the driver again. And it was loading then when it got to the end the same message popped up. Also I have one of those little USB router things you plug into the computer and it gives you internet I have been using that but its to slow. So I want to use the one in my computer but cant. Also I tried the command: sudo modprobe wl and when i type that command in it says: FATAL: Module wl not found Also I'm using Ubuntu 12.04

    Read the article

  • how to get wireless to work on my HP Compaq nx6325 Notebook on 12.04

    - by user211487
    When my laptop ran XP, the wireless worked perfectly. Now the only way I get internet is having it wired in my living room - which is MASSIVELY inconvenient for me seeing as my room is outside. I have downloaded the driver from 'Additional Drivers', reset my computer (with difficulty, it also doesn't seem to like turning off, so I have to 'kill' it) and still nothing! I have looked all over the internet trying to find solutions but I just cant seem to get it to work. I have a USB wireless stick but I can't load the driver from the CD. I got this comment on a previous question: "Using either Snaptic Package Manager or Ubuntu's own Software Centre, remove "bcmwl-kernel-source" if it's already installed. Next, search for "firmware-b43-installer” and “b43-fwcutter” and install both. Finally, running Software Sources and checking the Additional Drivers tab you should find Broadcom STA Wireless Driver that you can select, install and on reboot hopefully have wireless working ok..." Which I replied: "Right, so I tried to find/remove "bcmwl-kernel-source" but couldn't find anything. I managed to install both "firmware-b43-installer” and “b43-fwcutter” using terminal, after finding out how it worked. And lastly, I couldn't figure out how to find 'Broadcom STA Wireless Driver' - still no more additional drivers. And my wireless is still not working. My laptop has a button that turns wifi on and off and since I put Ubuntu on it, it hasn't worked. And also, my computer still doesn't seem to restart properly - it just gets stuck on the ubuntu loading screen." - hope that helps, somewhat I am VERY new to Linux, not very technical and in need of help! -Running Ubuntu 12.04 32bit on a HP Compaq nx6325 Notebook Thank you to anyone who replies, its much appreciated

    Read the article

  • My hardware MAC address is always 00:00:00:00:00:00 until I manually update 'eth0'. How can I fix this?

    - by user57184
    I am using Ubuntu 12.04. I use a wired connection. My network MAC address shows as 00:00:00:00:00:00. When I enter the commands below into a terminal window, it starts working again. sudo ifconfig eth0 down sudo ifconfig eth0 hw ether my mac address sudo ifconfig eth0 up I have to enter these commands every time I want to use the Internet. How can I fix this? Update copied from comment The contents of my /etc/NetworkManager/NetworkManager.conf file is: [main] plugins=ifupdown,keyfile dns=dnsmasq no-auto-default=00:00:00:00:00:00, [ifupdown] managed=false

    Read the article

  • how to congest a link using iperf

    - by navaz
    I have setup like below. Switch1-------------------- Switch2 | | | | | | | | | | | | PC1 PC2 PC3 PC4 I have a video traffic is flowing between PC1 and PC4. I have configured PC2 as iperf server. ( iperf -s ) and PC3 as client . (iperf -c 10.10.10.2 -P 20 -t 10000) where 10.10.10.2 is PC2 IP. now I am seeing most of the traffic in a link (switch1---switch2) is iperf. (TCP). I have observed from the logs that 1 out of 300 packet is UDP. Still I am not seeing any difference in the quality of video streaming in PC4. It looks similar compared to the case with no iperf. I am checking QOS, I have tried many options with iperf, couldnt succeed. I want to diminish the quality of video streaming in PC4. Could you please tell me what options can be used along with iperf to do it. Bandwidth between Switch1---switch2 is 1Gbits/sec. Thanks in advance

    Read the article

  • lshw not showing network

    - by triunenature
    Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

    Read the article

  • Programming MVC2 is out with code

    The sample code for my latest book Programming ASP.NET MVC (covers version 2 and 2010) is available via the book's catalog page at Microsoft Press site run by O'Reilly.  You click the Examples link here to get to it: http://oreilly.com/catalog/9780735627147/...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • eth0 not working on startup

    - by user4106
    Hi to all, This might sound strange but, working with my Lubuntu 10.04 i've experienced troubles when connecting to my eth0 newtwork. After some googling, i've found out that by writting in the CLI the following command: mii-tool eth0 -F 10baseT-FD and activating the eth0 in the toolbar (by clicking "activate eth0") everything works just fine. Well, up to now, i did not have any problem, because every time i turned on the computer i had to do this, but it was very little effort.But now, i would like to use the machine as a file server, accesing it by ssh, without monitor or keyboard. So, i won't be able to make this actions, and can't do this at startup because mii-tool needs root permissions. So, the question is: Do you know what does that command do, and how can id make that change permanent? Or do you know any other solution for my problem? I hope i was clear! If not, tell me and i'll try to be as clearer as possible. Thanks in advance!

    Read the article

  • How to write the path to a Windows shared folders address in terminal?

    - by user206996
    I want to permanently mount a few Windows shared folders. I googled that topic and found a lot of good answers, but with all the solutions I have a little problem: I believe I can't properly give an address of shared folder. I can find it following way: "Network" - "Windows Network" - "WORKGROUP_name" - "Computer_name" - and there is some folder i would like to mount. How can I write the path to the folders in terminal? UPD i can access needed folder throw address in location bar smb://server/ro/, but i try mount it by editing /etc/fstab file (using guide https://wiki.ubuntu.com/MountWindowsSharesPermanently) i get error mount error: could not resolve address for server: Unknown error PS in /etc/fstab : //SERVER/RO /media/server cifs username=user,password=pwd, uid=1000,iocharset=utf8 0 0

    Read the article

  • What are the difference between: agent, actor, dataflow based programming?

    - by inf3rno
    What are the difference between the following terms? agent-based programming agent-based programming with microagents actor-based programming actor-based programming with lightweight actors dataflow based programming It is hard to find comparing articles and they are very similar. Afaik they have different constraints and they are implemented on a different abstraction level, but I need some reassurance...

    Read the article

  • How to join a Windows Domain an Map NEtwork Drives on Ubuntu Partition

    - by AgainstClint
    I just installed the current build for Ubuntu on a partition for my work computer. I am a novice when it comes to Linux/Ubuntu, which is why I installed it along side windows. I want to learn how to operate and use Ubuntu much more than I do now, so I figured installing it and trying to do day to day functions here would be a "Thrown into the pool with sharks" way to do it, and I like that way. I did however have a few questions: We are on a Domain in Windows, is there any way to join that domain using the Ubuntu partition? We Also have 16 mapped network drives. I don't actually need ALL of them mapped for Ubuntu, but is there a way to Map at least one of them to see/use here in Ubuntu. Outlook Corporate email, how can I sign in/use it while...well, you get the idea. As I said earlier, I am VERY new to Ubuntu, i've only played around with it a bit at home and never at the office. If you could simplify it down for me a bit, that would be great.

    Read the article

  • A tinkered PC resets its nameserver (resolv.conf) on each boot

    - by aitchnyu
    The Ubuntu 11.10 PC resets resolv.conf on each boot, only with a comment remaining. How do I fix this by setting the persistent storage? It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. Content of interfaces file: root@technovia-3:~/dev/spectrum/spectrum# cat /etc/network/interfaces auto lo iface lo inet loopback

    Read the article

  • How to run just one application over ethernet while others on wifi

    - by db42
    I normally connect my laptop via wifi. However, I would like to use synergy to share my workplace desktop machine with my laptop. But the problem is that my desktop machine doesn't have wireless support. So, I have no other options except using ethernet to connect them. My first question is - Is it possible to use ethernet for synergy and keep using wifi for all other application. If the answer is yes, can somebody please guide me how to achieve this. Thanks,

    Read the article

  • Wired connection not being recognized

    - by maxifick
    I'm on Ubuntu Maverick (10.10). I've read a few threads regarding wired connection problems, but haven't found a solution yet. The problem appears after I connect to a wireless network. When I disconnect wireless and plug in an internet cable, the wired connection is not recognized at all. Even the socket appears dead (there are no diodes flashing). The only solution so far seems to be restarting the computer. Network Manager then tries to connect to a Wi-Fi, but the wired connection is listed and working. I've tried sudo restart network-manager, but that doesn't solve anything. After a while, available wireless networks start appearing, but the wired still doesn't. Any ideas? Thanks in advance. Edit: Here is the dmesg output after switching off Wi-Fi and then plugging the internet cable. [18200.623543] Restarting tasks ... done. [18200.648422] video LNXVIDEO:00: Restoring backlight state [18200.707580] sky2 0000:02:00.0: eth0: phy I/O error [18200.707715] sky2 0000:02:00.0: eth0: phy I/O error [18200.707819] sky2 0000:02:00.0: eth0: phy I/O error [18200.707922] sky2 0000:02:00.0: eth0: phy I/O error [18200.708025] sky2 0000:02:00.0: eth0: phy I/O error [18200.708127] sky2 0000:02:00.0: eth0: phy I/O error [18200.708229] sky2 0000:02:00.0: eth0: phy I/O error [18200.708332] sky2 0000:02:00.0: eth0: phy I/O error [18200.708824] sky2 0000:02:00.0: eth0: enabling interface [18200.709587] ADDRCONF(NETDEV_UP): eth0: link is not ready [18202.662422] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18203.324061] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18211.193137] eth1: no IPv6 routers present [18212.844649] usb 5-1: new low speed USB device using ohci_hcd and address 5 [18213.017235] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input16 [18213.017499] generic-usb 0003:0461:4D17.0004: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0 After system restart, dmesg says this: [ 19.802126] sky2 0000:02:00.0: eth0: enabling interface [ 19.802394] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.812533] device eth0 entered promiscuous mode [ 21.495547] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.495677] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.496574] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

    Read the article

  • Backup networks

    - by MegaBrutal
    My USB Wi-Fi adapter tends to overheat and when it happens, it stops working until I pull it out and plug it in again. Since I often access my machine remotely from other places, when it happens, my machine gets inaccessible for me until I get home to fix it. I'm thinking, I have another USB Wi-Fi adapter in spare. Would it be possible to plug it in that too but tell Ubuntu to only use it when the primary Wi-Fi adapter becomes off-line? (I won't use the other Wi-Fi adapter as primary because it provides significantly less quality.)

    Read the article

  • WiFi, No ping, other works fine

    - by Linux Mom
    I installed Ubuntu 12.04 LTS for my mom, this runs OK. However recently, I switched back and forth between encryptions on our WiFi Router from WPA-PSK to WEP and back again to WPA-PSK, same password. Now this old laptop won't even ping the gateway on the router, although the nm-applet shows connected. I tried re-adding the network and putting in the BSSID. I did this over again sometimes just to verify. I tried with my 3G Tethering on my phone, it works fine, can go online too. My other Linux laptop can go on the same wifi as well as my phone. And this laptop used to been online on the same network, same password, same encryption (WPA-PSK) What can be wrong ? Does it need a serious kick in the butt or removing some cached authorisation somewhere?

    Read the article

  • Connected to Access Point but no internet connection?

    - by ReaZem
    I am trying to use my school's WPA Enterprise network to access the internet with my Three-OS laptop. I currently have Windows7, Ubuntu11.10 and Backtrack5 installed. I can use my home's WPA2 network without any issues with the 3 OS. I can successfully connect to my school's network with the 3 OS but I can only browse the internet with windows7. Ubuntu network-manager and Backtrack WICD both say that I am connected to the Acces Point but I cannot browse the internet. I have tried uninstalling network-manager and installing WICD but it did not solve the problem. Every time I connect to the Access Point, I am able to browse the internet for about 10 seconds. I have tried disabling IPV6 I have tried changing DNS.

    Read the article

  • Wireless network disabled

    - by neil delmonte
    After installing Ubuntu 11.04, my network has become disabled. Here is the output oflshw in terminal: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 00:21:00:58:65:5f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:d4600000-d4603fff

    Read the article

  • Internet (HTTP) is not working on Sony Viao

    - by vijay
    I switched my sony viao laptop from XP to ubuntu 10.04 recently. I have it connected through router at home. The internet was working fine with XP. With ubuntu, i am not able to connect to interenet. I am able to update using apt, and i am able to ping too. It seems like there is a DNS issue, when i try to goto sites from firefox, it doesn't work. I tried disabling the ipv6 in firefox config, it doesn't work. My router is on 192.168.2.1 instead of 192.168.1.1 any ideas on what config i might need to change to make this work? or could this be a drive issue?

    Read the article

  • How to make my proxy settings change depending on the network I connect to?

    - by Little Jawa
    My company's corporate network requires me to set a network proxy to access the net, but when I am anywhere else, I don't need it. The proxy settings in Ubuntu (System - Preferences - Proxy server) allowed me to create "locations" that I can manually select. Then I have a "default" location (with no proxy) and a "work" location (with my company's proxy in it). Is there a way to make Ubuntu automatically select the "work" location based on the connection I'm using? I thought I could use the IP subnet (very specific) to detect where I am, but I have no idea how to set it up... Edit: I really need to have the proxy settings set at the system level. All my network connections (IMAP, SMTP, chat, etc) need to go through the proxy. Not only the web browser.

    Read the article

  • Common Network Administrator Tools

    - by No Time
    I would like to make a custom clump of Network Admin packages, to be able to carry on a thumb drive, to administer Debian based machines. Examples of what I would include so far: nmap traceroute vnstat zenmap * I know every situation may be different, but I would like to build a toolbox I could bring everywhere, and am looking for advice on other tools which would work. (If there is a similar question, I am fine being directed there)

    Read the article

  • Why does Ubuntu really slow down the rest of my home network?

    - by tympaniplayer
    I have a ubuntu Dekstop and a Windows 7 Desktop. The windows 7 is connected via wireless adapter and the ubuntu dekstop is connected via ethernet. The wireless adapter is capable of 300Mbps link speed. When my ubuntu is connected to the interet, the network becomes very very slow. I have a 15 Mbps cable broadband connection. I have had many devices connected at one with no problem, yet this one connection seems to be wreaking havoc.

    Read the article

  • Why is user "lightdm" trying to log into my SBS 2003?

    - by user652740
    I have 7 Ubuntu desktops connected to a SBS 2003 using Centrify. I have a rather weird scenario, whereby a user with the name lightdm is trying to log into our server, possibly automatically. I thought lightdm was the session manager, not a user? Does anybody know what could be causing this? There is no user: "lightdm" on the server and the problem only comes from one of the 7 internal desktops connected to the server (its IP address is in the local network).

    Read the article

  • How to join a Windows Domain and Map Network Drives?

    - by AgainstClint
    I just installed the current build for Ubuntu on a partition for my work computer. I am a novice when it comes to Linux/Ubuntu, which is why I installed it along side windows. I want to learn how to operate and use Ubuntu much more than I do now, so I figured installing it and trying to do day to day functions here would be a "Thrown into the pool with sharks" way to do it, and I like that way. I did however have a few questions: We are on a Domain in Windows, is there any way to join that domain using the Ubuntu partition? We Also have 16 mapped network drives. I don't actually need ALL of them mapped for Ubuntu, but is there a way to Map at least one of them to see/use here in Ubuntu. Outlook Corporate email, how can I sign in/use it while...well, you get the idea. As I said earlier, I am VERY new to Ubuntu, i've only played around with it a bit at home and never at the office. If you could simplify it down for me a bit, that would be great.

    Read the article

  • Getting my younger brother started on programming

    - by SmartLemon
    My younger brother is 13 years old, I started programming when I started to develop Android applications when I was 15, last year my brother gained an interest in it and he would always pestering me about letting him make something himself, so I wrote him a few tutorials and he built himself a small application that had a few buttons that did something, I think you put in your dob and it would tell you what day you were born on, he took a couple of days building up to his final application, maybe even a week, learning everything he needed. Since then he hasn't really done much more because I have been engulfed in work and such where I have my own programming problems to sort out. I told him that when he was my age (I am 17) that he should be better then me, he was a bit sceptical about this however. I dont think he has as much logical reasoning as I would think he needs to solve more complex problems, but shouldnt that just develop over time as it did with me? He has been pestering me for the past week or something to write him more tutorials, but I didn't have time. All I had with me was a playlist I had downloaded from the new boston from youtube for C++, it's about 73 videos. He is currently about 20-30 videos in, he has come to ask me a few questions about it and thats it. Should I have really properly started him with C++? Should I stop him now and start him again on python or ruby? I know that C++ shouldn't really be a beginners language, especially for someone who is only 13, by the time this question is answered will probably be up to learning about inheritance or something. Some people may see this as not a real question, but it is, and should be used as a reference for others. I want to know, should I start him on a different language whch is more easy? What language then? And would it be better for me to teach him myself (I would make time) or just continue him with the new boston? There are a few more questions throughout this question but these are the main ones. Part of the question people seem to be neglecting is me asking whether I should change what language he is learning to another, or since he is already pretty far through the tutorials should I just leave him with C++ and he can learn the other languages freely by himself?

    Read the article

  • Connect to wifi ubuntu 14.04 (new ubuntu user)

    - by user289168
    I have recently changed my operating system from windows 8 to ubuntu 14.04, when trying to connect to the network via wifi the system just keeps asking for my password over and over without connecting. The connectivity through an Ethernet cable is perfectly fine however and my wifi worked fine through windows 8, I have very little ubuntu knowledge so i apologise if the right information is not shown in this question. Just wondering if there was any known problems or if anyone has seen this before? Thanks in advance for any help, Tom

    Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >