Daily Archives

Articles indexed Friday October 5 2012

Page 1/15 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Linux Mint Wireless doesn't connect [migrated]

    - by guisantogui
    I'm having a great problem, I've installed Linux mint debian edition (LMDE), and following this tutorial http://community.linuxmint.com/tutorial/view/161 I did installed the network driver. The available connections appears to me, but when i try to connect to my connection at first time, I got this message: "(4) Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." And the following tries, I got this another message: "(32) Insufficient privileges." I'm accepting ideas. Thanks.

    Read the article

  • What's constitute an entry on the IPTables and how to find out which client it is originated from

    - by cbd
    I have a Billion BiPac 7700N Modem/Router/Access Point and I connect another router (TP-Link TL-WR1043ND) in wan-bypass mode to extend the wireless coverage. Lately, I noticed that the connection through TP-Link has been dropping out quite regularly. Having read some posts on the Internet, I checked system log on 7700N and found that there are many "nf_conntract: expectation table full" errors, which I suppose the iptables are full. My questions: What does constitute an entry on the iptable? Is it a client or a connection (which means one client can have multiple connections) How could I find out where are those connections originated from? Note: Many reported that the issue is usually related to having torrents running but I don't have any torrents running. Thank you.

    Read the article

  • Remote hosts accessing AD's registry

    - by smitty user
    I have a situation here. I have an intrusion detection system and it constantly alerts me that a remote host is accessing our AD's registry remotely. Our remote hosts are mainly Windows XP and our ADs are W2K8. The remote hosts access them over SMB port 445 Is it normal for Windows hosts to access AD's remote registry? My colleagues confirmed with me that both host and AD is clean from virus with endpoint protection enabled. Thanks.

    Read the article

  • Memcached session manager in Azure: Connection gets forcibly closed

    - by Edgar Pérez
    I am using Memcached Session Manager to handle Tomcat sessions in non-sticky mode. My deployment in Azure consists of a Worker Role with two instances which connect to an Azure VM running my Memcached server. Everything works pretty well, my session is persisted and retrieved by any of the two instances transparently. The problem arises when the session is idle for about 4 minutes; everything points out that the Azure Loadbalancer is closing the spymemcached connection to the VM after some period of inactivity. My MSM configuration is this: <Manager className="de.javakaffee.web.msm.MemcachedBackupSessionManager" memcachedNodes="n1:my-azure-vm.cloudapp.net:11211" sticky="false" sessionBackupAsync="false" sessionBackupTimeout="10000" lockingMode="uriPattern:/path1|/path2" requestUriIgnorePattern=".*\.(ico|png|gif|jpg|css|js|ttf|eot|svg|woff)$" transcoderFactoryClass="de.javakaffee.web.msm.serializer.kryo.KryoTranscoderFactory" customConverter="de.javakaffee.web.msm.serializer.kryo.HibernateCollectionsSerializerFactory"/> The stacktrace printed by the spymemcached client is this: INFO net.spy.memcached.MemcachedConnection: Reconnecting due to exception on {QA sa=/10.194.132.206:13000, #Rops=1, #Wops=0, #iq=0, [email protected]da8, topWop=null, toWrite=0, interested=1} java.io.IOException: An existing connection was forcibly closed by the remote host at sun.nio.ch.SocketDispatcher.read0(Native Method) at sun.nio.ch.SocketDispatcher.read(Unknown Source) at sun.nio.ch.IOUtil.readIntoNativeBuffer(Unknown Source) at sun.nio.ch.IOUtil.read(Unknown Source) at sun.nio.ch.SocketChannelImpl.read(Unknown Source) at net.spy.memcached.MemcachedConnection.handleReads (MemcachedConnection.java:303) at net.spy.memcached.MemcachedConnection.handleIO (MemcachedConnection.java:264) at net.spy.memcached.MemcachedConnection.handleIO (MemcachedConnection.java:184) at net.spy.memcached.MemcachedClient.run(MemcachedClient.java:1298) Given this idle time limitation in Azure, is there any other way to make MSM work in the azure cloud?

    Read the article

  • How to convert html textfield/area data to server-side txt file? [closed]

    - by olijake
    How can I make a script that will convert the text/data in a html textfield/textarea and send it to the server, which then saves it as a .txt file for storage? NOTE: I am hosting a website(for testing purposes) using Apache 2.2 on a Windows 7 machine. I downloaded PHP version 5.4.7, but have not yet installed on my server yet (not sure if I will need it, but also not sure how to install it). 1st problem: Saving text to server Html page/section with title textfield, text textarea, and submit button. You would enter a title, the text/notes you need in the textfield, then press the submit button to have it store the text in the textarea, as a .txt file on the server called .txt. 2nd problem: Opening text from server Html with list of all txt files OR textfield for entering in title, then submit button to send the title of the requested .txt file to the server, which would then load it up on the page. Here is what I have so far: (let me know if there is something that I should change or if something just isn't correct in the index.html code I have right now.) <!DOCTYPE HTML> <html> <head> <title>Insert Title</title> <meta http-equiv="Content-Type" content="Text/HTML; charset=UTF-8"/> </head> <body> <form method="post" action="save.INSERT_FILETYPE" name="textfile" enctype="multipart/form-data"> <input type="text" name="title"><br/> <textarea rows="20" cols="100" id="text" name="text"></textarea><br/> <input type="submit" name="submit" value="Submit Text to Server"> </form><br/> <hr style="width: 100%; height: 4px;"><br/> <form method="post" action="open.INSERT_FILETYPE" name="textfile" enctype="multipart/form-data"> <input type="text" name="title"><br/> <input type="submit" name="submit" value="Submit Txt File Request"> </form><br/> <div>Opened text file displays here or goes on another page</div> </body> </html> I plan on using a server side language/script, but ANYTHING that gets the job done is fine. I already tried looking into using some ASP/jScript/PHP, but have had some trouble implementing it into my server. (ie: getting the modules loaded and telling the server what file types to parse.) I know this may be an extremely easy fix, but then in that case, hopefully you wouldn't mind helping me out a little :). If it turns out that this is MUCH more complicated than I expect, then feel free to let me know that, so I don't waste me time running in circles. I appreciate any help/assistance that you can provide, Thanks, Jake EDIT: Wrong Apache version. In response to the comments/closing of this thread: My question: "How exactly do I install the PHP module on the apache server? and is this even possible? and is this even recommended?" ^ In case I wasn't clear enough already To Clarify: I understand the basics of PHP, I just have trouble with INSTALLING PHP on the apache server. (I have used PHP before, but never successfully on apache (so far...)) For my script I wrote something similar to this already (using fopen() and a few other commands): <?php fopen("notes.txt", "r"); file_put_contents("notes.txt",teststring1); ?> I have used javascript for this task before also (although I prefer using PHP and server-side languages): <script language="javascript"> function WriteToFile(){ var fso = new ActiveXObject("Scripting.FileSystemObject"); var s = fso.CreateTextFile("C:\\NewFile.txt", true); var text=document.getElementById("TextArea1").innerText; s.WriteLine(text); s.WriteLine('***********************'); s.Close(); } </script>

    Read the article

  • Custom fail2ban Filter

    - by Michael Robinson
    In my quest to block excessive failed phpMyAdmin login attempts with fail2ban, I've created a script that logs said failed attempts to a file: /var/log/phpmyadmin_auth.log Custom log The format of the /var/log/phpmyadmin_auth.log file is: phpMyadmin login failed with username: root; ip: 192.168.1.50; url: http://somedomain.com/phpmyadmin/index.php phpMyadmin login failed with username: ; ip: 192.168.1.50; url: http://192.168.1.48/phpmyadmin/index.php Custom filter [Definition] # Count all bans in the logfile failregex = phpMyadmin login failed with username: .*; ip: <HOST>; phpMyAdmin jail [phpmyadmin] enabled = true port = http,https filter = phpmyadmin action = sendmail-whois[name=HTTP] logpath = /var/log/phpmyadmin_auth.log maxretry = 6 The fail2ban log contains: 2012-10-04 10:52:22,756 fail2ban.server : INFO Stopping all jails 2012-10-04 10:52:23,091 fail2ban.jail : INFO Jail 'ssh-iptables' stopped 2012-10-04 10:52:23,866 fail2ban.jail : INFO Jail 'fail2ban' stopped 2012-10-04 10:52:23,994 fail2ban.jail : INFO Jail 'ssh' stopped 2012-10-04 10:52:23,994 fail2ban.server : INFO Exiting Fail2ban 2012-10-04 10:52:24,253 fail2ban.server : INFO Changed logging target to /var/log/fail2ban.log for Fail2ban v0.8.6 2012-10-04 10:52:24,253 fail2ban.jail : INFO Creating new jail 'ssh' 2012-10-04 10:52:24,253 fail2ban.jail : INFO Jail 'ssh' uses poller 2012-10-04 10:52:24,260 fail2ban.filter : INFO Added logfile = /var/log/auth.log 2012-10-04 10:52:24,260 fail2ban.filter : INFO Set maxRetry = 6 2012-10-04 10:52:24,261 fail2ban.filter : INFO Set findtime = 600 2012-10-04 10:52:24,261 fail2ban.actions: INFO Set banTime = 600 2012-10-04 10:52:24,279 fail2ban.jail : INFO Creating new jail 'ssh-iptables' 2012-10-04 10:52:24,279 fail2ban.jail : INFO Jail 'ssh-iptables' uses poller 2012-10-04 10:52:24,279 fail2ban.filter : INFO Added logfile = /var/log/auth.log 2012-10-04 10:52:24,280 fail2ban.filter : INFO Set maxRetry = 5 2012-10-04 10:52:24,280 fail2ban.filter : INFO Set findtime = 600 2012-10-04 10:52:24,280 fail2ban.actions: INFO Set banTime = 600 2012-10-04 10:52:24,287 fail2ban.jail : INFO Creating new jail 'fail2ban' 2012-10-04 10:52:24,287 fail2ban.jail : INFO Jail 'fail2ban' uses poller 2012-10-04 10:52:24,287 fail2ban.filter : INFO Added logfile = /var/log/fail2ban.log 2012-10-04 10:52:24,287 fail2ban.filter : INFO Set maxRetry = 3 2012-10-04 10:52:24,288 fail2ban.filter : INFO Set findtime = 604800 2012-10-04 10:52:24,288 fail2ban.actions: INFO Set banTime = 604800 2012-10-04 10:52:24,292 fail2ban.jail : INFO Jail 'ssh' started 2012-10-04 10:52:24,293 fail2ban.jail : INFO Jail 'ssh-iptables' started 2012-10-04 10:52:24,297 fail2ban.jail : INFO Jail 'fail2ban' started When I issue: sudo service fail2ban restart fail2ban emails me to say ssh has restarted, but I receive no such email about my phpmyadmin jail. Repeated failed logins to phpMyAdmin does not cause an email to be sent. Have I missed some critical setup? Is my filter's regular expression wrong? Update: added changes from default installation Starting with a clean fail2ban installation: cp /etc/fail2ban/jail.conf /etc/fail2ban/jail.local Change email address to my own, action to: action = %(action_mwl)s Append the following to jail.local [phpmyadmin] enabled = true port = http,https filter = phpmyadmin action = sendmail-whois[name=HTTP] logpath = /var/log/phpmyadmin_auth.log maxretry = 4 Add the following to /etc/fail2ban/filter.d/phpmyadmin.conf # phpmyadmin configuration file # # Author: Michael Robinson # [Definition] # Option: failregex # Notes.: regex to match the password failures messages in the logfile. The # host must be matched by a group named "host". The tag "<HOST>" can # be used for standard IP/hostname matching and is only an alias for # (?:::f{4,6}:)?(?P<host>\S+) # Values: TEXT # # Count all bans in the logfile failregex = phpMyadmin login failed with username: .*; ip: <HOST>; # Option: ignoreregex # Notes.: regex to ignore. If this regex matches, the line is ignored. # Values: TEXT # # Ignore our own bans, to keep our counts exact. # In your config, name your jail 'fail2ban', or change this line! ignoreregex = Restart fail2ban sudo service fail2ban restart PS: I like eggs

    Read the article

  • RAID1 rebuild fails due to disk errors

    - by overlord_tm
    Quick info: Dell R410 with 2x500GB drives in RAID1 on H700 Adapter Recently one of drives in RAID1 array on server failed, lets call it Drive 0. RAID controller marked it as fault and put it offline. I replaced faulty disk with new one (same series and manufacturer, just bigger) and configured new disk as hot spare. Rebuild from Drive1 started immediately and after 1.5 hour I got message that Drive 1 failed. Server was unresponsive (kernel panic) and required reboot. Given that half hour before this error rebuild was at about 40%, I estimated that new drive is not in sync yet and tried to reboot just with Drive 1. RAID controller complained a bit about missing RAID arrays, but it found foreign RAID array on Drive 1 and I imported it. Server booted and it runs (from degraded RAID). Here is SMART data for disks. Drive 0 (the one that failed first) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 142 142 021 - 3866 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10432 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 112 106 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 198 000 - 3 And Drive 1 (the drive which was reported healthy from controller until rebuild was attempted) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 35 3 Spin_Up_Time POS--K 143 143 021 - 3841 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10455 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 114 105 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 3 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 In extended error logs from SMART I found: Drive 0 has only one error Error 1 [0] occurred at disk power-on lifetime: 10282 hours (428 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 18 00 00 00 6a 24 20 40 00 Error: IDNF at LBA = 0x006a2420 = 6956064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 60 00 f8 00 00 00 6a 24 20 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 18 00 60 00 00 00 6a 24 00 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 80 00 58 00 00 00 6a 23 80 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 68 00 50 00 00 00 6a 23 18 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 10 00 10 00 00 00 6a 23 00 40 00 17d+20:25:18.104 WRITE FPDMA QUEUED But Drive 1 has 883 errors. I see only few last ones and all errors I can see look like this: Error 883 [18] occurred at disk power-on lifetime: 10454 hours (435 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 00 80 00 00 39 97 19 c2 40 00 Error: AMNF at LBA = 0x399719c2 = 966203842 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:57.802 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:57.779 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:55.704 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:55.681 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:53.606 READ FPDMA QUEUED Given those errors, is there any way I can rebuild RAID back, or should I make backup, shutdown server, replace disks with new ones and restore it? What about if I dd faulty disk to new one from linux running on USB/CD? Also, if anyone have more experiences, what could be causes for those errors? Crappy controller or disks? Disks are about 1 year old, but it is pretty unbelievable to me that both would die within so short timespan.

    Read the article

  • List all devices of system

    - by pareshverma91
    In my understanding linux can list only those devices which it can understand, i.e. for which the drivers have been installed. I think lspci is the command for that. But how can one figure out if there exists some device in the system for which the drivers are not installed and perhaps some hint about what that device is for and what driver would suffice for it. I would like to know this info so as to be able to recompile my linux kernel to a minimum and would like to avoid a hit and trial approach.

    Read the article

  • Cannot connect on TFS 2012 server through SSL with invalid certificate

    - by DaveWut
    I saw the problem on some forums and even here, but not as specific as mine. So here's the thing, So I've configured a TFS 2012 server, on one of my personnel server at home, and now, I'm trying to make it available through the internet, with the help of apache2 on a different UNIX based, physical server. The thing is working perfectly, I don't have any problem accessing the address https://tfs.something.com/tfs through my browser. The address can be pinged and I do have access to the TFS control panel through it. How does it work? Well, with apache2 you can set a virtual host and set up the ProxyPass and ProxyPassReserver setting, so the traffic can externally comes from a secure SSL connection, through a specified domain or sub-domain, but it can be locally redirect on a clear http session on a different port. This is my current setup. As I already said, I can access the web interface, but when I'm trying to connect with Visual Studio 2012, it can't be done. Here's the error I receive: http://i.imgur.com/TLQIn.png The technical information tells me: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. My SSL certificate is invalid and was automatically generated on my UNIX server. Even if I try to add it in the Trusted Root Certification Authorities either on my TFS server or on my local workstation, it doesn't work. I still receive the same error. Is there's a way to completely ignore certificate validation? If not, what's have I done? I mean, I've added the certificate in the trusted root certificates, it should works as mentioned on some forums... If you need more information, please ask me, I'll be pleased to provide you more. Dave

    Read the article

  • Is there anyway to get msiexec to echo to stdout instead of logging to a file

    - by mrmrcoleman
    As part of a continuous delivery pipeline I'd like to install an msi on a given machine. msiexec plus psexec does this perfectly, but it seems that msiexec can only log to a file and I need it to log to stdout/stderr. Right now, to get the output back into our CI software I'll have to add a second step to echo the contents of the log, which seems a bit pointless. Has anybody faced this issue before (and overcome it?) Thanks in advance for any help here. Mark

    Read the article

  • PostgreSQL server: 10k RPM SAS or Intel 520 Series SSD drives?

    - by Vlad
    We will be expanding the storage for a PostgreSQL server and one of the things we are considering is using SSDs (Intel 520 Series) instead of rotating discs (10k RPM). Price per GB is comparable and we expect improved performance, however we are concerned about longevity since our database usage pattern is quite write-heavy. We are also concerned about data corruption in case of power failure (due to SSDs write cache not flushing properly). We currently use RAID10 with 4 active HDDs (10k 146GB) and 1 spare configured in the controller. It's a HP DL380 G6 server with P410 Smart Array Controller and BBWC. What makes more sense: upgrading the drives to 300GB 10k RPM or using Intel 520 Series SSDs (240GB)?

    Read the article

  • Running two wsgi applications on the same server gdal org exception with apache2/modwsgi

    - by monkut
    I'm trying to run two wsgi applications, one django and the other tilestache using the same server. The tilestache server accesses the db via django to query the db. In the process of serving tiles it performs a transform on the incoming bbox, and in this process hit's the following error. The transform works without error for the specific bbox polygon when run manually from the python shell: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 325, in __call__ mimetype, content = requestHandler(self.config, environ['PATH_INFO'], environ['QUERY_STRING']) File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 231, in requestHandler mimetype, content = getTile(layer, coord, extension) File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 84, in getTile tile = layer.render(coord, format) File "/usr/lib/python2.7/dist-packages/TileStache/Core.py", line 295, in render tile = provider.renderArea(width, height, srs, xmin, ymin, xmax, ymax, coord.zoom) File "/var/www/tileserver/providers.py", line 59, in renderArea bbox.transform(METERS_SRID) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/geos/geometry.py", line 520, in transform g = gdal.OGRGeometry(self.wkb, srid) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geometries.py", line 131, in __init__ self.__class__ = GEO_CLASSES[self.geom_type.num] File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geometries.py", line 245, in geom_type return OGRGeomType(capi.get_geom_type(self.ptr)) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geomtype.py", line 43, in __init__ raise OGRException('Invalid OGR Integer Type: %d' % type_input) OGRException: Invalid OGR Integer Type: 1987180391 I think I've hit the non thread safe issue with GDAL, metioned on the django site. Is there a way I could configure this so that it would work? Apache Version: Apache/2.2.22 (Ubuntu) mod_wsgi/3.3 Python/2.7.3 configured Apache apache2/sites-available/default: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/bin LogLevel warn WSGIDaemonProcess lbs processes=2 maximum-requests=500 threads=1 WSGIProcessGroup lbs WSGIScriptAlias / /var/www/bin/apache/django.wsgi Alias /static /var/www/lbs/static/ </VirtualHost> <VirtualHost *:8080> ServerAdmin [email protected] DocumentRoot /var/www/bin LogLevel warn WSGIDaemonProcess tilestache processes=1 maximum-requests=500 threads=1 WSGIProcessGroup tilestache WSGIScriptAlias / /var/www/bin/tileserver/tilestache.wsgi </VirtualHost> Django Version: 1.4 httpd.conf: Listen 8080 NameVirtualHost *:8080 UPDATE I've added the a test.wsgi script to determine if the GLOBAL interpreter setting is correct, as mentioned by graham and described here: http://code.google.com/p/modwsgi/wiki/CheckingYourInstallation#Sub_Interpreter_Being_Used It seems to show the expected result: [Tue Aug 14 10:32:01 2012] [notice] Apache/2.2.22 (Ubuntu) mod_wsgi/3.3 Python/2.7.3 configured -- resuming normal operations [Tue Aug 14 10:32:01 2012] [info] mod_wsgi (pid=29891): Attach interpreter ''. I've worked around the issue for now by changing the srs used in the db so that the transform is unnecessary in tilestache app. I don't understand why the transform() method, when called in the django app works, but then in the tilestache app fails. tilestache.wsgi #!/usr/bin/python import os import time import sys import TileStache current_dir = os.path.abspath(os.path.dirname(__file__)) project_dir = os.path.realpath(os.path.join(current_dir, "..", "..")) sys.path.append(project_dir) sys.path.append(current_dir) os.environ['DJANGO_SETTINGS_MODULE'] = 'bin.settings' sys.stdout = sys.stderr # wait for the apache django lbs server to start up, # --> in order to retrieve the tilestache cfg time.sleep(2) tilestache_config_url = "http://127.0.0.1/tilestache/config/" application = TileStache.WSGITileServer(tilestache_config_url) UPDATE 2 So it turned out I did need to use a projection other than the google (900913) one in the db. So my previous workaround failed. While I'd like to fix this issue, I decided to work around the issue this type by making a django view that performs the transform needed. So now tilestache requests the data through the django app and not internally.

    Read the article

  • Common and maximum number of virtual machines per server?

    - by Rabarberski
    For a project I am trying to get real-life estimates for the number of virtual machines per server, both typically and maximally. Of course, the maximum number of VMs would be depending on the type of applications (disk intensive, network intensive, ...), and server hardware (like number of cores, memory, ...), but still it would be useful to know if a typical maximum is about 10, 20 or 30 VMs per server. Can anybody give practical numbers?

    Read the article

  • Windows 3 Animated Background/Desktop/Wallpaper

    - by Synetech
    In the summer of 1995, I visited some family in Los Angeles. My uncle had a computer with Windows 3 (or some version thereof since Windows 95 had not been released yet). In Windows 3, there was no desktop or wallpaper like in later versions; instead you could set it to a simple pattern (still possible in later versions before XP) like hounds-tooth or bricks (interestingly, there seems to be next to nothing available on the Internet about this anymore; no screenshots and almost no pages). I recall being amused when I found a program (on the still young “world-wide web”) that would actually let you set an animated background. It was smooth and fluid and was quite an amazing thing at the time. If I recall correctly, it had several built-in animations including one of a light-orange-pink background over which storks flew towards the top-left, possibly with some light stuff floating in the “background” (they were actually animated and flapped their wings, not simply translated coordinates). The storks were somewhat simplified, black-line drawings. Over the years, I’ve tried finding it again a few times but never could. Worse, it’s become harder and harder over time as new programs came out and polluted the search results. I’m hoping that someone remembers this software and knows some useful information like the author or where to download it. (No, it’s not ScreenPaper. That was created in 1997 to let you set a screensaver as the Windows 95/NT4 background. This was at least two years earlier for Windows 3 and I’m almost certain it had these animations built-in—I don’t recall any stork screensavers for Windows 3.)

    Read the article

  • Our application is responding different on client server

    - by WtFudgE
    I have an application running on our local server and it works perfect. However when I deploy my application to our client's server there are problems. If i copy all the sources to another local from their server, it works fine again.... I am talking about an ASP.NET application talking with windows server 2008. The server specs of our client are: intel Xeon 2.13 GHz 6 GB RAM 300 GB HDD windows server 2008 R2 Although I think it's not that important I will describe the problems I am talking about to give u a better idea: It is related to upating and deleting fields in the sql server. Whenever there is more than one user running the application, and updates or deletes (not even the same record!0, there seems to be fields updating/deleting wrongly. But as I said before, if we copy the source to another server it is not the case. So I assumed it is more configuration related. Do you guys have any idea what the issue could be? Thanks a lot EDIT: my client old me he disabled the sql related accounts Could this be related?

    Read the article

  • Do the amount of CUDA cores matter for Sony Vegas

    - by Saif Bechan
    I am building a new PC, and I am wondering if I am making the right choices. The PC will mainly be used for video editing, and mainly in Sony Vegas. Now I have the choice of going with a video that that has more of less CUDO cores. To be precise I am choosing between a Ti and non-Ti version of an nVidea video card. Now I have read that sony vegas can partially use the CUDA cores to it's benefit, but not that much, and only if you use GPU acceleration. On the other hand I have heard it's better to leave GPU acceleration off as it will effect the quality of the output. Making it so that the CUDA cores actually don't make much of a difference after all.

    Read the article

  • Linux Mint Wireless doesn't connect

    - by guisantogui
    I'm having a great problem, I've installed Linux mint debian edition (LMDE), and following this tutorial http://community.linuxmint.com/tutorial/view/161 I did installed the network driver. The available connections appears to me, but when i try to connect to my connection at first time, I got this message: "(4) Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." And the following tries, I got this another message: "(32) Insufficient privileges." I'm accepting ideas. Thanks. EDIT: The last piece of the logs: Oct 5 00:22:38 gsouza-host ntpd[2116]: peers refreshed Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): bringing up device. Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: nl80211: 'nl80211' generic netlink not found Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: Failed to initialize driver 'nl80211' Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: rfkill: WLAN soft blocked Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> WiFi hardware radio set enabled Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> WiFi now enabled by radio killswitch Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): supplicant interface state: starting -> ready Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): supplicant interface state: ready -> inactive Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <warn> Trying to remove a non-existant call id. Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: rfkill: WLAN unblocked Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::7ae4:ff:fe4a:13a9. Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: New relevant interface wlan0.IPv6 for mDNS. Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: Registering new address record for fe80::7ae4:ff:fe4a:13a9 on wlan0.*. Oct 5 00:22:46 gsouza-host ntpd[2116]: Listen normally on 7 wlan0 fe80::7ae4:ff:fe4a:13a9 UDP 123 Oct 5 00:22:46 gsouza-host ntpd[2116]: peers refreshed

    Read the article

  • Hardware Acceleration on Windows Server 2008

    - by user1184598
    Does Windows Server 2008 have hardware acceleration? I tried to use WPF to make over 20,000 drawings. It only cause around 40% CPU in windows 7. However, I run the same program on Windows Server 2008 with the same hardware configuration except that it has a dedicated graphical display card (GT 9500) while Windows 7 has only an onboard display card, it cause over 80% CPU. So, does Windows Server 2008 have hardware acceleration? Or could I make it? And how do I change the hardware acceleration setting? Thanks.

    Read the article

  • PBS batch jobs - the qalter command

    - by Ryan Budney
    I've got a giant computation running on a Scientific Linux cluster. At present I have over 600 jobs parked in the queue, waiting for processor time, while a few are running. I'm trying to use the qalter command on some of the idle but scheduled jobs. I'd like to schedule them for a later time, so that other users can jump part of the queue, sort of as an act of politeness. Is this doable? For example, JOBNAME 292399 is currently idle, scheduled to be run whenever a spot in the queue opens up. But if I run qalter -a 10051000 292398 followed by qrerun 292398 I get qrerun: Request invalid for state of job 292398.euler. From the qalter documentation, I thought 10051000 refers to tomorrow (oct 5th, 10am) but perhaps I'm misunderstanding something? If I'm going about this the wrong way, please let me know. The main thing I'm looking for is a command that's easily scriptable, so that I can modify when my queued tasks get run. qalter seems good for those purposes if I can get it working. I'd rather avoid running qdel and re qsubbing the computations, as there's a bookkeeping issue on which tasks to restart (vs which ones not to). I want to avoid that kind of bookkeeping. From googling around I notice some qalter commands have rather different date formats, but the above appears to be correct, as far as I can tell from the man docs. Any help would be appreciated.

    Read the article

  • git problems installing stuff [closed]

    - by dale
    [email protected]:~# cd [email protected]:~# git clone --depth 1 git://source.ffmpeg.org/ffmpeg Initialized empty Git repository in /root/ffmpeg/.git/ [email protected]:~# cd [email protected]:~# git clone --depth 1 git://source.ffmpeg.org/ffmpeg Initialized empty Git repository in /root/ffmpeg/.git/ [email protected]:~# git clone git://source.ffmpeg.org/ffmpeg.git ffmpeg Initialized empty Git repository in /root/ffmpeg/.git/ cd [email protected]:~# wget "http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz" -O ffmpeg-snapshot.tar.gz --2012-10-05 05:43:55-- http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz Resolving git.videolan.org... 2a01:e0d:1:3:58bf:fa76:0:1, 88.191.250.118 Connecting to git.videolan.org|2a01:e0d:1:3:58bf:fa76:0:1|:80... [email protected]:~# cd [email protected]:~# wget "http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz" -O ffmpeg-snapshot.tar.gz --2012-10-05 05:44:17-- http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz Resolving git.videolan.org... 2a01:e0d:1:3:58bf:fa76:0:1, 88.191.250.118 Connecting to git.videolan.org|2a01:e0d:1:3:58bf:fa76:0:1|:80...

    Read the article

  • Can hard drives experience magnetic interference from a server chassis?

    - by eek142
    I'm currently building a server, and it's exhibiting the weirdest behavior with the hard drive. It is a 2U case, and I have trouble trouble accessing the Seagate SATAIII hard drive when it is in the bottom slot of the hard drive cage. The case is made of galvanized/anodized steel. I thought the drive was DOA, but then I swapped it into the top slot, and the problem was solved--the system had no trouble recognizing the drive anymore! This got me thinking: Is it possible that the magnetic field from the chassis was affecting the hard drive's functionality? I only have this problem with the mechanical hard drive, not the SSD. Could it be because the chassis is made of steel? I'm baffled.

    Read the article

  • How to add unused space to another partition in gparted?

    - by user1490211
    In my hard drive windows takes up 100 gb, then backtrack takes up 100 gb. When I make backtrack's partition smaller i get 100 gb for windows, 50 gb for backtrack, and 50 gb of unused space (in that exact order). How do I reallocate that 50 gb of space to windows so that instead it is 150 gb for windows, then 50 gb for backtrack? I'm using gparted and i can't move the unused space or add it to windows' partition.

    Read the article

  • script to run sox to combine multiple mono tracks to stereo

    - by Ze'ev
    I have a folder full of .wav audio files. Some are stereo, most are mono splits. The mono split pairs are all named foo bar track.L.wav and foo bar track.R.wav I can use the command line tool sox to combine a mono pair into 1 stereo track like this: sox -M track1.L.wav track1.R.wav track1.Stereo.wav where the first 2 files are the mono pairs, and the third is the output stereo file. This is great, but I'd like to have a script that will automatically find all the mono pairs and combine them into stereo files. I.e., I need it to find all files which have the same name except for the .L. and .R. before the extension, and run sox on them, outputting to a new file with the same name without the L/R suffix. For example, if my folder contains these files: track1.L.wav track2.L.wav track3.L.wav track4.L.wav track1.R.wav track2.R.wav track3.R.wav track4.R.wav track6.wav track7.wav I need to run these commands: sox -M track1.L.wav track1.R.wav track1.Stereo.wav sox -M track2.L.wav track2.R.wav track2.Stereo.wav sox -M track3.L.wav track3.R.wav track3.Stereo.wav sox -M track4.L.wav track4.R.wav track4.Stereo.wav Here's where I am so far: for file in ./*.L.wav; do file2=`echo $file | sed 's_\(.*\).L.wav_\1.R.wav_'`; out=`echo $file | sed 's_\(.*\).L.wav_\1.STEREO.wav_'`; echo $file - $file2 - $out; done That works, but when I replace the echo line with sox -M $file $file2 $out; it doesn't work; spaces in the filenames cause it to fail.

    Read the article

  • Setup Linksys 3200 remote access

    - by Greg
    I'm trying to setup remote access for my linksys 3200 so that I can configure it through the WAN port. I have turned on remote access, however when I try to connect I get a 404 error. The settings I have are: When I try to access xxx.xxx.xxx.xxx:9999 I just get a 404 error. I have allowed RDP access to a computer behind the router and this works fine on the same IP address. Any idea's on what else I have to do to allow remote management access? UPDATE: I tried changing the port to 80 and it works. Change it back to any other number and it doesn't work. Modem is setup with a DMZ to the router's IP. Why does it only work on port 80? BTW I can't use port 80 because there is a website hosted behind the router.

    Read the article

  • Crash in audio resampler with some audio rates - FFMPEG PHP ( Solved! )

    - by Olaf Erlandsen
    i have a problem with this command( FFMPEG PHP ): Command: ffmpeg -i 62f76f050494f0ed6a5997967c00c0c0.wmv -ss 0 -t 99 -y -ar 44100 -async 44100 -r 29.970 -ac 2 -qscale 5 -f flv 62f76f050494f0ed6a5997967c00c0c0.flv Output: FFmpeg version 0.6.5, Copyright (c) 2000-2010 the FFmpeg developers built on Jan 29 2012 17:52:15 with gcc 4.4.5 20110214 (Red Hat 4.4.5-6) configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --incdir=/usr/include --disable-avisynth --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -fPIC' --enable-avfilter --enable-avfilter-lavf --enable-libdc1394 --enable-libdirac --enable-libfaac --enable-libfaad --enable-libfaadbin --enable-libgsm --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared --enable-swscale --enable-vdpau --enable-version3 --enable-x11grab libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.19. 0 / 1.19. 0 libswscale 0.11. 0 / 0.11. 0 libpostproc 51. 2. 0 / 51. 2. 0 [asf @ 0xe81670]max_analyze_duration reached Input #0, asf, from '/var/www/resources/tmp/62f76f050494f0ed6a5997967c00c0c0.wmv': Metadata: WMFSDKVersion : 12.0.7601.17514 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 Duration: 00:00:50.87, bitrate: 2467 kb/s Stream #0.0: Audio: wmapro, 44100 Hz, stereo, flt, 256 kb/s Stream #0.1: Video: vc1, yuv420p, 950x460 [PAR 1:1 DAR 95:46], 25 fps, 25 tbr, 1k tbn, 25 tbc Output #0, flv, to '/var/www/resources/media/62f76f050494f0ed6a5997967c00c0c0.flv': Metadata: encoder : Lavf52.64.2 Stream #0.0: Video: flv, yuv420p, 950x460 [PAR 1:1 DAR 95:46], q=2-31, 200 kb/s, 1k tbn, 29.97 tbc Stream #0.1: Audio: libmp3lame, 11025 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.1 -> #0.0 Stream #0.0 -> #0.1 Press [q] to stop encoding frame= 72 fps= 0 q=5.0 size= 0kB time=10.91 bitrate= 0.0kbits/s Multiple frames in a packet from stream 0 Warning, using s16 intermediate sample format for resampling frame= 141 fps=139 q=5.0 size= 103kB time=8.15 bitrate= 103.2kbits/s frame= 220 fps=144 q=5.0 size= 875kB time=10.92 bitrate= 656.6kbits/s frame= 290 fps=143 q=5.0 size= 1525kB time=13.74 bitrate= 909.1kbits/s frame= 356 fps=141 q=5.0 size= 2153kB time=15.99 bitrate=1103.1kbits/s frame= 427 fps=141 q=5.0 size= 2847kB time=18.70 bitrate=1247.0kbits/s frame= 497 fps=141 q=5.0 size= 3771kB time=21.16 bitrate=1460.0kbits/s frame= 575 fps=142 q=5.0 size= 4695kB time=24.61 bitrate=1563.0kbits/s frame= 639 fps=141 q=5.0 size= 5301kB time=26.80 bitrate=1620.2kbits/s frame= 703 fps=139 q=5.0 size= 5829kB time=29.36 bitrate=1626.2kbits/s frame= 774 fps=139 q=5.0 size= 6659kB time=32.39 bitrate=1684.0kbits/s frame= 842 fps=139 q=5.0 size= 7915kB time=35.27 bitrate=1838.6kbits/s frame= 911 fps=139 q=5.0 size= 9011kB time=37.98 bitrate=1943.4kbits/s frame= 975 fps=138 q=5.0 size= 9788kB time=40.59 bitrate=1975.3kbits/s frame= 1041 fps=138 q=5.0 size= 10904kB time=43.83 bitrate=2037.9kbits/s frame= 1115 fps=138 q=5.0 size= 11795kB time=46.24 bitrate=2089.8kbits/s frame= 1183 fps=138 q=5.0 size= 12678kB time=48.74 bitrate=2130.7kbits/s frame= 1247 fps=137 q=5.0 size= 13964kB time=51.36 bitrate=2227.5kbits/s frame= 1271 fps=136 q=5.0 Lsize= 15865kB time=58.86 bitrate=2208.1kbits/s video:15366kB audio:462kB global headers:0kB muxing overhead 0.238956% Problem: Warning, using s16 intermediate sample format for resampling I've also tried changing the parameter From -ar 44100 to -ar 11025 Thanks! Solution: Read this link: http://en.wikipedia.org/wiki/MP3#Bit_rate

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >