Search Results

Search found 259224 results on 10369 pages for 'hardware enablement stack'.

Page 95/10369 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

  • Evaluate a vendor laptop before deployment to user?

    - by NetWarrior
    I get numerous requests from executives and users for new smaller laptops for travel purposes. Most of my evaluation is based upon whether or not it can run certain applications. Mainly lotus notes, office, and video. Most of the laptops include windows 7 OS, and are fully loaded with ram, a high-end processor and a integrated graphics card. My boss whats me to document the usefulness of the laptop and performance. I'm just a little confused on how to setup a document that can be used by members of the IT department for future evaluations.

    Read the article

  • USB port causing device problems after new motherboard upgrade

    - by enbuyukfener
    I'm looking into a PC with an issue with one of the front USB ports (perhaps both). It was working before a motherboard upgrade but since then, a USB drive was inserted, overheated and does not appear to be working. Then a phone (with USB charging) was plugged in, and the phone OS suspended. Removing and re-inserting the battery led to the phone (and hence battery) working, however the battery no longer charges (including with a wall charger). It seems too much to be a coincidence and am wondering what the issue may be? Ideas so far are short circuiting, or over-current to the USB ports. Note: Did not occur to me, so details are not 100% accurate or complete. Feel free to ask for missing info that I may have forgotten though.

    Read the article

  • toshiba a200 laptop hangs/freezes when plugged in

    - by tapan
    The subject says it all. It is the exact same problem as described here. I had asked a similar question before here. My system specs etc, everything is here. My problem is just that I cannot afford to get it fixed right now. I just need for the laptop to be kind of usable for 2-3 more months. It worked perfectly for 3 months or so in ubuntu recovery mode. Now it hangs/freezes every hour. I spend 8 hours a day on an average on my laptop. So i just want it to last at least that long. If the laptop is not plugged in in recovery mode / regular ubuntu mode, it freezes in 5 mins and the screen becomes all weird. With my windows 7 OS, it works perfectly on battery but hangs instantly as soon as it is plugged in. Also now, a high cpu usage doesn't help anymore. Any strategy or suggestions i could employ to extend the duration for which it doesn't freeze ?

    Read the article

  • Asus Eee replacement netbook monitor doesn't fit connector

    - by Michael Morisy
    I bought a replacement screen for an Asus Eee netbook 1005HA from a company that said the screen they were selling was compatible, but the connector on the replacement is smaller than the original. I've scoured the net for instructions, but so far, I'm out of luck. As far as I can tell, they both have 32 pins, but maybe I'm missing a connector? The replacement is a [LG Philips 10.1 inchs Glossy LED Panel Screen][1]. Picture of two connectors I couldn't include due to low rep. The replacement is on the left.

    Read the article

  • Complete machine freezes...at a loss

    - by user28818
    Guys, We built around 12 machines a few months ago to run Ubuntu. They each have the following specs: ASUS Z8NA-D6 motherboard Dual quad core Intel(R) Xeon(R) CPU E5520 @ 2.27GHz OCZ Mod Extreme Pro 500W power supply 12 GB Kingston RAM Nvidia GeForce 9800 GT graphics card My machine ran well for awhile. However, it started experiencing random lockups. These lockups are not X lockups, they are complete system freezes. The nic stops responding, the magic sysrq buttons won't work. The machine is dead. I first suspected RAM. Memtest86 didn't find anything, but I replaced the RAM anyway. Still, lockups. So I replaced the graphics card. Still, more lockups. They became more and more frequent and started to happen 2-3 times a day. So I replaced the motherboard and power supply in one fell swoop. Suddenly, no more lockups! Woohoo! Except, a week later, in the morning, the machine wouldn't wake up. I reset it, started it up, and the log files showed the last entry at around 11 pm the evening before. This has started occurring with more frequency...now just about every morning I come in, the machine is locked up, and has been since the night before. Yesterday, in the 3 weeks since I replaced the motherboard and power supply, the machine actually locked up on in in mid-work. This is the first time since replacing the two (MB and PS) that this happened while I was using it. All others occurred while I was away. I'm at a loss. Nothing is in syslog or message that would indicate a problem around the time of the lockup. Temps are good...I use lmsensors to monitor and have a script that writes the output to file every minute. They never get that high. The only thing I haven't replaced at this point is the case and the harddrives. I doubt either could be the cause. What would you do if you were in my shoes? Is there a troubleshooting approach I'm missing? For the record, all of the other machines, all eleven of them, don't have any problems. They're all running the same version of Ubuntu (Lucid) that I am. Thanks!

    Read the article

  • Configuring a monitor's contrast/brightess/colours/etc

    - by DMA57361
    I have recently bought myself a new monitor, now I'd had my previous screen well over 5 years now so I'm looking at this one thinking the picture doesn't quite look right (not bad, just different). Rather than just wait until I'm used to the new picture I'd rather get it fine tuned, then get used to it - so I can reap the maximum benefit. So, can you please suggest reliable ways of configuring an LCD monitor's brightness/contrast/colour/etc to provide the optimum possibly quality image?

    Read the article

  • New harddrives failing within weeks.

    - by Jason Kealey
    I've experienced 8 hard disk failures in 3 months and have tried many things to solve the issue permanently but I have failed. I would like to know if you have any advice for me. System was running Win XP on an Asus P5W-DH Deluxe. I have setup a RAID-1 array. I started out with 2 x 500 GB 7200RPM Western Digital drives. One died. I took it out to RMA it. On the same day, the router was fried. Assumed a power surge occurred; connected an older UPS to protect the system. Once I got my hands on an identical disk, I installed it. The RAID array was rebuilt. A few days later, the other one died. Assumed the rebuild caused it to fail. Took it out for RMA. Before the other one arrived, the remaining one died. I then discovered I could re-enable them using the Intel Matrix Storage Manager. I re-enabled both and the system seemed fine for a week, until both died again. I got two new 1.5 TB 7200RPM Seagate drives and re-installed Windows 7. Also replaced the UPS and power supply. They both died again. The voltage on the plug is stable between 120 and 122V as per the UPS. None of the other devices have had any problems (monitors, etc.). At this point, I see two options: a) electrical issue in the house that was, for some reason, not blocked by the UPS. b) something else inside the system causing surges? motherboard? onboard raid controller? Failures happen fairly quickly, between 2 and 14 days after I fix the previous issue. I just gotten a new computer (Core i7) to replace it. If it is stable, I can determine that b) was the problem. If it fries its hard drive again, I can determine that it is an electrical issue in the house. Do you have any other thoughts? Any tools I can run on the drives that failed to get more information about the original SMART event history?

    Read the article

  • How to use dedicated video card instead of onboard?

    - by Mathias Lykkegaard Lorenzen
    Hi there! I tried running DxDiag (DirectX diagnostics), and I noticed that my graphics card is set to the onboard one that comes with the Core i5 processor (some Intel HD stuff). On my computer, I also have a dedicated graphics card (an Nvidia 310). No serious gaming stuff, I know - just for programming. However, I would still love to know how to switch to that dedicated graphics card instead. My laptop is an MSI CX720.

    Read the article

  • Is it normal for a SAS drive to have a few bad blocks, or should I replace my drive ASAP?

    - by Nate
    I have a drive—part of a RAID 1 mirror—that has two bad blocks. Adaptec Storage Manger e-mailed me when it detected the blocks. It shows 4 medium errors for that drive, but state is still “optimal”. This is my first time using Adaptec RAID controllers. I don’t know if an occasional bad block is normal, or if I should immediately replace that drive. Update: The drive failed later the same day! The disk subsystem is: Adaptec 6405 with ZMM (2) Seagate near-line SAS drives (ST31000424SS) The other drive hasn’t reported any bad blocks yet. I am running a consistency check.

    Read the article

  • Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

    - by Chake
    here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

    Read the article

  • How can I get multiple video cards to work on linux?

    - by user17943
    I installed fedora 12. I have 2 ATI cards that I used to use on windows to run 4 monitors. A recurring problem has been to get them detected in linux. Only my secondary card is picked up linux. When I manage the displays it detects the 2 monitors connected that card. What are the specific steps I should take to get the second card detected? Supposedly there is a tool system-config-xfree. I don't have it, yum can't find it. Also I heard it has something to do with editing some xorg.conf file or something to that effect. I have absolutely no idea how to find the "bus id" of my card, or lookup the horizontal refresh rates, etc.. I would probably have no problem following the documentation & editing the file if I knew a good way to find these values. Someone also suggested installing linux twice and saving the xorg.conf it generates each time (with different card each time) and then merging the two by hand. That is like killing a fly with a hammer though, when I do this again and again in the future It'd be nice to not have to take twice as long. Thanks

    Read the article

  • Did my hard drive fail or is it something else?

    - by Julian
    Last night while I was watched a movie on my laptop the external monitor just went blank and the built-in display froze. Weird I thought, so I restarted it only to be greeted with this heart-breaking message. "No Operating System Found". After a few panicked restarts I accepted the fact that my hard drive might be done :(. Being the resourceful technie that I am, I whipped out Ubuntu Live on my old Flash Drive and was up and running before day break. I cannot access the hard drive through Ubuntu (which I expected) but I also cannot access my DVD drive either! This got me thinking that it might not be the hard drive and some other component that they hdd and the dvd uses. Hopefully this is the case. Which component is the most likely culprit? What tools can I use from Ubuntu Live on my USB flash drive to find out? I'm in a bad place without my hdd, thanks in advance for any assistance provided! P.S. My laptop makes a weird noise when I try to access or eject my DVD within the slot. Also my HDD makes a weird noise sometimes. Not sure how to describe it. System Specs: Dell 1558

    Read the article

  • Why does my drive show as 180GB used, but copies only 40GB?

    - by Manuel
    My computer crashed, so I removed the drive (with Windows XP Professional 32-Bit) and put this drive in another computer running Windows 7 64-bit. Booting with Win7, when going to My Computer it is showing the XP drive as more than 180GB used. So as a quick backup, I'm trying to copy all the disk's content to a folder, but when I start copying, it's showing only 40 GB as the total size of the files to copy. I enabled showing system and hidden files in View options. What could be the problem?

    Read the article

  • How do I know when my on-board ethernet is dead? (Realtek 8112L LAN controller w/ AI NET2 )

    - by Usagi
    So I have an ASUS P7P55D-E Pro motherboard. It has an on-board Realtek 8112L LAN controller w/ AI NET2. I suspect that my LAN controller is dead but I don't really know for sure. This is what I know thus far: Everything was working, I have a triple booted system and ethernet was functional under Linux, Win7, and OSX. My ethernet is no longer functional under all three of the operating systems. I was experiencing random momentary internet outages before everything finally went dark. I don't know much about the AI NET BIOS tool but I believe it just checks for ethernet problems before you boot into an operating system. In any case, it doesn't find a connection upon boot. I've checked the connection on a couple of other machines and everything worked fine. I think I already know the answer to my question, but are there any other possible explanations, or is it dead?

    Read the article

  • Scanner Dayly Duty Cycle

    - by Juanp
    I'm comfused with the concept of 'Daily Duty Cycle'. For example if I have a scanner that the spec is: PPM (pages per minute): 90 and DDC (Daily Duty Cycle): 800. and I am interested in scanning ONLY 10hours continuously, what would it be the best choice: 90 * 60 * 10 = 54.000 or (800 / 24) * 10 = 333 It is very different results. what would it be the best option?

    Read the article

  • Hp pavilion dv7 power button

    - by Danny B
    My power button is non responsive I am getting LED for charging. I've taken it apart before to change the dc jack and it was fine and a few months later it just powered off. I try to power back on and is goes to start up then shuts off. I just took it apart and came to find the ribbon cable connecting the power button/speakers cover is barely hanging on do I have to replace the whole thing or is there a way to replace the ribbon cable?

    Read the article

  • Laptop powering off after 10 mins or so

    - by Jack
    I have no OS installed, and I am trying to use a linux boot disc. However it is not a linux problem....if I just leave the computer on at the no operating system found message, it still turns off. I thought maybe it was overheating, but I am 90% sure that is not the problem. What else could cause this? I should have mentioned, it's a laptop.

    Read the article

  • My monitor made a noise and is now dimmer - can I repair this myself?

    - by Ross
    I have a Samsung SyncMaster T190 LCD monitor which I've had for about 5 years. It hissed slightly then went dim (readable but the top half of the screen is less bright). I'm pretty sure that after 5 years of service it's just got to the point where something's burned out, so my question is can I repair this myself, or should I just get a new monitor. I'm currently a student so self repair would be a better option if cost effective.

    Read the article

  • Is my motherboard failing, or is there some other issue?

    - by ThatGuy
    So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

    Read the article

  • Can I charge USB devices from a powered hub that isn't connected to a PC?

    - by Anodyne
    This will probably sound familiar to most of you... In my home, we have a whole bunch of devices that can be charged via USB (two iPhones, a BlackBerry, an iPod Touch, etc ad nauseam). We also have a bunch of USB chargers, each of which has a single USB port on it. I'd like to have something permanently connected to AC power with at least 4 USB ports on it, so we can just plug devices in and don't need to go looking for a free outlet. So here's the question: if I buy a powered USB hub, will that do the job even if I don't connect it to a PC? Ideally if you have a hub that you can personally verify will be suitable, let me know the manufacturer and model :-) Thanks in advance! EDIT: The solution I eventually went for was this: Kensington 4-Port USB Charger for Mobile Devices (Europe) There's also a US version here: Kensington 4-Port USB Charger for Mobile Devices (USA) It arrived yesterday, so I used it to charge the following devices, all at the same time, overnight last night: 32GB iPhone 3GS 16GB iPhone 3G First-generation iPod Touch Kensington Portable Power Pack for Mobile Devices I can't say anything about the charging speed (as I left it overnight) but all devices were fully charged this morning.

    Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >