Search Results

Search found 29101 results on 1165 pages for 'open basedir'.

Page 957/1165 | < Previous Page | 953 954 955 956 957 958 959 960 961 962 963 964  | Next Page >

• Create a wifi hotspot in a place where an authentication is required [closed]

  - by SoftTimur

  I live in a residence where Internet is provided via cable. Once the computer is connected to the cable, launching a browser will trigger an authentication, I have a username and password to enter, then the internet will be connected. With a gateway (e.g. Wireless Cable Voice Gateway Model CBVG834G) and 2 cables, two PCs can connect to the Internet with my account at the same time. Now the question is, I don't like the cable, and would like to create a wifi hotspot. It seems realizable with the same gateway. According to the instruction on page 2-4 of the manual: Enter http://192.168.0.1 in the address field of your Internet browser. Log in to the gateway with either of the default user names, MSO or admin... However, trying to open 192.168.0.1 gives me an error on the browser. Does anyone know what happened? Is it due to the authentication required by my residence? Is there any other way to build a hotspot of wifi? PS: My system is MAC OS

  Read the article

• Windows 7 misses keystrokes from internal keyboard after hibernation (on Acer Aspire 5820)

  - by ron

  I face a very strange symptom on my Acer Aspire laptop (with the factory default Win7 install and divers. Windows update running). After waking the computer from hibernation, it is a pain to type, since on average 5-10 keypresses are missing per 100 presses, using the laptop's keyboard. Steps to reproduce: 1) Power off 2) Power on, wait for system to become usable 3) Open notepad, for 5 times do hit 10x the same character. This gives a similar pattern of 50 chars total: xxxxxxxxxxyyyyyyyyyyaaaaaaaaaassssssssssdddddddddd 4) Optionally repeat. Everything is fine this far. 5) Hibernate. 6) Power on and resume. 7) Repeat steps 3)-4). This time approximately 3-5 character will be missing from each 50 characters. What I ruled out: putting to Sleep or just Locking and resuming from there does not cause problem battery / AC usage does not matter net connection does not matter running processes seem to be the same before and after hibernation key press speed doesn't really matter. For the test I use a nominal 3-5 strokes/second beat. plugging in an external USB keyboard works fine, but the built-in one still misbehaves What could be the problem? How could I diagnose if the keypresses arrive in, but get swallowed at some point? (maybe some nasty keyboard handler hook misbehaves?). Update: It seems that pushing the PowerSmart button and toggling to power saving state fixes the problem. Also, toggling it again back to the original state keeps it fixed. So this may be a fine workaround, but is not a conforming solution.

  Read the article

• Hosting options for data-enabled web application

  - by Hertfordian

  I am independently developing an asp.net business application with a MySQL database. I currently have a Windows web hosting account which includes MySQL and MS SQL as installed supported options. I am not yet finally committed to using MySQL and I want to keep my options open to evaluate MS SQL and possibly other options such as PostGreSQL later when more of the business logic is in place - my data access layer will handle the database connectivity. The web hosting setup I have now is fine for development purposes, but if in future I want to use, say, PostGreSQL Server, and a level of usage of, say, 10,000 hits per day concentrated in business hours, I'm assuming I'll need a dedicated server. But in that case, should I just install PostGreSQL on the dedicated server, or is best practice to have a separate database server - perhaps locked down so that it can only be accessed through the web server? And supposing it was only 2000 hits a day - how would that change things? I'd appreciate it if anyone could point me in the direction of a useful guide to these sorts of issues. Naturally if I start paying for separate servers, I would like to know exactly why I'm doing it and what the performance issues and thresholds are.

  Read the article

• Working with an external button box

  - by Scott

  I tried this question on Stack Overflow, but I was pointed here, so here goes: For a new project for myself, I am looking for a way to be able to (for example) open a pop-up window on my laptop, by pressing a button on an external device (to be build by myself, or at least bought) connected with USB. Basically I would be looking at something like a Arduino or Raspberry (IF I am looking in the right direction) with buttons on it, and as soon as I hit a button on the external box with physical buttons, a command activates on my laptop and for example opens a popup window in which I can input tekst. Does anyone know: 1) if it is possible to do this at all. 2) What equipment is needed for the external box, what programming is needed. I preffer .net (dot net) but maybe it can only be done with software from the external box. If anyone can point me in the right direction, like make/model of the external box or websites I would be very happy. I have knowledge of Visual Studio/.net but I am willing to learn other languages if .net is not an option for this project. Thanks in advance Scott PS: If anyone knows of some better tags, or at least knows what I mean and needs me to edit the question, please do tell me... I am new on Stack Overflow/Superuser.

  Read the article

• phpMyadmin issue on cpanel

  - by user1149244

  I logged in into our cpanel to view phpMyAdmin but I can't open it. It give me this error message: Warning: session_write_close() [function.session-write-close]: write failed: No space left on device (28) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: session_write_close() [function.session-write-close]: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/cpanel/userhomes/cpanelphpmyadmin/sessions) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php:42) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 99 I contacted the support to assist me with. They just told me that the server is unmanaged. They told me to delete the free the partition but I don't know how to do it. I'm noob on that matter. The /var/log/btmp is over 8GB as they said. I want to delete that file. How would I do this? I need to free the space of the partition. I need some steps on how to do it and also steps on how to delete the /var/log/btmp. I have been googling around but I haven't found anything.

  Read the article

• Does cloud computing offer this? [closed]

  - by TheBlackBenzKid

  I have some newb questions I want answering please about cloud hosting - we are currently looking at Rackspace and getting a windows box. This is the situation: We have 15 computers in our office. We have 3 printers, some wifi and some network plugged. We have a standard router and the office share things via dropbox. The computers are not on Windows SBS or something similar. We want a cloud hosting solution that will offer User can login on any machine in the office and see the machine software User can login on any machine in the office and open Outlook and their emails and signature will be on exchange automatically A shared company folder on the network All printers automatically installed on the network Users can login remotely to access emails via the web At the moment we have a network company saying we need Xeon server in house with backup and psu and Windows SBS with license for each machine and also we need cabinets and cabling setup and also load balancers and modification of our DNS for emails. My question is this. Can cloud offer this? Can we have a server in the cloud that does this? Is it possible I mean the computers would be wireless connected to this cloud and you turn the machine on and its hosted?

  Read the article

• EXCEL 2007 macro

  - by Binay

  I have a macro which connects to db and fetches data for me and makes it comma separated. But the problem is the comma is getting appended to the last row, which I don't want. I'm struggling here. Could you please help out? Here is the part from the code. If cn.State = adStateOpen Then Rec_set.Open "SELECT concat(trim(Columns_0.ColumnName), ' ','(', 'varchar(2000)' ,')') columnname FROM DBC.Columns Columns_0 WHERE (Columns_0.TableName= " & Chr(39) & Tablename & Chr(39) & "and Columns_0.Databasename=" & Chr(39) & db & Chr(39) & ")ORDER BY Columns_0.Columnid;", cn 'Issue SQL statement If Not Rec_set.EOF And Not Rec_set.EOF Then Do Until Rec_set.EOF For i = 0 To Rec_set.Fields.Count - 1 strString = strString & Rec_set(i) & "," Next strFile.WriteLine (strString) strString = "" Rec_set.MoveNext Loop Here is the result I am getting. EMPNO (varchar(2000)), ENAME (varchar(2000)), JOB (varchar(2000)), MGR (varchar(2000)), HIREDATE (varchar(2000)), SAL (varchar(2000)), COMM (varchar(2000)), DEPTNO (varchar(2000)), I don't want the last comma.

  Read the article

• Computer is dying--what should I be looking for?

  - by Will

  Okay, I'm a bit knowledgeable with pooters and such, but i'm confused. My computer is dying slowly, and I'm not sure what part is causing this. Computer details: Vista, dell machine, intel Q6600, 2.4 Core Duo (quad core), standard memory and drive (unknown manufacturer). Symptoms: I would best describe the symptoms as memory corruption. After a couple days on, I start getting applications crashing or failing to open for a lack of "resources". Sounds are corrupted. Onscreen text gets corrupted; the characters of text are garbled, not the pixels on the screen. Video memory seems untouched as I haven't seen any misplaced pixels. Recently I've lost files on disk. I've also experienced errors reporting a supposed lack of disk space, even though I have fifty gigs free. There was one point where I couldn't get to the POST when booting up. After I cleaned everything (see next) this hasn't happened. Diagnostic steps: First thing I did was clean the case. There was a lot of dust buildup on heatsinks, so I cleaned all that up. No help. Next, I disconnected and reconnected everything, from power cables to memory (did not reseat cpu). No change. Last, I ran the standard vista memory diagnostics and ran checkdisk. Both reported no errors found. I have not run any POST tests, now that I think about it. I'm at a loss at this point. Disk appears fine, memory too. I'd expect motherboard issues to result in the thing not booting up, yet it does every time. What should I be looking at? What more can I do?

  Read the article

• What happened to 'Copy Public Gallery Link' for folders in Photos in Dropbox?

  - by Transgenic

  I've been trying to figure out how to use the 'Photos' folder properly, but it does not seem to contain the functionality that is mentioned on various websites. From what I've read, you are supposed to create a folder within the 'Photos' folder. At that point, it becomes a public gallery for which you can access the context menu item Copy Public Gallery Link. However, I do not have this context menu item. I found a topic on the DropBox forum, but it is 2 years old. Even the various website information mentioned is over a year old. I found a topic from this year on SuperUser that mentions about the Share link menu item. I understand that this functionality is basically the same as Copy Public Gallery Link, however, the key difference is that it opens the website for which I need to click 'Copy link to this page' link, which then adds it to the clipboard. My primary questions are: Did they phase out the Copy Public Gallery Link from the context menu entirely? If not, is there a way to re-enable this menu item? If not, am I using the Photos folder properly? Lastly, if there is no way to get this menu item, is there some kind of script or hack-around that will let me simplify the Shark link + Copy link to this page functionality without requiring it to open my web browser? Note: I had to edit my post to remove other website links that I mention since I'm considered a 'New User' here and am only able to post 2 hyperlinks. Sorry.

  Read the article

• RedStation.com is heaven for ddos attackers, How to file complaint?

  - by Ehsan

  Sorry, I don't know where to open this subject. This is not the first time we have faced with a massive DDOS attack from one of servers in RedStation.com and even after we had contacted with their abuse department with it's log there is no cooperation and they don't even like to bother themselves about it. and we don't know how to stop such activity. Do you know how to file complaint against this datacenter? we could not be patient anymore and see they are not care about such things on their network ? it seems like they are heaven for attackers now since they close their eyes to gain more money. I guess some global organization is missing in this matter to investigate such activity and make sure providers are responsible for their services. Here is some of it's log: 2686M 75G DROP all -- * * 31.3-RedStation 0.0.0.0/0 rt: 16167 0.002007 31.3-RedStation -> my-server-ip UDP Source port: 36391 Destination port: 16167 0.002011 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002014 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination port: 12081 0.002018 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination port: 12081 0.002021 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002025 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination port: 12081 0.002033 31.3-RedStation -> my-server-ip UDP Source port: 36391 Destination port: 16167 0.002037 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002040 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002044 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002047 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination Any response would be appreciated

  Read the article

• With Ubuntu 12.04 unlike 11.04 Wine installed application start menu links are missing

  - by Ron Whites

  With Ubuntu 12.04 and wine 1.4 unlike ubuntu 11.04 with wine 1.2.2 installed application start menu links are missing. For instance with Ubuntu 11.04 including Wine I can install one of our Windows applications and then can go to Applications Wine Programs Semantic Designs TestCoverage Documentation to bring up the documentation for how to run our tool. Unfortunately with Ubuntu 12.04 the Applications menu is gone and going to Dash I do see "Recent Apps and more apps" but my installed Wine application and related documentation link is shown present, even though the wine uninstaller shows in present. I found this online suggestion and tried using the gnome "main menu"... Windows key to launch the Dash. Enter "Main Menu" in the search field and open the old Edit Main Menu app. Select the Category (aka Unity Dash Filter) you want the item in. Name the Dash/Launcher Item Add the Command to launch said app With "mainmenu" then get down to the TestCoverage Documentation and I could see a command link in properties of .. env WINEPREFIX="/home/sdtest/.wine" wine C:\windows\command\start.exe /Unix /home/sdtest/.wine/dosdevices/c:/users/sdtest/Start\ Menu/Programs/Semantic\ Designs/Test\ Coverage/Java\ 1.7\ Documentation.lnk BUT I could not execute this link to view the installed documentation. So I copied the link properties into a file, set it as executable, and ran it as a bash script and the documentation came up! So why can't I use this link under main menu?

  Read the article

• Incoming traffic while on public network

  - by zvikico

  I'm developing a web app and I need to be able to get incoming traffic from 3rd party services I use. This is a classic webhooks situation: I send a request with a return address and receive the response (via HTTP) some time later to the given address. The simple solution would be to provide my external IP address and forward the incoming traffic from the router to my machine. However, I'm working in a large office and I cannot control the router configuration. I'm looking for a different way to achieve that. I do have servers online. I can have a daemon running on one of those servers, which will handle the incoming traffic. I can run a parallel daemon on my machine, which will keep an open connection with the remote daemon (over ssh preferred) and when an inbound traffic is received by the remote, it will send it to the local, which will send it to the correct port on my machine, as if it was received in the natural way. Is there any ready-made solution for that? PS. I'm on OS X and my server is Ubuntu. Thanks, zvikico

  Read the article

• Auto-focus xdvi after running viewdvi in Emacs with AUCTeX.

  - by D Connors

  I've been using emacs with AUCTeX mode to edit my latex documents for a few days now, but there's something that's really bugging me. As it should be, whenever I do C-c C-c RET it compiles the file, and if repeat the command it views the output in xdvi. It's also set to the mini-mode TeX-source-specials-mode, so instead of opening a new window in xdvi it only reloads the window that's already open, brings it to the front, and sends me to wherever the pointer was in emacs (forward search). Now here's the problem: Even though the xdvi window is brought to the front, it's not focused. Instead, the emacs windows stays with focus (and that's where any keyboard input goes). And I keep forgetting about that, which leads me to accidentally editing the source file while trying to navigate in xdvi. Not to mention I'm forced to alt-tab in order to focus xdvi, and alt-tab twice if I just want to get back to emacs. Is there a way around this problem? I just want xdvi to be focused whenever I run the view command from emacs.

  Read the article

• How do I remove a printer connection without the user's intervention?

  - by 1.618

  Here's the situation: We're replacing 11 printers with newer models, and we'll be installing them on our print server and sharing them out. The plan is to share the new printers under different names than the ones they're replacing, and un-share the old ones. So I need to come up with a way to remove the client connections to old printers automatically. Clients are mostly Windows 7 with a few XP. My first idea was to call prnmngr.vbs from the login script to remove each old printer explicitly by name. The problem is that some users don't log out when they're done for the day, so I can't count on their login script running before they next need to print. I could remotely run prnmngr.vbs using SCCM, but if it's not 'impersonating' the user, I don't think it will remove their printers. Any ideas? Could I lookup how to access WMI using c# code and write a "trojan" to remove specific printers without requiring the user to do anything? (I'm only half joking). I'm open to any suggestion! Thanks!

  Read the article

• NginxHttpAuthBasicModule with Sinatra & Passenger

  - by scainey

  Hi, I'm serving static pages from a Sinatra application using Nginx. I've implemented Basic Authentication for one page on the site using NginxHttpAuthBasicModule, the authentication succeeds but Nginx doesn't resolve the link. Error log gives - 2010/03/22 12:15:19 [error] 7143#0: *2902 open() "/home/me/live/mysite_home/public /mypage" failed (2: No such file or directory), client: 82.71.18.122, server: mysite.com, request: "GET /mypage HTTP/1.1", host: "mysite.com" The actual file is found at: /home/me/live/mysite_home/live/mypage.erb The configuration file is: server { listen 80; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } server { listen 443; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; ssl on; ssl_certificate /etc/nginx/conf/certs/server.crt; ssl_certificate_key /etc/nginx/conf/certs/server.key; keepalive_timeout 70; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } Not sure if this is a Sinatra, Passenger or Nginx thing, or if I'm just missing something.

  Read the article

• Can I sort files A-Z and at the same time Z-A?

  - by The_Buff

  I am trying to sort and rename a large number of files that are labeled #####_## The LEFT side of the underscore are numbers (e.g., 32956715, 32956810, etc.) that do not repeat. The RIGHT side of the underscore are also numbers (e.g., 1, 2, 3, etc.) and they do repeat. (The left side is the number of a scan and the right side is the page of that particular scan.) I would like to be able to sort the left side of the underscore Z-A and the right side A-Z. Example: 3_1 3_2 3_3 2_1 2_2 2_3 1_1 1_2 1_3 I am using ReNamer by den4b (easily the best free renamer out there). It supports regular expressions so I believe there should be an easy way to do this, but I don't know how. (I've been trying to learn regular expressions but I don't use them enough to retain anything.) I'm open for any suggestions that achieve the same result. I've spent enough time trying to figure it out that I could have probably just sorted them myself already but this is a reccuring problem so hopefully someone has a solution that will save me lots of time in the long run. Thank You!

  Read the article

• Windows 7 Taskbar Icons Randomly Disappearing

  - by Ryker

  This is a problem that i'm totally stumped on. Taskbar Icons that are pinned, as well as open program thumbs keep disappearing. This is totally random, no set pattern. I've tried updating drivers for the vid card, rolling back to old drivers, nothing seems to work. I've also tried the usual uncheck hide the taskbar and recheck, changing the start menu, keeping commonly used programs in start menu, etc. This is using an add-in card which is a necessity. Here is the specs on the machine: New Dell Optiplex 390 i3 2100 Proc 3gb Ram, Windows 7 32-bit. The add in card is an Nvidia 8400 GS model. I've tried different versions of the 8400gs, from MSI, or from other manufactureres and regardless it keeps happening. After the Icons disappear, I can log out and log back in and they return, but disappear again. I can reinstall the drivers for the vid card and it fixes it for a few days, and then they disappear again. There isn't any set pattern of days that it happens, software being used, etc. Another user in the office had the same problem with the exact same machine, but updating the vid card drivers fixed the issue. Anyone?

  Read the article

• Possible Hack with FTP - What are the solutions?

  - by iamrohitbanga

  I was reading the FTP rfc and hence had this idea. Suppose there are several public ftp servers that allow anonymous user login. I open a control connection on port 21 to each of these servers. Now suppose there is a web server a.com with ip address x.y.z.w listening on port 80. FTP allows a user to specify the host on which the data connection is to be setup. So a user specifies the host and port number of a.com web server. Now the ftp server starts sending data to a.com for which it is not a valid HTTP request and hence it is rejected. But a.com notes that the invalid http request came from a public ftp server and not my ip address. Can this not lead to a distributed attack by utilizing all public ftp servers. worse still the the data being sent by ftp server could be a valid http request which could trigger a.com to send a file back to the ftp server. Is there a solution for this or is it no problem at all.

  Read the article

• What Logs / Process Stats to monitor on a Ubuntu FTP server?

  - by Adam Salkin

  I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

  Read the article

• NginxHttpAuthBasicModule with Sinatra & Passenger

  - by scainey

  I'm serving static pages from a Sinatra application using Nginx. I've implemented Basic Authentication for one page on the site using NginxHttpAuthBasicModule, the authentication succeeds but Nginx doesn't resolve the link. Error log gives - 2010/03/22 12:15:19 [error] 7143#0: *2902 open() "/home/me/live/mysite_home/public /mypage" failed (2: No such file or directory), client: 82.71.18.122, server: mysite.com, request: "GET /mypage HTTP/1.1", host: "mysite.com" The actual file is found at: /home/me/live/mysite_home/live/mypage.erb The configuration file is: server { listen 80; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } server { listen 443; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; ssl on; ssl_certificate /etc/nginx/conf/certs/server.crt; ssl_certificate_key /etc/nginx/conf/certs/server.key; keepalive_timeout 70; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } Not sure if this is a Sinatra, Passenger or Nginx thing, or if I'm just missing something.

  Read the article

• What would prevent the same ActiveX control from downloading on one internal website but not another?

  - by ProfessionalAmateur

  We have two internal webservers for an application at my company, one is the development server and the other is production. This application server will deploy and install and ActiveX control to allow the use of specific functionality. The ActiveX control is the exact same on both servers. Last week suddenly when trying to install and run this ActiveX control from the development server stopped working. IE will still prompt the user to install it, but when select "Install this Add-on for all users on this computer", nothing happens. Another IE window pops open and immediately closes and that is it. It is almost as if a pop-up blocker is running (but it is not enabled). The kicker which has me completely stumped is that if we try the same thing on the Production server, everything works as we would expect. Items of interest: Both servers are in the 'Trusted Sites' No pop-up blocker in IE is activated ActiveX controls for Trusted and Intranet Sites are all enabled. Has anyone experienced something similar? I'm not a Windows administrator so please feel free to explain things as elementary as you see fit.

  Read the article

• Print over the internet from a remote linux session locally (on a Windows 7 machine) to the shared printers?

  - by obeliksz

  I'm trying to use a linux virtual machine as a file server for windows clients. I have successfully implemented remote file sharing (samba+ssh) with which I am able to print locally with a little program that I made for this purpose (jetforms style)... but I would like to hear about a somewhat more direct approach. How can I attach the printers to the server, so that I can for example open a file on the remote session and in the print dialogbox I would see my local printers (on the machine from which I have established a remote session)? I guess there should be some kind of putty tunneling, but dont know how. I have a windows 7 machine locally; there is a CentOS 6 VM over the internet. It has ssh, cups, and samba. I have found a question which asks the opposite: there is a windows based server to connect form linux but that windows has a domain, mine is just a simple windows workstation that is behind NAT and has a dynamic IP. That question is: Print from Linux to Windows networked printer.

  Read the article

• how to throttle http requests on a linux machine?

  - by hooraygradschool

  EDIT: here is the summery: i need to reduce max connections preferably system wide on Ubuntu 11.04 but at least within Google Chrome. i do not need or want to throttle bandwidth, Verizon seems to only care about the number of connections so that is all i want to change. also, i don't want to use firefox unless i have to, i have three other machines all using chrome and synced and i just prefer it over firefox. i use tethering for my home internet connection via my verizon cell phone. without paying for it. this works just fine for streaming netflix via my nintendo wii and pretty much every other conceivable use ive had for it. except, during heavy usage with multiple tabs open on my laptop, the network connection on my phone will just turn off, then on again, then off, but it never fully connects. i think, based on this and other questions that this is caused by verizon getting too many http requests from my phone. is there some software, script, setting or otherwise that would allow me to throttle my requests to say, 5 or 10 or whatever it turns out is 1 less than verizon is looking for, so that my cell's network connection is not lost? i would far prefer a slow down rather than complete shut off of my internet connection. i am almost certain is from quantity of requests and not related to data, because, as i mentioned, netflix will run all day without a hitch, and that uses more data than anything else i would be doing. if i had a router i am pretty sure there are settings i could easily change to only allow so many requests at a time ... but in this case, my phone is my router, so no settings. im using ubuntu 11.04 on my netbook with an htc incredible on verizon (not that the phone details are relevant) i have been trying to figure this out for quite some time, currently the only fix is ensure that all requests are stopped and then sometimes it works again, other times i have to manually turn my 3g service off and then back on. thank you so much for any assistance!

  Read the article

• NOTEPAD++ Need macro or typeitin for automation of large lists

  - by user2526699

  I'm sure there is a way to do this but I can not seem to figure it out. I will try my best to explain this. I have a list with 20,000 lines in notepad++. I have two tabs open in notepad++. The right side tab is the main list. The left side tab is what needs to be added to the beginning of each line in the right tab. Here is an image of my notepad++ to give you a better understanding. I need to be able to do the following in an automated way as I have over 20,000 lines to do this way. copy line 1 of tab 'new 7' switch to tab 'new 6' paste clipboard(line 1 of tab 'new 7') at beginning of line 1 tab 'new 6' switch back to tab 'new 7' copy line 2 of tab 'new 7' switch to tab 'new 6' paste clipboard(line 2 of tab 'new 7') at beginning of line 2 tab 'new 6' I have both pasteitin and typeitin download but if i need some other program/app or if it's built in to notepad++ that would be great. I need to do this by the program itself or for me to only have to press a button to do each of these.

  Read the article

• Windows 7 "freezes" (chills?), and then "unfreezes" for about 1 minute.

  - by gbc001

  Hi, I have an Acer Timeline 1810T netbook (4GB RAM) with Windows 7 x64. About once or twice a day, it "freezes" - the reason i put this in quotation marks is that it does not really freeze, as in you cant move mouse, etc. I can move my mouse and jump between different applications, but I cant use the applications for anything. So I can jump between notepad and Firefox, but I cant browse to a new web page. I have been trying to determine the source of this misery for a while now, and I suspect it has something to do with the hard drive - indirectly if not directly. Here are some screen shots of the resource monitor during a "freeze" and during normal operation: Freeze: http://imgur.com/Gcgq1.jpg Normal operation: imgur.com/mlHaI.jpg As you can see, CPU is fine during freeze, but the disk is going bananas.. Does anyone have an idea of what these reading mean, or about the problem in general? There seems to be no specific activity that sets this off - it can be during browsing, or during media playback with nothing else open. Very appreciative of any help!

  Read the article

< Previous Page | 953 954 955 956 957 958 959 960 961 962 963 964  | Next Page >