Daily Archives

Articles indexed Sunday November 13 2011

Page 1/12 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Ubuntu software stack to mimic Active Directory auth

    - by WickedGrey
    I'm going to have an Ubuntu 11.10 box in a customer's data center running a custom webapp. The customer will not have ssh access to the box, but will need authentication and authorization to access the webapp. The customer needs to have the option of either pointing the webapp at something that we've installed locally on the machine, or to use an Active Directory server that they have. I plan on using a standard "users belong to groups; groups have sets of permissions; the webapp requires certain permissions to respond" auth setup. What software stack can I install locally that will allow an easy switch to and from an Active Directory server, while keeping the configuration as simple as possible (both for me and the end customer)? I would like to use as much off-the-shelf software for this as possible; I do not want to be in the business of keeping user passwords secure. I could see handling the user/group/permission relationships myself if there is not a good out-of-the-box solution (but that seems highly unlikely). I will accept answers in the form of links to "here is what you need" pages, but not "here is what Kerberos does" unless that page also tells me if it's required for my use case (essentially, I know that AD can speak Kerberos, but I can't tell if I need it to, or if I can just use LDAP, or...).

    Read the article

  • OpenSSL x509 Purpose flag "Any Purpose" What is this?

    - by Nick
    Looking at the details of a certificate using the following: openssl x509 -noout -text -purpose -in mycert.pem I find a bunch of purpose flags (which I've discovered are set by the various extensions attached to a certificate). One of these purpose flags is "Any Purpose". I can't seem to find ANY documentation on this flag and why or why not it is set. Do any of you know where I can find more information on this purpose and what it means? Thanks,

    Read the article

  • how can i figure out iis7 memory leak from this dump result?

    - by Cenk Erdem
    my application sometimes starts to eat too much memory in a few seconds then crashes, i used debugdiag to take a dump when this happened, in the analyse i see lots of memory allocations all of them has the same information and each of them allocates 128mb. they look like this: Address 0x00000000`aff41798 Allocation Time 06:56:06 since tracking started Allocation Size 128.00 MBytes Function Source Destination LeakTrack+186cf clr!CExecutionEngine::ClrVirtualAlloc+3c clr!ClrVirtualAlloc+3c clr!WKS::virtual_alloc+42 clr!WKS::gc_heap::get_segment+a2 clr!WKS::gc_heap::get_large_segment+204 clr!WKS::gc_heap::loh_get_new_seg+78 clr! ?? ::FNODOBFM::`string'+a008a clr!WKS::gc_heap::try_allocate_more_space+31b clr!WKS::gc_heap::allocate_more_space+26 clr!WKS::gc_heap::allocate_large_object+6a clr!WKS::GCHeap::Alloc+b5 clr!FramedAllocateString+b06 mscorlib_ni+39f5fd mscorlib_ni+389f83 System_Xml_ni+451adc System_Data_SqlXml_ni+2275d4 System_Data_SqlXml_ni+233f32 System_Data_SqlXml_ni+8ec28 System_Data_SqlXml_ni+8eb65 System_Web_ni+2882b2 System_Web_ni+2794b6 System_Web_ni+2794b6 0x7FF002474BC what can be wrong about my code? any suggestions?

    Read the article

  • How do I provide dpkg configuration parameters to aptitude or apt-get?

    - by troutwine
    When installing gitolite I find that: # aptitude install gitolite The following NEW packages will be installed: gitolite 0 packages upgraded, 1 newly installed, 0 to remove and 29 not upgraded. Need to get 114 kB of archives. After unpacking 348 kB will be used. Get:1 http://security.debian.org/ squeeze/updates/main gitolite all 1.5.4-2+squeeze1 [114 kB] Fetched 114 kB in 0s (202 kB/s) Preconfiguring packages ... Selecting previously deselected package gitolite. (Reading database ... 30593 files and directories currently installed.) Unpacking gitolite (from .../gitolite_1.5.4-2+squeeze1_all.deb) ... Setting up gitolite (1.5.4-2+squeeze1) ... No adminkey given - not initializing gitolite in /var/lib/gitolite. The last line is of interest to me. If I run dpkg-reconfigure -plow gitolite I am presented with a dialog and can modify: the system user name for gitolite, the location of the gitolite repositories and provide the admin pubkey. I'd prefer to use the git system user and provide the admin pubkey on installation, say something of the sort: # aptitude install gitolite --user git --admin-pubkey 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAACAQDAc7kCAi2WkvqpAL1fK1sIw6xjpatJ+Ms2nrwLJPhdovEY3MPZF7mtH+rv1CHFDn66fLGiWevOFp...' That, of course, doesn't work. Can something similar be done? How do I determine the configuration parameters ahead of time? This would be remarkably useful, for instance, when installing gitolite automatically, via puppet or chef.

    Read the article

  • Remote Scripted Installation of Sun/Oracle JRE

    - by chrisbunney
    I'm attempting to automate the installation of a Debian server (debian 6.0 squeeze 64bit). Part of the installation requires the Sun JRE package to be installed. This package has a licence agreement, which has to be accepted. I have a script which uses the following lines to accept and install the JRE: echo "sun-java6-bin shared/accepted-sun-dlj-v1-1 boolean true" | debconf-set-selections apt-get install -y sun-java6-jre This works fine when executing the script locally. However, I need to execute the script remotely using the ssh command, e.g.: ssh -i keyFile [email protected] './myScript' This doesn't work. In particular, it fails on apt-get install -y sun-java6-jre. It would seem that in spite of me setting the licence agreement to accepted, when run remotely in this manner it is ignored. Despite setting the value to true, I still get prompted to manually accept the agreement when I run this command: ssh -i keyFile [email protected] 'apt-get install -y sun-java6-jre' I suspect it is something to do with environment that is taken care of when running a proper terminal session, but have no idea what to try next to fix it. So, what do I have to do to get this command (and hence my deployment script) to run correctly when executing it remotely? Or is there an alternative way that allows me to install the JRE remotely by another means? Edit 0: I have compared the output of env when executed remotely via ssh and when executed via a local terminal session. The only difference between the outputs is that the local terminal session has the additional value TERM=xterm.

    Read the article

  • Unable to set nginx to serve my staging website

    - by user100778
    I'm having some troubles setting up nginx to serve my staging website. What I did is change the server_name but for some reasons it just doesn't work. The url scheme is "domain.foo" is production, "staging.domain.foo" is staging, "foobar.domain.foo" is a web service, "foobar.staging.domain.foo" is the staging version of the same webserver, ".domain.foo" is routed to serve some s3 static HTML, ".staging.domain.foo" is routed to serve some s3 static HTML in another bucket. All production urls work and are correctly configured, all staging urls doesn't work. Here is my conf file. You will see some duplication, I will gladly accept any correction/optimization, I'm a coder and configuring servers is definitely not my thing (but I'm eager to learn and improve...). server { listen 80; ## listen for ipv4 server_name "domain.foo" "www.domain.foo" default_server; access_log /var/log/nginx/access.log; client_max_body_size 5M; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; location ~* \.(jpg|jpeg|gif|png|ico|css|bmp|js|html)$ { access_log off; expires max; root /home/foo/Foo/current/public; break; } if ($host ~ 'www.domain.foo') { rewrite ^/(.*)$ http://domain/foo/$1 permanent; } proxy_pass http://production; break; } } server { listen 80; server_name "staging.domain.foo"; access_log /var/log/nginx/access.staging.log; error_log /var/log/nginx/error.staging.log; client_max_body_size 5M; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://staging; break; } } server { listen 80; ## listen for ipv4 server_name "foobar.domain.foo"; access_log /var/log/nginx/access.log; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if ($host = 'foobar.domain.foo') { proxy_pass http://foobar; break; } } } server { listen 80; ## listen for ipv4 server_name foobar.staging.domain.foo; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://foobar_staging; break; } } server { listen 80; server_name "~^(.+)\.domain\.foo$"; location / { proxy_intercept_errors on; error_page 404 = http://domain.foo/404; set $subdomain $1; rewrite /$ "/$subdomain/index.html" break; rewrite ^ /$subdomain$request_uri? break; proxy_pass http://bucket.domain.foo.s3.amazonaws.com; } } server { listen 80; server_name "~^(.+)\.staging\.domain\.foo$"; location / { proxy_intercept_errors on; set $subdomain $1; rewrite /$ "/$subdomain/index.html" break; rewrite ^ /$subdomain$request_uri? break; proxy_pass http://bucket.staging.domain.foo.s3.amazonaws.com; } } upstream production { server 111.255.111.110:8000; server 111.255.111.110:8001; server 111.255.111.110:8002; server 111.255.111.110:8003; } upstream staging { server 222.255.222.222:8000; server 222.255.222.222:8001; } upstream foobar { server 111.255.222.165:9000; server 111.255.222.165:9001; server 111.255.222.165:9002; } upstream foobar_staging { server 222.255.222.222:9000; } What happens now when I point my browser to staging.domain.foo is that it hangs. Can't find anything in the logs, but for example the access.staging.log and errors.staging.log are created. Anybody has an idea? :)

    Read the article

  • Is quoted-printable enough to make a mail compliant with the line-length-restriction posed in RFC 2822?

    - by Mnementh
    In RFC 2822 (defining E-Mail) is defined, that no line SHOULD be longer than 78 chars (excluding CRLF) and MUST not longer than 998 characters. With quoted-printable longer lines will be broken into more lines, ending each with a '=' until the real linebreak is reached. Conforms a mail to the standard, if it contains lines longer than 78 (or 998) characters but is encoded with quoted-printable? There are arguments, that this isn't compliant, because the receiving mail-client has longer lines after decoding the quoted-printable message.

    Read the article

  • unable to start wamp server

    - by jayesh
    problem to start wamp server error log is [Sat Nov 12 22:01:00 2011] [notice] Apache/2.2.17 (Win32) PHP/5.3.5 configured -- resuming normal operations [Sat Nov 12 22:01:00 2011] [notice] Server built: Oct 18 2010 01:58:12 [Sat Nov 12 22:01:00 2011] [notice] Parent: Created child process 3228 [Sat Nov 12 22:01:01 2011] [notice] Child 3228: Child process is running [Sat Nov 12 22:01:01 2011] [crit] (OS 10022)An invalid argument was supplied. : Child 3228: setup_inherited_listeners(), WSASocket failed to open the inherited socket. [Sat Nov 12 22:01:01 2011] [crit] Parent: child process exited with status 3 -- Aborting.

    Read the article

  • How can I filter packets from a port monitor?

    - by engineerchuan
    I have some data going from Point A to Point B. I have a SPAN monitor set up to a monitoring device C. To recreate some real world scenarios, I want to filter out all traffic which is a certain type (H.323 VoIP Signaling Packets) so that C sees a subset of the information that is flowing from A to B. What would the easiest way to do this be? I assume I would need a computer with 2 NIC cards and some software to examine each packet and chuck out the H.323 VoIP packets? Thanks!

    Read the article

  • s3cmd fails too many times

    - by alfish
    It used to be my favorite backup transport agent but now I frequently get this result from s3cmd on the very same Ubuntu server/network: [email protected]:/home/backups# s3cmd put bkup.tgz s3://mybucket/ bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 36864 of 2711541519 0% in 1s 20.95 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.00) WARNING: Waiting 3 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 36864 of 2711541519 0% in 1s 23.96 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.01) WARNING: Waiting 6 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 28672 of 2711541519 0% in 1s 18.71 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.05) WARNING: Waiting 9 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 28672 of 2711541519 0% in 1s 18.86 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.25) WARNING: Waiting 12 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 28672 of 2711541519 0% in 1s 15.79 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=1.25) WARNING: Waiting 15 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 12288 of 2711541519 0% in 2s 4.78 kB/s failed ERROR: Upload of 'bkup.tgz' failed too many times. Skipping that file. This happens even for files as small as 100MB, so I suppose it's not a size issue. It also happens when I use put with --acl-private flag (s3cmd version 1.0.1) I appreciate if you suggest some solution or a lightweight alternative to s3cmd. Thanks

    Read the article

  • Libvirt installation - Centos

    - by sethu
    I am currently using Centos 6. I want to use the latest version of libvirt (libvirt 0.9.4). The machine already has libvirt 0.8.1 installed . I did yum remove libvirt to remove the existing libvirt and I compiled 0.9.4 from source using : ./configure --prefix=/ make make install ldconfig /etc/init.d/libvirtd start After the installation is complete, I wanted to use the virsh interface. Once I enter virsh , I get : virsh /lib/libvirt.so.0: version 'LIBVIRT_PRIVATE 0.8.1' not found (required by virsh) Can somone let me know how to solve this issue? Correct me if I am doing something wrong. Thanks a lot ! Sethu

    Read the article

  • Which process is using my NAS?

    - by sethu
    I have a nas connected to my cluster. The NAS holds all our home directories. When I did a set of experiments last week, saving a 1 GB file to the nas took around 30 seconds. If i do the same to a local disk it takes 18 seconds. But when I tried doing the same process today, it takes 150 seconds. I am unsure what is the problem . Can someone help me pointout the issue? Is it possible to find out which process is accessing the NAS or how much NAS bandwidth is getting used ? Thanks for your help. -Sethu

    Read the article

  • SSL connection errors from Apache

    - by Yang
    I'm running a (self-signed) SSL cert site on Apache/2.2.14 on Ubuntu 10.04, but various browsers are giving errors on half the connection attempts. Just now saw this transient error from Chrome: "Error 126 (net::ERR_SSL_BAD_RECORD_MAC_ALERT): Unknown error." Hit refresh and the problem goes away for a while. wget too: $ wget --no-check-certificate https://dev.foo.com/deps/ --2010-09-08 19:30:26-- https://dev.foo.com/deps/ Resolving dev.foo.com... 184.72.53.220 Connecting to dev.foo.com|184.72.53.220|:443... connected. OpenSSL: error:0407006A:rsa routines:RSA_padding_check_PKCS1_type_1:block type is not 01 OpenSSL: error:04067072:rsa routines:RSA_EAY_PUBLIC_DECRYPT:padding check failed OpenSSL: error:1408D07B:SSL routines:SSL3_GET_KEY_EXCHANGE:bad signature Unable to establish SSL connection. Run it right away again and it works: $ wget --no-check-certificate https://dev.foo.com/deps/ --2010-09-08 19:30:29-- https://dev.foo.com/deps/ Resolving dev.foo.com... 184.72.53.220 Connecting to dev.foo.com|184.72.53.220|:443... connected. WARNING: cannot verify dev.foo.com's certificate, issued by `/CN=dev.foo.com': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 3157 (3.1K) [text/html] Saving to: `index.html' 100%[======================================>] 3,157 --.-K/s in 0s 2010-09-08 19:30:29 (48.6 MB/s) - `index.html' saved [3157/3157] In my sites-enabled/default-ssl: SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key The cert: -----BEGIN CERTIFICATE----- MIIBszCCARwCCQCa0TzNwqLgsTANBgkqhkiG9w0BAQUFADAeMRwwGgYDVQQDExNk ZXYucGFydHlvbmRhdGEuY29tMB4XDTEwMDgyNzA2MzA1N1oXDTIwMDgyNDA2MzA1 N1owHjEcMBoGA1UEAxMTZGV2LnBhcnR5b25kYXRhLmNvbTCBnzANBgkqhkiG9w0B AQEFAAOBjQAwgYkCgYEAzXDEULpCUqIc9hV/ESFapkckR2uoYINA81DvG2aQZ9Ot Q30OwX2ae2CC4bSzJEIVlahU8vjVrWpmpa28NEhQbqh4ywwbl1XDrEVYI6Gkfimf snJhOKyaVrEhlwutYtBjmsz3ZIqwymMPm/6smVcSS5dJIynlSmtltxX6ivPcO8UC AwEAATANBgkqhkiG9w0BAQUFAAOBgQBGxHVkpSSOnZjzuySRepjhAlV/yhe9Fx23 fh12WrjQMEi98B7JEuNSLXDWckUN7O6XRc3RzKmazcGHJqzhn0Ov6gAmAE2XjZ/x VW21xmaLwk+KgYKFJbJJaP3jMSpU7I3aa11wqAkR2Zd4Nkm9N0YXYIzcBdfztTVI Et8mEHBFdg== -----END CERTIFICATE----- The cert is in turn generated via: $ make-ssl-cert generate-default-snakeoil --force-overwrite Apache version. $ apache2 -V Server version: Apache/2.2.14 (Ubuntu) Server built: Apr 13 2010 20:22:19 Server's Module Magic Number: 20051115:23 Server loaded: APR 1.3.8, APR-Util 1.3.9 Compiled using: APR 1.3.8, APR-Util 1.3.9 Architecture: 64-bit Server MPM: Worker threaded: yes (fixed thread count) forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/worker" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="/etc/apache2/mime.types" -D SERVER_CONFIG_FILE="/etc/apache2/apache2.conf" I don't administer the network, hardware, etc. - this is all running on Amazon EC2. I'm not running a load-balancer or anything else in front of the server. I'm making direct TCP connections to that host (AFAIK). Any ideas? Thanks in advance for any help.

    Read the article

  • Benchmarking a file server

    - by Joel Coel
    I'm working on building a new file server... a simple Windows Server box with a few terabytes of disk space to share on the LAN. Pain for current hard drive prices aside :( -- I would like to get some benchmarks for this device under load compared to our old server. The old server was installed in 2005 and had 5 136GB 10K disks in RAID 5. The new server has 8 1TB disks in two RAID 10 volumes (plus a hot spare for each volume), but they're only 7.2K rpm, and of course with a much larger cache size. I'd like to get an idea of the performance expectations of the new server relative to the old. Where do I get started? I'd like to know both raw potential under different kinds of load for each server, as well an idea of what our real-world load looks like and how it will translate. Will disk load even matter, or will performance be more driven by the network connection? I could probably fumble through some disk i/o and wait counters in performance monitor, but I don't really know what to look for, which counters to watch, or for how long and when. FWIW, I'm expecting a nice improvement because of the benefits of having two different volumes and the better RAID 10 performance vs RAID 5, in spite of using slower disks... but I'd like to get an idea of how much.

    Read the article

  • how to disable remote wipe for Exchange 2010 ActiveSync?

    - by RMNVM
    When connecting android mobile devices to Exchange ActiveSync some require granting device administrator privileges which permit an exchange administrator to remotely wipe the phone. The warning messages are scaring some mobile users and turning them away from using Exchange ActiveSync altogether. How can I disable his functionality on Exchange Server 2010? [security breaches are not an issue here]

    Read the article

  • Cannot read/write FTP directory vsftpd on centos 6.0 (empty folder)

    - by adrianTNT
    I have Centos 6.0 and installed vsftp with YUM, I added a user with Webmin panel, set its home dir to "/var/www/html" and its shell to "/bin/sh", user id is 500, user group is same as name: "adrian_ftp". When I start a ftp program it logs in but the remote folder always shows empty. I set directory owner and group to adrian_ftp:adrian_ftp , no change, I also made them 0777, no change. Any ideas? I tried for over 3-4 hours :|

    Read the article

  • Disk is spinning down each minute, unable to disable it

    - by lzap
    I played with spindown and APM settings of my Samsung discs and now they spin down every minute. I want to disable it, but it seems it does not accept any of the spindown time or APM values. Nothing works, it's all the same. Please help what values should be proper for it. I do not want it to spin down at all. /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG HD154UI Serial Number: S1Y6J1KZ206527 Firmware Revision: 1AG01118 Standards: Used: ATA-8-ACS revision 3b Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 2930277168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 1430799 MBytes device size with M = 1000*1000: 1500301 MBytes (1500 GB) cache/buffer size = unknown Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Media Card Pass-Through * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 326min for SECURITY ERASE UNIT. 326min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50024e900300cca3 NAA : 5 IEEE OUI : 0024e9 Unique ID : 00300cca3 Checksum: correct I have the very same disc which I did not "tuned" and it does not spin. But I do not know where to read the settings from. The hdparm only shows this: Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 Edit: It seems the issue was tuned daemon in RHEL6. It was too aggressive, I turned off disc tuning and it seems they are no longer spinning down.

    Read the article

  • How to know the source of certain TCP traffic on AIX

    - by A.Rashad
    We have two AIX boxes, one for production system and another for testing. both systems are running ATM machine switches, where the ATM device is connected via TCP socket. we had an issue on production system where the machine would power off or get disconnected but the netstat -na | grep <IP of machine > would still mention that the socket is up when simulated that case on the UAT environment, the problem did not happen, where the socket would terminate in 3 to 5 minutes. when sniffed on the traffic between the machine and ATM we found that no traffic takes place on production while there is some sort of heartbeat on UAT. but it is not initiated by the application. $>tcpdump | grep -v "10.2.2.71" | grep -v "HSRP" | grep "10.3.1.30" tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on en6, link-type 1, capture size 96 bytes 09:08:13.323421 IP server073.afs3-callback > 10.3.1.30.impera: . 278204201:278204202(1) ack 3307884029 win 164 09:08:13.335334 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:08:23.425771 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:08:23.425789 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 09:09:13.628985 IP server073.afs3-callback > 10.3.1.30.impera: . 0:1(1) ack 1 win 164 09:09:13.633900 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:09:23.373634 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:09:23.373647 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 while on production, that traffic is not there. we want to know where this traffic is initiated from to implement on production to sense disconnection our comms parameters are: tcp_keepcnt = 2 tcp_keepidle = 100 tcp_keepinit = 150 tcp_keepintvl = 150 tcp_finwait2 = 1200 can anyone help? Editing Question: One point I missed because I was rushing to a meeting. the difference between the Production and UAT in setup is that in Production we have an application called F5 working as load balancer between the ATMs and the AIX box, while it is a direct connection through MPLS in case of UAT. note: we had one MPLS and one GPRS connected ATMs on UAT, and both connections terminated when unplugged in about 4 minutes Edit 2 the no -o tcp_timewait command returns 1 in both Production and UAT

    Read the article

  • Backup and Restore ADAM database

    - by kuoson
    I was trying to backup and restore an ADAM database to a different server the other day. I copied all files under "Program Files/Microsoft ADAM" folder to the same path in the destination server and started the ADAM service in the destination server up. Although the service come back up successfully and I was able to connect to the instance with ADAM ADSI Edit mmc snap-in, I found I had to reset every single user's password before they can login again. Has anyone got this issue before? Is the password encrypted with the server IP address or something like that?

    Read the article

  • What am I (a beginner) losing, by choosing Cherokee over Apache for serving dynamic content?

    - by Bad Learner
    I am a complete beginner and am planning to setup a photo sharing site. This is the setup I am planning, basically for a start - - Cherokee (instead of Apache) for serving dynamic content (python-based application), and Nginx for serving static files. Since, I am a beginner, what have I, to lose? So, can someone, from your experience, please tell me, what I'd lose by choosing Cherokee over Apache for serving dynamic content in PHP/Python/whatever? Anything other than the fact that there's lot of documentation, many people who can help when there's an issue etc as Apache is well established and the most popular web server? Again, my intention is not to spurt a flame war here. Just wanted to know if Cherokee would be better than Apache in terms of performance, reliability, and speed, when it matters (peak load times). Also, I heard it's a lot faster than Apache in serving dynamic content, is it true?

    Read the article

  • Remove automatic Aero disabling in Windows 7

    - by Jani Hartikainen
    Sometimes when I'm playing games which are heavy on the GPU, Windows decides to helpfully disable aero, causing everything to freeze for a bit and in the worst case, combined with ATI's brilliant drivers, causes the game to crash. So, How do I stop Windows from automatically disabling Aero when playing games? It has absolutely no effect on the performance of the game itself when it does that. Also, I'd like to get rid of the "You should disable Aero to improve performance" helpful hint popup which sometimes shows up. But I suppose getting rid of the first will get rid of the second, assuming anyone knows how.

    Read the article

  • This file does not have a program associated with it for performing

    - by Abu Hamzah
    update 2: HKEY_CLASSES_ROOT\folder ContentViewModeLayoutPatternForBrowse REG_SZ delta ContentViewModeForBrowse REG_SZ prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified ContentViewModeLayoutPatternForSearch REG_SZ alpha ContentViewModeForSearch REG_SZ prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay (Default) REG_SZ Folder EditFlags REG_BINARY D2030000 FullDetails REG_SZ prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size NoRecentDocs REG_SZ ThumbnailCutoff REG_DWORD 0x0 TileInfo REG_SZ prop:System.Title;System.ItemTypeText HKEY_CLASSES_ROOT\folder\DefaultIcon (Default) REG_EXPAND_SZ %SystemRoot%\System32\shell32.dll,3 HKEY_CLASSES_ROOT\folder\shell HKEY_CLASSES_ROOT\folder\shell\explore HKEY_CLASSES_ROOT\folder\shell\explore\command HKEY_CLASSES_ROOT\folder\shell\open MultiSelectModel REG_SZ Document HKEY_CLASSES_ROOT\folder\shell\open\command DelegateExecute REG_SZ {11dbb47c-a525-400b-9e80-a54615a090c0} (Default) REG_EXPAND_SZ %SystemRoot%\Explorer.exe HKEY_CLASSES_ROOT\folder\shell\opennewprocess MUIVerb REG_SZ @shell32.dll,-8518 MultiSelectModel REG_SZ Document Extended REG_SZ LaunchExplorerFlags REG_DWORD 0x3 ExplorerHost REG_SZ {ceff45ee-c862-41de-aee2-a022c81eda92} HKEY_CLASSES_ROOT\folder\shell\opennewprocess\command DelegateExecute REG_SZ {11dbb47c-a525-400b-9e80-a54615a090c0} HKEY_CLASSES_ROOT\folder\shell\opennewwindow MUIVerb REG_SZ @shell32.dll,-8517 MultiSelectModel REG_SZ Document OnlyInBrowserWindow REG_SZ LaunchExplorerFlags REG_DWORD 0x1 HKEY_CLASSES_ROOT\folder\shell\opennewwindow\command DelegateExecute REG_SZ {11dbb47c-a525-400b-9e80-a54615a090c0} HKEY_CLASSES_ROOT\folder\ShellEx HKEY_CLASSES_ROOT\folder\ShellEx\ColumnHandlers HKEY_CLASSES_ROOT\folder\ShellEx\ColumnHandlers\{0561EC90-CE54-4f0c-9C55-E226110A740C} (Default) REG_SZ Haali Column Provider HKEY_CLASSES_ROOT\folder\ShellEx\ColumnHandlers\{F9DB5320-233E-11D1-9F84-707F02C10627} (Default) REG_SZ PDF Column Info HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\Adobe.Acrobat.ContextMenu (Default) REG_SZ {D25B2CAB-8A9A-4517-A9B2-CB5F68A5A802} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\BriefcaseMenu (Default) REG_SZ {85BBD920-42A0-1069-A2E4-08002B30309D} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\ESET Smart Security - Context Menu Shell Extension (Default) REG_SZ {B089FE88-FB52-11D3-BDF1-0050DA34150D} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\LavasoftShellExt (Default) REG_SZ {DCE027F7-16A4-4BEE-9BE7-74F80EE3738F} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\Library Location (Default) REG_SZ {3dad6c5d-2167-4cae-9914-f99e41c12cfa} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\MagicISO (Default) REG_SZ {DB85C504-C730-49DD-BEC1-7B39C6103B7A} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\MBAMShlExt (Default) REG_SZ {57CE581A-0CB6-4266-9CA0-19364C90A0B3} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\WinRAR (Default) REG_SZ {B41DB860-8EE4-11D2-9906-E49FADC173CA} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\WS_FTP (Default) REG_SZ {797F3885-5429-11D4-8823-0050DA59922B} HKEY_CLASSES_ROOT\folder\ShellEx\ContextMenuHandlers\XXX Groove GFS Context Menu Handler XXX (Default) REG_SZ {6C467336-8281-4E60-8204-430CED96822D} HKEY_CLASSES_ROOT\folder\ShellEx\DragDropHandlers HKEY_CLASSES_ROOT\folder\ShellEx\DragDropHandlers\WinRAR (Default) REG_SZ {B41DB860-8EE4-11D2-9906-E49FADC173CA} HKEY_CLASSES_ROOT\folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000} (Default) REG_SZ HKEY_CLASSES_ROOT\folder\ShellEx\PropertySheetHandlers HKEY_CLASSES_ROOT\folder\ShellEx\PropertySheetHandlers\BriefcasePage (Default) REG_SZ {85BBD920-42A0-1069-A2E4-08002B30309D} HKEY_CLASSES_ROOT\folder\ShellNew Directory REG_SZ IconPath REG_EXPAND_SZ %SystemRoot%\system32\shell32.dll,3 ItemName REG_SZ @shell32.dll,-30396 MenuText REG_SZ @shell32.dll,-30317 NonLFNFileSpec REG_SZ @shell32.dll,-30319 HKEY_CLASSES_ROOT\folder\ShellNew\Config AllDrives REG_SZ IsFolder REG_SZ NoExtension REG_SZ update: HKEY_CLASSES_ROOT\Directory AlwaysShowExt REG_SZ (Default) REG_SZ File Folder EditFlags REG_BINARY D2010000 FriendlyTypeName REG_SZ @shell32.dll,-10152 FullDetails REG_SZ prop:System.PropGroup.Description;System.DateCreated;System.FileCount;System.TotalFileSize InfoTip REG_SZ prop:System.Comment;System.DateCreated NoRecentDocs REG_SZ PreviewDetails REG_SZ prop:System.DateModified;*System.SharedWith;*System.OfflineAvailability;*System.OfflineStatus PreviewTitle REG_SZ prop:System.ItemNameDisplay;System.ItemTypeText HKEY_CLASSES_ROOT\Directory\Background HKEY_CLASSES_ROOT\Directory\Background\shell HKEY_CLASSES_ROOT\Directory\Background\shell\cmd (Default) REG_SZ @shell32.dll,-8506 Extended REG_SZ NoWorkingDirectory REG_SZ HKEY_CLASSES_ROOT\Directory\Background\shell\cmd\command (Default) REG_SZ cmd.exe /s /k pushd "%V" HKEY_CLASSES_ROOT\Directory\Background\shellex HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\Gadgets (Default) REG_SZ {6B9228DA-9C15-419e-856C-19E768A13BDC} HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\igfxcui (Default) REG_SZ {3AB1675A-CCFF-11D2-8B20-00A0C93CB1F4} HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New (Default) REG_SZ {D969A300-E7FF-11d0-A93B-00A0C90F2719} HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\Sharing (Default) REG_SZ {f81e9010-6ea4-11ce-a7ff-00aa003ca9f6} HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\XXX Groove GFS Context Menu Handler XXX (Default) REG_SZ {6C467336-8281-4E60-8204-430CED96822D} HKEY_CLASSES_ROOT\Directory\DefaultIcon (Default) REG_EWindows Windows XPAND_SZ %SystemRoot%\System32\shell32.dll,3 HKEY_CLASSES_ROOT\Directory\shell (Default) REG_SZ none HKEY_CLASSES_ROOT\Directory\shell\cmd (Default) REG_SZ @shell32.dll,-8506 Extended REG_SZ NoWorkingDirectory REG_SZ HKEY_CLASSES_ROOT\Directory\shell\cmd\command (Default) REG_SZ cmd.exe /s /k pushd "%V" HKEY_CLASSES_ROOT\Directory\shell\find LegacyDisable REG_SZ SuppressionPolicy REG_DWORD 0x80 HKEY_CLASSES_ROOT\Directory\shell\find\command (Default) REG_EWindows Windows XPAND_SZ %SystemRoot%\EWindows Windows XPlorer.exe DelegateExecute REG_SZ {a015411a-f97d-4ef3-8425-8a38d022aebc} HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec (Default) REG_SZ [FindFolder("%l", %I)] NoActivateHandler REG_SZ HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\application (Default) REG_SZ Folders HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\topic (Default) REG_SZ AppProperties HKEY_CLASSES_ROOT\Directory\shell\OneNote.Open (Default) REG_SZ Open as Notebook in OneNote HKEY_CLASSES_ROOT\Directory\shell\OneNote.Open\Command (Default) REG_SZ C:\PROGRA~1\Microsoft Office\Office12\ONENOTE.EXE "%L" HKEY_CLASSES_ROOT\Directory\shellex HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\CuteFTP 8 Professional (Default) REG_SZ {8f7261d0-d2b9-11d2-9909-00605205b24c} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EncryptionMenu (Default) REG_SZ {A470F8CF-A1E8-4f65-8335-227475AA5C46} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\MagicISO (Default) REG_SZ {DB85C504-C730-49DD-BEC1-7B39C6103B7A} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Sharing (Default) REG_SZ {f81e9010-6ea4-11ce-a7ff-00aa003ca9f6} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\ShellExtension HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\WinRAR (Default) REG_SZ {B41DB860-8EE4-11D2-9906-E49FADC173CA} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\XXX Groove GFS Context Menu Handler XXX (Default) REG_SZ {6C467336-8281-4E60-8204-430CED96822D} HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\{596AB062-B4D2-4215-9F74-E9109B0A8153} HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\FileSystem (Default) REG_SZ {217FC9C0-3AEA-1069-A2DB-08002B30309D} HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Sharing (Default) REG_SZ {40dd6e20-7c17-11ce-a804-00aa003ca9f6} HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\WinRAR (Default) REG_SZ {B41DB860-8EE4-11D2-9906-E49FADC173CA} HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\WS_FTP (Default) REG_SZ {1D83C7B3-C931-4850-BED0-D3FE8B3F5808} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\Sharing (Default) REG_SZ {f81e9010-6ea4-11ce-a7ff-00aa003ca9f6} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\{1f2e5c40-9550-11ce-99d2-00aa006e086c} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\{4a7ded0a-ad25-11d0-98a8-0800361b1103} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\{596AB062-B4D2-4215-9F74-E9109B0A8153} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\{ECCDF543-45CC-11CE-B9BF-0080C87CDBA6} HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\{ef43ecfe-2ab9-4632-bf21-58909dd177f0} (Default) REG_SZ I updated my IE9 from IE8 and after I reboot my machine and try to access my computer drive and I get this error message whenever I try to double click c:\ drive or other drives but other than that everything seems to be working fince except that I can not access my drives.... its very strange any help? <<<This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel>>> using Windows 7 32 bit

    Read the article

  • Can compressing Program Files save space *and* give a significant boost to SSD performance?

    - by Christopher Galpin
    Considering solid-state disk space is still an expensive resource, compressing large folders has appeal. Thanks to VirtualStore, could Program Files be a case where it might even improve performance? Discovery In particular I have been reading: SSD and NTFS Compression Speed Increase? Does NTFS compression slow SSD/flash performance? Will somebody benchmark whole disk compression (HD,SSD) please? (may have to scroll up) The first link is particularly dreamy, but maybe head a little too far in the clouds. The third link has this sexy semi-log graph (logarithmic scale!). Quote (with notes): Using highly compressable data (IOmeter), you get at most a 30x performance increase [for reads], and at least a 49x performance DECREASE [for writes]. Assuming I interpreted and clarified that sentence correctly, this single user's benchmark has me incredibly interested. Although write performance tanks wretchedly, read performance still soars. It gave me an idea. Idea: VirtualStore It so happens that thanks to sanity saving security features introduced in Windows Vista, write access to certain folders such as Program Files is virtualized for non-administrator processes. Which means, in normal (non-elevated) usage, a program or game's attempt to write data to its install location in Program Files (which is perhaps a poor location) is redirected to %UserProfile%\AppData\Local\VirtualStore, somewhere entirely different. Thus, to my understanding, writes to Program Files should primarily only occur when installing an application. This makes compressing it not only a huge source of space gain, but also a potential candidate for performance gain. Testing The beginning of this post has me a bit timid, it suggests benchmarking NTFS compression on a whole drive is difficult because turning it off "doesn't decompress the objects". However it seems to me the compact command is perfectly capable of doing so for both drives and individual folders. Could it be only marking them for decompression the next time the OS reads from them? I need to find the answer before I begin my own testing.

    Read the article

  • Vim: change the quick fix title

    - by romeovs
    I'm using following makeprg to get my tex files compiled in vim: setlocal makeprg=pdflatex\ \-file\-line\-error\ \-shell\-escape\ \-interaction=nonstopmode\ $*\\\|\ tee\ \/dev\/tty\ \\\|\ grep\ \-P\ ':\\d{1,5}:\ ' which yields great results (errors displayed properly, tex compilation shown while busy,...) Yet, when there are errors and the quickfix window pops up, its status bar is cluttered up with the makeprg string: pdflatex\ \-file\-line\-error\ \-shell\-escape\ \-interaction=nonstopmode\ $*\\\|\ tee\ \/dev\/tty\ \\\|\ grep\ \-P\ ':\\d{1,5}:\ ' Is there a way of changing the quickfix title/statusbar?

    Read the article

  • How does it hurt to use Linux (Ubuntu) as a guest OS for all my tasks?

    - by sauparna
    I have a machine running Windows, where the disk has two partitions C (50 GB) and D (250GB). I do research in Information Retrieval and need to work with a large corpus (more than 50 GB) and in Linux. So if I want to install Linux on the existing system, keeping the Windows installation intact, will it be fine to run it in a virtual box? (say, QEMU, VMWare, etc.) An alternative is using Wubi. In that case the Linux installation has to be on drive C. Then, if I keep a small Linux installation (say 5GB) on C, and my corpus on D (mounted in Linux), how will it affect the performance of my programs which would be accessing the mounted Windows drive D. Is it feasible to use Linux this way? Which of the above is better if at all they are a way out? Note : Since my post in July 2010, I have been using and have tried several ways of maintaining a disk-image that I can mount in Linux. I had a 100GB qcow2 disk and a 100GB raw disk, both formatted to an EXT3 file system. I was mounting and connecting to the qcow2 disk using qemu-nbd. The problem was that every now and then, the connection to the disk would get lost and the running programs would throw disk I/O errors. The raw disk would mount and work fine as a loop mounted device, but when writing data to it, the mount.ntfs program would hog the CPU and the process would take an enormous amount of time. I was in fact running make on a piece of software located on this raw disk, and after a point of time make was waiting while mount.ntfs would show 100% CPU usage.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >