Daily Archives

Articles indexed Monday June 25 2012

Page 1/16 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Remote RAID Control ESXi Dell PowerEdge 2950 OpenManage

    - by yoyomommy
    I was wondering how one can add a drive into an existing RAID array while ESXi is still running. I have read that you are able to use Dell OpenManage to do this. I have installed OMSA 7.0 on the VMWare ESXi host (5.0 and fully updated) and I've installed OpenManage Essentials on a Windows Server 2008 R2 guest. The issue that I'm having is that OpenManage is unable to see my RAID controller. I have seen videos and photos as parts of guides on how to do this online, so I would assume that the functionality exists and I just have it set up wrong.

    Read the article

  • Group Policy GPO not 'seen' at client

    - by fukawi2
    I have a new OU (natorg.local\NATO\Users) that I am trying to apply GP to. I have created a new user in this OU, and linked the 3 GPO's to this OU: DESKTOP - Folder Redirection (AppData) DESKTOP - Folder Redirection (Desktop) DESKTOP - Folder Redirection (Documents) Hopefully the names are sufficient to suggest what they do exactly. The settings are under User Settings so there is no Loopback processing required (if my understanding is correct). GP Modelling for the user and specific computer says that the GPOs will/should be applied, however on the client, gpresult doesn't even appear to see the GPOs under either "Applied" or "Not Applied": USER SETTINGS -------------- CN=Amir,OU=Users,OU=NATO,DC=natorg,DC=local Last time Group Policy was applied: 25/06/2012 at 11:07:13 AM Group Policy was applied from: svr-addc-01.natorg.local Group Policy slow link threshold: 500 kbps Applied Group Policy Objects ----------------------------- LAPTOPS - Power Settings WSUS - Set Server Address OUTLOOK - Auto Archive SECURITY - Lock Screen After Idle Default Domain Policy DESKTOP - Regional Settings NETWORK - Proxy Configuration NETWORK - IE General Config OFFICE - Trusted Locations OFFICE - Increase Privacy OUTLOOK - Disable Junk Filter DESKTOP - Disable Windows Error Reporting DESKTOP - Hide Language Bar NETWORK - Disable Skype DESKTOP - Disable Thumbs.db Creation WSUS - Set Server Address The following GPOs were not applied because they were filtered out ------------------------------------------------------------------- Local Group Policy Filtering: Not Applied (Empty) NETWORK - Google Chrome Configuration Filtering: Not Applied (Empty) SYSTEM - Event Log Configuration Filtering: Not Applied (Empty) SECURITY - Local Administrator Password Filtering: Not Applied (Empty) NETWORK - Disable Windows Messenger Filtering: Not Applied (Empty) SECURITY - Audit Policy Filtering: Not Applied (Empty) WSUS - Automatic Install Filtering: Not Applied (Empty) NETWORK - Firewall Configuration Filtering: Not Applied (Empty) DESKTOP - Enable Offline Files Filtering: Not Applied (Empty) I haven't altered permissions on the GPO's at all, no WMI filtering... As I said, GP Modelling says that they should be applied. GPResult on the client correctly identifies itself as being the correct OU (CN=Amir,OU=Users,OU=NATO,DC=natorg,DC=local) There are 2 x 2008R2 and a 2003 DC, domain is 2003 level, client is Windows XP SP3. Can anyone suggest why these GP Objects would be "invisible" to the client?

    Read the article

  • Which Apache modules are safe to disable?

    - by Gaia
    Each Apache process is using about 70MB of private/rss memory, so I would like to lean them up a bit. The server runs Magento and Wordpress only. PHP is run as fcgid. Which modules would you consider safe to disable? Loaded Modules: core_module (static) mpm_prefork_module (static) http_module (static) so_module (static) auth_basic_module (shared) auth_digest_module (shared) authn_file_module (shared) authn_alias_module (shared) authn_anon_module (shared) authn_dbm_module (shared) authn_default_module (shared) authz_host_module (shared) authz_user_module (shared) authz_owner_module (shared) authz_groupfile_module (shared) authz_dbm_module (shared) authz_default_module (shared) ldap_module (shared) authnz_ldap_module (shared) include_module (shared) log_config_module (shared) logio_module (shared) env_module (shared) ext_filter_module (shared) mime_magic_module (shared) expires_module (shared) deflate_module (shared) headers_module (shared) usertrack_module (shared) setenvif_module (shared) mime_module (shared) dav_module (shared) status_module (shared) autoindex_module (shared) info_module (shared) dav_fs_module (shared) vhost_alias_module (shared) negotiation_module (shared) dir_module (shared) actions_module (shared) speling_module (shared) userdir_module (shared) alias_module (shared) substitute_module (shared) rewrite_module (shared) proxy_module (shared) proxy_balancer_module (shared) proxy_ftp_module (shared) proxy_http_module (shared) proxy_ajp_module (shared) proxy_connect_module (shared) cache_module (shared) suexec_module (shared) disk_cache_module (shared) cgi_module (shared) version_module (shared) sed_module (shared) security2_module (shared) unique_id_module (shared) fcgid_module (shared) evasive20_module (shared) perl_module (shared) php5_module (shared) ssl_module (shared) dav_svn_module (shared) authz_svn_module (shared)

    Read the article

  • Changed Password Won't seem to work for account

    - by erik
    Bit of an odd problem. I've got a server I can SSH into as one of two logins: root or erik. Once I've logged in as erik I've tried to switch to the root user: # sudo su - root Password: And entered the password. After several failures I thought I might have forgotten. So I SSH'd in as root, and changed the root password: # passwd Now back to the other shell (erik) and attempt to run sudo su - root and again, it won't accept the just changed password. Any ideas?

    Read the article

  • Where should I go to learn about networking? [closed]

    - by Ollie Saunders
    I wonder if anyone could recommend resource or resources such as a good book that: explains how all the important protocols work and interact. I’m interested in those that are relevant in a typical home network and used over the Internet explains in detail how ADSL Internet connections work to the level of depth necessary so that I’m able to tweak and measure performance settings starts from the beginning but attempts to provide proper understanding rather than idiot-oriented steps to follow Basically, I’m interested in how these technologies work and tend to be implemented in hardware and software rather than “here’s what to do if…” I’m interested in Computer Networking by Andrew S. Tanenbaum and I wonder if anyone else has any experience with that title. It’s expensive but I could probably loan a copy for £3 from the library or so.

    Read the article

  • eth0 and eth1 both assigned same IP on boot

    - by Banjer
    I have a physical SLES 11 SP2 server on a Sun Fire x4140 that is giving me problems with networking upon reboot. The NICs are onboard. The networking appears successful during boot, but network services such as nfs fail hard. This is because eth0 and eth1 are both receiving the same configuration and are both ifup-ed. Once everything times out and I'm at the console, ifconfig shows that eth0 and eth1 are UP and running with the same IP. Attempting to ping anything in that subnet fails. Restarting the network service fixes the issue. eth0 is the correct NIC that should be configured as primary, per the MAC address. Question: Whats causing eth1 to be brought up with the same config as eth0?? I do not have a config script set up for eth1: [email protected]:~> ls -la /etc/sysconfig/network/ total 104 drwxr-xr-x 6 root root 4096 Jun 11 12:21 . drwxr-xr-x 6 root root 4096 Apr 10 09:46 .. -rw-r--r-- 1 root root 13916 Apr 10 09:32 config -rw-r--r-- 1 root root 9952 Apr 10 09:36 dhcp -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth0 -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth3 -rw------- 1 root root 172 Feb 1 08:32 ifcfg-lo -rw-r--r-- 1 root root 29333 Feb 1 08:32 ifcfg.template drwxr-xr-x 2 root root 4096 Apr 10 09:32 if-down.d -rw-r--r-- 1 root root 239 Feb 1 08:32 ifroute-lo drwxr-xr-x 2 root root 4096 Apr 10 09:33 if-up.d drwx------ 2 root root 4096 May 5 2010 providers -rw-r--r-- 1 root root 25 Nov 16 2010 routes drwxr-xr-x 2 root root 4096 Apr 10 09:36 scripts On a side note, eth3 is also configured with an IP in a different subnet, but this has not posed any problems. FYI the kernel module being used is forcedeth. [email protected]:~> sudo cat /etc/sysconfig/network/ifcfg-eth0 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.21.64.25/20' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Here's eth3 in case you need to see it: [email protected]:~> sudo cat /etc/sysconfig/network/ifcfg-eth3 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.11.200.4/24' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Perhaps is something related to udev? 70-persistent-net-rules looks OK to me, but I may not understand it completely. [email protected]:~> cat /etc/udev/rules.d/70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4b", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4d", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3" # PCI device 0x1077:0x3032 (qla3xxx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:c1:dd:0e:34:6c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4" Any other thoughts on what would cause this?

    Read the article

  • Default permissions for courier imap folders

    - by JoeCoder
    I'm using courier imap. When a mail client creates a new folder, it's created on the filesystem with 640 permission. I need it to be writable by the group, or 660. I currently have /etc/courier/imapd IMAP_UMASK=007, but that's not enough. I'm not sure what else to try. Any ideas? I'm using ubuntu server 12.04. EDIT: I added a 50pt bounty to this. For an acceptable answer, I need a way to make it work from a package in a standard repo. If I download source and compile it myself, it won't be automatically kept up to date with security fixes. If I don't find a better answer, I'll add code to the admin script to call another sudo approved script to chmod -R the whole directory before every change. But this is kind of hack-ish.

    Read the article

  • MAPS windows 2008 r2 ent vs normal windows 2008 r2 ent edition [closed]

    - by KevinOelen
    Possible Duplicate: Can you help me with my software licensing question? Microsoft action pack subscription(MAPS) offers that many internal use of softwares, especially windows server 2008 R2 Ent 1 license with 10 CALs. Total cost is 329$ But when I looking for microsoft licensing and pricing guide, windows server 2008 r2 ent edition costs 3919$ with 25 cal. Do we really need to buy windows enterprise edition?

    Read the article

  • Amazon EC2 Reserved Instances: "Heavy Utilization" clarification

    - by gravyface
    Should be another easy one here, but I need clarification on what they define as "heavy utilization" for Reserved Instance types. From their Website: Heavy Utilization RIs – Heavy Utilization RIs offer the most absolute savings of any Reserved Instance type. They’re most appropriate for steady-state workloads where you’re willing to commit to always running these instances in exchange for our lowest hourly usage fee. With this RI, you pay a little higher upfront payment than Medium Utilization RIs, a significantly lower hourly usage fee, and you’re charged that lower hourly rate for every hour in the Reserved Instance term you purchase. Using Heavy Utilization RIs, you can save up to 41% for a 1-year term and 58% for a 3-year term vs. running On-Demand Instances. If you’re trying to find a break-even utilization, you’re economically advantaged using Heavy Utilization RIs (vs. On-Demand Instances) if you plan to use your instance more than 43% of a 1-year term or 79% of a 3-year term. I'm assuming that, if I'm planning on running a 24/7 Web Server, then regardless of how many resources I consume (bandwidth, cpu cycles, memory), I would want to go with a Heavy Utilization Reserved Instance? This one Web Server in particular will likely barely budge the cpu, but it needs to be up and running 24/7. Not 100% on what they're defining as "heavy".

    Read the article

  • time sync with ntpd

    - by guthrie
    I run Debian on several systems, and their times do not seem to stay in sync. I can run ntpdate manually, but I thought that I should have an ntpd running that would automate that. I did check with apt and apt-cache but don't find any ntpd (or associated ntpq), not any such names in my system (locate...), but ntp-doc does still describe them. Looking around I see that there is an ntpdate-debian command, and it uses /etc/default/ntpdate for servers (instead of the standard /etc/ntp.conf), but even thought that file is there and has "yes" indicated to use ntp.conf, it fails with "no servers can be used", although ntpdate works fine. Is this just a layer over ntpdate, any reason to use it instead? So, why are they missing, do I need them, how do I automate time updates? Associated, two of my machines are virtualized on a MSoft VM, how is it that their clocks drift, and both to different values? (The underlying Windows machine clock seems stable). I see a few old notes about time & ntp problems on VMware, didn't find anything either current or relating to MSoft VMs. Anything I did see says just to use ntpd, but as above, ...?!

    Read the article

  • proxy: pass request body failed

    - by bux
    I'm trying to enable proxy virtualhost: <VirtualHost *:80> ServerName xxxxx.domain.tdl SSLProxyEngine On SSLProxyCheckPeerCN on ProxyPass / https://localhost:1234 ProxyPassReverse / https://localhost:1234 </VirtualHost> But i've an 500 err and my error.log (apache2) display: [Tue Jan 03 15:41:42 2012] [error] (502)Unknown error 502: proxy: pass request body failed to [::1]:1234 (localhost) [Tue Jan 03 15:41:42 2012] [error] proxy: pass request body failed to [::1]:1234 (localhost) from 82.252.xxx.xx () Missing some parameters ?

    Read the article

  • How to specify file permission when putting a file using OpenSSH sftp command

    - by Adi Roiban
    I am using various SFTP clients for uploading files to an SFTP server and I have a problem with default permission used when putting files. When requesting to put a file, SFTP client like WinSCP or Filezilla will send the SSH_OPEN command without requesting any explicit file permission. On the other side, it looks like the OpenSSH sftp command on Linux (Red Hat and Ubuntu) is pending the SSH_OPEN command together with the '640' mode. How can I configure the OpenSSH command to not explictly set the file mode or how can I configure it to send a mode, other than 640? Many thanks! Update: I checked the OpenSSH sftp client source code and it looks like OpenSSH sftp will always tries to preserve file mode even if -P is not set: http://www.koders.com/c/fidD3B20680F615B33ACCB42398FAAFEE1C007DF942.aspx?s=rsa#L986 To solve this problem I used Putty SFTP client.

    Read the article

  • CloneZilla PXE Boot Without NFS

    - by John
    I am trying to setup CloneZilla to be bootable via PXE without using NFS. I do not have NFS running on our PXE server and would like to keep it that way. However, most of the information that I have found online indicates that you need to setup NFS in order to PXE boot CloneZilla. I believe that I am pretty close in getting it to work, but am not sure where to go next. Listed below are the different PXE menu option configurations that I have used so far. LABEL Clonezilla Live MENU LABEL Clonezilla Live KERNEL utilities/clonezilla/vmlinuz APPEND initrd=utilities/clonezilla/initrd.img boot=live live-config noswap nolocales edd=on nomodeset ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" o$ I have also tried the following append lines, without success: APPEND initrd=utilities/clonezilla/initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=tftp://10.130.155.23/filesystem.squashfs APPEND initrd=utilities/clonezilla/initrd.img boot=live union=aufs noswap noprompt vga=normal nomodeset nosplash fetch=tftp://10.130.155.23/filesystem.squashfs Each of them have resulted in a no go with the following error: "Unable to find a live file system on the network". It looks like it gets to the point of trying to load the filesystem.squashfs file, hangs, and then throws the error. Any help would be greatly appreciated.

    Read the article

  • ssl between balancer members?

    - by jemminger
    I have apache running on one machine as a load balancer: <VirtualHost *:443> ServerName ssl.example.com DocumentRoot /home/example/public SSLEngine on SSLCertificateFile /etc/pki/tls/certs/example.crt SSLCertificateKeyFile /etc/pki/tls/private/example.key <Proxy balancer://myappcluster> BalancerMember http://app1.example.com:12345 route=app1 BalancerMember http://app2.example.com:12345 route=app2 </Proxy> ProxyPass / balancer://myappcluster/ stickysession=_myapp_session ProxyPassReverse / balancer://myappcluster/ </VirtualHost> Note that the balancer takes requests under SSL port 443, but then communicates to the balancer members on a non-ssl port. Is it possible to have the forwarding to the balancer members be under SSL too? If so, is this the best/recommended way? If so, do I have to have another SSL cert for each balancer member? Does the SSLProxyEngine directive have anything to do with this?

    Read the article

  • Can't install SQL Express 2008R2- caspol.exe application error - the application failed to initialize

    - by Nir
    I'm trying to install SQL Server Express 2008 R2 on Windows 2003 Server (enterprise edition). I get the following error message: Title: caspol.exe - Application Error Text: The application failed to initialize properly (0x000007b), Click on OK to terminate the application. I get the same error message both when downloading the installer and running it and when using the web platform installer. All the pages on the internet I've found about similar problem say it's a corrupt .net installation issue - This server runs multiple .net apps and I've never had any problems with any of them. I've uninstalled and reinstalled .net (causing a painful outage) and nothing changed. Does anyone here has any idea what might cause this? Update 1: additional information I forgot to include: 32bit version of Windows running in a virtual machine, no anti virus Update 2: when running caspol.exe from the command line I get the same error

    Read the article

  • What backup solution for Windows 2008 R2 servers on XenServer 5.0?

    - by Niels R.
    A friend of mine is hosting a lot of Linux VM's on his servers using XenServer 5.0. He uses rdiff-backup to make daily backups. I'm trying to convince him to host some Windows VM's (Windows 2008 R2 Web Edition) too, so he could provide (me) .NET hosting. The main problem at the moment is a backup strategy for these Windows VM's. I would like to see something like a weekly full backup (snapshot of the VM?) with daily incrementals. I've looked at Windows Backup, but because the backups are made onto network shares it doesn't provide incrementals (for what I understand). Does anyone has any experience with this situation? How did you solve this in a "not-too-hard-to-install/maintain" way?

    Read the article

  • Count Items in Access 2003

    - by Anna
    I have a table which contains a column with different items which i would like to count by there type. For example the table looks like the following: Id Type 1 Table 2 Table 3 TV 4 TV 5 Table 6 TV 7 TV The result should looks like: Type NumOfItems Table 3 TV 4 I use the following code which doesn't work for my Access 2003: SELECT Table1.Type, Count(Table1.Type) AS NumOfItems FROM Table1

    Read the article

  • DHCP Client Can't Find DHCP Server

    - by leeman24
    I currently have 3 machines: CentOS (router) eth1 - 18.0.168.1 eth2 - 145.165.34.1 Windows Server 2008 (server) 18.0.168.2 DHCP scope - 145.165.34.10 - 145.165.34.20 Windows 7 (client) Supposed to use DHCP I can't get my Windows 7 client to get an address from the Windows Server 2008 DHCP server. Every network interface can ping each other (ex. 18.0.168.2 can ping 18.0.168.1 & 145.165.34.1 and the other way around). My Linux machine acting as the router has default IP tables. Other than this command which may or may not be right: iptables -I INPUT -p udp -d 18.0.168.2 --dport 67:68 -j ACCEPT I have also tried it after I flushed the IP tables. I was looking at the dhcrelay command but it seems CentOS doesn't have it and I am not even sure how to use it.

    Read the article

  • INtegral card readers have drivers installed but do not show on my computer

    - by Santiago Berniz
    I recenlty fixed a computer powerbutton and accidentally unplugged a sd card reader and did not know where was at (didnt knw if it was usb or firewire/ after i found out, i guess i installed it on a different usb so reinstalled the drivers..Drivers show installed successfully, ready to use. but THey do not show up on my computer as removable disks (E:) etc.a s they should I have windows 7 home premium 64 bits. the computer is a Acer Aspire M1201-be50001a. I tried following the installation and they show up while installing and then hide again. Any help is appreciated Thanks in advance.

    Read the article

  • Why would my HDD main partition suddenly become hidden?

    - by Luis Oscar
    A few days ago I was using my computer as usual and I turned it off. The next day it wouldn't boot up. It just stayed after the hardware diagnostic window on the intermittent underscore screen. So clearly It wasn't booting up. I tried turning it on and off a couple of times with no avail. Finally I used windows 7 disk and it seemed as if there was no HDD. not even the installation would see the HDD. So i thought it was dead, i bought a new one installed it with windows and used a external case with the old HDD. plug it in and still couldn't see it. I finally downloaded a partition program EASUS or something and my HDD was there listed WITHOUT a system letter. I could however explore it and i set it as Unhidden and it came back to life. I could see it normally. I really just wish someone could explain to me what happened here, was it a virus? does it means the HDD is about to die? How can i prevent this or what should I do now? should i stop using this OLD HDD? Thanks

    Read the article

  • Why do msi installations use slower drives over faster ones in windows 7?

    - by Joshua C
    I have noticed that the slowest drive in my system is used most during an msi installation. I mainly notice this when running windows updates but it seems to be msi installs in general. The setup I last saw this occur on was running Windows 7 with the following drives: Sata: 240GB SSD NTFS ~515MB/s Operating system drive 1TB NTFS ~110MB/s Firewire: 4TB ExFAT ~80MB/s I would think that windows would choose the fastest drive with available space for temporary files. But it will instead choose the external drive with the slowest transfer speed. I could also understand choosing the 1TB for not being an ssd in an attempt to preserve the longevity of the ssd write capacity. Why does this happen? Is there a way to force these installations to use the OS drive or a specific drive?

    Read the article

  • Cronjob as root?

    - by Rob
    I'm having a bit of a problem with cronjobs for backups. I've set up the following in sudo crontab -e (not under personal account): 0 1 * * * /backups/dobackup /backups/dobackup contains this: #!/bin/sh touch ITRAN tar -cvpjf /backups/$(date +%d.%m.%Y)_backup.tar.bz2 --exclude=/backups --exclude=/proc --exclude=/lost+found --exclude=/sys --exclude=/mnt --exclude=/media --exclude=/dev / The backup file is created, but the file ITRAN is not. Also, the backup file is vastly smaller than expected: -rw-r--r-- 1 rjrudman root 371620259 2012-06-21 12:39 21.06.2012_backup.tar.bz2 -rw-r--r-- 1 rjrudman root 1023211449 2012-06-22 18:00 22.06.2012_backup.tar.bz2 -rw-r--r-- 1 rjrudman root 1512785 2012-06-23 01:00 23.06.2012_backup.tar.bz2 -rw-r--r-- 1 rjrudman root 1023272455 2012-06-24 22:41 24.06.2012_backup.tar.bz2 -rw-r--r-- 1 rjrudman root 1514027 2012-06-25 01:00 25.06.2012_backup.tar.bz2 The backups with much larger file sizes are created by manually running sudo /backups/dobackup. It seems the cronjob is failing at some point.. but I have no idea how to debug this issue or where to start. Any ideas? Running ubuntu 10.04

    Read the article

  • Internet Connection Sharing/FTP issues

    - by SirSkidmore
    I am currently using a Linux Mint desktop along with a Windows 8 netbook running Internet Connection Sharing to my desktop. On my desktop, I can't access FTP sites, but my laptop can, so I think it might be a porting issue. I can ping the server from Mint, so I know it's up and running, but I can't access it via telnet. On my Windows 8 netbook, I have every protocol checked, including FTP. Originally, the FTP server indicated that "Scotty" (my netbook) was hosting the service, so I tried inputting the IP of my router, 192.168.1.1 to no avail. Any ideas?

    Read the article

  • My computer loses network connectivity every 30 minutes

    - by Logan Garland
    My LAN connected PC loses network connectivity every 30 minutes. It has a static IP address and I've checked to make sure there aren't any IP conflicts on my network. If I'm streaming from that PC to my Xbox the stream will be interrupted and it normally takes about a minute to come back online. The same happens if I'm actually on the PC and just browsing the web. I'm looking for suggestions on how to track down this issue. I've tried checking the available logs on my router to see if there is an issue with DCHP but have been unsuccessful in finding any evidence. Any suggestions would be helpful. I can't think of any recent changes to my network, PC or software installations that may have caused this. I am a software developer and have intermediate networking knowledge. EDIT: During one outage I told windows to troubleshoot the network problem and it said that it could automatically fix the problem by changing DCHP info. It basically said my network adapter from static to automatically obtain. This did fix the issue quicker than just waiting it out, but the outage occurred again 30 minutes later even when leaving those settings.

    Read the article

  • Is it possible to show " New Task" of Task Manager from tasks of Task Manager only?

    - by WebMAOhist
    I work on remote Windows Server 2008 machine over RDP and frequently need to revive broken copy&pasting over RDP. Which is killing rdpclip process in Task Manger (tab "Processes") and launching it gain by: switching to tab Applications -- pressing button "New Task..." -- typing 'rdpclip'-- clicking OK. Well, I do not need to type 'rdpclip' if it is the last used command. The problem that in "Create New Task" of Windows Task Manager I always launch rdpclip only but it shows the last run program from Windows command prompt (Win +R), usually it is "notepad" for me. Is it possible to bind the last used command/task to Task Manager only? and how?

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >