Search Results

Search found 25973 results on 1039 pages for 'visual c express 2010'.

Page 951/1039 | < Previous Page | 947 948 949 950 951 952 953 954 955 956 957 958  | Next Page >

  • Form, function and complexity in rule processing

    - by Charles Young
    Tim Bass posted on ‘Orwellian Event Processing’. I was involved in a heated exchange in the comments, and he has more recently published a post entitled ‘Disadvantages of Rule-Based Systems (Part 1)’. Whatever the rights and wrongs of our exchange, it clearly failed to generate any agreement or understanding of our different positions. I don't particularly want to promote further argument of that kind, but I do want to take the opportunity of offering a different perspective on rule-processing and an explanation of my comments. For me, the ‘red rag’ lay in Tim’s claim that “...rules alone are highly inefficient for most classes of (not simple) problems” and a later paragraph that appears to equate the simplicity of form (‘IF-THEN-ELSE’) with simplicity of function.   It is not the first time Tim has expressed these views and not the first time I have responded to his assertions.   Indeed, Tim has a long history of commenting on the subject of complex event processing (CEP) and, less often, rule processing in ‘robust’ terms, often asserting that very many other people’s opinions on this subject are mistaken.   In turn, I am of the opinion that, certainly in terms of rule processing, which is an area in which I have a specific interest and knowledge, he is often mistaken. There is no simple answer to the fundamental question ‘what is a rule?’ We use the word in a very fluid fashion in English. Likewise, the term ‘rule processing’, as used widely in IT, is equally difficult to define simplistically. The best way to envisage the term is as a ‘centre of gravity’ within a wider domain. That domain contains many other ‘centres of gravity’, including CEP, statistical analytics, neural networks, natural language processing and so much more. Whole communities tend to gravitate towards and build themselves around some of these centres. The term 'rule processing' is associated with many different technology types, various software products, different architectural patterns, the functional capability of many applications and services, etc. There is considerable variation amongst these different technologies, techniques and products. Very broadly, a common theme is their ability to manage certain types of processing and problem solving through declarative, or semi-declarative, statements of propositional logic bound to action-based consequences. It is generally important to be able to decouple these statements from other parts of an overall system or architecture so that they can be managed and deployed independently.  As a centre of gravity, ‘rule processing’ is no island. It exists in the context of a domain of discourse that is, itself, highly interconnected and continuous.   Rule processing does not, for example, exist in splendid isolation to natural language processing.   On the contrary, an on-going theme of rule processing is to find better ways to express rules in natural language and map these to executable forms.   Rule processing does not exist in splendid isolation to CEP.   On the contrary, an event processing agent can reasonably be considered as a rule engine (a theme in ‘Power of Events’ by David Luckham).   Rule processing does not live in splendid isolation to statistical approaches such as Bayesian analytics. On the contrary, rule processing and statistical analytics are highly synergistic.   Rule processing does not even live in splendid isolation to neural networks. For example, significant research has centred on finding ways to translate trained nets into explicit rule sets in order to support forms of validation and facilitate insight into the knowledge stored in those nets. What about simplicity of form?   Many rule processing technologies do indeed use a very simple form (‘If...Then’, ‘When...Do’, etc.)   However, it is a fundamental mistake to equate simplicity of form with simplicity of function.   It is absolutely mistaken to suggest that simplicity of form is a barrier to the efficient handling of complexity.   There are countless real-world examples which serve to disprove that notion.   Indeed, simplicity of form is often the key to handling complexity. Does rule processing offer a ‘one size fits all’. No, of course not.   No serious commentator suggests it does.   Does the design and management of large knowledge bases, expressed as rules, become difficult?   Yes, it can do, but that is true of any large knowledge base, regardless of the form in which knowledge is expressed.   The measure of complexity is not a function of rule set size or rule form.  It tends to be correlated more strongly with the size of the ‘problem space’ (‘search space’) which is something quite different.   Analysis of the problem space and the algorithms we use to search through that space are, of course, the very things we use to derive objective measures of the complexity of a given problem. This is basic computer science and common practice. Sailing a Dreadnaught through the sea of information technology and lobbing shells at some of the islands we encounter along the way does no one any good.   Building bridges and causeways between islands so that the inhabitants can collaborate in open discourse offers hope of real progress.

    Read the article

  • Scrum in 5 Minutes

    - by Stephen.Walther
    The goal of this blog entry is to explain the basic concepts of Scrum in less than five minutes. You learn how Scrum can help a team of developers to successfully complete a complex software project. Product Backlog and the Product Owner Imagine that you are part of a team which needs to create a new website – for example, an e-commerce website. You have an overwhelming amount of work to do. You need to build (or possibly buy) a shopping cart, install an SSL certificate, create a product catalog, create a Facebook page, and at least a hundred other things that you have not thought of yet. According to Scrum, the first thing you should do is create a list. Place the highest priority items at the top of the list and the lower priority items lower in the list. For example, creating the shopping cart and buying the domain name might be high priority items and creating a Facebook page might be a lower priority item. In Scrum, this list is called the Product Backlog. How do you prioritize the items in the Product Backlog? Different stakeholders in the project might have different priorities. Gary, your division VP, thinks that it is crucial that the e-commerce site has a mobile app. Sally, your direct manager, thinks taking advantage of new HTML5 features is much more important. Multiple people are pulling you in different directions. According to Scrum, it is important that you always designate one person, and only one person, as the Product Owner. The Product Owner is the person who decides what items should be added to the Product Backlog and the priority of the items in the Product Backlog. The Product Owner could be the customer who is paying the bills, the project manager who is responsible for delivering the project, or a customer representative. The critical point is that the Product Owner must always be a single person and that single person has absolute authority over the Product Backlog. Sprints and the Sprint Backlog So now the developer team has a prioritized list of items and they can start work. The team starts implementing the first item in the Backlog — the shopping cart — and the team is making good progress. Unfortunately, however, half-way through the work of implementing the shopping cart, the Product Owner changes his mind. The Product Owner decides that it is much more important to create the product catalog before the shopping cart. With some frustration, the team switches their developmental efforts to focus on implementing the product catalog. However, part way through completing this work, once again the Product Owner changes his mind about the highest priority item. Getting work done when priorities are constantly shifting is frustrating for the developer team and it results in lower productivity. At the same time, however, the Product Owner needs to have absolute authority over the priority of the items which need to get done. Scrum solves this conflict with the concept of Sprints. In Scrum, a developer team works in Sprints. At the beginning of a Sprint the developers and the Product Owner agree on the items from the backlog which they will complete during the Sprint. This subset of items from the Product Backlog becomes the Sprint Backlog. During the Sprint, the Product Owner is not allowed to change the items in the Sprint Backlog. In other words, the Product Owner cannot shift priorities on the developer team during the Sprint. Different teams use Sprints of different lengths such as one month Sprints, two-week Sprints, and one week Sprints. For high-stress, time critical projects, teams typically choose shorter sprints such as one week sprints. For more mature projects, longer one month sprints might be more appropriate. A team can pick whatever Sprint length makes sense for them just as long as the team is consistent. You should pick a Sprint length and stick with it. Daily Scrum During a Sprint, the developer team needs to have meetings to coordinate their work on completing the items in the Sprint Backlog. For example, the team needs to discuss who is working on what and whether any blocking issues have been discovered. Developers hate meetings (well, sane developers hate meetings). Meetings take developers away from their work of actually implementing stuff as opposed to talking about implementing stuff. However, a developer team which never has meetings and never coordinates their work also has problems. For example, Fred might get stuck on a programming problem for days and never reach out for help even though Tom (who sits in the cubicle next to him) has already solved the very same problem. Or, both Ted and Fred might have started working on the same item from the Sprint Backlog at the same time. In Scrum, these conflicting needs – limiting meetings but enabling team coordination – are resolved with the idea of the Daily Scrum. The Daily Scrum is a meeting for coordinating the work of the developer team which happens once a day. To keep the meeting short, each developer answers only the following three questions: 1. What have you done since yesterday? 2. What do you plan to do today? 3. Any impediments in your way? During the Daily Scrum, developers are not allowed to talk about issues with their cat, do demos of their latest work, or tell heroic stories of programming problems overcome. The meeting must be kept short — typically about 15 minutes. Issues which come up during the Daily Scrum should be discussed in separate meetings which do not involve the whole developer team. Stories and Tasks Items in the Product or Sprint Backlog – such as building a shopping cart or creating a Facebook page – are often referred to as User Stories or Stories. The Stories are created by the Product Owner and should represent some business need. Unlike the Product Owner, the developer team needs to think about how a Story should be implemented. At the beginning of a Sprint, the developer team takes the Stories from the Sprint Backlog and breaks the stories into tasks. For example, the developer team might take the Create a Shopping Cart story and break it into the following tasks: · Enable users to add and remote items from shopping cart · Persist the shopping cart to database between visits · Redirect user to checkout page when Checkout button is clicked During the Daily Scrum, members of the developer team volunteer to complete the tasks required to implement the next Story in the Sprint Backlog. When a developer talks about what he did yesterday or plans to do tomorrow then the developer should be referring to a task. Stories are owned by the Product Owner and a story is all about business value. In contrast, the tasks are owned by the developer team and a task is all about implementation details. A story might take several days or weeks to complete. A task is something which a developer can complete in less than a day. Some teams get lazy about breaking stories into tasks. Neglecting to break stories into tasks can lead to “Never Ending Stories” If you don’t break a story into tasks, then you can’t know how much of a story has actually been completed because you don’t have a clear idea about the implementation steps required to complete the story. Scrumboard During the Daily Scrum, the developer team uses a Scrumboard to coordinate their work. A Scrumboard contains a list of the stories for the current Sprint, the tasks associated with each Story, and the state of each task. The developer team uses the Scrumboard so everyone on the team can see, at a glance, what everyone is working on. As a developer works on a task, the task moves from state to state and the state of the task is updated on the Scrumboard. Common task states are ToDo, In Progress, and Done. Some teams include additional task states such as Needs Review or Needs Testing. Some teams use a physical Scrumboard. In that case, you use index cards to represent the stories and the tasks and you tack the index cards onto a physical board. Using a physical Scrumboard has several disadvantages. A physical Scrumboard does not work well with a distributed team – for example, it is hard to share the same physical Scrumboard between Boston and Seattle. Also, generating reports from a physical Scrumboard is more difficult than generating reports from an online Scrumboard. Estimating Stories and Tasks Stakeholders in a project, the people investing in a project, need to have an idea of how a project is progressing and when the project will be completed. For example, if you are investing in creating an e-commerce site, you need to know when the site can be launched. It is not enough to just say that “the project will be done when it is done” because the stakeholders almost certainly have a limited budget to devote to the project. The people investing in the project cannot determine the business value of the project unless they can have an estimate of how long it will take to complete the project. Developers hate to give estimates. The reason that developers hate to give estimates is that the estimates are almost always completely made up. For example, you really don’t know how long it takes to build a shopping cart until you finish building a shopping cart, and at that point, the estimate is no longer useful. The problem is that writing code is much more like Finding a Cure for Cancer than Building a Brick Wall. Building a brick wall is very straightforward. After you learn how to add one brick to a wall, you understand everything that is involved in adding a brick to a wall. There is no additional research required and no surprises. If, on the other hand, I assembled a team of scientists and asked them to find a cure for cancer, and estimate exactly how long it will take, they would have no idea. The problem is that there are too many unknowns. I don’t know how to cure cancer, I need to do a lot of research here, so I cannot even begin to estimate how long it will take. So developers hate to provide estimates, but the Product Owner and other product stakeholders, have a legitimate need for estimates. Scrum resolves this conflict by using the idea of Story Points. Different teams use different units to represent Story Points. For example, some teams use shirt sizes such as Small, Medium, Large, and X-Large. Some teams prefer to use Coffee Cup sizes such as Tall, Short, and Grande. Finally, some teams like to use numbers from the Fibonacci series. These alternative units are converted into a Story Point value. Regardless of the type of unit which you use to represent Story Points, the goal is the same. Instead of attempting to estimate a Story in hours (which is doomed to failure), you use a much less fine-grained measure of work. A developer team is much more likely to be able to estimate that a Story is Small or X-Large than the exact number of hours required to complete the story. So you can think of Story Points as a compromise between the needs of the Product Owner and the developer team. When a Sprint starts, the developer team devotes more time to thinking about the Stories in a Sprint and the developer team breaks the Stories into Tasks. In Scrum, you estimate the work required to complete a Story by using Story Points and you estimate the work required to complete a task by using hours. The difference between Stories and Tasks is that you don’t create a task until you are just about ready to start working on a task. A task is something that you should be able to create within a day, so you have a much better chance of providing an accurate estimate of the work required to complete a task than a story. Burndown Charts In Scrum, you use Burndown charts to represent the remaining work on a project. You use Release Burndown charts to represent the overall remaining work for a project and you use Sprint Burndown charts to represent the overall remaining work for a particular Sprint. You create a Release Burndown chart by calculating the remaining number of uncompleted Story Points for the entire Product Backlog every day. The vertical axis represents Story Points and the horizontal axis represents time. A Sprint Burndown chart is similar to a Release Burndown chart, but it focuses on the remaining work for a particular Sprint. There are two different types of Sprint Burndown charts. You can either represent the remaining work in a Sprint with Story Points or with task hours (the following image, taken from Wikipedia, uses hours). When each Product Backlog Story is completed, the Release Burndown chart slopes down. When each Story or task is completed, the Sprint Burndown chart slopes down. Burndown charts typically do not always slope down over time. As new work is added to the Product Backlog, the Release Burndown chart slopes up. If new tasks are discovered during a Sprint, the Sprint Burndown chart will also slope up. The purpose of a Burndown chart is to give you a way to track team progress over time. If, halfway through a Sprint, the Sprint Burndown chart is still climbing a hill then you know that you are in trouble. Team Velocity Stakeholders in a project always want more work done faster. For example, the Product Owner for the e-commerce site wants the website to launch before tomorrow. Developers tend to be overly optimistic. Rarely do developers acknowledge the physical limitations of reality. So Project stakeholders and the developer team often collude to delude themselves about how much work can be done and how quickly. Too many software projects begin in a state of optimism and end in frustration as deadlines zoom by. In Scrum, this problem is overcome by calculating a number called the Team Velocity. The Team Velocity is a measure of the average number of Story Points which a team has completed in previous Sprints. Knowing the Team Velocity is important during the Sprint Planning meeting when the Product Owner and the developer team work together to determine the number of stories which can be completed in the next Sprint. If you know the Team Velocity then you can avoid committing to do more work than the team has been able to accomplish in the past, and your team is much more likely to complete all of the work required for the next Sprint. Scrum Master There are three roles in Scrum: the Product Owner, the developer team, and the Scrum Master. I’v e already discussed the Product Owner. The Product Owner is the one and only person who maintains the Product Backlog and prioritizes the stories. I’ve also described the role of the developer team. The members of the developer team do the work of implementing the stories by breaking the stories into tasks. The final role, which I have not discussed, is the role of the Scrum Master. The Scrum Master is responsible for ensuring that the team is following the Scrum process. For example, the Scrum Master is responsible for making sure that there is a Daily Scrum meeting and that everyone answers the standard three questions. The Scrum Master is also responsible for removing (non-technical) impediments which the team might encounter. For example, if the team cannot start work until everyone installs the latest version of Microsoft Visual Studio then the Scrum Master has the responsibility of working with management to get the latest version of Visual Studio as quickly as possible. The Scrum Master can be a member of the developer team. Furthermore, different people can take on the role of the Scrum Master over time. The Scrum Master, however, cannot be the same person as the Product Owner. Using SonicAgile SonicAgile (SonicAgile.com) is an online tool which you can use to manage your projects using Scrum. You can use the SonicAgile Product Backlog to create a prioritized list of stories. You can estimate the size of the Stories using different Story Point units such as Shirt Sizes and Coffee Cup sizes. You can use SonicAgile during the Sprint Planning meeting to select the Stories that you want to complete during a particular Sprint. You can configure Sprints to be any length of time. SonicAgile calculates Team Velocity automatically and displays a warning when you add too many stories to a Sprint. In other words, it warns you when it thinks you are overcommitting in a Sprint. SonicAgile also includes a Scrumboard which displays the list of Stories selected for a Sprint and the tasks associated with each story. You can drag tasks from one task state to another. Finally, SonicAgile enables you to generate Release Burndown and Sprint Burndown charts. You can use these charts to view the progress of your team. To learn more about SonicAgile, visit SonicAgile.com. Summary In this post, I described many of the basic concepts of Scrum. You learned how a Product Owner uses a Product Backlog to create a prioritized list of tasks. I explained why work is completed in Sprints so the developer team can be more productive. I also explained how a developer team uses the daily scrum to coordinate their work. You learned how the developer team uses a Scrumboard to see, at a glance, who is working on what and the state of each task. I also discussed Burndown charts. You learned how you can use both Release and Sprint Burndown charts to track team progress in completing a project. Finally, I described the crucial role of the Scrum Master – the person who is responsible for ensuring that the rules of Scrum are being followed. My goal was not to describe all of the concepts of Scrum. This post was intended to be an introductory overview. For a comprehensive explanation of Scrum, I recommend reading Ken Schwaber’s book Agile Project Management with Scrum: http://www.amazon.com/Agile-Project-Management-Microsoft-Professional/dp/073561993X/ref=la_B001H6ODMC_1_1?ie=UTF8&qid=1345224000&sr=1-1

    Read the article

  • Windows Azure Root CAs and SSL Client Certificates

    - by Your DisplayName here!
    I ran into some problems while trying to make SSL client certificates work for StarterSTS 1.5. In theory you have to do two things (via startup tasks): Unlock the SSL section in IIS Install all the root certificates for the client certs you want to accept I did that. But it still does not work. While inspecting the event log, I stumbled over an schannel error message that I’ve never seen before: “When asking for client authentication, this server sends a list of trusted certificate authorities to the client. The client uses this list to choose a client certificate that is trusted by the server. Currently, this server trusts so many certificate authorities that the list has grown too long. This list has thus been truncated. The administrator of this machine should review the certificate authorities trusted for client authentication and remove those that do not really need to be trusted.” WTF? And indeed standard Azure (web role) VMs trust 275 root CAs (see attached list). Including kinda obscure ones. I don’t really know why MS made this design decision. It seems just wrong (including breaking the SSL client cert functionality). Deleting like 60% of them made SSL client certs from my CA work. So I guess I now have to find an automated way to attach CTLs to my site…joy. Exported list of trusted CA (as of 30th Dec 2010) AC Raíz Certicámara S.A. (4/2/2030 9:42:02 PM) AC RAIZ FNMT-RCM (1/1/2030 12:00:00 AM) A-CERT ADVANCED (10/23/2011 2:14:14 PM) Actalis Authentication CA G1 (6/25/2022 2:06:00 PM) Agence Nationale de Certification Electronique (8/12/2037 9:03:17 AM) Agence Nationale de Certification Electronique (8/12/2037 9:58:14 AM) Agencia Catalana de Certificacio (NIF Q-0801176-I) (1/7/2031 10:59:59 PM) America Online Root Certification Authority 1 (11/19/2037 8:43:00 PM) America Online Root Certification Authority 2 (9/29/2037 2:08:00 PM) ANCERT Certificados CGN (2/11/2024 5:27:12 PM) ANCERT Certificados Notariales (2/11/2024 3:58:26 PM) ANCERT Corporaciones de Derecho Publico (2/11/2024 5:22:45 PM) A-Trust-nQual-01 (11/30/2014 11:00:00 PM) A-Trust-nQual-03 (8/17/2015 10:00:00 PM) A-Trust-Qual-01 (11/30/2014 11:00:00 PM) A-Trust-Qual-02 (12/2/2014 11:00:00 PM) A-Trust-Qual-03a (4/24/2018 10:00:00 PM) Austria Telekom-Control Kommission (9/24/2005 12:40:00 PM) Austrian Society for Data Protection (2/12/2009 11:30:30 AM) Austrian Society for Data Protection GLOBALTRUST Certification Service (9/18/2036 2:12:35 PM) Autoridad Certificadora Raiz de la Secretaria de Economia (5/9/2025 12:00:00 AM) Autoridad de Certificacion de la Abogacia (6/13/2030 10:00:00 PM) Autoridad de Certificacion Firmaprofesional CIF A62634068 (10/24/2013 10:00:00 PM) Autoridade Certificadora Raiz Brasileira (11/30/2011 11:59:00 PM) Baltimore CyberTrust Root (5/12/2025 11:59:00 PM) BIT AdminCA-CD-T01 (1/25/2016 12:36:19 PM) BIT Admin-Root-CA (11/10/2021 7:51:07 AM) Buypass Class 2 CA 1 (10/13/2016 10:25:09 AM) Buypass Class 3 CA 1 (5/9/2015 2:13:03 PM) CA Disig (3/22/2016 1:39:34 AM) CertEurope (3/27/2037 11:00:00 PM) CERTICAMARA S.A. (2/23/2015 5:10:37 PM) Certicámara S.A. (5/23/2011 10:00:00 PM) Certigna (6/29/2027 3:13:05 PM) Certipost E-Trust Primary Normalised CA (7/26/2020 10:00:00 AM) Certipost E-Trust Primary Qualified CA (7/26/2020 10:00:00 AM) Certipost E-Trust Primary TOP Root CA (7/26/2025 10:00:00 AM) Certisign Autoridade Certificadora AC1S (6/27/2018 12:00:00 AM) Certisign Autoridade Certificadora AC2 (6/27/2018 12:00:00 AM) Certisign Autoridade Certificadora AC3S (7/9/2018 8:56:32 PM) Certisign Autoridade Certificadora AC4 (6/27/2018 12:00:00 AM) CertPlus Class 1 Primary CA (7/6/2020 11:59:59 PM) CertPlus Class 2 Primary CA (7/6/2019 11:59:59 PM) CertPlus Class 3 Primary CA (7/6/2019 11:59:59 PM) CertPlus Class 3P Primary CA (7/6/2019 11:59:59 PM) CertPlus Class 3TS Primary CA (7/6/2019 11:59:59 PM) CertRSA01 (3/3/2010 2:59:59 PM) certSIGN Root CA (7/4/2031 5:20:04 PM) Certum (6/11/2027 10:46:39 AM) Certum Trusted Network CA (12/31/2029 12:07:37 PM) Chambers of Commerce Root - 2008 (7/31/2038 12:29:50 PM) Chambersign Chambers of Commerce Root (9/30/2037 4:13:44 PM) Chambersign Global Root (9/30/2037 4:14:18 PM) Chambersign Public Notary Root (9/30/2037 4:14:49 PM) Chunghwa Telecom Co. Ltd. (12/20/2034 2:31:27 AM) Cisco Systems (5/14/2029 8:25:42 PM) CNNIC Root (4/16/2027 7:09:14 AM) Common Policy (10/15/2027 4:08:00 PM) COMODO (12/31/2028 11:59:59 PM) COMODO (1/18/2038 11:59:59 PM) COMODO (12/31/2029 11:59:59 PM) ComSign Advanced Security CA (3/24/2029 9:55:55 PM) ComSign CA (3/19/2029 3:02:18 PM) ComSign Secured CA (3/16/2029 3:04:56 PM) Correo Uruguayo - Root CA (12/31/2030 2:59:59 AM) Cybertrust Global Root (12/15/2021 8:00:00 AM) DanID (2/11/2037 9:09:30 AM) DanID (4/5/2021 5:03:17 PM) Deutsche Telekom Root CA 2 (7/9/2019 11:59:00 PM) DigiCert (11/10/2031 12:00:00 AM) DigiCert (11/10/2031 12:00:00 AM) DigiCert (11/10/2031 12:00:00 AM) DigiNotar Root CA (3/31/2025 6:19:21 PM) DIRECCION GENERAL DE LA POLICIA (2/8/2036 10:59:59 PM) DST (ABA.ECOM) CA (7/9/2009 5:33:53 PM) DST (ANX Network) CA (12/9/2018 4:16:48 PM) DST (Baltimore EZ) CA (7/3/2009 7:56:53 PM) DST (National Retail Federation) RootCA (12/8/2008 4:14:16 PM) DST (United Parcel Service) RootCA (12/7/2008 12:25:46 AM) DST ACES CA X6 (11/20/2017 9:19:58 PM) DST Root CA X3 (9/30/2021 2:01:15 PM) DST RootCA X1 (11/28/2008 6:18:55 PM) DST RootCA X2 (11/27/2008 10:46:16 PM) DSTCA E1 (12/10/2018 6:40:23 PM) DSTCA E2 (12/9/2018 7:47:26 PM) DST-Entrust GTI CA (12/9/2018 12:32:24 AM) D-TRUST GmbH (5/16/2022 5:20:47 AM) D-TRUST GmbH (6/8/2012 11:47:46 AM) D-TRUST GmbH (5/16/2022 5:20:47 AM) EBG Elektronik Sertifika Hizmet Saglayicisi (8/14/2016 12:31:09 AM) E-Certchile (9/5/2028 7:39:41 PM) Echoworx Root CA2 (10/7/2030 10:49:13 AM) ECRaizEstado (6/23/2030 1:41:27 PM) EDICOM (4/13/2028 4:24:22 PM) E-GÜVEN Elektronik Sertifika Hizmet Saglayicisi (1/4/2017 11:32:48 AM) E-ME SSI (RCA) (5/19/2027 8:48:15 AM) Entrust (11/27/2026 8:53:42 PM) Entrust (5/25/2019 4:39:40 PM) Entrust.net (12/7/2030 5:55:54 PM) Equifax Secure eBusiness CA-1 (6/21/2020 4:00:00 AM) Equifax Secure eBusiness CA-2 (6/23/2019 12:14:45 PM) Equifax Secure Global eBusiness CA-1 (6/21/2020 4:00:00 AM) eSign Australia: eSign Imperito Primary Root CA (5/23/2012 11:59:59 PM) eSign Australia: Gatekeeper Root CA (5/23/2014 11:59:59 PM) eSign Australia: Primary Utility Root CA (5/23/2012 11:59:59 PM) Fabrica Nacional de Moneda y Timbre (3/18/2019 3:26:19 PM) GeoTrust (8/22/2018 4:41:51 PM) GeoTrust (7/16/2036 11:59:59 PM) GeoTrust Global CA (5/21/2022 4:00:00 AM) GeoTrust Global CA 2 (3/4/2019 5:00:00 AM) GeoTrust Primary Certification Authority - G2 (1/18/2038 11:59:59 PM) GeoTrust Primary Certification Authority - G3 (12/1/2037 11:59:59 PM) GeoTrust Universal CA (3/4/2029 5:00:00 AM) GeoTrust Universal CA 2 (3/4/2029 5:00:00 AM) Global Chambersign Root - 2008 (7/31/2038 12:31:40 PM) GlobalSign (1/28/2028 12:00:00 PM) GlobalSign (12/15/2021 8:00:00 AM) Go Daddy Class 2 Certification Authority (6/29/2034 5:06:20 PM) GTE CyberTrust Global Root (8/13/2018 11:59:00 PM) GTE CyberTrust Root (4/3/2004 11:59:00 PM) GTE CyberTrust Root (2/23/2006 11:59:00 PM) Halcom CA FO (6/5/2020 10:33:31 AM) Halcom CA PO 2 (2/7/2019 6:33:31 PM) Hongkong Post Root CA (1/16/2010 11:59:00 PM) Hongkong Post Root CA 1 (5/15/2023 4:52:29 AM) I.CA První certifikacní autorita a.s. (4/1/2018 12:00:00 AM) I.CA První certifikacní autorita a.s. (4/1/2018 12:00:00 AM) InfoNotary (3/6/2026 5:33:05 PM) IPS SERVIDORES (12/29/2009 11:21:07 PM) IZENPE S.A. (1/30/2018 11:00:00 PM) Izenpe.com (12/13/2037 8:27:25 AM) Japan Certification Services, Inc. SecureSign RootCA1 (9/15/2020 2:59:59 PM) Japan Certification Services, Inc. SecureSign RootCA11 (4/8/2029 4:56:47 AM) Japan Certification Services, Inc. SecureSign RootCA2 (9/15/2020 2:59:59 PM) Japan Certification Services, Inc. SecureSign RootCA3 (9/15/2020 2:59:59 PM) Japan Local Government PKI Application CA (3/31/2016 2:59:59 PM) Japanese Government ApplicationCA (12/12/2017 3:00:00 PM) Juur-SK AS Sertifitseerimiskeskus (8/26/2016 2:23:01 PM) KamuSM (8/21/2017 11:37:07 AM) KISA RootCA 1 (8/24/2025 8:05:46 AM) KISA RootCA 3 (11/19/2014 6:39:51 AM) Macao Post eSignTrust (1/29/2013 11:59:59 PM) MicroSec e-Szigno Root CA (4/6/2017 12:28:44 PM) Microsoft Authenticode(tm) Root (12/31/1999 11:59:59 PM) Microsoft Root Authority (12/31/2020 7:00:00 AM) Microsoft Root Certificate Authority (5/9/2021 11:28:13 PM) Microsoft Timestamp Root (12/30/1999 11:59:59 PM) MOGAHA Govt of Korea (4/21/2012 9:07:23 AM) MOGAHA Govt of Korea GPKI (3/15/2017 6:00:04 AM) NetLock Arany (Class Gold) Fotanúsítvány (12/6/2028 3:08:21 PM) NetLock Expressz (Class C) Tanusitvanykiado (2/20/2019 2:08:11 PM) NetLock Kozjegyzoi (Class A) Tanusitvanykiado (2/19/2019 11:14:47 PM) NetLock Minositett Kozjegyzoi (Class QA) Tanusitvanykiado (12/15/2022 1:47:11 AM) NetLock Platina (Class Platinum) Fotanúsítvány (12/6/2028 3:12:44 PM) NetLock Uzleti (Class B) Tanusitvanykiado (2/20/2019 2:10:22 PM) Netrust CA1 (3/30/2021 2:57:45 AM) Network Solutions (12/31/2029 11:59:59 PM) NLB Nova Ljubljanska Banka d.d. Ljubljana (5/15/2023 12:22:45 PM) OISTE WISeKey Global Root GA CA (12/11/2037 4:09:51 PM) Post.Trust Root CA (7/5/2022 9:12:33 AM) Post.Trust Root CA (8/20/2010 1:56:21 PM) Posta CA Root (10/20/2028 12:52:08 PM) POSTarCA (2/7/2023 11:06:58 AM) QuoVadis Root CA 2 (11/24/2031 6:23:33 PM) QuoVadis Root CA 3 (11/24/2031 7:06:44 PM) QuoVadis Root Certification Authority (3/17/2021 6:33:33 PM) Root CA Generalitat Valenciana (7/1/2021 3:22:47 PM) RSA Security 2048 V3 (2/22/2026 8:39:23 PM) SECOM Trust Systems CO LTD (6/6/2037 2:12:32 AM) SECOM Trust Systems CO LTD (6/25/2019 10:23:48 PM) SECOM Trust Systems CO LTD (9/30/2023 4:20:49 AM) Secretaria de Economia Mexico (5/8/2025 12:00:00 AM) Secrétariat Général de la Défense Nationale (10/17/2020 2:29:22 PM) SecureNet CA Class B (10/16/2009 9:59:00 AM) Serasa Certificate Authority I (11/21/2024 2:12:45 PM) Serasa Certificate Authority II (11/21/2024 12:44:48 PM) Serasa Certificate Authority III (11/21/2024 1:24:14 PM) SERVICIOS DE CERTIFICACION - A.N.C. (3/9/2009 9:08:07 PM) Sigen-CA (6/29/2021 9:57:46 PM) Sigov-CA (1/10/2021 2:22:52 PM) Skaitmeninio sertifikavimo centras (12/28/2026 12:05:04 PM) Skaitmeninio sertifikavimo centras (12/25/2026 12:08:26 PM) Skaitmeninio sertifikavimo centras (12/22/2026 12:11:30 PM) Sonera Class1 CA (4/6/2021 10:49:13 AM) Sonera Class2 CA (4/6/2021 7:29:40 AM) Spanish Property & Commerce Registry CA (4/27/2012 9:39:50 AM) Staat der Nederlanden Root CA (12/16/2015 9:15:38 AM) Staat der Nederlanden Root CA - G2 (3/25/2020 11:03:10 AM) Starfield Class 2 Certification Authority (6/29/2034 5:39:16 PM) Starfield Technologies (6/26/2019 12:19:54 AM) Starfield Technologies Inc. (12/31/2029 11:59:59 PM) StartCom Certification Authority (9/17/2036 7:46:36 PM) S-TRUST Authentication and Encryption Root CA 2005:PN (6/21/2030 11:59:59 PM) Swisscom Root CA 1 (8/18/2025 10:06:20 PM) SwissSign (10/25/2036 8:30:35 AM) SwissSign Platinum G2 Root CA (10/25/2036 8:36:00 AM) SwissSign Silver G2 Root CA (10/25/2036 8:32:46 AM) TC TrustCenter Class 1 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 2 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 2 CA II (12/31/2025 10:59:59 PM) TC TrustCenter Class 3 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 3 CA II (12/31/2025 10:59:59 PM) TC TrustCenter Class 4 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 4 CA II (12/31/2025 10:59:59 PM) TC TrustCenter Time Stamping CA (1/1/2011 11:59:59 AM) TC TrustCenter Universal CA I (12/31/2025 10:59:59 PM) TC TrustCenter Universal CA II (12/31/2030 10:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (7/16/2036 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte Primary Root CA - G2 (1/18/2038 11:59:59 PM) thawte Primary Root CA - G3 (12/1/2037 11:59:59 PM) Thawte Timestamping CA (12/31/2020 11:59:59 PM) Trustis EVS Root CA (1/9/2027 11:56:00 AM) Trustis FPS Root CA (1/21/2024 11:36:54 AM) Trustwave (1/1/2035 5:37:19 AM) Trustwave (12/31/2029 7:40:55 PM) Trustwave (12/31/2029 7:52:06 PM) TURKTRUST Elektronik Islem Hizmetleri (9/16/2015 12:13:05 PM) TURKTRUST Elektronik Islem Hizmetleri (3/22/2015 10:04:51 AM) TURKTRUST Elektronik Sertifika Hizmet Saglayicisi (9/16/2015 10:07:57 AM) TURKTRUST Elektronik Sertifika Hizmet Saglayicisi (3/22/2015 10:27:17 AM) TÜRKTRUST Elektronik Sertifika Hizmet Saglayicisi (12/22/2017 6:37:19 PM) TW Government Root Certification Authority (12/5/2032 1:23:33 PM) TWCA Root Certification Authority 1 (12/31/2030 3:59:59 PM) TWCA Root Certification Authority 2 (12/31/2030 3:59:59 PM) U.S. Government FBCA (10/6/2010 6:53:56 PM) UCA Global Root (12/31/2037 12:00:00 AM) UCA Root (12/31/2029 12:00:00 AM) USERTrust (7/9/2019 6:40:36 PM) USERTrust (7/9/2019 5:36:58 PM) USERTrust (6/24/2019 7:06:30 PM) USERTrust (7/9/2019 6:19:22 PM) USERTrust (5/30/2020 10:48:38 AM) UTN - USERFirst-Network Applications (7/9/2019 6:57:49 PM) ValiCert Class 3 Policy Validation Authority (6/26/2019 12:22:33 AM) VAS Latvijas Pasts SSI(RCA) (9/13/2024 9:27:57 AM) VeriSign (5/18/2018 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (12/31/1999 9:37:48 AM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (5/18/2018 11:59:59 PM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (1/7/2020 11:59:59 PM) VeriSign (12/31/1999 9:35:58 AM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (1/7/2010 11:59:59 PM) VeriSign (5/18/2018 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (5/18/2018 11:59:59 PM) VeriSign Class 3 Public Primary CA (8/1/2028 11:59:59 PM) VeriSign Class 3 Public Primary Certification Authority - G4 (1/18/2038 11:59:59 PM) VeriSign Time Stamping CA (1/7/2004 11:59:59 PM) VeriSign Universal Root Certification Authority (12/1/2037 11:59:59 PM) Visa eCommerce Root (6/24/2022 12:16:12 AM) Visa Information Delivery Root CA (6/29/2025 5:42:42 PM) VRK Gov. Root CA (12/18/2023 1:51:08 PM) Wells Fargo Root Certificate Authority (1/14/2021 4:41:28 PM) WellsSecure Public Certificate Authority (12/14/2022 12:07:54 AM) Xcert EZ by DST (7/11/2009 4:14:18 PM)

    Read the article

  • Rounded Corners and Shadows &ndash; Dialogs with CSS

    - by Rick Strahl
    Well, it looks like we’ve finally arrived at a place where at least all of the latest versions of main stream browsers support rounded corners and box shadows. The two CSS properties that make this possible are box-shadow and box-radius. Both of these CSS Properties now supported in all the major browsers as shown in this chart from QuirksMode: In it’s simplest form you can use box-shadow and border radius like this: .boxshadow { -moz-box-shadow: 3px 3px 5px #535353; -webkit-box-shadow: 3px 3px 5px #535353; box-shadow: 3px 3px 5px #535353; } .roundbox { -moz-border-radius: 6px 6px 6px 6px; -webkit-border-radius: 6px; border-radius: 6px 6px 6px 6px; } box-shadow: horizontal-shadow-pixels vertical-shadow-pixels blur-distance shadow-color box-shadow attributes specify the the horizontal and vertical offset of the shadow, the blur distance (to give the shadow a smooth soft look) and a shadow color. The spec also supports multiple shadows separated by commas using the attributes above but we’re not using that functionality here. box-radius: top-left-radius top-right-radius bottom-right-radius bottom-left-radius border-radius takes a pixel size for the radius for each corner going clockwise. CSS 3 also specifies each of the individual corner elements such as border-top-left-radius, but support for these is much less prevalent so I would recommend not using them for now until support improves. Instead use the single box-radius to specify all corners. Browser specific Support in older Browsers Notice that there are two variations: The actual CSS 3 properties (box-shadow and box-radius) and the browser specific ones (-moz, –webkit prefixes for FireFox and Chrome/Safari respectively) which work in slightly older versions of modern browsers before official CSS 3 support was added. The goal is to spread support as widely as possible and the prefix versions extend the range slightly more to those browsers that provided early support for these features. Notice that box-shadow and border-radius are used after the browser specific versions to ensure that the latter versions get precedence if the browser supports both (last assignment wins). Use the .boxshadow and .roundbox Styles in HTML To use these two styles create a simple rounded box with a shadow you can use HTML like this: <!-- Simple Box with rounded corners and shadow --> <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="boxcontenttext"> Simple Rounded Corner Box. </div> </div> which looks like this in the browser: This works across browsers and it’s pretty sweet and simple. Watch out for nested Elements! There are a couple of things to be aware of however when using rounded corners. Specifically, you need to be careful when you nest other non-transparent content into the rounded box. For example check out what happens when I change the inside <div> to have a colored background: <!-- Simple Box with rounded corners and shadow --> <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="boxcontenttext" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> which renders like this:   If you look closely you’ll find that the inside <div>’s corners are not rounded and so ‘poke out’ slightly over the rounded corners. It looks like the rounded corners are ‘broken’ up instead of a solid rounded line around the corner, which his pretty ugly. The bigger the radius the more drastic this effect becomes . To fix this issue the inner <div> also has have rounded corners at the same or slightly smaller radius than the outer <div>. The simple fix for this is to simply also apply the roundbox style to the inner <div> in addition to the boxcontenttext style already applied: <div class="boxcontenttext roundbox" style="background: khaki;"> The fixed display now looks proper: Separate Top and Bottom Elements This gets even a little more tricky if you have an element at the top or bottom only of the rounded box. What if you need to add something like a header or footer <div> that have non-transparent backgrounds which is a pretty common scenario? In those cases you want only the top or bottom corners rounded and not both. To make this work a couple of additional styles to round only the top and bottom corners can be created: .roundbox-top { -moz-border-radius: 4px 4px 0 0; -webkit-border-radius: 4px 4px 0 0; border-radius: 4px 4px 0 0; } .roundbox-bottom { -moz-border-radius: 0 0 4px 4px; -webkit-border-radius: 0 0 4px 4px; border-radius: 0 0 4px 4px; } Notice that radius used for the ‘inside’ rounding is smaller (4px) than the outside radius (6px). This is so the inner radius fills into the outer border – if you use the same size you may have some white space showing between inner and out rounded corners. Experiment with values to see what works – in my experimenting the behavior across browsers here is consistent (thankfully). These styles can be applied in addition to other styles to make only the top or bottom portions of an element rounded. For example imagine I have styles like this: .gridheader, .gridheaderbig, .gridheaderleft, .gridheaderright { padding: 4px 4px 4px 4px; background: #003399 url(images/vertgradient.png) repeat-x; text-align: center; font-weight: bold; text-decoration: none; color: khaki; } .gridheaderleft { text-align: left; } .gridheaderright { text-align: right; } .gridheaderbig { font-size: 135%; } If I just apply say gridheader by itself in HTML like this: <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="gridheaderleft">Box with a Header</div> <div class="boxcontenttext" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> This results in a pretty funky display – again due to the fact that the inner elements render square rather than rounded corners: If you look close again you can see that both the header and the main content have square edges which jumps out at the eye. To fix this you can now apply the roundbox-top and roundbox-bottom to the header and content respectively: <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="gridheaderleft roundbox-top">Box with a Header</div> <div class="boxcontenttext roundbox-bottom" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> Which now gives the proper display with rounded corners both on the top and bottom: All of this is sweet to be supported – at least by the newest browser – without having to resort to images and nasty JavaScripts solutions. While this is still not a mainstream feature yet for the majority of actually installed browsers, the majority of browser users are very likely to have this support as most browsers other than IE are actively pushing users to upgrade to newer versions. Since this is a ‘visual display only feature it degrades reasonably well in non-supporting browsers: You get an uninteresting square and non-shadowed browser box, but the display is still overall functional. The main sticking point – as always is Internet Explorer versions 8.0 and down as well as older versions of other browsers. With those browsers you get a functional view that is a little less interesting to look at obviously: but at least it’s still functional. Maybe that’s just one more incentive for people using older browsers to upgrade to a  more modern browser :-) Creating Dialog Related Styles In a lot of my AJAX based applications I use pop up windows which effectively work like dialogs. Using the simple CSS behaviors above, it’s really easy to create some fairly nice looking overlaid windows with nothing but CSS. Here’s what a typical ‘dialog’ I use looks like: The beauty of this is that it’s plain CSS – no plug-ins or images (other than the gradients which are optional) required. Add jQuery-ui draggable (or ww.jquery.js as shown below) and you have a nice simple inline implementation of a dialog represented by a simple <div> tag. Here’s the HTML for this dialog: <div id="divDialog" class="dialog boxshadow" style="width: 450px;"> <div class="dialog-header"> <div class="closebox"></div> User Sign-in </div> <div class="dialog-content"> <label>Username:</label> <input type="text" name="txtUsername" value=" " /> <label>Password</label> <input type="text" name="txtPassword" value=" " /> <hr /> <input type="button" id="btnLogin" value="Login" /> </div> <div class="dialog-statusbar">Ready</div> </div> Most of this behavior is driven by the ‘dialog’ styles which are fairly basic and easy to understand. They do use a few support images for the gradients which are provided in the sample I’ve provided. Here’s what the CSS looks like: .dialog { background: White; overflow: hidden; border: solid 1px steelblue; -moz-border-radius: 6px 6px 4px 4px; -webkit-border-radius: 6px 6px 4px 4px; border-radius: 6px 6px 3px 3px; } .dialog-header { background-image: url(images/dialogheader.png); background-repeat: repeat-x; text-align: left; color: cornsilk; padding: 5px; padding-left: 10px; font-size: 1.02em; font-weight: bold; position: relative; -moz-border-radius: 4px 4px 0px 0px; -webkit-border-radius: 4px 4px 0px 0px; border-radius: 4px 4px 0px 0px; } .dialog-top { -moz-border-radius: 4px 4px 0px 0px; -webkit-border-radius: 4px 4px 0px 0px; border-radius: 4px 4px 0px 0px; } .dialog-bottom { -moz-border-radius: 0 0 3px 3px; -webkit-border-radius: 0 0 3px 3px; border-radius: 0 0 3px 3px; } .dialog-content { padding: 15px; } .dialog-statusbar, .dialog-toolbar { background: #eeeeee; background-image: url(images/dialogstrip.png); background-repeat: repeat-x; padding: 5px; padding-left: 10px; border-top: solid 1px silver; border-bottom: solid 1px silver; font-size: 0.8em; } .dialog-statusbar { -moz-border-radius: 0 0 3px 3px; -webkit-border-radius: 0 0 3px 3px; border-radius: 0 0 3px 3px; padding-right: 10px; } .closebox { position: absolute; right: 2px; top: 2px; background-image: url(images/close.gif); background-repeat: no-repeat; width: 14px; height: 14px; cursor: pointer; opacity: 0.60; filter: alpha(opacity="80"); } .closebox:hover { opacity: 1; filter: alpha(opacity="100"); } The main style is the dialog class which is the outer box. It has the rounded border that serves as the outline. Note that I didn’t add the box-shadow to this style because in some situations I just want the rounded box in an inline display that doesn’t have a shadow so it’s still applied separately. dialog-header, then has the rounded top corners and displays a typical dialog heading format. dialog-bottom and dialog-top then provide the same functionality as roundbox-top and roundbox-bottom described earlier but are provided mainly in the stylesheet for consistency to match the dialog’s round edges and making it easier to  remember and find in Intellisense as it shows up in the same dialog- group. dialog-statusbar and dialog-toolbar are two elements I use a lot for floating windows – the toolbar serves for buttons and options and filters typically, while the status bar provides information specific to the floating window. Since the the status bar is always on the bottom of the dialog it automatically handles the rounding of the bottom corners. Finally there’s  closebox style which is to be applied to an empty <div> tag in the header typically. What this does is render a close image that is by default low-lighted with a low opacity value, and then highlights when hovered over. All you’d have to do handle the close operation is handle the onclick of the <div>. Note that the <div> right aligns so typically you should specify it before any other content in the header. Speaking of closable – some time ago I created a closable jQuery plug-in that basically automates this process and can be applied against ANY element in a page, automatically removing or closing the element with some simple script code. Using this you can leave out the <div> tag for closable and just do the following: To make the above dialog closable (and draggable) which makes it effectively and overlay window, you’d add jQuery.js and ww.jquery.js to the page: <script type="text/javascript" src="../../scripts/jquery.min.js"></script> <script type="text/javascript" src="../../scripts/ww.jquery.min.js"></script> and then simply call: <script type="text/javascript"> $(document).ready(function () { $("#divDialog") .draggable({ handle: ".dialog-header" }) .closable({ handle: ".dialog-header", closeHandler: function () { alert("Window about to be closed."); return true; // true closes - false leaves open } }); }); </script> * ww.jquery.js emulates base features in jQuery-ui’s draggable. If jQuery-ui is loaded its draggable version will be used instead and voila you have now have a draggable and closable window – here in mid-drag:   The dragging and closable behaviors are of course optional, but it’s the final touch that provides dialog like window behavior. Relief for older Internet Explorer Versions with CSS Pie If you want to get these features to work with older versions of Internet Explorer all the way back to version 6 you can check out CSS Pie. CSS Pie provides an Internet Explorer behavior file that attaches to specific CSS rules and simulates these behavior using script code in IE (mostly by implementing filters). You can simply add the behavior to each CSS style that uses box-shadow and border-radius like this: .boxshadow {     -moz-box-shadow: 3px 3px 5px #535353;     -webkit-box-shadow: 3px 3px 5px #535353;           box-shadow: 3px 3px 5px #535353;     behavior: url(scripts/PIE.htc);           } .roundbox {      -moz-border-radius: 6px 6px 6px 6px;     -webkit-border-radius: 6px;      border-radius: 6px 6px 6px 6px;     behavior: url(scripts/PIE.htc); } CSS Pie requires the PIE.htc on your server and referenced from each CSS style that needs it. Note that the url() for IE behaviors is NOT CSS file relative as other CSS resources, but rather PAGE relative , so if you have more than one folder you probably need to reference the HTC file with a fixed path like this: behavior: url(/MyApp/scripts/PIE.htc); in the style. Small price to pay, but a royal pain if you have a common CSS file you use in many applications. Once the PIE.htc file has been copied and you have applied the behavior to each style that uses these new features Internet Explorer will render rounded corners and box shadows! Yay! Hurray for box-shadow and border-radius All of this functionality is very welcome natively in the browser. If you think this is all frivolous visual candy, you might be right :-), but if you take a look on the Web and search for rounded corner solutions that predate these CSS attributes you’ll find a boatload of stuff from image files, to custom drawn content to Javascript solutions that play tricks with a few images. It’s sooooo much easier to have this functionality built in and I for one am glad to see that’s it’s finally becoming standard in the box. Still remember that when you use these new CSS features, they are not universal, and are not going to be really soon. Legacy browsers, especially old versions of Internet Explorer that can’t be updated will continue to be around and won’t work with this shiny new stuff. I say screw ‘em: Let them get a decent recent browser or see a degraded and ugly UI. We have the luxury with this functionality in that it doesn’t typically affect usability – it just doesn’t look as nice. Resources Download the Sample The sample includes the styles and images and sample page as well as ww.jquery.js for the draggable/closable example. Online Sample Check out the sample described in this post online. Closable and Draggable Documentation Documentation for the closeable and draggable plug-ins in ww.jquery.js. You can also check out the full documentation for all the plug-ins contained in ww.jquery.js here. © Rick Strahl, West Wind Technologies, 2005-2011Posted in HTML  CSS  

    Read the article

  • Data Profiling without SSIS

    Strangely enough for a predominantly SSIS blog, this post is all about how to perform data profiling without using SSIS. Whilst the Data Profiling Task is a worthy addition, there are a couple of limitations I’ve encountered of late. The first is that it requires SQL Server 2008, and not everyone is there yet. The second is that it can only target SQL Server 2005 and above. What about older systems, which are the ones that we probably need to investigate the most, or other vendor databases such as Oracle? With these limitations in mind I did some searching to find a quick and easy alternative to help me perform some data profiling for a project I was working on recently. I only had SQL Server 2005 available, and anyway most of my target source systems were Oracle, and of course I had short timescales. I looked at several options. Some never got beyond the download stage, they failed to install or just did not run, and others provided less than I could have produced myself by spending 2 minutes writing some basic SQL queries. In the end I settled on an open source product called DataCleaner. To quote from their website: DataCleaner is an Open Source application for profiling, validating and comparing data. These activities help you administer and monitor your data quality in order to ensure that your data is useful and applicable to your business situation. DataCleaner is the free alternative to software for master data management (MDM) methodologies, data warehousing (DW) projects, statistical research, preparation for extract-transform-load (ETL) activities and more. DataCleaner is developed in Java and licensed under LGPL. As quoted above it claims to support profiling, validating and comparing data, but I didn’t really get past the profiling functions, so won’t comment on the other two. The profiling whilst not prefect certainly saved some time compared to the limited alternatives. The ability to profile heterogeneous data sources is a big advantage over the SSIS option, and I found it overall quite easy to use and performance was good. I could see it struggling at times, but actually for what it does I was impressed. It had some data type niggles with Oracle, and some metrics seem a little strange, although thankfully they were easy to augment with some SQL queries to ensure a consistent picture. The report export options didn’t do it for me, but copy and paste with a bit of Excel magic was sufficient. One initial point for me personally is that I have had limited exposure to things of the Java persuasion and whilst I normally get by fine, sometimes the simplest things can throw me. For example installing a JDBC driver, why do I have to copy files to make it all work, has nobody ever heard of an MSI? In case there are other people out there like me who have become totally indoctrinated with the Microsoft software paradigm, I’ve written a quick start guide that details every step required. Steps 1- 5 are the key ones, the rest is really an excuse for some screenshots to show you the tool. Quick Start Guide Step 1  - Download Data Cleaner. The Microsoft Windows zipped exe option, and I chose the latest stable build, currently DataCleaner 1.5.3 (final). Extract the files to a suitable location. Step 2 - Download Java. If you try and run datacleaner.exe without Java it will warn you, and then open your default browser and take you to the Java download site. Follow the installation instructions from there, normally just click Download Java a couple of times and you’re done. Step 3 - Download Microsoft SQL Server JDBC Driver. You may have SQL Server installed, but you won’t have a JDBC driver. Version 3.0 is the latest as of April 2010. There is no real installer, we are in the Java world here, but run the exe you downloaded to extract the files. The default Unzip to folder is not much help, so try a fully qualified path such as C:\Program Files\Microsoft SQL Server JDBC Driver 3.0\ to ensure you can find the files afterwards. Step 4 - If you wish to use Windows Authentication to connect to your SQL Server then first we need to copy a file so that Data Cleaner can find it. Browse to the JDBC extract location from Step 3 and drill down to the file sqljdbc_auth.dll. You will have to choose the correct directory for your processor architecture. e.g. C:\Program Files\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\auth\x86\sqljdbc_auth.dll. Now copy this file to the Data Cleaner extract folder you chose in Step 1. An alternative method is to edit datacleaner.cmd in the data cleaner extract folder as detailed in this data cleaner wiki topic, but I find copying the file simpler. Step 5 – Now lets run Data Cleaner, just run datacleaner.exe from the extract folder you chose in Step 1. Step 6 – Complete or skip the registration screen, and ignore the task window for now. In the main window click settings. Step 7 – In the Settings dialog, select the Database drivers tab, then click Register database driver and select the Local JAR file option. Step 8 – Browse to the JDBC driver extract location from Step 3 and drill down to select sqljdbc4.jar. e.g. C:\Program Files\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\sqljdbc4.jar Step 9 – Select the Database driver class as com.microsoft.sqlserver.jdbc.SQLServerDriver, and then click the Test and Save database driver button. Step 10 - You should be back at the Settings dialog with a the list of drivers that includes SQL Server. Just click Save Settings to persist all your hard work. Step 11 – Now we can start to profile some data. In the main Data Cleaner window click New Task, and then Profile from the task window. Step 12 – In the Profile window click Open Database Step 13 – Now choose the SQL Server connection string option. Selecting a connection string gives us a template like jdbc:sqlserver://<hostname>:1433;databaseName=<database>, but obviously it requires some details to be entered for example  jdbc:sqlserver://localhost:1433;databaseName=SQLBits. This will connect to the database called SQLBits on my local machine. The port may also have to be changed if using such as when you have a multiple instances of SQL Server running. If using SQL Server Authentication enter a username and password as required and then click Connect to database. You can use Window Authentication, just add integratedSecurity=true to the end of your connection string. e.g jdbc:sqlserver://localhost:1433;databaseName=SQLBits;integratedSecurity=true.  If you didn’t complete Step 4 above you will need to do so now and restart Data Cleaner before it will work. Manually setting the connection string is fine, but creating a named connection makes more sense if you will be spending any length of time profiling a specific database. As highlighted in the left-hand screen-shot, at the bottom of the dialog it includes partial instructions on how to create named connections. In the folder shown C:\Users\<Username>\.datacleaner\1.5.3, open the datacleaner-config.xml file in your editor of choice add your own details. You’ll see a sample connection in the file already, just add yours following the same pattern. e.g. <!-- Darren's Named Connections --> <bean class="dk.eobjects.datacleaner.gui.model.NamedConnection"> <property name="name" value="SQLBits Local Connection" /> <property name="driverClass" value="com.microsoft.sqlserver.jdbc.SQLServerDriver" /> <property name="connectionString" value="jdbc:sqlserver://localhost:1433;databaseName=SQLBits;integratedSecurity=true" /> <property name="tableTypes"> <list> <value>TABLE</value> <value>VIEW</value> </list> </property> </bean> Step 14 – Once back at the Profile window, you should now see your schemas, tables and/or views listed down the left hand side. Browse this tree and double-click a table to select it for profiling. You can then click Add profile, and choose some profiling options, before finally clicking Run profiling. You can see below a sample output for three of the most common profiles, click the image for full size.   I hope this has given you a taster for DataCleaner, and should help you get up and running pretty quickly.

    Read the article

  • Introducing… SharePress!

    - by Bil Simser
    For those that follow me I’ve been away from blogging and twittering for a couple of months. This is the reason. For the last few months I’ve been working with a cross-functional team putting together a new product from the people that run WordPress, the free premiere blogging platform. The result is a new product we call SharePress, a highly extensible blogging and content management platform with the usability of WordPress and the power of SharePoint combined into a single product. SharePress gives you SharePoint sites that are SEO-friendly delivered with a Web 2.0 ease of use, leveraging all of the existing abilities of SharePoint and WordPress that we know today. The Reason Back in December I was approached by the WordPress team about building a new platform that took advantage of the power of SharePoint but the ease of WordPress. I’m no stranger to WordPress and it’s 5 minute no-holds-barred install (I’ve always wanted SharePoint to do this!) and I run my personal blog on WordPress as does my better half, Princess Jenn. There’s always been a pitch by so-called Web 2.0 applications to deliver the power of SharePoint but the ease of [insert product here] over the past year or so. I checked each and every one of them out, but they fell woefully short when it came to SharePoint’s document management, versioning, and customization. They try, but it’s never been up to par in my books. On the flipside, SharePoint has always been tops in collaboration in the Enterprise but it’s painful to develop web parts, UI customization can be tricky, and there’s just no user community for something as simple as themes and designs. The Product Enter SharePress. Is it SharePoint? Is it WordPress? It’s both, and neither. Everything you like about both products are there but this is a bold new product that is positioned to bring SharePoint to the masses while maintaining the fidelity of an Enterprise 2.0 collaboration platform. SharePress delivers on all fronts including: The ability to leverage any WordPress/Joomla/Drupal/DotNetNuke themes and skins inside of SharePoint Run any WordPress/Drupal/Joomla/DotNetNuke/SharePoint plug-in/module/web part/feature works out of the box with SharePress SEO-friendly URLs and pages Permalinks for all content All the features of SharePoint Server 2010 (including InfoPath, Excel, and Access services) included in the price Small deployment footprint. You decide how much to deploy and where. Independent Database Abstraction Layer (iDal) that allows you to deploy to SQL Server 2005/2008, MySQL, and PostgreSQL Portable Rendering Engine Layer (PREL) so you host .NET or PHP on Apache or IIS (version 7 or higher). The install feature is built around WordPress and it’s famous 5-minute install (actually, it’s never taken me more than 1 minute). SharePress installs with two screens after the files are uploaded to your server (which can be done entirely using FTP): After you enter two fields of information click “Install SharePress” and you’ll be done: No mess, no fuss, no complicated dependencies, and no server access required! How simpler could this be? The Technology WordPress plug-ins and themes working with SharePoint? Of course! The answer is IronPython which has now reached a maturity level capable of doing on the fly code language conversions. SharePress is a brand new product not built on top of any previous platform but leverages all the power of each of those applications through a patent pending technique called SharePress Multi-plAtfoRm Technology (SMART). SMART will convert PHP code on the fly into Python (using SWIG as an intermediate processor) which is then compiled to MSIL and then delivered back as an ASP.NET MVC application (output is C# or VB.NET, but you can build your own SMART converter to output a different language). Sound complicated? It is, but it’s all behind the scenes and you don’t have to worry about a thing. This image illustrates the technology stack and process: So users can load up out of the box PHP themes and plug-ins from the WordPress/Joomla/Drupal community into the SMART converter and output MSIL that is used by the SharePress engine and rendered on the fly to the end user. Supported PHP versions are 4.xx and 5.xx with version 6 support to come when it’s released. Similarly you can take any .NET application, DotNetNuke Module, SharePoint Web Part or event handler and feed it into the converter to output the same. Everything is reverse compiled into MSIL so it becomes technology agnostic. No source code access is needed and the SMART converter can handle obfuscated .NET assemblies that were built with .NET 1.0, 1.1, 2.0, 3.5, and 4.0. With this technology you can also with the flip of a switch have the output create PHP pages for you. This allows you to run SharePress on Unix based systems running PHP and MySQL, allowing you to deliver your SharePoint like experience to your users with a $0 infrastructure footprint. Here’s SharePress with the default WordPress post imported then a stock SharePoint collaboration site was imported. The site was then applied with the default Kubrick theme from WordPress. The Features Deploy any of the freely available 100,000 WordPress/Joomla/Drupal themes instantly to your runtime SharePress environment and preview or activate them right from your browser. Built-in Web 2.0 jQuery Enabled End User and Administrator Web Interface. Never have to remote into a server again! Run any SharePoint Web Part or Event Handler directly without modification or access to source code in SharePress. Use any WordPress/Joomla/Drupal plug-in directly in SharePress, no local admin or access to server. Just upload and activate. Upload and Activate any SharePoint Solution Package to any site remotely. No rebuilding. Changes made to sites require no compiling or rebuilding and are published immediately. Password Protected Content. You can give passwords to individual posts, articles, pages, documents, forms, and list items. A powerful polymorphic Captcha system backs the security interface and vendors can easily tie into smart card readers, fingerprint readers, and retina scanners for authorization and identification. OpenID, Windows Live, and Windows Authentication are supported out of the box. Infinitely customizable and extensible. You can leverage plug-ins from the open source community to do practically anything, all configured and uploaded via the browser. Additionally the developer API (available soon) allows you to build extensions in .NET, PHP, and Python with little effort. Easy Importing. We have importers for Blogger, WordPress, Drupal, Joomla, DotNetNuke, and SharePoint so you can populate your site quickly and easily with full metadata modeling and creation. Banner Management. It’s easy to setup banners for your web site complete with impression numbers, special URLs, and more. Menu Manager. The Menu Manager allows you to create as many menus as you want, each one can be associated to specific audiences or roles and then be styled across multiple contexts including the same menu delivered as a fly out, rollover, drop down, and just about any navigation you can think of. Collaborative ShareBook. Our exclusive book feature allows you to setup a “book” and then authorize individuals to contribute content. Permalinks. All content in SharePress has a permanent or “perma link” associated with it so people can link to it freely without fear of broken links. Apache or IIS, Unix / Linux / BSD / Solaris / Windows / Mac OS X support. Deliver SharePress the way *you* want from the platform *you* decide. Database Independence. We know people wanted to run on any database platform so SharePress is built on top of a database abstraction layer that allows you to run on SQL Server, MySQL, PostgreSQL. Other databases can be supported by writing a supporting database script consisting of fourteen function calls. The script can be written in Perl, Python, AWK, PowerShell, Unix Shell scripts, VBA, or simple DOS batch files. The Team SharePress is the work of a lot of people in both the WordPress and SharePoint community. I worked with a lot of SharePoint MVPs to create this new product as we really wanted to deliver the most compatible and feature rich system in a product that we would be proud of. Many thanks go out to Eli Bleeker, Todd Robillard, Scot Larson, Daniel Hillier, Shane Fox, Box Peran, Amanda English, and Bill Murray for doing the heavy lifting and all of their expertise and innovative thinking to get this product out. Licensing and Pricing SharePress is still in the final stages for pricing but we’re looking at a price point somewhere between $99-$100 to make it affordable for everyone. We plan to announce final pricing sometime in the next few weeks. There are no additional charges for Enterprise versions or additional features. Everything you see is what’s available and it’s just a matter of lighting up your site with whatever feature you want to enable. The product will not be open source but source code licenses will be available to ISVs who are interested in interfacing with the API at a low level. Cost will be $25,000 USD per developer and gives you complete access to the source code to the SharePress Foundation System and the .NET 4.0 Framework source code. Conclusion We hope you enjoy the launch of SharePress as the new premium blogging and content management platform for both Intranets and the Internet. We think we’ve build the best of breed solutions here and made it easy for anyone to get started with a minimal of infrastructure but allow the scalability of SharePress to shine through in the Enterprise 2.0 world. We encourage your feedback so please leave comments as to what you’re looking for in this system as we’re always evolving it to make it a better product for everyone.

    Read the article

  • A whole site for reviewing of SQL Server MVP Deep Dives

    - by Rob Farley
    This book just keeps amazing me. Not only as I read through some chapters for the first time, and others for the second and third times, but also as I read reviews of it written by other people. The guys over at http://sqlperspectives.wordpress.com are a prime example. They’ve been going through each chapter, each writing a review on it, and often getting a guest blogger to write something as well – and they’re clearly getting a lot of stuff out of this brilliant book. Back when I first heard about them doing this, I had offered to be involved, and recently did an interview with them about my chapters (chapter seven and chapter forty). That interview can be found at http://sqlperspectives.wordpress.com/2010/03/20/interview-with-rob-farley/ – and covers how I got into databases, and how I think the database roles in the IT industry are changing. If you don’t have a copy of SQL Server MVP Deep Dives yet, why not get a copy from http://www.sqlservermvpdeepdives.com (or persuade your local bookstore to get some copies in), and read through chapters with these guys? Treat it like a book club, discussing each chapter with others (guest blogging perhaps?), and you’ll probably end up getting even more out of it. Remember that the proceeds of the book go to charity (instead of the authors – we get nothing), so you don’t need to consider that you’re splashing out on a treat for yourself. Think of the kids helped by War Child instead. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • What Every Developer Should Know About MSI Components

    - by Alois Kraus
    Hopefully nothing. But if you have to do more than simple XCopy deployment and you need to support updates, upgrades and perhaps side by side scenarios there is no way around MSI. You can create Msi files with a Visual Studio Setup project which is severely limited or you can use the Windows Installer Toolset. I cannot talk about WIX with my German colleagues because WIX has a very special meaning. It is funny to always use the long name when I talk about deployment possibilities. Alternatively you can buy commercial tools which help you to author Msi files but I am not sure how good they are. Given enough pain with existing solutions you can also learn the MSI Apis and create your own packaging solution. If I were you I would use either a commercial visual tool when you do easy deployments or use the free Windows Installer Toolset. Once you know the WIX schema you can create well formed wix xml files easily with any editor. Then you can “compile” from the wxs files your Msi package. Recently I had the “pleasure” to get my hands dirty with C++ (again) and the MSI technology. Installation is a complex topic but after several month of digging into arcane MSI issues I can safely say that there should exist an easier way to install and update files as today. I am not alone with this statement as John Robbins (creator of the cool tool Paraffin) states: “.. It's a brittle and scary API in Windows …”. To help other people struggling with installation issues I present you the advice I (and others) found useful and what will happen if you ignore this advice. What is a MSI file? A MSI file is basically a database with tables which reference each other to control how your un/installation should work. The basic idea is that you declare via these tables what you want to install and MSI controls the how to get your stuff onto or off your machine. Your “stuff” consists usually of files, registry keys, shortcuts and environment variables. Therefore the most important tables are File, Registry, Environment and Shortcut table which define what will be un/installed. The key to master MSI is that every resource (file, registry key ,…) is associated with a MSI component. The actual payload consists of compressed files in the CAB format which can either be embedded into the MSI file or reside beside the MSI file or in a subdirectory below it. To examine MSI files you need Orca a free MSI editor provided by MS. There is also another free editor called Super Orca which does support diffs between MSI and it does not lock the MSI files. But since Orca comes with a shell extension I tend to use only Orca because it is so easy to right click on a MSI file and open it with this tool. How Do I Install It? Double click it. This does work for fresh installations as well as major upgrades. Updates need to be installed via the command line via msiexec /i <msi> REINSTALL=ALL REINSTALLMODE=vomus   This tells the installer to reinstall all already installed features (new features will NOT be installed). The reinstallmode letters do force an overwrite of the old cached package in the %WINDIR%\Installer folder. All files, shortcuts and registry keys are redeployed if they are missing or need to be replaced with a newer version. When things did go really wrong and you want to overwrite everything unconditionally use REINSTALLMODE=vamus. How To Enable MSI Logs? You can download a MSI from Microsoft which installs some registry keys to enable full MSI logging. The log files can be found in your %TEMP% folder and are called MSIxxxx.log. Alternatively you can add to your msiexec command line the option msiexec …. /l*vx <LogFileName> Personally I find it rather strange that * does not mean full logging. To really get all logs I need to add v and x which is documented in the msiexec help but I still find this behavior unintuitive. What are MSI components? The whole MSI logic is bound to the concept of MSI components. Nearly every msi table has a Component column which binds an installable resource to a component. Below are the screenshots of the FeatureComponents and Component table of an example MSI. The Feature table defines basically the feature hierarchy.  To find out what belongs to a feature you need to look at the FeatureComponents table where for each feature the components are listed which will be installed when a feature is installed. The MSI components are defined in the  Component table. This table has as first column the component name and as second column the component id which is a GUID. All resources you want to install belong to a MSI component. Therefore nearly all MSI tables have a Component_ column which contains the component name. If you look e.g. a the File table you see that every file belongs to a component which is true for all other tables which install resources. The component table is the glue between all other tables which contain the resources you want to install. So far so easy. Why is MSI then so complex? Most MSI problems arise from the fact that you did violate a MSI component rule in one or the other way. When you install a feature the reference count for all components belonging to this feature will increase by one. If your component is installed by more than one feature it will get a higher refcount. When you uninstall a feature its refcount will drop by one. Interesting things happen if the component reference count reaches zero: Then all associated resources will be deleted. That looks like a reasonable thing and it is. What it makes complex are the strange component rules you have to follow. Below are some important component rules from the Tao of the Windows Installer … Rule 16: Follow Component Rules Components are a very important part of the Installer technology. They are the means whereby the Installer manages the resources that make up your application. The SDK provides the following guidelines for creating components in your package: Never create two components that install a resource under the same name and target location. If a resource must be duplicated in multiple components, change its name or target location in each component. This rule should be applied across applications, products, product versions, and companies. Two components must not have the same key path file. This is a consequence of the previous rule. The key path value points to a particular file or folder belonging to the component that the installer uses to detect the component. If two components had the same key path file, the installer would be unable to distinguish which component is installed. Two components however may share a key path folder. Do not create a version of a component that is incompatible with all previous versions of the component. This rule should be applied across applications, products, product versions, and companies. Do not create components containing resources that will need to be installed into more than one directory on the user’s system. The installer installs all of the resources in a component into the same directory. It is not possible to install some resources into subdirectories. Do not include more than one COM server per component. If a component contains a COM server, this must be the key path for the component. Do not specify more than one file per component as a target for the Start menu or a Desktop shortcut. … And these rules do not even talk about component ids, update packages and upgrades which you need to understand as well. Lets suppose you install two MSIs (MSI1 and MSI2) which have the same ComponentId but different component names. Both do install the same file. What will happen when you uninstall MSI2?   Hm the file should stay there. But the component names are different. Yes and yes. But MSI uses not use the component name as key for the refcount. Instead the ComponentId column of the Component table which contains a GUID is used as identifier under which the refcount is stored. The components Comp1 and Comp2 are identical from the MSI perspective. After the installation of both MSIs the Component with the Id {100000….} has a refcount of two. After uninstallation of one MSI there is still a refcount of one which drops to zero just as expected when we uninstall the last msi. Then the file which was the same for both MSIs is deleted. You should remember that MSI keeps a refcount across MSIs for components with the same component id. MSI does manage components not the resources you did install. The resources associated with a component are then and only then deleted when the refcount of the component reaches zero.   The dependencies between features, components and resources can be described as relations. m,k are numbers >= 1, n can be 0. Inside a MSI the following relations are valid Feature    1  –> n Components Component    1 –> m Features Component      1  –>  k Resources These relations express that one feature can install several components and features can share components between them. Every (meaningful) component will install at least one resource which means that its name (primary key to stay in database speak) does occur in some other table in the Component column as value which installs some resource. Lets make it clear with an example. We want to install with the feature MainFeature some files a registry key and a shortcut. We can then create components Comp1..3 which are referenced by the resources defined in the corresponding tables.   Feature Component Registry File Shortcuts MainFeature Comp1 RegistryKey1     MainFeature Comp2   File.txt   MainFeature Comp3   File2.txt Shortcut to File2.txt   It is illegal that the same resource is part of more than one component since this would break the refcount mechanism. Lets illustrate this:            Feature ComponentId Resource Reference Count Feature1 {1000-…} File1.txt 1 Feature2 {2000-….} File1.txt 1 The installation part works well but what happens when you uninstall Feature2? Component {20000…} gets a refcount of zero where MSI deletes all resources belonging to this component. In this case File1.txt will be deleted. But Feature1 still has another component {10000…} with a refcount of one which means that the file was deleted too early. You just have ruined your installation. To fix it you then need to click on the Repair button under Add/Remove Programs to let MSI reinstall any missing registry keys, files or shortcuts. The vigilant reader might has noticed that there is more in the Component table. Beside its name and GUID it has also an installation directory, attributes and a KeyPath. The KeyPath is a reference to a file or registry key which is used to detect if the component is already installed. This becomes important when you repair or uninstall a component. To find out if the component is already installed MSI checks if the registry key or file referenced by the KeyPath property does exist. When it does not exist it assumes that it was either already uninstalled (can lead to problems during uninstall) or that it is already installed and all is fine. Why is this detail so important? Lets put all files into one component. The KeyPath should be then one of the files of your component to check if it was installed or not. When your installation becomes corrupt because a file was deleted you cannot repair it with the Repair button under Add/Remove Programs because MSI checks the component integrity via the Resource referenced by its KeyPath. As long as you did not delete the KeyPath file MSI thinks all resources with your component are installed and never executes any repair action. You get even more trouble when you try to remove files during an upgrade (you cannot remove files during an update) from your super component which contains all files. The only way out and therefore best practice is to assign for every resource you want to install an extra component. This ensures painless updatability and repairs and you have much less effort to remove specific files during an upgrade. In effect you get this best practice relation Feature 1  –> n Components Component   1  –>  1 Resources MSI Component Rules Rule 1 – One component per resource Every resource you want to install (file, registry key, value, environment value, shortcut, directory, …) must get its own component which does never change between versions as long as the install location is the same. Penalty If you add more than one resources to a component you will break the repair capability of MSI because the KeyPath is used to check if the component needs repair. MSI ComponentId Files MSI 1.0 {1000} File1-5 MSI 2.0 {2000} File2-5 You want to remove File1 in version 2.0 of your MSI. Since you want to keep the other files you create a new component and add them there. MSI will delete all files if the component refcount of {1000} drops to zero. The files you want to keep are added to the new component {2000}. Ok that does work if your upgrade does uninstall the old MSI first. This will cause the refcount of all previously installed components to reach zero which means that all files present in version 1.0 are deleted. But there is a faster way to perform your upgrade by first installing your new MSI and then remove the old one.  If you choose this upgrade path then you will loose File1-5 after your upgrade and not only File1 as intended by your new component design.   Rule 2 – Only add, never remove resources from a component If you did follow rule 1 you will not need Rule 2. You can add in a patch more resources to one component. That is ok. But you can never remove anything from it. There are tricky ways around that but I do not want to encourage bad component design. Penalty Lets assume you have 2 MSI files which install under the same component one file   MSI1 MSI2 {1000} - ComponentId {1000} – ComponentId File1.txt File2.txt   When you install and uninstall both MSIs you will end up with an installation where either File1 or File2 will be left. Why? It seems that MSI does not store the resources associated with each component in its internal database. Instead Windows will simply query the MSI that is currently uninstalled for all resources belonging to this component. Since it will find only one file and not two it will only uninstall one file. That is the main reason why you never can remove resources from a component!   Rule 3 Never Remove A Component From an Update MSI. This is the same as if you change the GUID of a component by accident for your new update package. The resulting update package will not contain all components from the previously installed package. Penalty When you remove a component from a feature MSI will set the feature state during update to Advertised and log a warning message into its log file when you did enable MSI logging. SELMGR: ComponentId '{2DCEA1BA-3E27-E222-484C-D0D66AEA4F62}' is registered to feature 'xxxxxxx, but is not present in the Component table.  Removal of components from a feature is not supported! MSI (c) (24:44) [07:53:13:436]: SELMGR: Removal of a component from a feature is not supported Advertised means that MSI treats all components of this feature as not installed. As a consequence during uninstall nothing will be removed since it is not installed! This is not only bad because uninstall does no longer work but this feature will also not get the required patches. All other features which have followed component versioning rules for update packages will be updated but the one faulty feature will not. This results in very hard to find bugs why an update was only partially successful. Things got better with Windows Installer 4.5 but you cannot rely on that nobody will use an older installer. It is a good idea to add to your update msiexec call MSIENFORCEUPGRADECOMPONENTRULES=1 which will abort the installation if you did violate this rule.

    Read the article

  • SQLAuthority News – Guest Post – FAULT Contract in WCF with Learning Video

    - by pinaldave
    This is guest post by one of my very good friends and .NET MVP, Dhananjay Kumar. The very first impression one gets when they meet him is his politeness. He is an extremely nice person, but has superlative knowledge in .NET and is truly helpful to all of us. Objective: This article will give a basic introduction on: How to handle Exception at service side? How to use Fault contract at Service side? How to handle Service Exception at client side? A Few Points about Exception at Service Exception is technology-specific. Exception should not be shared beyond service boundary. Since Exception is technology-specific, it cannot be propagated to other clients. Exception is of many types. CLR Exception Windows32 Exception Runtime Exception at service C++ Exception Exception is very much native to the technology in which service is made. Exception must be converted from technology-specific information to natural information that can be communicated to the client. SOAP Fault FaultException<T> Service should throw FaultException<T>, instead of the usual CLR exception. FaultException<T> is a specialization of Fault Exception. Any client that programs against FaultException can handle the Exception thrown by FaultException<T>. The type parameter T conveys the error detail. T can be of any type like Exception, CLR Type or any type that can be serialized. T can be of type Data contract. T is a generic parameter that conveys the error details. You can read complete article http://dhananjaykumar.net/2010/05/23/fault-contract-in-wcf-with-learning-video/ Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • ASP.NET Web Forms Extensibility: Providers

    - by Ricardo Peres
    Introduction This will be the first of a number of posts on ASP.NET extensibility. At this moment I don’t know exactly how many will be and I only know a couple of subjects that I want to talk about, so more will come in the next days. I have the sensation that the providers offered by ASP.NET are not widely know, although everyone uses, for example, sessions, they may not be aware of the extensibility points that Microsoft included. This post won’t go into details of how to configure and extend each of the providers, but will hopefully give some pointers on that direction. Canonical These are the most widely known and used providers, coming from ASP.NET 1, chances are, you have used them already. Good support for invoking client side, either from a .NET application or from JavaScript. Lots of server-side controls use them, such as the Login control for example. Membership The Membership provider is responsible for managing registered users, including creating new ones, authenticating them, changing passwords, etc. ASP.NET comes with two implementations, one that uses a SQL Server database and another that uses the Active Directory. The base class is Membership and new providers are registered on the membership section on the Web.config file, as well as parameters for specifying minimum password lengths, complexities, maximum age, etc. One reason for creating a custom provider would be, for example, storing membership information in a different database engine. 1: <membership defaultProvider="MyProvider"> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly"/> 4: </providers> 5: </membership> Role The Role provider assigns roles to authenticated users. The base class is Role and there are three out of the box implementations: XML-based, SQL Server and Windows-based. Also registered on Web.config through the roleManager section, where you can also say if your roles should be cached on a cookie. If you want your roles to come from a different place, implement a custom provider. 1: <roleManager defaultProvider="MyProvider"> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly" /> 4: </providers> 5: </roleManager> Profile The Profile provider allows defining a set of properties that will be tied and made available to authenticated or even anonymous ones, which must be tracked by using anonymous authentication. The base class is Profile and the only included implementation stores these settings in a SQL Server database. Configured through profile section, where you also specify the properties to make available, a custom provider would allow storing these properties in different locations. 1: <profile defaultProvider="MyProvider"> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly"/> 4: </providers> 5: </profile> Basic OK, I didn’t know what to call these, so Basic is probably as good as a name as anything else. Not supported client-side (doesn’t even make sense). Session The Session provider allows storing data tied to the current “session”, which is normally created when a user first accesses the site, even when it is not yet authenticated, and remains all the way. The base class and only included implementation is SessionStateStoreProviderBase and it is capable of storing data in one of three locations: In the process memory (default, not suitable for web farms or increased reliability); A SQL Server database (best for reliability and clustering); The ASP.NET State Service, which is a Windows Service that is installed with the .NET Framework (ok for clustering). The configuration is made through the sessionState section. By adding a custom Session provider, you can store the data in different locations – think for example of a distributed cache. 1: <sessionState customProvider=”MyProvider”> 2: <providers> 3: <add name=”MyProvider” type=”MyClass, MyAssembly” /> 4: </providers> 5: </sessionState> Resource A not so known provider, allows you to change the origin of localized resource elements. By default, these come from RESX files and are used whenever you use the Resources expression builder or the GetGlobalResourceObject and GetLocalResourceObject methods, but if you implement a custom provider, you can have these elements come from some place else, such as a database. The base class is ResourceProviderFactory and there’s only one internal implementation which uses these RESX files. Configuration is through the globalization section. 1: <globalization resourceProviderFactoryType="MyClass, MyAssembly" /> Health Monitoring Health Monitoring is also probably not so well known, and actually not a good name for it. First, in order to understand what it does, you have to know that ASP.NET fires “events” at specific times and when specific things happen, such as when logging in, an exception is raised. These are not user interface events and you can create your own and fire them, nothing will happen, but the Health Monitoring provider will detect it. You can configure it to do things when certain conditions are met, such as a number of events being fired in a certain amount of time. You define these rules and route them to a specific provider, which must inherit from WebEventProvider. Out of the box implementations include sending mails, logging to a SQL Server database, writing to the Windows Event Log, Windows Management Instrumentation, the IIS 7 Trace infrastructure or the debugger Trace. Its configuration is achieved by the healthMonitoring section and a reason for implementing a custom provider would be, for example, locking down a web application in the event of a significant number of failed login attempts occurring in a small period of time. 1: <healthMonitoring> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly"/> 4: </providers> 5: </healthMonitoring> Sitemap The Sitemap provider allows defining the site’s navigation structure and associated required permissions for each node, in a tree-like fashion. Usually this is statically defined, and the included provider allows it, by supplying this structure in a Web.sitemap XML file. The base class is SiteMapProvider and you can extend it in order to supply you own source for the site’s structure, which may even be dynamic. Its configuration must be done through the siteMap section. 1: <siteMap defaultProvider="MyProvider"> 2: <providers><add name="MyProvider" type="MyClass, MyAssembly" /> 3: </providers> 4: </siteMap> Web Part Personalization Web Parts are better known by SharePoint users, but since ASP.NET 2.0 they are included in the core Framework. Web Parts are server-side controls that offer certain possibilities of configuration by clients visiting the page where they are located. The infrastructure handles this configuration per user or globally for all users and this provider is responsible for just that. The base class is PersonalizationProvider and the only included implementation stores settings on SQL Server. Add new providers through the personalization section. 1: <webParts> 2: <personalization defaultProvider="MyProvider"> 3: <providers> 4: <add name="MyProvider" type="MyClass, MyAssembly"/> 5: </providers> 6: </personalization> 7: </webParts> Build The Build provider is responsible for compiling whatever files are present on your web folder. There’s a base class, BuildProvider, and, as can be expected, internal implementations for building pages (ASPX), master pages (Master), user web controls (ASCX), handlers (ASHX), themes (Skin), XML Schemas (XSD), web services (ASMX, SVC), resources (RESX), browser capabilities files (Browser) and so on. You would write a build provider if you wanted to generate code from any kind of non-code file so that you have strong typing at development time. Configuration goes on the buildProviders section and it is per extension. 1: <buildProviders> 2: <add extension=".ext" type="MyClass, MyAssembly” /> 3: </buildProviders> New in ASP.NET 4 Not exactly new since they exist since 2010, but in ASP.NET terms, still new. Output Cache The Output Cache for ASPX pages and ASCX user controls is now extensible, through the Output Cache provider, which means you can implement a custom mechanism for storing and retrieving cached data, for example, in a distributed fashion. The base class is OutputCacheProvider and the only implementation is private. Configuration goes on the outputCache section and on each page and web user control you can choose the provider you want to use. 1: <caching> 2: <outputCache defaultProvider="MyProvider"> 3: <providers> 4: <add name="MyProvider" type="MyClass, MyAssembly"/> 5: </providers> 6: </outputCache> 7: </caching> Request Validation A big change introduced in ASP.NET 4 (and refined in 4.5, by the way) is the introduction of extensible request validation, by means of a Request Validation provider. This means we are not limited to either enabling or disabling event validation for all pages or for a specific page, but we now have fine control over each of the elements of the request, including cookies, headers, query string and form values. The base provider class is RequestValidator and the configuration goes on the httpRuntime section. 1: <httpRuntime requestValidationType="MyClass, MyAssembly" /> Browser Capabilities The Browser Capabilities provider is new in ASP.NET 4, although the concept exists from ASP.NET 2. The idea is to map a browser brand and version to its supported capabilities, such as JavaScript version, Flash support, ActiveX support, and so on. Previously, this was all hardcoded in .Browser files located in %WINDIR%\Microsoft.NET\Framework(64)\vXXXXX\Config\Browsers, but now you can have a class inherit from HttpCapabilitiesProvider and implement your own mechanism. Register in on the browserCaps section. 1: <browserCaps provider="MyClass, MyAssembly" /> Encoder The Encoder provider is responsible for encoding every string that is sent to the browser on a page or header. This includes for example converting special characters for their standard codes and is implemented by the base class HttpEncoder. Another implementation takes care of Anti Cross Site Scripting (XSS) attacks. Build your own by inheriting from one of these classes if you want to add some additional processing to these strings. The configuration will go on the httpRuntime section. 1: <httpRuntime encoderType="MyClass, MyAssembly" /> Conclusion That’s about it for ASP.NET providers. It was by no means a thorough description, but I hope I managed to raise your interest on this subject. There are lots of pointers on the Internet, so I only included direct references to the Framework classes and configuration sections. Stay tuned for more extensibility!

    Read the article

  • Mozilla Weave can't sync Firefox. What's wrong?

    - by Mehper C. Palavuzlar
    For the last few days, Mozilla Weave can't sync. Below is the activity log. Any ideas? 2010-05-02 20:47:15 Service.Main WARN Unknown error while downloading metadata record. Aborting sync. 2010-05-02 20:47:15 Service.Main CONFIG Starting backoff, next sync at:Sun May 02 2010 21:16:09 GMT+0300 (GTB Yaz Saati) 2010-05-02 20:47:15 Service.Main DEBUG Exception: aborting sync, remote setup failed No traceback available 2010-05-02 21:16:09 Service.Main DEBUG Idle timer created for sync, will sync after 5 seconds of inactivity. 2010-05-02 21:16:30 Net.Resource DEBUG GET success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/meta/global 2010-05-02 21:16:30 Service.Main DEBUG Weave Version: 1.2.3 Local Storage: 2 Remote Storage: 2 2010-05-02 21:26:50 Net.Resource DEBUG GET success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/info/collections 2010-05-02 21:26:50 Engine.Clients INFO 0 outgoing items pre-reconciliation 2010-05-02 21:26:50 Engine.Clients INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:26:50 Engine.Clients DEBUG Total (ms): sync 6, processIncoming 3, uploadOutgoing 0, syncStartup 3, syncFinish 0 2010-05-02 21:26:50 Engine.Bookmarks INFO 0 outgoing items pre-reconciliation 2010-05-02 21:26:50 Engine.Bookmarks INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:26:50 Engine.Bookmarks DEBUG Total (ms): sync 13, processIncoming 5, uploadOutgoing 0, syncStartup 3, syncFinish 3 2010-05-02 21:26:50 Engine.Forms INFO 1 outgoing items pre-reconciliation 2010-05-02 21:26:50 Engine.Forms INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:26:50 Engine.Forms INFO Uploading all of 1 records 2010-05-02 21:26:50 Collection DEBUG POST Length: 388 2010-05-02 21:27:06 Collection DEBUG POST success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/forms 2010-05-02 21:27:06 Engine.Forms DEBUG Total (ms): sync 15924, processIncoming 3, uploadOutgoing 15918, syncStartup 3, syncFinish 0, createRecord 1 2010-05-02 21:27:06 Engine.History INFO 55 outgoing items pre-reconciliation 2010-05-02 21:27:06 Engine.History INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:09 Engine.History INFO Uploading all of 55 records 2010-05-02 21:27:09 Collection DEBUG POST Length: 35337 2010-05-02 21:27:32 Collection DEBUG POST success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/history 2010-05-02 21:27:32 Engine.History DEBUG Total (ms): sync 25588, processIncoming 4, uploadOutgoing 25580, syncStartup 3, syncFinish 0, createRecord 2540 2010-05-02 21:27:32 Engine.Passwords INFO 0 outgoing items pre-reconciliation 2010-05-02 21:27:32 Engine.Passwords INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:32 Engine.Passwords DEBUG Total (ms): sync 8, processIncoming 4, uploadOutgoing 0, syncStartup 4, syncFinish 0 2010-05-02 21:27:32 Engine.Prefs INFO 0 outgoing items pre-reconciliation 2010-05-02 21:27:32 Engine.Prefs INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:32 Engine.Prefs DEBUG Total (ms): sync 8, processIncoming 3, uploadOutgoing 0, syncStartup 4, syncFinish 0 2010-05-02 21:27:32 Engine.Tabs INFO 1 outgoing items pre-reconciliation 2010-05-02 21:27:32 Engine.Tabs INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:32 Engine.Tabs INFO Uploading all of 1 records 2010-05-02 21:27:32 Collection DEBUG POST Length: 393 2010-05-02 21:27:54 Collection DEBUG POST success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/tabs 2010-05-02 21:27:54 Engine.Tabs DEBUG Total (ms): sync 21943, processIncoming 3, uploadOutgoing 21936, syncStartup 3, syncFinish 0, createRecord 8 2010-05-02 21:27:54 Service.Main INFO Sync completed successfully 2010-05-02 22:27:53 Service.Main DEBUG Idle timer created for sync, will sync after 5 seconds of inactivity. 2010-05-02 22:28:14 Net.Resource DEBUG GET success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/meta/global 2010-05-02 22:28:14 Service.Main DEBUG Weave Version: 1.2.3 Local Storage: 2 Remote Storage: 2 2010-05-02 22:28:16 Net.Resource DEBUG GET fail 503 https://sj-weave03.services.mozilla.com/1.0/mehper/info/collections 2010-05-02 22:28:16 Service.Main DEBUG Exception: aborting sync, failed to get collections No traceback available 2010-05-02 23:28:15 Service.Main DEBUG Idle timer created for sync, will sync after 5 seconds of inactivity. 2010-05-03 00:26:42 Service.Main DEBUG Exception: Could not acquire lock No traceback available 2010-05-03 00:31:03 RecordMgr DEBUG Failed to import record: App. Quitting JS Stack trace: Res__request(...)@resource.js:208 < Res_get()@resource.js:271 < RecordMgr_import("https://sj-weave03.services.mozilla.com/1.0/mehper/storage/meta/global")@wbo.js:119 < WeaveSvc__remoteSetup()@service.js:824 < ()@service.js:1187 < WrappedNotify()@util.js:114 < WrappedLock()@util.js:86 < WrappedCatch()@util.js:65 < sync(false)@service.js:1146 < ([object Object])@service.js:414 < notify([object XPCWrappedNative_NoHelper])@util.js:629 2010-05-03 00:31:03 Service.Main DEBUG Weave Version: 1.2.3 Local Storage: 2 Remote Storage: 2010-05-03 00:31:03 Service.Main WARN Unknown error while downloading metadata record. Aborting sync. 2010-05-03 00:31:03 Service.Main DEBUG Exception: aborting sync, remote setup failed No traceback available 2010-05-03 17:26:25 Service.Main INFO Loading Weave 1.2.3 2010-05-03 17:26:25 Engine.Bookmarks DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Forms DEBUG Engine initialized 2010-05-03 17:26:25 Engine.History DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Passwords DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Prefs DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Tabs DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Tabs DEBUG Resetting tabs last sync time 2010-05-03 17:26:25 Service.Main INFO Mozilla/5.0 (Windows; U; Windows NT 6.1; tr; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729) 2010-05-03 17:26:26 Service.Main DEBUG Caching URLs under storage user base: https://sj-weave03.services.mozilla.com/1.0/mehper/ 2010-05-03 17:26:30 Service.Main DEBUG Autoconnecting in 3 seconds 2010-05-03 17:26:36 Service.Main INFO Logging in user mehper 2010-05-03 17:45:46 Service.Main DEBUG Exception: Could not acquire lock No traceback available 2010-05-03 17:53:18 Service.Main DEBUG Exception: Could not acquire lock No traceback available

    Read the article

  • CloudBerry Online Backup 1.5 for Windows Home Server

    - by The Geek
    Overview CloudBerry Online Backup version 1.5 is a front end application for Amazon S3 storage for backing up your Windows Home Server data. It makes backing up your essential data to Amazon S3 an easy process in the event the disaster strikes. Installation You install the Cloudberry Addin as you do for any addins for Windows Home Server. On a PC on your network, browse to the shared folders on your server and open the Add-Ins folder and copy over WHS_CloudBerryOnlineBackupSetup_v1.5.0.81S3o.msi (link below), then close out of the folder. Next launch the Windows Home Server Console, click Settings, then Add-Ins. Click on the Available tab and click the Install button. It installs very quickly, and when you get the Installation Succeeded dialog click OK. You will lose connection through the Console, just click OK, then reconnect. After reconnecting, you’ll see CloudBerry Backup has been installed, and you can begin using it. You can setup a backup plan right away or find out what’s new with version 1.5. Amazon S3 Account If you don’t already have an Amazon S3 account, you’ll be prompted to create a new one. Click on the Create an account hyperlink, which takes you to the Amazon S3 page where you can sign up. After reviewing the functionality of Amazon S3, click on the Sign Up for Amazon S3 button. Enter in your contact information and accept the Amazon Web Services Customer Agreement. You’re then shown their pricing for storage plans. The amount of storage space you use will depend on your needs. It’s relatively cheap for smaller amounts of data. Just keep in mind the more data you store and download, the more S3 is going to cost. Note: Amazon S3 is introducing Reduced Redundancy Storage which will lower the cost of the data stored on S3. CloudBerry 1.5 will support this new feature. You can find out more about this new pricing structure. Note: Keep in mind that after you first sign up for an Amazon S3 account, it can take up to 24 hours to be authorized. In fact, you may want to sign up for the S3 account before installing the Add-In. After you sign up for your S3 Account, you’ll be given access credentials which you can enter in and create a Storage Bucket name. Features & Use CloudBerry is wizard driven, straight-forward and easy to use. Here we take a look at creating a backup plan. To begin, click on the Setup Backup Plan button to kick off the wizard. Select your backup mode based on the amount of features you want. In our example we’re going to select Advanced Mode as it offers more features than Simple Mode. Select your backup storage account or create a new one. You can select a default account by checking Use currently selected account as default. Now you can go through and select the files and folders you want to backup from your home server. Check the box Show physical drives to get more of a selection of files and folders. This also allows you to backup files from your data drive as well. It has full support for drive extenders so you can backup your shares as well. The cool thing about Cloudberry is it allows you to drill down specific files and folders unlike other WHS backup utilities. Next you can use advanced filters to specify files and/or folders to skip if you want. There are compression and encryption options as well. This will save storage space, bandwidth, and keep your data secure. Purge Options allow you to customize options for getting rid of older files. You can also select the option to delete files from the S3 service that have been deleted locally. Be careful with this option however, as you won’t be able to restore files if you delete them locally. You have some nice scheduling options from running backups manually, specific date and time, or recurring daily, weekly or monthly. Receive email notifications in all cases or when a backup fails. This is a good option so you know if things were successful or something failed, and you need to back it up manually. Email notifications… Give your plan a name… Then if the summary page looks good you can continue, or still go back at this point if something doesn’t look correct and needs adjusting. That’s it! You’re ready to go, and you have an option to start your first backup right away. After you’ve created a backup plan, you can go in and edit, delete, view history, or restore files. Restoring Files using CloudBerry To restore data from your backups kick off the Restore Wizard and select the backup to restore from. You can select the last backup, a specific point in time, or manually browse through the files. Browse through the directory and select the files you need to restore. Choose the destination to restore the files to. You can select from the original location, a specific location, to overwrite existing files, or set the location as the default for future restores. If the files are encrypted, enter in the correct passwords. If the summary looks good, click on Next to start the restore process. You’ll be shown a progress bar at the bottom of the screen while the files are restored. After the process has completed, close out of the Restore Wizard. In this example we restored a couple of music files to the desktop of Windows Home Server… But as shown above you can save them to the original location, other network locations, or WHS shared folders. This can make it a lot easier to keep track of files you’ve restored. You can also access different options for CloudBerry by clicking Settings in WHS Console then CloudBerry Backup. Here you can set up a new storage account, check for updates, app options, Diagnostics, and send feedback. Under Options there are several settings you can tweak to get the best experience for your WHS backups. CloudBerry Web Interface Another nice feature is the CloudBerry Web Interface so you can access your data from anywhere you have an Internet connection. To check it out in WHS Console, click on the Backup Web Interface link…you’ll probably want to bookmark the link in your favorite browser. Note: This feature is still in beta and at the time of this review, the Web Interface wasn’t up and running so we weren’t able to test it out. Performance The Cloudberry app works very well through the Windows Home Server Console. The amount of time it takes to backup or restore your data will depend on the speed of your Internet connection and size of the files. In our tests, backing up 1GB of data to the Amazon S3 account took around an hour, but we were running it on a DSL with limited upload speeds so your mileage will vary. Product Support In our experience, the team at CloudBerry offered great support in a timely manner when contacting them. You can fill out a help request through a form on their website and they also have a community forum. Conclusion We were very pleased with CloudBerry Online Backup for WHS. It’s wizard driven interface makes it extremely easy to use, and offers comprehensive backup choices for your Amazon S3 account. CloudBerry will only backup files that have been modified, so if files haven’t been changed, they won’t be backed up again.They offer a free 15 day trial and is $29.99 after that for a full license. Once you buy the app you own it, and charges to your S3 account will vary depending on the amount of data you upload. If you’re looking for an effective and easy to use front end application to backup your Windows Home Server data to your Amazon S3 account, CloudBerry is a recommended affordable choice. Download CloudBerry for Windows Home Server Sign Up For Amazon S3 Account Rating Installation: 9 Ease of Use: 8 Features: 8 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerBackup Windows Home Server Folders to an External Hard DriveBackup Your Windows Home Server Off-Site with Asus WebstorageRemove a Network Computer from Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

    Read the article

  • Stream Media and Live TV Across the Internet with Orb

    - by DigitalGeekery
    Looking for a way to stream your media collection across the Internet? Or perhaps watch and record TV remotely? Today we are going to look at how to do all that and more with Orb. Requirements Windows XP / Vista / 7 or Intel based Mac w/ OS X 10.5 or later. 1 GB RAM or more Pentium 4 2.4 GHz or higher / AMD Athlon 3200+ Broadband connections TV Tuner for streaming and recording live TV (optional) Note: Slower internet connections may result in stuttering during playback. Installation and Setup Download and install Orb on your home computer. (Download link below) You’ll want to take the defaults for the initial portion of the install. When we get to the Orb Account setup portion of the install is when we will have to enter information and make some decisions. Choose your language and click Next. We’ll need to create and user account and password. A valid email address is required as we’ll need to confirm the account later. Click Next.   Now you’ll want to choose your media sources. Orb will automatically look for folders that may contain media files. You can add or remove folders click on the (+) or (-) buttons. To remove a folder, click on it once to select it from the list and then click the minus (-) button. To add a folder, click the plus (+) button and browse for the folder. You can add local folders as well as shared folders from networked computers and USB attached storage. Note: Both the host computer running Orb and the networked computer will need to be running to access shared network folders remotely. When you’ve selected all your media files, click Next. Orb will proceed to index your media files… When the indexing is complete, click Next. Orb TV Setup Note: Streaming Live TV to Macs is not currently supported. If you have a TV tuner card connected to your PC, you can opt to configure Orb to stream live or recorded TV. Click Next  to configure TV. Or, choose Skip if you don’t wish to configure Orb for TV.   If you have a Digital tuner card, type in your Zip Code and click Get List to pull your channel listings. Select a TV provider from the list and click Next. If not, click Skip.   You can select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Next choose an analog provider, if necessary, and click Next.   Select “Yes” or “No” for a set top box and click Next. Just as we did with the Digital tuner, select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Now we’re finished with the setup. Click Close. Accessing your Media Remotely Media files are accessed through a web-based interface. Before we go any further, however, we’ll need to confirm our username and password. Check your inbox for an email from Orb Networks. Click the enclosed confirmation link. You’ll be prompted to enter the username and password you selected in your browser then click Next.   Your account will be confirmed. Now, we’re ready to enjoy our media remotely. To get started, point your browser to the MyCast website from your remote computer. (See link below) Enter your credentials and click Log In. Once logged in, you’ll be presented with the MyCast Home screen. By default you’ll see a handful of “channels” such as a TV program guide, random audio and photos, video favorites, and weather. You can add, remove, or customize channels. To add additional channels, click on Add Channels at the top right…   …and select from the dropdown list. To access your full media libraries, click Open Application at the top left and select from one of the options. Live and Recorded TV If you have a TV tuner card you configured for Orb, you’ll see your program guide on the TV / Webcams screen. To watch or record a show, click on the program listing to bring up a detail box. Then click the red button to record, or the green button to play. When recording a show, you’ll see a pulsating red icon at the top right of the listing in the program guide. If you want to watch Live TV, you may be prompted to choose your media player, depending on your browser and settings. Playback should begin shortly.   Note for Windows Media Center Users If you try to stream live TV in Orb while Windows Media Center is running on your PC, you’ll get an error message. Click the Stop MediaCenter button and then try again.   Audio On the Audio screen, you’ll find your music files indexed by genre, artist, and album. You can play a selection by clicking once and then clicking the green play button, or by simply double-clicking.   Playback will begin in the default media player for the streaming format.   Video Video works essentially the same as audio. Click on a selection and press the green play button, or double-click on the video title. Video playback will begin in the default media player for the streaming format.   Streaming Formats You can change the default streaming format in the control panel settings. To access the Control Panel, click on Open Applications  and select Control Panel. You can also click Settings at the top right.   Select General from the drop down list and then click on the Streaming Formats tab. You are provided four options. Flash, Windows Media, .SDP, and .PLS.   Creating Playlists To create playlists, drag and drop your media title to the playlist work area on the right, or click Add to playlist on the top menu. Click Save when finished.    Sharing your Media Orb allows you to share media playlists across the Internet with friends and family. There are a few ways to accomplish this. We’ll start by click the Share button at the bottom of the playlist work area after you’ve compiled your playlist. You’ll be prompted to choose a method by which to share your playlist. You’ll have the option to share your playlist publicly or privately. You can share publically through links, blogs, or on your Orb public profile.  By choosing the Public Profile option, Orb will automatically create a profile page for you with a URL like http://public.orb.com/username that anyone can easily access on the Internet. The private sharing option allows you to invite friends by email and requires recipients to register with Orb. You can also give your playlist a custom name, or accept the auto-generated title. Click OK when finished. Users who visit your public profile will be able to view and stream any of your shared playlists to their computer or supported device.   Portable Media Devices and Smartphones Orb can stream media to many portable devices and 3G phones. Streaming audio is supported on the iPhone and iPod Touch through the Safari browser. However, video and live TV streaming requires the Orb Live iPhone App.  Orb Live is available in the App store for $9.99. To stream media to your portable device, go to the MyCast website in your mobile browser and login. Browse for your media or playlist. Make a selection and play the media. Playback will begin. We found streaming music to both the Droid and the iPhone to work quite nicely. Video playback on the Droid, however, left a bit to be desired. The video looked good, but the audio tended to be out of sync. System Tray Control Panel By default Orb runs in the system tray on start up. To access the System Tray Control Panel, right-click on the Orb icon in the system tray and select Control Panel. Login with your Orb username and  password and click OK.   From here you can add or remove media sources, add manage accounts, change your password, and more. If you’d rather not run Orb on Startup, click the General icon.   Unselect the checkbox next to Start Orb when the system starts. Conclusion It may seem like a lot of steps, but getting Orb up and running isn’t terribly difficult. Orb is available for both Windows and Intel based Macs. It also supports streaming to many Game Consoles such as the Wii, PS3, and XBox 360. If you are running Windows 7 on multiple computers, you may want to check out our write-up on how to stream music and video over the Internet with Windows Media Player 12. Downloads Download Orb Logon to MyCast Similar Articles Productive Geek Tips Stream Music and Video Over the Internet with Windows Media Player 12Enable Media Streaming in Windows Home Server to Windows Media PlayerStream Media from Windows 7 to XP with VLC Media PlayerShare Digital Media With Other Computers on a Home Network with Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

    Read the article

  • Predicting Likelihood of Click with Multiple Presentations

    - by Michel Adar
    When using predictive models to predict the likelihood of an ad or a banner to be clicked on it is common to ignore the fact that the same content may have been presented in the past to the same visitor. While the error may be small if the visitors do not often see repeated content, it may be very significant for sites where visitors come repeatedly. This is a well recognized problem that usually gets handled with presentation thresholds – do not present the same content more than 6 times. Observations and measurements of visitor behavior provide evidence that something better is needed. Observations For a specific visitor, during a single session, for a banner in a not too prominent space, the second presentation of the same content is more likely to be clicked on than the first presentation. The difference can be 30% to 100% higher likelihood for the second presentation when compared to the first. That is, for example, if the first presentation has an average click rate of 1%, the second presentation may have an average CTR of between 1.3% and 2%. After the second presentation the CTR stays more or less the same for a few more presentations. The number of presentations in this plateau seems to vary by the location of the content in the page and by the visual attraction of the content. After these few presentations the CTR starts decaying with a curve that is very well approximated by an exponential decay. For example, the 13th presentation may have 90% the likelihood of the 12th, and the 14th has 90% the likelihood of the 13th. The decay constant seems also to depend on the visibility of the content. Modeling Options Now that we know the empirical data, we can propose modeling techniques that will correctly predict the likelihood of a click. Use presentation number as an input to the predictive model Probably the most straight forward approach is to add the presentation number as an input to the predictive model. While this is certainly a simple solution, it carries with it several problems, among them: If the model learns on each case, repeated non-clicks for the same content will reinforce the belief of the model on the non-clicker disproportionately. That is, the weight of a person that does not click for 200 presentations of an offer may be the same as 100 other people that on average click on the second presentation. The effect of the presentation number is not a customer characteristic or a piece of contextual data about the interaction with the customer, but it is contextual data about the content presented. Models tend to underestimate the effect of the presentation number. For these reasons it is not advisable to use this approach when the average number of presentations of the same content to the same person is above 3, or when there are cases of having the presentation number be very large, in the tens or hundreds. Use presentation number as a partitioning attribute to the predictive model In this approach we essentially build a separate predictive model for each presentation number. This approach overcomes all of the problems in the previous approach, nevertheless, it can be applied only when the volume of data is large enough to have these very specific sub-models converge.

    Read the article

  • Building services with .Net Part 1

    - by Allan Rwakatungu
    On the 26th of May 2010 , I made a presentation to the .NET user group meeting (thanks to Malisa Ncube for organizing this event every month … ). If you missed my presentation , we talked about why we should all be building services … better still using the .NET framework. This blog post is an introduction to services , why you would want to build services and how you can build services using the .NET framework. What is a service? OASIS defines service as "a mechanism to enable access to one or more capabilities, where the access is provided using a prescribed interface and is exercised consistent with constraints and policies as specified by the service description." [1]. If the above definition sounds to academic , you can also define a service as loosely coupled units of functionality that have no calls to each other embedded in the. Instead of services embedding calls to each other in their service code they use defined protocols that describe how services pass and parse messages. This is a good way to think about services if you’re from an objected oriented background. While in object oriented programming functions make calls to each other, in service oriented programming, functions pass messages between each other. Why would you want to use services? 1. If your enterprise architecture looks like this   Services are the building blocks for SOA . With SOA you can move away from the sphaggetti infrastructure that is common in most enterprises. The complexity or lack of visibility of the integration points in your enterprises makes it difficult and costly to implement new initiatives and changes into the business - and even impossible in some cases - as it is not possible to identify the impact a change in one system might have to other systems. With services you can move to an architecture like this Your building blocks from Spaghetti infrastructure to something that is more well-defined and manageable to achieve cost efficiency and not least business agility - enabling you to react to changes in the market with speed and achieve operational efficiency and control are services. 2. If you want to become the Gates or Zuckerburger. Have you heard about Web 2.0 ? Mashups? Software as a service (SAAS) ? Cloud computing ?   They all offer you the opportunity to have scalable but low cost business models and they built using services.  Some of my favorite companies that leverage services for their business models include  https://www.salesforce.com/ (cloud CRM) http://www. twitter.com (more people use twitter clients built by 3rd parties than their official clients) http://www.kayak.com/ (compares data from other travel sites to give information to users in one location) Services with the .NET framework      If you are a .NET developer and you want to develop services, Windows Communication Framework (WCF) is the tool for you. WCF is Microsoft’s unified programming model (service model) for building service oriented applications. ( Before .NET 3.0 you had several models for programming services in .NET including .NET remoting, Web services (ASMX), COM +, Microsoft Messaging queuing (MSMQ) etc, after .NET 3.0 the programming model was unified into one i.e. WCF ). Windows Communication Framework (WCF) provides you 1. An Software Development Kit (SDK) for creating SOA applications 2. A runtime for running services on the Windows platform Why should you use Windows Communication Foundation if you’re programming services?   1. It supports interoperable and open standards e.g. WS* protocols for programming SOAP services 2. It has a unified programming model. Whether you use TCP or Http or Pipes or transmitting using Messaging Queues, programmers need to learn just one way to program. Previously you had .NET remoting, MSMQ, Web services, COM+ and they were all done differently 3. Productive programming model You don’t have to worry about all the plumbing involved to write services. You have a rich declarative programming model to add stuff like logging, transactions, and reliable messages in-built in the Windows Communication Framework. Understanding services in WCF The basic principles of WCF are as easy as ABC A – Address This is where the service is located B- Binding This describes how you communicate with the service e.g. Use TCP, HTTP or both. How to exchange security information with the service etc. C – Contract This defines what the service can do. E.g. Pay water bill, Make a phone call A - Addresses In WCF, an address is a combination of transport, server name, port and path Example addresses may include http://localhost:8001 net.tcp://localhost:8002/MyService net.pipe://localhost/MyPipe net.msmq://localhost/private/MyService net.msmq://localhost/MyService B- Binding   There are numerous ways to communicate with services , different ways that a message can be formatted/sent/secured, that allows you to tailor your service for the compatibility/performance you require for your solution. Transport You can use HTTP TCP MSMQ , Named pipes, Your own custom transport etc Message You  can send a plain text binary, Message Transmission Optimization Mechanism (MTOM) message Communication security No security Transport security Message security Authenticating and authorizing callers etc Behaviour You service can support Transactions Be reliable Use queues Support ajax etc C - Contract You define what your service can do using Service contracts :- Define operations that your service can do, communications and behaviours Data contracts :- Define the messages that are passed from and into your service and how they are formatted Fault contracts :- Defines errors types in your service   As an example, suppose your service service shows money. You define your service contract using a interface [ServiceContract] public interface IShowMeTheMoney {   [OperationContract]    Money Show(); } You define the data contract by annotating a class it with the Data Contract attribute and fields you want to pass in the message as Data Members. (Note:- In the latest versions of WCF you dont have to use attributes if you passing all the objects properties in the message) [DataContract] public Money {   [DataMember]   public string Currency { get; set; }   [DataMember]   public Decimal Amount { get; set; }   public string Comment { get; set; } } Features of Windows Communication Foundation Windows Communication Foundation is not only simple but feature rich , offering you several options to tweak your service to fit your business requirements. Some of the features of WCF include 1. Workflow services You can combine WCF with Windows WorkFlow Foundation (WWF) to write workflow type services 2. Control how your data (messages) are transferred and serialized e.g. you can serialize your business objects as XML or binary 3. control over session management , instance creation and concurrency management without writing code if you like 4. Queues and reliable sessions. You can store messages from the sending client and later forward them to the receiving application. You can also guarantee that messages will arrive at their destincation. 5.Transactions:  You can have different services participate in a transaction operations that can be rolled back if needed 6. Security. WCF has rich features for authorization and authentication  as well as keep audit trails 7. Web programming model. WCF allows developers to expose services as non SOAP endpoints 8. Inbuilt features that you can use to write JSON and services that support AJAX applications And lots more In my next blog I will show you how you can use WCF features to write a real world business service.               Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ]] /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • How to update all the SSIS packages&rsquo; Connection Managers in a BIDS project with PowerShell

    - by Luca Zavarella
    During the development of a BI solution, we all know that 80% of the time is spent during the ETL (Extract, Transform, Load) phase. If you use the BI Stack Tool provided by Microsoft SQL Server, this step is accomplished by the development of n Integration Services (SSIS) packages. In general, the number of packages made ??in the ETL phase for a non-trivial solution of BI is quite significant. An SSIS package, therefore, extracts data from a source, it "hammers" :) the data and then transfers it to a specific destination. Very often it happens that the connection to the source data is the same for all packages. Using Integration Services, this results in having the same Connection Manager (perhaps with the same name) for all packages: The source data of my BI solution comes from an Helper database (HLP), then, for each package tha import this data, I have the HLP Connection Manager (the use of a Shared Data Source is not recommended, because the Connection String is wired and therefore you have to open the SSIS project and use the proper wizard change it...). In order to change the HLP Connection String at runtime, we could use the Package Configuration, or we could run our packages with DTLoggedExec by Davide Mauri (a must-have if you are developing with SQL Server 2005/2008). But my need was to change all the HLP connections in all packages within the SSIS Visual Studio project, because I had to version them through Team Foundation Server (TFS). A good scribe with a lot of patience should have changed by hand all the connections by double-clicking the HLP Connection Manager of each package, and then changing the referenced server/database: Not being endowed with such virtues :) I took just a little of time to write a small script in PowerShell, using the fact that a SSIS package (a .dtsx file) is nothing but an xml file, and therefore can be changed quite easily. I'm not a guru of PowerShell, but I managed more or less to put together the following lines of code: $LeftDelimiterString = "Initial Catalog=" $RightDelimiterString = ";Provider=" $ToBeReplacedString = "AstarteToBeReplaced" $ReplacingString = "AstarteReplacing" $MainFolder = "C:\MySSISPackagesFolder" $files = get-childitem "$MainFolder" *.dtsx `       | Where-Object {!($_.PSIsContainer)} foreach ($file in $files) {       (Get-Content $file.FullName) `             | % {$_ -replace "($LeftDelimiterString)($ToBeReplacedString)($RightDelimiterString)", "`$1$ReplacingString`$3"} ` | Set-Content $file.FullName; } The script above just opens any SSIS package (.dtsx) in the supplied folder, then for each of them goes in search of the following text: Initial Catalog=AstarteToBeReplaced;Provider= and it replaces the text found with this: Initial Catalog=AstarteReplacing;Provider= I don’t enter into the details of each cmdlet used. I leave the reader to search for these details. Alternatively, you can use a specific object model exposed in some .NET assemblies provided by Integration Services, or you can use the Pacman utility: Enjoy! :) P.S. Using TFS as versioning system, before running the script I checked out the packages and, after the script executed succesfully, I checked in them.

    Read the article

  • Entity Framework v1 &hellip; Brief Synopsis and Tips &ndash; Part 2

    - by Rohit Gupta
    Using Entity Framework with ASMX Web sErvices and WCF Web Service: If you use ASMX WebService to expose Entity objects from Entity Framework... then the ASMX Webservice does not  include object graphs, one work around is to use Facade pattern or to use WCF Service. The other important aspect of using ASMX Web Services along with Entity Framework is that the ASMX Client is not aware of the existence of EF v1 since the client solely deals with C# objects (not EntityObjects or ObjectContext). Since the client is not aware of the ObjectContext hence the client cannot participate in change tracking since the client only receives the Current Values and not the Orginal values when the service sends the the Entity objects to the client. Thus there are 2 drawbacks to using EntityFramework with ASMX Web Service: 1. Object state is not maintained... so to overcome this limitation we need insert/update single entity at a time and retrieve the original values for the entity being updated on the server/service end before calling Save Changes. 2. ASMX does not maintain object graphs... i.e. Customer.Reservations or Customer.Reservations.Trip relationships are not maintained. Thus you need to send these relationships separately from service to client. WCF Web Service overcomes the object graph limitation of ASMX Web Service, but we need to insure that we are populating all the non-null scalar properties of all the objects in the object graph before calling Update. WCF Web service still cannot overcome the second limitation of tracking changes to entities at the client end. Also note that the "Customer" class in the Client is very different from the "Customer" class in the Entity Framework Model Entities. They are incompatible with each other hence we cannot cast one to the other. However the .NET Framework translates the client "Customer" Entity to the EFv1 Model "customer" Entity once the entity is serialzed back on the ASMX server end. If you need change tracking enabled on the client then we need to use WCF Data Services which is available with VS 2010. ====================================================================================================== In WCF when adding an object that has relationships, the framework assumes that every object in the object graph needs to be added to store. for e.g. in a Customer.Reservations.Trip object graph, when a Customer Entity is added to the store, the EFv1 assumes that it needs to a add a Reservations collection and also Trips for each Reservation. Thus if we need to use existing Trips for reservations then we need to insure that we null out the Trip object reference from Reservations and set the TripReference to the EntityKey of the desired Trip instead. ====================================================================================================== Understanding Relationships and Associations in EFv1 The Golden Rule of EF is that it does not load entities/relationships unless you ask it to explicitly do so. However there is 1 exception to this rule. This exception happens when you attach/detach entities from the ObjectContext. If you detach an Entity in a ObjectGraph from the ObjectContext, then the ObjectContext removes the ObjectStateEntry for this Entity and all the relationship Objects associated with this Entity. For e.g. in a Customer.Order.OrderDetails if the Customer Entity is detached from the ObjectContext then you cannot traverse to the Order and OrderDetails Entities (that still exist in the ObjectContext) from the Customer Entity(which does not exist in the Object Context) Conversely, if you JOIN a entity that is not in the ObjectContext with a Entity that is in the ObjContext then the First Entity will automatically be added to the ObjContext since relationships for the 2 Entities need to exist in the ObjContext. ========================================================= You cannot attach an EntityCollection to an entity through its navigation property for e.g. you cannot code myContact.Addresses = myAddressEntityCollection ========================================================== Cascade Deletes in EDM: The Designer does not support specifying cascase deletes for a Entity. To enable cascasde deletes on a Entity in EDM use the Association definition in CSDL for the Entity. for e.g. SalesOrderDetail (SOD) has a Foreign Key relationship with SalesOrderHeader (SalesOrderHeader 1 : SalesOrderDetail *) if you specify a cascade Delete on SalesOrderHeader Entity then calling deleteObject on SalesOrderHeader (SOH) Entity will send delete commands for SOH record and all the SOD records that reference the SOH record. ========================================================== As a good design practise, if you use Cascade Deletes insure that Cascade delete facet is used both in the EDM as well as in the database. Even though it is not absolutely mandatory to have Cascade deletes on both Database and EDM (since you can see that just the Cascade delete spec on the SOH Entity in EDM will insure that SOH record and all related SOD records will be deleted from the database ... even though you dont have cascade delete configured in the database in the SOD table) ============================================================== Maintaining relationships in Code When Setting a Navigation property of a Entity (for e.g. setting the Contact Navigation property of Address Entity) the following rules apply : If both objects are detached, no relationship object will be created. You are simply setting a property the CLR way. If both objects are attached, a relationship object will be created. If only one of the objects is attached, the other will become attached and a relationship object will be created. If that detached object is new, when it is attached to the context its EntityState will be Added. One important rule to remember regarding synchronizing the EntityReference.Value and EntityReference.EntityKey properties is that when attaching an Entity which has a EntityReference (e.g. Address Entity with ContactReference) the Value property will take precedence and if the Value and EntityKey are out of sync, the EntityKey will be updated to match the Value. ====================================================== If you call .Load() method on a detached Entity then the .Load() operation will throw an exception. There is one exception to this rule. If you load entities using MergeOption.NoTracking, you will be able to call .Load() on such entities since these Entities are accessible by the ObjectContext. So the bottomline is that we need Objectontext to be able to call .Load() method to do deffered loading on EntityReference or EntityCollection. Another rule to remember is that you cannot call .Load() on entities that have a EntityState.Added State since the ObjectContext uses the EntityKey of the Primary (Parent) Entity when loading the related (Child) Entity (and not the EntityKey of the child (even if the EntityKey of the child is present before calling .Load()) ====================================================== You can use ObjContext.Add() to add a entity to the ObjContext and set the EntityState of the new Entity to EntityState.Added. here no relationships are added/updated. You can also use EntityCollection.Add() method to add an entity to another entity's related EntityCollection for e.g. contact has a Addresses EntityCollection so to add a new address use contact.Addresses.Add(newAddress) to add a new address to the Addresses EntityCollection. Note that if the entity does not already exist in the ObjectContext then calling contact.Addresses.Add(myAddress) will cause a new Address Entity to be added to the ObjContext with EntityState.Added and it will also add a RelationshipEntry (a relationship object) with EntityState.Added which connects the Contact (contact) with the new address newAddress. Note that if the entity already exists in the Objectcontext (being part theOtherContact.Addresses Collection), then calling contact.Addresses.Add(existingAddress) will add 2 RelationshipEntry objects to the ObjectStateEntry Collection, one with EntityState.Deleted and the other with EntityState.Added. This implies that the existingAddress Entity is removed from the theOtherContact.Addresses Collection and Added to the contact.Addresses Collection..effectively reassigning the address entity from the theOtherContact to "contact". This is called moving an existing entity to a new object graph. ====================================================== You usually use ObjectContext.Attach() and EntityCollection.Attach() methods usually when you need to reconstruct the ObjectGraph after deserializing the objects as received from a ASMX Web Service Client. Attach is usually used to connect existing Entities in the ObjectContext. When EntityCollection.Attach() is called the EntityState of the RelationshipEntry (the relationship object) remains as EntityState.unchanged whereas when EntityCollection.Add() method is called the EntityState of the relationship object changes to EntityState.Added or EntityState.Deleted as the situation demands. ========================================================= LINQ To Entities Tips: Select Many does Inner Join by default.   for e.g. from c in Contact from a in c.Address select c ... this will do a Inner Join between the Contacts and Addresses Table and return only those Contacts that have a Address. ======================================================== Group Joins Do LEFT Join by default. e.g. from a in Address join c in Contact ON a.Contact.ContactID == c.ContactID Into g WHERE a.CountryRegion == "US" select g; This query will do a left join on the Contact table and return contacts that have a address in "US" region The following query : from c in Contact join a in Address.Where(a1 => a1.CountryRegion == "US") on c.ContactID  equals a.Contact.ContactID into addresses select new {c, addresses} will do a left join on the Address table and return All Contacts. In these Contacts only those will have its Address EntityCollection Populated which have a Address in the "US" region, the other contacts will have 0 Addresses in the Address collection (even if addresses for those contacts exist in the database but are in a different region) ======================================================== Linq to Entities does not support DefaultIfEmpty().... instead use .Include("Address") Query Builder method to do a Left JOIN or use Group Joins if you need more control like Filtering on the Address EntityCollection of Contact Entity =================================================================== Use CreateSourceQuery() on the EntityReference or EntityCollection if you need to add filters during deferred loading of Entities (Deferred loading in EFv1 happens when you call Load() method on the EntityReference or EntityCollection. for e.g. var cust=context.Contacts.OfType<Customer>().First(); var sq = cust.Reservations.CreateSourceQuery().Where(r => r.ReservationDate > new DateTime(2008,1,1)); cust.Reservations.Attach(sq); This populates only those reservations that are older than Jan 1 2008. This is the only way (in EFv1) to Attach a Range of Entities to a EntityCollection using the Attach() method ================================================================== If you need to get the Foreign Key value for a entity e.g. to get the ContactID value from a Address Entity use this :                                address.ContactReference.EntityKey.EntityKeyValues.Where(k=> k.Key == "ContactID")

    Read the article

  • Stackify Aims to Put More ‘Dev’ in ‘DevOps’

    - by Matt Watson
    Originally published on VisualStudioMagazine.com on 8/22/2012 by Keith Ward.The Kansas City-based startup wants to make it easier for developers to examine the network stack and find problems in code.The first part of “DevOps” is “Dev”. But according to Matt Watson, Devs aren’t connected enough with Ops, and it’s time that changed.He founded the startup company Stackify earlier this year to do something about it. Stackify gives developers unprecedented access to the IT side of the equation, Watson says, without putting additional burden on the system and network administrators who ultimately ensure the health of the environment.“We need a product designed for developers, with the goal of getting them more involved in operations and app support. Now, there’s next to nothing designed for developers,” Watson says. Stackify allows developers to search the network stack to troubleshoot problems in their software that might otherwise take days of coordination between development and IT teams to solve.Stackify allows developers to search log files, configuration files, databases and other infrastructure to locate errors. A key to this is that the developers are normally granted read-only access, soothing admin fears that developers will upload bad code to their servers.Implementation starts with data collection on the servers. Among the information gleaned is application discovery, server monitoring, file access, and other data collection, according to Stackify’s Web site. Watson confirmed that Stackify works seamlessly with virtualized environments as well.Although the data collection software must be installed on Windows servers, it can monitor both Windows and Linux servers. Once collection’s finished, developers have the kind of information they need, without causing heartburn for the IT staff.Stackify is a 100 percent cloud-based service. The company uses Windows Azure for hosting, a decision Watson’s happy with. With Azure, he says, “It’s nice to have all the dev tools like cache and table storage.” Although there have been a few glitches here and there with the service, it’s run very smoothly for the most part, he adds.Stackify is currently in a closed beta, with a public release scheduled for October. Watson says that pricing is expected to be $25 per month, per server, with volume discounts available. He adds that the target audience is companies with at least five developers.Watson founded Stackify after selling his last company, VinSolutions, to AutoTrader.com for “close to $150 million”, according to press accounts. Watson has since  founded the Watson Technology Group, which focuses on angel investing.About the Author: Keith Ward is the editor in chief of Visual Studio Magazine.

    Read the article

  • Ajax Control Toolkit November 2011 Release

    - by Stephen Walther
    I’m happy to announce the November 2011 Release of the Ajax Control Toolkit. This release introduces a new Balloon Popup control and several enhancements to the existing Tabs control including support for on-demand loading of tab content, support for vertical tabs, and support for keyboard tab navigation. We also fixed the top-voted bugs associated with the Tabs control reported at CodePlex.com. You can download the new release by visiting the CodePlex website: http://AjaxControlToolkit.CodePlex.com Alternatively, the fast and easy way to get the latest release of the Ajax Control Toolkit is to use NuGet. Open your Library Package Manager console in Visual Studio 2010 and type: After you install the Ajax Control Toolkit through NuGet, please do a Rebuild of your project (the menu option Build, Rebuild). After you do a Rebuild, the ajaxToolkit prefix will appear in Intellisense: Using the Balloon Popup Control Why a new Balloon Popup control? The Balloon Popup control is the second most requested new feature for the Ajax Control Toolkit according to CodePlex votes: The Balloon Popup displays a message in a balloon when you shift focus to a control, click a control, or hover over a control. You can use the Balloon Popup, for example, to display instructions for TextBoxes which appear in a form: Here’s the code used to create the Balloon Popup: <ajaxToolkit:ToolkitScriptManager ID="tsm1" runat="server" /> <asp:TextBox ID="txtFirstName" Runat="server" /> <asp:Panel ID="pnlFirstNameHelp" runat="server"> Please enter your first name </asp:Panel> <ajaxToolkit:BalloonPopupExtender TargetControlID="txtFirstName" BalloonPopupControlID="pnlFirstNameHelp" BalloonSize="Small" UseShadow="true" runat="server" /> You also can use the Balloon Popup to explain hard to understand words in a text document: Here’s how you display the Balloon Popup when you hover over the link: The point of the conversation was <asp:HyperLink ID="lnkObfuscate" Text="obfuscated" CssClass="hardWord" runat="server" /> by his incessant coughing. <ajaxToolkit:ToolkitScriptManager ID="tsm1" runat="server" /> <asp:Panel id="pnlObfuscate" Runat="server"> To bewilder or render something obscure </asp:Panel> <ajaxToolkit:BalloonPopupExtender TargetControlID="lnkObfuscate" BalloonPopupControlID="pnlObfuscate" BalloonStyle="Cloud" UseShadow="true" DisplayOnMouseOver="true" Runat="server" />   There are four important properties which you need to know about when using the Balloon Popup control: BalloonSize – The three balloon sizes are Small, Medium, and Large. BalloonStyle -- The two built-in styles are Rectangle and Cloud. UseShadow – When true, a drop shadow appears behind the popup. Position – Can have the values Auto, BottomLeft, BottomRight, TopLeft, TopRight. When set to Auto, which is the default, the Balloon Popup will appear where it has the most screen real estate. The following screenshots illustrates how these settings affect the appearance of the Balloon Popup: Customizing the Balloon Popup You can customize the appearance of the Balloon Popup by creating your own Cascading Style Sheet and Sprite. The Ajax Control Toolkit sample site includes a sample of a custom Oval Balloon Popup style: This custom style was created by using a custom Cascading Style Sheet and image. You point the Balloon Popup at a custom Cascading Style Sheet and Cascading Style Sheet class by using the CustomCssUrl and CustomClassName properties like this: <asp:TextBox ID="txtCustom" autocomplete="off" runat="server" /> <br /> <asp:Panel ID="Panel3" runat="server"> This is a custom BalloonPopupExtender style created with a custom Cascading Style Sheet. </asp:Panel> <ajaxToolkit:BalloonPopupExtender ID="bpe1" TargetControlID="txtCustom" BalloonPopupControlID="Panel3" BalloonStyle="Custom" CustomCssUrl="CustomStyle/BalloonPopupOvalStyle.css" CustomClassName="oval" UseShadow="true" runat="server" />   Learn More about the Balloon Popup To learn more about the Balloon Popup control, visit the sample page for the Balloon Popup at the Ajax Control Toolkit sample site: http://www.asp.net/ajaxLibrary/AjaxControlToolkitSampleSite/BalloonPopup/BalloonPopupExtender.aspx Improvements to the Tabs Control In this release, we introduced several important new features for the existing Tabs control. We also fixed all of the top-voted bugs for the Tabs control. On-Demand Loading of Tab Content Here is the scenario. Imagine that you are using the Tabs control in a Web Forms page. The Tabs control displays two tabs: Customers and Products. When you click the Customers tab then you want to see a list of customers and when you click on the Products tab then you want to see a list of products. In this scenario, you don’t want the list of customers and products to be retrieved from the database when the page is initially opened. The user might never click on the Products tab and all of the work to load the list of products from the database would be wasted. In this scenario, you want the content of a tab panel to be loaded on demand. The products should only be loaded from the database and rendered to the browser when you click the Products tab and not before. The Tabs control in the November 2011 Release of the Ajax Control Toolkit includes a new property named OnDemand. When OnDemand is set to the value True, a tab panel won’t be loaded until you click its associated tab. Here is the code for the aspx page: <ajaxToolkit:ToolkitScriptManager ID="tsm1" runat="server" /> <ajaxToolkit:TabContainer ID="tabs" OnDemand="false" runat="server"> <ajaxToolkit:TabPanel HeaderText="Customers" runat="server"> <ContentTemplate> <h2>Customers</h2> <asp:GridView ID="grdCustomers" DataSourceID="srcCustomers" runat="server" /> <asp:SqlDataSource ID="srcCustomers" SelectCommand="SELECT * FROM Customers" ConnectionString="<%$ ConnectionStrings:StoreDB %>" runat="server" /> </ContentTemplate> </ajaxToolkit:TabPanel> <ajaxToolkit:TabPanel HeaderText="Products" runat="server"> <ContentTemplate> <h2>Products</h2> <asp:GridView ID="grdProducts" DataSourceID="srcProducts" runat="server" /> <asp:SqlDataSource ID="srcProducts" SelectCommand="SELECT * FROM Products" ConnectionString="<%$ ConnectionStrings:StoreDB %>" runat="server" /> </ContentTemplate> </ajaxToolkit:TabPanel> </ajaxToolkit:TabContainer> Notice that the TabContainer includes an OnDemand=”True” property. The Tabs control contains two Tab Panels. The first tab panel uses a DataGrid and SqlDataSource to display a list of customers and the second tab panel uses a DataGrid and SqlDataSource to display a list of products. And here is the code-behind for the page: using System; using System.Diagnostics; using System.Web.UI.WebControls; namespace ACTSamples { public partial class TabsOnDemand : System.Web.UI.Page { protected override void OnInit(EventArgs e) { srcProducts.Selecting += new SqlDataSourceSelectingEventHandler(srcProducts_Selecting); } void srcProducts_Selecting(object sender, SqlDataSourceSelectingEventArgs e) { Debugger.Break(); } } } The code-behind file includes an event handler for the Products SqlDataSource Selecting event. The handler breaks into the debugger by calling the Debugger.Break() method. That way, we can know when the Products SqlDataSource actually retrieves the list of products. When the OnDemand property has the value False then the Selecting event handler is called immediately when the page is first loaded. The contents of all of the tabs are loaded (and the contents of the unselected tabs are hidden) when the page is first loaded. When the OnDemand property has the value True then the Selecting event handler is not called when the page is first loaded. The event handler is not called until you click on the Products tab. If you never click on the Products tab then the list of products is never retrieved from the database. If you want even more control over when the contents of a tab panel gets loaded then you can use the TabPanel OnDemandMode property. This property accepts the following three values: None – Never load the contents of the tab panel again after the page is first loaded. Once – Wait until the tab is selected to load the contents of the tab panel Always – Load the contents of the tab panel each and every time you select the tab. There is a live demonstration of the OnDemandMode property here in the sample page for the Tabs control: http://www.asp.net/ajaxLibrary/AjaxControlToolkitSampleSite/Tabs/Tabs.aspx Displaying Vertical Tabs With the November 2011 Release, the Tabs control now supports vertical tabs. To create vertical tabs, just set the TabContainer UserVerticalStripPlacement property to the value True like this: <ajaxToolkit:TabContainer ID="tabs" OnDemand="false" UseVerticalStripPlacement="true" runat="server"> <ajaxToolkit:TabPanel ID="TabPanel1" HeaderText="First Tab" runat="server"> <ContentTemplate> <p> Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </p> </ContentTemplate> </ajaxToolkit:TabPanel> <ajaxToolkit:TabPanel ID="TabPanel2" HeaderText="Second Tab" runat="server"> <ContentTemplate> <p> Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </p> </ContentTemplate> </ajaxToolkit:TabPanel> </ajaxToolkit:TabContainer> In addition, you can use the TabStripPlacement property to control whether the tab strip appears at the left or right or top or bottom of the tab panels: Tab Keyboard Navigation Another highly requested feature for the Tabs control is support for keyboard navigation. The Tabs control now supports the arrow keys and the Home and End keys. In order for the arrow keys to work, you must first move focus to the tab control on the page by either clicking on a tab with your mouse or repeatedly hitting the Tab key. You can try out the new keyboard navigation support by trying any of the demos included in the Tabs sample page: http://www.asp.net/ajaxLibrary/AjaxControlToolkitSampleSite/Tabs/Tabs.aspx Summary I hope that you take advantage of the new Balloon Popup control and the new features which we introduced for the Tabs control. We added a lot of new features to the Tabs control in this release including support for on-demand tabs, support for vertical tabs, and support for tab keyboard navigation. I want to thank the developers on the Superexpert team for all of the hard work which they put into this release.

    Read the article

  • cocos2dx - Custom Fragment Shader and CCRenderTexture

    - by saiy2k
    I have a CCRenderTexture that is filled with a sprite when the scene is loaded, as follows, canvas = CCRenderTexture::create(this->getContentSize().width, this->getContentSize().height); canvas->setPosition(data->position); canvas->beginWithClear(0.0, 0.0, 0.0, 0); this->visit(); canvas->end(); The above code is written within a class, which derives from CCSprite (Hence this). Then, in another function applyShader(), I create a sprite named splat, from the texture of CCRenderTexture *canvas. Thus splat will contain the whole texture of canvas. Now I apply a custom fragment shader to the splat by calling the function splat->renderShader(), which will modify some small portion of the whole texture. Then I draw the modified texture back to the CCRenderTexture *canvas. Hence, applyShader() will * take a texture from CCRenderTexture, * create a sprite based on it, * apply a fragment shader to it * and draw the modified texture back to CCRenderTexture. This applyShader() will be called repetitively and its code is as follows: splat = Splat::createWithTexture(art->canvas->getSprite()->getTexture()); splat->renderShader(); art->canvas->begin(); splat->visit(); art->canvas->end(); My shader code is (nothing fancy) precision mediump float; varying vec2 v_texCoord; uniform sampler2D u_texture; uniform sampler2D u_colorRampTexture; uniform float params[5]; void main() { gl_FragColor = texture2D(u_texture, v_texCoord); return; } So, with the above code I expect the original sprite this to get rendered over and over again without any visual changes. But on each call to applyShader(), the texture is getting stretched a little and the stretched image is getting rendered. After some 10 calls, the image gets so distorted. Can someone please tell me where I am going wrong? Thanks :-) PS: All code shown here is partial, not complete code. Edit: Adding Screens Update: The problem has nothing to do with shaders it seems. It happens even when I dont call renderShader(). The actual lines of code is: splat = Splat::createWithTexture(art->canvas->getSprite()->getTexture()); splat->setPosition( ccp( art->getContentSize().width * 0.5, art->getContentSize().height * 0.5 ) ); splat->setFlipY(true); art->canvas->begin(); splat->visit(); art->canvas->end();

    Read the article

  • April 2013 Release of the Ajax Control Toolkit

    - by Stephen.Walther
    I’m excited to announce the April 2013 release of the Ajax Control Toolkit. For this release, we focused on improving two controls: the AjaxFileUpload and the MaskedEdit controls. You can download the latest release from CodePlex at http://AjaxControlToolkit.CodePlex.com or, better yet, you can execute the following NuGet command within Visual Studio 2010/2012: There are three builds of the Ajax Control Toolkit: .NET 3.5, .NET 4.0, and .NET 4.5. A Better AjaxFileUpload Control We completely rewrote the AjaxFileUpload control for this release. We had two primary goals. First, we wanted to support uploading really large files. In particular, we wanted to support uploading multi-gigabyte files such as video files or application files. Second, we wanted to support showing upload progress on as many browsers as possible. The previous version of the AjaxFileUpload could show upload progress when used with Google Chrome or Mozilla Firefox but not when used with Apple Safari or Microsoft Internet Explorer. The new version of the AjaxFileUpload control shows upload progress when used with any browser. Using the AjaxFileUpload Control Let me walk-through using the AjaxFileUpload in the most basic scenario. And then, in following sections, I can explain some of its more advanced features. Here’s how you can declare the AjaxFileUpload control in a page: <ajaxToolkit:ToolkitScriptManager runat="server" /> <ajaxToolkit:AjaxFileUpload ID="AjaxFileUpload1" AllowedFileTypes="mp4" OnUploadComplete="AjaxFileUpload1_UploadComplete" runat="server" /> The exact appearance of the AjaxFileUpload control depends on the features that a browser supports. In the case of Google Chrome, which supports drag-and-drop upload, here’s what the AjaxFileUpload looks like: Notice that the page above includes two Ajax Control Toolkit controls: the AjaxFileUpload and the ToolkitScriptManager control. You always need to include the ToolkitScriptManager with any page which uses Ajax Control Toolkit controls. The AjaxFileUpload control declared in the page above includes an event handler for its UploadComplete event. This event handler is declared in the code-behind page like this: protected void AjaxFileUpload1_UploadComplete(object sender, AjaxControlToolkit.AjaxFileUploadEventArgs e) { // Save uploaded file to App_Data folder AjaxFileUpload1.SaveAs(MapPath("~/App_Data/" + e.FileName)); } This method saves the uploaded file to your website’s App_Data folder. I’m assuming that you have an App_Data folder in your project – if you don’t have one then you need to create one or you will get an error. There is one more thing that you must do in order to get the AjaxFileUpload control to work. The AjaxFileUpload control relies on an HTTP Handler named AjaxFileUploadHandler.axd. You need to declare this handler in your application’s root web.config file like this: <configuration> <system.web> <compilation debug="true" targetFramework="4.5" /> <httpRuntime targetFramework="4.5" maxRequestLength="42949672" /> <httpHandlers> <add verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </httpHandlers> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <handlers> <add name="AjaxFileUploadHandler" verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </handlers> <security> <requestFiltering> <requestLimits maxAllowedContentLength="4294967295"/> </requestFiltering> </security> </system.webServer> </configuration> Notice that the web.config file above also contains configuration settings for the maxRequestLength and maxAllowedContentLength. You need to assign large values to these configuration settings — as I did in the web.config file above — in order to accept large file uploads. Supporting Chunked File Uploads Because one of our primary goals with this release was support for large file uploads, we added support for client-side chunking. When you upload a file using a browser which fully supports the HTML5 File API — such as Google Chrome or Mozilla Firefox — then the file is uploaded in multiple chunks. You can see chunking in action by opening F12 Developer Tools in your browser and observing the Network tab: Notice that there is a crazy number of distinct post requests made (about 360 distinct requests for a 1 gigabyte file). Each post request looks like this: http://localhost:24338/AjaxFileUploadHandler.axd?contextKey={DA8BEDC8-B952-4d5d-8CC2-59FE922E2923}&fileId=B7CCE31C-6AB1-BB28-2940-49E0C9B81C64 &fileName=Sita_Sings_the_Blues_480p_2150kbps.mp4&chunked=true&firstChunk=false Each request posts another chunk of the file being uploaded. Notice that the request URL includes a chunked=true parameter which indicates that the browser is breaking the file being uploaded into multiple chunks. Showing Upload Progress on All Browsers The previous version of the AjaxFileUpload control could display upload progress only in the case of browsers which fully support the HTML5 File API. The new version of the AjaxFileUpload control can display upload progress in the case of all browsers. If a browser does not fully support the HTML5 File API then the browser polls the server every few seconds with an Ajax request to determine the percentage of the file that has been uploaded. This technique of displaying progress works with any browser which supports making Ajax requests. There is one catch. Be warned that this new feature only works with the .NET 4.0 and .NET 4.5 versions of the AjaxControlToolkit. To show upload progress, we are taking advantage of the new ASP.NET HttpRequest.GetBufferedInputStream() and HttpRequest.GetBufferlessInputStream() methods which are not supported by .NET 3.5. For example, here is what the Network tab looks like when you use the AjaxFileUpload with Microsoft Internet Explorer: Here’s what the requests in the Network tab look like: GET /WebForm1.aspx?contextKey={DA8BEDC8-B952-4d5d-8CC2-59FE922E2923}&poll=1&guid=9206FF94-76F9-B197-D1BC-EA9AD282806B HTTP/1.1 Notice that each request includes a poll=1 parameter. This parameter indicates that this is a polling request to get the size of the file buffered on the server. Here’s what the response body of a request looks like when about 20% of a file has been uploaded: Buffering to a Temporary File When you upload a file using the AjaxFileUpload control, the file upload is buffered to a temporary file located at Path.GetTempPath(). When you call the SaveAs() method, as we did in the sample page above, the temporary file is copied to a new file and then the temporary file is deleted. If you don’t call the SaveAs() method, then you must ensure that the temporary file gets deleted yourself. For example, if you want to save the file to a database then you will never call the SaveAs() method and you are responsible for deleting the file. The easiest way to delete the temporary file is to call the AjaxFileUploadEventArgs.DeleteTemporaryData() method in the UploadComplete handler: protected void AjaxFileUpload1_UploadComplete(object sender, AjaxControlToolkit.AjaxFileUploadEventArgs e) { // Save uploaded file to a database table e.DeleteTemporaryData(); } You also can call the static AjaxFileUpload.CleanAllTemporaryData() method to delete all temporary data and not only the temporary data related to the current file upload. For example, you might want to call this method on application start to ensure that all temporary data is removed whenever your application restarts. A Better MaskedEdit Extender This release of the Ajax Control Toolkit contains bug fixes for the top-voted issues related to the MaskedEdit control. We closed over 25 MaskedEdit issues. Here is a complete list of the issues addressed with this release: · 17302 MaskedEditExtender MaskType=Date, Mask=99/99/99 Undefined JS Error · 11758 MaskedEdit causes error in JScript when working with 2-digits year · 18810 Maskededitextender/validator Date validation issue · 23236 MaskEditValidator does not work with date input using format dd/mm/yyyy · 23042 Webkit based browsers (Safari, Chrome) and MaskedEditExtender · 26685 MaskedEditExtender@(ClearMaskOnLostFocus=false) adds a zero character when you each focused to target textbox · 16109 MaskedEditExtender: Negative amount, followed by decimal, sets value to positive · 11522 MaskEditExtender of AjaxtoolKit-1.0.10618.0 does not work properly for Hungarian Culture · 25988 MaskedEditExtender – CultureName (HU-hu) > DateSeparator · 23221 MaskedEditExtender date separator problem · 15233 Day and month swap in Dynamic user control · 15492 MaskedEditExtender with ClearMaskOnLostFocus and with MaskedEditValidator with ClientValidationFunction · 9389 MaskedEditValidator – when on no entry · 11392 MaskedEdit Number format messed up · 11819 MaskedEditExtender erases all values beyond first comma separtor · 13423 MaskedEdit(Extender/Validator) combo problem · 16111 MaskedEditValidator cannot validate date with DayMonthYear in UserDateFormat of MaskedEditExtender · 10901 MaskedEdit: The months and date fields swap values when you hit submit if UserDateFormat is set. · 15190 MaskedEditValidator can’t make use of MaskedEditExtender’s UserDateFormat property · 13898 MaskedEdit Extender with custom date type mask gives javascript error · 14692 MaskedEdit error in “yy/MM/dd” format. · 16186 MaskedEditExtender does not handle century properly in a date mask · 26456 MaskedEditBehavior. ConvFmtTime : function(input,loadFirst) fails if this._CultureAMPMPlaceholder == “” · 21474 Error on MaskedEditExtender working with number format · 23023 MaskedEditExtender’s ClearMaskOnLostFocus property causes problems for MaskedEditValidator when set to false · 13656 MaskedEditValidator Min/Max Date value issue Conclusion This latest release of the Ajax Control Toolkit required many hours of work by a team of talented developers. I want to thank the members of the Superexpert team for the long hours which they put into this release.

    Read the article

  • Ldap ssh authentication is super slow... any way to speed it up?

    - by Johnathon
    I am running OpenSUSE. Here is the output of ssh -vvv: OpenSSH_5.8p1, OpenSSL 1.0.0c 2 Dec 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to <ipaddress> [ipaddress] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug3: Incorrect RSA1 identifier debug3: Could not load "/root/.ssh/id_rsa" as a RSA1 public key debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_rsa-cert type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: identity file /root/.ssh/id_dsa-cert type -1 debug1: identity file /root/.ssh/id_ecdsa type -1 debug1: identity file /root/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1 debug1: match: OpenSSH_5.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "ipaddress" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 138/256 debug2: bits set: 529/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA cb:7f:ff:2e:65:28:f0:95:e6:8a:71:24:2a:67:02:2b debug3: load_hostkeys: loading entries for host "<ipaddress>" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug1: Host '<ipaddress>' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:4 debug2: bits set: 504/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/id_rsa (0xb789d5c8) debug2: key: /root/.ssh/id_dsa ((nil)) debug2: key: /root/.ssh/id_ecdsa ((nil)) debug1: Authentications that can continue: publickey,keyboard-interactive debug3: start over, passed a different list publickey,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /root/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply It hangs here for a good 30 seconds to a minute then debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /root/.ssh/id_dsa debug3: no such identity: /root/.ssh/id_dsa debug1: Trying private key: /root/.ssh/id_ecdsa debug3: no such identity: /root/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 I added PubkeyAuthentication no to the /etc/ssh/ssh_config and the /etc/ssh/sshd_config which makes it faster getting to the password prompt, but the password prompt still takes some time. Any way to fix that? Here is where the password hangs debug3: packet_send2: adding 32 (len 25 padlen 7 extra_pad 64) debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 0 debug3: packet_send2: adding 48 (len 10 padlen 6 extra_pad 64) debug1: Authentication succeeded (keyboard-interactive). Authenticated to ipaddress ([ipaddress]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. FIXED!!!!!!!!!!!!!! What is did... In the nsswitch_conf I had ldap included in the group and passwd which slows it down a lot. Thank you everybody for your input passwd: compat group: files hosts: files dns networks: files dns

    Read the article

  • NINE Questions with Michelle Juett

    - by NINEQuestions
    Michelle Juett is one of the more interesting people I know, even though we’ve never met face to face. She’s part artist, part techie and all cool. We “met” via my good buddy George Clingerman and have plotting to take over the world, errr… I mean “collaborating” ever since. If you happen to live in the Seattle area, you can catch her and her work at Sakura Con on April 2-4, 2010 and various other gamer and art cons throughout the year. You can also find her on Twitter as @Shelldragon. Now that you know a little bit, I’ll let her tell you the rest of the story in these NINE Questions: 1. Where are you from? I was born in Clearwater, Florida. I like to tell people I'm from the Bermuda Triangle, it just makes explaining myself so much easier. My family moved to Washington when I was 5 and I've been in the Pacific Northwest ever since. We like to QQ about the rain but we really love the green trees and clean water. 2. What do you do? I fight evil by moonlight and win love by daylight.. or something like that.  I’ve been in quality assurance for games during the day since January 2008 and an artist for life. I currently work in QA for a really awesome game company in Bellevue.  At home, I work on personal digital art, making game assets as well as other random freelance projects as they pop up. 3. How did you get to where you are now? I'm still not where I want to be but I'm getting closer. The biggest piece of advice I can give is to work hard and never settle for the minimum required. I tend to overwork myself but I've never regretted it. You can want something really bad but if you aren't willing to work for it, then you can't expect it to just happen. I've always drawn and had an unhealthy love for video games that I was told I’d grow out of.  I knew I would not ‘grow out’ of games and that real adults make them and I could too. After I graduated, in searching for jobs, I discovered game testing. I figured this would be a good way to get my foot in the door and start networking. I’ve worked with consoles, websites and now, PC games.  I stuck with my journey, although it has been a rocky one, daylighting as a tester and moonlighting as an artist. I'm still on that journey but I wouldn't have it any other way. Test has given me a perspective that is difficult, if not impossible, to obtain any other way. It gives an unconditional respect for other hard working testers and an insight into creative problem solving. 4. So video game testing probably sounds WAY cooler than the reality. What's it like? What's a given day for you? Game testers don't get a lot of respect because of their stigmas and the fact most people don't actually know what we do.  People hear about the opening and closing disc trays all day. Many places do treat their testers like numbers. It all depends on where you work and how awesome your company is. I've had to deal with a lot of bad work situations to get to a really good one. QA exists to ensure the game is as flawless and enjoyable as it can be by the time it has to leave the nest and go out into the world. This includes everything obvious: “can I beat the level and save the princess?” to the more obscure: ‘What happens when I lose internet connection while trying to save right before falling into a pit to my death while holding the jump key then my cat pulls out my memory card and hides it in her litter box?” On the dev side, for developers, testers can be very scary people. Especially when the test team is not in house and you can’t see each other’s faces.  I've seen both sides. We don't mean to hurt your feelings. We really DO love you and want your game to be the best it can be! It can be some serious tough love. 5. You are also an accomplished artist. Got any major projects right now you'd like to talk about? LOL, I don't know if I’d say I'm an accomplished artist just yet. I’m still a long way from where I want to be. I figure that’s what makes you grow though: the desire to never stop improving. I like QA but I want to be a full time artist. I was lucky enough to register for a table at Sakura Con in the 11 second window that the tables sold out. As such, I’ll be selling my wares in the Artist Alley April 2-4th. Part of preparing for this is actually making the art to be sold there. Anime is a fun pass time but I don’t draw a whole lot of it so I’m making up for lost time. As I seem to enjoy burying myself in work, I’m an art lead for a secret project that’s so secret I might be killed tonight for even mentioning it. I also take on various freelance projects and do what I can to help out indie games. I discovered the XNA community a year and a half ago and developed a love for Indies when I was writing a weekly newsletter on XBLA news. I’m a little late to the party but I find myself in a unique position where I am an artist and also have technical skills in games. While not programmer myself, I have a lot of game sense and experience. I hope to make some awesome happen. Lastly, I have an ongoing web comic Shell’s Angels) that tends to get neglected when I get busy. I still love drawing comics and keep a little book with me to sketch down ideas as they pop into my head. I may pick it back up again as a larger project sometime in the future. 6. Can you talk about any of the other freelance projects you're doing or are you sworn to secrecy on those too? We wouldn't want a team of game developer ninjas to take you out or anything. All my projects are currently 2d. I have personal projects such as the ongoing comic as well as a graphic novel I've been picking at here and there. My main focus until April is Sakura Con, Sakura Con, Sakura Con.  I see it as a great way to get exposure and convention experience. I found out I love conventions a couple years ago and I want to get more involved in them. 7. As an artist, what is your weapon of choice? What do you use to get most of your stuff done? I am a Photoshop Hero and I have the hoodie to prove it. (http://www.pennyarcademerch.com/pah090011.html) I've dabbled in other paint programs but I always gravitate back to Photoshop. She is my one true love. I'd like to learn programs like Flash or Anime Studio when I get a bit more time because of their animation abilities. I've worked on frame by frame animation forever but I would love to learn 2d rigging. Still, nothing can compare to a simple sketchpad and a pencil. I always have one on me in case I come across or think of something interesting and can't get to a computer. If the Courier ever comes to exist it will be an ideal weapon for me. 8. You did some videos too, depicting the art creation process. What was the motivation behind those? The creative process is just as important as the final product, if not more so.  I've always loved watching speed paint videos and wanted to try it out myself. Turns out it's a lot of work and time but it's definitely fun to go back and rewatch them. Art isn't always the end result and is more often the process itself. 9. Got any interesting tattoos? Designed any for yourself or other people? Not yet, but not for lack of desire. I've toiled over what and where for years. Last year, I finally decided the back of my shoulders would be the place. Like anything permanent, I want it to have meaning. I thought of somehow incorporating games but I couldn't find something I felt would stand the test of time even with all the classic sprite games. I'm very picky so we'll see if I can get something solid decided. Come see me at Sakura Con April 2 -4!!!

    Read the article

  • Parallelism in .NET – Part 8, PLINQ’s ForAll Method

    - by Reed
    Parallel LINQ extends LINQ to Objects, and is typically very similar.  However, as I previously discussed, there are some differences.  Although the standard way to handle simple Data Parellelism is via Parallel.ForEach, it’s possible to do the same thing via PLINQ. PLINQ adds a new method unavailable in standard LINQ which provides new functionality… LINQ is designed to provide a much simpler way of handling querying, including filtering, ordering, grouping, and many other benefits.  Reading the description in LINQ to Objects on MSDN, it becomes clear that the thinking behind LINQ deals with retrieval of data.  LINQ works by adding a functional programming style on top of .NET, allowing us to express filters in terms of predicate functions, for example. PLINQ is, generally, very similar.  Typically, when using PLINQ, we write declarative statements to filter a dataset or perform an aggregation.  However, PLINQ adds one new method, which provides a very different purpose: ForAll. The ForAll method is defined on ParallelEnumerable, and will work upon any ParallelQuery<T>.  Unlike the sequence operators in LINQ and PLINQ, ForAll is intended to cause side effects.  It does not filter a collection, but rather invokes an action on each element of the collection. At first glance, this seems like a bad idea.  For example, Eric Lippert clearly explained two philosophical objections to providing an IEnumerable<T>.ForEach extension method, one of which still applies when parallelized.  The sole purpose of this method is to cause side effects, and as such, I agree that the ForAll method “violates the functional programming principles that all the other sequence operators are based upon”, in exactly the same manner an IEnumerable<T>.ForEach extension method would violate these principles.  Eric Lippert’s second reason for disliking a ForEach extension method does not necessarily apply to ForAll – replacing ForAll with a call to Parallel.ForEach has the same closure semantics, so there is no loss there. Although ForAll may have philosophical issues, there is a pragmatic reason to include this method.  Without ForAll, we would take a fairly serious performance hit in many situations.  Often, we need to perform some filtering or grouping, then perform an action using the results of our filter.  Using a standard foreach statement to perform our action would avoid this philosophical issue: // Filter our collection var filteredItems = collection.AsParallel().Where( i => i.SomePredicate() ); // Now perform an action foreach (var item in filteredItems) { // These will now run serially item.DoSomething(); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This would cause a loss in performance, since we lose any parallelism in place, and cause all of our actions to be run serially. We could easily use a Parallel.ForEach instead, which adds parallelism to the actions: // Filter our collection var filteredItems = collection.AsParallel().Where( i => i.SomePredicate() ); // Now perform an action once the filter completes Parallel.ForEach(filteredItems, item => { // These will now run in parallel item.DoSomething(); }); This is a noticeable improvement, since both our filtering and our actions run parallelized.  However, there is still a large bottleneck in place here.  The problem lies with my comment “perform an action once the filter completes”.  Here, we’re parallelizing the filter, then collecting all of the results, blocking until the filter completes.  Once the filtering of every element is completed, we then repartition the results of the filter, reschedule into multiple threads, and perform the action on each element.  By moving this into two separate statements, we potentially double our parallelization overhead, since we’re forcing the work to be partitioned and scheduled twice as many times. This is where the pragmatism comes into play.  By violating our functional principles, we gain the ability to avoid the overhead and cost of rescheduling the work: // Perform an action on the results of our filter collection .AsParallel() .Where( i => i.SomePredicate() ) .ForAll( i => i.DoSomething() ); The ability to avoid the scheduling overhead is a compelling reason to use ForAll.  This really goes back to one of the key points I discussed in data parallelism: Partition your problem in a way to place the most work possible into each task.  Here, this means leaving the statement attached to the expression, even though it causes side effects and is not standard usage for LINQ. This leads to my one guideline for using ForAll: The ForAll extension method should only be used to process the results of a parallel query, as returned by a PLINQ expression. Any other usage scenario should use Parallel.ForEach, instead.

    Read the article

  • A few things I learned regarding Azure billing policies

    - by Vincent Grondin
    An hour of small computing time: 0,12$ per hour A Gig of storage in the cloud: 0,15$ per hour 1 Gig of relational database using Azure SQL: 9,99$  per month A Visual Studio Professional with MSDN Premium account: 2500$ per year Winning an MSDN Professional account that comes preloaded with 750 free hours of Azure per month:  PRICELESS !!!      But was it really free???? Hmmm… Let’s see.....   Here's a few things I learned regarding Azure billing policies when I attended a promotional training at Microsoft last week...   1)  An instance deployed in the cloud really means whatever you upload in there... it doesn't matter if it's in STAGING OR PRODUCTION!!!!   Your MSDN account comes with 750 free hours of small computing time per month which should be enough hours per month for one instance of one application deployed in the cloud...  So we're cool, the application you run in the cloud doesn't cost you a penny....  BUT the one that's in staging is still consuming time!!!   So if you don’t want to end up having to pay 42$ at the end of the month on your credit card like this happened to a friend of mine, DELETE them staging applications once you’ve put them in production! This also applies to the instance count you can modify in the configuration file… So stop and think before you decide you want to spawn 50 of those hello world apps  .     2) If you have an MSDN account, then you have the promotional 750 hours of Azure credits per month and can use the Azure credits to explore the Cloud! But be aware, this promotion ends in 8 months (maybe more like 7 now) and then you will most likely go back to the standard 250 hours of Azure credits. If you do not delete your applications by then, you’ll get billed for the extra hours, believe me…   There is a switch that you can toggle and which will STOP your automatic enrollment after the promotion and prevent you from renewing the Azure Account automatically. Yes the default setting is to automatically renew your account and remember, you entered your credit card information in the registration process so, yes, you WILL be billed…  Go disable that ASAP    Log into your account, go to “Windows Azure Platform” then click the “Subscriptions” tab and on the right side, you’ll see a drop down with different “Actions” into it… Choose “Opt out of auto renew” and, NOW you’re safe…   Still, this is a great offer by Microsoft and I think everyone that has a chance should play a bit with Azure to get to know this technology a bit more...     Happy Cloud Computing All

    Read the article

< Previous Page | 947 948 949 950 951 952 953 954 955 956 957 958  | Next Page >