Search Results

Search found 41 results on 2 pages for 'ulrik rasmussen'.

Page 1/2 | 1 2  | Next Page >

  • SQLBeat Podcast – Episode 4 – Mark Rasmussen on Machine Guns,Jelly Fish and SQL Storage Engine

    - by SQLBeat
    In this this 4th SQLBeat Podcast I talk with fellow Dane Mark Rasmussen on SQL, machine guns and jelly fish fights; apparently they are common in our homeland. Who am I kidding, I am not Danish, but I try to be in this podcast. Also, we exchange knowledge on SQL Server storage engine particulars as well as some other “internals” like password hashes and contained databases. And then it just gets weird and awesome. There is lots of background noise from people who did not realize we were recording. And I call them out and make fun of them as they deserve; well just one person who is well known in these parts. I also learn the correct (almost) pronunciation of “fjord”. Seriously, a word with an “F” followed by a “J”. And there are always the hippies and hipsters to discuss. Should be fun.

    Read the article

  • Dynamically invoke web service at runtime

    - by Ulrik Rasmussen
    So, our application needs support for dynamically calling web services which are unknown at compile time. The user should therefore be able to specify a URL to a WSDL, and specify some data bindings for the request and reply parameters. When Googling for answers, it seems like the way to do this is by actually compiling a web service proxy class at runtime, loading it, and invoking the methods using reflection. I think this seems like a rather clunky approach, given that I don't really need a strongly typed set of classes when I'm going to cast my data dynamically anyway. Dynamically compiling code for doing something that simple also just seems like The Wrong Way To Do It. Restricting ourself to the SOAP protocol, is there any library for C# that implements this protocol for dynamic use? I can imagine that it would be possible to generate runtime key/value data structures from the WSDL, which could be used to specify the request messages, as well as reading the replies. The library should then be able to send well-formed SOAP messages to the server, and parse the replies, without the programmer having to generate the XML manually (at least not the headers and other plumbing). I can't seem to find any library that actually does this. Is what I want to do really that esoteric, or have I just searched the wrong places? Thanks, Ulrik

    Read the article

  • Should classes from the same namespace be kept in the same assembly?

    - by Dan Rasmussen
    For example, ISerializable and the Serializable Attribute are both in the System.Runtime.Serialization namespace, but not the assembly of the same name. On the other hand, DataContract attributes are in the namespace/assembly System.Runtime.Serialization. This causes confusion when a class can have using System.Runtime.Serialization but still not have reference to the System.Runtime.Serialization assembly, meaning DataContract cannot be found. Should this be avoided in practice, or is it common for namespaces to be split over multiple assemblies? What other issues should one be careful of when doing this?

    Read the article

  • Will ranking be affected with a mobile XML sitemap for a mobile site with canonical URLs?

    - by Emil Rasmussen
    We have a site with both a desktop version and a mobile version. Most of the content are the same and both versions have the same URL, but the HTML generated is device specific. Looking at Google's recommendations for smartphone-optimized sites, one could get the impression that the mobile xml sitemap is only for sites with different URLs. Will ranking be affected - negatively or positively - if we add a mobile xml sitemap that effectively will be a duplicate of the desktop sitemap?

    Read the article

  • Will ranking be affected with a mobile XML sitemap for a mobile site with the same URLs as the desktop site?

    - by Emil Rasmussen
    We have a site with both a desktop version and a mobile version. Most of the content are the same and both versions have the same URL, but the HTML generated is device specific. Looking at Google's recommendations for smartphone-optimized sites, one could get the impression that the mobile xml sitemap is only for sites with different URLs. Will ranking be affected - negatively or positively - if we add a mobile xml sitemap that effectively will be a duplicate of the desktop sitemap?

    Read the article

  • Apache - "dynamic" rewrite rule

    - by Christian A. Rasmussen
    Hi there. I'm working on a Zend Framework project where I've stumbled across a bit of a problem. The problem originates from the fact that modules are 2nd class citizens in Zend Framework. In my project, I'd like for each module to have a folder containing files which are to be accessed from the outside - files such as stylesheets, javascripts and images. Now, how is this to be done. With a Zend Framework project I have a folder structure which looks like this: application/ modules/ moduleOne/ public/ stylesheet.css moduleTwo/ moduleThree/ public/ index.php The standard .htaccess file located in the public/ folder holds this: SetEnv APPLICATION_ENV development RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] The way it works, is that the project's apache DocumentRoot is the public/ folder. All requests gets redirected through the index.php file where Zend Framework's router component takes over. Now, I'm by no means an expert with Apache nor mod_rewrite so pardon me if this is just silly. I imagine that I implement an extra step in the existing rewrite rule so that if I request http://project/public/moduleOne/stylesheet.css it will for instance resolve to /var/www/project/application/modules/moduleOne/public/stylesheet.css. So the steps which need to be done is to check if the first element in the URI is public/ if it is, we take the next segment as the modules name and use that in the path we're trying to resolve to and attempt to serve the file. Is this at all possible or does anyone have a better suggestion? Thank you for your time Christian Rasmussen

    Read the article

  • How do you motivate peers to become better developers?

    - by Brian Rasmussen
    In my experience there seems to be two kinds of developers (if we simplify matters a great deal of course). On the one hand we have the developers, who may do a perfectly acceptable job, but who do not really care about the computer science part of their craft. They usually know few languages / technologies and are happy to let things stay that way. For whatever reason, they don't try to improve their computer science skills unless this is required in their current position. On the other hand, we have the geeks or the pragmatic programmers if you subscribe to that idea. They play around with other languages and technologies and usually have knowledge about several topics outside the technical domain of their current job. I would like to see more developers, who are enthusiastic about software development. If you share this point of view, what do you do to push your peers in that direction? Edit: follow-up question inspired by one of the answers: As non-managers, should we really care about this? And why/why not?

    Read the article

  • language problem ubuntu 13.10

    - by Dennis Rasmussen
    I just installed Ubuntu 13.10, and really enjoy it. I am from Denmark, and use the supported Danish keyboard-layout (and chose it as default in the install), but whenever i reboot Ubuntu switches back to English keyboard-layout, though the little icon in the panel says it's in Danish. I have to click on the icon every time to change it back to Danish. I tried removing the English keyboard-layout, but it didn't help. Any suggestions?

    Read the article

  • Language problem in Ubuntu 13.10

    - by Dennis Rasmussen
    I just installed Ubuntu 13.10, and really enjoy it. I am from Denmark, and use the supported Danish keyboard-layout (and chose it as default in the install), but whenever I reboot Ubuntu switches back to English keyboard-layout, though the little icon in the panel says it's in Danish. I have to click on the icon every time to change it back to Danish. I tried removing the English keyboard-layout, but it didn't help. Any suggestions?

    Read the article

  • ArchBeat Link-o-Rama for 2012-03-16

    - by Bob Rhubart
    Applications Architecture | Roy Hunter and Brian Rasmussen www.oracle.com Roy Hunter and Brian Rasmussen examine the strategies three organizations applied to modernize their application architectures. Part of the Oracle Experiences in Enterprise Architecture article series. Public Sector Architecture | Jeremy Foreman and Hamza Jahangir www.oracle.com Jeremy Foreman and Hamza Jahangir examine the strategies used by two different organizations in deploying their respective future-state architectures. Part of the Oracle Experiences in Enterprise Architecture article series. XMLA vs BAPI | Sunil S. Ranka sranka.wordpress.com Oracle ACE Sunil Ranka's brief primer on the XMLA and BAPI standards. The Java EE 6 Example - Running Galleria on WebLogic 12 - Part 3 | Markus Eisele blog.eisele.net Oracle ACE Director Markus Eisele continues his series on working with Galleria. Oracle Linux Online Forum - March 27 event.on24.com Date: Tuesday, March 27, 2012 Time: 9:30 AM PT / 12:30 PM ET Hosts: Oracle Executives Edward Screven and Wim Coekaerts. Customer Presentation: How Oracle Helps Reduce Cost and Improve Performance of Database Applications at Progressive Insurance Speaker: John Dome What's New in Oracle Linux Speakers: Waseem Daher, Chris Mason, Elena Zannoni, Lenz Grimmer Get More Value from your Linux Vendor Speakers: Sergio Leunissen, Chris Mason, Monica Kumar JavaOne 2012 Call for Papers www.oracle.com Don't keep all that Java skill locked up in your overstuffed cranium. Submit your proposal for that killer paper now to share your experience at this year’s JavaOne. Running applications in the cloud are not designed for the cloud | Tom Laszewski blogs.oracle.com "The issue you face with moving client/server applications to the cloud via rehosting is 'where will the applications run?'" says Tom Laszewski. GlassFish 3.1.2 - Which Platform(s)? | The Aquarium blogs.oracle.com The Aquarium shares a list of GlassFish 3.1.2-supported operating systems and JVMs. IT Strategies from Oracle; Three Recipes for Oracle Service Bus 11g ; Stir Up Some SOA www.oracle.com Featured this week on the OTN Architect Portal, along with the latest events, product downloads, community social resources, articles on hot topics, and a whole lot more. Thought for the Day "No matter what the problem is, it's always a people problem." — Gerald M. Weinberg

    Read the article

  • How does a web server/the http protocol handle version control and compression?

    - by Sune Rasmussen
    When a client browser requests a file from the web server, I know that some kind of check is performed, because the files needed to serve the web page may already be cached by the web browser. So, if a file exists in the cache, no files are sent. But if the file on the server has changed since the file was cached in the browser, the file is sent and updated anyhow. Then, if you have compression like gzipping enabled on the server, the files that are to be provided to the client must be gzipped on the way, requiring some amount of server side processing. But how is this managed? The logical approach seems to me, that the web server should have a cache as well, containing the newest version of all files that have been requested within a certain time span, thus a compressed version of these files, so that compression would not have to be done each time a files is requested. And also, how are files eventually requested? Does the browser ask for files, each time it encounters one in the HTML code and the specific file is not stored in the local cache, or does it sum all the files that are needed up and ask for the whole bunch at the same time? But that's only guessing from a programming point of view, and I don't really know. If the answers are very different among web server systems, I'm primarily interested in Apache, but other answers are appreciated, too.

    Read the article

  • How to restore infrared support in Windows XP?

    - by Emil Rasmussen
    My infrared port is not working on my Windows XP SP 3 (Thinkpad X60). I can see it Device Manager, and it's status is, that it is working probably. The problem manifests in several ways. Originally I was trying to transfer data from my Polar RS800CX watch, and the Polar ProTrainer 5 software gave me the this error message: "Communication port couldn't be opened". Then I tried to connect the watch to another computer, and the infrared connection was established immediately. I then tried to connect the other computer to my Thinkpad X60. The other computer again immediately showed the Wireless Link icon "'computername' is in range" in the notification area. But nothing is shown on the Thinkpad, and a file transfer to the Thinkpad is unsuccessful with an error message that reports that "the target machine actively refused it [the connection]". This brings me to conclude that the infrared support in Windows on the Thinkpad is somehow broken. This is further supported by the fact that I can't find the "Wireless Link" icon in the Control Panel and when I try to run the irprops.cpl nothing happens. So the question is, how to reinstall the infrared support? Some of the solutions that I have explored is: I have tried to disable/enable the infrared in the BIOS - to trick a re-installation. The IR modules settings on the other computer that can get a successful IR connection is an exact match to the ThinkPad that can't get a connection. The was a problem in Windows XP SP 2 with the Wireless Link icon - MS KB article - but that hotfix can't be applied on SP 3 installation. I also guess that the hotfix is included in SP 3. Any other suggestions?

    Read the article

  • PPTP connection fails with errors 800/806

    - by Mark S. Rasmussen
    I've got a client (Server 2008 R2) that won't connect to our production environment PPTP VPN server (Server 2003, running RRAS). The server is behind a firewall that has TCP1723 open as well as GRE. Other clients at our office are able to connect just fine. Our office is behind a Juniper SSG5-Serial firewall, but all outgoing traffic is allowed, and multiple other clients are able to connect to VPN servers without issues. I've also setup a completely different VPN server on another network outside of our office. The functioning clients connect just fine - the Server 2008 R2 machine doesn't. Thus it's definitely a problem with this machine in particular. I've rebooted it. I've disabled the firewall, no dice on either. I've run PPTPSRV and PPTPCLNT on the server/client and they're able to communicate perfectly - indicating there's no problem using neither TCP1723 nor GRE. The Server 2008 R2 machine is also running as a VPN server itself (incoming connection) and that's working perfectly. We have the issues no matter if there are active incoming connections or not. I'm not sure what my next debugging step would be; any suggestions? EDIT: The event log on the server has the following warning from RasMan: A connection between the VPN server and the VPN client xxx.xxx.xxx.xxx has been established, but the VPN connection cannot be completed. The most common cause for this is that a firewall or router between the VPN server and the VPN client is not configured to allow Generic Routing Encapsulation (GRE) packets (protocol 47). Verify that the firewalls and routers between your VPN server and the Internet allow GRE packets. Make sure the firewalls and routers on the user's network are also configured to allow GRE packets. If the problem persists, have the user contact the Internet service provider (ISP) to determine whether the ISP might be blocking GRE packets. Obviously this points to GRE being a potential problem. But seeing as I have other clients connectiong without problems, as well as PPTPSRV and PPTPCLNT being able to communicate, I'm suspecting this might be a red herring. EDIT: Here are the anonymized events logged by the client in chronological order: CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has started dialing a VPN connection using a per-user connection profile named ZZZ. The connection settings are: Dial-in User = XXX\YYY VpnStrategy = PPTP DataEncryption = Require PrerequisiteEntry = AutoLogon = No UseRasCredentials = Yes Authentication Type = CHAP/MS-CHAPv2 Ipv4DefaultGateway = No Ipv4AddressAssignment = By Server Ipv4DNSServerAssignment = By Server Ipv6DefaultGateway = Yes Ipv6AddressAssignment = By Server Ipv6DNSServerAssignment = By Server IpDnsFlags = Register primary domain suffix IpNBTEnabled = Yes UseFlags = Private Connection ConnectOnWinlogon = No. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY is trying to establish a link to the Remote Access Server for the connection named ZZZ using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has successfully established a link to the Remote Access Server using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The link to the Remote Access Server has been established by user XXX\YYY. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY dialed a connection named ZZZ which has failed. The error code returned on failure is 806. Running Wireshark on the client shows it trying and retrying to send a "71 Configuration Request" While the server shows the incoming client requests, but apparently without replying: Given that this is GRE traffic, I think rules out the GRE traffic being blocked. Question is, why doesn't the server reply? This is the Configuration Request the server receives from the non functioning client (meaning no response is sent to the client request): And this is the Configuration Request the server receives from the working client: To me they seem identical, except for differing keys and magic numbers, and the fact that one client receives a response while the other doesn't.

    Read the article

  • Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

    - by Mark S. Rasmussen
    As we've been having some problems with sporadic packet loss, I've been preparing a replacement router (also an SSG5) for our current Juniper SSG5. I've setup the new SSG5 identically to the old one. We have a /29 IP range with a single IP setup as a MIP map to a server and two others being used for VIP maps. Each VIP/MIP is accompanied by relevant policies. Long story short - we tried connected the new SSG5 and some things were not working as they should. No problem, I just reconnected the old one. However, some things are still broken, even when I reconnected the old one. I fear I may have inadvertently changed some settings while browsing through old settings in my attempt to reconfigure the new SSG5 unit. All inbound traffic seems to work as expected. However, the 192.168.2.202 server can't initiate any outbound connections. It works perfectly on the local network, but any pings or DNS lookups to external IP's fail. The MIP & VIP map to it works perfectly - I can access it through HTTP and RDP without issues. Any tips on what to debug, or where I've messed up my config? I've attached the full config here (with anonymized IPs): set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin auth timeout 10 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "DMZ" tcp-rst set zone "VLAN" block unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 212.242.193.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 212.242.193.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 212.242.193.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 212.242.193.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname iplan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname nzlan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 212.242.193.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set pak-poll p1queue pak-threshold 96 set pak-poll p2queue pak-threshold 32 set flow tcp-mss unset flow tcp-syn-check set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set ike respond-bad-spi 1 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit traffic set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "HTTP" permit traffic priority 0 set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(212.242.193.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

    Read the article

  • Where can I compare monitors with a given VESA mount?

    - by Dan Rasmussen
    I am looking into purchasing a dual-monitor setup, and need to purchase two monitors with VESA MIS-D mounts. My only problem is that that information doesn't seem to be readily available on most shopping websites. Neither Amazon nor Newegg seem to have the information searchable or filterable. I could shop for monitors, then Google around to see if they support VESA MIS-D, but is there a better way? Is there a resource (not necessarily a store - once I find a monitor I can shop elsewhere) where I can browse a variety of monitor specs and reviews while only looking at monitors with a certain VESA mount?

    Read the article

  • Stack-based keyboard delay using Logitech MX3100 keyboard

    - by Mark S. Rasmussen
    I've been using a Logitech Cordless Desktop MX3100 keyboard for quite a while. I've never really had any problems, except for the occasional typo. I noticed however that I tended make the typo "Laod" instead of "Load", quite a bit more often than any other typos. As it started to get on my nerves, I decided to do some testing. What I found out was than when I write lowercase "load", I'd never make the typo. All uppercase, or just uppercase L, I'd make the typo quite often. My actual (very scientific) testing is probably best described by showing the output: moatmoatmoat MoatMoatMoat loatloatloat LaotLaotLaot loafloafloaf LaofLaofLaof hoathoathoat HoatHoatHoat hoadhoadhoad HoadHoadHoad lortlortlort LrotLrotLrot What i found out was that whenever shift was depressed, typing an uppercase "L" would induce a significant lag if the next character was an "o", compared to the lag of the any other key: High "o" lag: LoLoLoLoLoLo No "a" lag: LaLaLaLaLaLa No lag for neither "o" nor "a": lolololololo lalalalalala By realizing this I regained a slight bit of sanity as I knew I wasn't coming down with a case of Parkinsons. I was actually typing correctly, the lag just interpreted it wrongly. Now, what really bugs me is that I can't fathom how this is occurring. What I'm actually typing, in physical order, is this: L - o - a - d, and yet, the "a" is output before the "o", even though "o" was pressed before "a". So while the keyboard is processing the "Lo" combo, the "a" gets prioritized and is inserted before the "o" is done processing, resulting in Laod instead of Load. And this only happens when typing "Lo", not when typing lowercase "lo". This problem could stem from the keyboard hardware, the receiver hardware or the keyboard software driver. No matter the fault location however, I can't imagine how this could be implemented as anything but a FIFO queue. A general delay, sure, I could live with that, albeit I'd be irritated. But a lag affecting different keys differently, and even resulting in unpredictable outcome - that just doesn't make any sense. I've solved the problem by just switching to a wired keyboard. I just can't shake it off me though; what kind of bug/error/scenario would result in a case like this? Edit: It's been suggested that I stop drinking Red Bull and stick to water instead. While that may actually help solve the issue, I'm really not looking for a solution as such. I'm more interested in an explanation of how this could happen, as I can't imagine any viable technical solution that could result in this behavior.

    Read the article

  • Allowing connections initiated from outside

    - by Mark S. Rasmussen
    I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

    Read the article

  • Recurring events repeatedly saves a draft every minute

    - by Henrik Rasmussen
    Using Outlook 2010, some of my recurring (planned, not drafts) events is saving a draft to my Drafts folder every single minute as long as it's active. An example taken from real life is that I have a calendar entry (Appointment) occuring every day from 24-09-2012 until 28-09-2012 from 08:00 to 16:00 (GMT+1) with a blue category, only one participant (me) with subject but without a place. So every minute from 24-09-2012 until 28-09-2012 from 08:00 to 16:00, but not from 16:00 to 08:00, a new draft is automatically saved in my Drafts folder. How do I get rid of that behaviour? Addition here: Removing the offending event just allows a new one to take its place. There doesn't seem to be much on the sites - Microsoft calls it a "personal" issue, but there are more and more instances.

    Read the article

  • Why does waking a PC up with a timer act differently than with the power button?

    - by Dan Rasmussen
    I have a Windows 7 machine set up as a server. It has no monitor and is only accessed through remote desktop. I set up two scheduled tasks, one to put the computer to sleep at night and another to wake it up in the morning. When it's woken up from sleep via a timer, it stays awake for only a couple minutes before going back to sleep. When woken up by pushing the power button, however, it stays awake all the way until the sleep timer. Why does my PC behave differently in these two scenarios? I have set the PC not to prompt for a user's password on wake, since I worried that the login screen might follow different power rules. I tried SmartPower Configuration but had the same problems. I can provide more details if questions are asked in the comments, but I'm not sure what's relevant.

    Read the article

  • Can USB Hubs affect peripheral performance?

    - by Daniel Rasmussen
    Like many laptops, mine has 2 USB 2.0 ports. I'm looking to purchase a USB hub for my peripheral devices. I'm also planning on purchasing a laptop cooler with two USB powered fans, which connects to a USB port but can extend the plug, so it doesn't use one up. (Sorry for the poor description; see the link for a picture.) My questions are these: Can one plug 'too many' peripherals into a USB port? Can I plug my fans into a port, then the hub into the fans, then my keyboard and mouse, mic, and webcam into the extender..? Is it possible to draw too much power from a port? Secondly, will a USB hub affect the performance of any of my devices? I'm mostly worried about my mouse and keyboard. I like wired mice because I've noticed some lag in my Bluetooth mouse.

    Read the article

  • Best way to review pdf documents

    - by Anders Rasmussen
    I'm looking for an easy way to get my pdf document reviewed. I would prefer an online solution, where I just upload my document and then sent out an url to my reviewers. They can then give comments through the website without any special software installed.

    Read the article

  • Centos mysql version is 5.5 however PHPmyadmin still says version 5.1

    - by Marc Rasmussen
    When i run the following in my console: [root@****~]# mysql -u root -p -e 'SELECT VERSION();' Enter password: +-----------+ | VERSION() | +-----------+ | 5.5.39 | +-----------+ Which should be the correct version. However when i enter my PHPMYADMIN on my server it has the following specs: Server: Localhost via UNIX socket Program: MySQL Programversion: 5.1.73 - Source distribution So which version is the correct one and how do i make sure that the database is running on 5.5? Note I have already restarted sql several times without any changes

    Read the article

  • Microsoft Word "Random" Crashes

    - by Bent Rasmussen
    Word seemingly randomly crashes in an application setting where it is first being used to programmatically databind (bookmarks) and then directly afterwards opened on the user machine for further user input. The error message is quite precise but the workaround has eluded me. Word crashes a moment or two after it has been opened on the user machine with the below exception details. Problem signature: Problem Event Name: APPCRASH Application Name: WINWORD.EXE Application Version: 14.0.6129.5000 Application Timestamp: 5082f354 Fault Module Name: wwlib.dll Fault Module Version: 14.0.6129.5000 Fault Module Timestamp: 5082f3dc Exception Code: c0000005 Exception Offset: 000eed32 OS Version: 6.1.7601.2.1.0.16.7 Locale ID: 1030 Additional information about the problem: LCID: 1030 skulcid: 1030 Sometimes one can run the exact same scenario 50 times before experiencing a crash, other times only a few times. We have tried using different versions of the Word format as well as renaming the databound file after saving so that the file being opened on the user machine is different. Principally Word should never crash but perhaps there is some workaround that can make Word not crash. Googling for a solution there appears to be multiple things that can trigger this bug.

    Read the article

  • SQL Server Storage Internals 101

    This article is an extract from the book Tribal SQL. In this article, Mark S. Rasmussen offers a concise introduction to the physical storage internals behind SQL Server databases. He doesn't dive into every detail, but provides a simple, clear picture of how SQL Server stores data. Deployment Manager 2 is now free!The new version includes tons of new features and we've launched a completely free Starter Edition! Get Deployment Manager here

    Read the article

  • Intermittent Could not load file or assembly / PolicyExceptions

    - by Mark S. Rasmussen
    Intermittently we'll get errors like these from our .NET 3.5 web applications: Exception: System.Configuration.ConfigurationErrorsException: Could not load file or assembly 'itextsharp, Version=4.1.2.0, Culture=neutral, PublicKeyToken=8354ae6d2174ddca' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418) (C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Config\web.config line 59) ---> System.IO.FileLoadException: Could not load file or assembly 'itextsharp, Version=4.1.2.0, Culture=neutral, PublicKeyToken=8354ae6d2174ddca' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418) File name: 'itextsharp, Version=4.1.2.0, Culture=neutral, PublicKeyToken=8354ae6d2174ddca' ---> System.Security.Policy.PolicyException: Execution permission cannot be acquired. at System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Boolean checkExecutionPermission) at System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Int32& securitySpecialFlags, Boolean checkExecutionPermission) at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.Load(String assemblyString) at System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) --- End of inner exception stack trace --- at System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) at System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() at System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) at System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() at System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) at System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) at System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) at System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath virtualPath) at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) at System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) at System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean noAssert) at System.Web.Compilation.BuildManager.GetCompiledType(String virtualPath) at System.Web.Script.Services.WebServiceData.GetWebServiceData(HttpContext context, String virtualPath, Boolean failIfNoData, Boolean pageMethods, Boolean inlineScript) at System.Web.Script.Services.RestHandler.CreateHandler(HttpContext context) at System.Web.Script.Services.ScriptHandlerFactory.GetHandler(HttpContext context, String requestType, String url, String pathTranslated) at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Inner exception: System.IO.FileLoadException: Could not load file or assembly 'itextsharp, Version=4.1.2.0, Culture=neutral, PublicKeyToken=8354ae6d2174ddca' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418) File name: 'itextsharp, Version=4.1.2.0, Culture=neutral, PublicKeyToken=8354ae6d2174ddca' ---> System.Security.Policy.PolicyException: Execution permission cannot be acquired. at System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Boolean checkExecutionPermission) at System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Int32& securitySpecialFlags, Boolean checkExecutionPermission) at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.Load(String assemblyString) at System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) web.config line 59 being: <add assembly="*"/> When these occur, the sites will YSOD untill we recycle the application pool. The sites may run for days/weeks before this occurs, or it might happen twice within the hour. I have not been able to pinpoint this to any specific request/function in our system. In this case it points to itextsharp, but it randomly points to any assembly referenced by our application, both internal and external. Running caspol verifies that the DLL has full trust permissions: C:\Windows\Microsoft.NET\Framework64\v2.0.50727>caspol -rsg D:\...\bin\itextsharp.dll Microsoft (R) .NET Framework CasPol 2.0.50727.3053 Copyright (c) Microsoft Corporation. All rights reserved. Level = Enterprise Code Groups: 1. All code: FullTrust Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust Level = User Code Groups: 1. All code: FullTrust Success Our application is running on three servers, two of them are on Server 2008 Web x64 while the third is running Server 2008 R2 Web x64, all have .NET 3.5 installed, no .NET 4.0 installations. The problem only occurs on the first two that are running 2008 non R2. Running depends.exe on all three servers gives equal results for the nonR2 servers: My DLL is shown as x86 (compiled as AnyCPU, running in x64 w3wp), all other modules show as x64. Missing IESHIMS.DLL and LINKINFO.DLL - both of these seem to be red herrings according to Google. The third server shows the same, except it does not miss LINKINFO.DLL All servers are running IIS7 (7.5 for the R2 one) under a custom domain account that has been granted the necessary permissions: aspnet_regiis -ga [user] Load user profile is set to false on all three servers. I've tried setting this to true on one of the faulting servers, according to: http://stackoverflow.com/questions/1846816/iis7-failed-to-grant-minimum-permission-requests By running processmonitor I can see that it's now using the C:\Users\TEMP\AppData\Local\Temp directory for various temp files - the other ones are not using any such directory. So far I'll let it run in this way to see if this changes anything. I'm in doubt however given that the third server is not exhibiting the problems, yet still has "Load user profile" set to the same value, false. I've also tried running Fuslogvw on all three servers, logging binding failures to disk. All three servers report the same binding errors for VJSharpCodeProvider and CppCodeProvider, but these seem to be normal as well and can be solved by not defining the DEBUG and TRACE constants during build. We're running about 500 websites on each server (identical, load balanced), of which 50 are under moderate load, the problem has arisen both under heavy load as well as under minimal load however. Right now I'm waiting for the errors to happen again so I can hopefully see a pattern and determine whether "Load user profile" alleviates the issue. Any suggestions in the meantime would be very welcome! Also, I don't understand how the lack of "Load user profile" would cause an issue like this? And even further, how it would seemingly work on R2 but not on plain 2008? Thanks!

    Read the article

1 2  | Next Page >