Daily Archives

Articles indexed Friday December 24 2010

Page 10/25 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• 10GE network: Is it still deadly expensive? Any options?

  - by BarsMonster

  Hi! I am building home cluster where I going to have about 16 nodes which can live with 1G ports, but I really want to have 10GE on file server & central node. It's all local, so no need for cabels longer than 3-5m. And ofcourse I want to spend as little money as possible (not going to spend more than whole cluster costs) :-) What are my options? 1) Legacy solution is to take some 24-48 port 1GE switch, and connect to file/central nodes via 4-8 aggregated links. This will work I guess, cost is very acceptable, but I am not sure if it's ok to use that much aggregated links. And ofcourse it would be hard to double bandwidth when needed... :-D 2) Switch with several 10GE uplink 'ports'. As far as I see, they all require modules which costs about 1000$, so I will need 4 10G modules, and 2 10GE cards... Smells like way more than 5000$+... 3) Connect file & central node via 2 10G cards directly, and put 4 quadport 1GE NICs on fileserver. I am saving on 2 10G modules and a switch, fileserver will have to do packet routing, but it's still gonna have alot of CPU's left :-) 4) Any other options? Infiniband? 5) Are MyriNet adaptors works fine? I guess there are no cheaper options? 6) Hmm... Scrap fileserver, put it all on central node and provide dedicated 1GE port for each of the nodes... This is sad...

  Read the article

• USB-Sticks and multiple Partitions

  - by Bobby

  Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

  Read the article

• Feature pack for SQL Server 2005 SP4 - collection of standalone packages

  - by ssqa.net

  With the release of SQL2005Sp4 an additional task is essential for DBAs & Developers to avoid any compatibility issues with existing code agains SP4 instance. Feature pack for SQL Server 2005 SP4 is available to download which contains the standalone packages such as SQLNative Client, ADOMD, OLAPDM etc.... as it states the feature pack are built on latest versions of add-on and backward compatibility contents for SQL Server 2005. The above link provides individual file to download for each environment...(read more)

  Read the article

• Can I combine values from multiple rows in another table into multiple columns of one row using SQL?

  - by Jordi

  I have two tables: T1: | M_ID | P_ID1 | P_ID2 | rest of T1 columns | | 0 | 0 | 1 | ... | | 1 | 2 | 3 | ... | T2: | P_ID | Type | A | B | | 0 | 1 | a | e | | 1 | 2 | b | f | | 2 | 1 | c | g | | 3 | 2 | d | h | Now, I want to have a query that selects this: | M_ID | P_1a | P_1b | P_2a | P_2b | rest of T1 columns | | 0 | a | e | b | f | ... | | 1 | c | g | c | h | ... | So, in words: I want to select all columns from T1, but I want to replace P_ID1 with the columns from T2, where the P_ID is equal to P_ID1, and the type is 1, and basically the same for P_ID2. I can obviously get the information I need with multiple queries, but I was wondering if there is a way that I can do this with one query. Any ideas? I'm currently using SQL Server 2008r2, but I'd also be interested in solutions for other database software. Thanks for the help!

  Read the article

• Is having a lot of DOM elements bad for performance?

  - by rFactor

  Hi, I am making a button that looks like this: <!-- Container --> <div> <!-- Top --> <div> <div></div> <div></div> <div></div> </div> <!-- Middle --> <div> <div></div> <div></div> <div></div> </div> <!-- Bottom --> <div> <div></div> <div></div> <div></div> </div> </div> It has many elements, because I want it to be skinnable without limiting the skinners abilities. However, I am concerned about performance. Does having a lot of DOM elements refrect bad performance? Obviously there will always be an impact, but how great is that?

  Read the article

• How to extend abstract Entity class in RIA Services

  - by Calanus

  I want to add a bool variable and property to the base Entity class in my RIA services project so that it is available throughout all the entity objects but seem unable to work out how to do this. I know that adding properties to actual entities themselves is easy using .shared.cs and partial classes but adding such properties to the Entity class using similar methods doesn't work. For example, the following code doesn't work namespace System.ServiceModel.DomainServices.Client { public abstract partial class Entity { private bool auditRequired; public bool AuditRequired { get { return auditRequired; } set { auditRequired = value; } } } } All that happens is that the existing Entity class gets totally overriden rather than extending the Entity class. How do I extend the base Entity class so that functionality is available thoughout all derived entity classes?

  Read the article

• Syncing two AS3 NetStreams

  - by Lowgain

  I'm writing an app that requires an audio stream to be recording while a backing track is played. I have this working, but there is an inconsistent gap in between playback and record starting. I don't know if I can do anything to make the sync perfect every time, so I've been trying to track what time each stream starts so I can calculate the delay and trim it server-side. This also has proved to be a challenge as no events seem to be sent when a connection starts (as far as I know). I've tried using various properties like the streams' buffer sizes, etc. I'm thinking now that as my recorded audio is only mono, I may be able to put some kind of 'control signal' on the second stereo track which I could use to determine exactly when a sound starts recording (or stick the whole backing track in that channel so I can sync them that way). This leaves me with the new problem of properly injecting this sound into the NetStream. If anyone has any idea whether or not any of these ideas will work, how to execute them, or some alternatives, that would be extremely helpful! Been working on this issue for awhile

  Read the article

• Setting up Subsonic 3.0 on a ASP.NET web application on Visual Studio 2008

  - by Rob Paul

  I followed the steps on this tutorial video by at subsonic website. Everything seems to be self explanatory but when I copy the .tt files into my Visual Studio nothing happens. I have read other question relating to this problem on this website but they don't seem to fix this problem. I also went into the regedit to find out the generator key for .tt files and it is properly set. This is not a visual studio express or anything but a professional edition also I am trying to build a ASP.net web application and not a MVC application like the demo. Any help will be greatly appreciated. Thank You

  Read the article

• Wrong values reported by pyPDF for various box regions

  - by romor

  Using pyPdf, for most files I get matched results concerning various box's dimensions compared to what Acrobat reports. However for some files I get different values reported by pyPdf and Acrobat, like: pyPdf: artBox: 595.3 x 841.9 bleedBox: 595.3 x 841.9 cropBox: 595.3 x 841.9 trimBox: 517.3 x 754 Acrobat: artBox: 439.35 x 666.13 pt bleedBox: 439.35 x 666.13 pt cropBox: 439.35 x 666.13 pt trimBox: 439.35 x 666.13 pt I thought it's units issue, but then ratio between widths and heights doesn't match also, not mentioning trimBox mismatch Correct results are those reported by Acrobat of course. Does someone know why is this and is there a way I get correct dimensions by using pyPdf? Thanks couple of minutes later... After reading this question: Are PDF box coordinates relative or absolute? I figured I didn't considered uper left corner to be different then 0 (zero). It turned out that box starts at 77.95 x 87.87, so if we reduce reported values of trimBox by this values correct result is obtained. artBox: 0 x 0 bleedBox: 0 x 0 cropBox: 0 x 0 trimBox: 77.95 x 87.87 Other boxes seem with misleading values or I misinterpret them. Snippet: from pyPdf import PdfFileReader pdfread = PdfFileReader(file('my.pdf', 'rb')) page = 1 width = pdfread.getPage(page).trimBox[2]-pdfread.getPage(page).trimBox[0] height = pdfread.getPage(page).trimBox[3] - pdfread.getPage(page).trimBox[1] print width, height

  Read the article

• std::set<T>::erase(key). What if key isn't there?

  - by Armen Tsirunyan

  if I erase an element from an std::set and pass the key, not the iterator, and the key isn't in the set right now, will an exception be thrown? The thing is every second sentence in the MSDN documentation says: "this does blah blah, but it doesn't conform to the standard". So I need to know the standard behaviour. I just couldn't find it in the standard. Redirecting to the relevant clause will do as well. Thanks.

  Read the article

• Debug in Eclipse - ClassNotFoundException

  - by lmsasu

  Hi all, when i debug in Eclipse a simple console application, I get a lot of ClassNotFoundException lines in the debug Window. It is not an error, somewhat lower in another pane I get "Source not found.". I understand that it is because the source code of the required class is not available, buI would like to skip over these lines... I have to press a lot of times the "step over" or "step out" button to get out of these states. What can I do in order to avoid these useless lines at all? Thanks

  Read the article

• C++: is it safe to work with std::vectors as if they were arrays?

  - by peoro

  I need to have a fixed-size array of elements and to call on them functions that require to know about how they're placed in memory, in particular: functions like glVertexPointer, that needs to know where the vertices are, how distant they are one from the other and so on. In my case vertices would be members of the elements to store. to get the index of an element within this array, I'd prefer to avoid having an index field within my elements, but would rather play with pointers arithmetic (ie: index of Element *x will be x - & array[0]) -- btw, this sounds dirty to me: is it good practice or should I do something else? Is it safe to use std::vector for this? Something makes me think that an std::array would be more appropriate but: Constructor and destructor for my structure will be rarely called: I don't mind about such overhead. I'm going to set the std::vector capacity to size I need (the size that would use for an std::array, thus won't take any overhead due to sporadic reallocation. I don't mind a little space overhead for std::vector's internal structure. I could use the ability to resize the vector (or better: to have a size chosen during setup), and I think there's no way to do this with std::array, since its size is a template parameter (that's too bad: I could do that even with an old C-like array, just dynamically allocating it on the heap). If std::vector is fine for my purpose I'd like to know into details if it will have some runtime overhead with respect to std::array (or to a plain C array): I know that it'll call the default constructor for any element once I increase its size (but I guess this won't cost anything if my data has got an empty default constructor?), same for destructor. Anything else?

  Read the article

• Creating form using Generic_inlineformset_factory from the Model Form

  - by Prateek

  hello dear all, I wanted to create a edit form with the help of ModelForm. and my models contain a Generic relation b/w classes, so if any one could suggest me the view and a bit of template for the purpose I would be very thankful, as I am new to the language. My models look like:- class Employee(Person): nickname = models.CharField(_('nickname'), max_length=25, null=True, blank=True) blood_type = models.CharField(_('blood group'), max_length=3, null=True, blank=True, choices=BLOOD_TYPE_CHOICES) marital_status = models.CharField(_('marital status'), max_length=1, null=True, blank=True, choices=MARITAL_STATUS_CHOICES) nationality = CountryField(_('nationality'), default='IN', null=True, blank=True) about = models.TextField(_('about'), blank=True, null=True) dependent = models.ManyToManyField(Dependent, through='DependentRelationship') pan_card_number = models.CharField(_('PAN card number'), max_length=50, blank=True, null=True) policy_number = models.CharField(_('policy number'), max_length=50, null=True, blank=True) # code specific details user = models.OneToOneField(User, blank=True, null=True, verbose_name=_('user')) class Person(models.Model): """Person model""" title = models.CharField(_('title'), max_length=20, null=True, blank=True) first_name = models.CharField(_('first name'), max_length=100) middle_name = models.CharField(_('middle name'), max_length=100, null=True, blank=True) last_name = models.CharField(_('last name'), max_length=100, null=True, blank=True) suffix = models.CharField(_('suffix'), max_length=20, null=True, blank=True) slug = models.SlugField(_('slug'), max_length=50, unique=True) class PhoneNumber(models.Model) : phone_number = generic.GenericRelation('PhoneNumber') email_address = generic.GenericRelation('EmailAddress') address = generic.GenericRelation('Address') date_of_birth = models.DateField(_('date of birth'), null=True, blank=True) gender = models.CharField(_('gender'), max_length=1, null=True, blank=True, choices=GENDER_CHOICES) content_type = models.ForeignKey(ContentType, If anyone could suggest me a link or so. it would be a great help........

  Read the article

• Mocking an object that uses jni using EasyMock

  - by Visage

  So my class under test has code that looks braodly like this public void doSomething(int param) { Report report = new Report() ...do some calculations report.someMethod(someData) } my intention was to extract the construction of report into a protected method and override it to use a mock object that I could then test to ensure that someMethod had been called with the right data. So far so good. But Report isnt under my control, and to mkae things worse it uses JNI to load a library at runtime. If I do Report report = EasyMock.createMock(Report.class) then EasyMock attempts to use reflection to find out the class members, but this causes an attempt to load the JNI library, which fails (the JNI libraries are only available on UNIX). Im considering two things: a) Introduce a ReportWrapper interface with two implementations, one of which will delegate calls to an real Report (so basically a Proxy), and a second which will basically use a mock object. or b) instead of calling someMethod, call a protected method which will in turn call someMethod that I can override in a testing subclass. Either way it seems nasty. Any better ways?

  Read the article

• URL Encoding - Illegal Character Replacement

  - by ThePower

  Hi, I am doing some url redirections in a project that I am currently working on. I am new to web development and was wondering what the best practise was to remove any illegal path characters, such as ' ? etc. I'm hoping I don't have to resort to manually replacing each character with their encoded urls. I have tried UrlEncode and HTMLEncode, but UrlEncode doesn't cater for the ? and HTMLEncode doesn't cater for ' E.G. If I was to use the following: Dim name As String = "Dave's gone, why?" Dim url As String = String.Format("~/books/{0}/{1}/default.aspx", bookID, name) Response.Redirect(url) I've tried wrapping url like this: Dim encodedUrl As String = Server.UrlEncode(url) And Dim encodedUrl As String = Server.HTMLEncode(url) Thanks in advance. P.S. Happy Christmas

  Read the article

• How to change value by clicking radio buttons

  - by godistrue

  I am making a website in Adobe Dreamweaver with php. In the site there’s a 3 buttons for selecting payment method that will act as the continue button. What I want is when the user checks a radio buttons (I agree button), it will be add with that amount and display with previous amount.. there is three buttons which has the corresponding values(amount in pounds).. plz check my website http://www.spsmobile.co.uk in this linkgo to mobile phone unlocking and after add the cart click make payment it will go to next page there is a delivery mail details.. for that delivery mail details only am asking.. plz give some idea or code.. i tried but i can't get the result

  Read the article

• tar Cannot stat: No such file or directory

  - by VVP

  Hi all, I have got this error in during my mail server backup: 2010-09-16 06:24:20 ERROR backup of /var/mail/vhosts failed: tar: Removing leading `/' from member names tar: /var/mail/vhosts/host-name/0/user-name/.maildir/cur/1284588471.Vfd00I16e0223M187263.server.host-name\:2,: Cannot stat: No such file or directory tar: /var/mail/vhosts/host-name/0/user-name/.maildir/cur/1284587441.Vfd00I16e0220M85965.server.host-name\:2,: Cannot stat: No such file or directory tar: /var/mail/vhosts/host-name/0/user-name/.maildir/cur/1284588863.Vfd00I16e0225M370937.server.host-name\:2,: Cannot stat: No such file or directory tar: /var/mail/vhosts/host-name/0/user-name/.maildir/cur/1284602404.Vfd00I16e022aM416444.server.host-name\:2,: Cannot stat: No such file or directory tar: /var/mail/vhosts/host-name/0/user-name/.maildir/cur/1284594551.Vfd00I16e0228M678444.server.host-name\:2,: Cannot stat: No such file or directory tar: /var/mail/vhosts/host-name/0/user-name/.maildir/cur/1284588944.Vfd00I16e0226M622591.server.host-name\:2,: Cannot stat: No such file or directory tar: /var/mail/vhosts/host-name/0/user-name/.maildir/cur/1284587271.Vfd00I16e021fM96119.server.host-name\:2,: Cannot stat: No such file or directory tar: /var/mail/vhosts/host-name/0/user-name/.maildir/cur/1284599458.Vfd00I16e0229M181400.server.host-name\:2,: Cannot stat: No such file or directory tar: Error exit delayed from previous errors Is it happened because user deleted his messages? Is there any way how to prevent this? Well I am assuming it can be happened not only with e-mail backup. Can I rely on tar & gzip as a mail backup system?

  Read the article

• Postfix character encoding?

  - by Camran

  I use Postfix as a mailserver. I have Ubuntu OS. Then I use PHP to send emails. Problem is that none of my emails are encoded properly by a mailsoftware which my VPS provider uses. According to them, the problem lies with me. It is only the name field which isn't encoded properly. For example "Björn" becomes "Björn" in my emails. However, when I echo the $name, it outputs "Björn" which is correct. Also, gmail and hotmail does show it correctly. The strange part is that the "text" (the message itself) is encoded properly. I use the following for sending mail: $headers="MIME-Version: 1.0"."\n"; $headers.="Content-type: text/plain; charset=UTF-8"."\n"; $headers.="From: $name <$email>"."\n"; $name= iconv(mb_detect_encoding($name), "UTF-8//IGNORE//TRANSLIT", $name); //// I HAVE TRIED WITH AND WITHOUT THE LINE ABOVE, NO DIFFERENCE mail($to, '=?UTF-8?B?'.base64_encode($subject).'?=', $text, $headers, '[email protected]'); I have tried with and without the iconv line also, no luck. The last thing I can think of is POSTFIX, could there be a setting for character encoding there? Anybody knows?

  Read the article

• How to configure QoS on home router

  - by Joril

  I have a USR9105 router and I'd like to configure its QoS to prioritize web traffic (browser) over everything else (e.g. torrents). I'm confused by its interface though: "IP precedence" allows selecting a number from 0 to 7, while "IP type of service" can be one of "Normal Service", "Minimize cost", "Maximize reliability", "Maximize throughput" and "Minimize delay". How should I set it up? Is QoS the wrong solution to avoiding torrents slowing down browsing to a crawl? Should I set up a proxy and traffic shaping instead?

  Read the article

• How to restore a VirtualBox image given the .vdi file

  - by Ramon Tayag

  Background I have VirtualBox on Linux and recently the drive with the system files failed on me. I'm able to use the Live CD to view the files of the storage drive, and through this, I can copy my data files to another computer while I work on this one. How do I load the .vdi in another computer (or in this case, the fresh install of Ubuntu)? I see many samples online of how to export it, but it assumes the host is currently working. Thanks!

  Read the article

• rename/delete a folder from multipart rar file

  - by kikio

  Hello. I've a question: (I sent it in past) I have multipart rar file. Their contents are: file.part01.rar: myfolder (is a folder) data.cab -- file.part02.rar: myfolder (is a folder) data.cab <- file.part03.rar: myfolder (is a folder) data.cab <- file.part04.rar: difffolder (is a folder) anfolder (is a folder) data.cab <- file.part05.rar: myfolder (is a folder) data.cab <-- I want to extract it, so I right-click on "file.part01.rar" and select "Extract to ...". It extract 3 files, but in part 4, WinRAR said: "CRC. This file is currput." I think it problem is in the folders name in part04.rar. Is there anyway to rename folders in part04.rar? and cut "data.cab" from "afolder" to "difffolder". I really need it!! it is very emergency!!!!!!!! Thank you .....

  Read the article

• Windows Live Family Safety Service keeps closing Start Menu

  - by Jim McKeeth

  Got my kids a new Toshiba Laptop for Christmas. I was setting it all up for them so it would be ready to go. Tonight I installed Windows Live Family Safety Parental Controls. In the process of testing I discovered that on all the accounts the Start Menu closes automatically within 3 seconds (or less) of opening. It seems that it happens every 3 seconds, so sometimes it is immediate, and if I open it again then it will stay open for a full 3 seconds. This of course is rather annoying, and I need to wrap it up so it is ready to go under the tree. I disabled the Windows Live Family Safety Service, and that fixed it. Enable it again and the behavior returns. Is this a feature of the service? Can I disable that feature and keep the other features?

  Read the article

• How can I stream video from my XP sp3 desktop to my win 7 laptop?

  - by Robb

  I would like to stream media from my XP sp3 desktop to my Win7 laptop. I currently have Windows Media Player 11 on both machines. The XP one is set up for the media sharing service as far as I can tell. I have also set the 'Play To' option to my Win 7 machine on the XP WMP. However, the only way I've been able to 'stream' is to simply tell my Win7 WMP to add a network folder to its libraries. This seems to work over the wifi but it does stutter a touch, even with a 20 second buffer. The stuttering also appears randomly, maybe 4-5 times during a 22 minute show. I feel like I'm doing something wrong. Is this setup OK or am I missing something?

  Read the article

• Google Contacts/Calendars + Address Book + iCal: built-in sync (problems) or Exchange sync?

  - by jtbandes

  (I've looked at a few other questions related to this, but I've only found old questions with people saying that they're having problems, or anticipating Snow Leopard fixing them; no recent updates.) I'm looking to sync my Google Contacts & Calendars, and Gmail, with my Mac & iPhone. The iPhone I have currently set up thus: IMAP for Mail Exchange (Google Sync) for Contacts & Calendars The Mac: Address Book: built-in sync iCal: CalDAV, configured as a Google account I haven't been syncing Gmail to Apple Mail, because I was having weird IMAP glitches every so often that just got to annoying. Will Exchange / Google Sync work for this at all? Any suggestions there? Here are the other problems I'm having. Address Book only syncs certain fields (for example, Birthdays don't sync at all). I believe this is a list of the information that's synced. Address Book's "Synchronize with Google" checkbox doesn't stay checked when I quit Address Book. I think iCal is working fine, for the most part. Any suggestions on how to improve this setup? Why doesn't Address Book / Google Contacts sync stay enabled? Could I use Exchange for it like I am on the iPhone? Will that sync all the fields, including Birthdays, etc.? Thanks in advance!

  Read the article

• how to escape a string before insert or update in Ruby

  - by ywenbo

  Hi guy, In ruby ActiveRecord doesn't provide dynamic binding for update and insert sqls, of course i can use raw sql, but that need maintain connection, so i want to know if there is simpler way to escape update or insert sql before executing like code below: ActiveRecord::Base.connection.insert(sql) i think i can write code by gsub, but i know if there has been a ready method to do it. thank you very much, and Merry Christmas for you all.

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >