Daily Archives

Articles indexed Wednesday October 30 2013

Page 1/19 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• How to improve Windows Server 2008 R2 to handle many connections?

  - by invisal

  It has been a few days so far that I am trying to figure how to solve this problem. First of all, I am running a website with an average daily page view of 350,000. Previously, all ads management (tracking click and impression that each ads has served) and content were served in a single server with the following spec: Server 1 OS: Windows 2008 R2 64-Bit CPU: Intel® Core™ i5 - 4 cores RAM: 8 GB Storage: 2 x 1 TB hard drives Bandwidth: 10 TB per month To improve our website speed, I decided to separate the ads management script to another dedicated server because we have more than 15 advertisers to 30 advertisers per each page. Server 2 OS: Windows 2008 R2 64-Bit CPU: Intel® Core™ i5 - 4 cores RAM: 4 GB Storage: 2 x 300 GB hard drives Bandwidth: 10 TB per month The Problem The problem is that Server 1 can handle both content and ads system. Now, that I take away the ads system and put it at Server 2. Server 2 can barely serve only ads system. Test First of all, I moved 75% of the ads to Server 2. And then, perform a ping to server: ping -t xxxxx. [I did the ping for 10 minutes and its following similar pattern as below] Reply from xxxxx bytes=32 time=290ms TTL=116 Reply from xxxxx bytes=32 time=289ms TTL=116 Reply from xxxxx bytes=32 time=320ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Reply from xxxxx bytes=32 time=348ms TTL=116 Reply from xxxxx bytes=32 time=284ms TTL=116 Then, I moved 100% of the ads to Server 2. Then, perform a ping to server again. [I did the ping for 10 minutes and its following similar pattern as below] Reply from xxxxx bytes=32 time=290ms TTL=116 Request timed out Reply from xxxxx bytes=32 time=320ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Request timed out Request timed out Reply from xxxxx bytes=32 time=284ms TTL=116 Attempts Increase MaxUserPort and TcpNumConnection Restart the server Increase IIS Max Instances and Instance MaxRequests Server Resource Only 10%-15% of the network connection is used Only 10%-15% of the CPU is used Only 25% of the memory is used

  Read the article

• What to do for a 1 million concurrent web application? [duplicate]

  - by Amit Singh

  This question already has an answer here: How do you do load testing and capacity planning for web sites? 3 answers There are few things that I would like to know here. What server configuration do I need. And if I am deploying it on EC2 how many VMs do I need and what should be their configuration. What options do I have to do a load testing for 1 million concurrent users. Any pointer to (for php) how to code or what to keep in mind for such application. This is for sure that I don't exactly know what to ask because this is my first application on this scale. But one thing is clear that this application should pass a load test of 1 million concurrent request.

  Read the article

• Can I config different VIP per service pointing same Real servers with Cisco ACE?

  - by Kamome

  I'm using Cisco ACE Module with Cisco Catalyst 6504. There are 2 real servers connected to Switch, and runs three different services. (TCP 82, 83 and 84) I have to use three different URLs per service. (for example, a.com for TCP 82, b.com for TCP 83 and c.com for TCP 84) Therefore, I need three IPs. The problem is, is it possible that configure 3 different VIPs with same real servers with Cisco ACE Module? I mean, if VIPs are 1.1.1.1, 2.2.2.2, 3.3.3.3 and real servers are 4.4.4.4, 5.5.5.5, can I configure as following : VIP 1.1.1.1:82 Real Server 4.4.4.4:82, 5.5.5.5:82 VIP 2.2.2.2:83 Real Server 4.4.4.4:83, 5.5.5.5:83 VIP 3.3.3.3:84 Real Server 4.4.4.4:84, 5.5.5.5:84 I think, logically, it's possible. But is it REALLy possible?

  Read the article

• 0 connected nodes in datastax opscenter

  - by gansbrest

  Installed opscenterd on the separate node outside of the cluster, but within firewall ( aws security group ). Tested all possible ports between agents and opcenter server. No errors in the log.. 2013-10-30 01:07:23+0000 [FC_Cluster] INFO: Initializing event storage. 2013-10-30 01:07:23+0000 [FC_Cluster] INFO: Attempting to load all persisted alert rules 2013-10-30 01:07:23+0000 [FC_Cluster] INFO: Done loading persisted alert rules 2013-10-30 01:07:23+0000 [FC_Cluster] INFO: Done initializing event storage. 2013-10-30 01:07:23+0000 [FC_Cluster] INFO: Done loading persisted scheduled job descriptions 2013-10-30 01:07:23+0000 [FC_Cluster] INFO: OpsCenter starting up. 2013-10-30 01:07:23+0000 [] INFO: Finished starting new cluster services for FC_Cluster 2013-10-30 01:08:04+0000 [FC_Cluster] INFO: Agent for ip 10.34.10.185 is version u'3.2.2' 2013-10-30 01:08:04+0000 [FC_Cluster] INFO: Agent for ip 10.32.37.251 is version u'3.2.2' 2013-10-30 01:08:04+0000 [FC_Cluster] INFO: Agent for ip 10.82.226.252 is version u'3.2.2' The most interesting part that I can see some data in the opscenter UI, when I stop agents, there is no data displayed, when I start - it show up again, but at the same time it shows 0 connected nodes. Storage capacity is even funnier - 3 of 0 nodes.. Any ideas why that could be happening?

  Read the article

• How to ping virtualbox guest machine by hostname? [migrated]

  - by Punit Soni

  Here is the summary. VirtualBox 4.2.18 Host OS: Windows 7 Guest OS: Ubuntu 12.04 Networking: Bridged Adaptor I can ping Host and other machines in host's network from ubuntu guest using hostnames. But, I can only ping the guest machine using IP address from host and network machines. I have avahi-daemon running on Guest OS. I want to be able to ping/ssh the guest machine from host and other machines on network using hostname of the guest machine. Please help.

  Read the article

• What can I do to speed up createrepo?

  - by jsd

  We are using a yum repository to distribute our software to our production instances. Unfortunately, createrepo is becoming a bottleneck, and we only have 469 packages in the repository. $ time createrepo /opt/tm-yum-repo Spawning worker 0 with 469 pkgs Workers Finished Gathering worker results Saving Primary metadata Saving file lists metadata Saving other metadata Generating sqlite DBs Sqlite DBs complete real 0m43.188s user 0m37.798s sys 0m1.296s What can I do to make it faster?

  Read the article

• Debian's Wordpress with broken plugin path?

  - by Vinícius Ferrão

  I've installed an Wordpress from Debian Wheezy package system and the plugins folder appears to be broken. As stated in the error log files of Apache2: [error] File does not exist: /var/lib/wordpress/wp-content/plugins/var The plugins are looking for an URL based on the full path, and not on the relative path. I can "temporary fix" the problem making a symbolic link to /var on the plugins folder, but I know that this is wrong and dirty. I don't know where to start debugging this. So any help is welcome. Additional information: /etc/wordpress/htaccess # Multisites generated htaccess RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] # add a trailing slash to /wp-admin RewriteRule ^([_0-9a-zA-Z-]+/)?wp-admin$ $1wp-admin/ [R=301,L] RewriteCond %{REQUEST_FILENAME} -f [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^ - [L] RewriteRule ^([_0-9a-zA-Z-]+/)?(wp-(content|admin|includes).*) $2 [L] RewriteRule ^([_0-9a-zA-Z-]+/)?(.*\.php)$ $2 [L] RewriteRule . index.php [L] Apache2 Configuration File: <VirtualHost *:80> Alias /wp-content /var/lib/wordpress/wp-content DocumentRoot /usr/share/wordpress ServerAdmin [email protected] <Directory /usr/share/wordpress> Options FollowSymLinks AllowOverride Limit Options FileInfo DirectoryIndex index.php Order allow,deny Allow from all </Directory> <Directory /var/lib/wordpress/wp-content> Options FollowSymLinks Order allow,deny Allow from all </Directory> </VirtualHost> Thanks in advance,

  Read the article

• Cisco IOS policy route for router originated VPN traffic

  - by Paul

  We have a Cisco IOS router with two DSL connections. One of them is intended for general traffic (ADSL), the other for VPN links (BDSL) and various other traffic. So the default route is the ADSL link, and we have a combination of static routes for the VPN traffic, and policy routes for other traffic types that should go out the BDSL link. For site to site traffic, this is fine, we just static route the public IPs and remote networks out of the BDSL line. The policy based routing works fine for any internal traffic that matches an ACL. The problem is now that there are remote VPN sites originating from dynamic addresses, so we cannot use static routes. The replies to incoming ISAKMP requests are following the default route out of the ADSL (despite there being no crypto map on that interface). I want to route the outgoing VPN traffic out of the BDSL. I have tried adding udp/500 and esp to and from the route-map acl that pushes traffic out of the BDSL line, but it doesn't match, presumably because the route-map happen earlier than the IPSec stuff. Any ideas how I can do this? IOS ver: 12.4.13T.

  Read the article

• How do I get my ubuntu server to listen for database connections?

  - by Bob Flemming

  I am having a problems connecting to my database outside of phpmyadmin. Im pretty sure this is because my server isn't listening on port 3306. When I type: sudo netstat -ntlp on my OTHER working server I can see the following line: tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 20445/mysqld However, this line does not appear on the server I am having difficulty with. How do I make my sever listen for mysql connections? Here my my.conf file: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql #skip-networking=off #skip_networking=off #skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 0.0.0.0 # # * Fine Tuning # key_buffer = 64M max_allowed_packet = 64M thread_stack = 650K thread_cache_size = 32 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 2M query_cache_size = 32M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

  Read the article

• Possible to get cleartext password?

  - by Farhan

  I have hosting service hosted on more than 20+ Plesk servers, version 11. As in the previous versions, the passwords were not encrypted, then if i had to design some tools to manage the hosting accounts, i just picked up the cleartext passwords from the Database. but as now the passwords are encrypted, is there any way i can decrypt the passwords? through API or any other way so that i can integrate my php based hosting management with plesk 11?

  Read the article

• Windows Server 2008 x86 Services for Unix SDK (SUA) RSH

  - by Andy Arismendi

  Running RSH commands on a Windows box against a Linux box works only for the administrator user. Is there a file somewhere that has a list of users that can run commands remotely? More Info The server configuration is automated by VMware's product... There's no /etc/hosts.equiv file setup but there is a /root/.rhosts file with an entry of [IP ADDRESS] +. The SUA client C:\Windows\SUA\bin\rsh can login when run as the local administrator account but no other user can login. The error is: rcmd: unknown user: [username]. The command I'm trying to run is: rsh -l root [IP ADDRESS] ls.

  Read the article

• uploading via http post (multipart/form-data) silently fails with big files

  - by matteo

  When uploading multipart/form-data forms via a http post request to my apache web server, very big files (i.e. 30MB) are silently discarded. On the server side all looks as if the attached file was received with 0 bytes size. On the client side all looks like it had been uploaded succesfully (it takes the expected long time to upload and the browser gives no error message). On the server, nothing is logged into the error log. An entry is logged into the access log as if everything was ok (a post request and a 200 ok response). These uploads are being posted to a php script. In the php script, If I print_r $_FILES, I see the following information for the relevant file: [file5] => Array ( [name] => MOV023.3gp [type] => video/3gpp [tmp_name] => /tmp/phpgOdvYQ [error] => 0 [size] => 0 ) Note both [error] = 0 (which should mean no error) and [size] = 0 (as if the file was empty). My php script runs fine and receives all the rest of the data except these files. move_uploaded_file succeeds on these files and actually copies them as 0byte files. I've already changed the php directives max_upload_size to 50M and post_max_size to 200M, so neither the single file nor the request exceed any size limit. max_execution_time is not relevant, because the time to transfer the data does not count; and I've increased max_input_time to 1000 seconds, though this shouldn't be necessary since this is the time taken to parse the input data, not the time taken to upload it. Is there any apache configuration, prior to php, that could be causing these files to be discarded even prior to php execution? Some limit in size or in upload time? I've read about a default 300 seconds timeout limit, but this should apply to the time the connection is idle, not the time it takes while actually transferring data, right? Needless to say, uploads with all exactly identical conditions (including file format, client and everything) except smaller file size, work seamlessly, so the issue is clearly related to the file or request size, or to the time it takes to send it.

  Read the article

• Yet another (13)Permission denied error on Apache2 server

  - by lollercoaster

  I just can't figure it out. I'm running apache2 on a Ubuntu 10.04 i386 server. Whenever I visit my server (has an IP address, and is connected to internet with static IP xxx.xxx.xxx.xxx) so that's not the problem) in browser, mysub.domain.edu (renamed here), I get the following: Forbidden You don't have permission to access /index.html on this server The apache2 error log confirms this: [Mon Apr 18 02:38:20 2011] [error] [client zzz.zzz.zzz.zzz] (13)Permission denied: access to / denied I'll try to provide all necessary information below: 1) Contents of /etc/apache2/httpd.conf DirectoryIndex index.html index.php 2) Contents of /etc/apache2/sites-available/default <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /home/myusername/htdocs <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/home/myusername/htdocs/"> Options Indexes FollowSymLinks MultiViews AllowOverride None order allow,deny allow from all DirectoryIndex index.html index.php Satisfy any </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> ServerName mysub.domain.edu </VirtualHost> 3) Contents of /etc/apache2/sites-enabled/000-default <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /home/myusername/htdocs <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/home/myusername/htdocs/"> Options Indexes FollowSymLinks MultiViews AllowOverride None order allow,deny allow from all DirectoryIndex index.html index.php Satisfy any </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> ServerName mysub.domain.edu </VirtualHost> 4) Result of ls -l (when I'm using sudo -i to be root): root@myserver:/home/myusername# ls -l total 4 drwxr-xr-x 2 www-data root 4096 2011-04-18 03:04 htdocs 5) ps auxwww | grep -i apache root@myserver:/home# ps auxwww | grep -i apache root 15121 0.0 0.4 5408 2544 ? Ss 16:55 0:00 /usr/sbin/apache2 -k start www-data 15122 0.0 0.3 5180 1760 ? S 16:55 0:00 /usr/sbin/apache2 -k start www-data 15123 0.0 0.5 227020 2788 ? Sl 16:55 0:00 /usr/sbin/apache2 -k start www-data 15124 0.0 0.5 227020 2864 ? Sl 16:55 0:00 /usr/sbin/apache2 -k start root 29133 0.0 0.1 3320 680 pts/0 R+ 16:58 0:00 grep --color=auto -i apache 6) ls -al /home/myusername/htdocs/ root@myserver:/# ls -al /home/myusername/htdocs/ total 20 drwxr-xr-x 2 www-data root 4096 2011-04-18 03:04 . drw-r--r-- 4 myusername myusername 4096 2011-04-18 02:13 .. -rw-r--r-- 1 root root 69 2011-04-18 02:14 index.html I'm not currently using any .htaccess files in my web root (htdocs) folder in my user folder. I don't know what is wrong, I've been trying to fix his for over 12 hours and I've gotten nowhere. If you have any suggestions, I'm all ears...

  Read the article

• PhpMyAdmin::403 error - don't have permission to enter localhost/phpmyadmin/ on Apache2, Fedora 13

  - by George

  I am running an apache 2.17 at a Fedora 13. I did install phpmyadmin from the repos (via yum). It is installed in /usr/share/phpMyAdmin. I did make a symlink from my document root to the /user/share/phpMyadmin. I set 755 permsissions on that folder, set it to be owned by user apache and group apache. And yet, when I try to open http://localhost/phpmyadmin, it gives me the 403 error - you do not have permisssion! I tried also commenting some deny lines in the phpMyAdmin.conf file, no success. Any help would be gladly appreciated.

  Read the article

• USB ports causing Wireless and Mobile Phone tethering drop out

  - by chrolli

  I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

  Read the article

• my Website loss packet in 70% countries, how can i dertermine why its loss packets?

  - by user2511667

  I checked my website on google page speed tester, it show result 90/100. I checked my website on pingdom it shows good result there. When i check my website in cloudmonitor.ca.com, it shows good result in 30% countries and all other countries it show packet loss (100%) How we can determine why my website has packet loss? And what is its solution? Is this problem from my server or from my website? I created new html blank page and set it too my index page, after I tested, it still shows packet loss, guess this means the problem is not in my website. Here is live result When I visit my website in browser, website is working fine. But when i test my domain or IP 198.178.123.219 in command Prompt it shows "Request time out" Why time out in command prompt?

  Read the article

• cannot move file: "file cannot be found" (Windows XP)

  - by Steve

  I have some CR2 files in a subfolder of My Documents called My Photos on a Windows XP PC. I want to move them across a WIFI network to an external HDD attached to a Windows 7 PC. I have read/write permissions on the external HDD, as I mapped to this HDD using the Windows 7 user account. When I try to move a single CR2 file, I receive "Cannot copy IMG_3317: Cannot find the specified file. Make sure you specify the correct path and file name." If I refresh the source folder, the file is still there. It is not read only, and I have read/write access to the source file. I can view its properties. Why can't I move this file? I have been able to move similar files in the past.

  Read the article

• pfSense 2.1 OpenVPN client not using tunnelled interface

  - by Brian M. Hunt

  I'm having some trouble getting OpenVPN working on my pfSense box. The issue is quite strange to me. When I have the OpenVPN turned on, only my router is able to connect to the Internet. From the router I can use ping, links, etc., and connections work exactly as expected - through the VPN, with the IP address assigned by my VPN provider (Proxy.sh, incidentally). However, none of the clients on the local network can connect to the Internet. I get timeouts when using ping or a web browser. I can ping my router, and the IP address of the gateway. When I switch the default gateway from the VPN to my ISP's gateway, all works exactly as expected. Here the routing table (netstat -r) when in VPN mode, and a key for it: IPv4 Destination Gateway Flags Refs Use Mtu Netif Expire 0.0.0.0/1 10.XX.X.53 UGS 0 122 1500 ovpnc1 = default 10.XX.X.53 UGS 0 235 1500 ovpnc1 8.8.8.8 10.XX.X.53 UGHS 0 82 1500 ovpnc1 10.XX.X.1/32 10.11.0.53 UGS 0 0 1500 ovpnc1 10.XX.X.53 link#12 UH 0 0 1500 ovpnc1 10.XX.X.54 link#12 UHS 0 0 16384 lo0 ZZ.XX.XXX.0/20 link#1 U 0 83 1500 re0 ZZ.XX.XXX.XXX link#1 UHS 0 0 16384 lo0 127.0.0.1 link#9 UH 0 12 16384 lo0 128.0.0.0/1 10.11.0.53 UGS 0 123 1500 ovpnc1 192.168.1.0/24 link#11 U 0 1434 1500 ue0 192.168.1.1 link#11 UHS 0 0 16384 lo0 YYY.YYY.YYY.YYY/32 ZZ.XX.XXX.1 UGS 0 249 1500 re0 IP addresses 10.XX.X.53/54 - My DHCP-assigned IP address/pair from the VPN provider ZZ.XX.XXX.XXX - My external IP assigned by my ISP YYY.YYY.YYY.YYY - The external IP assigned by the VPN provider Interfaces ovpnc1 - My VPN client interface re0 - My LAN interface ue0 - My WAN interface This looks essentially what I would expect it to be. The default route is through the VPN provider. The VPN address is routed through the ISP-assigned IP address. I am not sure what would be wrong here. So figuring this was a firewall issue, I basically tried enabling all in/out traffic. This did not seem to remedy the problem. Also figuring it could possibly be some client networking issue, I restarted the clients on the LAN. This did not help. I also ran route flush and reset the routes manually. So I am a bit stumped, and would be very grateful for any thoughts on what the problem might be.

  Read the article

• pam debugging "check pass; user unknown"

  - by lvc

  I am attempting to get Prosody authenticating with its auth_pam module. It is configured to use the pam service name xmpp. The pam.d/xmpp file is copied straight from the one configured for dovecot (originally taken from, I think, dovecot's documentation), which is known to be working: # cat /etc/pam.d/xmpp auth required pam_unix.so nullok debug account required pam_unix.so debug Logging in with dovecot works wonderfully. Logging in with prosody, with exactly the same username and password, causes Prosody to return 'Not authorized', and the following in journalctl -f: Oct 29 22:12:14 riscque.net prosody[9396]: c2s1d010b0: Client sent opening <stream:stream> to riscque.net Oct 29 22:12:14 riscque.net prosody[9396]: c2s1d010b0: Sent reply <stream:stream> to client Oct 29 22:12:14 riscque.net prosody[9396]: [178B blob data] Oct 29 22:12:14 riscque.net unix_chkpwd[9408]: check pass; user unknown Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): conversation failed Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): unable to obtain a password Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): auth could not identify password for [lvc] Oct 29 22:12:14 riscque.net prosody[9396]: riscque.net:saslauth: sasl reply: <failure xmlns='urn:ietf:params:xml:ns:xmpp-sasl'><not-authorized/><text>Unable to authorize you with the authentication credentials you&apos;ve sent.</text></failure> This series of errors seems mutually contradictory - first it says "user unknown", but then that it can't obtain the password for lvc - this username certainly exists on the system. What is likely going on here, and how would I debug this further?

  Read the article

• Gif output not as smooth when selecting a sequence of files individually

  - by Keikoku

  I have a sequence of images 001.png 002.png 003.png that I would like to combine into an animation. I used the following command convert -dispose 3 -loop 0 *.png out.gif And it looks ok. However, when I tried this convert -dispose 3 -loop 0 "001.png" "002.png" "003.png" out2.gif out2.gif was not as "smooth" as out.gif. Why is there a difference in the output between the two commands, which seem to mean the same thing?

  Read the article

• How can I print a batch of files with custom printer settings?

  - by Li-aung Yip

  I have a collection of A3-size (tabloid size) PDF drawings which I would like to print as a batch. The particular printer I am using doesn't automatically check the paper size of the document - it always defaults to A4 (letter) size paper unless told otherwise. I need to go into the printer settings and tell the printer to use A3 size paper. A batch printing utility like DarkStorm's Batch Print Handler would be good for this. However this particular utility doesn't support changing the paper size settings or other printer settings. How can I go about batch printing these PDFs with a particular paper size?

  Read the article

• Since upgrading to Windows 8.1, I can't open any files on a SMB share shared by my OS X Mavericks Mac

  - by Gary

  I have a PC with Windows 8.1 and a Mac with Mavericks. I have a folder on the Mac that is shared with the PC. When I'm on the PC and I try to open a file that is shared by the Mac, such as an ISO file (a disk image), then I get a message saying that I cannot open the file, or the file is in use (it depends on the app/filetype). I have the same problem when I open a video file. Strangely, text files and PDF files are just fine. And if I copy any of the problematic files to the local Windows disk, then I can open them just fine. The specific error messages are: AVI files opened in VLC: "Your input can't be opened. VLC is unable to open the MRL." ISO files opened by Windows Explorer: "Sorry, there was a problem mounting the file." This only started happening after I upgraded to Windows 8.1 on the PC and Mavericks on the Mac. Mavericks upgraded its SMB version from SMB1 to SMB2, so perhaps that is related? Does anyone know what the problem might be, and how I could fix it? Thanks in advance!

  Read the article

• Front audio jack not working or missconfigured?

  - by Nicholas

  I have win xp and asus p5ql-e motherboard. The problem is that when i plug in my headphones on the front audio jack, the computer doesn't recognizes it. They work on the back audio jack but not on the front - how can i be sure that it;s not a software problem (something miss configured or not configured at all), before i conclude that it's a hardware problem (broken front audio jack or miss connected to the motherboard)?

  Read the article

• How to ping virtualbox guest machine by hostname?

  - by Punit Soni

  Here is the summary. VirtualBox 4.2.18 Host OS: Windows 7 Guest OS: Ubuntu 12.04 Networking: Bridged Adaptor I can ping Host and other machines in host's network from ubuntu guest using hostnames. But, I can only ping the guest machine using IP address from host and network machines. I have avahi-daemon running on Guest OS. I want to be able to ping/ssh the guest machine from host and other machines on network using hostname of the guest machine. Please help.

  Read the article

• How to boot between OSes from inside each OS? in a Windows/Ubuntu dual boot system

  - by TheCompander

  My ideal scenario is that there is a script/command to boot into the alternate OS from the current OS you are in, restarting the same OS without running the script/command will return it to the same OS. Currently I have grub setup to remember the last OS booted, using GRUB_DEFAULT=saved and GRUB_SAVEDEFAULT=true, I'd like to keep this option. I have read about the ability to manipulate grub from within Ubuntu to boot into windows, shown in this link. Is there a way to similarly boot into Ubuntu from within Windows? I am primarily connecting to this device remotely and hence my query.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >