Search Results

Search found 258 results on 11 pages for 'sensors'.

Page 1/11 | 1 2 3 4 5 6 7 8 9 10 11  | Next Page >

  • Cant get lm-sensors to load ATI Radeon temp and fan or output all settings

    - by woody
    New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get the ATI Radeon sensors working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

    Read the article

  • Cant get lm-sensors to load ATI Radeon temp or fan

    - by woody
    New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get it working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

    Read the article

  • Reading cpu temperature Intel Celeron (R) with lm-sensors

    - by tim_a
    I know there are already a lot of questions like this, but non of the answers provided there could fix my problem. I try to read out my cpu temperature with lm-sensors on my ubuntu 10.04 LTS installation but I can't get to work. I did try the command sensors-detect several times but still nothing. My computer is an old PC with an Intel Celeron (R) @ 2.60 GHz. The odd thing is that the hdd temp is shown in the applet but when I type in the terminal sensors I get the error: "No sensors found! Make sure you loaded all the kernel drivers you need." I'm not really interested in the hdd temperature but I think it is strange that these sensors do work in the applet and not in the terminal. This is the output that sensors-detect gives: http://pastebin.com/F4hVKaLU Any suggestions?

    Read the article

  • lm-sensors - always returns 32 degrees (celsius) for temperature

    - by mopoke
    On my VIA EPIA motherboard (using VIA VT8231 ISA bridge), I get strange output for the lm-sensors temperature reading. It always returns 32 degrees (celsius). I have previously had correct output for temperature (my munin graphs show temperatures typically in the range of 50 to 60 degrees. I've tried uninstalling (and purging) the lm-sensors package, have re-run sensors-detect a number of times and rebooted but nothing seems to change the output. I am running Ubuntu Karmic Koala (9.10). Anyone got any bright ideas on what I might have missed? uname -a: Linux george 2.6.31-16-386 #53-Ubuntu SMP Tue Dec 8 06:39:34 UTC 2009 i686 GNU/Linux cpuinfo: processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 399.000 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow up bogomips : 800.04 clflush size : 32 power management: lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +32.0°C (crit = +60.0°C)

    Read the article

  • How do I install sensors-applet?

    - by honestann
    I want to install sensors-applet onto my Ubuntu 12.04 computer. The instructions on this (and other) webpages says to enter this command in a command terminal: sudo apt-get install sensors-applet This is a gnome applet and gnome isn't exactly obscure. Why can sensors-applet package not be found? Before you say "no", note that I was able to execute "gnome-panel" to add a bar/panel along the bottom of my desktop, add 8 cpu-frequency applets to the bar (one per CPU core), and add gnome-panel to my startup applications. So I've already done the basics, and believe all I need now is to be able to download and install the sensors-applet to have that temperature applet available on the panel too. See here.

    Read the article

  • sensors reporting weird temperatures

    - by Felix
    lm-sensors is reporting weird temps for me: $ sensors coretemp-isa-0000 Adapter: ISA adapter Core 0: +38.0°C (high = +72.0°C, crit = +100.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +35.0°C (high = +72.0°C, crit = +100.0°C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +32.0°C (high = +72.0°C, crit = +100.0°C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +42.0°C (high = +72.0°C, crit = +100.0°C) w83627dhg-isa-0290 Adapter: ISA adapter Vcore: +1.10 V (min = +0.00 V, max = +1.74 V) in1: +1.62 V (min = +0.06 V, max = +0.17 V) ALARM AVCC: +3.34 V (min = +2.98 V, max = +3.63 V) VCC: +3.34 V (min = +2.98 V, max = +3.63 V) in4: +1.83 V (min = +1.30 V, max = +1.15 V) ALARM in5: +1.26 V (min = +0.83 V, max = +1.03 V) ALARM in6: +0.11 V (min = +1.22 V, max = +0.56 V) ALARM 3VSB: +3.30 V (min = +2.98 V, max = +3.63 V) Vbat: +3.18 V (min = +2.70 V, max = +3.30 V) fan1: 0 RPM (min = 0 RPM, div = 128) ALARM fan2: 1117 RPM (min = 860 RPM, div = 8) fan3: 0 RPM (min = 10546 RPM, div = 128) ALARM fan4: 0 RPM (min = 10546 RPM, div = 128) ALARM fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM temp1: +88.0°C (high = +20.0°C, hyst = +4.0°C) ALARM sensor = diode temp2: +25.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode temp3: +121.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor cpu0_vid: +2.050 V Please note temp3. How can I know what temp3 is, and why it is so high? The system is really stable (which I guess it wouldn't be at those temps). Also, note the really decent core temps, which suggest a healthy system as well. My guess is that the readout is wrong. On another computer it reported temperatures below 0 degrees centigrade, which was not possible, considering the environment temperature of ~22-24. Is this some known bug/issue? Should I try some Windows programs (like CPU-Z) and see they give similar results?

    Read the article

  • LM Sensors always returning same (invalid) value for one temp sensor

    - by pkaeding
    I am trying to monitor the temp sensors on a server, and plot them using Cacti. I have lm-sensors installed and working correctly. For example, here is the output from sensors: % sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8 C (crit = +100.0 C) temp2: +32.0 C (crit = +60.0 C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +36.0 C (high = +105.0 C, crit = +105.0 C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +42.0 C (high = +105.0 C, crit = +105.0 C) However, when I try to get this data via SNMP, I get only one sensor's temperature correctly, and another one always returns 100.000 C: % snmpwalk -Os -c public -v 1 10.8.0.18 -m ALL lmTempSensors lmTempSensorsIndex.1 = INTEGER: 0 lmTempSensorsIndex.2 = INTEGER: 1 lmTempSensorsDevice.1 = STRING: temp1 lmTempSensorsDevice.2 = STRING: temp1 lmTempSensorsValue.1 = Gauge32: 26800 lmTempSensorsValue.2 = Gauge32: 100000 So, my question is two-fold: Why is the second sensor that is returned by SNMP giving a value of 100 C (when it should be 32 C) Why are my CPU core sensors not being returned by SNMP?

    Read the article

  • How do I install the old sensors-applet package?

    - by honestann
    I want to install sensors-applet onto my Ubuntu 12.04 computer. The instructions on this (and other) webpages says to enter this command in a command terminal: sudo apt-get install sensors-applet This is a gnome applet and gnome isn't exactly obscure. Why can sensors-applet package not be found? Before you say "no", note that I was able to execute "gnome-panel" to add a bar/panel along the bottom of my desktop, add 8 cpu-frequency applets to the bar (one per CPU core), and add gnome-panel to my startup applications. So I've already done the basics, and believe all I need now is to be able to download and install the sensors-applet to have that temperature applet available on the panel too. See here.

    Read the article

  • Thinkpad Edge e320 thermal sensors description

    - by koressak
    I have a quite specific question concerning description of thermal sensors of my notebbok Thinkpad Edge E320. I have a debian linux installed with lm_sensors package and running command sensors show eight different values without any description of course (temp1 through temp6). I would like to know which one is which (cpu, gpu, hdd, etc.) Using google I didn't find any specific material concerning this exact model. Coult someone point me in the right direction? Thank you in advance.

    Read the article

  • Can I get sensible labels for lm-sensors output for "applesmc-isa-0300"?

    - by TK Kocheran
    2011 8,3 Macbook Pro running 64bit 11.10. When I run sensors from the lm-sensors package, I get a lot of information, but no way to understand it: coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +53.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +53.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +52.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +50.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +49.0°C (high = +86.0°C, crit = +100.0°C) applesmc-isa-0300 Adapter: ISA adapter Left side : 2001 RPM (min = 2000 RPM) Right side : 2001 RPM (min = 2000 RPM) TB0T: +33.2°C TB1T: +33.2°C TB2T: +29.0°C TC0C: +52.8°C TC0D: +47.2°C TC0E: +51.8°C TC0F: +53.0°C TC0J: +1.0°C TC0P: +44.5°C TC1C: +52.0°C TC2C: +52.0°C TC3C: +52.0°C TC4C: +52.0°C TCFC: +0.2°C TCGC: +51.0°C TCSA: +52.0°C TCTD: +0.0°C TG0D: +44.5°C TG0P: +43.2°C THSP: +37.5°C TM0S: +57.5°C TMBS: +0.0°C TP0P: +50.0°C TPCD: +55.0°C The core temp info is really useful and I'm pretty sure that Left/Right Side refers to the two fans within, but otherwise, I have no idea what this information means. Is there something I can use to normalize this information?

    Read the article

  • Temperature monitoring on Dell Precision M4500 under Linux: sensors-detect doesn't, what next?

    - by Tikitu
    I have a Dell Precision M4500, Intel Core i5 CPU, running Linux (Ubuntu Lucid), and would like to keep an eye on CPU temperature. I've tried lm-sensors: sensors-detect didn't find any sensors; following its hint ("This is relatively common on laptops, where thermal management is handled by ACPI rather than the OS.") I tried acpi -V but got nothing thermal. The Gnome panel applet "Hardware Sensors Monitor" reports on GPU temperature but nothing else. What should I be trying next?

    Read the article

  • What does the fan speed sensor really report?

    - by T. Verron
    I have an overheating issue on my netbook (ASUS EeePC 1015PW), which I'm trying to troubleshoot. Using lm-sensors while overheating gave me this output : acpitz-virtual-0 Adapter: Virtual device temp1: +86.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4089 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +82.0°C (crit = +100.0°C) Core 1: +80.0°C (crit = +100.0°C) But I can't hear the fan. So I enabled manual pwm controling and set the fan to full speed, and after a few minutes I got this output : acpitz-virtual-0 Adapter: Virtual device temp1: +65.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4016 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +62.0°C (crit = +100.0°C) Core 1: +58.0°C (crit = +100.0°C) And this time I could hear the fan spinning. So there's quite obviously an issue with either fan control or fan monitoring. Hence the question : what kind of physical information does the fan sensor really report? Thank you PS. I should have added that the computer is a small, hard-to-disassemble netbook, so I can't and don't want to try experiments like "block the fan and see what the sensor reports".

    Read the article

  • Fan not detected by lm-sensors

    - by OrangeTux
    My fan is blowing hard, while my cpu temperature is 32 degrees I tried a lot of things to control my fan. Changed grub file GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi= pci=noacpi" _ GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=\"Linux\"" Ran sensors-detect : To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK Ran sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +34.0°C (crit = +90.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +34.0°C (high = +80.0°C, crit = +90.0°C) Core 2: +34.0°C (high = +80.0°C, crit = +90.0°C) Ran sudo start module-init-tools and sudo start module-init-tools module-init-tools stop/waiting As you can see my fan isn't detected. Running fancontrol gives me this: Loading configuration from /etc/fancontrol ... Error: Can't read configuration file Can you help me, please? I cannot use my laptop now in class. Thanks in advance. My system 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

    Read the article

  • Display an Android Sensors List

    - by Skatephone
    I'm trying to display a list of available sensors but it's like there are not! I was thinking that it was because of the emulator, but i tried it on the phone and the result is the same. private SensorManager mSensorManager; TextView mSensorsTot,mSensorAvailables; ...... public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); // Get the texts fields of the layout and setup to invisible mSensorsTot = (TextView) findViewById(R.id.sensoritot); mSensorAvailables = (TextView) findViewById(R.id.sensoridisponibili); // Get the SensorManager mSensorManager= (SensorManager) getSystemService(SENSOR_SERVICE); // List of Sensors Available List<Sensor> msensorList = mSensorManager.getSensorList(SensorManager.SENSOR_ALL); // Print how may Sensors are there mSensorsTot.setText(msensorList.size()+" "+this.getString(R.string.sensors)+"!"); // Print each Sensor available using sSensList as the String to be printed String sSensList = new String(""); Sensor tmp; int x,i; for (i=0;i<msensorList.size();i++){ tmp = msensorList.get(i); sSensList = " "+sSensList+tmp.getName(); // Add the sensor name to the string of sensors available } // if there are sensors available show the list if (i>0){ sSensList = getString(R.string.sensors)+":"+sSensList; mSensorAvailables.setText(sSensList); } } Thank's Valerio From Italy :)

    Read the article

  • Bad temperature sensors on Foxconn motherboard?

    - by Gawain
    I have a system with a Foxconn V400 series motherboard and AMD Athlon 3000+ processor. Ever since I got it a few years ago the fans (particularly the CPU fan) have been really loud. So recently I installed SpeedFan to see why they were running so fast. SpeedFan reported the CPU temperature to be 32C, and one motherboard sensor at about 26C. But the other two motherboard sensors were reporting 78C and 64C respectively. Naturally the fans were both maxed out because of this, with the CPU fan at 5800rpm and the case fan at 2400rpm. I opened the case and everything inside was literally cool to the touch, with the exception of the CPU heatsink which was slightly warm, but nowhere near 78C. It seems like the temperature sensors are either defective or being read incorrectly. Is there some way I can decrease my fan noise without risking damage to my processor? Some way to ignore those two temp sensors? Any help would be greatly appreciated.

    Read the article

  • SOA Composite Sensors : Good Practice

    - by angelo.santagata
    I was discussing a interesting design problem with a colleague of mine Niall (his blog) on the topic of how to cancel an inflight SOA Composite process.  Obviously one way to do this is to cancel the process from enterprise Manager ( http://hostort/em ) , however we were thinking this isnt a “user friendly” way of doing this.. If you look at Nialls blog you’ll see he’s highlighted a number of different APIs which enable you the ability to manipulate the SCA instance, e.g. Code Snippet to purge (delete) an instance How to determine the instanceId from a composite_sensor_value using the “composite_sensor_value” table How to determine a BPEL Process status using the cube_instance table   Now all of these require that you know the instanceId of your SOA Composite, how does one find this out? Well the easiest way of doing this is to create a composite sensor on the SCA component. A composite sensor is simply a way of publishing a piece of business data as part of your composite. The magic here is that you can later query composites based on this value. So a good best practice is that for any composites you create consider publishing a composite sensor value using a primary key of some sort , e.g. orderId, that way if you need to manipulate/query composites you can easily look up the instanceId using the sensorid.   For information on how to create a composite Sensor id see this documentation link  

    Read the article

  • WMI Sensors monitoring

    - by DmitrySemenov
    Monitoring tool Paessler stopped to monitor WMI Windows Sensors Paessler is Updated to version 12.4.5.3165. (10/30/2012 1:44:11 PM) Paessler windows sensors (against windows server 2008 R2 web edition) stopped to work (no changes have been made on server that we monitor) with the message Connection could not be established (80070005: Access is denied - Host: 192.168.2.10, User: Administrator, Password: **, Domain: ntlmdomain:) (code: PE015) However if I go to Virtual machine used to run Paessler and the following cscript runs successfully: strComputer = "192.168.2.10" Set objSWbemLocator = CreateObject("WbemScripting.SWbemLocator") Set objSWbemServices = objSWbemLocator.ConnectServer _ (strComputer, "root\cimv2", _ "Administrator", "pass") Set colProcessList = objSWbemServices.ExecQuery( _ "Select * From Win32_Processor") For Each objProcess in colProcessList Wscript.Echo "Process Name: " & objProcess.Name Next I'm getting output C:\>cscript test.vbs Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. Process Name: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz Process Name: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz So WMI works a. I gave Administrator credentials for Device to monitor in Paessler setting, the same I used in the script above b. I restarted windows server (broken sensors) - but this didn't help c. I restarted Paessler probe service - no effect any ideas?

    Read the article

  • Automatically detecting temperature sensors on startup (Ubuntu 10.10)

    - by dpitch40
    I am very close to achieving my goal of setting up a CPU temperature graph that is displayed in the top panel of my desktop. I have the applet and have gotten it to graph temperatures, which appear to be being sensed correctly. However, my machine doesn't find its temperature sensors by default; I have to run sudo modprobe coretemp for the sensors command to work, then log off and back in before the graph applet starts displaying my temperatures. I am wondering if I can somehow tell the kernel to load the coretemp module on startup so I don't have to keep doing these extra steps. I have tried putting this command in my startup applications, but I think its need for root permission is keeping this from working. Is there a way to set up startup applications with root permission, or some other way to ensure that this module is loaded at startup? If anyone is curious, I'm running 64-bit Ubuntu 10.10 on a Lenovo G770 laptop with a Core i5 processor and the 2.6.35 kernel.

    Read the article

  • Ubuntu 12.04 and KDE, graphical temperature monitor for GPU

    - by Frank
    I have ubuntu 12.04 and KDE. I already installed "lm-sensors", "hardware sensors indicator" and "Psensors" but none works well for me. I also know a couple of commands to find gpu temperature on terminal but I don't need that, I need a graphical application that works with kde to use. Do you know something that helps me? My card is MSI R6870 Hawk (from ATI original HD6870) and I have fglrx drivers Thanks

    Read the article

  • lm-sensor and cpu temperatures

    - by nalsanj
    i am on ubuntu Precise Pangolin. The processor is Intel i3. a desktop. i installed lm-sensors and below is the report "sensors" gave coretemp-isa-0000 Adapter: ISA adapter Core 0: +30.0°C (high = +89.0°C, crit = +105.0°C) Core 2: +33.0°C (high = +89.0°C, crit = +105.0°C) w83627dhg-isa-0a10 Adapter: ISA adapter Vcore: +0.93 V (min = +0.00 V, max = +1.74 V) in1: +0.75 V (min = +1.99 V, max = +1.99 V) ALARM AVCC: +3.36 V (min = +2.98 V, max = +3.63 V) +3.3V: +3.36 V (min = +2.98 V, max = +3.63 V) in4: +1.30 V (min = +0.90 V, max = +1.77 V) in5: +0.76 V (min = +1.15 V, max = +0.90 V) ALARM in6: +1.06 V (min = +0.94 V, max = +2.03 V) 3VSB: +3.36 V (min = +2.98 V, max = +3.63 V) Vbat: +3.36 V (min = +2.70 V, max = +3.30 V) ALARM fan1: 0 RPM (min = 3515 RPM, div = 128) ALARM fan2: 0 RPM (min = 10546 RPM, div = 128) ALARM fan3: 0 RPM (min = 10546 RPM, div = 128) ALARM fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM temp1: +39.0°C (high = -121.0°C, hyst = +9.0°C) ALARM sensor = diode temp2: +39.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode temp3: +127.0°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor cpu0_vid: +2.050 V intrusion0: OK radeon-pci-0100 Adapter: PCI adapter temp1: +70.5°C The fans sensors are detecting 0 RPM and some temperatures are out of range - the ALARMs above but i dont understand it very well. Can someone help out?

    Read the article

  • Bad temperature sensors on Foxconn motherboard?

    - by Gawain
    I have a system with a Foxconn V400 series motherboard and AMD Athlon 3000+ processor. Ever since I got it a few years ago the fans (particularly the CPU fan) have been really loud. So recently I installed SpeedFan to see why they were running so fast. SpeedFan reported the CPU temperature to be 32C, and one motherboard sensor at about 26C. But the other two motherboard sensors were reporting 78C and 64C respectively. Naturally the fans were both maxed out because of this, with the CPU fan at 5800rpm and the case fan at 2400rpm. I opened the case and everything inside was literally cool to the touch, with the exception of the CPU heatsink which was slightly warm, but nowhere near 78C. It seems like the temperature sensors are either defective or being read incorrectly. Is there some way I can decrease my fan noise without risking damage to my processor? Some way to ignore those two temp sensors? Any help would be greatly appreciated.

    Read the article

  • What the different hardware temperatures listed in psensor, sensor viewer etc reffer to?

    - by cipricus
    I have installed psensor and see a list of temperatures, but listed as ”Temperature 1”, 2, 3 etc . I can only guess where the processor is: but who's who for sure? The same question stands for Sensors Viewer. I can also type sensors in Terminal but I get no more than that acpi -t gives Thermal 0: ok, 65.0 degrees C Thermal 1: ok, 37.9 degrees C Thermal 2: ok, 56.0 degrees C Thermal 3: active, 71.0 degrees C Considering psensor, I know for a fact that: - the temperature that varies most depending on the CPU use is Temp1 and it is one of the two highest - the other high temperature is Temp4 and it goes to the ceiling when using youtube/flash - Temp2 is very stable at a medium level of 50-60 degrees Celsius - Temp3 is by far the lowest and most imobile So, I guess Temp1 is the CPU temperature, and Temp4 is the GPU temperature. Temp2 and 3 must be the motherboard and the hdd. Does anybody know for sure?

    Read the article

  • Problem Showing Sensors Details

    - by Skatephone
    Hi, i'm looking to show detail about sensors in an Actvity but when i put my app in to my phone i manage to view only details about the accellerometer, but the program says that i have 4 sensors: Accellerometer, Magnetic field, Orientation and Temperature. I'm using Android 1.6 and a htc Tattoo for testing. This is my code: public class SensorInfo extends Activity { private SensorManager mSensorManager; TextView mTextAcc,mTextGyr,mTextLig,mTextMag,mTextOri, mTextPre,mTextPro,mTextTem, mSensorsTotTitle,mSensorAvailablesTitle,mTextAccTitle,mTextGyrTitle,mTextLigTitle,mTextMagTitle,mTextOriTitle, mTextPreTitle,mTextProTitle,mTextTemTitle; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.detaillayout); // Get the texts fields of the layout and setup to invisible setTextViews(); // Get the SensorManager mSensorManager= (SensorManager) getSystemService(SENSOR_SERVICE); // List of Sensors Available List<Sensor> msensorList = mSensorManager.getSensorList(Sensor.TYPE_ALL); // Print Sensor Details Sensor sens; int type,i; String text = new String(""); // Do the list of available sensors on a String and print detail about each sensor for (i=0;i<msensorList.size();i++){ sens = msensorList.get(i); type = sens.getType(); text = " - "+getString(R.string.power)+" "+String.valueOf(sens.getPower())+"mA\n"; text+= " - "+getString(R.string.resolution)+" "+String.valueOf(sens.getResolution())+"\n"; text+= " - "+getString(R.string.maxrange)+" "+String.valueOf(sens.getMaximumRange ())+"\n"; text+= " - "+getString(R.string.vendor)+" "+sens.getVendor()+"\n"; text+= " - "+getString(R.string.version)+" "+String.valueOf(sens.getVersion()); switch(type) { // Check the type of Sensor that generate the event and show is resolution case Sensor.TYPE_ACCELEROMETER: mTextAccTitle.setVisibility(0); mTextAccTitle.setMaxHeight(30); mTextAcc.setVisibility(0); mTextAcc.setMaxHeight(100); mTextAcc.setText(text); // Print data of the Sensor break; case Sensor.TYPE_GYROSCOPE: mTextGyrTitle.setVisibility(0); mTextGyr.setVisibility(0); mTextGyr.setText(text); // Print data of the Sensor break; case Sensor.TYPE_LIGHT: mTextLigTitle.setVisibility(0); mTextLig.setVisibility(0); mTextLig.setText(text); // Print data of the Sensor break; case Sensor.TYPE_MAGNETIC_FIELD: mTextMagTitle.setVisibility(0); mTextMag.setVisibility(0); mTextMag.setText(text); // Print data of the Sensor break; case Sensor.TYPE_ORIENTATION: mTextOriTitle.setVisibility(0); mTextOri.setVisibility(0); mTextOri.setText(text); // Print data of the Sensor break; case Sensor.TYPE_PRESSURE: mTextPreTitle.setVisibility(0); mTextPre.setVisibility(0); mTextPre.setText(text); // Print data of the Sensor break; case Sensor.TYPE_PROXIMITY: mTextProTitle.setVisibility(0); mTextPro.setVisibility(0); mTextPro.setText(text); // Print data of the Sensor break; case Sensor.TYPE_TEMPERATURE: mTextTemTitle.setVisibility(0); mTextTem.setVisibility(0); mTextTem.setText(text); // Print data of the Sensor break; } } } // Get the texts fields of the layout and setup to invisible void setTextViews(){ mTextAccTitle = (TextView) findViewById(R.id.sensorAccTitle); mTextAccTitle.setVisibility(4); mTextAccTitle.setMaxHeight(0); mTextAcc = (TextView) findViewById(R.id.sensorAcc); mTextAcc.setMaxHeight(0); mTextAcc.setVisibility(4); mTextGyrTitle = (TextView) findViewById(R.id.sensorGyrTitle); mTextGyrTitle.setVisibility(4); mTextGyrTitle.setMaxHeight(0); mTextGyr = (TextView) findViewById(R.id.sensorGyr); mTextGyr.setVisibility(4); mTextGyrTitle.setMaxHeight(0); mTextLigTitle = (TextView) findViewById(R.id.sensorLigTitle); mTextLigTitle.setVisibility(4); mTextLigTitle.setMaxHeight(0); mTextLig = (TextView) findViewById(R.id.sensorLig); mTextLig.setVisibility(4); mTextLig.setMaxHeight(0); mTextMagTitle = (TextView) findViewById(R.id.sensorMagTitle); mTextMagTitle.setVisibility(4); mTextMagTitle.setMaxHeight(0); mTextMag = (TextView) findViewById(R.id.sensorMag); mTextMag.setVisibility(4); mTextMag.setMaxHeight(0); mTextOriTitle = (TextView) findViewById(R.id.sensorOriTitle); mTextOriTitle.setVisibility(4); mTextOriTitle.setMaxHeight(0); mTextOri = (TextView) findViewById(R.id.sensorOri); mTextOri.setVisibility(4); mTextOri.setMaxHeight(0); mTextPreTitle = (TextView) findViewById(R.id.sensorPreTitle); mTextPreTitle.setVisibility(4); mTextPreTitle.setMaxHeight(0); mTextPre = (TextView) findViewById(R.id.sensorPre); mTextPre.setVisibility(4); mTextPre.setMaxHeight(0); mTextProTitle = (TextView) findViewById(R.id.sensorProTitle); mTextProTitle.setVisibility(4); mTextProTitle.setMaxHeight(0); mTextPro = (TextView) findViewById(R.id.sensorPro); mTextPro.setVisibility(4); mTextPro.setMaxHeight(0); mTextTemTitle = (TextView) findViewById(R.id.sensorTemTitle); mTextTemTitle.setVisibility(4); mTextTemTitle.setMaxHeight(0); mTextTem = (TextView) findViewById(R.id.sensorTem); mTextTem.setVisibility(4); mTextTem.setMaxHeight(0); } } Tank's Valerio From Italy

    Read the article

  • Using Matlab to interface with sensors

    - by nortron
    Im currently an E.E. under grad. and i was curious about matlab, I am now on break and i want to take my matlab a step beyond what i know (which is beginner to intermediate). For an example, i heard about a student doing a project that involved matlab controlling sensors to detect sunlight (solar panel related) and I am not sure how he did it?

    Read the article

  • Linux AMD-FX 8350 temperature monitoring

    - by HyperDevil
    I’m trying to get the CPU temperature for my AMD-FX8350 on Debian Squeeze. I ran sensors-detect and then sensors, but I only get my motherboard sensors (it8720-isa-0228). There are three temperature values there but I assume those are not for the CPU. it8720-isa-0228 Adapter: ISA adapter in0: +1.36 V (min = +0.00 V, max = +4.08 V) in1: +1.50 V (min = +0.00 V, max = +4.08 V) in2: +3.38 V (min = +0.00 V, max = +4.08 V) in3: +2.93 V (min = +0.00 V, max = +4.08 V) in4: +3.07 V (min = +0.00 V, max = +4.08 V) in5: +4.08 V (min = +0.00 V, max = +4.08 V) in6: +4.08 V (min = +0.00 V, max = +4.08 V) in7: +2.93 V (min = +0.00 V, max = +4.08 V) Vbat: +3.01 V fan1: 3375 RPM (min = 10 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 1730 RPM (min = 10 RPM) fan5: 0 RPM (min = 0 RPM) temp1: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: +53.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode temp3: +65.0°C (low = +127.0°C, high = +90.0°C) sensor = thermal diode cpu0_vid: +0.000 V Is there anything I am missing? I also loaded the K8temp and K10temp modules and ran sensor-detect without any results. I do see this message in dmesg: hwmon-vid: Unknown VRM version of your x86 CPU

    Read the article

1 2 3 4 5 6 7 8 9 10 11  | Next Page >