Daily Archives

Articles indexed Saturday June 23 2012

Page 14/15 | < Previous Page | 10 11 12 13 14 15  | Next Page >

• Centrino Wireless-N 1000 takes forever to connect and keeps asking for password

  - by waclock

  A few days ago I started having this problem. When I tried to connect to any WiFi Connection it would stay connecting forever, and after a minute or so it would ask me for the password again. The strange thing is that this happened out of nowhere, I did not install any new drivers or anything like that. After this happened I decided to uninstall ubuntu and install it again ("inside windows") but the problem is still there. Any suggestions would be greatly appreciated. 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:aa:e4:7d size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:50 ioport:4000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:09:9c:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic-pae firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:52 memory:c4500000-c4501fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.2 logical name: eth1 serial: ee:85:2f:7d:80:96 capabilities: ethernet physical configuration: broadcast=yes driver=ipheth ip=172.20.10.2 link=yes multicast=yes

  Read the article

• How do I show an animated gif in the app I am developing?

  - by Agmenor

  I am developing Discvur, a simple Imgur viewer, for the Ubuntu App Showdown. Therefore I use quickly + Glade + Gtk + Python. PyGObject instead of PyGtk would be highly appreciated. I would like to display some animated gifs in my program. What I tried was inserting a viewport, then an image, and then in the 'Edit Image' field I selected a gif animation (in my case "../media/akO1i.gif"). When I run my app, the gif is displayed but it is not moving (I only see the first frame). Is it possible to show animated gifs in my app? What is the best and/or easiest way to do it: use the image widget, or a WebKit field, or something else?

  Read the article

• No boot option after installing Ubuntu 12.04 LTS on Acer Aspire 4736z with Live CD

  - by utamaku

  I am facing a problem. After installing Ubuntu 12.04 LTS using Live CD, at the reboot there is no boot option to choose the OS. I directly get logged into my Windows 7. Before that i was having an issue with the 'nomodeset' if not mistaken .After ticking [x] on the nomodeset, i can install my Ubuntu, but got stucked again at choosing the partition option. So i did 2 partitions for Ubuntu, 1 partition as ext3 for / and the other 1 for swap. Which enabled to proceed until the finished installation dialogue, and after that system wants to reboot .It takes some time and gets stuck at the screen doing nothing, doesn't reboot at all. I did forced shutdown then rebooted again which directly logs me in windows 7 without boot option. In win7 the partitions for Ubuntu is gone. I tried the boot-repair thing and it doesn't help .It just shows up the _ Blank Cursor (terminal thing i guess). I typed boot repair but still the same result. I am using Acer Aspire 4736z. Please somebody help me with this issue.

  Read the article

• After installing Ubuntu using WUBI, starting Ubuntu does not get further than the GRUB prompt

  - by Kris Everett

  I'm trying to install Ubuntu. I put Ubuntu on a USB flash drive using the WUBI installer. I get to where it finishes the install and it wants me to reboot. But when I reboot and then select Ubuntu, I get a black screen that says GNU GRUB version 1.99-21ubuntu3 Minimal BASH-like editing is supported. for the first word. TAB lists possible command completions. Anywhere else TAB lists possible device or file completions. Grub> When I type in some commands it says "Kernel not specified" and the rest of the commands give no feed back what so ever. What did i do wrong? Can anyone point me in the right direction. Please help this is very frustrating any help would be useful.

  Read the article

• How to add a printer in gnome-shell

  - by artfulrobot

  I'm using Gnome Shell (although I'm not sure whether the "Printers" app is part of that or just part of Gnome). I go to "Printers" from the overview, click the + button on the bottom left, choose network and then see a message "FirewallD is not running. Network printer detection needs services mdns, ipp, ipp-client and samba-client enabled on firewall.". It's not auto detected anything. There's an Address box and a Search by Address tickbox, but neither seem to do anything. I'm frustrated because I know all the details of the printer, but have nowhere to put them in. Automation is supposed to make things easier, no? For example I know the printer is at lpd://10.67.5.3/lp1 but I can't put this in anywhere. Is there a GUI that works, or have I misunderstood how to use it?

  Read the article

• How to correctly create a virtual file system?

  - by Paul

  A task in my homework assignment asks me to create a virtual file system, mount it, and perform some operations on it. I am supposed to create a file of 10 MB whose bits are all set to 0, format it as ext3 and mount it. This is how I've done that: dd if=/dev/zero of=~/filesyst bs=10485760 count=1 sudo mkfs.ext3 ~/filesyst sudo mount –o loop ~/filesyst /media/fuse Even though I've used /dev/sero, the file i still full of gibberish characters (mostly at-signs). The permissions on /media/fuse are drw-rw-rw- (which are alright), but the permissions on the files inside it are something like this: d????????? ? ? ? ? ? lost+found -????????? ? ? ? ? ? secret_bin Where have I gone wrong?

  Read the article

• How can you monitor internet download usage?

  - by dv3500ea

  Some broadband providers impose a monthly download limit, charging extra if you go over. It is also quite easy to exceed some of the lower limits just by installing/updating packages and 'normal' browsing (which to me includes streaming TV programs and movies). This means that you need to limit the amount you use the internet, yet it is hard to know when. The System Monitor helps a bit with this by giving a total received/total sent in the networking section of the Resources tab. However, this is reset every reboot. It would be good if there was a way to have a monthly total received so you can know how close you are to exceeding your limit and maybe even be given warnings if it looks like you are going to exceed the limits. Does anyone know of a way to achieve this?

  Read the article

• setting up mod_proxy - plesk, apache, .htacess?

  - by sam

  I want to set up mod_proxy to work so that my blog is running under a subdirectory of my site rather than subdomain so i get the seo backlink benefit. What im looking to do is get my tumblr blog which is running at blog.mysite.com (which is in turn mapped from myblog.tumblr.com) will be running on mysite.com/blog How can i set up mod_proxy to do this, is it just something that i can setup from inside of my .htacess file ? Ive got my site hosted on an apache server, using plesk as a controll panel. I contacted my webhost and they told me mod_rewrite could acheve it, they gave me this but said they wont provide me further support regarding mod_rewrite as its somthing they dont support <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{HTTP_HOST} ^example.co.uk/blog$ RewriteCond %{REQUEST_URI} !/standard RewriteRule ^(.*)$ http://example.tumblr.com$1 [R] </IfModule> ideally id like to use the mod_proxy method as it recomended from an seo point of view from this article http://www.seomoz.org/blog/what-is-a-reverse-proxy-and-how-can-it-help-my-seo

  Read the article

• fault tolerant uploading tool

  - by andersonbd1

  I'm setting up a wordpress site for a friend who has some somewhat large audio files (150M)... He's on a bad connection and I'd guess it'll take him a while to upload those files with the normal wordpress way. I'm looking for a tool that I can install on the server that allows uploads and is also fault tolerant... for example if you loses his connection, or power, or whatever it'll pick up where it left off. I realize web technologies probably don't do that, but perhaps flash or something? Any ideas?

  Read the article

• Google's process for publishing/modifying pages [closed]

  - by Glenn Dayton

  I'm assuming that a group of people at Google have control of certain sections of google.com, but how does Google make sure that employees don't accidentally or intentionally sabotage the website? Does Google use Adobe Contribute or some similar product for sharing/publishing the website. Do employees use WebDAV, FTP, SFTP, or SSH to publish the site. Since Google has hundreds of thousands of servers it probably takes some time for its servers to update. Do they transmit the new copy of the website to all servers before publishing at once? This question does not apply to Google editing a database and having a page reflect the database's changes. It applies to employees editing the source code and/ or back end of the site.

  Read the article

• What are the Consequences for using Relative Location Headers?

  - by Alan Storm

  According to the spec, Location headers used in a redirect require a server name HTTP/1.1 301 Moved Permanently ... Location: http://example.com/foo/baz/bar However, in 2012, most web browsers will recognize a relative path and redirect you to the new location using the original server name HTTP/1.1 301 Moved Permanently ... Location: /foo/baz/bar Are there any negative/surprising consequences to using the relative URLs in the Location headers? My particular concern is how Google/search-engines will interpret this, but if there's anything else I'm not thinking about I'd love to hear it.

  Read the article

• Need private personal access to ~three PHP pages

  - by Roger

  I would like secure access to the text output by three PHP scripts (the text output is JavaScript and html) . The security level is much less then financial data but important none-the-less. I have considered purchasing AND studying https and SSL certificates. Hostgator charges an extra $2/month for a private ip plus $50+ anually for a certificate. This is more then I want to spend for this project (time + money). Is there a simpler solution that is: less expensive easier to implement. I'm open to different approaches.

  Read the article

• Google Analytics Export API - nextPagePath data

  - by Btibert3

  I am probably missing something obvious, but I do not understand when I query: start.date = DATE_START, end.date = DATE_END, dimensions = c("ga:pagePath","ga:previousPagePath"), metrics = c("ga:pageviews"), filters = mypageofinterest, table.id = "ga:mytable", max.results=RESULTS my data return as expected, all of the previous pages including (entrance). However, when I modify the code to be nextPagePath start.date = DATE_START, end.date = DATE_END, dimensions = c("ga:pagePath","ga:nextPagePath"), metrics = c("ga:pageviews"), filters = mypageofinterest, table.id = "ga:mytable", max.results=RESULTS only one line of data are returned; the pagepath and nextpagepath are identical with itself. I replicated this result using the Query Explorer. What am I missing or doing wrong? I was expecting to see a large number of "next" pages, including (exit). Thanks in advance.

  Read the article

• Strange mesh import problem with Assimp and OpenGL

  - by Morgan

  Using the assimp library for importing 3D data into an OpenGL application. I get some strange problems regarding indexing of the vertices: If I use the following code for importing vertex indices: for (unsigned int t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace * face = &mesh->mFaces[t]; if (face->mNumIndices == 3) { indices->push_back(face->mIndices[0]); indices->push_back(face->mIndices[1]); indices->push_back(face->mIndices[2]); } } I get the following result: Instead, if I use the following code: for(int k = 0; k < 2 ; k++) { for (unsigned int t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace * face = &mesh->mFaces[t]; if (face->mNumIndices == 3) { indices->push_back(face->mIndices[0]); indices->push_back(face->mIndices[1]); indices->push_back(face->mIndices[2]); } } } I get the correct result: Hence adding the indices twice, renders the correct result? The OpenGL buffer is populated, like so: glBufferData(GL_ELEMENT_ARRAY_BUFFER, indices->size() * sizeof(unsigned int), indices->data(), GL_STATIC_DRAW); And rendered as follows: glDrawElements(GL_TRIANGLES, vertexCount*3, GL_UNSIGNED_INT, indices->data());

  Read the article

• Help with converting an XML into a 2D level (Actionscript 3.0)

  - by inzombiak

  I'm making a little platformer and wanted to use Ogmo to create my level. I've gotten everything to work except the level that my code generates is not the same as what I see in Ogmo. I've checked the array and it fits with the level in Ogmo, but when I loop through it with my code I get the wrong thing. I've included my code for creating the level as well as an image of what I get and what I'm supposed to get. EDIT: I tried to add it, but I couldn't get it to display properly Also, if any of you know of better level editors please let me know. xmlLoader.addEventListener(Event.COMPLETE, LoadXML); xmlLoader.load(new URLRequest("Level1.oel")); function LoadXML(e:Event):void { levelXML = new XML(e.target.data); xmlFilter = levelXML.* for each (var levelTest:XML in levelXML.*) { crack = levelTest; } levelArray = crack.split(''); trace(levelArray); count = 0; for(i = 0; i <= 23; i++) { for(j = 0; j <= 35; j++) { if(levelArray[i*36+j] == 1) { block = new Platform; s.addChild(block); block.x = j*20; block.y = i*20; count++; trace(i); trace(block.x); trace(j); trace(block.y); } } } trace(count);

  Read the article

• Algorithm to reduce a bitmap mask to a list of rectangles?

  - by mos

  Before I go spend an afternoon writing this myself, I thought I'd ask if there was an implementation already available --even just as a reference. The first image is an example of a bitmap mask that I would like to turn into a list of rectangles. A bad algorithm would return every set pixel as a 1x1 rectangle. A good algorithm would look like the second image, where it returns the coordinates of the orange and red rectangles. The fact that the rectangles overlap don't matter, just that there are only two returned. To summarize, the ideal result would be these two rectangles (x, y, w, h): [ { 3, 1, 2, 6 }, { 1, 3, 6, 2 } ]

  Read the article

• DirectWrite Producing Strange Artifacts?

  - by smoth190

  I've written the basis to my UI system around Direct2D. I like it because it's fast and easy to use (even if I had to do some messy work to get it to work with DirectX11). However, I notice when using DirectWrite I'm getting strange problems with my text. As you can see, the e is a little screwwed up, and it overall looks a little bumpy. This only happens with certain fonts in certain sizes, and with certain arrangements of letters. This particular example is Verdana in size 16.0 font. Can I fix this? It's pretty annoying to change all my words and fonts because of this problem.

  Read the article

• How do I draw a single Triangle with XNA and fill it with a Texture?

  - by Deukalion

  I'm trying to wrap my head around: http://msdn.microsoft.com/en-us/library/bb196409.aspx I'm trying to create a method in XNA that renders a single Triangle, then later make a method that takes a list of Triangles and renders them also. But it isn't working. I'm not understanding what all the things does and there's not enough information. My methods: // Triangle is a struct with A, B, C (didn't include) A, B, C = Vector3 public static void Render(GraphicsDevice device, List<Triangle> triangles, Texture2D texture) { foreach (Triangle triangle in triangles) { Render(device, triangle, texture); } } public static void Render(GraphicsDevice device, Triangle triangle, Texture2D texture) { BasicEffect _effect = new BasicEffect(device); _effect.Texture = texture; _effect.VertexColorEnabled = true; VertexPositionColor[] _vertices = new VertexPositionColor[3]; _vertices[0].Position = triangle.A; _vertices[1].Position = triangle.B; _vertices[2].Position = triangle.B; foreach (var pass in _effect.CurrentTechnique.Passes) { pass.Apply(); device.DrawUserIndexedPrimitives<VertexPositionColor> ( PrimitiveType.TriangleList, _vertices, 0, _vertices.Length, new int[] { 0, 1, 2 }, // example has something similiar, no idea what this is 0, 3 // 3 = gives me an error, 1 = works but no results ); } }

  Read the article

• Smoothing rotation

  - by Lewis

  I've spent the last three days trying to work out how to rotate a sprite smoothly depending on the velocity.x value of the sprite. I'm using this: float Proportion = 9.5; float maxDiff = 200; float rotation = fmaxf(fminf(playerVelocity.x * Proportion, maxDiff), -maxDiff); player.rotation = rotation; The behaviour is what I required but if the velocity changes rapidly then it will look like the sprite will jump to face left or jump to face right. I'll go into the behaviour in a little more detail: 0 velocity = sprite faces forwards negative velocity = sprite faces left depending on value. positive velocity = sprite faces right (higher velocity the more it faces right) same as above. I've read about using interpolation rather than an absolute angle to rotate it to but I don't know how to implement that. I have a physics engine available. There is one other way to get around this: to use += on the rotation angle. The thing is that I would then have to change the equation to produce positive and negative values then to make sure the sprite faces 0 once it reaches 0 velocity again. If I add that in now, it keeps the previous angle even after the velocity has dropped / is dropping. Any ideas/code snippets would be greatly appreciated.

  Read the article

• How to snap a 2D Quad to the mouse cursor using OpenGL 3.0?

  - by NoobScratcher

  I've been having issues trying to snap a 2D Quad to the mouse cursor position I'm able : 1.) To get values into posX, posY, posZ 2.) Translate with the values from those 3 variables But the quad positioning I'm not able to do correctly in such a way that the 2D Quad is near the mouse cursor using those values from those 3 variables eg."posX, posY, posZ" I need the mouse cursor in the center of the 2D Quad. I'm hoping someone can help me achieve this. I've tried searching around with no avail. Heres the function that is ment to do the snapping but instead creates weird flicker or shows nothing at all only the 3d models show up : void display() { glClearColor(0.0,0.0,0.0,1.0); glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT); for(std::vector<GLuint>::iterator I = cube.begin(); I != cube.end(); ++I) { glCallList(*I); } if(DrawArea == true) { glReadPixels(winX, winY, 1, 1, GL_DEPTH_COMPONENT, GL_FLOAT, &winZ); cerr << winZ << endl; glGetDoublev(GL_MODELVIEW_MATRIX, modelview); glGetDoublev(GL_PROJECTION_MATRIX, projection); glGetIntegerv(GL_VIEWPORT, viewport); gluUnProject(winX, winY, winZ , modelview, projection, viewport, &posX, &posY, & posZ); glBindTexture(GL_TEXTURE_2D, DrawAreaTexture); glPixelStorei(GL_UNPACK_ALIGNMENT, 1); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexEnvf(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_DECAL); glTexImage2D (GL_TEXTURE_2D, 0, GL_RGB, DrawAreaSurface->w, DrawAreaSurface->h, 0, GL_RGBA, GL_UNSIGNED_BYTE, DrawAreaSurface->pixels); glEnable(GL_TEXTURE_2D); glBindTexture(GL_TEXTURE_2D, DrawAreaTexture); glTranslatef(posX , posY, posZ); glBegin(GL_QUADS); glTexCoord2f (0.0, 0.0); glVertex3f(0.5, 0.5, 0); glTexCoord2f (1.0, 0.0); glVertex3f(0, 0.5, 0); glTexCoord2f (1.0, 1.0); glVertex3f(0, 0, 0); glTexCoord2f (0.0, 1.0); glVertex3f(0.5, 0, 0); glEnd(); } SwapBuffers(hDC); } I'm using : OpenGL 3.0 WIN32 API C++ GLSL if you really want the full source here it is - http://pastebin.com/1Ncm9HNf , Its pretty messy.

  Read the article

• World Location issues with camera and particle

  - by Joe Weeks

  I have a bit of a strange question, I am adapting the existing code base including the tile engine as per the book: XNA 4.0 Game Development by example by Kurt Jaegers, particularly the aspect that I am working on is the part about the 2D platformer in the last couple of chapters. I am creating a platformer which has a scrolling screen (similar to an old school screen chase), I originally did not have any problems with this aspect as it is simply a case of updating the camera position on the X axis with game time, however I have since added a particle system to allow the players to fire weapons. This particle shot is updated via the world position, I have translated everything correctly in terms of the world position when the collisions are checked. The crux of the problem is that the collisions only work once the screen is static, whilst the camera is moving to follow the player, the collisions are offset and are hitting blocks that are no longer there. My collision for particles is as follows (There are two vertical and horizontal): protected override Vector2 horizontalCollisionTest(Vector2 moveAmount) { if (moveAmount.X == 0) return moveAmount; Rectangle afterMoveRect = CollisionRectangle; afterMoveRect.Offset((int)moveAmount.X, 0); Vector2 corner1, corner2; // new particle world alignment code. afterMoveRect = Camera.ScreenToWorld(afterMoveRect); // end. if (moveAmount.X < 0) { corner1 = new Vector2(afterMoveRect.Left, afterMoveRect.Top + 1); corner2 = new Vector2(afterMoveRect.Left, afterMoveRect.Bottom - 1); } else { corner1 = new Vector2(afterMoveRect.Right, afterMoveRect.Top + 1); corner2 = new Vector2(afterMoveRect.Right, afterMoveRect.Bottom - 1); } Vector2 mapCell1 = TileMap.GetCellByPixel(corner1); Vector2 mapCell2 = TileMap.GetCellByPixel(corner2); if (!TileMap.CellIsPassable(mapCell1) || !TileMap.CellIsPassable(mapCell2)) { moveAmount.X = 0; velocity.X = 0; } return moveAmount; } And the camera is pretty much the same as the one in the book... with this added (as an early test). public static void Update(GameTime gameTime) { position.X += 1; }

  Read the article

• Any way to edit Warcraft MDX or MDL Animated models?

  - by Aralox

  I have been searching for a while for a way to get an animated mdl or mdx model into any 3D animating software (such as Blender), but so far have not had any success. I found a few methods of getting textured static mdx or mdl models into Blender/Milkshape/Hexagon, but no one seems to have written an importer that deals with the mdl/mdx model's keyframe animation. On that note, if anyone knows of a way of importing a keyframe-animated 3DS model into Blender, me and alot of people would appreciate it if you could let us know. Thanks for any help! :) PS: For anyone curious about static MDL or MDX - Blender, see here: http://wiki.blender.org/index.php/Extensions:2.6/Py/Scripts/Import-Export/WarCraft_MDL

  Read the article

• Mapping a Vertex Buffer in DirectX11

  - by judeclarke

  I have a VertexBuffer that I am remapping on a per frame base for a bunch of quads that are constantly updated, sharing the same material\index buffer but have different width/heights. However, currently right now there is a really bad flicker on this geometry. Although it is flickering, the flicker looks correct. I know it is the vertex buffer mapping because if I recreate the entire VB then it will render fine. However, as an optimization I figured I would just remap it. Does anyone know what the problem is? The length (width, size) of the vertex buffer is always the same. One might think it is double buffering, however, it would not be double buffering because it only happens when I map/unmap the buffer, so that leads me to believe that I am setting some parameters wrong on the creation or mapping. I am using DirectX11, my initialization and remap code are: Initialization code D3D11_BUFFER_DESC bd; ZeroMemory( &bd, sizeof(bd) ); bd.Usage = D3D11_USAGE_DYNAMIC; bd.ByteWidth = vertCount * vertexTypeWidth; bd.BindFlags = D3D11_BIND_VERTEX_BUFFER; //bd.CPUAccessFlags = 0; bd.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE; D3D11_SUBRESOURCE_DATA InitData; ZeroMemory( &InitData, sizeof(InitData) ); InitData.pSysMem = vertices; mVertexType = vertexType; HRESULT hResult = device->CreateBuffer( &bd, &InitData, &m_pVertexBuffer ); // This will be S_OK if(hResult != S_OK) return false; Remap code D3D11_MAPPED_SUBRESOURCE resource; HRESULT hResult = deviceContext->Map(m_pVertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &resource); // This will be S_OK if(hResult != S_OK) return false; resource.pData = vertices; deviceContext->Unmap(m_pVertexBuffer, 0);

  Read the article

< Previous Page | 10 11 12 13 14 15  | Next Page >