Monthly Archives

Articles indexed in July 2012

Page 127/169 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• OpenVPN and brouting issue

  - by JavierMartinz

  I have a Guest XEN Machine in which I want to connect by OpenVPN to other network. But I have this problem: when I want to connect to that OpenVPN I get a lot of TLS handshake errors because I think that the packages did not come rightly. When, at the end, the guest machine achieve to connect (after several tries) I can't ping the other machines of the OpenVPN network. Except sometimes, where if I ping 20 times MAYBE i get ping-answer in 1-2 times. I think that this problem is related about how the HOST Xen machine 'filters' the packages to the bridge. I mean, I think that all the outgoing guest machines packages are good but the incoming traffic to the guests is not recognized well. How could I detect/solve the problem? Im using Debian Linux in both machines

  Read the article

• Configuring IIS site to use HTTPS

  - by James

  I am working on a REST API which I have currently deployed on a Win XP Professional SP2 development machine running IIS 5.1. The site is currently being hosted on port 81 and being accessed via HTTP. I would now like to configure the site to stop using HTTP and use HTTPS only. I have developed a self-signed certificate using the SelfSSL.exe tool from the 6.0 Resource Kit Tools and set the Common Name to be the IP of my server (as it's a local development machine it has no domain name). I have also already configured the site to use SSL using the How To Set Up an HTTPS Service in IIS tutorial as my guide. However, whenever I try to access a resource in the API via HTTPS I get a 404. Any ideas?

  Read the article

• memory usage setting

  - by user127610

  everybody,the memory usage is too much,what can i do? top - 12:54:37 up 7 days, 4:38, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 18 total, 2 running, 16 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048800k total, 917424k used, 131376k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2840 1364 1204 S 0.0 0.1 0:02.17 init 1161 root 14 -4 2320 600 420 S 0.0 0.1 0:00.00 udevd 1391 root 18 0 35512 1288 948 S 0.0 0.1 0:03.53 rsyslogd 1409 root 15 0 8432 1164 700 S 0.0 0.1 0:03.87 sshd 1416 root 18 0 3156 868 692 S 0.0 0.1 0:00.00 xinetd 1423 root 18 0 8672 716 292 S 0.0 0.1 0:00.00 saslauthd 1424 root 18 0 8672 488 64 S 0.0 0.0 0:00.00 saslauthd 1431 root 15 0 7020 1168 616 S 0.0 0.1 0:00.99 crond 1450 root 25 0 6236 1444 1228 S 0.0 0.1 0:00.05 sh 3328 mysql 15 0 799m 42m 4892 S 0.0 4.1 0:02.07 mysqld 15479 root 15 0 11304 3332 2688 R 0.0 0.3 0:00.06 sshd 15482 root 15 0 6372 1688 1404 S 0.0 0.2 0:00.00 bash 15497 root 15 0 2536 1044 864 R 0.0 0.1 0:00.00 top 20137 www 15 0 20672 14m 864 S 0.0 1.4 0:00.87 nginx 22351 www 16 0 52324 26m 9244 S 0.0 2.6 0:13.94 php-fpm 24231 www 16 0 51928 25m 9260 S 0.0 2.5 0:13.52 php-fpm 32682 root 15 0 35832 3228 864 S 0.0 0.3 0:02.18 php-fpm 32686 root 18 0 7368 1616 888 S 0.0 0.2 0:00.00 nginx

  Read the article

• GPO - Setting not applied, although policy is applied

  - by Kenny Bones

  This is rather strange. In our domain we have several terminal servers and this morning a user reported that no drives are mapped when he logs on to the terminal server. So, I checked Group Policy Results and compare two users. Both users have the exact same policies applied. But for this particular user, the Script section under User Configuration - Policies - Windows Settings is just not there. For the other user, which this is working fine for, it says under the Script section that Winning GPO is Terminal2008, which is the GPO that contains the script section. And the Terminal2008 GPO is applied to both users. Also, the loopback processing is set to Replace. What could be the cause for this? I've never seen this particular issue before. I mean, both users are in the same OU, they log on to the same terminal server and the same policies are applied to both. They do not however have the exact same group memberships, but should that matter? It's not stated that the script should be run only if the user is a member of a certain group either. Not sure if that could be done through that specific setting either.All I know is, the very same policies are applied to both users, in the same OU and the same computer. Meaning, the same policies should be applied? Edit: I just ran Group Policy Results on one of the other terminal servers, which are also in the same OU, and the Scripts section is there! This means that this particular user don't get this setting when he's logged onto this particular server. What could be the cause of this?

  Read the article

• Nagios service active only when other service is failing

  - by Laimoncijus

  Is is possible to define service to be active only the times while other service is failing? Consider following example: 2 hosts available: HostA (primary) and HostB (backup). Nagios service, which monitors amount of active connections to the host: gives OK when amount of connections to host 0 gives FAILURE when amount of connections to host = 0 If setup nagios service to monitor both hosts: HostA and HostB - it will give me OK for HostA (while it is primary and all connections normally goes to it) and FAIL for HostB (while it is backup and will receive no connections while HostA is alive). Can I make the nagios service for HostB somehow depend on sevice of HostA and give no failures (or maybe be inactive) up to the moment the service of HostA starts failing?

  Read the article

• Changing a set-cookie header using mod_rewrite/mod_proxy

  - by olrehm

  I have a bunch of cgi scripts, which are served using HTTPS. They can only be reached on the intranet, not from the outside. They set a cookie with the attribute 'Secure', so that it can only be send via HTTPS. There is also a reverse proxy to one of these scripts, unfortunately using plain HTTP. When a response comes in from my cgi-script with a secure cookie, it is not being passed on via HTTP (after all, that is what that attribute is for). I need however, an exception to this rule. Is it possible to use mod_rewrite/mod_proxy or something similar, to change the set-cookie header in the response coming from my cgi script and remove the Secure, such that the cookie can be passed back to the user using the unsafe HTTP connection? I understand that this defeats the purpose of the Secure in the first place, but I need this as a temporary work around. I have searched the web and found how to add a set-cookie header using mod_rewrite, and I have also found how to retrieve the value of a cookie coming from the client in a cookie header. What I have not yet found is how to extract the set-cookie header received in the response of a script I am proxying for. Is that possible? How would I do that? Ole

  Read the article

• Substiting a line through PHP in SSH

  - by Asad Moeen

  I've already setup SSH usage in PHP and most of the things work. Now what I want to do is that I'm looking to edit a line in a file and replace it back. It works directly on the server but can't seem to get it working with PHP files. Here is what I'm trying. $new_line1 = 'Line $I want to add - The $I has to go into the file as it is'; $new_line2 = 'Ending $text of the line - $text again goes into file; $query = "Addition to line"; $exec1= 'cd /root; perl -pe "s/.*/' ; $exec2= '/ if $. == 37" Edit.sh > Edited.sh'; $new="$exec1$new_line1$query$new_line2$exec2"; $edit="cd /root/mp; cp Edited.sh Edit.sh"; echo $ssh->exec($new); echo $ssh->exec($edit); Now the thing is that running the perl command directly in SSH works without any errors but when I run this through PHP I get the error: Substitution replacement not terminated at -e line 1. I want to know why would it work this way and not that?

  Read the article

• MySQL ADO.NET Connector & MSSQL Integration Services

  - by user1114330

  Here I am, day three... attempting to sync a data view on a Windows Vista box (64 bit) running MSSQL 2012 and Visual Studio 2010. Sanity is slipping and hunger for progress fills my attention. I went through hell trying to get the MySQL ODBC drivers to get the job but to no avail...everyone seems to be lost and all the threads I can find are solutions that do not work for me. The problem: System DSN's not being seen by SSIS. SSIS DSN Not Showing as ODBC Data Source I make the decision to try out the ADO.NET connector...and to my surprise it is actually in the selection list in data sources in SSIS. So I take off running to create a Data Flow Task, create an ADO.NET Source (a local MSSQL DB)...all is good as usual. Then I move swiftly to creating a ADO.NET Destination, enter my credentials...wow, I am selecting a database finally on my linux server! Happy thinking that I finally have figured a way to get the job done. Then I move to mappings...nope, something is wrong...I am getting an error that hurts my eyes: Pipeline component has returned HRESULT error code 0xC0208457 from a a method call. Error at Data Flow Task [ADO NET Destination [81]]: Failed to get properties of external columns. The table name you entered may not exist or you do not have SELECT permission on the table object and an alternative attempt to get column properties through connection has failed. Detailed error messages are" You have an error in your SQL syntax check the manual that corresponds to your MySQL server version for the right syntax to use near "database".tablename" at line 1. The descriptor files on path C:\Program Files (x86)\Microsoft SQL Server\110\DTS\ProviderDescriptors\ does not contain schema information for connection of type MySQL.Data.MySqlClient.MySqlConnection. So it looks like it can't the information and therefore I cannot map the tables properly. Any ideas on this would be ultra helpful...thanks in advance to All!

  Read the article

• Howto find internal IP server by external IP

  - by HWTech

  I've got 12 servers in datacenter, but can login by SSH into one of them (facade server), other servers available only from it. In hosts file we have ip list each of available servers. milkov@devel:/var/www/davel$ cat /etc/hosts 192.168.1.4 data1 192.168.1.7 data2 192.168.1.5 bground1 192.168.1.6 bground2 192.168.1.10 frontend1 192.168.1.11 frontend2 ... Also I've domain megaplan.tvigle.ru (IP 79.142.100.36). Question: How to know which one of servers serve this domain? How to find servers internal ip-address by external IP. PS: Sorry about my Eng. lng

  Read the article

• How can I too many files upload more fast way to Cloud files in Rasckspace?

  - by andy kim

  I have a lot of image files, it's all I want to upload to RackSpace cloud files about a million in a single directory the fastest and most efficient way. but I'm use uploading python-cloudfiles script is very slow and I want to know different ways or python script code. because one by one connection upload is very slow. I think one files tar and uncompress directory is better way. but cloudfiles do not support this way. Who know any other way?

  Read the article

• Troubleshooting Website problems within the local network

  - by HaydnWVN

  Have an external website which opens fine on some PC's, yet seems to time out (or symptoms of timing out, but never actually does) on others. Seems to only affect (some) of our newer HP Pro 3305 MT Workstations. All of which are running Win7 32bit SP1 with all updates. Older PC's (Win7 32bit SP1 & WinXP) are unaffected. Using Google Chrome & Firefox makes no difference. Opening the website in IE9 Compatibility Mode has exactly the same symptoms. All PC's are on the same local network (Workgroup) using the same DNS server & gateway (inhouse) on the same internet connection, on the same subnet. There is no proxy server, no content filtering, no load balancing etc etc. Only group policy in effect (locally) is for Update scheduling. Local firewalls are all the same (Kaspersky WP4) and our external facing firewall has no IP specific settings. I have no control over the external website, traceroute shows the same destination on all PC's. It is a fairly popular website in our industry (Horticulture) and i'm not aware of any other people (even other sites within our sister companies) with the same problem. Update: Used Fiddler2 to monitor the HTTP request, seems its not getting fulfilled for some reason?! Request sent: GET http://www.rhs.org.uk/ HTTP/1.1 Host: www.rhs.org.uk Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-GB,en-US;q=0.8,en;q=0.6 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Log from Fiddler 2 of the request: This session is not yet complete. Press F5 to refresh when session is complete for updated statistics. Request Count: 1 Bytes Sent: 567 (headers:567; body:0) Bytes Received: 0 (headers:0; body:0) ACTUAL PERFORMANCE -------------- ClientConnected: 17:02:33.720 ClientBeginRequest: 17:02:39.118 GotRequestHeaders: 17:02:39.118 ClientDoneRequest: 17:02:39.118 Determine Gateway: 0ms DNS Lookup: 0ms TCP/IP Connect: 46ms HTTPS Handshake: 0ms ServerConnected: 17:02:39.165 FiddlerBeginRequest: 17:02:39.165 ServerGotRequest: 17:02:39.165 ServerBeginResponse: 00:00:00.000 GotResponseHeaders: 00:00:00.000 ServerDoneResponse: 00:00:00.000 ClientBeginResponse: 00:00:00.000 ClientDoneResponse: 00:00:00.000 RESPONSE BYTES (by Content-Type) -------------- ~headers~: 0 Log of a successful request from a working PC (done this morning, excuse the timestamps being different from above): Request Count: 1 Bytes Sent: 493 (headers:493; body:0) Bytes Received: 20,413 (headers:525; body:19,888) ACTUAL PERFORMANCE -------------- ClientConnected: 08:22:47.766 ClientBeginRequest: 08:22:47.766 GotRequestHeaders: 08:22:47.766 ClientDoneRequest: 08:22:47.766 Determine Gateway: 0ms DNS Lookup: 26ms TCP/IP Connect: 30ms HTTPS Handshake: 0ms ServerConnected: 08:22:47.828 FiddlerBeginRequest: 08:22:47.828 ServerGotRequest: 08:22:47.828 ServerBeginResponse: 08:22:48.905 GotResponseHeaders: 08:22:48.905 ServerDoneResponse: 08:22:48.905 ClientBeginResponse: 08:22:48.905 ClientDoneResponse: 08:22:48.905 Overall Elapsed: 00:00:01.1388020 RESPONSE BYTES (by Content-Type) -------------- text/html: 19,888 ~headers~: 525 So my question has evolved into: What is the difference between the 2 requests and how do I determine why 1 PC is not getting a reply to it's GET request?

  Read the article

• NRPE: Unable to read output with check_connections plugin

  - by Wlodzimierz

  I'm using plugin which gives me warning or crtis with established connections. If I run it on local machine it gives: *root@graber:/usr/lib/nagios/plugins# ./check_connections -w 1 -c 5 -C sshd CRITICAL Established connections: 6* I know, I run as root. But: Rights to the file: root@graber:/usr/lib/nagios/plugins# ls -all check_connections -rwxr-xr-x 1 nagios nagios 5459 2012-07-06 10:19 check_connections /etc/sudoers: root@graber:/usr/lib/nagios/plugins# cat /etc/sudoers Defaults env_reset root ALL=(ALL:ALL) ALL %admin ALL=(ALL) ALL nagios ALL=(ALL) NOPASSWD: /usr/bin/lsof nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/ /etc/nagios/nrpe.cfg: *nrpe_user=nagios nrpe_group=nagios* *dont_blame_nrpe=1* *command_prefix=/usr/bin/sudo command[check_connections]=/usr/lib/nagios/plugins/check_connections -w 1 -c 5 -C sshd* log from remote: *2012-07-06T11:12:49+02:00 graber nrpe[25928]: Handling the connection... 2012-07-06T11:12:49+02:00 graber nrpe[25928]: Host address is in allowed_hosts 2012-07-06T11:12:49+02:00 graber nrpe[25928]: Host is asking for command 'check_connections' to be run... 2012-07-06T11:12:49+02:00 graber nrpe[25928]: Running command: /usr/lib/nagios/plugins/check_connections -w 1 -c 5 -C sshd 2012-07-06T11:19:11+02:00 graber nrpe[26100]: Return Code: 2, Output: NRPE: Unable to read output* Why is this happening? I'm out of ideas, I've searched google for 2 days now :)

  Read the article

• How to select a user and remove all groups they are a member of using Powershell (with Quest)?

  - by Don

  I've read quite a bit online about this and thought I had found a solution, but it doesn't seem to be working like I would expect. I am wanting to get a user based on the username I input, then remove all groups that it is a member of. Basically the same thing as going into ADUC, selecting the user, selecting the Member Of tab, highlighting everything (except domain users of course) and selecting remove. Here's the command I'm trying to use: Get-QADUser -Name $username | Remove-QADMemberOf -RemoveAll Others have said online that it works for them, but so far it hasn't for me. It doesn't give an error, it accepts the command just fine, but when I look in ADUC, the groups are still there for the user. Any suggestions as to what I may be doing wrong? Executing from Windows 7 with domain admin rights, Exchange cmdlets and Quest snapin loaded. Thanks!

  Read the article

• Debian Linux server hangs after a week or so

  - by Alex Flo

  I have 2 Debian Linux 6.0.4 servers that have a strange behaviour: after 5-7-10 days they hang. By this I mean the servers need to be restarted and before that ping won't answer. I've been struggling with this problem for a couple of months now and here's some thoughts/what I tried without being able to solve the problem. I changed the RAM on a server. Being 2 different servers I doubt that it could be something related to hardware as a 3rd identical server won't have this problem. I logged the server load and when it crashes the load is fine (quite low) I cannot find anything in the server logs, logs are fine till the server freezes. I don't have access to console unfortunately. While I have years of admin experience I have never encountered such an issue and right now I have no idea where else to investigate. If you have an idea of what I could try in order to fix the problem please share it with me:-)

  Read the article

• What is the most secure way to allow a user read access to a log file?

  - by gAMBOOKa

  My application requires read access to /var/log/messages, which belongs to user and group root. What is the minimal exposure level required on /var/log/messages so my application can read it? Presently, my plan is to change the group ownership of /var/log/messages to a new group, and add root and my application user to it, but this would also give the application write privileges to /var/log/messages. OS: Centos 5.5

  Read the article

• Host is missing hostname and/or domain

  - by anlawang

  i use puppet 0.25.4 on ubuntu 10.04,when puppet installed ,i got the infor below : Nov 29 10:30:30 puppet puppetmasterd[4422]: Host is missing hostname and/or domain: pclient.example.com Nov 29 10:30:30 puppet puppetmasterd[4422]: Compiled catalog for pclient.example.com in 0.02 seconds i dont know how to fix it ,who can help me thank you ! my configuration : I use apt-get to install the puppet,so some configuration have been fixed puppet.conf on client : > [main] server=puppet.example.com > logdir=/var/log/puppet > vardir=/var/lib/puppet > ssldir=/var/lib/puppet/ssl > rundir=/var/run/puppet > factpath=$vardir/lib/facter > pluginsync=false > templatedir=$confdir/templates > prerun_command=/etc/puppet/etckeeper-commit-pre > postrun_command=/etc/puppet/etckeeper-commit-post > certname=pclient.example.com > node_name=cert [puppetd] > runinterval=30 puppet.conf on server: > [main] logdir=/var/log/puppet > vardir=/var/lib/puppet > ssldir=/var/lib/puppet/ssl > rundir=/var/run/puppet > factpath=$vardir/lib/facter > pluginsync=true > templatedir=$confdir/templates > prerun_command=/etc/puppet/etckeeper-commit-pre > postrun_command=/etc/puppet/etckeeper-commit-post i user the default node on site.pp i am a newer to puppet,so i dont know the reason for these problems!! thank you again!!!

  Read the article

• Script to restart BlackBerry services

  - by ICTdesk.net

  Can somebody give me a script advice/example of how to restart services? I have to restart 17 services, but the first 4 services have to be in the right order and after the restart command is given to one of the services, the next one should be started when the previous one is finished. I know I can restart a service by net command, and I can build a delay by for example a ping command that repeats for an x amount of times, but I never know in advance how long it is going to take for a service to restart. Thanks, Kindest regards, Marcel

  Read the article

• Ubuntu 9.10 RSA authentication: ssh fails, filezilla runs fine

  - by MariusPontmercy

  This is quite a mistery for me. I usually use passwordless RSA authentication to login into my remote *nix servers with ssh and sftp. Never had any problem until now. I cannot connect to an Ubuntu 9.10 machine: user@myclient$ ssh -i .ssh/Ganymede_key [email protected] [...] debug1: Host 'ganymede.server.com' is known and matches the RSA host key. debug1: Found key in /home/user/.ssh/known_hosts:14 debug2: bits set: 494/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: .ssh/Ganymede_key (0xb96a0ef8) debug2: key: .ssh/Ganymede_key ((nil)) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: .ssh/Ganymede_key debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: .ssh/Ganymede_key debug1: read PEM private key done: type RSA debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug2: we did not send a packet, disable method debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Then it falls back to password authentication. If I disable password authentication on the remote machine my connection attempt just fails with a "Permission denied (publickey)." state. Same thing for sftp from command line. The "funny" thing is that the exact same RSA key works like a charm with a Filezilla sftp session instead: 12:08:00 Trace: Offered public key from "/home/user/.filezilla/keys/Ganymede_key" 12:08:00 Trace: Offer of public key accepted, trying to authenticate using it. 12:08:01 Trace: Access granted 12:08:01 Trace: Opened channel for session 12:08:01 Trace: Started a shell/command 12:08:01 Status: Connected to ganymede.server.com 12:08:02 Trace: CSftpControlSocket::ConnectParseResponse() 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Status: Retrieving directory listing... 12:08:02 Trace: CSftpControlSocket::SendNextCommand() 12:08:02 Trace: CSftpControlSocket::ChangeDirSend() 12:08:02 Command: pwd 12:08:02 Response: Current directory is: "/root" 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Trace: CSftpControlSocket::ParseSubcommandResult(0) 12:08:02 Trace: CSftpControlSocket::ListSubcommandResult() 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Status: Directory listing successful Any thoughts? M

  Read the article

• Program for remove exact duplicate files while caching search results

  - by John Thomas

  We need a Windows 7 program to remove/check the duplicates but our situation is somewhat different than the standard one for which there are enough programs. We have a fairly large static archive (collection) of photos spread on several disks. Let's call them Disk A..M. We have also some disks (let's call them Disk 1..9) which contain some duplicates which are to be found on disks A..M. We want to add to our collection new disks (N, O, P... aso.) which will contain the photos from disks 1..9 but, of course, we don't want to have any photos two (or more) times. Of course, theoretically, the task can be solved with a regular file duplicate remover but the time needed will be very big. Ideally, AFAIS now, the real solution would be a program which will scan the disks A..M, store the file sizes/hashes of the photos in an indexed database/file(s) and will check the new disks (1..9) against this database. However I have hard time to find such a program (if exists). Other things to note: we consider that the Disks A..M (the collection) doesn't have any duplicates on them the file names might be changed we aren't interested in approximated (fuzzy) comparison which can be found in some photo comparing programs. We hunt for exact duplicate files. we aren't afraid of command line. :-) we need to work on Win7/XP we prefer (of course) to be freeware TIA for any suggestions, John Th.

  Read the article

• linux installation cd enviroment

  - by haw3d

  i recently make a custom linux system, for my special need. its on my HDD, but i want to create a cd for installation. multiple day ego, i found a livecd and create install script for that, but in power failure my HDD is gone, and i cant found that live cd again. my install script is based on recoverin tar.gz backup. my requorement is: based on glibc (not uclibc) recognize every devices have you any suggestion? excuse me for my bad english.

  Read the article

• After exiting, the home folder cannot be visited?

  - by Keating Wang

  I ssh to a ubuntu sever, start a web project(Rails), then I can visit this project. I close the the ssh terminal, then the project says can not find files(view pages,css files and so on). I put the project in the home folder(/home/byht). why? When closing the ssh terminal, the user's folder can not be visited ? You know, when I put the project in another folder(/usr/local), everything goes well.

  Read the article

• What does the fan speed sensor really report?

  - by T. Verron

  I have an overheating issue on my netbook (ASUS EeePC 1015PW), which I'm trying to troubleshoot. Using lm-sensors while overheating gave me this output : acpitz-virtual-0 Adapter: Virtual device temp1: +86.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4089 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +82.0°C (crit = +100.0°C) Core 1: +80.0°C (crit = +100.0°C) But I can't hear the fan. So I enabled manual pwm controling and set the fan to full speed, and after a few minutes I got this output : acpitz-virtual-0 Adapter: Virtual device temp1: +65.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4016 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +62.0°C (crit = +100.0°C) Core 1: +58.0°C (crit = +100.0°C) And this time I could hear the fan spinning. So there's quite obviously an issue with either fan control or fan monitoring. Hence the question : what kind of physical information does the fan sensor really report? Thank you PS. I should have added that the computer is a small, hard-to-disassemble netbook, so I can't and don't want to try experiments like "block the fan and see what the sensor reports".

  Read the article

• Filter tagged threads in Thunderbird

  - by Let_Me_Be

  I have a big issue with Thunderbird, I need to process a lot of emails coming from request tracking system. Since only few of those apply to me personally, I tag these threads with appropriate tags. The issue now is that I would like to filter out threads, that do apply to me and those that I haven't tagged yet. I'm unable to do this, because new emails keep arriving into the already existing threads, and of course, these new emails don't get the tags. Basically I would need some sort of filtering rule, that would apply not to a specific message, but the master message in the thread. Is there some possibility to create such filters, or is there some other facility, that would allow me to do the same? Tags are great, since they are actually saved into the messages and correctly sync across multiple machines when using IMAP.

  Read the article

• Put Google Chrome, AVG on a flash drive

  - by duncan12

  I often install programs on others' computers such as LibreOffice, which, when they only have a dial-up connection, takes forever to download. So instead I keep it on a flash drive and install it from there. This works fine for LibreOffice. However, some programs, when you download them all you are downloading is a downloader - when you download ChromeSetup and open it, a installer window opens which actually downloads Chrome. Dial-up users then see that it will take 4 hours. Another example is AVG free antivirus - you download an installer, which when opened actually downloads AVG. However this doesn't work too well for dial-up users. How do I put the entire program of things like Chrome and AVG on a flash drive for fast installation on others' slow connections?

  Read the article

• Samba domain controller: remove 1 Windows client

  - by K B

  my domain is controlled by a Samba domain controller running on openSUSE 11.3. It manages other openSUSE boxes and some Windows 7 boxes. Now one harddisk of a Windows 7 computer crashed and I had to reinstall. I wasn't able to get the computer name ("Win26") of the broken PC out of the domain and so I couldn't add the reinstalled "Win26" to the domain again. So how can I remove the entry of the old "Win26" computer out of the domain controller, so that I can add the new "Win26" to the domain again? Is it one configuration file I have to edit and restart Samba? Which file would this be? Thanks in advance for your help! Regards, KB

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >