Search Results

Search found 34826 results on 1394 pages for 'valid html'.

Page 952/1394 | < Previous Page | 948 949 950 951 952 953 954 955 956 957 958 959  | Next Page >

• Setting MTU on Exalogic

  - by csoto

  For many reasons, a system administrator may want to change the MTU settings of a server. But in a system like Exalogic which contains lots of interconnected nodes and other various components, it's important to understand how this applies to the different networks. For example, when bringing up bonding of InfiniBand an error like the following may be thrown: Bringing up interface bond1: SIOCSIFMTU: Invalid argument Both scripts ifcfg-ib0 and ifcfg-ib1 (from the /etc/sysconfig/network-scripts/ direectory) have MTU set to 65500, which is a valid MTU value only if all IPoIB slaves operate in connected mode and are configured with the same value, so the line below must be added to both network scripts and then restart the network: CONNECTED_MODE=yes By the way, an error of the form “SIOCSIFMTU: Invalid argument” indicates that the requested MTU was rejected by the kernel. Typically this would be due to it exceeding the maximum value supported by the interface hardware. In that case you must either reduce the MTU to a value that is supported or obtain more capable hardware. This problem has been seen when trying to modify the MTU using the ifconfig command, like the output of the example below: [root@elxxcnxx ~]# ifconfig ib1 mtu 65520 SIOCSIFMTU: Invalid argument It's important to insist that in most cases the nodes must be rebooted after the MTU size has been changed. Although in some circumstances it may work without a reboot, it is not how it is typically documented. Now, in order to achieve a reduced memory consumption and improve performance for network traffic received on IPoIB related interfaces, it is recommend to reduce the MTU value in interface configuration files for IPoIB related bonds from 65520 to 64000. The change needs to be made to interface configuration files under the /etc/sysconfig/network-scripts directory and applies to the interface configuration files for bonds over IPoIB related slave devices, for example /etc/sysconfig/network-scripts/ifcfg-bond1. However, keep in mind that the numeric portion of the interface filenames that corresponding to IPoIB interfaces is expected to vary across compute nodes and vServers and so cannot be relied upon to identify which interface files are for bonds are over IPoIB rather than EoIB related slave interfaces. To fix these MTU values to the recommended settings, there are very useful instructions and a script on the MOS Note 1624434.1, and it's applicable physical and virtual configurations of Exalogic. Regarding the recommended MTU value for EoIB related interfaces, its maximum appropriate value is 1500. If for some reason a vServer has been created with a higher value (set on the /etc/sysconfig/network-scripts/ifcfg-bond0 file), then it must be fixed. An error like the following could be thrown under this circumstance: [root@vServer ~]# service network restart ... Bringing up interface bond0:  SIOCSIFMTU: Invalid argument Also an error like the one below can be seen on the /var/log/messages file of the vServer: kernel: T5074835532 [mlx4_vnic] eth1:vnic_change_mtu:360: failed: new_mtu 64000 2026 The MOS Note 1611657.1 is very useful for this purpose.

  Read the article

• Unknown C# keywords: params

  - by Chris Skardon

  Often overlooked, and (some may say) unloved, is the params keyword, but it’s an awesome keyword, and one you should definitely check out. What does it do? Well, it lets you specify a single parameter that can have a variable number of arguments. You what? Best shown with an example, let’s say we write an add method: public int Add(int first, int second) { return first + second; } meh, it’s alright, does what it says on the tin, but it’s not exactly awe-inspiring… Oh noes! You need to add 3 things together??? public int Add(int first, int second, int third) { return first + second + third; } oh yes, you code master you! Overloading a-plenty! Now a fourth… Ok, this is starting to get a bit ridiculous, if only there was some way… public int Add(int first, int second, params int[] others) { return first + second + others.Sum(); } So now I can call this with any number of int arguments? – well, any number > 2..? Yes! int ret = Add(1, 2, 3); Is as valid as: int ret = Add(1, 2, 3, 4); Of course you probably won’t really need to ever do that method, so what could you use it for? How about adding strings together? What about a logging method? We all know ToString can be an expensive method to call, it might traverse every node on a class hierarchy, or may just be the name of the type… either way, we don’t really want to call it if we can avoid it, so how about a logging method like so: public void Log(LogLevel level, params object[] objs) { if(LoggingLevel < level) return; StringBuilder output = new StringBuilder(); foreach(var obj in objs) output.Append((obj == null) ? "null" : obj.ToString()); return output; } Now we only call ‘ToString’ when we want to, and because we’re passing in just objects we don’t have to call ToString if the Logging Level isn’t what we want… Of course, there are a multitude of things to use params for…

  Read the article

• How to customize web app template admintasia? [closed]

  - by Balaji

  The below is my requirement, Login page Login page for all To search whether a user-id & password are a valid or not. To identify whether the user is of which category, namely, Admin, Manager, User. Redirect the page accordingly for respective user with their privilege. Admin - Manager – User Forgot password, Get username of email address and send the credential by validating the user input. Login & Operations Admin Display all submitted forms by admin, manager and user Tabs – Submissions, Mange form & Manage users. Submissions There must be a ‘sort’, listing, admin, manager and user. Username column should hyper link to edit the user account There must be a ‘sort’ option as ‘ALL’ while this option is chosen; the admin must be capable to view, as below, If Admin selects ‘admin’ from dropdown all submitted forms by admin user accounts should display and this operation is similar for the manager account as above. Manage forms, Agent Name, Credit Site, Lenders, Type of Loan, No Scores and Type Of Card Add, edit, update, delete Active and inactive Always display active records. Manage users, Create a user, User account type, (Admin or Manager or User) User email option Edit & update user, Change username Prompt: are you sure? Change password Prompt: are you sure? Delete user Prompt: are you sure you want to delete? Edit – value – this value should be updated in the common form used by all type of users. Manager Display all submitted forms by managers and users. Submissions and Manage users, Submissions Operations Admin Create filter values, admin, manager and user. Edit - filter values, admin, manager and user. Delete filter values, admin, manager and user. View. Manager Create a user only. View forms. User view and/ or submit form only Logout Log out for all. Prompt: Are you sure you want to log-out. I have downloaded adminstasia. How do I customize this template for the above requirement? The installation is same alike if you check this URL, http://www.admintasia.com/demo/

  Read the article

• PL/SQL to delete invalid data from token Strings

  - by Jie Chen

  Previous article describes how to delete the duplicated values from token string in bulk mode. This one extends it and shows the way to delete invalid data. Scenario Support we have page_two and manufacturers tables in database and the table DDL is: SQL> desc page_two; Name NULL? TYPE ----------------------------------------- -------- ------------------------ MULTILIST04 VARCHAR2(765) SQL> SQL> desc manufacturers; Name NULL? TYPE ----------------------------------------- -------- ------ ID NOT NULL NUMBER NAME VARCHAR In table page_two, column multilist04 stores a token string splitted with common. Each token represent a valid ID in manufacturers table. My expectation is to delete invalid token strings from page_two.multilist04, which have no mapping id in manufacturers.id. For example in below SQL result: ,6295728,33,6295729,6295730,6295731,22, , value 33 and 22 are invalid data because there is no ID equals to 33 or 22 in manufacturers table. So I need to delete 33 and 22. SQL> col rowid format a20; SQL> col multilist04 format a50; SQL> select rowid, multilist04 from page_two; ROWID MULTILIST04 -------------------- -------------------------------------------------- AAB+UrADfAAAAhUAAI ,6295728,6295729,6295730,6295731, AAB+UrADfAAAAhUAAJ ,1111,6295728,6295729,6295730,6295731, AAB+UrADfAAAAhUAAK ,6295728,111,6295729,6295730,6295731, AAB+UrADfAAAAhUAAL ,6295728,6295729,6295730,6295731,22, AAB+UrADfAAAAhUAAM ,6295728,33,6295729,6295730,6295731,22, SQL> select id, encode_name from manufacturers where id in (1111,11,22,33); No rows selected SQL> Solution As there is no existing SPLIT function or related in PL/SQL, I should program it by myself. I code Split intermediate function which is used to get the token value between current splitter and next splitter. Next program is main entry point, it get each column value from page_two.multilist04, process each row based on cursor. When it get each multilist04 value, it uses above Split function to get each token string stored to singValue variant, then check if it exists in manufacturers.id. If not found, set fixFlag to 1, pending to be deleted.

  Read the article

• Why can't I install Microsoft Office 2007 in Ubuntu 11.04?

  - by DK new

  I am very new to Ubuntu and only just getting a hang of it, and my questions might sound stupid especially because I am a learner in terms of techie things as well. So because of the nature of work where everyone uses stupid Windows and Microsoft, I need to have access to MS Office 2007/2010 as documents with too many tables or images open all haywire in Libre Office (which has otherwise been great!). I have been reading up about installing MS Office through WINE/PlayonLinux, but have been unsuccessful so far. I downloaded a MS Office 2007 package from Pirate Bay, which I extracted into a folder. I tried numerous different ways to install through WINE and PlayonLinux, but will discuss the one which seems to be getting me somewhere. http://www.webupd8.org/2011/01/how-to-install-microsoft-office-2007-in.html ..... Initially, when I would click on the install button of MS Office, I get a message saying "The install location you selected does not have 1558MB free space. Free up space from the selected install location or choose a different install location". The install location in this case said "C:\Program Files\Microsoft Office", which confused me as I don't have drives named as C, Z etc. I went to configure WINE and under the drives tab, created a drive named A with the path location /media/cd025f16-433b-4a90-abb6-bb7a025d0450/. Also the space thing is confusing as I have at least 450GB of unused space on my computer. anyways, when I selected the A drive for installation, the installation starts, but soon I get the following error message, "Office cannot find Office.en-us\OfficeLR.Cab. Browse to a valid installation source" .... The part saying "OfficeLR.Cab" have said different things after the Office bit every time I have made an attempt. When I select the Office.en-us sub-folder or any other folder within the folder where MS Office 2007 is saved, it says "invalid source"! I have been trying to get this sorted since 15hrs now (addictive!) and have learnt loads of things in the process, but have not managed to crack it. It might be something stupidly simple I am not aware off that is stopping it. I would really appreciate some help! Thanks a lot.. Also I am still getting used to the language, so might have many questions Also I am using Ubuntu 11.04 (tag 11.04). Also I think I don't have windows -- when my friend installed Ubuntu on my new laptop which had Windows 7, he was trying to keep windows in a separate partition, but something happened and windows was not there! Looking forward to some support! Again thanks a lot

  Read the article

• What do I do when my offer letter is revoked? [closed]

  - by user-1134

  I was recently contacted for an interview by, I'd say, a top 20 tech company. I aced the technical interview and was offered an internship for the summer. I was very excited about this prospect and was very prompt in submitting required documents and forms. This was not my only offer for the summer, so I let them know I needed some time to consider. I asked if I could have two weeks and they said that was fine. Meanwhile I evaluated my 3 options. I asked the respective parties about the projects I'd be working on, work life, how hours and pay worked, housing, etc. I asked about salary and the relocation stipend. Of the three offers, this offer paid the lowest, but not poorly by any means. I inquired about the wage, challanging with a higher wage request. They declined, so, I inquired about the relocation stipend, reminding them I was coming from over seas. The recruiter said he had to check and see if they could adjust the stipend since it was originally calculated from my home address. When he got back to me, he made up some story about how after "countering their offer several times", they were implying that I was declining their offer and my the offer letter was now voided! This [more than] shocked me. I've never run into this situation before. Further, they had already presented me with a signed offer letter which stated the details of the offer, including that it was valid until date X (in the future). I immediately explained I was not countering their offer, but simply trying to evaluate all my options for the summer. I asked kindly for them to allow me the original two weeks we had agreed upon. As expected, they rejected and declined to speak with me regarding the.. misunderstanding. Is this legal? Has anyone encountered this before? Did I do something wrong? What can I do to avoid this in the future?

  Read the article

• Collaborative work (small team) - Best practices

  - by LEM01

  I'm currently working in a very small team of programmers (2-3) and I'm looking for advices/best practices on how to organise our work. We're all working on the same application using PHP. Today we're kind of all working on our way. Today situation: List item that have to be worked on by each dev 1/week. What has to be done is defined at a high functional level (ex: Build the search engine for this product..) Commit / merge our individual branches (git) every week before the next meeting No real dev rules, no code review No test written (aouutch) Problems faced: Code quality issue: discovering someone else code is sometime tough (inline, variable+function+class names, spaces, comments..) Changes in already existing classes (impact on someone else work) Responsibility of each dev unclear: after getting someone else code and discover something messy, should I make the change? Should he make the change? How to plan those things,... What I'm looking for: Basically I'm looking into structuring the way we develop things in order to avoid frustration and improve overall quality. How to define coding standards (naming convention, code rules...)? Do you you any validation script to make sure code is valid before committing? Do you think that defining an architect role in the team is needed? Someone that would actually define what has to be developed during the next phase. By defining interfaces or class descriptions that have to be written. (Does it make sense in such a small team?) Today we're losing time into understanding what others did or tried to do, we're also losing time in discussion like "you should have done it that way! Why is this class doing that and not that..? Shouldn't we have a embedded class rather that this set of data...". I'm looking into a work process, maybe with more defined responsibilities and process in order to improve our performance. If you have experience, advices, best practices or anything to share that we could benefit from it will be much appreciated! Thanks a lot for your time!

  Read the article

• The Problem Should Define the Process, Not the Tool

  - by thatjeffsmith

  All around awesome tool, but not the only gadget in your toolbox.I’m stepping down from my SQL Developer pulpit today and standing up on my philosophical soap box. I’m frequently asked to help folks transition from one set of database tools over to Oracle SQL Developer, which I’m MORE than happy to do. But, I’m not looking to simply change the way people interact with Oracle database. What I care about is your productivity. Is there a faster, more efficient way for you to connect the dots, get from A to B, or just get home to your kids or to the pub for happy hour? If you have defined a business process around a specific tool, what happens when that tool ‘goes away?’ Does the business stop? No, you feel immediate pain until you are able to re-implement the process using another mechanism. Where I get confused, or even frustrated, is when someone asks me to redesign our tool to match their problem. Tools are just tools. Saying you ‘can’t load your data anymore because XYZ’ isn’t valid when you could easily do that same task via SQL*Loader, Create Table As Selects, or 9 other different mechanisms. Sometimes changes brings opportunity for improvement in the process. Don’t be afraid to step back and re-evaluate a problem with a fresh set of eyes. Just trying to replicate your process in another tool exactly as it was done in the ‘old tool’ doesn’t always make sense. Quick sidebar: scheduling a Windows program to kick off thousands if not millions of table inserts from Excel versus using a ‘proper’ server process using SQL*Loader and or external tables means sacrificing scalability and reliability for convenience. Don’t let old habits blind you to new solutions and possibilities. Of couse I’m not going to sit here and say that our tools aren’t deficient in some areas or can’t be improved upon. But I bet if we work together we can find something that’s not only better for the business, but is also better for you. What do you ‘miss’ since you’ve started using SQL Developer as your primary Oracle database tools? I’d love to start a thread here and share ideas on how we can better serve you and your organizations needs. The end solution might not look exactly what you have in mind starting out, but I had no idea I’d be a Product Manager when I started college either What can you no longer ‘do’ since you picked up SQL Developer? What hurts more than it should? What keeps you from being great versus just good?

  Read the article

• 'Unable to mount Filesystem' Error

  - by Charles

  Trying to extract data from a 'bricked' Western Digital MyBook Live 2tb drive. I came across a forum that advised to use Ubuntu (booted from a CD) on my Macbook. Managed to download and create a boot CD for Ubuntu (like this little operating system btw). Booted the machine with the CD and plugged the drive (which I had extracted from it's casing and placed into a external USB SATA case & plugged to the laptop). The drive is seen by Ubuntu but each time I click on the drive, it gives me the following error: Unable to mount 2.0 TB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog -try dmesg | tail or so I am new to this and spent quite some time searching this site to see if I could find a solution to this problem without troubling anyone. I came up with a few that came close but some of the questioners mentioned that they had lost data...which scared me from going further. I need to basically extract 1 particular folder from the drive. If I can get to mount this volume 'sdb4', there is a folder called 'My_Work' which I need to back up. The rest I have/had a copy of. When I typed in dmesg | tail...I got several lines..but I think ones that are relevant are: [ 406.864677] EXT4-fs (sdb4): bad block size 65536 [ 429.098776] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 439.786365] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 445.982692] EXT4-fs (sdb4): bad block size 65536 [ 1565.841690] EXT4-fs (sdb4): bad block size 65536 I read somewhere to try/check 'sudo fdisk -l /dev/sdb4'. It gave me the following result: Disk /dev/sdb44: 1995.8 GB, 1995774623744 bytes 255 heads, 63 sectors/track, 242639 cylinders, total 3897997312 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdb4 doesn't contain a valid partition table This is where I reached and got frustrated and decided to try & get help on this without digging myself deeper into a hole! I understand that the answer may already be out there. If so, could someone please point me in the right direction. And if not, could someone please resolve (if possible) my situation!

  Read the article

• OSB unit testing, part 1 by Qualogy

  - by JuergenKress

  First you need to implement the simple bpel process like this : In my current project, I inherited a lot of OSB components that have been developed by (former) team members, but they all lack unit tests. This is a situation I really dislike, since this makes it much harder to refactor or bug-fix the existing code base. So, for all newly created components (and components I have to bug-fix) I strive to add unit tests. Of course, the unit tests will be created using my favourite testing tool: soapUI ! Unit of test The unit test should be created for the service composition, which in OSB terms should be the proxy service combination with its business service. Now, since you do not want to rely on any other services, you should provide mock services for all services invoked from your Component-Under-Test. In a previous article, I wrote about mocking your services in soapUI. While this approach would also be valid here, creating a mock service (and certainly deploying it on a separate WebServer) does violate one of the core principles of unit testing: to make your unit tests as self-contained as possible, i.e. not depending on any external components. In this article, I will show you how to achieve this by simply providing a mock response inside your unit test. Scenario The scenario I implement for testing is a simple currency converter; the external request consists of a from and a to currency, and an amount (in currency from). The service will perform an exchange rate lookup using the WebServiceX CurrencyConverter and return a response to the caller consisting of both the source and target currencies and amounts. For the purpose of unit testing, I will implement a mock response for the exchange rate lookup. Read the complete article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: Qualogy,OSB,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• core.* files eating up server space (~50MB)

  - by skytreader

  I'm renting server space from someone and, upon logging in my control panel after quite sometime, noticed an abnormal spike (~50MB) in the disk usage. Upon investigating, I found a lot of core.* files scattered around my public_html directory. Each one is more than 5MB in size but no more than 6MB. The * part is all numbers (in programming regex, that should be core\.\d+). I downloaded one and checked the contents. There was a lot of balderdash characters (NUL mostly, but also a scattering of ETB, ETX, STX) but there's this block of readable text which says: This text is part of the internal format of your mail folder, and is not a real message. It is created automatically by the mail system software. If deleted, important folder data will be lost, and it will be re-created with the data reset to initial values. Pretty self-explanatory. A few blocks above the text are some more readable messages that look like logs but is sandwiched in between non printable characters. I've extracted some below. Scan not valid for mh mailboxes Bogus character 0x%x in news state Can't rewrite news state %.80s Error closing backup news state %.80s No state for newsgroup %.80s found Now, a few concerns: Am I under attack? The messages seem to be about my webmail but I don't use my personal webmail that much---only for a vanity email address and an inbox for an outdated comments system. However, lately, I seem to notice a spike in the spam for my vanity mail. (Note: the comments system is covered by a captcha but every now and then some get through. My vanity email has a spam filter but it isn't as good as I'd like). Next, if this is a feature, can I turn it off? Is it advisable to? I've only 150MB so you see why I'm fretting over a 50MB spike. Some final details: my only server-side scripts are in PHP. The directory which accumulated the most number of these core files is the one containing the Wordpress-managed subdomain of my site. I manage my server through CPanel. Lastly, I decided to delete this files and after some checking nothing seems amiss in my websites nor in my mail. They are indeed the ones responsible for the ~50MB spike as my disk space usage is back to expected.

  Read the article

• Calculating a circle or sphere along a vector

  - by Sparky

  Updated this post and the one at Math SE (http://math.stackexchange.com/questions/127866/calculating-a-circle-or-sphere-along-a-vector), hope this makes more sense. I previously posted a question (about half an hour ago) involving computations along line segments, but the question and discussion were really off track and not what I was trying to get at. I am trying to work with an FPS engine I am attempting to build in Java. The problem I am encountering is with hitboxing. I am trying to calculate whether or not a "shot" is valid. I am working with several approaches and any insight would be helpful. I am not a native speaker of English nor skilled in Math so please bear with me. Player position is at P0 = (x0,y0,z0), Enemy is at P1 = (x1,y1,z1). I can of course compute the distance between them easily. The target needs a "hitbox" object, which is basically a square/rectangle/mesh either in front of, in, or behind them. Here are the solutions I am considering: I have ruled this out...doesn't seem practical. [Place a "hitbox" a small distance in front of the target. Then I would be able to find the distance between the player and the hitbox, and the hitbox and the target. It is my understanding that you can compute a circle with this information, and I could simply consider any shot within that circle a "hit". However this seems not to be an optimal solution, because it requires you to perform a lot of calculations and is not fully accurate.] Input, please! Place the hitbox "in" the player. This seems like the better solution. In this case what I need is a way to calculate a circle along the vector, at whatever position I wish (in this case, the distance between the two objects). Then I can pick some radius that encompasses the whole player, and count anything within this area a "hit". I am open to your suggestions. I'm trying to do this on paper and have no familiarity with game engines. If any software folk out there think I'm doing this the hard way, I'm open to help! Also - Anyone with JOGL/LWJGL experience, please chime in. Is this making sense?

  Read the article

• Website directory structure regarding subdomains, www, and "global" content

  - by Pawnguy7

  I am trying to make a homemade HTTP server. It occurs to me, though, I never fully understood what you might call "relativity" among web pages. I have come across that www. is a subdomain, and I understand its original purpose. IT sounds like, in general, you would redirect (is that 301 or 302?) it to a... non-subdomain, sort of. As in, redirecting www.example.com to example.com. I am not entirely sure how to make this work when retrieving files for an HTTP server though. I would assume that example.com would be the root, and www manifests as a folder within it. I am unsure. There is also the question of multi-level subdomains, e.g. subdomain2.subdomain1.example.com. It seems to me they are structured "backwards", where you go from the root left in folder structure. In this situation, subdomain2 is a directory within subdomain1, which is a directory in the root. Finally, it occurs to me I might want a sort of global location. For example, maybe all subdomains still use an image as a logo. It makes more sense to me that there is one image, rather than each having a copy. In the same way, albiet more doubtfully, you might have global CSS (though that is a bit contrary to the idea of a subdomain in the first place), or a javascript that is commonly used. (more efficient than each having its copy and better for organization purposes). Finally, mabye you have a global 404 page. I think this might be the case where you have user-created subdomains (say bloggername.example.com), where example.com still has a default 404 when either a subdomain does not exist or page does not exists under a valid blogger. I am confused on what the directory structure for this should be. To summarize: Should and how it have a global files not in a subdirectory, how should www. be handled, (or how a now www or other subdomain should be handled), and the pattern for root/subdomain, as well as subdomain within subdomains (order-wise). Sorry this is multiple questions, but I feel at the root they are all related to the directory.

  Read the article

• PHP Fingerprinting CMS Versions by their meta tags [migrated]

  - by Mud

  Hey guys I'm having some issues with the speed of my script. I'm a novice I know so getting past that - what suggestions would you have to speed up my script? I was originally just reading in the index.php and then searching the <head> of the page for an array of strings. Then I read about the get_meta_tags and went that way. Then I had issues with some sites having 300 redirects in place so I used curl to check the URL existed and to speed up things but it's still taking 5 minutes or so to execute. <?php function url_exist($url){ $c=curl_init(); curl_setopt($c,CURLOPT_URL,$url); curl_setopt($c,CURLOPT_HEADER,1); curl_setopt($c,CURLOPT_NOBODY,1); curl_setopt($c,CURLOPT_RETURNTRANSFER,1); curl_setopt($c,CURLOPT_FRESH_CONNECT,1); if(!curl_exec($c)){ return false; }else{ return true; } curl_close($c); } function checkVersion($url){ $tags = get_meta_tags($url); if (is_array($tags) && array_key_exists('generator', $tags)) { $v = "<span style='background-color:#7BF55D;color:#A3A0A0'>".$tags['generator']."</span"; }else{ $v="<span style='background-color:#F55D67;color:#A3A0A0'>Metatag not found!</span>"; } return $v; } $row = 1; echo "<table>"; if (($handle = fopen("url.csv", "r")) !== FALSE) { while (($data = fgetcsv($handle, 1000, ",")) !== FALSE) { $num = count($data); $row++; for ($c=0; $c < $num; $c++) { if(url_exist($data[$c])){ echo "<tr><td>".$data[$c]."</td><td>".checkVersion($data[$c])."</td></tr>"; sleep(2); }else{ echo "<tr><td>".$data[$c]."</td><td><td><span style='background-color:#F55D5D;color:#A3A0A0'>URL not valid!<span></td></tr>"; } } } fclose($handle); } echo "</table>"; ?>

  Read the article

• Help recovering broken OS (permissions issue)

  - by Guandalino

  (At the bottom there is an important update.) I was doing experiments in order to backup a remote account to my local system, Ubuntu 12.04 LTS. I'm not confident with duplicity and probably, due to wrong syntax, some local files have been replaced with remote files. This is just a supposition, I'm not sure this is the real cause of OS corruption. The corruption happened after experimenting with backups, so I think I did something wrong at this regard. I was aware there was a problem when I tried to access a command using sudo: $ sudo ls sudo: unable to open /etc/sudoers: Permission denied sudo: no valid sudoers sources found, quitting sudo: unable to initialize policy plugin This is how /etc/sudoers looks like: $ ls -ald /etc/sudoers -r--r----- 1 root root 788 Oct 2 18:30 /etc/sudoers At this point I tried to reboot and now this is the message I get: The system is running in low graphics mode. Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself. I tried to follow the wizard to configure these settings, but without luck (the system prevents me going on when I press "Next"). The thing that makes me a bit less worried is that all the data on the disk seems readable and I'm able to access them using a live cd. I run memtest and RAM seems to be OK. Do you have any idea about how to recover my system? I'm very glad to provide further information, just let me know what info could be helpful. UPDATE. The issue is about wrong permissions and this is how I discovered: I mounted the root partition of the broken OS on /mnt/broken/ (live CD) and did ls /mnt/broken/. I got a permission denied error, while I expected to have the directory listing. I had to do sudo ls /mnt/broken/ and this worked. Thus without having root permission via sudo it's impossible to access the root of broken os. The current output of ls -ld /mnt/broken/ is: drwxr-x--- 29 1000 812 4096 2012-12-08 21:58 /mnt/broken Any thoughts on how to restore the old (working) set of permissions?

  Read the article

• EF Doesn't Like Same Named Tables

  - by Anthony Trudeau

  Originally posted on: http://geekswithblogs.net/tonyt/archive/2013/07/02/153327.aspxIt's another week and another restriction imposed by the Entity Framework (EF). Don't get me wrong. I like EF, but I don't like how it restricts you in different ways. At this point you may be asking yourself the question: how can you have more than one table with the same name?The answer is to have tables in different schemas. I do this to partition the data based on the area of concern. It allows security to be assigned conveniently. A lot of people don't use schemas. I love them. But this article isn't about schemas.In the situation I have two tables:Contact.PersonEmployee.PersonThe first contains the basic, more public information such as the name. The second contains mostly HR specific information. I then mapped these tables to two classes. I stuck to a Table per Class (TPC) mapping, because of problems I've had in the past implementing inheritance with EF. The following code gives you the basic contents of the classes.[Table("Person", Schema = "Employee")]public class Employee {   ...   public int PersonId { get; set; }   [ForeignKey("PersonId")]   public virtual Person Person { get; set; }}[Table("Person", Schema = "Contact")]public class Person {   [Key]   public int Id { get; set; }   ...}This seemingly simple scenario just doesn't work. The problem occurs when you try to add a Person to the DbContext. You get an InvalidOperationException with the following text:The entity types 'Employee' and 'Person' cannot share table 'People' because they are not in the same type hierarchy or do not have a valid one to one foreign key relationship with matching primary keys between them..This is interesting for a couple of reasons. First, there is no People table in my database. Second, I have used the SetInitializer method to stop a database from being created, so it shouldn't be thinking about new tables.The solution to my problem was to change the name of my Employee.Person table. I decided to name it Employee.Employee. It's not ideal, but it gets me past the EF limitation. I hope that this article will help someone else that has the same problem.

  Read the article

• How can I tweak this A* search pathfinding algorithm to handle different terrain movement values?

  - by user422318

  I'm creating a 2D map-based action game with similar interaction design as Diablo II. In other words, the player clicks around a map to move their player. I just finished player movement and am moving on to pathfinding. In the game, enemies should charge the player's character. There are also five different terrain types that give different movement bonuses. I want the AI to take advantage of these terrain bonuses as they try to reach the player. I was told to check out the A* search algorithm (http://en.wikipedia.org/wiki/A*_search_algorithm). I'm doing this game in HTML5 and JavaScript, and found a version in JavaScript: http://www.briangrinstead.com/blog/astar-search-algorithm-in-javascript I'm trying to figure out how to tweak it though. Below are my ideas about what I need to change. What else do I need to worry about? When I create a graph, I will need to initialize the 2D array I pass in passed on with a traversal of a map that corresponds to the different terrain types. in graph.js: "GraphNodeType" definition needs to be modified to handle the 5 terrain types. There will be no walls. in astar.js: The g and h scoring will need to be modified. How should I do this? in astar.js: isWall() should probably be removed. My game doesn't have walls. in astar.js: I'm not sure what this is. I think it indicates a node that isn't valid to be processed. When would this happen, though? At a high level, how do I change this algorithm from "oh, is there a wall there?" to "will this terrain get me to the player faster than the terrain around me?" Because of time, I'm also debating reusing my Bresenham algorithm for the enemies. Unfortunately, the different terrain movement bonuses won't be used by the AI, which will make the game suck. :/ I'd really like to have this in for the prototype, but I'm not a developer by trade nor am I a computer scientist. :D If you know of any code that does what I'm looking for, please share! Sanity check tips for this are also appreciated.

  Read the article

• Is it unusual for a small company (15 developers) not to use managed source/version control?

  - by LordScree

  It's not really a technical question, but there are several other questions here about source control and best practice. The company I work for (which will remain anonymous) uses a network share to host its source code and released code. It's the responsibility of the developer or manager to manually move source code to the correct folder depending on whether it's been released and what version it is and stuff. We have various spreadsheets dotted around where we record file names and versions and what's changed, and some teams also put details of different versions at the top of each file. Each team (2-3 teams) seems to do this differently within the company. As you can imagine, it's an organised mess - organised, because the "right people" know where their stuff is, but a mess because it's all different and it relies on people remembering what to do at any one time. One good thing is that everything is backed up on a nightly basis and kept indefinitely, so if mistakes are made, snapshots can be recovered. I've been trying to push for some kind of managed source control for a while, but I can't seem to get enough support for it within the company. My main arguments are: We're currently vulnerable; at any point someone could forget to do one of the many release actions we have to do, which could mean whole versions are not stored correctly. It could take hours or even days to piece a version back together if necessary We're developing new features along with bug fixes, and often have to delay the release of one or the other because some work has not been completed yet. We also have to force customers to take versions that include new features even if they just want a bug fix, because there's only really one version we're all working on We're experiencing problems with Visual Studio because multiple developers are using the same projects at the same time (not the same files, but it's still causing problems) There are only 15 developers, but we all do stuff differently; wouldn't it be better to have a standard company-wide approach we all have to follow? My questions are: Is it normal for a group of this size not to have source control? I have so far been given only vague reasons for not having source control - what reasons would you suggest could be valid for not implementing source control, given the information above? Are there any more reasons for source control that I could add to my arsenal? I'm asking mainly to get a feel for why I have had so much resistance, so please answer honestly. I'll give the answer to the person I believe has taken the most balanced approach and has answered all three questions. Thanks in advance

  Read the article

• How to temporarily save the result of the query, to use in another?

  - by Truth

  I have this problem I think you may help me with. P.S. I'm not sure how to call this, so if anyone finds a more appropriate title, please do edit. Background I'm making this application for searching bus transit lines. Bus lines are a 3 digit number, and is unique and will never change. The requirement is to be able to search for lines from stop A to stop B. The user interface is already successful in hinting the user to only use valid stop names. The requirement is to be able to display if a route has a direct line, and if not, display a 2-line and even 3-line combination. Example: I need to get from point A to point D. The program should show: If there's a direct line A-D. If not, display alternative, 2 line combos, such as A-C, C-D. If there aren't any 2-line combos, search for 3-line combos: A-B, B-C, C-D. Of course, the app should display bus line numbers, as well as when to switch buses. What I have: My database is structured as follows (simplified, actual database includes locations and times and whatnot): +-----------+ | bus_stops | +----+------+ | id | name | +----+------+ +-------------------------------+ | lines_stops_relationship | +-------------+---------+-------+ | bus_line | stop_id | order | +-------------+---------+-------+ Where lines_stops_relationship describe a many-to-many relationship between the bus lines and the stops. Order, signifies the order in which stops appear in a single line. Not all lines go back and forth, and order has meaning (point A with order 2 comes after point B with order 1). The Problem We find out if a line can pass through the route easily enough. Just search for a single line which passes through both points in the correct order. How can I find if there's a 2/3 line combo? I was thinking to search for a line which matches the source stop, and one for the destination stop, and see if I can get a common stop between them, where the user can switch buses. How do I remember that stop? 3 line combo is even trickier, I find a line for the source, and a line for the destination, and then what? Search for a line which has 2 stops I guess, but again, How do I remember the stops? tl;dr How do I remember results from a query to be able to use it again? I'm hoping to achieve this in a single query (for each, a query for 1-line routes, a query for 2, and a query for 3-line combos). Note: I don't mind if someone suggests a completely different approach than what I have, I'm open to any solutions. Will award any assistance with a cookie and an upvote. Thanks in advance!

  Read the article

• What is the right way to group this project into classes?

  - by sigil

  I originally asked this on SO, where it was closed and recommended that I ask it here instead. I'm trying to figure out how to group all the functions necessary for my project into classes. The goal of the project is to execute the following process: Get the user's FTP credentials (username & password). Check to make sure the credentials establish a valid connection to the FTP server. Query several Sharepoint lists and join the results of those queries to create a list of items that need to have action taken on them. Each item in the list has a folder. For each item: Zip the contents of the folder. Upload the folder to the FTP server using SFTP Update the item's Sharepoint data. Email the user an Excel report showing, e.g., Items without folder paths Items that failed to zip or upload Steps 2-5 are performed on a periodic basis; if step 2 returns an invalid connection, the user is alerted and the process returns to step 1. If at any point the user presses a certain key, the process terminates. I've defined the following set of classes, each of which is in its own .cs file: SFTP: file transfer processes DataHandler: Sharepoint data retrieval/querying/updating processes. Also makes and uploads the zip files. Exceptions: Not just one class, this is the .cs file where I have all of my exception classes. Report: Builds and sends the report. Program: The main class for running the program. I recognize that the DataHandler class is a god object, but I don't have a good idea of how to refactor it. I feel like it should be more fine-grained than just breaking it into Sharepoint, Zip, and Upload, but maybe that's it. Also, I haven't yet worked out how to combine the periodic behavior with the "wait for user input at any point in the process" part; I think that involves threads, which means other classes to manage the threads... I'm not that well-versed in design patterns, but is there one that fits this project well? If this is too big of a topic to neatly explain in an SO answer, I'll also accept a link to a good tutorial on what I'm trying to do here.

  Read the article

• ADF Real World Developers Guide Book Review

  - by Grant Ronald

  I'm half way through my review of "Oracle ADF Real World Developer's Guide" by Jobinesh Purushothaman - unfortunately some work deadlines de-railed me from having completed my review by now but here goes.  First thing, Jobinesh works in the Oracle Product Management team with me, so is a colleague. That declaration aside, its clear that this is someone who has done the "real world" side of ADF development and that comes out in the book. In this book he addresses both the newbies and the experience developers alike.  He introduces the ADF building blocks like entity objects and view obejcts, but also goes into some of the nitty gritty details as well.  There is a pro and con to this approach; having only just learned about an entity or view object, you might then be blown away by some of the lower details of coding or lifecycle.  In that respect, you might consider this a book which you could read 3 or 4 times; maybe skipping some elements in the first read but on the next read you have a better grounding to learn the more advanced topics. One of the key issues he addresses is breaking down what happens behind the scenes.  At first, this may not seem important since you trust the framework to do everything for you - but having an understanding of what goes on is essential as you move through development.  For example, page 58 he explains the full lifecycle of what happens when you execute a query.  I think this is a great feature of his book. You see this elsewhere, for example he explains the full lifecycle of what goes on when a page is accessed : which files are involved,the JSF lifecycle etc. He also sprinkes the book with some best practices and advice which go beyond the standard features of ADF and really hits the mark in terms of "real world" advice. So in summary, this is a great ADF book, well written and covering a mass of information.  If you are brand new to ADF its still valid given it does start with the basics.  But you might want to read the book 2 or 3 times, skipping the advanced stuff on the first read.  For those who have some basics already then its going to be an awesome way to cement your knowledge and take it to the next levels.  And for the ADF experts, you are still going to pick up some great ADF nuggets.  Advice: every ADF developer should have one!

  Read the article

• Cant connect to mysql using self signed SSL certificate

  - by carpii

  After creating a self-signed SSL certificate, I have configured my remote mysqld to use them (and ssl is enabled) I ssh into my remote server, and try connecting to its own mysqld using ssl (mysql server is 5.5.25).. ~> mysql -u <user> -p --ssl=1 --ssl-cert=client.cert --ssl-key=client.key --ssl-ca=ca.cert Enter password: ERROR 2026 (HY000): SSL connection error: error:00000001:lib(0):func(0):reason(1) Ok, I remember reading theres some problem with connecting to the same server via SSL. So I download the client keys down to my local box, and test from there... ~> mysql -h <server> -u <user> -p --ssl=1 --ssl-cert=client.cert --ssl-key=client.key --ssl-ca=ca.cert Enter password: ERROR 2026 (HY000): SSL connection error Its unclear what this "SSL connection error" error refers to, but if I omit the -ssl-ca, then I am able to connect using SSL.. ~> mysql -h <server> -u <user> -p --ssl=1 --ssl-cert=client.cert --ssl-key=client.key Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 37 Server version: 5.5.25 MySQL Community Server (GPL) However, I believe that this is only encrypting the connection, and not actually verifying the validity of the cert (meaning I would be potentially vulnerable to man-in-middle attack) The ssl certs are valid (albeit self signed), and do not have a passphrase on them So my question is, what am I doing wrong? How can I connect via SSL, using a self signed certificate? MySQL Server version is 5.5.25 and the server and clients are Centos 5 Thanks for any advice Edit: Note that in all cases, the command is being issued from the same directory where the ssl keys reside (hence no absolute path)

  Read the article

• SChannel "cannot find certificate in either LocalMachine or CurrentUser store"

  - by Chris J

  We have an in-house application that requires the use of client SSL certificates to authenticate with a remote server (not under our control). This has worked without problems before but on deploying to a new server, we're having problems getting Windows 2008 to use the certificate. The certificate exists as a .pfx file that contains a private key. The same certificate exists in the LocalMachine store, again with its private key. We've ensured the one in the LocalMachine store is correct by creating a website in IIS against that certificate, so we're happy that the certificate, certificate chain, and private key is valid. The PFX has been created by exporting from the Certificates MMC snap-in. The issue is that we get the following in the system diagnostic logs that suggests it can't find the private key: System.Net Information: 0 : [5988] SecureChannel#23264094 – Locating the private key for the certificate: [Subject] CN=internal-server.company.com, OU=Servers, OU=Devices, O=org [Issuer] CN=SubCA02, OU=CA, o=org [Serial Number] 407ABCDE [Not Before] 31/10/2013 11:08:48 AM [Not After] 31/10/2016 11:08:48 AM [Thumbprint] 4354A34F6004F019E60F055979A47E50F62D1504 . System.Net Information: 0 : [5988] SecureChannel#23264094 – Cannot find the certificate in either the LocalMachine store or the CurrentUser store. I've validated the thumbprint, issuer and serial number listed in the log with the certificate in the LocalMachine store and these marry up. From what I can tell with much searching, this appears to be a permissions issue. The user the application is running as has been granted access to the private key (Personal Certificates - right click on the certificate - all tasks - Manage Private Keys), so I'm now at a loss as to which permission(s) it may be that is causing the issue.

  Read the article

• ssh key error - Permission denied (publickey,gssapi-keyex,gssapi-with-mic)

  - by user1963938

  Amazon Ec2 :: Redhat 6. 64 Bit I'm trying to follow the socks5 guidelines (http://www.catonmat.net/blog/linux-socks5-proxy/ ) to open a socks on one of our servers but unfortunately I got suck at step 1 . ssh -N -D 0.0.0.0:1080 localhost I get error Permission denied (publickey,gssapi-keyex,gssapi-with-mic). How do I fix it ? More debug info ssh -v -f -N -D 0.0.0.0:1080 localhost OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_0' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_0' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug1: Trying private key: /root/.ssh/id_rsa debug1: Trying private key: /root/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• xinetd 'connection reset by peer'

  - by ceejayoz

  I'm using percona-clustercheck (which comes with Percona's XtraDB Cluster packages) with xinetd and I'm getting an error when trying to curl the clustercheck service. /usr/bin/clustercheck: #!/bin/bash # # Script to make a proxy (ie HAProxy) capable of monitoring Percona XtraDB Cluster nodes properly # # Author: Olaf van Zandwijk <[email protected]> # Documentation and download: https://github.com/olafz/percona-clustercheck # # Based on the original script from Unai Rodriguez # MYSQL_USERNAME="clustercheckuser" MYSQL_PASSWORD="clustercheckpassword!" ERR_FILE="/dev/null" AVAILABLE_WHEN_DONOR=0 # # Perform the query to check the wsrep_local_state # WSREP_STATUS=`mysql --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} -e "SHOW STATUS LIKE 'wsrep_local_state';" 2>${ERR_FILE} | awk '{if (NR!=1){print $2}}' 2>${ERR_FILE}` if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]] then # Percona XtraDB Cluster node local state is 'Synced' => return HTTP 200 /bin/echo -en "HTTP/1.1 200 OK\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is synced.\r\n" /bin/echo -en "\r\n" exit 0 else # Percona XtraDB Cluster node local state is not 'Synced' => return HTTP 503 /bin/echo -en "HTTP/1.1 503 Service Unavailable\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is not synced.\r\n" /bin/echo -en "\r\n" exit 1 fi /etc/xinetd.mysqlchk: # default: on # description: mysqlchk service mysqlchk { # this is a config for xinetd, place it in /etc/xinetd.d/ disable = no flags = REUSE socket_type = stream port = 9200 wait = no user = nobody server = /usr/bin/clustercheck log_on_failure += USERID only_from = 10.0.0.0/8 127.0.0.1 # recommended to put the IPs that need # to connect exclusively (security purposes) per_source = UNLIMITED } When attempting to curl the service, I get a valid response (HTTP 200, text) but a 'connection reset by peer' notice at the end: HTTP/1.1 200 OK Content-Type: text/plain Percona XtraDB Cluster Node is synced. curl: (56) Recv failure: Connection reset by peer Unfortunately, Amazon ELB appears to see this as a failed check, not a succeeded one. How can I get clustercheck to exit gracefully in a manner that curl doesn't see a connection failure?

  Read the article

< Previous Page | 948 949 950 951 952 953 954 955 956 957 958 959  | Next Page >