Search Results

Search found 3707 results on 149 pages for 'secure'.

Page 99/149 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

  • The Evolution of Computer Keyboards

    - by Jason Fitzpatrick
    While the basic shape of keyboards has remained largely unchanged over the last thirty years, the guts have undergone several transformations. Read on to explore the history of the computer keyboard. ComputerWorld delves into the history of the modern keyboard, including the heavy influence IBM’s extensive keyboard research on early keyboards: As far as direct influences on the modern computer keyboard, IBM’s Selectric typewriter was one of the biggest. IBM released the first model of its iconic electromechanical typewriter in 1961, a time when being able to type fast and accurately was a highly sought-after skill. Dag Spicer, senior curator at the Computer History Museum, notes that as the Selectric models rose to prominence, admins grew to love the feel of the keyboard because of IBM’s dogged focus on making the ergonomics comfortable. “IBM’s probably done more than anyone to find [keyboard] ergonomics that work for everyone,” Spicer says. So when the PC hit the scene a decade or two later, the Selectric was largely viewed as the baseline to design keyboards for those newfangled computers you could put in your office or home. Hit up the link below to continue reading about how the Selectric influenced keyboards throughout the 1980s and what replaced the crisp clacking of early IBM-styled models. 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

    Read the article

  • Old Lock Retrofitted for Wireless and Key-free Entry

    - by Jason Fitzpatrick
    What do you do if the old key your landlord gave you is poor fit for your apartment’s lock? If you’re the geeky sort, you build a wireless unlocking module to do the work for you. Instructables user Rybitski writes: The key to my apartment never worked quite right because it is a copy of a copy of a copy. I am fairly certain that the dead bolt is original to the building and the property manager seems to have lost the original key years ago. As a result unlocking the door was always a pain. Changing the lock wasn’t an option, but eliminating the need to use a key was. To that end, he built the device seen in the video above. An Arduino Uno drives a servo which in turn opens the deadbolt. The whole thing is controlled by a simple wireless key fob. Hit up the link below for the full build guide including code. Key Fob Deadbolt [via Hack A Day] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

    Read the article

  • How to Set Up a Hadoop Cluster Using Oracle Solaris (Hands-On Lab)

    - by Orgad Kimchi
    Oracle Technology Network (OTN) published the "How to Set Up a Hadoop Cluster Using Oracle Solaris" OOW 2013 Hands-On Lab. This hands-on lab presents exercises that demonstrate how to set up an Apache Hadoop cluster using Oracle Solaris 11 technologies such as Oracle Solaris Zones, ZFS, and network virtualization. Key topics include the Hadoop Distributed File System (HDFS) and the Hadoop MapReduce programming model. We will also cover the Hadoop installation process and the cluster building blocks: NameNode, a secondary NameNode, and DataNodes. In addition, you will see how you can combine the Oracle Solaris 11 technologies for better scalability and data security, and you will learn how to load data into the Hadoop cluster and run a MapReduce job. Summary of Lab Exercises This hands-on lab consists of 13 exercises covering various Oracle Solaris and Apache Hadoop technologies:     Install Hadoop.     Edit the Hadoop configuration files.     Configure the Network Time Protocol.     Create the virtual network interfaces (VNICs).     Create the NameNode and the secondary NameNode zones.     Set up the DataNode zones.     Configure the NameNode.     Set up SSH.     Format HDFS from the NameNode.     Start the Hadoop cluster.     Run a MapReduce job.     Secure data at rest using ZFS encryption.     Use Oracle Solaris DTrace for performance monitoring.  Read it now

    Read the article

  • Sponsored Giveaway: Free Copies of WinX DVD Copy Pro for All How-To Geek Readers

    - by The Geek
    Have you ever wanted to make a backup of a DVD, or even rip it to an ISO file to use on your computer without the original optical disc? You can use WinX DVD Copy Pro to make this happen, and we’ve got a giveaway for all HTG readers. To get your free copy, just click through the following link to download and get the license code, as long as you download it by December 20th. In addition, an iPhone / iPad Video Software Pack will be presented as the second round gift from December 21st to January 2nd, 2013. For Windows users: http://www.winxdvd.com/giveaway/ WinX DVD Copy Pro has many features, including this list, which we copied straight from their site: Supports latest released DVDs. Protect your DVD disc from damage. Copy DVD to DVD, ISO image, etc. 9 advanced DVD backup schemes. Support Disney’s Fake, scratched DVDs and Sony ARccOS bad sector. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • Install Ubuntu in UEFI mode (unable to boot from USB)

    - by Adele
    I recently bought a Dell Inspiron 15R SE with Windows 8 (64 bit) pre-installed (UEFI supported). I want to install Ubuntu in dual boot with Windows 8. I tried to follow all instruction here : https://help.ubuntu.com/community/UEFI And here : Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) So, I set Secure Boot to "off" into BIOS and I disable Fast Startup as described here : http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html I created a bootable USB key for Ubuntu (Ubuntu 13.10 64bits international Edition) with Unetbootin. The problem is I am unable to boot from the USB key. The computer tries to boot into infinite loop. I also tried to boot from USB with "Legacy Boot" option instead of UEFI. In this case, the computer says there are no bootable devices. Of course, I tried to boot from my USB key on an other computer having normal BIOS and it works perfectly. Have you ideas about what I need to do to be able to boot from USB ? Thanks in advance for your help, Adele

    Read the article

  • Password protect an alias virtual directory

    - by Jason
    I have a main domain being hosted through CPanel. I also have a sub-domain that I would like to appear as a path under the main domain instead of as a sub-domain. So I have: http://example.com/ pointing to the main hosted file. http://example.com/mydir pointing to the subdomain files. This is achieved by a httpd.conf include from the main domain section to set an alias: alias /mydir /path/to/subdomain/files/ Now, that works fine so far. The problem is that if a .htaccess file under /path/to/the/subdomain/files/ contains an error, the alias is completely skipped, and /mydir goes instead to the main host files. That is kind of surprising to me - I would expect an error to return an error instead. Now the killer: if I try to password protect /path/to/subdomain/files/, then trying to access http://example.com/mydir will again attempt to deliver from under the main hosted files and not from /path/to/subdomain/files/ I am not seeing any errors reported on the .htaccess file in the apache error log, so I am assuming the .htaccess is valid: AuthUserFile /path/to/valid/readable/.htpasswd AuthName "Secure Access" AuthType Basic Require valid-user This kind of behaviour does not seem right to me. Is there something obvious that could be causing it? Or is this just the way it works? Perhaps using an alias is the wrong way to go?

    Read the article

  • Is file permission secured when it transferred from Ubuntu to Windows?

    - by Gaurav_Java
    I am having 9GB text file which is encrypted . This file contains some confidential data . Which is on my system(Ubuntu) and my external HDD (ntfs) . This file get daily updated and then encrypted . But it has to be shared among 2-3 (Windows) person. I defined permission so that no other person can even read this file(chmod 660). It is too large file, so I can't upload it anywhere and it get updated daily basis. But this file travel on Windows OS and Ubuntu also. Even I am having copy of this on my personal computer. Recently it was deleted by some other user over Windows . I just want to know how can I set permission over that file so that it cannot be deleted from any other operating system. If someone delete this file, then I am having data old for couple of days, which is only on my system. I gone through this question it says there is nothing. And from this question I am not able to understand how can I protect it. Can I do anything for preventing this file from being deleted. Then how can I secure this files from getting deleted any suggestion or software or ideas. Maybe I sound silly or this is stupid question. Please don't close it, thanks for any suggestion or solution.

    Read the article

  • Have Windows Automatically Login Without Entering Your Password

    - by deadlydog
    If you are like me and don't want to have to enter your password each time Windows loads, you can have Windows start up without prompting you to enter a user name or password.  The simple (and BAD) way to do this is to simply not have a password on your user account, but that’s a big security risk and will allow people to easily remote desktop into your computer. So, first set a password on your windows account if you don’t already have one.  Then select Run... from the start menu (or use Windows Key + R to open the Run window) and type control userpasswords2, which will open the user accounts application.   On the Users tab, clear the box for Users must enter a user name and password to use this computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use to automatically log into Windows.  That's it.    You may also want to make sure your screen saver is not set to prompt you for a password when it exits either. Now your computer is secure without getting in your way.

    Read the article

  • How to have Windows 7 remember a password for a Domain

    - by Kelly Jones
    About eighteen months ago, I wrote a post covering how to clear saved passwords in Windows XP.  This week at work I was reminded how useful it is to not only deleted saved passwords, but to also setup wildcard credentials using this same interface. The scenario that I run into as consultant working at a client site, is that my laptop is not a member of the Windows Domain that my client uses to secure their network. So, when I need to access file shares, shared printers, or even the clients internal websites, I’m prompted for a name and password.  By creating a wildcard entry on my laptop (for the user account that the client issued to me), I avoid this prompt and can seamlessly access these resources.  (This also works when you’ve configured Outlook to access Exchange via RPC over HTTP.) How to create a credential wild card entry in Windows 7: Go to your Start Menu --> Type "user" into the Search box Click on the “Manage your credentials” in the column on the left Click on the “Add a Windows credential” link Enter the Domain (in my case my client’s domain), something like this: *.contoso.com Enter the username and password That’s it.  You should now be able to access resources in that Domain without being prompted for your name and password.  Please note: if you are required to change your password periodically for that domain, you’ll need to update your saved password as well.

    Read the article

  • What type of pattern would be used in this case

    - by Admiral Kunkka
    I want to know how to tackle this type of scenario. We are building a person's background, from scratch, and I want to know, conceptually, how to proceed with a secure object pattern in both design and execution... I've been reading on Factory patterns, Model-View-Controller types, Dependency injection, Singleton approaches... and I can't seem to grasp or 'fit' these types of designs decisions into what I'm trying to do.. First and foremost, I started with having a big jack-of-all-trades class, then I read some more, and some tips were to make sure your classes only have a single purpose.. which makes sense and I started breaking down certain things into other classes. Okay, cool. Now I'm looking at dependency injection and kind of didn't really know what's going on. Example/insight of what kind of heirarchy I need to accomplish... class Person needs to access and build from a multitude of different classes. class Culture needs to access a sub-class for culture benefits class Social needs to access class Culture, and other sub-classes class Birth needs to access Social, Culture, and other sub-classes class Childhood/Adolescence/Adulthood need to access everything. Also, depending on different rolls, this class heirarchy needs to create multiple people as well, such as Family, and their backgrounds using some, if not all, of these same classes. Think of it as a people generator, all random, with backgrounds and things that happen to them. Ageing, death of loved ones, military careers, e.t.c. Most of the generation is done randomly, making calls to a mt_rand function to pick from most of the selections inside the classes, guaranteeing the data to be absolutely random. I have most of the bulk-data down, and was looking for some insight from fellow programmers, what do you think?

    Read the article

  • SPARC SuperCluster: new Software Enhancements announced on December 4

    - by Giuseppe Facchetti
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} December 4, 2012: Oracle Unveils Cloud and Consolidation Capabilities for Oracle SPARC SuperCluster The latest SPARC SuperCluster update offers layered, zero-overhead virtualization for Mission-Critical applications. Oracle today announced new software enhancements to the Oracle SPARC SuperCluster engineered system which enable customers to consolidate any combination of mission-critical enterprise databases, middleware and applications on a single system and rapidly deploy secure, self-service cloud services. For all the details, click here.

    Read the article

  • What technical details should a programmer of a web application consider before making the site public?

    - by Joel Coehoorn
    What things should a programmer implementing the technical details of a web application consider before making the site public? If Jeff Atwood can forget about HttpOnly cookies, sitemaps, and cross-site request forgeries all in the same site, what important thing could I be forgetting as well? I'm thinking about this from a web developer's perspective, such that someone else is creating the actual design and content for the site. So while usability and content may be more important than the platform, you the programmer have little say in that. What you do need to worry about is that your implementation of the platform is stable, performs well, is secure, and meets any other business goals (like not cost too much, take too long to build, and rank as well with Google as the content supports). Think of this from the perspective of a developer who's done some work for intranet-type applications in a fairly trusted environment, and is about to have his first shot and putting out a potentially popular site for the entire big bad world wide web. Also, I'm looking for something more specific than just a vague "web standards" response. I mean, HTML, JavaScript, and CSS over HTTP are pretty much a given, especially when I've already specified that you're a professional web developer. So going beyond that, Which standards? In what circumstances, and why? Provide a link to the standard's specification.

    Read the article

  • How to integrate a PHP CMS with paypal so that only users who completed a payment can register and authenticate?

    - by ibiza
    I am currently using a PHP CMS - cmsmadesimple - in order to create a website where services will be sold. I intend to use Paypal 'Buy Now' buttons in order to offer a few packages that will be renewable every 1-month or every 3-months and that grant access to the secure content of the website for a given period of time. Everything is going well so far but I am somewhat at loss for the user registration process as I have a few constraints I would like to use and it would be nice to automate the process if possible. Here are the constraints : User should be able to register to my website and choose a password himself Only users that paid should be able to register Access permissions should be disabled automatically after the service period if the package is not renewed And here is the process which I am thinking of : User clicks 'buy' on my website User is redirected on Paypal and completes the payment The paypal email used to pay should be returned to my server and somehow stored If it is a new email, user needs to register to my website (else if it is a returning customer, the deactivation flag for payment stopped should be removed to give back access) If a user does not renew his subscription, there should be a deactivation flag automatically set to the email used in order to lock access until next payment. Ideally, no human intervention is needed. What is the best way to implement all this? I am a bit at loss. I found this article that explained a few things and even has a nice code snippet, except that I'm not sure where to plug it. Thanks all

    Read the article

  • kismet on BCM43227

    - by Uttam Baroi
    I am trying to monitor wireless on Broadcom BCM43227, I used sudo airmon-ng to run the monitoring, i get command not found. I installed kismet, when i run, i get this *uttam@UT:~$ sudo kismet Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping. Enabling channel splitting. NOTICE: Disabling channel hopping, no enabled sources are able to change channel. Source 0 (addme): Opening none source interface none... FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line. Please read the README for more information about configuring Kismet. Kismet exiting. Done. uttam@UT:~$* I did check a blog about kismet on Broadcom that says about some binary drivers not allowing to do it... I used iwconfig and it says no extension : what is that well I need to give a hand on air monitoring............ help, how to do it

    Read the article

  • HTG Explains: How Internet Explorer Saves Your Passwords and How to Manage Them

    - by Taylor Gibb
    Privacy is very important when it comes to the digital world, but do you know exactly how your browser saves your passwords ? Read on to find out what goes on behind the scenes. When it comes to web applications, there are many different types of authentication. One of the types is called basic authentication, which is when you navigate to website and a dialog box opens to ask for a username and password. This also happens to be the authentication mechanism defined in the RFC for HTTP. You can see in the screen shot above that there is a check box that you can use to remember your credentials, but what does that do ? You might also ask yourself what happens if you are not using Basic authentication. There is another type of authentication called Form authentication, this is when the authentication is built right into the web application, like the How-To Geek website. This allows the Developer to control the look and feel of the form that we use to log in. How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

    Read the article

  • What is the recommended way to empty a SSD?

    - by Lekensteyn
    I've just received my new SSD since the old one died. This Intel 320 SSD supports TRIM. For testing purposes, my dealer put malware, err, Windows on it. I want to get rid of it and install Kubuntu on it. It does not have to be a "secure wipe", I just need the empty the disk in the mosy healthy way. I believe that dd if=/dev/zero of=/dev/sda just fills the blocks with zeroes and thereby taking another write (correct me if I'm wrong). I've seen the answer How to enable TRIM, but it looks like it's suited for clearing empty blocks, not wiping the disk. hdparm seems to be the program to do it, but I'm not sure if it clears the disk OR cleans empty blocks. From its manual page: --trim-sector-ranges For Solid State Drives (SSDs). EXCEPTIONALLY DANGEROUS. DO NOT USE THIS OPTION!! Tells the drive firmware to discard unneeded data sectors, destroying any data that may have been present within them. This makes those sectors available for immediate use by the firmware's garbage collection mechanism, to improve scheduling for wear-leveling of the flash media. This option expects one or more sector range pairs immediately after the option: an LBA starting address, a colon, and a sector count, with no intervening spaces. EXCEPTIONALLY DANGEROUS. DO NOT USE THIS OPTION!! E.g. hdparm --trim-sector-ranges 1000:4 7894:16 /dev/sdz How can I make all blocks appear as empty using TRIM?

    Read the article

  • Impact Earth Lets You Simulate Asteroid Impacts

    - by Jason Fitzpatrick
    If you’re looking for a little morbid simulation to cap off your Friday afternoon, this interactive asteroid impact simulator makes it easy to the results of asteroid impacts big and small. The simulator is the result of a collaboration between Purdue University and the Imperial College of London. You can adjust the size, density, impact angle, and impact velocity of the asteroid as well as change the target from water to land. The only feature missing is the ability to select a specific location as the point of impact (if you want to know what a direct strike to Paris would yield, for example, you’ll have to do your own layering). Once you plug all that information in, you’re treated to a little 3D animation as the simulator crunches the numbers. After it finishes you’ll see a breakdown of a variety of effects including the size of the crater, the energy of the impact, seismic effects, and more. Hit up the link below to take it for a spin. Impact Earth [via Boing Boing] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

    Read the article

  • Partner Webcast – Oracle Weblogic 12c for New Projects - 07 Nov 2013

    - by Thanos Terentes Printzios
    Fast-growing organizations need to stay agile in the face of changing customer, business or market requirements. Oracle WebLogic Server 12c is the industry's best application server platform that allows you to quickly develop and deploy reliable, secure, scalable and manageable enterprise Java EE applications.WebLogic Server Java EE applications are based on standardized, modular components. WebLogic Server provides a complete set of services for those modules and handles many details of application behavior automatically, without requiring programming. New project applications are created by Java programmers, Web designers, and application assemblers. Programmers and designers create modules that implement the business and presentation logic for the application. Application assemblers assemble the modules into applications that are ready to deploy on WebLogic Server. Build and run high-performance enterprise applications and services with Oracle WebLogic Server 12c, available in three editions to meet the needs of traditional and cloud IT environments. Join us, in this webcast, as we will show you how WebLogic Server 12c helps you building and deployingenterprise Java EE applications with support for new features for lowering cost of operations, improving performance, enhancing scalability. Agenda Oracle WebLogic Server Introduction Application Development on WebLogic Using Java EE Overview of the Application Deployment Process Monitoring Application Performance Q&A November 07th, 2013 -  9am UTC/11am EET Delivery FormatThis FREE online LIVE eSeminar will be delivered over the Web. Registrations received less than 24hours prior to start time may not receive confirmation to attend. Duration: 1 hour REGISTER NOW For any questions please contact us at partner.imc-AT-beehiveonline.oracle-DOT-com Stay Connected Oracle Newsletters

    Read the article

  • Windows 8.1 - unfixable grub

    - by Nick
    I have a Gigabyte laptop that came with secure boot and windows 8. After a bit of battling, I managed to get my dual boot with Ubuntu 13.10.. Anyway, I upgraded zindows to 8.1, now grub is gone. I restarted from a live CD and chrooted to my drive. I used boot-repair multiple times (with successful output) both in default and with some advanced options; also reinstalled grub manually... Each time it tries once to boot to grub but gives a message for a very short amount of time. I recorded it and it is a regular bios message "Rebbot and Select proper Boot device of Insert Boot media in selected boot device and press a key" I even tried something called EasyBCD under winblows, it shows the correct boot options, but same there, it is unable to make the linux partition fire up. Anyway, no way to boot my linux box. Does anyone have an idea how to fix this? No need to redirect me to another post with grub reinstall or boot-repair, seen them all... I am thinking of trying this other boot loader, refind, to see if it works http://www.rodsbooks.com/refind/index.html Also re-reading this bios message, I'm thinking my partition might not have a boot flag anymore... I'll try that too with parted. Although both grub and win 8 are supposed to fire up from the same boot partition (the EFI one) Please help! thx

    Read the article

  • Dedicated server: managed hosting or manage it myself?

    - by ddawber
    We're currently hosting a number of sites on a self-managed dedicated server. Some companies, however, offer a managed dedicated server hosting service. They offer: Roughly the same server spec Ticketing system support Managed daily backups Virtual firewall (but with a limit of 10 IP addresses allowed through at any one time) Now, this managed hosting is at extra expense - somewhere in the region of $500 per month, and the limit on the number of IP addresses they'll manage on the firewall is also a real pain. My thinking is it would be better and cheaper to Stay with the same host since the dedicated box is fine Get an Amazon AWS account and use their server to manage backups; there are a number of good tools that can be used to automate the process Configure iptables so that I have complete control of the firewall I want to know Is a managed virtual firewall likely to be more secure than me configuring iptables? Whether, in your opinion, it's best to let someone else take care of backups? If, from your experience, there's anything else i'm missing that warrants using managed hosting over a DIY service? I think there is some reluctance to not having managed hosting since a managed host in effect takes responsibility for your server, whereas any hardware or security issues with a server that we manage would mean we are forced to hold our hands up when a client site goes down. That said, I personally don't think a managed host does that much in the day to day running of your server (backups are automatic, OS updates are carried out with ease, etc.).

    Read the article

  • Dedicated server: managed hosting or manage it myself?

    - by ddawber
    We're currently hosting a number of sites on a self-managed dedicated server. Some companies, however, offer a managed dedicated server hosting service. They offer: Roughly the same server spec Ticketing system support Managed daily backups Virtual firewall (but with a limit of 10 IP addresses allowed through at any one time) Now, this managed hosting is at extra expense - somewhere in the region of $500 per month, and the limit on the number of IP addresses they'll manage on the firewall is also a real pain. My thinking is it would be better and cheaper to Stay with the same host since the dedicated box is fine Get an Amazon AWS account and use their server to manage backups; there are a number of good tools that can be used to automate the process Configure iptables so that I have complete control of the firewall I want to know Is a managed virtual firewall likely to be more secure than me configuring iptables? Whether, in your opinion, it's best to let someone else take care of backups? If, from your experience, there's anything else i'm missing that warrants using managed hosting over a DIY service? I think there is some reluctance to not having managed hosting since a managed host in effect takes responsibility for your server, whereas any hardware or security issues with a server that we manage would mean we are forced to hold our hands up when a client site goes down. That said, I personally don't think a managed host does that much in the day to day running of your server (backups are automatic, OS updates are carried out with ease, etc.).

    Read the article

  • How to do a 3-tier using PHP [closed]

    - by Ric
    I have a requirement from a client for my PHP Web application to be 3-tier. For example, I would have a web server on Apache in the DMZ, but it should NOT contain any DB connections. It should connect to a Middle server that would host the business objects but be behind the firewall. Then those objects connect to my SQL cluster on another server. I have actually done this using .NET, but I am not sure how to setup my stack using PHP. I suppose I could have my UI front tier call the middle tier using REST based web services if I create my middle tier as a second web server, but this seems overly complex. The main reason for this is advanced security: we can not have any passwords on the DMZ first tier web server. The second reason is scalability - to have multiple server on different tiers that can handle the requests. The Last reason is for deployment - it is easier if I can take one set of servers offline for testing before putting them back in production. Is there a open source project that shows how to do this? The only example I can find is the web server hosting files from a shared drive on another machine (kind of how DotNetNuke pretends to be 3-tier), but that is NOT secure.

    Read the article

  • How do I dissuade users from using the same password with similar systems?

    - by Resorath
    I'm building a web application that connects to other web services (using strictly anonymous binding, so no user passwords are being used). However the web application maintains its own users itself, and is required to ask certain details such as e-mail addresses and public linking information to these other web services (for example, a username but not a password). I want to deter or prevent users from reusing passwords in my application that they have also used in the applications I'm linking to. For example, if I ask for their e-mail and provide me with their gmail address, I don't want them using their gmail password for my system. Another example would be reusing a password to a linked system in which they also gave me their username. One idea I had was to simply try using the information they gave me, along with the password they are trying to store and log in to these external web applications to test the password - then immediately unbind if I was successful and ask the user to use a different password. However I suspect there is a host of morale and legal issues there. The reason this is a big deal to me is accountability. My application is simply not funded enough to invest properly in security around user passwords. A salted, hashed password in a public SQL-like database is as secure as it gets. So if passwords and linked usernames or e-mails get out, I don't want my userbase compromised.

    Read the article

  • Trade In, Trade Up Promotion: SPARC Consolidation Now Through May 31st

    - by swalker
    Dear Partner, Installed Base Business (IBB) technology refresh is one of the most important activities for Oracle, for you and for your customers. It allows your existing customers to benefit from the most up-to-date, best-of-breed Oracle products. And it’s an exciting time to perform a technology refresh: a new SPARC promotion is available now, closing 31st May 2012. Customers trading in older SPARC systems and upgrading to a new SPARC SuperCluster T4-4 or SPARC Enterprise M8000/M9000 can get $4,000 per CPU. Discount is pre-approved and upfront (maximum discounts apply). The major highlights are as follows: Targeted Systems: Upgrade to SPARC M8000, M9000, SuperCluster Qualified installed base upgrade from: All older-generations of SPARC systemsPromotional offer: Trade-in Value: $4K per CPU Pre-approved maximum discount (including trade-in) not to exceed 60% on M8/9000 systems and 25% on SuperCluster No-cost dock-to-dock shipping, and environmentally safe disposal of the returned hardware through Oracle best-of-class recycling processes. Recommendations: We recommend you to take the following actions: As usual, please register your opportunities in OMM When you do so, please make sure you place the following Campaign Names in the “Marketing Initiative” field of OMM: Campaign Name : EMEA_Tech Refresh-IBB Campaign_12H1_Follow Up_O For all the details: Please view rules, and FAQs. For more information, please visit the Promo Partner Site here. For more information on IBB and the Oracle Upgrade Advantage Program (UAP):http://www.oracle.com/us/products/servers-storage/upgrade-advantage-program/index.html http://www.oracle.com/partners/secure/sales/oracle-ibb-program-for-partners-184291.html Contacts: For questions, please contact your favorite Oracle Partner Account Manager.

    Read the article

  • Dualboot (Win 8 / Ubuntu 13) is stuck at 'switching to clocksource'

    - by Daniel Puscht
    for days I have been crawling the web for solutions to my problem, but couln't find any. Here it is: I got a new Laptop (ASUS Vivobook S200E) with Win 8 OEM preinstalled. I wanted to create a dual-boot system with Ubuntu 13 next to it. I read about UEFI and that I have to turn of Secure Boot and use the existing EFI partition as bootloader for Ubuntu. So I did. I also ran boot-repair reinstalling the GRUB. The result is when I start the computer I get into the boot menu. So far, so good. When I pick Win everthing is fine. But when I choose Ubuntu (recovery) the system starts, but gets stuck at the line '[1.806366] Switching to clocksource tsc'. I already tried other versions of Ubuntu (12.04.2, 12.10). I played with boot-repair (using the recommended fix, setting everything manually). But nothing works. It's always the same issue. I read that it could be a problem concerning graphic drivers, but this I can hardly believe. If this is any help, boot-repair gave me this link to post in fora. http://paste.ubuntu.com/5810391/ Thanks for any help in advance

    Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >