(if anyone knows correct terminology please correct).

Ive got a (fairly large) number of existing Ethernet cables that over the years many have got damaged connector clips, so got a crimp tool and some new connectors for them. However out of all 4 attempts I have tried, on crimping 2+ of the little copper contacts that bite into the wires have instead just bent to one side, and so gone between the gaps in in the crimp tool...

Unless this really is me doing something wrong (what?) I am inclined to blame the hardware, but is this the crimper or the new connectors I got? I tried to take a picture, as you can just about see looking from the left 3rd, 6th, 7th and 8th pins didn't get pushed in, and so don't form a connector. Unfortunately my camera was barely able to focus on it and then this website converted it to a JPEG...

Update: Connectors/Cable/Tools:
The wires are stranded (looks about 6 and no evidence of being aluminum/not copper), and the pins(?) have 2 little flat spikes lengthways along the cables (I understand to dig into it, while solid core connectors would have like 2 plates designed to go around the core?). Crimper was http://www.amazon.co.uk/gp/product/B0013EXTKK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 (seemed to be highly rated, I already had tools for cutting/stripping).

Update2: Picture of crimp "prongs" (?)

Update3: Side picture of connector

Update4: Comparison with old connector.

The top (used) connector is one from a few years back (different tool and connectors), the thing that concerns me that it might not be the tool I need to replace is just how thin the pins are on the new one that maybe a tool could legitimately bend some into a gap rather than pushing them in fully? In fact I can move individual pins to the sides significantly with my fingernail, is that normal?