Two subnets on one switch with no VLAN and possible problems

Posted by casey_miller on Super User See other posts from Super User or by casey_miller
Published on 2012-04-02T22:54:39Z Indexed on 2012/04/02 23:33 UTC
Read the original article Hit count: 312

Filed under:

subnet

|

vlan

As far as I know in order to use two subnets on one physical cable VLAN's are recommended.

However, is it possible to achieve this (i.e: two subnets on one physical network)

like 192.168.1.0/24 and 10.0.0.0/8 networks.

What kind of problems or hidden rocks this way contains?

With VLAN's it's possible to better isolate so users wouldn't easly sniff the other network. But in my environment it's okay if user on one subnet could listen to the traffic on another network. Is it the only problem?

© Super User or respective owner

Related posts about subnet

Can I subnet a subnet?

as seen on Server Fault - Search for 'Server Fault'
Apologies in advance for the botched terminology. I have read the Server Fault Subnet Wiki but this is more of an ISP question. I currently have a /27 block of public IPs. I use give my router the first address in this pool and then use 1-to-1 NAT for all the servers behind the firewall, so that… >>> More
Connecting to a remote server through OpenVPN when local network subnet conflicts with remote network's subnet

as seen on Server Fault - Search for 'Server Fault'
After connecting to a remote location via OpenVPN, I am trying to access a server on a network that exists on a subnet such as 10.0.1.0/24. However, the network I am trying to access this remote server from is on the same subnet: 10.0.1.0/24. I am unable to connect to my remote server via typing… >>> More
How to Route Traffic in Case PPTP Remote Client is on Same Subnet as Server

as seen on Server Fault - Search for 'Server Fault'
I've a PPTP server setup on my local home network (192.168.1.0/24, pfSense). Now sometimes when I'm away and want to connect remotely my client (Windows 7) is also on the same network because e.g. the hotel has set it up the same way. Thus the connection works, but I can't reach any PC on my home… >>> More
Changing subnet-mask of class-c network host to 255.255.0.0

as seen on Server Fault - Search for 'Server Fault'
We have a existing class-c network with IP address range 11.22.33.44/24 (just for example). My domain controller has been configured within this subnet. So all servers within this subnet have subnet mask configured to 255.255.255.0. Now we have got a new subnet with IP address 11.22.88.99/24 (note… >>> More
Issues resolving DNS entries for multi-homed servers

as seen on Server Fault - Search for 'Server Fault'
This is difficult to explain, so bear with me. We have 2 domain controllers, each multi-homed to straddle 2 internal subnets, (subnet A and subnet B) and provide dns, dhcp, and ldap authentication. Both domain controllers each have 2 DNS entries. both entries have identical host names, but correspond… >>> More

Related posts about vlan

Cisco vlan entry missing in vlan.dat, but appears in running-config

as seen on Server Fault - Search for 'Server Fault'
One of our vlan's (ID: 104) stopped working suddenly and computers on that vlan failed when trying to obtain a dhcp ip address. On the Cisco switch if we do show vlan, this command is supposed to shows the vlans in the vlan.dat file. We notice it has every other vlan except the one that is now missing… >>> More
Unable to access VLAN host from VLAN interface in CentOS

as seen on Server Fault - Search for 'Server Fault'
I am playing with VLAN (Virtual LAN) configuration on CentOS 6.4. I have 2 interfaces, eth0 and eth1. I have configured 2 VLAN interfaces eth0.20 and eth0.30 as #file: ifcfg-eth0.20 #------------- VLAN=yes DEVICE=eth0.20 TYPE=Ethernet ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=static IPADDR=192.168… >>> More
Multiple vlans access to shared pbx system

as seen on Server Fault - Search for 'Server Fault'
I'm new to networking and was looking for some assistance. First off I'm using packet tracer to diagram my scenario as I will be receiving my equipment next week to deploy. Hardware to be used: 2 catalyst 3560 switches all connect to a sonic wall router I have two companies that work in the… >>> More
VLAN ID 4095 for guest VLAN tagging

as seen on Server Fault - Search for 'Server Fault'
Just want to know if it's true that if you use the VLAN ID 4095 for guest VLAN tagging, then vMotion will not work correctly as there is nowhere to pass back the reverse arp to? So, the problem we have noticed is when we have vmotioned VM's that are tagged on our trunk network, you cannot ping them… >>> More
vlan change via scvmm not working

as seen on Server Fault - Search for 'Server Fault'
Hi i have a windows 2008 R2 hyper-v server which is managed via scvmm 2008 R2. the guest os running on the hyper-v server is winxp with sp3. if i change the vlan id via scvmm the guest doesn't get an ip via dhcp i looked in the properties of the vm with the hyper-v mmc an see the vlan changed correctly… >>> More