Search Results

Search found 29159 results on 1167 pages for 'xml configuration'.

Page 988/1167 | < Previous Page | 984 985 986 987 988 989 990 991 992 993 994 995  | Next Page >

• p410i Mirror failed couldnt find same disk

  - by Heishiro Mitsurugi

  I have an HP server with an P410i RAID Card installed. I had two SATA Drives connected (250GB each). The RAID was configured as a Mirror. A few days ago the drive one (1) failed, and i had to remove it. Tried to find the same part number here in Venezuela, but i couldn't. So, i bought a 500GB SATA Drive, and connected it to the same bay where the 250GB failed drive was. When the server booted, it asked me if i wanted to rebuild the data. I selected the option for that, and Windows Server restarted properly. When i got into the ACU (Array Configuration Utility) it told me that it was rebuilding the data. Today the warning went away, and according to the ACU everything is just fine. My question is... What i did was right? Can i create a mirror from a 250GB disk in a 500GB disk using the p410i? I have done that before, but only using software RAID in Windows, and it just uses the space it needs. As a matter of fact, when did that using Windows i was able to use the remaining space in the bigger drive, but in the p410i i can't use it. Should i be worried? Thanks a lot in advance for any pointers or info that you could give on this. Heishiro

  Read the article

• Incoming traffic while on public network

  - by zvikico

  I'm developing a web app and I need to be able to get incoming traffic from 3rd party services I use. This is a classic webhooks situation: I send a request with a return address and receive the response (via HTTP) some time later to the given address. The simple solution would be to provide my external IP address and forward the incoming traffic from the router to my machine. However, I'm working in a large office and I cannot control the router configuration. I'm looking for a different way to achieve that. I do have servers online. I can have a daemon running on one of those servers, which will handle the incoming traffic. I can run a parallel daemon on my machine, which will keep an open connection with the remote daemon (over ssh preferred) and when an inbound traffic is received by the remote, it will send it to the local, which will send it to the correct port on my machine, as if it was received in the natural way. Is there any ready-made solution for that? PS. I'm on OS X and my server is Ubuntu. Thanks, zvikico

  Read the article

• apache front-end rewriting URL to different https ports?

  - by khedron

  Hi all, One of my users is having some trouble with forwarding to an internal web app from a public address. Everything worked fine for him when the situation was like this: front page: http://www.myexample.com/ public ref to internal app: http://www.example.com/app-8903/app.html secretly goes to: http://secret.example.com:8903/app-8903/app.html This is to say, my user is providing the very last URL, with the port information duplicated in the URL base, and they were using that to give a public face that hid both the port and the internal machine name. You could still read the port in the URL base if you looked, but the obvious reference and machine name were hidden. Doing it this way, he could have several different instances of the application running on secret.example.com with different ports, and on the front end it just looked like it was changing the URL directory/base. Now the user wants to do the same thing over https:, and the people helping him with apache config say it can't be done. Is that so? Without being there to tinker with the configuration myself, I'm not sure what his IT people have tried, but reading through the apache2 SSL FAQ and other docs, it seems like it should be possible to rewrite URLs to different ports and still use https:.

  Read the article

• Could I have destroyed Partitioning-Scheme/Filesystem of HDDs with External Harddrive Case with builtin Raid-Controller?

  - by th3m3s

  I had just recently bought a Fantec QB-35US3R to have a nice box on my desk to make some backups to. Along with the HDD-Bay I had ordered some 4TB HDDs to let them run in Raid 5, which is handled by the hardware RAID controller of the Fantec HDD-Bay. The QB-35US3R arrived a few days before the hard drives, so I got impatient and had the idea to put three old 1TB disks in the Fantec device, just to test it... Long story short: I made a backup of the most important data on these three disks before they broke. I had set the configuration scheme to RAID 3 at the Fantec device. It seems, that the Fantec RAID controller has "somehow" destroyed the partitioning scheme or the file system, because when put into a HDD docking station, they get recognized by the OS (Ubuntu/Linux) but are not mountable anymore. I tried to recover the data from one HDD via gParted (parted), which ran some hours without success. Here I stopped, before trying other tools, cos I read that the longer a hard drive is running after a the partitioning got destroyed, the worse it gets. What could the HDD-Bay probably have done to my lovely hard drive disks? Is there some routine a RAID controller is executing, when it wants to create a RAID system? Like erasing the partition table (seems not plausible to me.) or writing some information to every hard drive in the RAID (seems more likely to me.)? Is there a chance to recover the data from these HDDs, or is the change a RAID controller makes so significant, that no software is of help?

  Read the article

• Nginx and 1000 WordPress Installs - Optimization

  - by GTE

  Hey, I'm trying to create a rather unusual (imo) configuration where I have: nginx php-fastcgi mysql 1000 seperate WordPress installs (with WP Super Cache). Each WP install corresponds to a seperate subdomain. Furthermore, I have 1000 cron jobs being called every hour that in turn call a WP plugin (using wget) which retrieves data from an API and posts it to the respective blog. This is all being run on a virtual server with 1024MB of RAM, 4 shared processors, etc. The server is not doing well, especially during the times that the cron jobs are being executed. Nginx constantly throws 504 errors and the site has a significant lag. 1) Am I crazy for having 1000 individual WP installs? Should I be using WP-MU and will this help significantly? (I have certain plugin restrictions that I prefer having seperate installs but could switch if need be.) 2) Instead of having 1000 unique cron jobs - should be calling say a bash script that will then process the 1000 HTTP requests I need? Could this be done in a succesive order instead of a sequential one? 3) Any other kind of suggestion you may have for optimization? Should I be proxying to Apache instead of just using nginx, etc. Any kind of advice would be appreciated. Thanks in advance

  Read the article

• Apache mod_disk_cache on a seperate drive

  - by pavs

  how can I set Apache mod_disk_cache on a separate drive from where the OS/Apache is installed? I have set up this on my apache2.conf: <IfModule mod_cache_disk.c> # cache cleaning is done by htcacheclean, which can be configured in # /etc/default/apache2 # # For further information, see the comments in that file, # /usr/share/doc/apache2/README.Debian, and the htcacheclean(8) # man page. # This path must be the same as the one in /etc/default/apache2 CacheRoot /media/cacheHD # This will also cache local documents. It usually makes more sense to # put this into the configuration for just one virtual host. CacheEnable disk / # The result of CacheDirLevels * CacheDirLength must not be higher than # 20. Moreover, pay attention on file system limits. Some file systems # do not support more than a certain number of inodes and # subdirectories (e.g. 32000 for ext3) CacheDirLevels 2 CacheDirLength 1 </IfModule> and it doesn't seem to be caching anything at all. The drive itself is a freshly installed ssd drive formatted with ext4.

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• NginxHttpAuthBasicModule with Sinatra & Passenger

  - by scainey

  Hi, I'm serving static pages from a Sinatra application using Nginx. I've implemented Basic Authentication for one page on the site using NginxHttpAuthBasicModule, the authentication succeeds but Nginx doesn't resolve the link. Error log gives - 2010/03/22 12:15:19 [error] 7143#0: *2902 open() "/home/me/live/mysite_home/public /mypage" failed (2: No such file or directory), client: 82.71.18.122, server: mysite.com, request: "GET /mypage HTTP/1.1", host: "mysite.com" The actual file is found at: /home/me/live/mysite_home/live/mypage.erb The configuration file is: server { listen 80; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } server { listen 443; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; ssl on; ssl_certificate /etc/nginx/conf/certs/server.crt; ssl_certificate_key /etc/nginx/conf/certs/server.key; keepalive_timeout 70; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } Not sure if this is a Sinatra, Passenger or Nginx thing, or if I'm just missing something.

  Read the article

• Connection reset to some websites

  - by user143271

  I'm using a 2wire 3600HGV modem/router. Starting around this afternoon, any time I try to access anything from i.imgur.com I get The connection to i.imgur.com was interrupted in chrome, and the actual error is Error 101 (net::ERR_CONNECTION_RESET). It's network wide (tested multiple browsers on multiple computers and phones). I can access imgur.com just fine, but nothing from its content server i.imgur.com. If I disable wifi on my phone and use its 4G connection, I can access it just fine, so obviously imgur isn't down. I haven't changed any configuration on the router, and I have tried changing DNS servers (I tried google and OpenDNS). It also seems that imgur is not the only site; howtogeek and a couple of others seem to have the same problem. It looks like they are all edgecast cdn content servers, but not all edgecast cdn servers fail. Tumblr, for instance, works just fine. Does anyone have any idea what would be causing this? EDIT: Related to the edgecast remark, it would appear that this is a specific edgecast server: gs1.wpc.edgecastcdn.net. Tumbler's content is on gs1.wac.edgecastcdn.net, so it might be on a different server. Edit #2: These sites all respond to ping just fine as well.

  Read the article

• Windows 7 clean install becomes corrupt after reboot (repeated many fresh installs)

  - by pjotr_dolphin

  My laptop keeps crashing on boot after clean Windows 7 install. Ok, here is the story, and some fact. Computer: Samsung NP900X3C-A04HK (256GB SSD, 8GB RAM) OS to install: Windows 7 Ultimate SP1 (not from Samsung, own fresh Win) I purchased this laptop about a year ago, never booted it into the Windows Home that was installed on it, installed directly Ubuntu on the machine. Full disc encryption was the selected install, so of course it wiped the complete disc (including Samsung Recovery Partition). After some time, I felt like going back to Windows, as Windows 7 is actually quite nice. So I went to buy a fresh Windows 7Ultimate with SP1. Now to the tricky part. Windows installs perfectly, and after installing all Windows updates, drivers from Samsung, software I need, it is time for shutting it down and go to bed. Starting it up again, and it is not booting, these are the type of errors I have gotten so far (fresh installed it more then a dozen times now, and tried different suggestions from threads on the net). Windows failed to start... Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. File: /boot/bcd Status: 0xc000000f Info: an error occurred while attempting to read the boot configuration data. And some other errors, not all the same. Not memory of this. I have run different disc checks, and all says my SSD is in perfect shape. Note: Soft reboots from Windows menu works, never gets corrupted. But if I Shutdown and then start it up again, this is when it happens. Can someone help me not get back to Ubunut? What can be the cause, and how can it be fixed so I do not get there problems again?

  Read the article

• WebSphere hung threads, how can I track then down?

  - by Puzzled

  We have an application running on WebSphere (unfortunately it is 6.1 which is no longer supported, it has not yet been migrated in production to a later version) which becomes entirely unresponsive because of hung threads. As far as I can tell we entirely exhaust one of the thread pools. I have activated hung thread detection and I get a core/thread dump when hung threads are detected. The server can run for several days without problems but has crashed twice this week. When load the core/thread dump in "IBM Thread and Monitor Dump Analyzer for Java", it tells me that there are a certain number of hung threads (this time it was 2, last time 11) and multiple (usually around 40) threads "waiting on condition" and some running threads. I believe one of the thread pool has around that size (50). Now what I see in there are threads waiting for locks, having locks or in wait. Most of them show a stack track which always ends like this: at java/lang/Object.wait(Native Method) at java/lang/Object.wait(Object.java:231) Now, how can I track this down to either a server configuration problem, application issue, WebSphere problem or something else? How is this supposed to help me track down the problem when almost everything in there refers to IBM code? I cannot ask IBM's help as 6.1 is now an unsupported version of WebSphere and while work has been done to make it work under WebSphere 7 we are not yet ready to switch to it in Production yet.

  Read the article

• Monitoring Between EC2 Regions

  - by ABrown

  I'm working on a small EC2 project that involves a handful of servers in two different regions (US East and EU West). My first task is to implement a Nagios monitoring solution. Monitoring within a region is simple - I just use the private domain names/IPs, but I'm a little unsure of the best way to handle monitoring the second region without setting up a second Nagios install. The environment is fairly static, so I'm not going to be scripting the configuration with the EC2 tools just yet. As I see it, I have two options. Two Nagios installations (which is over-kill for the small number of servers I'm dealing with). Pros: I don't have to alter the group permissions nor do I have to pay for the traffic, redundancy in the monitoring solution - I could monitor the Nagios servers. Cons: two installations to deal with and I'd need to run another server instance. Have the single installation monitor both regions. Pros: one installation to deal with. Cons: slightly reduced security - security group will have to have NRPE (5666) opened for one source IP and also paying for a small amount of bandwidth at the Internet rate for data transfer between the regions. I guess my question is - how have others handled this problem and what are your recommendations? Thanks!

  Read the article

• Formatting a former RAID 0 drive through USB

  - by EXC

  I'll try to be as specific as possible here: I was using two Hitachi 2.5" 500 gb HDDs in my Gateway P-7805u laptop in a RAID 0 configuration. The array was causing the laptop to run extremely hot, however, so I removed them and deleted the RAID array through Intel Matrix HDD manager. I did a clean install of Windows 7 on the original 320 gb HDD that came with the laptop. I never did format the original RAID array HDDs before taking them out of the computer. Now, I am attempting to format the Hitachi 500 gb RAID array HDDs externally through a USB external enclosure. The external HDD drivers install on my clean install OS, but when I go into 'My Computer' there is no external drive available. I cannot format in CMD Prompt because my computer will not designate a drive letter to the external HDD. The drivers install and the HDD is recognized as a Hitachi external drive, but nothing seems to show up in my computer window. I need to know if there is a way to format these drives to NTFS externally.

  Read the article

• vmware server 64 bit on ubuntu 9.10 64 bit with P2V windows 2003 SBS poor network speed

  - by RobertHC

  configuration is ubuntu 2.6.31-21 64 bit vmware 2.0.2 64 bit last release hardware is core 2 quad with 8GB ram guest is win 2003 server SBS 32 bit Dear friends, we have a converted physical to virtual windows sbs 2003, converted with last converter available nowadays http://www.vmware.com/products/converter/ vCenter converter. Running the P2V 2K3 SBS on vmware server, it does boot fine, but we do note an abnormal CPU activity and a poor lan speed. As attempts we did what follow. We removed all unneeded peripherals, we removed one NIC (phisycal server was 2 nics), we changed the vmx to ged the nic recognized as intel instead than amd, we removed 1 cpu (physical was 2 cpu), we removed anything was reported as failed driver from system events monitor. Nothing to do, no way and funny results. Let's read some tests results. All are made with the same file copied in different source folders. Copying from client side (both directions copy, to/from server) results are i.e. 10 seconds, copying the same files from server side (again from and to server) results are different... from client to server, speed is round about (bit more) 10 seconds, but from server to client direction is slower: double the time. Beeing very fast and launching a simultaneous copy "from server to client"+"from client to server", this made from the server side, results in a stuck traffic... 45 seconds to do the copy. vmware tools are installed and e1000 driver has been updated. With one processor CPU activity is still going up and down but much less than with two. Because of test, we installed win 2k8 STD 64 bit. We repeated all the above tests with exactly the same file result is just one: always 5 seconds (this matches the lan speed) Any idea about this issue is welcome and thank you if any. Kind regards R.

  Read the article

• Global Email Forwarding with EXIM?

  - by Dexirian

  Been trying to find a solution to this for a while without success so here i go : I was given the task to build a High-Availability Load-Balanced Network Cluster for our 2 linux servers. I did some workaround and managed to get a DNS + SQL + Web Folders + Mails synchronisation going between both. Now i would like my server 2 to only do mailing and server 1 to only do web hosting. I transfered all the accounts for 1 to 2 using the WHM built-in account transfert feature. I created 2 different rsync jobs that sync, update, and delete the files for mail and websites. Now i was able to successfully transfer 1 mail accounts from 1 to 2, and the server 2 works flawlessly. All i had to do was change the MX entries to point to the new server and bingo. Now my problem is, some clients have their mail softwares configured so that they point to oldserver.domain.com. I cant make the (A) entry of oldserver.domain.com point to the new server for obvious reasons. I thought of using .foward files and add them to the home directories of the concerned users but that would be very difficult. So my question is : Is there a way to configure exim so that it will only foward mails to the new server? I need to change all the users so they use their mail on server 2 without them doing anything. Thanks! EDIT : TO CLARIFY MY PROBLEM Some clients have their mail point to oldserver.xyz instead of mail.olderserver.xyz I want to know if i can do something to prevent modifying the clients configuration I would also like to know is there is a way to find out what clients aren't properly configured

  Read the article

• NginxHttpAuthBasicModule with Sinatra & Passenger

  - by scainey

  I'm serving static pages from a Sinatra application using Nginx. I've implemented Basic Authentication for one page on the site using NginxHttpAuthBasicModule, the authentication succeeds but Nginx doesn't resolve the link. Error log gives - 2010/03/22 12:15:19 [error] 7143#0: *2902 open() "/home/me/live/mysite_home/public /mypage" failed (2: No such file or directory), client: 82.71.18.122, server: mysite.com, request: "GET /mypage HTTP/1.1", host: "mysite.com" The actual file is found at: /home/me/live/mysite_home/live/mypage.erb The configuration file is: server { listen 80; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } server { listen 443; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; ssl on; ssl_certificate /etc/nginx/conf/certs/server.crt; ssl_certificate_key /etc/nginx/conf/certs/server.key; keepalive_timeout 70; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } Not sure if this is a Sinatra, Passenger or Nginx thing, or if I'm just missing something.

  Read the article

• USB Drive that simultaneously connects to more than one computer

  - by user2499

  Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

  Read the article

• php mail() function painfully slow on local development machine

  - by Michael B

  Background: If you have set up a local apache server for development purposes you may have run into the problem where sendmail takes a long time (at least one minute) to send emails. This is extremely frustrating if you are trying to debug a problem with an email you have generated. There are several forum posts on the internet that discuss this problem. However, none of theme described what to do in enough detail for my limited knowledge. Here are the steps that worked for me: 1) find your hostname (in case you've forgotten it) using this command: :~$ cat /hosts/hostname myhostname 2) edit the file /etc/hosts and make sure the first line is the following: 127.0.0.1 localhost.localdomain localhost myhostname 3) edit the sendmail configuration file ( /etc/mail/sendmail.cf in Ubuntu) and Uncomment the line #O HostsFile=/etc/hosts 4) Restart the computer. The computer should boot up much faster now and the mail() function should return almost immediately. HOWEVER, the emails won't actually be sent unless you follow step 5. 5) You must new use the sendmail '-f' option whenever using the mail function. For example: mail('[email protected]', 'the subject', 'the message', null, '[email protected]'); My question for my fellow serverfaulters is: What further changes can be made so that I don't have to use the sendmail -f option? Although it's not very hard to add the -f option, it is a problem when your CMS (such as Drupal) does not use the -f option when sending mail. You would need to hack a core module to add this option.

  Read the article

• Renaming VLAN Interfaces in Linux

  - by rhololkeolke

  I need to know how to rename VLAN interfaces. I'm currently running Ubuntu 11.04. I'm running a networking application that takes frames on one interface applies things like delays and errors and then forwards the frames out another interface. The default naming convention which names things <interface>.<vlan> e.g. eth0.2 will not work for my purposes because the program which parses the configuration script for the networking application doesn't like the decimal in the interface name. I ran vconfig set_name_type VLAN_PLUS_VID which solves the decimal in the interface name problem, however, I can then no longer assign the same vlan id to multiple interfaces because they have the same name. I know how to change physical interface names using udev rules, but because the vlan's will have the same MAC address and they aren't physical interfaces I can't use those rules to rename the interfaces. Is there a way to rename any interface in linux, including the virtual ones? Is there a way to specify your own naming convention for config set_name_type option without having to recompile the source of vconfig?

  Read the article

• Server down at 23:26 every night

  - by miccet

  We are having a big problem with our sites stability the last couple of weeks and after endless hours of troubleshooting I don't get anywhere. So I turn to you dear community. Setup: 2 x VPS servers - Front end, 8 core, 8G RAM. - Database, 5 core, 3G RAM. Both running Ubuntu. Ruby on Rails EE with Passenger 3 and Rails 2.3.11. MySQL 5.1.67. The problem is that each night, at the exact same time (23:26) the SQL server suddenly shows a processlist full of COMMIT with an increasing Time. After 30-40 seconds (can go longer) a wave seems processed and the site responds for a few seconds before it repeats. During this hick up the database server load spikes while the front end is relaxing. I have looked at slow queries, but is not finding any locks or other unusual queries ran at this time. I have looked at iotop at the time of the halt and there is no activity from mysql. I also tried turning off query_cache and messed around with the mysql configuration file without much change. Any ideas?

  Read the article

• Configuring two subnets with two NICS. Access from a NAS to the internet

  - by archipestre

  I am having trouble configuring my NAS. I have a DSL router with WIFI (192.168.1.1) in my flatmates room. In my room I have a server with two NICS: 1) wlan0 (192.168.1.2) that connects to the DSL router via wireless 2) em1 (192.168.0.1) that connects to the NAS (192.168.0.20) with a crossover cable. I have Fedora 17 and I have enable packet forwarding. My IP configuration is as follows: WLAN0 inet 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255 EM1 inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 My routing table looks like: Destination Gateway G enmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 em1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 I have enable a static route in the DSL server: Status Network Destination Subnet Mask Interface Gateway Remove Edit Active 192.168.0.0 255.255.255.0 LAN 192.168.1.2 From my server I can ping the DSL router and the NAS. From the NAS I can ping both NICS of the server. However the NAS is unable to ping the DSL router or any address in the Internet. Any idea of what is wrong. Thank you in advance

  Read the article

• Merging two separate DNS zones

  - by cube

  This is a hypothetical question. Let's suppose I have two networks, each with its own DNS server. Network A has names a1.local, a2.local, ... and network B has b1.local, b2.local, .... Zone file for each of the networks looks something like this: $ORIGIN local @ IN SOA .... blah blah blah a1 A 1.2.3.4 a2 A 2.3.4.5 ... for A, and $ORIGIN local @ IN SOA .... blah blah blah b1 A 3.4.5.6 b2 A 4.5.6.7 ... for B. Now I also have a regular internet domain example.com and I want to access the machines as a1.A.example.com, b1.B.example.com, ... How will I have to change the configuration of name servers in networks A and B? (in fact I am writing a super-magic DNS server, currently serving A and B separately, but there is a chance that I will have to add the ability to merge the networks; so I'm interested in knowing the problems which lie ahead of me and how to prepare for the possibility)

  Read the article

• Apache directory access with virtual host [SOLVED]

  - by alexeygaidamaka

  I have a virtual host with a configuration like that. When i'm trying to get into foobar.com/dir providing valid username/password pair i get 403 forbidden page instead of that directory contents. www.foobar.com/dir has 777 rights, .httpaswd is chmoded 644. But i can't figure out why i am still not seeing contents. Please, give me a hint. ServerAdmin webmaster@localhost ServerName www.foobar.com ServerAlias www.foobar.com DocumentRoot /var/www/foobar <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/foobar> Options -Indexes FollowSymLinks AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> <Directory /var/www/foobar/dir> AllowOverride AuthConfig AuthName "Authorize yourself, please!" AuthType Basic AuthUserFile /etc/apache2/.htpasswd AuthGroupFile /dev/null Allow from All Order Allow,Deny Options +Indexes<<- that one should be added Require valid-user you have to add the line Options +Indexes to see directory contents

  Read the article

• Win7 taskbar freezes on startup for about 1-2 mins

  - by Mike

  Running Win7 64-bit for about 4 months now. Never had this problem, didn't install anything new recently. When I boot up I can't do anything in the taskbar, it's frozen for about 1-2 minutes then everything is normal. I can right click on my desktop and move my mouse around. This randomly just started happening a couple days ago after a reboot. I have a 3.2ghz quad, SSD, 4 gig ram, etc. and it usually starts up quickly. After some troubleshooting (including running antivirus and Anti-Malware), it doesn't appear to be software related, but appears to be services related. I can boot up in safe mode and safe mode with networking just fine. I can also boot up normally with all my regular software loading at startup, BUT with all my services turned off. Now the odd part. When I run msconfig to disable all the services at startup and go through ticking them on 5-10 at a time or so and booting up it seems to be somewhat random. Ticking everything on from "Application Experience" halfway down to about "Quality Windows Audio Video Experience" and I can boot without the 1-2 min. freeze. Then I start ticking the stuff below that from a couple of Remote Accesses to Smart Card and Task Scheduler, etc. But the weird part is sometimes it will freeze sometimes it won't. I can't narrow it down. Then if it freezes, I'll boot up in safe mode and turn the ones I just turned on back off and I'll reboot normally but it will freeze again. Which makes no sense because that configuration just worked without freezing just before. I got frustrated enough that I backed up and wiped my hard drive (formatted and everything) and reinstalled Win7 but when I booted up, the freeze happened again. Any ideas? Thanks in advance.

  Read the article

• How to turn a DSL wireless modem to a wifi hub

  - by my_question

  I used to use DSL for my home internet and used Qwest Q1000 wireless modem. Now I switched to cable and use wireless router to cover the home. One problem is I just bought a desktop and I like to put it in a place far away from the router. The desktop only has cable interface, it does not receive wifi. The obvious solution is I go buy that little USB dongle which can receive wifi and plug it to the desktop. But before doig that, I am wondering if somehow I can re-use the Q1000 modem. The modem has 4 LAN ports and it has wifi antenna. I tried connecting the desktop to Q1000's LAN port, the system shows wire connection is in place, but I cannot access internet. It seems to me Q1000's wifi function is to broadcast the wifi signal out instead of receiving signal. I went to the Q1000 configuration page by going to web page of "192.168.0.1", it is not clear how to set it up. I also wonder one thing, my home wifi is encrypted, so if I want to let Q1000 to join the wifi, I need to somehow type in the password, I am not sure how to do that either. Anyway, maybe this thing cannot be used in this fashion. If you have any suggestion, please shed some light. Thanks.

  Read the article

< Previous Page | 984 985 986 987 988 989 990 991 992 993 994 995  | Next Page >