Drobo Pros won't mount via iSCSI

Posted by niklassaers on Server Fault See other posts from Server Fault or by niklassaers
Published on 2010-04-02T18:42:25Z Indexed on 2010/04/02 18:43 UTC
Read the original article Hit count: 673

Filed under:

drobo

|

iscsi

|

macosxserver

|

macosx

Hi guys,

I've got an Xserve where I've configured a Drobo Pro. Connected via firewire and USB, it works fine, but when connected to a separate network port, it doesn't mount. I've got the Drobo Pro configured to 2.0.1.2/255.255.0.0 and the network port to 2.0.0.1/255.255.0.0. I can ping the IP of the Drobo Pro just fine. I've installed Drobo Dashboard 1.6.8.

Cheers

Nik

© Server Fault or respective owner

Related posts about drobo

Debugging a Drobo that chokes Windows 7x64 When Plugged In

as seen on Super User - Search for 'Super User'
I've had a love hate relationship with my Drobo for a long time. After two years of using it on a Linux box, I moved it over to a Windows 7 machine where it seemed to work just fine for a long time, but it was under very light usage. Mainly backups that never actually happened. Recently I began… >>> More
Drobo Pros won't mount via iSCSI

as seen on Server Fault - Search for 'Server Fault'
Hi guys, I've got an Xserve where I've configured a Drobo Pro. Connected via firewire and USB, it works fine, but when connected to a separate network port, it doesn't mount. I've got the Drobo Pro configured to 2.0.1.2/255.255.0.0 and the network port to 2.0.0.1/255.255.0.0. I can ping the IP of… >>> More
Drobo FS vs. MacBook Pro: Finder works, Drobo Dashboard doesn't

as seen on Super User - Search for 'Super User'
Does anyone have any experience with the new Drobo FS, specifically using it from a MacBook Pro? My experience thus far is this: Set up the Drobo Dashboard software (hereinafter called simply 'Dashboard') on my WinXP machine, which is hard-wired to the network to do the data migration from my NAS-that's-being-replaced… >>> More
Can I use plain RAID on a Drobo?

as seen on Super User - Search for 'Super User'
I'm thinking about a RAID device and the Drobo is on top of my list (followed by the WD ShareSpace). But I don't want to be in another walled garden with Drobos BeyondRAID technology. Can I use the Drobo with a plain RAID setup? So I can take my HDDs and connect it to another RAID controller and… >>> More
Files on ext4 on Drobo with corrupt, zero-ed out blocks

as seen on Server Fault - Search for 'Server Fault'
I have a 2TB ext4 file system (Ubuntu running Linux kernel 2.6.31-22-server x86_64). This file system is the second drive on a Drobo box plugged in via USB. We've not had problems on the first drive (Drobo limits drive size to 2TB due to some OS limitations, so if you have more space than that it… >>> More

Related posts about iscsi

Removing an iSCSI Target - iSCSI initiator 2.0 on Windows Server 2003 R2

as seen on Server Fault - Search for 'Server Fault'
For the life of me I cannot figure out how to remove an iSCSI target (Dell Equallogic SAN) from a Windows Server 2003 box. The volume shows up in Windows as drive letter Y:\ Using the iSCSI initiator, I can remove the Target Portal, but cannot remove the Target itself. Can someone give me some… >>> More
AIX: iscsi volumes disappear after reboot

as seen on Server Fault - Search for 'Server Fault'
We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet… >>> More
How to connect SAN from CentOS through two iSCSI Targets

as seen on Server Fault - Search for 'Server Fault'
I had asked the similar question before. This time I want to use subnet for two iSCSI Targets, hence I start a new question. I have an old Promise VTrak M500i SAN Server. It comes with 2 iSCSI ports. I want to connect to two LUNs on the SAN server through two separate Targets from CentOS 5.7 64bits… >>> More
Can single ESXi host make use of two separete iSCSI box?

as seen on Server Fault - Search for 'Server Fault'
Hi! I have problem with using multiply iSCSI targets with single ESXi host (in my case they are two FreeNAS hosts, but I suspect that this problem will occur with any two iSCSI box of that same type/model). If I configure two FreeNAS hosts as iSCSI targets (say iSCSI A and iSCSI B), then I can use… >>> More
Problems with 2 ISCSI connections esxi 3.5

as seen on Server Fault - Search for 'Server Fault'
I am running a dell poweredge 1950 with 4 nic cards. 1 is bonded to SAN #1 on 192.168.90.xx. The second SAN is on a separate network - 192.168.7.xx The network adapter can view the ip range of the san and the NIC can be pinged from 192.168.7.xx range. vswitch1 and vswitch2 are configured identically… >>> More