Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

Posted by Name on Server Fault See other posts from Server Fault or by Name
Published on 2012-11-29T09:09:17Z Indexed on 2012/11/29 11:09 UTC
Read the original article Hit count: 150

Filed under:

cisco

|

dhcp

|

wireless

On our Cisco WLAN Controller web interfaces, in Controller > Interfaces, I have made a new interface with these settings:

VLAN Identifier 202

IP Address 172.16.202.1

Netmask 255.255.255.0

Gateway 172.16.202.254

Primary DHCP Server 172.16.100.3

Secondary DHCP Server 172.16.100.2

Port: LAG

I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices.

We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine.

If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

© Server Fault or respective owner

Related posts about cisco

Cisco Unifed Communication integration for Microsoft Lync crashes on Remote Desktop services 2008 R2!

as seen on Server Fault - Search for 'Server Fault'
Hi everybody i have deployed office communication server 2007 R2 and communicator 2007 R2 and i made integration with Cisco Unified Communication Manager 7.1 in my network, i also uses Remote Desktop Servers 2008 R2 for Thin Client Computers, now that i installed Cisco UC integration client for communicator… >>> More
Cisco Unified Communication integration for Microsoft Lync crashes on Remote Desktop services 2008 R2!

as seen on Server Fault - Search for 'Server Fault'
Hi everybody i have deployed office communication server 2007 R2 and communicator 2007 R2 and i made integration with Cisco Unified Communication Manager 7.1 in my network, i also use Remote Desktop Servers 2008 R2 for Thin Client Computers, now that i installed Cisco UC integration client for communicator… >>> More
Cisco Prime NCS not starting

as seen on Server Fault - Search for 'Server Fault'
I have received the Cisco Prime OVA file and which we placed onto an Oracle virtual environment. We turn the VM on and the CLI boots, When we try to start the NCS service we get errors. HOSTNAME/USER# ncs start Starting Network Control System... Exception in thread "main" java.lang.NullPointerException … >>> More
how to set port forwarding on a cisco 881 router (with cisco configuration professional)

as seen on Super User - Search for 'Super User'
I recently got a cisco 881 router for work and I have everything working except port forwarding I want to forward all incoming port 80 requests to 10.10.10.60 and all incoming port 53322 requests to 10.10.10.40 im using cisco configuration professional and im not sure where to find this option thanks… >>> More
Cisco: Site-to-site VPN with cisco 878 and ASA weirdness

as seen on Server Fault - Search for 'Server Fault'
I currently have 2 sites, both connected to each other through 2 firewalls / routers in a site-to-site VPN. Pinging from server to server (Using 2mb/2mb SDSL) through that VPN obviously works, however, at one site, we have another internet connection (7m/400k ADSL), and only the link between the two… >>> More

Related posts about dhcp

nokia cell phone not accepting IP from dnsmasq dhcp server

as seen on Server Fault - Search for 'Server Fault'
Hello, I having problem connecting a NOkia cell phone to my home wifi network. The wifi network is provided by a wireless card in a machine running Debian Testing and 2.6.26-2-686 kernel. The cars is D-Link DWL-G520 working in ap mode and has WPA encryption enabled. The wireless network is provided… >>> More
dhcp-snooping option 82 drops valid dhcp requests on 2610 series Procurve switches

as seen on Server Fault - Search for 'Server Fault'
We are slowly starting to implement dhcp-snooping on our HP ProCurve 2610 series switches, all running the R.11.72 firmware. I'm seeing some strange behavior where dhcp-request or dhcp-renew packets are dropped when originating from "downstream" switches due "untrusted relay information from client"… >>> More
Windows Vista DHCP bug, arp authorize, isc dhcp, workaround

as seen on Server Fault - Search for 'Server Fault'
I am trying to find a workaround for the Windows Vista Force Broadcast bug with ISC DHCP and a Cisco Router. The problem is not windows vista trying to obtain an IP address from us that works fine (with or without the flag enabled). THe problem is we are using a cisco router and the command 'arp… >>> More
DHCP Relay V DHCP Local Cisco v 3com

as seen on Server Fault - Search for 'Server Fault'
Howdy, I have a client who has a WAN with 7 sites. At one site in particular, randomly about 4-5 clients do not get an IP address. The local gateway is a cisco 871 and relay's to a windows server in a Data Center running a valid scope for the subnet. If I put in a cisco 1800 and configure a dhcp… >>> More
DHCP Relay V DHCP Local Cisoc v 3com

as seen on Server Fault - Search for 'Server Fault'
Howdy, I have a client who has a WAN with 7 sites. At one site in particular, randomly about 4-5 clients do not get an IP address. The local gateway is a cisco 871 and relay's to a windows server in a Data Center running a valid scope for the subnet. If I put in a cisco 1800 and configure a dhcp… >>> More