Daily Archives

Articles indexed Thursday February 3 2011

Page 1/12 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• License name in startup in Visual studio 2010

  - by anirudha

  Whenever we install Visual studio in our system. we found that Express edition and visual studio never show our name in startup by default they show Microsoft. here is a way to change them with your name or organization name if you want. HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion go their and check the value for RegisteredOrganization for changing orgranization name in bottom of username or change the RegisteredOwner for changing the name of user.

  Read the article

• How to log the actual output in apache?

  - by Oscar Rodriguez

  I am doing LAMP development for a mobile platform. However, the client browser does not allow me to view the source code of visited pages. I consider the source code to be of huge importance for debugging, so I would like to configure my web server so every time a user makes a request, in addition to sending the client a response, that response (the actual contents of the returned page) is also stored in a file with a filename I can cross-relate with access_log (maybe ip-timestamp-filename? or maybe a unique ID in an additional column in access_log?). I've searched quite a bit, but haven't even gotten close to finding what I'm looking for. Has anybody been able to do this?

  Read the article

• Software for analyzing IIS logs?

  - by AngryHacker

  I have a ton of IIS monthly logs. Can someone recommend software that can help me analyze them (e.g. visitors, os/browser statistics, all the standard stuff)? I'd like a piece of software that does not require me to setup a server or anything complicated. Simply point it to a file or folder and it'll do the rest. Back in the day (90s) there was something like that, but I can't find it now. Thanks

  Read the article

• How do I calculate the amount of tuning needed for my server ?

  - by Low Kian Seong

  I have a server which is running a few discrete Python, Java application which most of the time imports data into a PostGreSQL database. I would like to know from people out there who have experience tuning enterprise grade servers how do i go about calculating in a holistic way the amount of tuning needed for my server for example vm.swappiness, vm.overcommit_ratio and other numerical tunings needed for my server. I tried to enable sar on my server to capture daily numbers but these are more along the lines of total numbers and I can't figure out how to allocate memory for my applications. Help would be appreciated. Thanks.

  Read the article

• What's required to configure Ubuntu to use a specific DNS server?

  - by ks78

  I've setup two Amazon EC2 instances, both running Ubuntu Server. One is configured as a DNS server running bind9, which will be used to allow EC2 instances to communicate with each other based on hostname rather than IP, since their private IPs may change. I think I have the DNS server setup correctly. I want to use the second EC2 instance to test the DNS server. Using Webmin, I've added the DNS server's private IP to the client's DNS Servers list and added the domain to the Search Domains list. I did have to edit /etc/dhcp3/dhclint.conf to make my changes stick. After reboot, I expected I'd be able to ping or nslookup the DNS server from the test client, but it can't seem to find the server. Is there something I'm missing? What's required to configure an Ubuntu client to use a DNS server? I just want to make sure I'm not missing something before I assume the server's the problem.

  Read the article

• Migrating a virtual domain controller for DR exercise

  - by Dips

  Hello gurus, I have a question. I have a requirement where I have a virtual domain controller and I have to migrate it to another virtual server in a different location. It is for test purposes to test out a DR scenario and the test will be deemed successful if the users that authenticate using the production DC can do so in the backup DC. I don't know much about this and thus don't know why it was assigned to me. So any assistance will be greatly appreciated. What I had in mind was: 1) Taking a snapshot of the production server and then restoring it in the other server. But I was told that this is not the suggested way of doing it. I was not told why. Is that right?If a snapshot is to be taken then what is the best way to do it. Any ideas on where I can get the documentation for this? 2) Another way would be to build the test DC from ground up, match it to the specs of production DC and then perform the DR test. Is this a better option? What will be needed to perform such an activity? Where can I find documentation on that? I apologise for the length of this query. As I said I am quite a novice and hope to get a better resolution. Any assistance will be greatly appreciated. Regards,

  Read the article

• How to allow users to monitor performance of a set of servers without touching every server?

  - by Jon Seigel

  I'm not a sysadmin, so this may be trivial. We have about 20 Windows Server 2008 R2 VMs we want to monitor centrally using Perfmon. The only issue is that the user account that's going to be doing the monitoring is not (and I assume will never be) in the Administrators group. The servers, and the user account (currently one, but could be more) are all on the same domain. Right now we're running a pilot with 5 of the servers, touching each VM manually to set the permissions, which is already getting cumbersome to manage. If we decide to roll this out to all the servers, we need a scalable solution to control access. What is the most flexible way to accomplish this? I'd like a solution that would work with 200 servers just as easily as the 20 servers we have now.

  Read the article

• Massive Network Upgrade

  - by Cliff Racer

  I find myself tasked with organizing an upgrade of our entire Active Directory from server 2003 to 2008. We run a few AD dependant services such as Exchange 2007 SQL Server 2008 SharePoint 2007 All of which we are looking to bring up to date as well with their most recent versions. The original AD was a little bit of a mess (the exchange upgrade from 2003 left some stuff in the AD database that I make references to servers that no longer exist for example). Here is what I want to accomplish Migrate the domain from our 2003 to a NEW clean 2008r2 domain Upgrade from Sharepoint 2007 to 2010 Upgrade Exchange from 2007 to 2010 My question is, in what order do we do things? Can I do a domain upgrade and simply migrate exchange after? On their own, these objectives are complicated enough, orchestrating them in our company while minimizing downtime is making my head spin. I have done a lot of the research on how to do them individually but I am having trouble figuring out how to do them all in concert.

  Read the article

• HTTP not working EC2 instance with own domain name

  - by bogdanvursu

  I have this problem I've already posted on the Amazon AWS forum. Unfortunately I haven't got a clear answer I and I was hoping you guys could help. Here's the link: http://developer.amazonwebservices.com/connect/thread.jspa?messageID=198238#198207 Basically I don't know why after associating an Elastic IP address and mapping it to one of my domains, FTP an ping work fine, but HTTP does a 302 redirect to the Amazon AWS hostname I had before associating the Elastic IP address. Here's the question from the AWS forum: I have an EC2 instance with HTTP and FTP installed. They both worked. Then I associated an Elastic IP address to that instance. Then I mapped that IP address to a name which is a subdomain of a domain I own. I think it's an A name (I didn't do the mapping personally). Now FTP works and HTTP doesn't. The AWS host name before the Elastic IP association: ec2-184-73-27-8.compute-1.amazonaws.com The AWS IP address and host name after the association: 174.129.7.254 and ec2-174-129-7-254.compute-1.amazonaws.com The domain which is mapped to 174.129.7.254 using an A record is: demo.flashxml.net FTP works means that I can connect to both 174.129.7.254, ec2-174-129-7-254.compute-1.amazonaws.com and demo.flashxml.net. HTTP doesn't work means that a HTTP request to 174.129.7.254, ec2-174-129-7-254.compute-1.amazonaws.com or demo.flashxml.net returns a 302 redirect to ec2-184-73-27-8.compute-1.amazonaws.com Here is my VirtualHost file: <VirtualHost *:80> DocumentRoot /home/ec2-user/public_html/wordpress ServerName demo.flashxml.net ErrorLog logs/ec2-user-error_log <Directory /home/ec2-user/public_html/wordpress> AllowOverride FileInfo Order Deny,Allow Allow from All </Directory> </VirtualHost> I finally figured out what was wrong. It's the fact that I installed Wordpress on the server using the hostname provided by Amazon. After associating the Elastic IP and updating the DNS records, the server was reachable - FTP working was the proof of that. The 302 redirect when accessing via HTTP was caused by Wordpress's hostname settings. So, what I've learned from all this was that I should setup my IP and DNS first and only after that install Wordpress or any other web app(s).

  Read the article

• Hosting a javascript api file for third party sites the way sharethis, uservoice, analytics do it.

  - by Dayson

  I'm preparing to launch a service soon which will provide third party websites a widget. The widget requires my javascript file in the website's code. Exactly the same way services like analytics, uservoice, sharethis, getclicky, etc provide you with a javascript snippet to add to your page. Therefore, my javascript file is going to be hotlinked by tons of websites which possibly receive a lot of requests too. I need advice/opinions on the following aspects: What's the right location for hosting this file? Should I use a sub-domain for it? I was thinking of something like http://api.myservice.com/js/foo.js . Remember, once websites start embedding this file, its location CANNOT change under any circumstances. Right now we can afford just one dedicated server. So I have minified my file, enabled gzip and plan to use some good cache control headers through apache. Also, in the near future when the requests pickup, I will use a http proxy like Varnish. Is this a good plan for the near future? Should I be considering a CDN in the future (since we can't afford it now)? If so how do I make sure we're prepared to migrate to it without breaking services. Pros/Cons of moving just this file to a CDN? Also, since its just one javascript file(50kb), any affordable CDN so we could consider it in the beginning itself? Any other word of advice I could use? Anything I shouldn't overlook at this stage which I would regret later? (both in terms of server + javascript ajax limitations) Thanks in advance.

  Read the article

• What does %st mean in top?

  - by Ben

  Here is an example from my top: Cpu(s): 6.0%us, 3.0%sy, 0.0%ni, 78.7%id, 0.0%wa, 0.0%hi, 0.3%si, 12.0%st I am trying to figure out the significance of the %st field. I read that it means steal cpu and it represents time spent by the hypervisor, but I want to know what that actually means to me. Does it mean I may be on a busy physical server and someone else is using too much CPU on the server and they are taking from my VM? If I am using EBS could it be related to handling EBS I/O at the hypervisor level? Is it related to things running on my VM or is it completely unaffected by me?

  Read the article

• Does NMBD depend on DHCP?

  - by Atilla Filiz

  I am trying to debug a SMB share issue on an embedded Linux setup. Before diving into source code, I want to make sure this is not a configuration problem. So here is my case: Scenario-1: dhcp server enabled by default 1- system boots 2- udhcpcd server starts 3- smb server starts (smbd) 4- nmb server starts (nmbd) 5- smb share accessible Scenario-2: dhcp server disabled by default 1- system boots 2- smbd starts 3- nmbd fails to start 4- smb share inaccessible 5- $/etc/init.d/udhcpcd start 6- $/usr/sbin/nmbd still fails without an error message The client pc and the server device have static IP addresses in both cases. Is it possible that, NMBD somehow depends on a DHCP server at start?

  Read the article

• Cisco SR520w FE - WAN Port Stops Working

  - by Mike Hanley

  I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

  Read the article

• Reverse proxy with SSL and IP passthrough?

  - by Paul

  Turns out that the IP of a much-needed new website is blocked from inside our organization's network for reasons that will take weeks to fix. In the meantime, could we set up a reverse proxy on an Internet-based server which will forward SSL traffic and perhaps client IPs to the external site? Load will be light. No need to terminate SSL on the proxy. We may be able to poison DNS so original URL can work. How do I learn if I need URL rewriting? Squid/apache/nginx/something else? Setup would be fastest on Win 2000, but other OSes are OK if that would help. Simple and quick are good since it's a temporary solution. Thanks for your thoughts!

  Read the article

• os x 10.4 server enable mail for account via terminal

  - by Chris

  Hello- I have an account on an OS X 10.4 server that I don't have physical access to (must use SSH). For arguments sake, let's call the account 'Bob'. Bob's account exists and appears to be fully functional, however he does not have email. How do I enable, via terminal, email for Bob's account, such that he can receive email at [email protected]? I already have the mail server all set up with several working accounts in it, I just need to add Bob. I have searched all over Google for over six hours now, but can't seem to find an answer that fits my situation. Any help is appreciated. P.S. - I am not adverse to just deleting the account and starting over, if that would make things easier...

  Read the article

• How to set root public folder permissions in Exchange 2010.

  - by DanieL

  I am currently running Exchange Server 2010 on Windows Server 2008 R2. I have a user that I would like to be able to create/delete public folders in the root public folder. How do I give this user permission to do this? So far I have tried adding the user to the Public Folder Management, Domain Admins, and Administrators groups, and running the following scripts in the powershell: Add-PublicFolderAdministrativePermission -Identity "\" -User "Username" -AccessRights AllExtendedRights -InheritanceType SelfAndChildren This appears to have done something, but the user still cannot create public folders in the root public folder. AddUsersToPFRecursive.ps1 -toppublicfolder \ -User "Username" -Permissions Owner This gives me an access denied error. Any ideas?

  Read the article

• Linksys SRW248g4p and hp procurves

  - by Garfield81

  We've got about 3 procurves linked up with about 5 linksys srw248g4p. Pinging between the Procurves I get ping time between 1-2 ms and pinging between the linksys the ping time are averaging 40 ms. I have evening tried pinging between two linksys switches that are connected to each other directly using the GB ports. There have no modification done to the switches and the firmware seems to be uptodate. Any suggestions would be appreciated.

  Read the article

• router - Problem Sharing internet connection in my router

  - by luis velasco

  Hi we are 4 roomates at the university but I have a problem. One of my roomies is downloading torrents all the time. When somebody need make a call or doing something like you tube or a quiz using the internet conection. The internet is very slow.... I can not create a network using a computer as a proxy. I just need a good router (and in the budget no more than $50).. I just want to split 16MB. In a separated 4 x 4 mb (theoretically)..

  Read the article

• Extract reply to addresses from all emails in an outlook folder

  - by RodH257

  I've got to send a bulk email out to a bunch of people in reply to emails they sent me. I've got all the original emails stored in a single outlook folder. I want to extract all of the reply-to addresses from the emails in that folder so I can send an email to all of them. http://thetechieguy.wordpress.com/2008/04/22/extracting-email-address-from-outlook-2007-folder/ shows you how to export the FROM address of these emails, however a large amount of them came from a web service that sends emails 'on behalf of' the person I'm trying to mail to. So I need the reply-to address, and the export wizard doesn't do that. Does anyone have a tip on how to do this? This is Outlook 2007 on Exchange 2010.

  Read the article

• FreeNX is very unresponsive compare to VNC when using over LAN

  - by Phuong Nguyen

  I find FreeNX is quite unresponsive compare to VNC when using over LAN. I run Netbeans inside a Quad Core Server and remote desktop to it through both NX & VNC. For VNC, the screen will be nicely updated as I scroll the Netbean IDE For FreeNX, flickering happened and the mouse cursor become unresponsive as I tried to do the samething. Have anyone encountered the same? I don't like VNC because when VNC doesnot correctly understand the "Windows" key (interpreted as Super L instead of Mod) Is there any adjustment that can avoid that annoyance? I have tried both FreeNX-Server and NeatX-Server and both resulted in the same unresponsiveness.

  Read the article

• How to recover a file using the FAT cluster chain instead of using the stored length in the FAT table?

  - by cadrian

  I'm trying to recover movie files from my TNT receiver hard drive but it corrupts its FAT32 allocation table (crappy cheap device...) Using dosfsck is useless because the correct file length is the cluster length, not the (shorter) one in the table, and dosfsck only proposes to shorten the file, which I won't do. Question: how to recover a file using the FAT cluster chain instead of using the stored length in the FAT table? Edit I forgot to say: Linux solutions only please (I have no windows box)

  Read the article

• Macbook shuts down when battery is empty (should have went to sleep)

  - by the_great_monkey

  In the past few weeks, my macbook shuts down when the battery dies. The battery does not even die at 0%, sometimes it shuts down at 5% or 10% remaining. I tried calibrating the baterry following this website: http://support.apple.com/kb/HT1490. But it does not really help. I regularly use battery in my macbook, I'd say I use around 2-3 cycles a week. My charge cycles is 440 cycles, and my current battery capacity is 3400mAh from the original 4100mAh. I have 2008 unibody Macbook. Does anyone know how to make it goes to sleep before the battery's dead? EDIT: The OS seems the think that the battery is ok...

  Read the article

• Find and free disk space that is unused but unavailable (due to file system error, etc.)

  - by Voyagerfan5761

  Sometimes I get the feeling that if an app such as μTorrent allocates files on my FAT32-formatted flash drive, but then is killed or crashes (as happens more than a few times a month), that space just disappears from my file system. Whether or not that is the case, sometimes I do get a chill from wondering if I've lost hundreds of MB in available storage due to carelessness or malfunctions. Checking my disk with WinDirStat just makes it worse, because I see the huge "<Unknown>" item at the disk root staring at me, eating up well over a gigabyte. It might be FS inefficiency (due to 32 or 64kb sector/cluster size and a lot of tiny files) or it might be a glitch... Is there a tool I can download and run to check my file system and make sure that there aren't any unused allocated blocks on the disk? I want to make sure I'm not losing any disk space to I/O errors, etc.

  Read the article

• How to change radius of rounded rectangle in Photoshop

  - by MattDiPasquale

  At this point, I'm thinking of just using CSS 3, esp. since I'm a programmer, but I'd like to do this with Photoshop because I think it's nicer since I'm working with images anyway, among other reasons... Before I move on, my first question is: Is there a place like SuperUser for designers (or for Photoshop-like or questions)? What I Want: I want the icons on http://www.mattdipasquale.com/ to look like those on http://about.me/mattdipasquale. About.me has an outdated Twitter icon and does not have icons for GitHub, StackOverflow, etc. So, although I like the look of their icons, I want to be able to create these icons myself instead of using their versions. What I Have: I have different iphone icons, like the Facebook iPhone icon, Twitter iPhone icon, etc., that I got from iTunes, using Firebug to find the URL of the background image. I opened them up in Photoshop and pressed option + command + i to reduce the image size to 32px x 32px with Bicubic Sharper (best for reduction). I now have a square icon layer. Closing the Gap: In addition to the icon layer, I want to have a clipping-mask layer that will apply the 5px rounded-corners, 1px stroke, and 1px bevel. (Note: I just want to apply effects to the edges of the icon because the gloss and other effects are already encoded in the iTunes image. Also, I'm just guessing about the pixel values, but I want it to look good, like the icons on about.me.) What settings should I use for the blend options to make the icons look good, like iphone icons or those used by about.me? Why a Clipping Mask? The reason I want to use a clipping mask is that I want ease of reproducibility. I want to be able to apply the same styling to other square icon layers by simply replacing the square icon layer and then saving for web. If there is a better way to achieve such ease of reproducibility, please suggest it. I've seen Photoshop iPhone icon templates, but I couldn't figure out how to use them with my own images. Thanks! Matt

  Read the article

• MySpace est officiellement à vendre, mais quelle firme pourrait bien vouloir le racheter ?

  MySpace est officiellement à vendre, mais quelle firme pourrait bien vouloir le racheter ? Tout à une fin, et il semble bien que MySpace puisse en faire bientôt l'expérience. Le réseau social qui était autrefois leader, s'est vu balayé d'un revers de la main par l'arrivée de Facebook, vers lequel la majorité de ses abonnés ont migré. En 2005, c'était News Corporation (qui appartient à Rupert Murdoch), qui avait racheté le site à prix d'or (580 millions de dollars !). Depuis, sa relance est un échec et la dégringolade continue. Le groupe de presse a donc décidé de s'en séparer, et lui cherche désormais un nouveau propriétaire. "Avec un nouvel accent mis sur les contenus et une nouvelle structure, nous pens...

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >