Search Results

Search found 76977 results on 3080 pages for 'create function'.

Page 941/3080 | < Previous Page | 937 938 939 940 941 942 943 944 945 946 947 948  | Next Page >

• Unit testing internal methods in a strongly named assembly/project

  - by Rohit Gupta

  If you need create Unit tests for internal methods within a assembly in Visual Studio 2005 or greater, then we need to add an entry in the AssemblyInfo.cs file of the assembly for which you are creating the units tests for. For e.g. if you need to create tests for a assembly named FincadFunctions.dll & this assembly contains internal/friend methods within which need to write unit tests for then we add a entry in the FincadFunctions.dll’s AssemblyInfo.cs file like so : 1: [assembly: System.Runtime.CompilerServices.InternalsVisibleTo("FincadFunctionsTests")] where FincadFunctionsTests is the name of the Unit Test project which contains the Unit Tests. However if the FincadFunctions.dll is a strongly named assembly then you will the following error when compiling the FincadFunctions.dll assembly :      Friend assembly reference “FincadFunctionsTests” is invalid. Strong-name assemblies must specify a public key in their InternalsVisibleTo declarations. Thus to add a public key token to InternalsVisibleTo Declarations do the following: You need the .snk file that was used to strong-name the FincadFunctions.dll assembly. You can extract the public key from this .snk with the sn.exe tool from the .NET SDK. First we extract just the public key from the key pair (.snk) file into another .snk file. sn -p test.snk test.pub Then we ask for the value of that public key (note we need the long hex key not the short public key token): sn -tp test.pub We end up getting a super LONG string of hex, but that's just what we want, the public key value of this key pair. We add it to the strongly named project "FincadFunctions.dll" that we want to expose our internals from. Before what looked like: 1: [assembly: System.Runtime.CompilerServices.InternalsVisibleTo("FincadFunctionsTests")] Now looks like. 1: [assembly: System.Runtime.CompilerServices.InternalsVisibleTo("FincadFunctionsTests, 2: PublicKey=002400000480000094000000060200000024000052534131000400000100010011fdf2e48bb")] And we're done. hope this helps

  Read the article

• Is there an alternative to Google Code Search?

  - by blunders

  Per the Official Google Blog: Code Search, which was designed to help people search for open source code all over the web, will be shut down along with the Code Search API on January 15, 2012. Google Code Search is now gone, and since that makes it much harder to understand the features it presented, here's my attempt to render them via information I gathered from a cache of the page for the Search Options: The "In Search Box" just notes the syntax to type the command directly in the main search box instead of using the advance search interface. Package (In Search Box: "package:linux-2.6") Language (In Search Box: "lang:c++") (OPTIONS: any language, actionscript, ada, applescript, asp, assembly, autoconf, automake, awk, basic, bat, c, c#, c++, caja, cobol, coldfusion, configure, css, d, eiffel, erlang, fortran, go, haskell, inform, java, java, javascript, jsp, lex, limbo, lisp, lolcode, lua, m4, makefile, maple, mathematica, matlab, messagecatalog, modula2, modula3, objectivec, ocaml, pascal, perl, php, pod, prolog, proto, python, python, r, rebol, ruby, sas, scheme, scilab, sgml, shell, smalltalk, sml, sql, svg, tcl, tex, texinfo, troff, verilog, vhdl, vim, xslt, xul, yacc) File (In Search Box: "file:^.*.java$") Class (In Search Box: "class:HashMap") Function (In Search Box: "function:toString") License (In Search Box: "license:mozilla") (OPTIONS: null/any-license, aladdin/Aladdin-Public-License, artistic/Artistic-License, apache/Apache-License, apple/Apple-Public-Source-License, bsd/BSD-License, cpl/Common-Public-License, epl/Eclipse-Public-License, agpl/GNU-Affero-General-Public-License, gpl/GNU-General-Public-License, lgpl/GNU-Lesser-General-Public-License, disclaimer/Historical-Permission-Notice-and-Disclaimer, ibm/IBM-Public-License, lucent/Lucent-Public-License, mit/MIT-License, mozilla/Mozilla-Public-License, nasa/NASA-Open-Source-Agreement, python/Python-Software-Foundation-License, qpl/Q-Public-License, sleepycat/Sleepycat-License, zope/Zope-Public-License) Case Sensitive (In Search Box: "case:no") (OPTIONS: yes, no) Also of use in understanding the search tool would be the still live FAQs page for Google Code Search. Is there any code search engine that would fully replace Google Code Search's features?

  Read the article

• CISCO Tapi with julmar atapi [closed]

  - by uma

  can we use julmar atapi for accessing cisco tapi/call manager functions?.. Is it a correct way to find solution. How to use cisco tapi with in .net application. Give me any sample code... Thanks in advance.. Sorry for the question with incomplete information. My requirement is, develop the interface for CUCM V8.6 (cisco unified call manager) with asp.net application. we need to communicate with CUCM to get the information about call details and force the user to enter authendication code. i got the information from web is, need C++ wrapper to access Tapi. Julmar Atapi is a free wrapper to access the Tapi. Our client need is , to use CISCO Tapi . My Question is , how to access CISCO Tapi from .Net Application. What is the Requirement? Is Julmar Atapi used to access CISCO Tapi? i want to use cisco FAC(Forced Authorization code) function. how to access this function from my application. Thanks in advance.

  Read the article

• SEO - Google and link cleaning / cloaking [closed]

  - by Jens Törnell

  Possible Duplicate: Does the Google spider render JavaScript? This a SEO related question, not a code related one. Googles own link cleaning / cloaking Gå to http://www.google.com and search for something. Hover the title and you will se a link to the page you want to go to. The URL you see when hovering is NOT the link you are clicking on. Instead of clicking you can drag the title a little bit and then hover it. Then you will se the real URL. My own link cleaning / cloaking Go to http://jsfiddle.net/NvmER/1/ and click the link, or look at the code below. You will be "redirected" to http://www.test.com. The real link are http://www.test.com/?event=23 Working code in case jsfiddle don't work If you need to se how it works I pasted a code below. <a class="direct" href="http://www.test.com/?event=23" data-redirect="http://www.test.com">Länk</a>? $(document).ready(function() { $("a.direct").live("mousedown", function(e){ var oldurl = $(this).attr('href'); var newurl = $(this).attr('data-redirect'); $(this).attr('href', newurl); }); });? Question Is this ok with Google? It's done with javascript. If you have an answer, link to a source or test to support it.

  Read the article

• Creating Transparent Game Menu Items using AndEngine

  - by Chaitanya Chandurkar

  I'm trying to create a Game Menu which contains some Menu Items like New Game Multiplayer Options Exit I want to make this Menu Items Transparent. Only Text in White color should be visible. So i guess i do not need any background image for Menu Items. I have seen examples of SpriteButton like given below. ButtonSprite playButton = new ButtonSprite(0, 0, btnNormalTextureRegion, btnPushedTextureRegion, this.getVertexBufferObjectManager(), new OnClickListener() { @Override public boolean onAreaTouched(TouchEvent pSceneTouchEvent, float pTouchAreaLocalX, float pTouchAreaLocalY) { // Do Stuff here } } The thing which i don't understand is how can i initialize btnNormalTextureRegion? I use the code give below to initialize ITexture and ITextureRegion for objects. mBackgruondTexture = new BitmapTexture(activity.getTextureManager(), new IInputStreamOpener() { public InputStream open() throws IOException { return activity.getAssets().open("gfx/backgrounds/greenbg.jpg"); } }); mBackgruondTextureRegion = TextureRegionFactory.extractFromTexture(mBackgruondTexture); This code openes up an Image from assest. As i do not want to use any image for Menu Item How can i initialize btnNormalTextureRegion for SpriteButton. OR Is there any alternative to create Game Menu?

  Read the article

• How should data be passed between client-side Javascript and C# code behind an ASP.NET app?

  - by ctck

  I'm looking for the most efficient / standard way of passing data between client-side Javascript code and C# code behind an ASP.NET application. I've been using the following methods to achieve this but they all feel a bit of a fudge. To pass data from Javascript to the C# code is by setting hidden ASP variables and triggering a postback: <asp:HiddenField ID="RandomList" runat="server" /> function SetDataField(data) { document.getElementById('<%=RandomList.ClientID%>').value = data; } Then in the C# code I collect the list: protected void GetData(object sender, EventArgs e) { var _list = RandomList.value; } Going back the other way I often use either ScriptManager to register a function and pass it data during Page_Load: ScriptManager.RegisterStartupScript(this.GetType(), "Set","get("Test();",true); or I add attributes to controls before a post back or during the initialization or pre-rendering stages: Btn.Attributes.Add("onclick", "DisplayMessage("Hello");"); These methods have served me well and do the job, but they just dont feel complete. Is there a more standard way of passing data between client side Javascript and C# backend code? Ive seen some posts like this one that describe HtmlElement class; is this something I should look into?

  Read the article

• Organizations &amp; Architecture UNISA Studies &ndash; Chap 7

  - by MarkPearl

  Learning Outcomes Name different device categories Discuss the functions and structure of I/.O modules Describe the principles of Programmed I/O Describe the principles of Interrupt-driven I/O Describe the principles of DMA Discuss the evolution characteristic of I/O channels Describe different types of I/O interface Explain the principles of point-to-point and multipoint configurations Discuss the way in which a FireWire serial bus functions Discuss the principles of InfiniBand architecture External Devices An external device attaches to the computer by a link to an I/O module. The link is used to exchange control, status, and data between the I/O module and the external device. External devices can be classified into 3 categories… Human readable – e.g. video display Machine readable – e.g. magnetic disk Communications – e.g. wifi card I/O Modules An I/O module has two major functions… Interface to the processor and memory via the system bus or central switch Interface to one or more peripheral devices by tailored data links Module Functions The major functions or requirements for an I/O module fall into the following categories… Control and timing Processor communication Device communication Data buffering Error detection I/O function includes a control and timing requirement, to coordinate the flow of traffic between internal resources and external devices. Processor communication involves the following… Command decoding Data Status reporting Address recognition The I/O device must be able to perform device communication. This communication involves commands, status information, and data. An essential task of an I/O module is data buffering due to the relative slow speeds of most external devices. An I/O module is often responsible for error detection and for subsequently reporting errors to the processor. I/O Module Structure An I/O module functions to allow the processor to view a wide range of devices in a simple minded way. The I/O module may hide the details of timing, formats, and the electro mechanics of an external device so that the processor can function in terms of simple reads and write commands. An I/O channel/processor is an I/O module that takes on most of the detailed processing burden, presenting a high-level interface to the processor. There are 3 techniques are possible for I/O operations Programmed I/O Interrupt[t I/O DMA Access Programmed I/O When a processor is executing a program and encounters an instruction relating to I/O it executes that instruction by issuing a command to the appropriate I/O module. With programmed I/O, the I/O module will perform the requested action and then set the appropriate bits in the I/O status register. The I/O module takes no further actions to alert the processor. I/O Commands To execute an I/O related instruction, the processor issues an address, specifying the particular I/O module and external device, and an I/O command. There are four types of I/O commands that an I/O module may receive when it is addressed by a processor… Control – used to activate a peripheral and tell it what to do Test – Used to test various status conditions associated with an I/O module and its peripherals Read – Causes the I/O module to obtain an item of data from the peripheral and place it in an internal buffer Write – Causes the I/O module to take an item of data form the data bus and subsequently transmit that data item to the peripheral The main disadvantage of this technique is it is a time consuming process that keeps the processor busy needlessly I/O Instructions With programmed I/O there is a close correspondence between the I/O related instructions that the processor fetches from memory and the I/O commands that the processor issues to an I/O module to execute the instructions. Typically there will be many I/O devices connected through I/O modules to the system – each device is given a unique identifier or address – when the processor issues an I/O command, the command contains the address of the address of the desired device, thus each I/O module must interpret the address lines to determine if the command is for itself. When the processor, main memory and I/O share a common bus, two modes of addressing are possible… Memory mapped I/O Isolated I/O (for a detailed explanation read page 245 of book) The advantage of memory mapped I/O over isolated I/O is that it has a large repertoire of instructions that can be used, allowing more efficient programming. The disadvantage of memory mapped I/O over isolated I/O is that valuable memory address space is sued up. Interrupts driven I/O Interrupt driven I/O works as follows… The processor issues an I/O command to a module and then goes on to do some other useful work The I/O module will then interrupts the processor to request service when is is ready to exchange data with the processor The processor then executes the data transfer and then resumes its former processing Interrupt Processing The occurrence of an interrupt triggers a number of events, both in the processor hardware and in software. When an I/O device completes an I/O operations the following sequence of hardware events occurs… The device issues an interrupt signal to the processor The processor finishes execution of the current instruction before responding to the interrupt The processor tests for an interrupt – determines that there is one – and sends an acknowledgement signal to the device that issues the interrupt. The acknowledgement allows the device to remove its interrupt signal The processor now needs to prepare to transfer control to the interrupt routine. To begin, it needs to save information needed to resume the current program at the point of interrupt. The minimum information required is the status of the processor and the location of the next instruction to be executed. The processor now loads the program counter with the entry location of the interrupt-handling program that will respond to this interrupt. It also saves the values of the process registers because the Interrupt operation may modify these The interrupt handler processes the interrupt – this includes examination of status information relating to the I/O operation or other event that caused an interrupt When interrupt processing is complete, the saved register values are retrieved from the stack and restored to the registers Finally, the PSW and program counter values from the stack are restored. Design Issues Two design issues arise in implementing interrupt I/O Because there will be multiple I/O modules, how does the processor determine which device issued the interrupt? If multiple interrupts have occurred, how does the processor decide which one to process? Addressing device recognition, 4 general categories of techniques are in common use… Multiple interrupt lines Software poll Daisy chain Bus arbitration For a detailed explanation of these approaches read page 250 of the textbook. Interrupt driven I/O while more efficient than simple programmed I/O still requires the active intervention of the processor to transfer data between memory and an I/O module, and any data transfer must traverse a path through the processor. Thus is suffers from two inherent drawbacks… The I/O transfer rate is limited by the speed with which the processor can test and service a device The processor is tied up in managing an I/O transfer; a number of instructions must be executed for each I/O transfer Direct Memory Access When large volumes of data are to be moved, an efficient technique is direct memory access (DMA) DMA Function DMA involves an additional module on the system bus. The DMA module is capable of mimicking the processor and taking over control of the system from the processor. It needs to do this to transfer data to and from memory over the system bus. DMA must the bus only when the processor does not need it, or it must force the processor to suspend operation temporarily (most common – referred to as cycle stealing). When the processor wishes to read or write a block of data, it issues a command to the DMA module by sending to the DMA module the following information… Whether a read or write is requested using the read or write control line between the processor and the DMA module The address of the I/O device involved, communicated on the data lines The starting location in memory to read from or write to, communicated on the data lines and stored by the DMA module in its address register The number of words to be read or written, communicated via the data lines and stored in the data count register The processor then continues with other work, it delegates the I/O operation to the DMA module which transfers the entire block of data, one word at a time, directly to or from memory without going through the processor. When the transfer is complete, the DMA module sends an interrupt signal to the processor, this the processor is involved only at the beginning and end of the transfer. I/O Channels and Processors Characteristics of I/O Channels As one proceeds along the evolutionary path, more and more of the I/O function is performed without CPU involvement. The I/O channel represents an extension of the DMA concept. An I/O channel ahs the ability to execute I/O instructions, which gives it complete control over I/O operations. In a computer system with such devices, the CPU does not execute I/O instructions – such instructions are stored in main memory to be executed by a special purpose processor in the I/O channel itself. Two types of I/O channels are common A selector channel controls multiple high-speed devices. A multiplexor channel can handle I/O with multiple characters as fast as possible to multiple devices. The external interface: FireWire and InfiniBand Types of Interfaces One major characteristic of the interface is whether it is serial or parallel parallel interface – there are multiple lines connecting the I/O module and the peripheral, and multiple bits are transferred simultaneously serial interface – there is only one line used to transmit data, and bits must be transmitted one at a time With new generation serial interfaces, parallel interfaces are becoming less common. In either case, the I/O module must engage in a dialogue with the peripheral. In general terms the dialog may look as follows… The I/O module sends a control signal requesting permission to send data The peripheral acknowledges the request The I/O module transfers data The peripheral acknowledges receipt of data For a detailed explanation of FireWire and InfiniBand technology read page 264 – 270 of the textbook

  Read the article

• Ruby on Rails - Belongs_to and Active Admin not creating foreign ID

  - by Milo

  I have the following setup: class Category < ActiveRecord::Base has_many :products end class Product < ActiveRecord::Base belongs_to :category has_attached_file :photo, :styles => { :medium => "300x300>", :thumb => "200x200>" } validates_attachment_content_type :photo, :content_type => /\Aimage\/.*\Z/ end ActiveAdmin.register Product do permit_params :title, :price, :slideshow, :photo, :category form do |f| f.inputs "Product Details" do f.input :title f.input :category f.input :price f.input :slideshow f.input :photo, :required => false, :as => :file end f.actions end show do |ad| attributes_table do row :title row :category row :photo do image_tag(ad.photo.url(:medium)) end end end index do column :id column :title column :category column :price do |product| number_to_currency product.price end actions end class ProductController < ApplicationController def create @product = Product.create(params[:id]) end end Every time I make a product item in activeadmin the category comes up empty. It wont populate the column category_id for the product. It just leaves it empty. What am I doing wrong?

  Read the article

• 2D soft-body physics engines?

  - by Griffin

  Hi so i've recently learned the SFML graphics library and would like to use or make a non-rigid body 2D physics system to use with it. I have three questions: The definition of rigid body in Box2d is A chunk of matter that is so strong that the distance between any two bits of matter on the chunk is completely constant. And this is exactly what i don't want as i would like to make elastic, deformable, breakable, and re-connection bodies. 1. Are there any simple 2D physics engines, but with these kinds of characteristics out there? preferably free or opensource? 2. If not could i use box2d and work off of it to create it even if it's based on rigid bodies? 3. Finally, if there is a simple physics engine like this, should i go through with the proccess of creating a new one anyway, simply for experience and to enhance physics math knowledge? I feel like it would help if i ever wanted to modify the code of an existing engine, or create a game with really unique physics. Thanks!

  Read the article

• Slick 2D first trial error

  - by pringlesinn

  I followed some advices to learn Slick2D and when I started doing the "SimpleGame" I got my first error. Does anyone have any idea of what is it and how to fix? Sun Dec 26 23:09:12 GMT-03:00 2010 INFO:Slick Build #274 Sun Dec 26 23:09:12 GMT-03:00 2010 INFO:LWJGL Version: 2.0b1 Sun Dec 26 23:09:12 GMT-03:00 2010 INFO:OriginalDisplayMode: 1024 x 768 x 16 @60Hz Sun Dec 26 23:09:12 GMT-03:00 2010 INFO:TargetDisplayMode: 800 x 600 x 0 @0Hz Sun Dec 26 23:09:12 GMT-03:00 2010 ERROR:Could not find a valid pixel format org.lwjgl.LWJGLException: Could not find a valid pixel format at org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat(Native Method) at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52) at org.lwjgl.opengl.WindowsDisplayPeerInfo.initDC(WindowsDisplayPeerInfo.java:54) at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:158) at org.lwjgl.opengl.Display.createWindow(Display.java:299) at org.lwjgl.opengl.Display.create(Display.java:848) at org.lwjgl.opengl.Display.create(Display.java:800) at org.newdawn.slick.AppGameContainer.tryCreateDisplay(AppGameContainer.java:299) at org.newdawn.slick.AppGameContainer.access$000(AppGameContainer.java:34) at org.newdawn.slick.AppGameContainer$2.run(AppGameContainer.java:364) at java.security.AccessController.doPrivileged(Native Method) at org.newdawn.slick.AppGameContainer.setup(AppGameContainer.java:345) at org.newdawn.slick.AppGameContainer.start(AppGameContainer.java:314) at SimpleGame.main(SimpleGame.java:38) Exception in thread "main" org.newdawn.slick.SlickException: Failed to initialise the LWJGL display at org.newdawn.slick.AppGameContainer.setup(AppGameContainer.java:375) at org.newdawn.slick.AppGameContainer.start(AppGameContainer.java:314) at SimpleGame.main(SimpleGame.java:38)

  Read the article

• Recommended Approach to Secure your ADFdi Spreadsheets

  - by juan.ruiz

  ADF desktop integration leverages ADF security to provide access to published spreadsheets within your application. In this article I discussed a good security practice for your existing as well as any new spreadsheets that you create. ADF Desktop integration uses the adfdiRemoteServlet to process and send request back and fort from and to the ADFmodel which is allocated in the Java EE container where our application is deployed. In other words this is one of the entry points to the application server. Having said that, we need to make sure that container-based security is provided to avoid vulnerabilities. So what is needed? For existing an new ADFdi applications you need to create a Security Constraint for the ADFdi servlet on the Web.xml file of our application. Fortunately JDeveloper 11g provides a nice visual editor to do this. Open the web.xml file and go to the security category Add a new Web Resource Collection give it a meaningful name and on the URL Pattern add /adfdiRemoteServlet click on the Authorization tab and make sure the valid-users  role is selected for authorization and Voila! your application now is more secured.

  Read the article

• Monster's AI in an Action-RPG

  - by Andrea Tucci

  I'm developing an action rpg with some University colleagues. We've gotton to the monsters' AI design and we would like to implement a sort of "utility-based AI" so we have a "thinker" that assigns a numeric value on all the monster's decisions and we choose the highest (or the most appropriate, depending on monster's iq) and assign it in the monster's collection of decisions (like a goal-driven design pattern) . One solution we found is to write a mathematical formula for each decision, with all the important parameters for evaluation (so for a spell-decision we might have mp,distance from player, player's hp etc). This formula also has coefficients representing some of monster's behaviour (in this way we can alterate formulas by changing coefficients). I've also read how "fuzzy logic" works; I was fascinated by it and by the many ways of expansion it has. I was wondering how we could use this technique to give our AI more semplicity, as in create evaluations with fuzzy rules such as IF player_far AND mp_high AND hp_high THEN very_Desiderable (for a spell having an high casting-time and consume high mp) and then 'defuzz' it. In this way it's also simple to create a monster behaviour by creating ad-hoc rules for every monster's IQ category. But is it correct using fuzzy logic in a game with many parameters like an rpg? Is there a way of merging these two techniques? Are there better AI design techniques for evaluating monster's chooses?

  Read the article

• JDBC Connection Pools in Glassfish

  - by Dana Singleterry

  I've been attempting to configure Glassfish 3.1.2.2 for ADF 11g and the need arose to create a jdbc connection pool to my Oracle XE 11g database. While this is really very trivial there were no samples of how to do this and documentation, while good, rarely ever provides concrete examples. After fumbling around for a few minutes searching for an example I gave up and figured it out on my own. Here are the steps for any of you that may be in need. This can be done either via the Glassfish command line tool asadmin or through the admin console. I'm doing this through the admin console. Start Glassfish and connect to the admin console with the credentials you defined at installation: http://localhost:4848 Navigate to Resources | JDBC | JDBC Connection Pools and select New. Be sure to enter Resource Type & Datasource Classname under General Settings tab. You can go with the defaults for Pool Settings etc... View Image Go to the Additional Properties tab and create username, password, and url properties with the respective values. View Image Navigate to Resources | JDBC | JDBC Resources and select New. Be sure to enter the JNDI Name and select the Pool Name for the jdbc connection pool you created previously. View Image Navigate to Configurations | server-config | JVM Settings and select the JVM Options tab. Add the values highlighted: -Doracle.jdbc.J2EE13Compliant=true is used to make sure the driver behaves in a JEE-compliant manner. View Image To integrate the JDBC driver into a GlassFish Server domain, copy the JAR files into the domain-dir/lib directory, then restart the server. The JAR file for the Oracle 11 database driver is ojdbc6dms.jar. An upcoming entry will demonstrate configuring Glassfish for Oracle ADF Applications.

  Read the article

• Unable to cast transparent proxy to type &lt;type&gt;

  - by Rick Strahl

  This is not the first time I've run into this wonderful error while creating new AppDomains in .NET and then trying to load types and access them across App Domains. In almost all cases the problem I've run into with this error the problem comes from the two AppDomains involved loading different copies of the same type. Unless the types match exactly and come exactly from the same assembly the typecast will fail. The most common scenario is that the types are loaded from different assemblies - as unlikely as that sounds. An Example of Failure To give some context, I'm working on some old code in Html Help Builder that creates a new AppDomain in order to parse assembly information for documentation purposes. I create a new AppDomain in order to load up an assembly process it and then immediately unload it along with the AppDomain. The AppDomain allows for unloading that otherwise wouldn't be possible as well as isolating my code from the assembly that's being loaded. The process to accomplish this is fairly established and I use it for lots of applications that use add-in like functionality - basically anywhere where code needs to be isolated and have the ability to be unloaded. My pattern for this is: Create a new AppDomain Load a Factory Class into the AppDomain Use the Factory Class to load additional types from the remote domain Here's the relevant code from my TypeParserFactory that creates a domain and then loads a specific type - TypeParser - that is accessed cross-AppDomain in the parent domain:public class TypeParserFactory : System.MarshalByRefObject,IDisposable { …/// <summary> /// TypeParser Factory method that loads the TypeParser /// object into a new AppDomain so it can be unloaded. /// Creates AppDomain and creates type. /// </summary> /// <returns></returns> public TypeParser CreateTypeParser() { if (!CreateAppDomain(null)) return null; /// Create the instance inside of the new AppDomain /// Note: remote domain uses local EXE's AppBasePath!!! TypeParser parser = null; try { Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; parser = (TypeParser) this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); } catch (Exception ex) { this.ErrorMessage = ex.GetBaseException().Message; return null; } return parser; } private bool CreateAppDomain(string lcAppDomain) { if (lcAppDomain == null) lcAppDomain = "wwReflection" + Guid.NewGuid().ToString().GetHashCode().ToString("x"); AppDomainSetup setup = new AppDomainSetup(); // *** Point at current directory setup.ApplicationBase = AppDomain.CurrentDomain.BaseDirectory; //setup.PrivateBinPath = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "bin"); this.LocalAppDomain = AppDomain.CreateDomain(lcAppDomain,null,setup); // Need a custom resolver so we can load assembly from non current path AppDomain.CurrentDomain.AssemblyResolve += new ResolveEventHandler(CurrentDomain_AssemblyResolve); return true; } …} Note that the classes must be either [Serializable] (by value) or inherit from MarshalByRefObject in order to be accessible remotely. Here I need to call methods on the remote object so all classes are MarshalByRefObject. The specific problem code is the loading up a new type which points at an assembly that visible both in the current domain and the remote domain and then instantiates a type from it. This is the code in question:Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; parser = (TypeParser) this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); The last line of code is what blows up with the Unable to cast transparent proxy to type <type> error. Without the cast the code actually returns a TransparentProxy instance, but the cast is what blows up. In other words I AM in fact getting a TypeParser instance back but it can't be cast to the TypeParser type that is loaded in the current AppDomain. Finding the Problem To see what's going on I tried using the .NET 4.0 dynamic type on the result and lo and behold it worked with dynamic - the value returned is actually a TypeParser instance: Assembly assembly = Assembly.GetExecutingAssembly(); string assemblyPath = Assembly.GetExecutingAssembly().Location; object objparser = this.LocalAppDomain.CreateInstanceFrom(assemblyPath, typeof(TypeParser).FullName).Unwrap(); // dynamic works dynamic dynParser = objparser; string info = dynParser.GetVersionInfo(); // method call works // casting fails parser = (TypeParser)objparser; So clearly a TypeParser type is coming back, but nevertheless it's not the right one. Hmmm… mysterious.Another couple of tries reveal the problem however:// works dynamic dynParser = objparser; string info = dynParser.GetVersionInfo(); // method call works // c:\wwapps\wwhelp\wwReflection20.dll (Current Execution Folder) string info3 = typeof(TypeParser).Assembly.CodeBase; // c:\program files\vfp9\wwReflection20.dll (my COM client EXE's folder) string info4 = dynParser.GetType().Assembly.CodeBase; // fails parser = (TypeParser)objparser; As you can see the second value is coming from a totally different assembly. Note that this is even though I EXPLICITLY SPECIFIED an assembly path to load the assembly from! Instead .NET decided to load the assembly from the original ApplicationBase folder. Ouch! How I actually tracked this down was a little more tedious: I added a method like this to both the factory and the instance types and then compared notes:public string GetVersionInfo() { return ".NET Version: " + Environment.Version.ToString() + "\r\n" + "wwReflection Assembly: " + typeof(TypeParserFactory).Assembly.CodeBase.Replace("file:///", "").Replace("/", "\\") + "\r\n" + "Assembly Cur Dir: " + Directory.GetCurrentDirectory() + "\r\n" + "ApplicationBase: " + AppDomain.CurrentDomain.SetupInformation.ApplicationBase + "\r\n" + "App Domain: " + AppDomain.CurrentDomain.FriendlyName + "\r\n"; } For the factory I got: .NET Version: 4.0.30319.239wwReflection Assembly: c:\wwapps\wwhelp\bin\wwreflection20.dllAssembly Cur Dir: c:\wwapps\wwhelpApplicationBase: C:\Programs\vfp9\App Domain: wwReflection534cfa1f For the instance type I got: .NET Version: 4.0.30319.239wwReflection Assembly: C:\\Programs\\vfp9\wwreflection20.dllAssembly Cur Dir: c:\\wwapps\\wwhelpApplicationBase: C:\\Programs\\vfp9\App Domain: wwDotNetBridge_56006605 which clearly shows the problem. You can see that both are loading from different appDomains but the each is loading the assembly from a different location. Probably a better solution yet (for ANY kind of assembly loading problem) is to use the .NET Fusion Log Viewer to trace assembly loads.The Fusion viewer will show a load trace for each assembly loaded and where it's looking to find it. Here's what the viewer looks like: The last trace above that I found for the second wwReflection20 load (the one that is wonky) looks like this:*** Assembly Binder Log Entry (1/13/2012 @ 3:06:49 AM) *** The operation was successful. Bind result: hr = 0x0. The operation completed successfully. Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework\V4.0.30319\clr.dll Running under executable c:\programs\vfp9\vfp9.exe --- A detailed error log follows. === Pre-bind state information === LOG: User = Ras\ricks LOG: DisplayName = wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null (Fully-specified) LOG: Appbase = file:///C:/Programs/vfp9/ LOG: Initial PrivatePath = NULL LOG: Dynamic Base = NULL LOG: Cache Base = NULL LOG: AppName = vfp9.exe Calling assembly : (Unknown). === LOG: This bind starts in default load context. LOG: Using application configuration file: C:\Programs\vfp9\vfp9.exe.Config LOG: Using host configuration file: LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\V4.0.30319\config\machine.config. LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind). LOG: Attempting download of new URL file:///C:/Programs/vfp9/wwReflection20.DLL. LOG: Assembly download was successful. Attempting setup of file: C:\Programs\vfp9\wwReflection20.dll LOG: Entering run-from-source setup phase. LOG: Assembly Name is: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null LOG: Binding succeeds. Returns assembly from C:\Programs\vfp9\wwReflection20.dll. LOG: Assembly is loaded in default load context. WRN: The same assembly was loaded into multiple contexts of an application domain: WRN: Context: Default | Domain ID: 2 | Assembly Name: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null WRN: Context: LoadFrom | Domain ID: 2 | Assembly Name: wwReflection20, Version=4.61.0.0, Culture=neutral, PublicKeyToken=null WRN: This might lead to runtime failures. WRN: It is recommended to inspect your application on whether this is intentional or not. WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue. Notice that the fusion log clearly shows that the .NET loader makes no attempt to even load the assembly from the path I explicitly specified. Remember your Assembly Locations As mentioned earlier all failures I've seen like this ultimately resulted from different versions of the same type being available in the two AppDomains. At first sight that seems ridiculous - how could the types be different and why would you have multiple assemblies - but there are actually a number of scenarios where it's quite possible to have multiple copies of the same assembly floating around in multiple places. If you're hosting different environments (like hosting the Razor Engine, or ASP.NET Runtime for example) it's common to create a private BIN folder and it's important to make sure that there's no overlap of assemblies. In my case of Html Help Builder the problem started because I'm using COM interop to access the .NET assembly and the above code. COM Interop has very specific requirements on where assemblies can be found and because I was mucking around with the loader code today, I ended up moving assemblies around to a new location for explicit loading. The explicit load works in the main AppDomain, but failed in the remote domain as I showed. The solution here was simple enough: Delete the extraneous assembly which was left around by accident. Not a common problem, but one that when it bites is pretty nasty to figure out because it seems so unlikely that types wouldn't match. I know I've run into this a few times and writing this down hopefully will make me remember in the future rather than poking around again for an hour trying to debug the issue as I did today. Hopefully it'll save some of you some time as well in the future.© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET  COM   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Gesture Detector not firing

  - by Tyler

  So I'm trying to create a input class that implements a InputHandler & GestureListener in order to support both Android & Desktop. The problem is that not all the methods are being called properly. Here is the input class definition & a couple of the methods: public class InputHandler implements GestureListener, InputProcessor{ ... public InputHandler(OrthographicCamera camera, Map m, Player play, Vector2 maxPos) { ... @Override public boolean zoom(float originalDistance, float currentDistance) { //this.zoom = true; this.zoomRatio = originalDistance / currentDistance; cam.zoom = cam.zoom * zoomRatio; Gdx.app.log("GestureDetector", "Zoom - ratio: " + zoomRatio); return true; } @Override public boolean touchDown(int x, int y, int pointerNum, int button) { booleanConditions[TOUCH_EVENT] = true; this.inputButton = button; this.inputFingerNum = pointerNum; this.lastTouchEventLoc.set(x,y); this.currentCursorPos.set(x,y); if(pointerNum == 1) { //this.fingerOne = true; this.fOnePosition.set(x, y); } else if(pointerNum == 2) { //this.fingerTwo = true; this.fTwoPosition.set(x,y); } Gdx.app.log("GestureDetector", "touch down at " + x + ", " + y + ", pointer: " + pointerNum); return true; } The touchDown event always occurs but I can never trigger Zoom (or pan among others...). The following is where I register and create the input handler in the "Game Screen". public class GameScreen implements Screen { ... this.inputHandler = new InputHandler(this.cam, this.map, this.player, this.map.maxCamPos); Gdx.input.setInputProcessor(this.inputHandler); Anyone have any ideas why zoom, pan, etc... are not triggering? Thanks!

  Read the article

• Caveats with the runAllManagedModulesForAllRequests in IIS 7/8

  - by Rick Strahl

  One of the nice enhancements in IIS 7 (and now 8) is the ability to be able to intercept non-managed - ie. non ASP.NET served - requests from within ASP.NET managed modules. This opened up a ton of new functionality that could be applied across non-managed content using .NET code. I thought I had a pretty good handle on how IIS 7's Integrated mode pipeline works, but when I put together some samples last tonight I realized that the way that managed and unmanaged requests fire into the pipeline is downright confusing especially when it comes to the runAllManagedModulesForAllRequests attribute. There are a number of settings that can affect whether a managed module receives non-ASP.NET content requests such as static files or requests from other frameworks like PHP or ASP classic, and this is topic of this blog post. Native and Managed Modules The integrated mode IIS pipeline for IIS 7 and later - as the name suggests - allows for integration of ASP.NET pipeline events in the IIS request pipeline. Natively IIS runs unmanaged code and there are a host of native mode modules that handle the core behavior of IIS. If you set up a new IIS site or application without managed code support only the native modules are supported and fired without any interaction between native and managed code. If you use the Integrated pipeline with managed code enabled however things get a little more confusing as there both native modules and .NET managed modules can fire against the same IIS request. If you open up the IIS Modules dialog you see both managed and unmanaged modules. Unmanaged modules point at physical files on disk, while unmanaged modules point at .NET types and files referenced from the GAC or the current project's BIN folder. Both native and managed modules can co-exist and execute side by side and on the same request. When running in IIS 7 the IIS pipeline actually instantiates a the ASP.NET  runtime (via the System.Web.PipelineRuntime class) which unlike the core HttpRuntime classes in ASP.NET receives notification callbacks when IIS integrated mode events fire. The IIS pipeline is smart enough to detect whether managed handlers are attached and if they're none these notifications don't fire, improving performance. The good news about all of this for .NET devs is that ASP.NET style modules can be used for just about every kind of IIS request. All you need to do is create a new Web Application and enable ASP.NET on it, and then attach managed handlers. Handlers can look at ASP.NET content (ie. ASPX pages, MVC, WebAPI etc. requests) as well as non-ASP.NET content including static content like HTML files, images, javascript and css resources etc. It's very cool that this capability has been surfaced. However, with that functionality comes a lot of responsibility. Because every request passes through the ASP.NET pipeline if managed modules (or handlers) are attached there are possible performance implications that come with it. Running through the ASP.NET pipeline does add some overhead. ASP.NET and Your Own Modules When you create a new ASP.NET project typically the Visual Studio templates create the modules section like this: <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <modules runAllManagedModulesForAllRequests="true" > </modules> </system.webServer> Specifically the interesting thing about this is the runAllManagedModulesForAllRequest="true" flag, which seems to indicate that it controls whether any registered modules always run, even when the value is set to false. Realistically though this flag does not control whether managed code is fired for all requests or not. Rather it is an override for the preCondition flag on a particular handler. With the flag set to the default true setting, you can assume that pretty much every IIS request you receive ends up firing through your ASP.NET module pipeline and every module you have configured is accessed even by non-managed requests like static files. In other words, your module will have to handle all requests. Now so far so obvious. What's not quite so obvious is what happens when you set the runAllManagedModulesForAllRequest="false". You probably would expect that immediately the non-ASP.NET requests no longer get funnelled through the ASP.NET Module pipeline. But that's not what actually happens. For example, if I create a module like this:<add name="SharewareModule" type="HowAspNetWorks.SharewareMessageModule" /> by default it will fire against ALL requests regardless of the runAllManagedModulesForAllRequests flag. Even if the value runAllManagedModulesForAllRequests="false", the module is fired. Not quite expected. So what is the runAllManagedModulesForAllRequests really good for? It's essentially an override for managedHandler preCondition. If I declare my handler in web.config like this:<add name="SharewareModule" type="HowAspNetWorks.SharewareMessageModule" preCondition="managedHandler" /> and the runAllManagedModulesForAllRequests="false" my module only fires against managed requests. If I switch the flag to true, now my module ends up handling all IIS requests that are passed through from IIS. The moral of the story here is that if you intend to only look at ASP.NET content, you should always set the preCondition="managedHandler" attribute to ensure that only managed requests are fired on this module. But even if you do this, realize that runAllManagedModulesForAllRequests="true" can override this setting. runAllManagedModulesForAllRequests and Http Application Events Another place the runAllManagedModulesForAllRequest attribute affects is the Global Http Application object (typically in global.asax) and the Application_XXXX events that you can hook up there. So while the events there are dynamically hooked up to the application class, they basically behave as if they were set with the preCodition="managedHandler" configuration switch. The end result is that if you have runAllManagedModulesForAllRequests="true" you'll see every Http request passed through the Application_XXXX events, and you only see ASP.NET requests with the flag set to "false". What's all that mean? Configuring an application to handle requests for both ASP.NET and other content requests can be tricky especially if you need to mix modules that might require both. Couple of things are important to remember. If your module doesn't need to look at every request, by all means set a preCondition="managedHandler" on it. This will at least allow it to respond to the runAllManagedModulesForAllRequests="false" flag and then only process ASP.NET requests. Look really carefully to see whether you actually need runAllManagedModulesForAllRequests="true" in your applications as set by the default new project templates in Visual Studio. Part of the reason, this is the default because it was required for the initial versions of IIS 7 and ASP.NET 2 in order to handle MVC extensionless URLs. However, if you are running IIS 7 or later and .NET 4.0 you can use the ExtensionlessUrlHandler instead to allow you MVC functionality without requiring runAllManagedModulesForAllRequests="true": <handlers> <remove name="ExtensionlessUrlHandler-Integrated-4.0" /> <add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" /> </handlers> Oddly this is the default for Visual Studio 2012 MVC template apps, so I'm not sure why the default template still adds runAllManagedModulesForAllRequests="true" is - it should be enabled only if there's a specific need to access non ASP.NET requests. As a side note, it's interesting that when you access a static HTML resource, you can actually write into the Response object and get the output to show, which is trippy. I haven't looked closely to see how this works - whether ASP.NET just fires directly into the native output stream or whether the static requests are re-routed directly through the ASP.NET pipeline once a managed code module is detected. This doesn't work for all non ASP.NET resources - for example, I can't do the same with ASP classic requests, but it makes for an interesting demo when injecting HTML content into a static HTML page :-) Note that on the original Windows Server 2008 and Vista (IIS 7.0) you might need a HotFix in order for ExtensionLessUrlHandler to work properly for MVC projects. On my live server I needed it (about 6 months ago), but others have observed that the latest service updates have integrated this functionality and the hotfix is not required. On IIS 7.5 and later I've not needed any patches for things to just work. Plan for non-ASP.NET Requests It's important to remember that if you write a .NET Module to run on IIS 7, there's no way for you to prevent non-ASP.NET requests from hitting your module. So make sure you plan to support requests to extensionless URLs, to static resources like files. Luckily ASP.NET creates a full Request and full Response object for you for non ASP.NET content. So even for static files and even for ASP classic for example, you can look at Request.FilePath or Request.ContentType (in post handler pipeline events) to determine what content you are dealing with. As always with Module design make sure you check for the conditions in your code that make the module applicable and if a filter fails immediately exit - minimize the code that runs if your module doesn't need to process the request.© Rick Strahl, West Wind Technologies, 2005-2012Posted in IIS7   ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• How to structure an application that combines WCF and WPF

  - by CiaranG

  I'm in the process of learning how to use WCF (Windows Communication Foundation) to allow a client/server desktop application to communicate. The application's UI will be implemented using WPF, and we will probably use SQL Server for our database. What I'm struggling with, is understanding how to structure such an application. From what I've read, there are three components of a WCF application (which in the examples I've seen have existed as separate projects): A WCF service A WCF service host A WCF service client My question then, is - should these projects solely implement the functionality of sending/receiving data from the client/server? Would it make better sense this way? Would it make sense to create a separate WPF (Windows Presentation Foundation) project to implement the UI for the application? And so, when I need to send/receive data from the client/server, I could simply invoke the operations provided in the WCF projects that I have created? For anyone who has built similar applications previously, perhaps you could explain what worked best for you in terms of structuring your application? For example, if I create a user registration page. When the user clicks the 'Register' button, the client application will need to send the data to the server. In this case, could I just invoke the methods provided in the WCF projects to send the data? Also, what data structures worked best for you when sending/receiving data? My initial thought is sending/receiving XML containing the data. Is this an option that is easy to implement? I realise that answers to this question may well be a matter of opinion - unless there are specific best practices that I'm not aware of. Thank you

  Read the article

• Browser-based GUI for a python application

  - by ack__

  I want to create a web/browser-based GUI for a command-line python application. The goal is to make use of HTML/JS technologies to create this GUI. As the application itself, it needs to run on Linux and Windows, and the interface will be accessible only from localhost (not exposed to internet). The GUI will contain 5 to 10 pages. I don't want a traditional desktop GUI that includes HTML/JS, but just a bunch of html files and some kind of controller between those and the application. I also want to make use of asynchronous programming (ajax like) so I can load and print data in the GUI without refreshing the whole page. I'd probably use jQuery for that and a couple other things. How would you recommend to design this? Performance is not the key here, I'm rather looking at reliability, portability and simplicity. I'm thinking of using a lightweight python HTTP server / framework (like CherryPy) and maybe later a Python templating system (at the begining it will just be a couple pages). EDIT: I'm looking for ideas/recommendations how to build this, not for alternatives to browser/web-based GUI.

  Read the article

• Making a Statement: How to retrieve the T-SQL statement that caused an event

  - by extended_events

  If you’ve done any troubleshooting of T-SQL, you know that sooner or later, probably sooner, you’re going to want to take a look at the actual statements you’re dealing with. In extended events we offer an action (See the BOL topic that covers Extended Events Objects for a description of actions) named sql_text that seems like it is just the ticket. Well…not always – sounds like a good reason for a blog post. When is a statement not THE statement? The sql_text action returns the same information that is returned from DBCC INPUTBUFFER, which may or may not be what you want. For example, if you execute a stored procedure, the sql_text action will return something along the lines of “EXEC sp_notwhatiwanted” assuming that is the statement you sent from the client. Often times folks would like something more specific, like the actual statements that are being run from within the stored procedure or batch. Enter the stack Extended events offers another action, this one with the descriptive name of tsql_stack, that includes the sql_handle and offset information about the statements being run when an event occurs. With the sql_handle and offset values you can retrieve the specific statement you seek using the DMV dm_exec_sql_statement. The BOL topic for dm_exec_sql_statement provides an example for how to extract this information, so I’ll cover the gymnastics required to get the sql_handle and offset values out of the tsql_stack data collected by the action. I’m the first to admit that this isn’t pretty, but this is what we have in SQL Server 2008 and 2008 R2. We will be making it easier to get statement level information in the next major release of SQL Server. The sample code For this example I have a stored procedure that includes multiple statements and I have a need to differentiate between those two statements in my tracing. I’m going to track two events: module_end tracks the completion of the stored procedure execution and sp_statement_completed tracks the execution of each statement within a stored procedure. I’m adding the tsql_stack events (since that’s the topic of this post) and the sql_text action for comparison sake. (If you have questions about creating event sessions, check out Pedro’s post Introduction to Extended Events.) USE AdventureWorks2008GO -- Test SPCREATE PROCEDURE sp_multiple_statementsASSELECT 'This is the first statement'SELECT 'this is the second statement'GO -- Create a session to look at the spCREATE EVENT SESSION track_sprocs ON SERVERADD EVENT sqlserver.module_end (ACTION (sqlserver.tsql_stack, sqlserver.sql_text)),ADD EVENT sqlserver.sp_statement_completed (ACTION (sqlserver.tsql_stack, sqlserver.sql_text))ADD TARGET package0.ring_bufferWITH (MAX_DISPATCH_LATENCY = 1 SECONDS)GO -- Start the sessionALTER EVENT SESSION track_sprocs ON SERVERSTATE = STARTGO -- Run the test procedureEXEC sp_multiple_statementsGO -- Stop collection of events but maintain ring bufferALTER EVENT SESSION track_sprocs ON SERVERDROP EVENT sqlserver.module_end,DROP EVENT sqlserver.sp_statement_completedGO Aside: Altering the session to drop the events is a neat little trick that allows me to stop collection of events while keeping in-memory targets such as the ring buffer available for use. If you stop the session the in-memory target data is lost. Now that we’ve collected some events related to running the stored procedure, we need to do some processing of the data. I’m going to do this in multiple steps using temporary tables so you can see what’s going on; kind of like having to “show your work” on a math test. The first step is to just cast the target data into XML so I can work with it. After that you can pull out the interesting columns, for our purposes I’m going to limit the output to just the event name, object name, stack and sql text. You can see that I’ve don a second CAST, this time of the tsql_stack column, so that I can further process this data. -- Store the XML data to a temp tableSELECT CAST( t.target_data AS XML) xml_dataINTO #xml_event_dataFROM sys.dm_xe_sessions s INNER JOIN sys.dm_xe_session_targets t    ON s.address = t.event_session_addressWHERE s.name = 'track_sprocs' SELECT * FROM #xml_event_data -- Parse the column data out of the XML blockSELECT    event_xml.value('(./@name)', 'varchar(100)') as [event_name],    event_xml.value('(./data[@name="object_name"]/value)[1]', 'varchar(255)') as [object_name],    CAST(event_xml.value('(./action[@name="tsql_stack"]/value)[1]','varchar(MAX)') as XML) as [stack_xml],    event_xml.value('(./action[@name="sql_text"]/value)[1]', 'varchar(max)') as [sql_text]INTO #event_dataFROM #xml_event_data    CROSS APPLY xml_data.nodes('//event') n (event_xml) SELECT * FROM #event_data event_name object_name stack_xml sql_text sp_statement_completed NULL <frame level="1" handle="0x03000500D0057C1403B79600669D00000100000000000000" line="4" offsetStart="94" offsetEnd="172" /><frame level="2" handle="0x01000500CF3F0331B05EC084000000000000000000000000" line="1" offsetStart="0" offsetEnd="-1" /> EXEC sp_multiple_statements sp_statement_completed NULL <frame level="1" handle="0x03000500D0057C1403B79600669D00000100000000000000" line="6" offsetStart="174" offsetEnd="-1" /><frame level="2" handle="0x01000500CF3F0331B05EC084000000000000000000000000" line="1" offsetStart="0" offsetEnd="-1" /> EXEC sp_multiple_statements module_end sp_multiple_statements <frame level="1" handle="0x03000500D0057C1403B79600669D00000100000000000000" line="0" offsetStart="0" offsetEnd="0" /><frame level="2" handle="0x01000500CF3F0331B05EC084000000000000000000000000" line="1" offsetStart="0" offsetEnd="-1" /> EXEC sp_multiple_statements After parsing the columns it’s easier to see what is recorded. You can see that I got back two sp_statement_completed events, which makes sense given the test procedure I’m running, and I got back a single module_end for the entire statement. As described, the sql_text isn’t telling me what I really want to know for the first two events so a little extra effort is required. -- Parse the tsql stack information into columnsSELECT    event_name,    object_name,    frame_xml.value('(./@level)', 'int') as [frame_level],    frame_xml.value('(./@handle)', 'varchar(MAX)') as [sql_handle],    frame_xml.value('(./@offsetStart)', 'int') as [offset_start],    frame_xml.value('(./@offsetEnd)', 'int') as [offset_end]INTO #stack_data    FROM #event_data        CROSS APPLY    stack_xml.nodes('//frame') n (frame_xml)    SELECT * from #stack_data event_name object_name frame_level sql_handle offset_start offset_end sp_statement_completed NULL 1 0x03000500D0057C1403B79600669D00000100000000000000 94 172 sp_statement_completed NULL 2 0x01000500CF3F0331B05EC084000000000000000000000000 0 -1 sp_statement_completed NULL 1 0x03000500D0057C1403B79600669D00000100000000000000 174 -1 sp_statement_completed NULL 2 0x01000500CF3F0331B05EC084000000000000000000000000 0 -1 module_end sp_multiple_statements 1 0x03000500D0057C1403B79600669D00000100000000000000 0 0 module_end sp_multiple_statements 2 0x01000500CF3F0331B05EC084000000000000000000000000 0 -1 Parsing out the stack information doubles the fun and I get two rows for each event. If you examine the stack from the previous table, you can see that each stack has two frames and my query is parsing each event into frames, so this is expected. There is nothing magic about the two frames, that’s just how many I get for this example, it could be fewer or more depending on your statements. The key point here is that I now have a sql_handle and the offset values for those handles, so I can use dm_exec_sql_statement to get the actual statement. Just a reminder, this DMV can only return what is in the cache – if you have old data it’s possible your statements have been ejected from the cache. “Old” is a relative term when talking about caches and can be impacted by server load and how often your statement is actually used. As with most things in life, your mileage may vary. SELECT    qs.*,     SUBSTRING(st.text, (qs.offset_start/2)+1,         ((CASE qs.offset_end          WHEN -1 THEN DATALENGTH(st.text)         ELSE qs.offset_end         END - qs.offset_start)/2) + 1) AS statement_textFROM #stack_data AS qsCROSS APPLY sys.dm_exec_sql_text(CONVERT(varbinary(max),sql_handle,1)) AS st event_name object_name frame_level sql_handle offset_start offset_end statement_text sp_statement_completed NULL 1 0x03000500D0057C1403B79600669D00000100000000000000 94 172 SELECT 'This is the first statement' sp_statement_completed NULL 1 0x03000500D0057C1403B79600669D00000100000000000000 174 -1 SELECT 'this is the second statement' module_end sp_multiple_statements 1 0x03000500D0057C1403B79600669D00000100000000000000 0 0 C Now that looks more like what we were after, the statement_text field is showing the actual statement being run when the sp_statement_completed event occurs. You’ll notice that it’s back down to one row per event, what happened to frame 2? The short answer is, “I don’t know.” In SQL Server 2008 nothing is returned from dm_exec_sql_statement for the second frame and I believe this to be a bug; this behavior has changed in the next major release and I see the actual statement run from the client in frame 2. (In other words I see the same statement that is returned by the sql_text action  or DBCC INPUTBUFFER) There is also something odd going on with frame 1 returned from the module_end event; you can see that the offset values are both 0 and only the first letter of the statement is returned. It seems like the offset_end should actually be –1 in this case and I’m not sure why it’s not returning this correctly. This behavior is being investigated and will hopefully be corrected in the next major version. You can workaround this final oddity by ignoring the offsets and just returning the entire cached statement. SELECT    event_name,    sql_handle,    ts.textFROM #stack_data    CROSS APPLY sys.dm_exec_sql_text(CONVERT(varbinary(max),sql_handle,1)) as ts event_name sql_handle text sp_statement_completed 0x0300070025999F11776BAF006F9D00000100000000000000 CREATE PROCEDURE sp_multiple_statements AS SELECT 'This is the first statement' SELECT 'this is the second statement' sp_statement_completed 0x0300070025999F11776BAF006F9D00000100000000000000 CREATE PROCEDURE sp_multiple_statements AS SELECT 'This is the first statement' SELECT 'this is the second statement' module_end 0x0300070025999F11776BAF006F9D00000100000000000000 CREATE PROCEDURE sp_multiple_statements AS SELECT 'This is the first statement' SELECT 'this is the second statement' Obviously this gives more than you want for the sp_statement_completed events, but it’s the right information for module_end. I leave it to you to determine when this information is needed and use the workaround when appropriate. Aside: You might think it’s odd that I’m showing apparent bugs with my samples, but you’re going to see this behavior if you use this method, so you need to know about it.I’m all about transparency. Happy Eventing- Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• help animating player in corona sdk

  - by andrew McCutchan

  working on a game in the corona sdk with lua and I need help so the player animates on the line drawn. Right now he animates at the beggining and the end but not on the line. here is the player code function spawnPlayerObject(xPlayerSpawn,yPlayerSpawn,richTurn) --spawns Rich where we need him. -- riches sprite sheet and all his inital spirites. We need to adjust this so that animations 3-6 are the only ones that animate when moving horizontally local richPlayer = sprite.newSpriteSet(richSheet1,1,6) sprite.add(richPlayer, "rich", 1,6,500,1) rich = sprite.newSprite(richPlayer) rich.x = xPlayerSpawn rich.y = yPlayerSpawn rich:scale(_W*0.0009, _W*0.0009) -- scale is used to adjust the size of the object. richDir = richTurn rich.rotation = richDir rich:prepare("rich") rich:play() physics.addBody( rich, "static", { friction=1, radius = 15 } ) -- needs a better physics body for collision detection. end and here is the code for the line function movePlayerOnLine(event) --for the original image replace all rich with player. if posCount ~= linePart then richDir = math.atan2(ractgangle_hit[posCount].y-rich.y,ractgangle_hit[posCount].x-rich.x)*180/math.pi playerSpeed = 5 rich.x = rich.x + math.cos(richDir*math.pi/180)*playerSpeed rich.y = rich.y + math.sin(richDir*math.pi/180)*playerSpeed if rich.x < ractgangle_hit[posCount].x+playerSpeed*10 and rich.x > ractgangle_hit[posCount].x-playerSpeed*10 then if rich.y < ractgangle_hit[posCount].y+playerSpeed*10 and rich.y > ractgangle_hit[posCount].y-playerSpeed*10 then posCount = posCount + 1 end end I don't think anything has changed recently but I have been getting an error when testing of " attempt to upvalue "rich" a nil value" on the second line, richDir = etc.

  Read the article

• Change Data Capture

  - by Ricardo Peres

  There's an hidden gem in SQL Server 2008: Change Data Capture (CDC). Using CDC we get full audit capabilities with absolutely no implementation code: we can see all changes made to a specific table, including the old and new values! You can only use CDC in SQL Server 2008 Standard or Enterprise, Express edition is not supported. Here are the steps you need to take, just remember SQL Agent must be running: use SomeDatabase; -- first create a table CREATE TABLE Author ( ID INT NOT NULL PRIMARY KEY IDENTITY(1, 1), Name NVARCHAR(20) NOT NULL, EMail NVARCHAR(50) NOT NULL, Birthday DATE NOT NULL ) -- enable CDC at the DB level EXEC sys.sp_cdc_enable_db -- check CDC is enabled for the current DB SELECT name, is_cdc_enabled FROM sys.databases WHERE name = 'SomeDatabase' -- enable CDC for table Author, all columns exec sys.sp_cdc_enable_table @source_schema = 'dbo', @source_name = 'Author', @role_name = null -- insert values into table Author insert into Author (Name, EMail, Birthday, Username) values ('Bla', 'bla@bla', 1990-10-10, 'bla') -- check CDC data for table Author -- __$operation: 1 = DELETE, 2 = INSERT, 3 = BEFORE UPDATE 4 = AFTER UPDATE -- __$start_lsn: operation timestamp select * from cdc.dbo_author_CT -- update table Author update Author set EMail = '[email protected]' where Name = 'Bla' -- check CDC data for table Author select * from cdc.dbo_author_CT -- delete from table Author delete from Author -- check CDC data for table Author select * from cdc.dbo_author_CT -- disable CDC for table Author -- this removes all CDC data, so be carefull exec sys.sp_cdc_disable_table @source_schema = 'dbo', @source_name = 'Author', @capture_instance = 'dbo_Author' -- disable CDC for the entire DB -- this removes all CDC data, so be carefull exec sys.sp_cdc_disable_db SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.all();

  Read the article

• Ubuntu 12.04 + Raid0 + Windows 7 not loading

  - by Douglas

  please someone help me.... (Sorry for my english) Hi, I have a Pc with 2 Hd (1Tb each) on Raid0. I had a Windows 7 64bits working for several months. When I installed the Windows I let a 100Gb partition empty to install Ubuntu someday. I was using Linux on a Virtualbox, but this week I tried to install Ubuntu 12.04 in this 100Gb partition. I used the Ubuntu alternate cd, because the 'normal' cd was giving me trouble with the Raid0. The grub installation always reported a error. After a lot of work I found that I nedded to install grub on partition /dev/mapper/isw_chjbfeec_DougRaid1 (see Bootinfo below). The Windows installation created a 100Mb boot partition, so I needed to install grub in this partition. Now I have the Ubuntu working 100% ok. The problem is, the Windows is not booting! The windows option is present on the grub menu, but when I choose the windows option there is a black screen and after that the grub is reloaded. My Bootinfo is: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. => Grub2 (v1.99) is installed in the MBR of /dev/mapper/isw_chjbfeec_DougRaid and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. sda1: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: isw_chjbfeec_DougRaid1: ________________________________________________________ File system: ntfs Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of isw_chjbfeec_DougRaid1 and looks at sector 3841862992 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. No errors found in the Boot Parameter Block. Operating System: Boot files: /grldr /bootmgr /Boot/BCD /grldr isw_chjbfeec_DougRaid2: ________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe isw_chjbfeec_DougRaid3: ________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: isw_chjbfeec_DougRaid5: ________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img isw_chjbfeec_DougRaid6: ________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/sda3 3,686,402,558 3,907,039,743 220,637,186 5 Extended Invalid MBR Signature found. EBR refers to a location outside the hard drive. /dev/sda2 ends after the last sector of /dev/sda /dev/sda3 ends after the last sector of /dev/sda Drive: isw_chjbfeec_DougRaid _____________________________________________________________________ Disk /dev/mapper/isw_chjbfeec_DougRaid: 2000.4 GB, 2000404348928 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907039744 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/mapper/isw_chjbfeec_DougRaid1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid3 3,686,402,558 3,907,039,743 220,637,186 5 Extended /dev/mapper/isw_chjbfeec_DougRaid5 3,686,402,560 3,881,876,479 195,473,920 83 Linux /dev/mapper/isw_chjbfeec_DougRaid6 3,881,876,992 3,907,039,743 25,162,752 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/mapper/isw_chjbfeec_DougRaid1 C89C73D19C73B910 ntfs Reservado pelo Sistema /dev/mapper/isw_chjbfeec_DougRaid2 6830883A3088116C ntfs /dev/mapper/isw_chjbfeec_DougRaid5 bbab868a-ea53-4be3-ba7d-2737fe6cb24c ext4 /dev/mapper/isw_chjbfeec_DougRaid6 7a830a3c-88fb-4cba-80dc-f32e08abfd5b swap /dev/sda isw_raid_member /dev/sdb isw_raid_member /dev/sr0 iso9660 Windows7x86x64SK ========================= "ls -R /dev/mapper/" output: ========================= /dev/mapper: control isw_chjbfeec_DougRaid isw_chjbfeec_DougRaid1 isw_chjbfeec_DougRaid2 isw_chjbfeec_DougRaid3 isw_chjbfeec_DougRaid5 isw_chjbfeec_DougRaid6 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 (rw,errors=remount-ro) /dev/sr0 /media/Windows7x86x64SK iso9660 (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks) ================= isw_chjbfeec_DougRaid1/grldr embedded menu: ================== -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ================== isw_chjbfeec_DougRaid5/boot/grub/grub.cfg: ================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-24-generic-pae ...' linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic-pae } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-23-generic-pae ...' linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic-pae } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober_proxy ### menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } ### END /etc/grub.d/30_os-prober_proxy ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- ====================== isw_chjbfeec_DougRaid5/etc/fstab: ======================= -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 errors=remount-ro 0 1 /dev/mapper/isw_chjbfeec_DougRaid6 none swap sw 0 0 -------------------------------------------------------------------------------- ========== isw_chjbfeec_DougRaid5: Location of files loaded by Grub: =========== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-23-generic-pae 2 = boot/initrd.img-3.2.0-24-generic-pae 2 = boot/vmlinuz-3.2.0-23-generic-pae 1 = boot/vmlinuz-3.2.0-24-generic-pae 1 = initrd.img 2 = initrd.img.old 2 = vmlinuz 1 = vmlinuz.old 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda1 Unknown BootLoader on sda2 Unknown BootLoader on sda3 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda3: No such file or directory hexdump: /dev/sda3: No such file or directory xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in How we can see the Windows part at grub is: menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } I tried a lot of combinations at the line: set root='(sda,msdos1)' , but no success I tried to change uuid to the /dev/mapper/isw_chjbfeec_DougRaid2 uuid, but the grub reports a error. I dont know what to do now. I really need to boot my windows partition. Someone knows what to do? Thanks........

  Read the article

• SSIS Reporting Pack – a performance tip

  - by jamiet

  SSIS Reporting Pack is a suite of open source SQL Server Reporting Services (SSRS) reports that provide additional insight into the SQL Server Integration Services (SSIS) 2012 Catalog. You can read more about SSIS Reporting Pack here on my blog or had over to the home page for the project at http://ssisreportingpack.codeplex.com/. After having used SSRS Reporting Pack on a real project for a few months now I have come to realise that if you have any sizeable data volumes in [SSISDB] then the reports in SSIS Reporting Pack will suffer from chronic performance problems – I have seen the “execution” report take upwards of 30minutes to return data. To combat this I highly recommend that you create an index on the [SSISDB].[internal].[event_messages].[operation_id] & [SSISDB].[internal].[operation_messages].[operation_id] fields. Phil Brammer has experienced similar problems himself and has since made it easy for the rest of us by preparing some scripts to create the indexes that he recommends and he has shared those scripts via his blog at http://www.ssistalk.com/SSIS_2012_Missing_Indexes.zip. If you are using SSIS Reporting Pack, or even if you are simply querying [SSISDB], I highly recommend that you download Phil’s scripts and test them out on your own SSIS Catalog(s). Those indexes will not solve all problems but they will make some of your reports run quicker. I am working on some further enhancements that should further improve the performance of the reports. Watch this space. @Jamiet

  Read the article

• mysql service do not launch

  - by ted

  Sorry for my English; I was trying to create db with rake in RoR application that has been configured for MySQL(gem installed, settings changed). After that attempt mysql-server broke: d@calister:~$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) mysqld is not running at all: d@calister:~$ ps aux | grep mysql d 3769 0.0 0.0 4368 832 pts/0 S+ 18:03 0:00 grep --color=auto mysql And also it doesn't seem it would like to run: d@calister:~$ sudo service mysql start start: Job failed to start Any suggestions? Thanks EDIT: d@calister:~$ sudo -u mysql mysqld 120520 18:45:11 [Note] Plugin 'FEDERATED' is disabled. mysqld: Table 'mysql.plugin' doesn't exist 120520 18:45:11 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 120520 18:45:11 InnoDB: The InnoDB memory heap is disabled 120520 18:45:11 InnoDB: Mutexes and rw_locks use GCC atomic builtins 120520 18:45:11 InnoDB: Compressed tables use zlib 1.2.3.4 120520 18:45:11 InnoDB: Initializing buffer pool, size = 128.0M 120520 18:45:11 InnoDB: Completed initialization of buffer pool 120520 18:45:11 InnoDB: highest supported file format is Barracuda. 120520 18:45:12 InnoDB: Waiting for the background threads to start 120520 18:45:13 InnoDB: 1.1.8 started; log sequence number 1589459 120520 18:45:13 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist

  Read the article

• Sesame Data Browser: filtering, sorting, selecting and linking

  - by Fabrice Marguerie

  I have deferred the post about how Sesame is built in favor of publishing a new update.This new release offers major features such as the ability to quickly filter and sort data, select columns, and create hyperlinks to OData. Filtering, sorting, selecting In order to filter data, you just have to use the filter row, which becomes available when you click on the funnel button: You can then type some text and select an operator: The data grid will be refreshed immediately after you apply a filter. It works in the same way for sorting. Clicking on a column will immediately update the query and refresh the grid.Note that multi-column sorting is possible by using SHIFT-click: Viewing data is not enough. You can also view and copy the query string that returns that data: One more thing you can to shape data is to select which columns are displayed. Simply use the Column Chooser and you'll be done: Again, this will update the data and query string in real time: Linking to Sesame, linking to OData The other main feature of this release is the ability to create hyperlinks to Sesame. That's right, you can ask Sesame to give you a link you can display on a webpage, send in an email, or type in a chat session. You can get a link to a connection: or to a query: You'll note that you can also decide to embed Sesame in a webpage... Here are some sample links created via Sesame: Netflix movies with high ratings, sorted by release year Netflix horror movies from the 21st century Northwind discontinued products with remaining stock Netflix empty connection I'll give more examples in a post to follow. There are many more minor improvements in this release, but I'll let you find out about them by yourself :-)Please try Sesame Data Browser now and let me know what you think! PS: if you use Sesame from the desktop, please use the "Remove this application" command in the context menu of the destkop app and then "Install on desktop" again in your web browser. I'll activate automatic updates with the next release.

  Read the article

< Previous Page | 937 938 939 940 941 942 943 944 945 946 947 948  | Next Page >