Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendation?

Posted by prs563 on Server Fault See other posts from Server Fault or by prs563
Published on 2010-04-13T17:29:34Z Indexed on 2012/12/10 17:06 UTC
Read the original article Hit count: 268

Filed under:

hardware-raid

|

raid10

|

serveraid

|

serveraid8k

We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card?

IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability.

Manufacturer    IBM
Manufacturer Part # 25R8064
Cost Central Item # 10025907
Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E
Device Type Storage controller (zero-channel RAID) - plug-in module
Buffer Size 256 MB
Supported Devices   Disk array (RAID)
Max Storage Devices Qty 8
RAID Level  RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E
Manufacturer Warranty   1 year warranty

© Server Fault or respective owner

Related posts about hardware-raid

Hardware Raid Card Reviews with SSDs

as seen on Super User - Search for 'Super User'
Yes I realize there are several questions about this but none of them seem to have the answer I'm looking for. I have two SSDs and am looking to buy a purely hardware raid card for them; however, I can't seem to find any reviews that have specifically tested hardware raid cards with SSDs rather than… >>> More
Well supported Hardware Raid Controller

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
Hello alltogether I am currently planning to buy a hardware-raid controller. This became necessary since I am running Linux and Windows in parallel and now need the redundancy for both OS (Im am going to use RAID1 / Mirroring). Therefore I am searching for a hardware raid controller which is well… >>> More
Recommended motherboard with hardware raid for Linux

as seen on Server Fault - Search for 'Server Fault'
Hi. We want to setup an internal office server for testing jobs (LAMP), email and samba. Only about 5-10 users. We are also considering starting to virtualize, initially by a base Ubuntu Server with Xen or VMWare Open Source server. Our current system runs with a Linux Raid which has worked great… >>> More
Hardware RAID Controller Support for SSD TRIM

as seen on Server Fault - Search for 'Server Fault'
Do any hardware RAID controllers available today support TRIM? If not, do any manufacturers have target dates for supporting TRIM? Should I even care about TRIM for SSDs installed in performance-sensitive workstations? Before you suggest it, yes software RAID would sidestep the issue, but my requirements… >>> More
Ubuntu: Monitor hardware RAID and notify upon failure?

as seen on Server Fault - Search for 'Server Fault'
I am using the 3ware 9650SE-2LP Raid controller for a 2-drive RAID 1 setup in some new Ubuntu 10.04 x64 servers. Is there a way for the server to send me a notification when one of the drives fails? I would prefer an e-mail if possible. Thanks. >>> More

Related posts about raid10

EBS+RAID10+XFS slower than EBS+RAID10+EXT3 using MySQL?

as seen on Server Fault - Search for 'Server Fault'
We're currently using EC2 with 16 EBS volumes in RAID10 configuration for our MySQL data. I know some people don't recommend to put EBS volumes to RAID but that's not what I'm concerned about at the moment. Current format is ext3, but we're experimenting with moving to xfs, given many reports that… >>> More
Can't re-mount existing RAID10 on Ubuntu

as seen on Server Fault - Search for 'Server Fault'
I saw similar questions, but didn't find what solution to my problem. After power-cut, one of RAID10 (4 disks were) appears to be malfunctioning. I make tha array active one, but can not mount it. Always the same error: mount: you must specify the filesystem type So, here is what I have when type … >>> More
Converting software RAID1 to RAID10 for /boot

as seen on Server Fault - Search for 'Server Fault'
Array info: /dev/md0 - /dev/sda1 and /dev/sdb1 /dev/md2 - /dev/sda2 and /dev/sdb2 Partition info: /boot - /dev/md0 / - /dev/md1 I have two drives that are setup as RAID1 using software RAID on Redhat. I added two additional drives (same size) and I would like to conver the RAID1 to a RAID10… >>> More
Windows Server 2008 RAID10

as seen on Server Fault - Search for 'Server Fault'
Hello All, I am building a storage system for myself. I have a 16 bay SATA chasis and right now I have 1 x 500GB SATA for booting 8 x 1.5TB for data. 3Ware 9500S-8 RAID card where these 8 drives above are connected to. I am used to linux, but not in the RAID department. I have Windows experience… >>> More
explain md's raid10,f2

as seen on Server Fault - Search for 'Server Fault'
I know how most of the various RAID's work. But I stumbled on the recommended raid10,f2 mode while researching linux software raid. I don't really understand how it works on 2 or 3 disks. could someone explain it to me? or point me to a really good article that explains it? >>> More