Search Results

Search found 200 results on 8 pages for 'yyy'.

Page 1/8 | 1 2 3 4 5 6 7 8  | Next Page >

• How to make xxx.one.com load content from yyy.two.com

  - by Roy Peleg

  Hello, I'm currently in need to have xxx.one.com load the content of yyy.two.com. That means that when someone will enter xxx.one.com they'll actually see the content of yyy.two.com (URL in the browser won't change and will remain xxx.one.com). The domains are hosted on separate hosting company. yyy.two.com is on a cPanel and xxx.one.com is on an unknown hosting plan, though I can get its details. yyy.two.com have the same IP of www.two.com and this cannot be changed (as the hosting company told me). Any ideas on how do I tackle this issue? Thanks, Roy

  Read the article

• Virtual Private Hosting DNS configuration

  - by Ciel

  I did a great deal of reading here before posting this because I didn't want to post a duplicate - but I'm on a bit of a deadline and getting frustrated, so here goes... I very, very, very sincerely apologize if this is long winded or hard to read. Please - please just ask for any information or clarification and I will give it as quickly as I possibly can. This has become very frustrating to me and this is the last place I know to turn. I have no experience with setting up DNS, no experience with nameservers, and no peers to go to for help. So this is kind of my last ditch effort. The task of setting up a private server has, through circumstances beyond my control, fallen into my lap. I own a domain (hereafter referred to as yyy.com) and have always used shared hosting - I buy a package and just point it to the domain nameservers they give me. It's always been simple. yyy.com is registered with network solutions Now I have purchased a Virtual Private Hosting package from GoDaddy.com - and it comes with Plesk 11. I have no earthly idea how to begin to get the right nameserver for yyy.com. I have gone through the instructions and have wound up exceedingly frustrated. I have 2 IP addresses from GoDaddy for the server. This is what I have so far, and I cannot tell if it is working (Since propogation takes so long, it is extremely hard to test for me) IP 1 : XX.XX.XX.XX IP 2 : YY.YY.YY.YY (obviously hidden for privacy) Now after going through the documentation setup and waiting a few days, this is the setup I have - and so far it does not appear to be working. Host Record type Value XX.XX.XX.XX / 24 PTR yyy.com. yyy.com. NS ns1.yyy.com. yyy.com. A XX.XX.XX.XX yyy.com. MX (10) mail.yyy.com. ftp.yyy.com. CNAME yyy.com. ipv4.yyy.com. A XX.XX.XX.XX mail.yyy.com. A XX.XX.XX.XX mssql.yyy.com. A XX.XX.XX.XX ns1.yyy.com. A XX.XX.XX.XX ns2.yyy.com. A YY.YY.YY.YY webmail.yyy.com. A XX.XX.XX.XX www.yyy.com. CNAME yyy.com. yyy.com is pointing to both ns1.yyy.com and ns2.yyy.com Can anyone give me some assistance here? This is a learning experience for me and days of documentation have left me very confused.

  Read the article

• Android: Could not find method XXX, referenced from method YYY

  - by alex2k8

  I have two android projects, ProjA requires ProjB (in Eclipse Properties Java Build Path Projects Add ProjB). Every thing compiles ok in Eclipse, but when I run ProjA I get an error: Could not find method XXX, referenced from method YYY. Where XXX - is the method from ProjB. How can I fix the settings?

  Read the article

• Why does my MySQL remote-connection fail (VLAN)?

  - by Johannes Nielsen

  ubuntu-community! Again I have a problem with my special friend MySQL :D I have got two servers - a database-server and a web-server - who are connected via VLAN. Now I want the web-server to have remote access to the database-server's MySQL. So I created the user user in mysql.user. user's Host is xxx.yyy.zzz.9 which is the internal IP-address of the web-server. xxx.yyy.zzz.0 is the network. I also created user with Host % . As long as I use MySQL on the database-server logging in as user, everything works fine. But trying to log in as user from xxx.yyy.zzz.9 using mysql -h xxx.yyy.zzz.8 -u user -p (where xxx.yyy.zzz.8 is the database-server's internal IP), I get ERROR 2003 (HY000): Can't connect to MySQL server on 'xxx.yyy.zzz.8' (110) So I tried to activate Bind-Address in the my.cnf file. Well, if I use xxx.yyy.zzz.8, nothing changes. But if I try xxx.yyy.zzz.9 and try to restart MySQL, I get mysql stop/waiting start: Job failed to start I checked the log files and found - nothing. The database-server's MySQL doesn't even register, that the web-server tries to connect remotely. My idea is, that maybe I didn't configure the VLAN properley, even though I asked someone who actually knows such stuff and he told me, I did everything right. What I wrote into /etc/networking/interfaces is: #The VLAN auto eth1 iface eth1 inet static address xxx.yyy.zzz..8 netmask 255.255.255.0 network xxx.yyy.zzz.0 broadcast xxx.yyy.zzz.255 mtu 1500 ifconfig returns eth1 Link encap:Ethernet HWaddr xxxxxxxxxxxxxx inet addr:xxx.yyy.zzz.8 Bcast:xxx.yyy.zzz.255 Mask:255.255.255.0 inet6 addr: xxxxxxxxxxxxxxx/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:241146 errors:0 dropped:0 overruns:0 frame:0 TX packets:9765 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:17825995 (17.8 MB) TX bytes:566602 (566.6 KB) Memory:fb900000-fb920000 for the eth1, what is, what I configured. (This is for the database-server, the web-server looks similar). ethtool eth1 returns: Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000003 (3) drv probe Link detected: yes (This is for the database-server, the web-server looks similar). Actually I think, everything is right, but it still doesn't work. Is there someone with an idea? EDIT: I commented ou Bind-Address in my.cnf after it didn't work.

  Read the article

• Warning: XXX may not respond to YYY

  - by Aurel300

  Hey, I am making some stuff in Objective-C++... And I must say that I am a total newbie when it comes to the Objective-C part... I don't really want to learn it, I kinda just need it for accessing a few Mac APIs (ObjC is such a dumb language). So - compiling with g++ -x objective-c++ - and I somehow keep getting this warning: XXX may not respond to YYY First it was with a NSScreen, now it is with a NSWindow: NSWindow may not respond to +initWithContentRect:styleMask:backing:defer: I saw somewhere that I should cast it to id, but didn't work, throwing absolutely cryptic errors... So - WHAT does this warning actually mean and HOW am I supposed to make it stop?

  Read the article

• What's your advise on a potential legal suit? [closed]

  - by ohho

  I [xxx app developer] received an email from Apple that a developer [of yyy app] believes I am "infringing their copyright." Description of Issue: [xxx developer] copied my application (my application is [yyy]) feature by feature. Even their donation model is completely copied from my application. Their first release was significantly later than mine, which implies copying of the application rather than parallel development. I suffered significant financial losses because of their actions, in additional to promotion problems as many people are confused with their product. My advertising was based around the idea of a "free [yyy] application for an iPhone" and they have just taken that as a title for their application. I would appreciate if someone takes a look at their release schedule and compare it to my releases. Additionally, please take a look at their functionality and how it point by point copies the functionality of my older releases. I am asking Apple to remove their application from the App Store, and ban them from resubmitting it. Thank you for your time! [yyy developer], the developer of the [yyy] application. My response was: The code of [xxx] is written by myself, using Apple public API. The graphics elements are designed by myself. The user interface and app control are independently designed and different from other [similar type] apps (please judge yourself). In-app Purchase is iOS Apple standard API. iAd is Apple iOS standard API. I don't think features can be owned exclusively. In fact, my app comes with fewer features, as I prefer minimalist design. I don't think idea can be owned exclusively. Apple responded: Thank you for your response. Unfortunately, Apple cannot serve as arbiter for disputes among third parties. Please contact [yyy developer] directly regarding your actions. You can reach [yyy developer] through: [...]. We look forward to confirmation from both parties that this issue has been resolved. If this issue is not resolved shortly, Apple may be forced to pull your application(s) from the App Store. Then I sent my response above to [yyy developer]. [yyy developer] then asked me "to provide (my) legal address and contact details that (his) lawyer requires to file a copyright infringement suit." IMO, I don't think the [yyy developer]'s claim on "feature by feature" copy is valid. I have fewer features, completely different user interface design. However, I don't think I can afford a legal action for an app of so little financial return. So what's your advise on this? Should I just let Apple pull my app? Or is there any alternative I can consider? FYI ... UI of [xxx app]: and UI of [yyy app]:

  Read the article

• Packets marked by iptables only sent to the correct routing table sometimes

  - by cookiecaper

  I am trying to route packets generated by a specific user out over a VPN. I have this configuration: $ sudo iptables -S -t nat -P PREROUTING ACCEPT -P OUTPUT ACCEPT -P POSTROUTING ACCEPT -A POSTROUTING -o tun0 -j MASQUERADE $ sudo iptables -S -t mangle -P PREROUTING ACCEPT -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -P POSTROUTING ACCEPT -A OUTPUT -m owner --uid-owner guy -j MARK --set-xmark 0xb/0xffffffff $ sudo ip rule show 0: from all lookup local 32765: from all fwmark 0xb lookup 11 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table 11 10.8.0.5 dev tun0 proto kernel scope link src 10.8.0.6 10.8.0.6 dev tun0 scope link 10.8.0.1 via 10.8.0.5 dev tun0 0.0.0.0/1 via 10.8.0.5 dev tun0 $ sudo iptables -S -t raw -P PREROUTING ACCEPT -P OUTPUT ACCEPT -A OUTPUT -m owner --uid-owner guy -j TRACE -A OUTPUT -p tcp -m tcp --dport 80 -j TRACE It seems that some sites work fine and use the VPN, but others don't and fall back to the normal interface. This is bad. This is a packet trace that used VPN: Oct 27 00:24:28 agent kernel: [612979.976052] TRACE: raw:OUTPUT:rule:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976105] TRACE: raw:OUTPUT:policy:3 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976164] TRACE: mangle:OUTPUT:rule:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976210] TRACE: mangle:OUTPUT:policy:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976269] TRACE: nat:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976320] TRACE: filter:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976367] TRACE: mangle:POSTROUTING:policy:1 IN= OUT=tun0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976414] TRACE: nat:POSTROUTING:rule:1 IN= OUT=tun0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb and this is one that didn't: Oct 27 00:22:41 agent kernel: [612873.662559] TRACE: raw:OUTPUT:rule:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662609] TRACE: raw:OUTPUT:policy:3 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662664] TRACE: mangle:OUTPUT:rule:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662709] TRACE: mangle:OUTPUT:policy:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662761] TRACE: nat:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662808] TRACE: filter:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662855] TRACE: mangle:POSTROUTING:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb I have already tried "ip route flush cache", to no avail. I do not know why the first packet goes through the correct routing table, and the second doesn't. Both are marked. Once again, I do not want ALL packets system-wide to go through the VPN, I only want packets from a specific user (UID=999) to go through the VPN. I am testing ipchicken.com and walmart.com via links, from the same user, same shell. walmart.com appears to use the VPN; ipchicken.com does not. Any help appreciated. Will send 0.5 bitcoins to answerer who makes this fixed.

  Read the article

• Serving wildcard subdomains from the mulitple servers.

  - by user489176

  I have a web application to which I want users to login only through their unique sub-domain (the sub-domain will be chosen at signup). So that I can scale the application across a number of servers, what would be the best way to set up Apache to always serve the same subdomains from the same server? For instance: matt.yyy.com, helen.yyy.com, terry.yyy.com are always served from server with ip of xxx.xxx.xxx.xxx suzi.yyy.com, fred.yyy.com, tom.yyy.com are always served from server with ip of xxx.xxx.xxx.xxx

  Read the article

• Using Virtual Domains with WordPress and Cherokee Web Server

  - by ikevinjp

  I'm trying to configure WordPress to work with Cherokee Web Server. The multi-site set up in WordPress is yyy.com and uses 'sub-domains'. Thus, I have sites like aaa.yyy.com, bbb.yyy.com - they all work fine so far. However, I have another completely different domain: abcde.com. Within WordPress, the sub-domain set up is abcde.yyy.com. When a public user accesses abcde.com, it cannot properly be redirected to the WordPress sub-domain abcde.yyy.com. How do I set up Cherokee to properly redirect virtual domains to WordPress? That means, the domain facing public would be abcde.com but WordPress would want to see abcde.yyy.com to properly return the correct content for the specific site. (I tried and it always get redirected to something like this: "http://yyy.com/wp-signup.php?new=abcde.com")

  Read the article

• Connecting debian and windows via IPsec VPN with Racoon and ipsec-tools

  - by Michi Qne

  I've some trouble with the IPsec configuration on my debian server (6 squeeze). This server should connect via IPsec VPN to an windows server, which is protected by an firewall. I've used racoon and ipsec-tools and this tutorial http://wiki.debian.org/IPsec. However, I am not quite sure, if this tutorial fits to my purpose, because of some differences: my Host and my gateway are the same server. So I don't have two different ip addresses. I guess, that's not a problem the other server is an windows system behind a firewall. Hopefully, not a problem the subnet of the windows system is /32 not /24. So I change it to /32. I worked through the tutorial step by step, but I wasn't able to route the ip. The following command didn't work for me: ip route add to 172.16.128.100/32 via XXX.XXX.XXX.XXX src XXX.XXX.XXX.XXX So I tried the following instead: ip route add to 172.16.128.100 .., which obviously not solved the problem. The next problem is the compression. The windows doesn't use a compression, but 'compression_algorithm none;' doesn't work with my racoon. So the current value is 'compression_algorithm deflate;' So my current result looks like this: When I am trying to ping the windows host (ping 172.16.128.100), I receive the following error message from ping: ping: sendmsg: Operation not permitted And racoon logs: racoon: ERROR: failed to get sainfo. After googling for a while I came to no conclusion, what's the solution. Does this error message mean that the first phase of IPsec works? I am thankful for any advice. I guess my configs might be helpful. My racoon.conf looks like this: path pre_shared_key "/etc/racoon/psk.txt"; remote YYY.YYY.YYY.YYY { exchange_mode main; proposal { lifetime time 8 hour; encryption_algorithm 3des; hash_algorithm sha1; authentication_method pre_shared_key; dh_group 2; } } sainfo address XXX.XXX.XXX.XXX/32 any address 172.16.128.100/32 any { pfs_group 2; lifetime time 8 hour; encryption_algorithm aes 256; authentication_algorithm hmac_sha1; compression_algorithm deflate; } And my ipsec-tools.conf looks like this: flush; spdflush; spdadd XXX.XXX.XXX.XXX/32 172.16.128.100/32 any -P out ipsec esp/tunnel/XXX.XXX.XXX.XXX-YYY.YYY.YYY.YYY/require; spdadd 172.16.128.100/32 XXX.XXX.XXX.XXX/32 any -P in ipsec esp/tunnel/YYY.YYY.YYY.YYY-XXX.XXX.XXX.XXX/require; If anyone has an advice, that would be awesome. Thanks in Advance. Greets, Michael It was a simple copy-and-paste error in an ip address.

  Read the article

• ntpdate works, but ntpd can't synchronize

  - by dafydd

  This is in RHEL 5.5. First, ntpdate to the remote host works: $ ntpdate XXX.YYY.4.21 24 Oct 16:01:17 ntpdate[5276]: adjust time server XXX.YYY.4.21 offset 0.027291 sec Second, here are the server lines in my /etc/ntp.conf. All restrict lines have been commented out for troubleshooting. server 127.127.1.0 server XXX.YYY.4.21 I execute service ntpd start and check with ntpq: $ ntpq ntpq> peer remote refid st t when poll reach delay offset jitter ============================================================================== *LOCAL(0) .LOCL. 5 l 36 64 377 0.000 0.000 0.001 timeserver.doma .LOCL. 1 u 39 128 377 0.489 51.261 58.975 ntpq> opeer remote local st t when poll reach delay offset disp ============================================================================== *LOCAL(0) 127.0.0.1 5 l 40 64 377 0.000 0.000 0.001 timeserver.doma XXX.YYY.22.169 1 u 43 128 377 0.489 51.261 58.975 XXX.YYY.22.169 is the address of the host I'm working on. A reverse lookup on the IP address in my ntp.conf file validates that the ntpq output is correctly naming the remote server. However, as you can see, it appears to just roll over to my .LOCL. time server. Also, ntptrace just returns the local time server, and ntptrace XXX.YYY.4.21 times out. $ ntptrace localhost.localdomain: stratum 6, offset 0.000000, synch distance 0.948181 $ ntptrace XXX.YYY.4.21 XXX.YYY.4.21: timed out, nothing received ***Request timed out This looks like my ntp daemon is just querying itself. I am thinking about the possibility that the router-I-don't-control between my test network timeserver and the corporate network timeserver is blocking on source port. (I think ntpdate sends on port 123, which gets it around that filter and is why I can't use it while ntpd is running.) I have email in to the network folks to check that. Finally, telnet XXX.YYY.4.21 123 never times out or completes a connection. The questions: What am I missing, here? What else can I check to try to figure out where this connection is failing? Would strace ntptrace XXX.YYY.4.21 show me the source port ntptrace is sending from? I can deconstruct most strace calls, but I can't figure out the location of that datum. If I can't directly examine the gateway router between my test network and the timeserver, how might I build evidence that it's responsible for these disconnections? Alternately, how might I rule it out?

  Read the article

• How to eliminate duplicate nodes bases on values of multiple attributes?

  - by JayRaj

  Hello All, How can I eliminate duplicate nodes based on values of multiple (more than 1) attributes? Also the attribute names are passed as parameters to the stylesheet. Now I am aware of the Muenchian method of grouping that uses a <xsl:key> element. But I came to know that XSLT 1.0 does not allow paramters/variables in <xsl:key>. Is there another method(s) to achieve duplicate nodes removal? It is fine if it not as efficient as the Munechian method. Update from previus question: XML: <data id = "root"> <record id="1" operator1='xxx' operator2='yyy' operator3='zzz'/> <record id="2" operator1='abc' operator2='yyy' operator3='zzz'/> <record id="3" operator1='abc' operator2='yyy' operator3='zzz'/> <record id="4" operator1='xxx' operator2='yyy' operator3='zzz'/> <record id="5" operator1='xxx' operator2='lkj' operator3='tyu'/> <record id="6" operator1='xxx' operator2='yyy' operator3='zzz'/> <record id="7" operator1='abc' operator2='yyy' operator3='zzz'/> <record id="8" operator1='abc' operator2='yyy' operator3='zzz'/> <record id="9" operator1='xxx' operator2='yyy' operator3='zzz'/> <record id="10" operator1='rrr' operator2='yyy' operator3='zzz'/> </data>

  Read the article

• Cisco PIX firewall blocking inbound Exchange email

  - by sumsaricum

  [Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

  Read the article

• "Could not load file or assembly 'XXX.YYY' or one of its dependencies. The system cannot find the file specified."

  - by Niall Collins

  I have a .net visual studio solution with a number of projects (class libraries and a web application). I did some refractoring which moved files between projects, created new projects, deleted ones not being used and renamed some existing projects. The solution builds without an issue but when I run the web application, the following exception occurs: "Could not load file or assembly 'XXX.YYY' or one of its dependencies. The system cannot find the file specified." The project called XXX.YYY which was deleted in the refractoring outputed a dll called XXX.YYY. But this isnt used anywhere in the application. I deleted the web applications obj directory and bin folder and rebuild but it still occurs. Anyone have any ideas when this might be occurring, any tips??

  Read the article

• POST data getting lost: Content Length = 0

  - by Igor K

  I've been trying to find a solution for ages with no success. On our app, customers submit a form and on the next page we process it. Sometimes though the data never arrives. This seems to happen for just a few of our customers. Seems to happen with IE7 and using a proxy. Here's some headers, note the HTTP_VIA: X-REWRITE-URL: /process.asp?r=699743 APPL_MD_PATH: /LM/W3SVC/31555/ROOT APPL_PHYSICAL_PATH: C:\inetpub\vhosts\mysite.com\httpdocs\ AUTH_PASSWORD: AUTH_TYPE: AUTH_USER: CERT_COOKIE: CERT_FLAGS: CERT_ISSUER: CERT_KEYSIZE: CERT_SECRETKEYSIZE: CERT_SERIALNUMBER: CERT_SERVER_ISSUER: CERT_SERVER_SUBJECT: CERT_SUBJECT: CONTENT_LENGTH: 0 CONTENT_TYPE: application/x-www-form-urlencoded GATEWAY_INTERFACE: CGI/1.1 HTTPS: off HTTPS_KEYSIZE: HTTPS_SECRETKEYSIZE: HTTPS_SERVER_ISSUER: HTTPS_SERVER_SUBJECT: INSTANCE_ID: 31555 INSTANCE_META_PATH: /LM/W3SVC/31555 LOCAL_ADDR: XXX.XXX.XXX.XXX LOGON_USER: PATH_INFO: /process.asp PATH_TRANSLATED: C:\inetpub\vhosts\mysite.com\httpdocs\process.asp QUERY_STRING: r=699743 REMOTE_ADDR: YYY.YYY.YYY.YYY REMOTE_HOST: YYY.YYY.YYY.YYY REMOTE_USER: REQUEST_METHOD: POST SCRIPT_NAME: /process.asp SERVER_NAME: www.mysite.com SERVER_PORT: 80 SERVER_PORT_SECURE: 0 SERVER_PROTOCOL: HTTP/1.1 SERVER_SOFTWARE: Microsoft-IIS/7.0 URL: /process.asp HTTP_CONNECTION: Keep-Alive HTTP_PRAGMA: no-cache HTTP_VIA: 1.1 WEBCACHE-2 HTTP_CONTENT_LENGTH: 0 HTTP_CONTENT_TYPE: application/x-www-form-urlencoded HTTP_ACCEPT: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/x-ms-application, application/x-ms-xbap, application/vnd.ms-xpsdocument, application/xaml+xml, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */* HTTP_ACCEPT_LANGUAGE: en-gb HTTP_COOKIE: ASPSESSIONIDQCKSDCTS=FENMPCMDCHEOENGOJPGDGPLN; HTTP_HOST: www.mysite.com HTTP_REFERER: http://www.mysite.com/theform.asp HTTP_USER_AGENT: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022) HTTP_UA_CPU: x86 HTTP_X_REWRITE_URL: /process.asp?r=699743

  Read the article

• pfSense 2.1 OpenVPN client not using tunnelled interface

  - by Brian M. Hunt

  I'm having some trouble getting OpenVPN working on my pfSense box. The issue is quite strange to me. When I have the OpenVPN turned on, only my router is able to connect to the Internet. From the router I can use ping, links, etc., and connections work exactly as expected - through the VPN, with the IP address assigned by my VPN provider (Proxy.sh, incidentally). However, none of the clients on the local network can connect to the Internet. I get timeouts when using ping or a web browser. I can ping my router, and the IP address of the gateway. When I switch the default gateway from the VPN to my ISP's gateway, all works exactly as expected. Here the routing table (netstat -r) when in VPN mode, and a key for it: IPv4 Destination Gateway Flags Refs Use Mtu Netif Expire 0.0.0.0/1 10.XX.X.53 UGS 0 122 1500 ovpnc1 = default 10.XX.X.53 UGS 0 235 1500 ovpnc1 8.8.8.8 10.XX.X.53 UGHS 0 82 1500 ovpnc1 10.XX.X.1/32 10.11.0.53 UGS 0 0 1500 ovpnc1 10.XX.X.53 link#12 UH 0 0 1500 ovpnc1 10.XX.X.54 link#12 UHS 0 0 16384 lo0 ZZ.XX.XXX.0/20 link#1 U 0 83 1500 re0 ZZ.XX.XXX.XXX link#1 UHS 0 0 16384 lo0 127.0.0.1 link#9 UH 0 12 16384 lo0 128.0.0.0/1 10.11.0.53 UGS 0 123 1500 ovpnc1 192.168.1.0/24 link#11 U 0 1434 1500 ue0 192.168.1.1 link#11 UHS 0 0 16384 lo0 YYY.YYY.YYY.YYY/32 ZZ.XX.XXX.1 UGS 0 249 1500 re0 IP addresses 10.XX.X.53/54 - My DHCP-assigned IP address/pair from the VPN provider ZZ.XX.XXX.XXX - My external IP assigned by my ISP YYY.YYY.YYY.YYY - The external IP assigned by the VPN provider Interfaces ovpnc1 - My VPN client interface re0 - My LAN interface ue0 - My WAN interface This looks essentially what I would expect it to be. The default route is through the VPN provider. The VPN address is routed through the ISP-assigned IP address. I am not sure what would be wrong here. So figuring this was a firewall issue, I basically tried enabling all in/out traffic. This did not seem to remedy the problem. Also figuring it could possibly be some client networking issue, I restarted the clients on the LAN. This did not help. I also ran route flush and reset the routes manually. So I am a bit stumped, and would be very grateful for any thoughts on what the problem might be.

  Read the article

• What does this UDP Packet mean ?

  - by asksuperuser

  I'm total newbie at tcp/ip and I was experimenting with Wireshark. What this mean: 1824 578.194204 xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy UDP Source port: 17500 Destination port: 17500 In data I can see that my user pc name is sent (happily it's a generic name): does this mean someone is trying to hack my pc ?

  Read the article

• What does this TCP Packet mean ?

  - by asksuperuser

  I'm total newbie at tcp/ip and I was experimenting with Wireshark. What this mean: 1824 578.194204 xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy UDP Source port: 17500 Destination port: 17500 In data I can see that my user pc name is sent (happily it's a generic name): does this mean someone is trying to hack my pc ?

  Read the article

• Redirecting without change of address in browser address bar

  - by Berny Paul

  I have a different but similar question. I have a dynamic dns account where I map my machine's dynamic IP to an address say, www.xxx.yyy.net Now, I have registered another short domain name say www.yyy.com, the hosting is on a linux server. Now, my machine is actually a webserver which runs .net website which can be accessed by www.xxx.yyy.net I need my homepage(index.php) in my www.yyy.com handle the redirection in a way that the pages to be loaded from www.xxx.yyy.net/.... but it should look in the browser as www.yyy.com/... Is there any way to do this using php?

  Read the article

• Should commit messages be written in present or past tense?

  - by user68759

  So which is it that you think is better and more intuitive? Fixed the XXX bug in YYY Fix the XXX bug in YYY Fixes the XXX bug in YYY Fixing the XXX bug in YYY Please provide your rationales. Note I am asking from your general perspective, meaning you should not try to associate this with your preferred svn/cvs tools or programming languages, but rather think of it as something that should/can be applied to any tools and programming languages.

  Read the article

• PPTP connection fails with errors 800/806

  - by Mark S. Rasmussen

  I've got a client (Server 2008 R2) that won't connect to our production environment PPTP VPN server (Server 2003, running RRAS). The server is behind a firewall that has TCP1723 open as well as GRE. Other clients at our office are able to connect just fine. Our office is behind a Juniper SSG5-Serial firewall, but all outgoing traffic is allowed, and multiple other clients are able to connect to VPN servers without issues. I've also setup a completely different VPN server on another network outside of our office. The functioning clients connect just fine - the Server 2008 R2 machine doesn't. Thus it's definitely a problem with this machine in particular. I've rebooted it. I've disabled the firewall, no dice on either. I've run PPTPSRV and PPTPCLNT on the server/client and they're able to communicate perfectly - indicating there's no problem using neither TCP1723 nor GRE. The Server 2008 R2 machine is also running as a VPN server itself (incoming connection) and that's working perfectly. We have the issues no matter if there are active incoming connections or not. I'm not sure what my next debugging step would be; any suggestions? EDIT: The event log on the server has the following warning from RasMan: A connection between the VPN server and the VPN client xxx.xxx.xxx.xxx has been established, but the VPN connection cannot be completed. The most common cause for this is that a firewall or router between the VPN server and the VPN client is not configured to allow Generic Routing Encapsulation (GRE) packets (protocol 47). Verify that the firewalls and routers between your VPN server and the Internet allow GRE packets. Make sure the firewalls and routers on the user's network are also configured to allow GRE packets. If the problem persists, have the user contact the Internet service provider (ISP) to determine whether the ISP might be blocking GRE packets. Obviously this points to GRE being a potential problem. But seeing as I have other clients connectiong without problems, as well as PPTPSRV and PPTPCLNT being able to communicate, I'm suspecting this might be a red herring. EDIT: Here are the anonymized events logged by the client in chronological order: CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has started dialing a VPN connection using a per-user connection profile named ZZZ. The connection settings are: Dial-in User = XXX\YYY VpnStrategy = PPTP DataEncryption = Require PrerequisiteEntry = AutoLogon = No UseRasCredentials = Yes Authentication Type = CHAP/MS-CHAPv2 Ipv4DefaultGateway = No Ipv4AddressAssignment = By Server Ipv4DNSServerAssignment = By Server Ipv6DefaultGateway = Yes Ipv6AddressAssignment = By Server Ipv6DNSServerAssignment = By Server IpDnsFlags = Register primary domain suffix IpNBTEnabled = Yes UseFlags = Private Connection ConnectOnWinlogon = No. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY is trying to establish a link to the Remote Access Server for the connection named ZZZ using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has successfully established a link to the Remote Access Server using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The link to the Remote Access Server has been established by user XXX\YYY. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY dialed a connection named ZZZ which has failed. The error code returned on failure is 806. Running Wireshark on the client shows it trying and retrying to send a "71 Configuration Request" While the server shows the incoming client requests, but apparently without replying: Given that this is GRE traffic, I think rules out the GRE traffic being blocked. Question is, why doesn't the server reply? This is the Configuration Request the server receives from the non functioning client (meaning no response is sent to the client request): And this is the Configuration Request the server receives from the working client: To me they seem identical, except for differing keys and magic numbers, and the fact that one client receives a response while the other doesn't.

  Read the article

• nmake.exe: is there a way to exclude a file from a set of files specified in a macro?

  - by Cheeso

  I'm looking for something like the Exclude filter for msbuild, but I Want it in a makefile processed by nmake. Is that possible? Suppose I have a makefile that defines this macro: SOURCES=xxx.c yyy.c zzz.c and I invoke it with nmake OLD=xxx.c NEW=bbb.c ...can I produce, within the makefile, a macro with a value like: yyy.c zzz.c bbb.c ...basically substituting bbb.c for xxx.c ? The files can appear in any order. This would be pretty easy if the string substitution that is possible in nmake macros, allowed for evaluation of macros. In other words, I can do sources=xxx.c yyy.c zzz.c objs=$(sources:.c=.o) and the value of $(objs) is xxx.o yyy.o zzz.o But nmake does not allow a macro for the value of either argument to that substitution. I cannot do this: new=.o sources=xxx.c yyy.c zzz.c objs=$(sources:.c=$(new))

  Read the article

• Can't access IIS 7 server URL from the same IIS 7 server.

  - by Kevin Raffay

  We have an intranet site ie, xxx.yyyy.com, that users access by entering "http"://xxx.yyy.com. Our problems started when we migrated to IIS 7 running on a new 2003 server. We got rid of our single-sign on code and implemented a security model where we capture a user's domain credentials which we then authenticate against a DB. In order to get the domain credentials passed to our ASP.NET app, we have the following settings: Anonymous Authentication:Disabled ASP.NET Impersonation: Enabled Basic/Digest/Forms Authentication: Disabled Windows Authentication: Enabled We allow "*" and deny "?" in the web.config. Browsing "http"://xxx.yyy.com from any client PC results in a domain login prompt, and if your enter a proper user/pwd, you can get in. However, browsing "http"://xxx.yyy.com while remoting into the server results in 3 domain login prompts and eventually a 401 error - unauthorized. We have traced this behavior to problems with our web site where we have pages doing "screen scraping" using the HttpRequest calling a url on the same server. When doing a HttpRequest from any other client, using a test harness that passes authorized credentials, all is good. So internal HttpRequest calls on the server fail, just like attempts to browse that server's url from within a remote session. Why would a to "http"://xxx.yyy.com on server xxx.yyy.com fail authentication?

  Read the article

• How to access apache behind home router?

  - by Filip

  Hi! I have public IP 89.103.xxx.yyy, then router and home network with 192.168.1.zz My router is set to portforward every 8056 on ip adress 192.168.1.5 (my PC), where apache is running. Apache listen is set to: Listen 127.0.0.1:80 Listen 192.168.1.5:8056 When i try: Listen 89.103.xxx.yyy:8056 I get message "unexpected end of apache" (I'm using easyphp for windows). Added: When i try to access 89.103.xxx.yyy via browser, it's prompting router request for authorization to access router web-settings. And when i try 89.103.xxx.yyy:8056, browser says that connection timed out =(

  Read the article

• Tell postfix to merge three Authentication-Results:-Lines into one?

  - by Peter

  I am running a postfix mta with debian wheezy. I am using postfix-policyd-spf-python, openkdim and opendmarc. When receiving e-mails from google (google apps with own domain) for example, the header looks like this: [...] Authentication-Results: mail.xx.de; dkim=pass reason="1024-bit key; insecure key" header.d=yyy.com [email protected] header.b=OswLe0N+; dkim-adsp=pass; dkim-atps=neutral<br> [...] Authentication-Results: mail.xx.de; spf=pass (sender SPF authorized) smtp.mailfrom=yyy.com (client-ip=2a00:1450:400c:c00::242; helo=mail-wg0-x242.google.com; [email protected]; [email protected]) [...] Authentication-Results: mail.xx.de; dmarc=pass header.from=yyy.com<br> [...] This means any of these programs creates it's own Authentication-Results:-Line. Is it possible to tell postfix to merge this into one single Authentication-Results:-Line? When I send an e-mail to google, it says: [...] Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates xxx.xxx.xxx.xxx as permitted sender) [email protected]; dkim=pass [email protected]; dmarc=pass (p=NONE dis=NONE) header.from=xxx.com [...] And this is exactly what I want. Just one Authentication-Results-Header. How can I do this? Thanks. Regards, Peter

  Read the article

1 2 3 4 5 6 7 8  | Next Page >