Search Results

Search found 19412 results on 777 pages for 'multiple resultsets'.

Page 97/777 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Cisco 891w multiple VLAN configuration

  - by Jessica

  I'm having trouble getting my guest network up. I have VLAN 1 that contains all our network resources (servers, desktops, printers, etc). I have the wireless configured to use VLAN1 but authenticate with wpa2 enterprise. The guest network I just wanted to be open or configured with a simple WPA2 personal password on it's own VLAN2. I've looked at tons of documentation and it should be working but I can't even authenticate on the guest network! I've posted this on cisco's support forum a week ago but no one has really responded. I could really use some help. So if anyone could take a look at the configurations I posted and steer me in the right direction I would be extremely grateful. Thank you! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESI ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings ! aaa new-model ! ! aaa authentication login userauthen local aaa authorization network groupauthor local ! ! ! ! ! aaa session-id common ! ! ! clock timezone EST -5 clock summer-time EDT recurring service-module wlan-ap 0 bootimage autonomous ! crypto pki trustpoint TP-self-signed-3369945891 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-3369945891 revocation-check none rsakeypair TP-self-signed-3369945891 ! ! crypto pki certificate chain TP-self-signed-3369945891 certificate self-signed 01 (cert is here) quit ip source-route ! ! ip dhcp excluded-address 192.168.1.1 ip dhcp excluded-address 192.168.1.5 ip dhcp excluded-address 192.168.1.2 ip dhcp excluded-address 192.168.1.200 192.168.1.210 ip dhcp excluded-address 192.168.1.6 ip dhcp excluded-address 192.168.1.8 ip dhcp excluded-address 192.168.3.1 ! ip dhcp pool ccp-pool import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 10.171.12.5 10.171.12.37 lease 0 2 ! ip dhcp pool guest import all network 192.168.3.0 255.255.255.0 default-router 192.168.3.1 dns-server 10.171.12.5 10.171.12.37 ! ! ip cef no ip domain lookup no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO891W-AGN-A-K9 sn FTX153085WL ! ! username ESIadmin privilege 15 secret 5 $1$g1..$JSZ0qxljZAgJJIk/anDu51 username user1 password 0 pass ! ! ! class-map type inspect match-any ccp-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-all ccp-insp-traffic match class-map ccp-cls-insp-traffic class-map type inspect match-any ccp-cls-icmp-access match protocol icmp class-map type inspect match-all ccp-invalid-src match access-group 100 class-map type inspect match-all ccp-icmp-access match class-map ccp-cls-icmp-access class-map type inspect match-all ccp-protocol-http match protocol http ! ! policy-map type inspect ccp-permit-icmpreply class type inspect ccp-icmp-access inspect class class-default pass policy-map type inspect ccp-inspect class type inspect ccp-invalid-src drop log class type inspect ccp-protocol-http inspect class type inspect ccp-insp-traffic inspect class class-default drop policy-map type inspect ccp-permit class class-default drop ! zone security out-zone zone security in-zone zone-pair security ccp-zp-self-out source self destination out-zone service-policy type inspect ccp-permit-icmpreply zone-pair security ccp-zp-in-out source in-zone destination out-zone service-policy type inspect ccp-inspect zone-pair security ccp-zp-out-self source out-zone destination self service-policy type inspect ccp-permit ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group 3000client key 67Nif8LLmqP_ dns 10.171.12.37 10.171.12.5 pool dynpool acl 101 ! ! crypto ipsec transform-set myset esp-3des esp-sha-hmac ! crypto dynamic-map dynmap 10 set transform-set myset ! ! crypto map clientmap client authentication list userauthen crypto map clientmap isakmp authorization list groupauthor crypto map clientmap client configuration address initiate crypto map clientmap client configuration address respond crypto map clientmap 10 ipsec-isakmp dynamic dynmap ! ! ! ! ! interface FastEthernet0 ! ! interface FastEthernet1 ! ! interface FastEthernet2 ! ! interface FastEthernet3 ! ! interface FastEthernet4 ! ! interface FastEthernet5 ! ! interface FastEthernet6 ! ! interface FastEthernet7 ! ! interface FastEthernet8 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto ! ! interface GigabitEthernet0 description $FW_OUTSIDE$$ES_WAN$ ip address 10...* 255.255.254.0 ip nat outside ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto map clientmap ! ! interface wlan-ap0 description Service module interface to manage the embedded AP ip unnumbered Vlan1 arp timeout 0 ! ! interface Wlan-GigabitEthernet0 description Internal switch interface connecting to the embedded AP switchport trunk allowed vlan 1-3,1002-1005 switchport mode trunk ! ! interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-FE 1$$FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly zone-member security in-zone ip tcp adjust-mss 1452 crypto map clientmap ! ! interface Vlan2 description guest ip address 192.168.3.1 255.255.255.0 ip access-group 120 in ip nat inside ip virtual-reassembly zone-member security in-zone ! ! interface Async1 no ip address encapsulation slip ! ! ip local pool dynpool 192.168.1.200 192.168.1.210 ip forward-protocol nd ip http server ip http access-class 23 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! ip dns server ip nat inside source list 23 interface GigabitEthernet0 overload ip route 0.0.0.0 0.0.0.0 10.165.0.1 ! access-list 23 permit 192.168.1.0 0.0.0.255 access-list 100 remark CCP_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 10.165.0.0 0.0.1.255 any access-list 110 permit ip 192.168.0.0 0.0.5.255 any access-list 120 remark ESIGuest Restriction no cdp run ! ! ! ! ! ! control-plane ! ! alias exec dot11radio service-module wlan-ap 0 session Access point version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESIRouter ! no logging console enable secret 5 $1$yEH5$CxI5.9ypCBa6kXrUnSuvp1 ! aaa new-model ! ! aaa group server radius rad_eap server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa group server radius rad_acct server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa authentication login eap_methods group rad_eap aaa authentication enable default line enable aaa authorization exec default local aaa authorization commands 15 default local aaa accounting network acct_methods start-stop group rad_acct ! aaa session-id common clock timezone EST -5 clock summer-time EDT recurring ip domain name ESI ! ! dot11 syslog dot11 vlan-name one vlan 1 dot11 vlan-name two vlan 2 ! dot11 ssid one vlan 1 authentication open eap eap_methods authentication network-eap eap_methods authentication key-management wpa version 2 accounting rad_acct ! dot11 ssid two vlan 2 authentication open guest-mode ! dot11 network-map ! ! username ESIadmin privilege 15 secret 5 $1$p02C$WVHr5yKtRtQxuFxPU8NOx. ! ! bridge irb ! ! interface Dot11Radio0 no ip address no ip route-cache ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! ssid two ! antenna gain 0 station-role root ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface Dot11Radio0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 bridge-group 2 subscriber-loop-control bridge-group 2 block-unknown-source no bridge-group 2 source-learning no bridge-group 2 unicast-flooding bridge-group 2 spanning-disabled ! interface Dot11Radio1 no ip address no ip route-cache shutdown ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! antenna gain 0 dfs band 3 block channel dfs station-role root ! interface Dot11Radio1.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface GigabitEthernet0 description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router no ip address no ip route-cache ! interface GigabitEthernet0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface GigabitEthernet0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 no bridge-group 2 source-learning bridge-group 2 spanning-disabled ! interface BVI1 ip address 192.168.1.2 255.255.255.0 no ip route-cache ! ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag access-list 10 permit 192.168.1.0 0.0.0.255 radius-server host 192.168.1.5 auth-port 1812 acct-port 1813 key ***** bridge 1 route ip

  Read the article

• One IP, One Port, Multiple Servers

  - by Adrian Godong

  I am looking for a solution to forward one public IP address and one specific port to different machines based on hostname (as of now, I need it only for HTTP). The current setup is NAT on a commodity router (it only provide simple public port to private IP address / port forwarding). I can add a Windows Server 2008 R2 machine before the router if required, but prefer not to do so. So ideally, I would like to have the current setup and the forwarding is done on one of the Windows Servers. Is it possible to do this?

  Read the article

• mysql_upgrade on multiple instances of mysql

  - by Ian

  I'm running 5 instances of mysql (backup replication server), and I need to run mysql_upgrade on server id=3 (port 3303). When i try doing # mysql_upgrade -P3303 The script runs on the #0 (id=0) instance and not #3. Anyone know how I can do this?

  Read the article

• How to display two series via Google Chart API?

  - by Chris

  I can't get the two series of numbers to scale together. Here is sample code that you can paste into... http://code.google.com/intl/en/apis/chart/docs/chart_playground.html cht=lxy chs=400x300 chd=t:20,30,40|1,4,2|24,34,44|3,7,1 chds=20,40,1,4,24,44,1,7 chxr=0,20,54,2|1,0,7,1 chxt=x,y chxs=0,ff0000,12,0,lt 1,0000ff,10,1,lt chco=FF0000,00FF00 chdl=Apples Oranges chtt=Some+Values chts=0000ff,24 Translated: chd=t:s,e,r,i,e,s,1|s,e,r,i,e,s,2|...ors:series1,series2,...ore:series1,series2,... chds=<series_1_min>,<series_1_max>,... chxr=<axis_index>,<start_val>,<end_val>,<step>|... The three varying parameters in question are: chd=t:20,30,40|1,4,2|24,34,44|3,7,1 chds=20,40,1,4,24,44,1,7 chxr=0,20,54,2|1,0,7,1 Can anyone get this simple example working? The chart supports multiple series but for some reason I can't scale it so that the values are displayed within scale. Any help appreciated, Chris

  Read the article

• Resolving ambiguous this pointer in C++

  - by Paul Tevis

  I'm trying to derive a new class from an old one. The base class declaration looks like this: class Driver : public Plugin, public CmdObject { protected: Driver(); public: static Driver* GetInstance(); virtual Engine& GetEngine(); public: // Plugin methods... virtual bool InitPlugin (Mgr* pMgr); virtual bool Open(); virtual bool Close(); // CmdObject virtual bool ExecObjCmd(uint16 cmdID, uint16 nbParams, CommandParam *pParams, CmdChannelError& error); Mgr *m_pMgr; protected: Services *m_pServices; Engine m_Engine; }; Its constructor looks like this: Driver::Driver() : YCmdObject("Driver", (CmdObjectType)100, true), m_Engine("MyEngine") { Services *m_pServices = NULL; Mgr *m_pMgr = NULL; } So when I created my derived class, I first tried to simply inherit from the base class: class NewDriver : public Driver and copy the constructor: NewDriver::NewDriver() : CmdObject("NewDriver", (EYCmdObjectType)100, true), m_Engine("MyNewEngine") { Services *m_pServices = NULL; Mgr *m_pMgr = NULL; } The compiler (VisualDSP++ 5.0 from Analog Devices) didn't like this: ".\NewDriver.cpp", line 10: cc0293: error: indirect nonvirtual base class is not allowed CmdObject("NewDriver", (EYCmdObjectType)100, true), That made sense, so I decided to directly inherit from Plugin and CmdObject. To avoid multiple inheritance ambiguity problems (so I thought), I used virtual inheritance: class NewDriver : public Driver, public virtual Plugin, public virtual CmdObject But then, in the implementation of a virtual method in NewDriver, I tried to call the Mgr::RegisterPlugin method that takes a Plugin*, and I got this: ".\NewDriver.cpp", line 89: cc0286: error: base class "Plugin" is ambiguous if (!m_pMgr->RegisterPlugin(this)) How is the this pointer ambiguous, and how do I resolve it? Thanks, --Paul

  Read the article

• conhost.exe shows multiple times

  - by kimberly montgomery

  I have windows 7 and task mgr shows about 20 conhost.exe's running???????

  Read the article

• Sharing the same `ssh-agent` among multiple login sessions

  - by intuited

  Is there a convenient way to ensure that all logins from a given user (ie me) use the same ssh-agent? I hacked out a script to make this work most of the time, but I suspected all along that there was some way to do it that I had just missed. Additionally, since that time there have been amazing advances in computing technology, like for example this website. So the goal here is that whenever I log in to the box, regardless of whether it's via SSH, or in a graphical session started from gdm/kdm/etc, or at a console: if my username does not currently have an ssh-agent running, one is started, the environment variables exported, and ssh-add called. otherwise, the existing agent's coordinates are exported in the login session's environment variables. This facility is especially valuable when the box in question is used as a relay point when sshing into a third box. In this case it avoids having to type in the private key's passphrase every time you ssh in and then want to, for example, do git push or something. The script given below does this mostly reliably, although it botched recently when X crashed and I then started another graphical session. There might have been other screwiness going on in that instance. Here's my bad-is-good script. I source this from my .bashrc. # ssh-agent-procure.bash # v0.6.4 # ensures that all shells sourcing this file in profile/rc scripts use the same ssh-agent. # copyright me, now; licensed under the DWTFYWT license. mkdir -p "$HOME/etc/ssh"; function ssh-procure-launch-agent { eval `ssh-agent -s -a ~/etc/ssh/ssh-agent-socket`; ssh-add; } if [ ! $SSH_AGENT_PID ]; then if [ -e ~/etc/ssh/ssh-agent-socket ] ; then SSH_AGENT_PID=`ps -fC ssh-agent |grep 'etc/ssh/ssh-agent-socket' |sed -r 's/^\S+\s+(\S+).*$/\1/'`; if [[ $SSH_AGENT_PID =~ [0-9]+ ]]; then # in this case the agent has already been launched and we are just attaching to it. ##++ It should check that this pid is actually active & belongs to an ssh instance export SSH_AGENT_PID; SSH_AUTH_SOCK=~/etc/ssh/ssh-agent-socket; export SSH_AUTH_SOCK; else # in this case there is no agent running, so the socket file is left over from a graceless agent termination. rm ~/etc/ssh/ssh-agent-socket; ssh-procure-launch-agent; fi; else ssh-procure-launch-agent; fi; fi; Please tell me there's a better way to do this. Also please don't nitpick the inconsistencies/gaffes ( eg putting var stuff in etc ); I wrote this a while ago and have since learned many things.

  Read the article

• Multiple vlan issue with procurve switch

  - by Chris-AZ

  I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

  Read the article

• Windows Vista/7: Managing multiple audio playback devices

  - by BrianLy

  I've got speakers (audio in) and headphones (USB headset with it's own soundcard) connected to my desktop computer. Under Windows 7, I can right-click the Audio Mixer and select Playback Devices and toggle between my these devices. Is there an easier way, perhaps a keyboard shortcut, that would make it easier to toggle? I'm working in an shared space were sometimes I want headphones to avoid annoying other people, but at other times speakers are OK. I want to be able to toggle quickly. In an ideal world, the solution to my question would work in Vista too.

  Read the article

• IPMI queries to multiple nodes at once

  - by lorin

  I'm using IPMI to manage some nodes in a cluster. I'd like to be able to submit IPMI queries to all of the nodes in parallel. Something similar to Cluster SSH or tentakel, except that it wraps ipmitool instead of ssh. Are there any tools like that?

  Read the article

• VMWare Network bug in multiple VMWare Workstation versions if using a hardcoded IP address

  - by onyxruby

  I'm having a very tricky problem with some of my VM sessions being unable to reach the Internet or even ping the gateway. I have just set up a new VM Workstation (7) on a W2K8 64bit server (I'll be converting to ESXI 4 once I can find a decent book on it, so for the meanwhile I use workstation). I have imported a number of VM's and setup some new ones on the server.In short the problem with some of the VM's being unable to reach the Internet is that they can't reach the gateway. I've looking at a number of things and can pretty safely rule out the following: Switch, Router, DHCP Server, DNS, Client IP configuration, Routes and typos. The problem is that some of the new clients cannot reach the gateway if their IP address is hardcoded, they can't even ping it by IP address. That rules out DNS and DHCP. Now, if I allow them to get their IP address by DHCP they can reach the gateway and Internet without issue. The interesting thing on this, is that this behavior occurs even if I leave the DNS information hardcoded under TCP/IP settings. It doesn't work unless the IP and gateway are handed out by DHCP even though the same information IP info is being used by the host. Fundamentally from the standpoint of the clients, they are trying to reach the exact same gateway using the exact same IP information regardless of whether they are hardcoded or assigned by DHCP. Here's an example of one client. IP Address 192.168.7.66 - Subnet Mask 255.255.255.0 - Gateway 192.168.7.254 - DNS1 192.168.7.44 - DNS2 192.168.7.254. The issue occurs across six different microsoft operating systems, Windows 7 and Windows 2008 variants all have the issue. My W2K3, XP, Vista and W98 clients all work without issue with hardcoded IP addresses. I have tried things like rearranging the DNS order, flushing DNS and so on. It's not a routing or switch issue as the clients can work just fine if they get their IP by DHCP. It's not a paramater issue as the exact same paramaters are handed out by DHCP as I plug in by hand. It's not a DNS issue as clients cant reach other clients even with IP addresses only. I have run a tracert to the gateway by IP address and it times out on the very first hop before failing on hop3 with destination host unreachable. If I get the IP address by DHCP the tracert finds the gateway (and Internet) without issue. I have read a few other posts online in forums talking about this problem randomly occuring over the years in other VM versions as well, so I suspect some kind of long standing bug. Does anyone have any ideas on this? Is it possibly a bug with Windows 7 and W2K clients under VM?

  Read the article

• SSH: Tunnel multiple ports to remote server

  - by user1594322

  See attached diagram. Host A - Windows server Host B - Linux server Host C - VMWare ESXi server From host A I can SSH to host B over the VPN tunnel. I can ping host C from host B, but not from host A. I am assuming this is because host C has lost its default gateway. Host C is a VMWware ESXi server, so I would need to tunnel several ports (80,443,902) in order to reach host C from host A. What is the correct ssh syntax to create the tunnel in order to reach host C from host A, and can I do it using a single command, or do I need to run three commands (one for each port, 80,443,902)?

  Read the article

• IPcop Multiple WAN Subnets

  - by obsidian

  We have an IPcop firewall and have had no issues with it. We've had a block of 10 IP addresses from our colocation provider and have been able port forward from those to internal servers as needed. We've recently needed additional IPs and the colocation provider issued an additional block of 10. The problem: The 10 new IP addresses issued are in a different subnet with a different gateway. The question: How do I add the new gateway into IPcop? How do I make it so that any outbound traffic in response to any inbound traffic from a new IP go back out through the new gateway? I attempted to add a static route via the console using the following command: route add -net x.x.x.x gw x.x.x.x netmask 255.255.255.192 I also added the new IPs as aliases and setup port forwarding as I've done with the existing IP block. However, when I attempt to access a web server from an external workstation, it just times out. Thanks in advance for your assistance.

  Read the article

• Combine multiple unix commands into one output

  - by Ben McCormack

  I need to search our mail logs for a specific e-mail address. We keep a current file named maillog as well as a week's worth of .bz2 files in the same folder. Currently, I'm running the following commands to search for the file: grep [email protected] maillog bzgrep [email protected] *.bz2 Is there a way combine the grep and bzgrep commands into a single output? That way, I could pipe the combined results to a single e-mail or a single file.

  Read the article

• Rails + Nginx + Unicorn multiple apps

  - by Mikhail Nikalyukin

  I get the server where is currently installed two apps and i need to add another one, here is my configs. nginx.conf user www-data www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Disable unknown domains ## server { listen 80 default; server_name _; return 444; } ## # Virtual Host Configs ## include /home/ruby/apps/*/shared/config/nginx.conf; } unicorn.rb deploy_to = "/home/ruby/apps/staging.domain.com" rails_root = "#{deploy_to}/current" pid_file = "#{deploy_to}/shared/pids/unicorn.pid" socket_file= "#{deploy_to}/shared/sockets/.sock" log_file = "#{rails_root}/log/unicorn.log" err_log = "#{rails_root}/log/unicorn_error.log" old_pid = pid_file + '.oldbin' timeout 30 worker_processes 10 # ????? ???? ? ??????????? ?? ????????, ???????? ??????? ? ??????? ???? ???? listen socket_file, :backlog => 1024 pid pid_file stderr_path err_log stdout_path log_file preload_app true GC.copy_on_write_friendly = true if GC.respond_to?(:copy_on_write_friendly=) before_exec do |server| ENV["BUNDLE_GEMFILE"] = "#{rails_root}/Gemfile" end before_fork do |server, worker| defined?(ActiveRecord::Base) and ActiveRecord::Base.connection.disconnect! if File.exists?(old_pid) && server.pid != old_pid begin Process.kill("QUIT", File.read(old_pid).to_i) rescue Errno::ENOENT, Errno::ESRCH end end end after_fork do |server, worker| defined?(ActiveRecord::Base) and ActiveRecord::Base.establish_connection end Also im added capistrano to the project deploy.rb # encoding: utf-8 require 'capistrano/ext/multistage' require 'rvm/capistrano' require 'bundler/capistrano' set :stages, %w(staging production) set :default_stage, "staging" default_run_options[:pty] = true ssh_options[:paranoid] = false ssh_options[:forward_agent] = true set :scm, "git" set :user, "ruby" set :runner, "ruby" set :use_sudo, false set :deploy_via, :remote_cache set :rvm_ruby_string, '1.9.2' # Create uploads directory and link task :configure, :roles => :app do run "cp #{shared_path}/config/database.yml #{release_path}/config/database.yml" # run "ln -s #{shared_path}/db/sphinx #{release_path}/db/sphinx" # run "ln -s #{shared_path}/config/unicorn.rb #{release_path}/config/unicorn.rb" end namespace :deploy do task :restart do run "if [ -f #{unicorn_pid} ] && [ -e /proc/$(cat #{unicorn_pid}) ]; then kill -s USR2 `cat #{unicorn_pid}`; else cd #{deploy_to}/current && bundle exec unicorn_rails -c #{unicorn_conf} -E #{rails_env} -D; fi" end task :start do run "cd #{deploy_to}/current && bundle exec unicorn_rails -c #{unicorn_conf} -E #{rails_env} -D" end task :stop do run "if [ -f #{unicorn_pid} ] && [ -e /proc/$(cat #{unicorn_pid}) ]; then kill -QUIT `cat #{unicorn_pid}`; fi" end end before 'deploy:finalize_update', 'configure' after "deploy:update", "deploy:migrate", "deploy:cleanup" require './config/boot' nginx.conf in app shared path upstream staging_whotracker { server unix:/home/ruby/apps/staging.whotracker.com/shared/sockets/.sock; } server { listen 209.105.242.45; server_name beta.whotracker.com; rewrite ^/(.*) http://www.beta.whotracker.com/$1 permanent; } server { listen 209.105.242.45; server_name www.beta.hotracker.com; root /home/ruby/apps/staging.whotracker.com/current/public; location ~ ^/sitemaps/ { root /home/ruby/apps/staging.whotracker.com/current/system; if (!-f $request_filename) { break; } if (-f $request_filename) { expires -1; break; } } # cache static files :P location ~ ^/(images|javascripts|stylesheets)/ { root /home/ruby/apps/staging.whotracker.com/current/public; if ($query_string ~* "^[0-9a-zA-Z]{40}$") { expires max; break; } if (!-f $request_filename) { break; } } if ( -f /home/ruby/apps/staging.whotracker.com/shared/offline ) { return 503; } location /blog { index index.php index.html index.htm; try_files $uri $uri/ /blog/index.php?q=$uri; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php-fastcgi/php-fastcgi.socket; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } location / { proxy_set_header HTTP_REFERER $http_referer; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_max_temp_file_size 0; # If the file exists as a static file serve it directly without # running all the other rewite tests on it if (-f $request_filename) { break; } if (!-f $request_filename) { proxy_pass http://staging_whotracker; break; } } error_page 502 =503 @maintenance; error_page 500 504 /500.html; error_page 503 @maintenance; location @maintenance { rewrite ^(.*)$ /503.html break; } } unicorn.log executing ["/home/ruby/apps/staging.whotracker.com/shared/bundle/ruby/1.9.1/bin/unicorn_rails", "-c", "/home/ruby/apps/staging.whotracker.com/current/config/unicorn.rb", "-E", "staging", "-D", {5=>#<Kgio::UNIXServer:/home/ruby/apps/staging.whotracker.com/shared/sockets/.sock>}] (in /home/ruby/apps/staging.whotracker.com/releases/20120517114413) I, [2012-05-17T06:43:48.111717 #14636] INFO -- : inherited addr=/home/ruby/apps/staging.whotracker.com/shared/sockets/.sock fd=5 I, [2012-05-17T06:43:48.111938 #14636] INFO -- : Refreshing Gem list worker=0 ready ... master process ready ... reaped #<Process::Status: pid 2590 exit 0> worker=6 ... master complete Deploy goes successfully, but when i try to access beta.whotracker.com or ip-address i get SERVER NOT FOUND error, while others app works great. Nothing shows up in error logs. Can you please point me where is my fault?

  Read the article

• Redirect audio from multiple Terminal Services sessions

  - by DougN

  When logged into a Remote Desktop session, you can request the audio be brought to the local computer (redirected audio). You hear the audio generated by your session. Is there anyway to have the audio generated by other sessions also redirected and forwarded to the local computer?

  Read the article

• Using dnsmasq for accessing multiple nameservers assigned by DHCP

  - by Ash

  At my work desktop running openSUSE 11.4, I have a local network which gets its address, domain (work.site) and nameservers (10.100.1.1, 10.100.1.2) info through DHCP - which get written into /etc/resolv.conf I get to access the internet using the work network, and these 2 nameservers end up returning the entries for any public domain name lookups on the internet. I also have a private VPN that I end up connecting. The nameserver (10.111.1.1) and domain (private.site) are rarely bound to change for this network, but currently they're pushed by the openVPN client into networkmanager, and which also gets merged with the existing /etc/resolv.conf My resolv.conf ultimately ends up looking like this: search private.site work.site nameserver 127.0.0.1 nameserver 10.111.1.1 nameserver 10.100.1.1 As you can see the 2nd nameserver from my work network was pushed out because of the max 3 entry limitations. It is fine still, but would be a problem if that nameserver goes down for maintenance or something. So I found out that dnsmasq could help me here, and hence I setup dnsmasq just as a local DNS resolver without any DHCP support. So right now this is my /etc/dnsmasq.conf: resolv-file=/etc/resolv.conf server=/private.site/10.111.1.1 server=/1.111.10.in-addr.arpa/10.111.1.1 listen-address=127.0.0.1 bind-interfaces log-queries I've made dnsmasq get the list of nameservers from /etc/resolv.conf since NetworkManager seems to be updating this list correctly (for a max of 3 nameservers). I'm able to resolve the host names in both the networks correctly. So these are the questions I have: Is there a way I can make either NetworkManager or dhclient write out the list of nameservers somewhere else which I can make dnsmasq use as resolv-file ? How do I make dnsmasq use certain nameservers as the default for all queries ? Right now I notice that lookups for public domains on the internet are usually sent to both the nameservers - the one on work.site as well as private.site. It would be good if I can limit this only to work.site.

  Read the article

• Split Excel worksheet into multiple worksheets based on a column with VBA (Redux)

  - by Ceeder

  I'm rather new to VBA and I've been working with the code generously displayed and explained by Nixda: Split Excel Worksheet... My only challenge is I've been trying desperately to find a way to include the top 3 rows as a title bu it seems to only allow for one. Here's the code have: Dim Titlesheet As Worksheet iCol = 23 '### Define your criteria column strOutputFolder = (Sheets("Operations").Range("D4")) '### <--Define your path of output folder Set ws = ThisWorkbook.ActiveSheet Set rngLast = Columns(iCol).Find("*", Cells(3, iCol), , , xlByColumns, xlPrevious) Set Titlesheet = Sheets("Input") ws.Columns(iCol).AdvancedFilter Action:=xlFilterInPlace, Unique:=True Set rngUnique = Range(Cells(4, iCol), rngLast).SpecialCells(xlCellTypeVisible) If Dir(strOutputFolder, vbDirectory) = vbNullString Then MkDir strOutputFolder For Each strItem In rngUnique If strItem < "" Then Sheets("Input").Select Range("A1:V3").Select Selection.Copy ws.UsedRange.AutoFilter Field:=iCol, Criteria1:=strItem.Value Workbooks.Add Sheets("Sheet1").Select ActiveSheet.PasteSpecial ws.UsedRange.SpecialCells(xlCellTypeVisible).Copy Destination:=[A4] strFilename = strOutputFolder & "\" & strItem ActiveWorkbook.SaveAs Filename:=strFilename, FileFormat:=xlWorkbookNormal ActiveWorkbook.Close savechanges:=False End If Next ws.ShowAllData Is there something I can change to include these lines? Thanks so much, this code provided by Nixda has taught me a great deal!

  Read the article

• Why does rsync spawn multiple processes for me?

  - by Yoga

  I am using the following cron statement to backup from one folder to another folder in the same machine: 19 21 * * * root rsync -ac --delete /source/folder /dest/folder When I use pstree, I see the cron forked three processes +-cron---cron---rsync---rsync---rsync And ps 9972 ? Ds 1:00 rsync -ac --delete /source/folder /dest/folder 9973 ? S 0:29 rsync -ac --delete /source/folder /dest/folder 9974 ? S 0:09 rsync -ac --delete /source/folder /dest/folder Why are three processes? Can I limit to only one?

  Read the article

• Perforce Restore From Multiple Checkpoint Files?

  - by AJ

  Hi all, I am working with a very large (~11GB) checkpoint file and trying to do a -jr (journal restore) operation. About half way through the file, I'm hitting an entry which causes an error to occur. I'm unable to come up with a conventional way to print, edit, and save changes to the offending line. So right now I'm splitting the checkpoint into files of 500k lines each...up to 47 files and counting. My question is, once I have these separate files: Can I run journal restore on each one separately to check for errors? Once fixed, is it necessary to merge them back together again to do my full journal restore? Any other ideas on how to tackle this problem would be appreciated. Thanks in advance, -aj

  Read the article

• Network cabling with multiple patch panels?

  - by dannymcc

  I am in the very early stages of planning a network cabling upgrade in our office, mainly to upgrade the old cables from Cat5 to either 5e or 6. I am also planning on upgrading all of our 10/100 switches to 10/100/1000 switches. I would like to have three small wall mounted cabinets spread around the building, each with a patch panel and switch. These would all lead back to our server room. The question is; should I have two patch panels in each wall cabinet, one with 24 or 48 ports that are connected to a matching patch panel in the server room. The second patch panel would then link to each device in that cabinets area. Then I wouldn't put a switch in the small cabinets. All switching would be done in the server room. Or, should I have one main cable from the server room to each of the cabinets - plugged straight into the switch and the patch panel is for devices in the cabinets area? I hope that makes sense!

  Read the article

• Assigning multiple IPv6 addresses on a Server

  - by andrewk

  Let me uncover my intent. My host provides hundreds of IPV6 addresses free, but charge for an IPV4 address. I have several sites under one server and I was wondering if I can give each site/domain it's own ipv6 address. Is that even possible? If so how? I've read quite a bit about ipv6 but I do not understand it as clear as I'd like. My main goal is, for each domain/site to have it's own unique IP, so someone can't do a reverse ip look up and see what sites I have on that server. Thanks in advance for the patience.

  Read the article

• Use multiple WSGI mount points in Apache with an Nginx reverse proxy

  - by Thomas

  I am trying to set up multiple virtual hosts on the same server with Nginx and Apache and have run into a curious configuration issue. I have nginx is configured with a generic upstream to apache. upstream backend { server 1.1.1.1:8080; } I'm trying to set up multiple subdomains in nginx that hit different mountpoints in apache. Each would act like the following examples. server { listen 80; server_name foo.yoursite.com; location / { proxy_pass http://backend/bar/; include /etc/nginx/proxy.conf; } ... } server { listen 80; server_name delta.yoursite.com; location / { proxy_pass http://backend/gamma/; include /etc/nginx/proxy.conf; } ... } These mountpoints are pointed at django projects, however each of the url entries are coming back prepended with the apache mountpoint path. So, if I called the django url entry for foo.yoursite.com/wiki/biz/, django appears to be returning foo.yoursite.com/bar/wiki/biz/. Similarly, if I call for the url entry for delta.yoursite.com/wiki/biz/, I get delta.yoursite.com/gamma/wiki/biz/. Is there any way get rid of the prefix being returned on the url entries by django and apache?

  Read the article

• Multiple syslog-ng destination loghosts

  - by pablo808

  I am currently forwarding logs to one remote destination loghost. filter f_windows { program("Security-Audit*"); }; log { source(r_sys); filter(f_windows); destination(d_windows); }; log { source(r_sys); filter (f_windows); destination(d_loghost); }; I would like to forward these logs to two additional remote destination loghost's. The manual defines destination syntax as: destination <identifier> { destination-driver(params); destination-driver(params); ... }; Tried these different configs: Define additional destinations hosts in d_loghost: destination d_loghost { udp("server1" port(514)); udp("server2" port(514)); udp("server3" port(514));}; filter f_windows { program("Security-Audit*"); }; log { source(r_sys); filter (f_windows); destination(d_loghost); }; Define addtional destination hosts in their own d_loghost definitions: destination d_loghost1 { udp("server1" port(514)); destination d_loghost2 { udp("server2" port(514)); destination d_loghost3 { udp("server3" port(514)); filter f_windows { program("Security-Audit*"); }; log { source(r_sys); filter (f_windows); destination(d_loghost1); }; log { source(r_sys); filter (f_windows); destination(d_loghost2); }; log { source(r_sys); filter (f_windows); destination(d_loghost3); }; Both fail unfortuantly, what am I missing? Thanks.

  Read the article

• How do I host multiple independent, secured SharePoint sites (WSS 3.0) without using Active Director

  - by Kyle Noland

  I have a SharePoint site set up on one of my networks to service Active Directory users. To be clear, this is a Windows SharePoint Services 3.0 installation running on Windows Server 2003 Standard. It is not an option to upgrade the server or SharePoint version. Management would like to create several new sites, one for each of a handful of clients. These sites will be used like "dropboxes" or FTP sites so that my company can make large files available to outside contacts, and vice versa. Here are my requirements: I do not want to have to create Active Directory accounts for each external contact. If possible, I would like to store the external usernames and passwords in a database that I can write a small GUI for so that management can handle adding their own external contacts. Each client site must be sandboxed from each other and from my main company SharePoint site. I would like to keep everything running on port 80 and be able to access the sites as either clientname.mycompany.com or www.mycompany.com/clientname If anybody has ever done this I would really appreciate hearing about any lessons you learned and suggestions for how to set this up. Kyle

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >