Monthly Archives

Articles indexed in November 2013

Page 141/211 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• unreachable subnet in one direction

  - by Carl Michaud

  I'm unable to route traffic to a subnet in my home. Here's my topology: INET <- Router A <- Router B <- WIFI AP where: Router A - ARRIS TG862G/CT (from comcast) - WAN DHCP, LAN 10.0.0.99 Router B - Linksys WRT400N with DD-WRT - WAN 10.0.0.12 , LAN 10.0.1.1 I was able to use DD-WRT to configure a static route for the 10.0.1.x network back to the 10.0.0.x network. But I'm not sure if i can do the reverse on the ARRIS router and was looking for suggestions on how to fix that. I've set things up this wasy because I am using OpenDNS to mange internet content for my kids and of course I wasn't able to configure DNS to my liking on Router A either. So at present I'm using Router A on 10.0.0.x to provide a private unfiltered WIFI AP (no ssid broadcast) that I use for netflix only and then I use router B to provide a filtered WIFI AP for the rest of my WIFI devices on 10.0.1.x. However I would like to be able to connect to my 10.0.1.x devices from the internet via dynamic dns; but I can't see anything behind router B this way. Thoughts?

  Read the article

• Adobe Reader issue in Ubuntu 13.10

  - by Ridwan Ahmed Khan

  I have downloaded adobe reader 9.5.5 and installed it using gdebi.Now if I click on any pdf it is not starting.I tried "acroread" in terminal and it is showing me this error /opt/Adobe/Reader9/Reader/intellinux/bin/acroread: error while loading shared libraries: libxml2.so.2: cannot open shared object file: No such file or directory Then I have installed libxml2.But still it is showing the same above error. My system OS is ubuntu 13.10. Is there any solution to my problem for using Adobe reader or any other alternative pdf reader other than foxit and default(evince) or okular by using which I can highlight any text in my pdf?

  Read the article

• some files just wont install- linux-image-3.5.0-42-generic

  - by jatin

  It gives the following details of the package operation failing after using the sofware updater on 12.10: installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... (Reading database ... (Reading database ... 217566 files and directories currently installed.) Preparing to replace linux-image-3.5.0-36-generic 3.5.0-36.57~precise1 (using .../linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-36-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-36-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic Preparing to replace linux-image-3.5.0-42-generic 3.5.0-42.65~precise1 (using .../linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-42-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-42-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic Preparing to replace memtest86+ 4.20-1.1ubuntu1 (using .../memtest86+_4.20-1.1ubuntu2.1_amd64.deb) ... Unpacking replacement memtest86+ ... dpkg: error processing /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb (--unpack): unable to make backup link of `./boot/memtest86+.bin' before installing new version: Operation not permitted No apport report written because MaxReports is reached already locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb Error in function: Output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda6 38G 6.5G 30G 19% / udev 3.5G 4.0K 3.5G 1% /dev tmpfs 1.5G 924K 1.5G 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 3.6G 296K 3.6G 1% /run/shm none 100M 64K 100M 1% /run/user /dev/sda1 197M 87M 111M 44% /boot /dev/sda5 243G 971M 230G 1% /home

  Read the article

• Ubuntu 12.04 resolution stuck on 640x480

  - by user212483

  I am new to Ubuntu and I was trying to get my HDMI enabled TV to work with my Ubuntu 12.04 computer and I installed a Nvidia driver using the "additional drivers" program. After that didn't work, I started playing around with the dual booted windows 7 on my computer. Now, I've never used that windows since I installed it so I was stripped down to bare minimum so I tried to adjust the resolution(as it was on lowest resolution) and tried to connect the HDMI, which didn't work. After that I came back to my Ubuntu installation only to find out that it is now stuck on 640x480 resolution. I tried to remove the driver that I installed again using the "additional drivers" program but that didn't help at all. The error that showed up was - Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Any help would be appreciated as this is very annoying. Thanks

  Read the article

• How can I reinstall pulseaudio? (12.04 64bit)

  - by Luca Cerone

  I accidentally removed pulseaudio from my Ubuntu 12.04 64bit. I have tried reinstalling it using sudo apt-get install pulseaudio but my sound card doesn't appear in the list of the devices (in System Settings -- Sound). For the moment I managed to get sounds by using ALSA, but I would like to reinstall pulseaudio and have it working as before my accidental removal. How can I reinstall it and have the devices configured correctly?

  Read the article

• Skype, green screen, no microphone

  - by EddyThe B

  I have issues with skype using my brand new System 76 Galago Ultrapro, running Ubuntu 13.04. I installed Skype through ubuntu software centre (after allowing Canonical partner stuff), but it won't work, the video is a green screen, and it won't connect to the microphone. The webcam works when using Cheese, and the microphone appears to work in general (it shows sound levels when I go to the Input tab under the Sound settings). I tried to fix the green screen issue using this command: $ echo -e '#!bin/bash n LD_PRELOAD=/usr/lib/i386-linux-gnu/libv4l/v4l1compat.so /usr/bin/skype' | sudo tee /usr/local/bin/skype sudo chmod a+x /usr/local/bin/skype as suggested here: http://debianhelp.wordpress.com/2012/09/28/to-do-list-after-installing-ubuntu-13-04-aka-raring-ringtail-operating-system/ but no luck. Any ideas? I have also asked this question to the System 76 tech support folk.

  Read the article

• Part of the launcher has been cut off, Ubuntu 12.04

  - by Tim

  After a hard drive failure on my iMac, I replaced it and installed Ubuntu. So far, I am finding it very easy to use, however there is one problem which is making it much harder. The bottom of the launcher is missing - it is 'covered' by the desktop background. This means that I cant see the trash, or bottom few icons. Even if I scroll, it doesn't show it. Any help is very much appreciated. If you send a message to [email protected], with the subject "launcher photo", I will send you an email with the photo of the missing part attached. Currently, my only fix is to enable and then disable the extra screen it thinks is there - called unknown device

  Read the article

• Wired Lan problem In ubuntu 12.04

  - by user137935

  I am new to Ubuntu I have installed Ubuntu 12.04 as partition (with dual boot) using Wubi. In that my WiFi is working fine but LAN is being detected but its not working. I have tried some of the solutions like: I opened: gksu gedit /etc/network/interfaces I added these lines to the file: auto eth0 iface eth0 inet dhcp Then I restarted the network: sudo service networking restart But still the problem persists. Why does Ubuntu 12.04 has issues with LAN when installed? any help would be appreciated

  Read the article

• missing sound-volume-applet

  - by psipi

  I am using ubuntu 12.10. I had some problems with my skype and audio. So I did the following and it's working fine now: sudo apt-get purge pulseaudio sudo apt-get autoremove sudo reboot After this I reinstalled pulseaudio via sudo apt-get install pulseaudio But now my icon in the gnome-panel is missing. After searching on google I found that that the sound-volume-applet ist missing. So is this right? And do you get the icon in the panel?

  Read the article

• Microsoft , Hotmail , Live , MSN, Outlook , unable to send emails and no support received from microsoft in 3 months we are trying asking for that

  - by HugeNut

  Ok this is somenthing unbelievable, we have a website, users sign up and receives links to confirm they signed up BUT: 1 - microsoft blocked our IP (no one with microsoft email account can receive our emails) 2 - we tryed contacting microsoft submitting the detailed form about our problem 3 - we posted 3 times in their community about our problem 4 - we tweeted they about our problem 5 - we tryed finding out some telephone support number (the few there are arent' helping at all) Do you think we solved? the answer is NO :/ We still unable to send emails from our IP to microsoft email accounts, since 3 months back. Our emails are perfect we checked all the email headers following microsoft guidelines but it seems not enought, checking our IP reputation it seems everythings ok, indeed we can send email easly to any other provider , gmail, yahoo, etc Do you know any other way to try to get help ? FULL ERROR RETURNED BY MICROSOFT: host mx1.hotmail.com[65.55.37.120] said: 550 SC-001 (COL0-MC4-F28) Unfortunately, messages from 94.23.***** weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command) We are running NGIX + php mailer from a Virtual Private Server (No Hosting or shared hosting)

  Read the article

• Is it true that quickly closing a webpage opened from a search engine result can hurt the site's ranking?

  - by Austin ''Danger'' Powers

  My web designer recently told me that I need to be careful not to Google for my business' website, click on its search result link, then quickly close the page (or click back) too many times. He says "Google knows" that I didn't stay on the page, and could penalize my site for having a high click-through rate if it happens too much (it was something along those lines- I forget the exact wording). Apparently, it could look like the behavior of a visitor who was not interested in what they found (hence the alleged detrimental effect on the site's search ranking). This sounds hard to believe to me because I would not have thought any information is transmitted which tells Google (or anyone, for that matter) whether or not a website is still open in a browser (in my case Firefox v25.0). Could there possibly be any truth to this? If not, why might he have come to this conclusion? Is there some click-tracking or similar technology employed by search engines which does something similar? Looking forward to hearing everyone's thoughts.

  Read the article

• Standalone URL 301 Redirect Manager [on hold]

  - by Lex

  I'm looking for a script with a simple interface that helps me manage a large list of 301 redirects of the form: http://example.com/short ---> http://example.com/long-and-descriptive For example the following Wordpress plugin does this job, but it seems excessive to install Wordpress just for this one simple functionality. It looks like my question is similar to this closed question, but hopefully rephrased in such a way that makes it more relevant and "constructive".

  Read the article

• Using a CDN for CMS software (multiple sites)

  - by SmokeyPHP

  I'm currently researching ideas for the media management side of a CMS I'm writing. I was looking at having images served from a CDN which is fine on a single site, but I want all sites that run the CMS to make use of a CDN (which will most likely be a custom developed one, rather than a third party service like S3). My main question is: Is a multi-site CDN a good idea? I can't think of a downside, but have probably missed something - obviously they won't share the same folder, as I invisage the requests to be css.cdnsite.com/example.com/style.css or something along those lines. Having multiple sites in the same place will obviously make it easier for us to manage, as well as being cheaper, but then I wonder if it'll be worth it... Long story short: How should the CMS handle user uploaded media (separate installations) Just keep a local copy of all assets and serve them from the same site, like in days of yore? Keep a local copy, force site to use www. and have CDN subdomains per site? Or use a single separate CDN for all sites? Apologies for the length of this question, not sure if this should be multiple questions or not, as all parts are kind of related and could affect each other.

  Read the article

• Google Analytics - Profile filter with more than one dimension?

  - by Drewdavid

  I have identified some bot traffic in GA, but to filter it accurately I need to filter it by two dimensions, namely Browser and ISP To be clear, I don't want to apply both a filter to block the entire ISP and the entire Browser segments, but only the combination of the two To illustrate: Could someone explain how to do this? It's not apparent using the interface and I'm not able to find any documentation about it

  Read the article

• Google Webmaster Tools robots test not working

  - by tracy_snap

  Within Webmaster Tools I have supplied my test content: User-agent: * Disallow:/admin/ Disallow: /tag/ When I specify the URL to test against, for example: http://www.site.com/tag/ It gives me this result: "Allowed: Detected as a directory; specific files may have different restrictions" As far as I know I have set this up correctly, shouldn't Google be saying that the /tag/ directory is "disallowed"?

  Read the article

• Amazon EC2 vs Dedicated server at Hetzner, what's the use for EC2?

  - by C-Blu

  After searching the web I still can't find the reason to use EC2. What's the point to scale EC2? If you expect a huge burst in traffic, they say. OK, but what if you already have a couple of sites with good traffic, and for example medium reserved EC2 instance is not enough. You are paying $36.60(medium reserved for 1year) in EU(Ireland) + traffic + optional expenses for databases and S3 if you use them. Of course as some point when you are under $56.6-$66.1 you can optimize your hosting costs with Amazon EC2. But when you get at some point if purchase EX4 server from Hetzner, it will surpass your perfomance needs for a long time, before you get a massive traffic. (I am wrong?) CPU: i7-2600 Quadcore (3.4-3.8 Ghz) RAM: 16 GB HDD: 2x3 TB SATA (6 Gbit/s) - I think that disc performance of a dedicated is better then of Amazon EBS Traffic: 10 TiB in month included. This is what you get from Hetzner for $56(- 19% VAT) or $66 for EU residents. Please, tell me what's the reason to use Amazon? Which load won't a server from Hetzner take, but Amazon Auto Scaling will? The maintenance of dedicated vs EC2 is still the same? Or hardware failure at Amazon, won't ruin your EBS storage? I'm still not at the level when I need expensive hosting, but want to know beforehand, just to be sure if Amazon infrastructure is better then pure performance of Hetzner's hardware.

  Read the article

• Subfolder non-www redirect

  - by Zealotry

  Is there a way to redirect a sub folder to no-www? What I use is: RewriteEngine On RewriteBase / RewriteCond %{HTTP_HOST} ^www\.(.*)$ [NC] RewriteRule ^(.*)$ http://%1/$1 [R=301,L] but this only redirects the www.example.com to example.com. I would like to redirect: www.example.com/home/ to example.com/home/ www.example.com/home/whatever URL to example.com/home/whatever URL. I have tried this: RewriteEngine on Options +FollowSymlinks -MultiViews RewriteCond %{HTTP_HOST} ^(www\.)?example\.com$ [NC] RewriteRule ^$ http://example.com [R=301,L] RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC] RewriteCond %{REQUEST_URI} !^/home/ [NC] RewriteRule ^(.+)$ http://example.com/$1 [R=301,L] This does not work, either. I can't really figure it out. Any help appreciated! ANSWER I figured it out and I will post it for others to see, if having the same issue. In the sub folder directory's .htaccess used the following: RewriteCond %{HTTP_HOST} ^(www\.example\.com)?$ RewriteRule ^(.*)$ http://example.com/subfoldername/$1 [R=301,L]

  Read the article

• Is it possible to create an "impossible" rooms in games?

  - by qwerty3000

  Forgive me my lack of knowlegde, but for quite a long time I asked myself whether it was possible to create a continous game space that some player could walk inside and so on, that would be absolutely impossible in reality, e.g. you have a very small house that allows you to go around it to see all sides and the full dimensions, and then, when you enter, it is like a giant hall, without any loading screen or (internal) "model change" and so on. I'm no game designer and I never needed to learn 3D-modelling, so I don't know what is possible and what isn't. And is this the same as Is the "impossible object" possible in computer graphics? this? Or is it just the same category, but not exactly the same question? Thanks.

  Read the article

• Setting up cube map texture parameters in OpenGL

  - by KaiserJohaan

  I see alot of tutorials and sources use the following code snippet when defining each face of a cube map: for (i = 0; i < 6; i++) glTexImage2D(GL_TEXTURE_CUBE_MAP_POSITIVE_X + i, 0, InternalFormat, size, size, 0, Format, Type, NULL); Is it safe to assume GL_TEXTURE_CUBE_MAP_POSITIVE_X + i will properly iterate the following cube map targets, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y etc?

  Read the article

• With 2 superposed cameras at different depths and switching their culling masks between layers to implement object-selective antialising:

  - by user36845

  We superposed two cameras, one of which uses AA as post-processing effect (AA filtering is cancelled). The camera with the AA effect has depth 0 and the camera with no effect has depth 1 as can be seen in the 5th and 6th Picture. The objects seen on the left are in layer 1 and the ones on the right are in layer 2. We then wrote a script that switches the culling masks of the cameras between the two layers at the push of buttons 1 and 2 respectively, and accomplishes object-selective antialiasing as seen in the first the three pictures. (The way two cameras separately switch culling masks between layers is illustrated in pictures 7,8 & 9.) HOWEVER, after making the environment 3D (see pictures 1-4), by parenting the 2 cameras under First-Person Controller, we started moving around in the environment and stumbled upon a big issue: When we look at the objects from such an angle as in the 4th Picture and we want to apply antialiasing to the first object (object on the left) which stands closer to our cameras now, the culling mask of 1st camera which is at depth 0, has to be switched to that object’s layer while the second object has to be in the culling mask of the 2nd camera at depth 1. And since the two image outputs of two superposed cameras are laid on top of one another; we obtain the erroneous/unrealistic result of the object farther in the back appearing closer to the camera than the front object (see 4th Picture). We already tried switching depths of cameras so that the 1st camera –with AA- now has depth 1 and the second has depth 0; BUT the camera with the AA effect Works in such a way that it applies the AA effect to its full view. So; the camera with the AA effect always has to remain at the lowest depth and the layer of the object to be antialiased has to be then assigned to the culling mask of the AA camera; otherwise all objects in the AA camera’s view (the two cubes in our case) become antialised, which we don’t want. So; how can we resolve this? The pictures are below and in the comments since each post can have 2 pics: Pic 1. No button is pushed: Both objects seem aliased. Pic 2. Button 1 is pushed: Left (1st) object is antialiased. 2nd object remains aliased. Pic 3. Button 2 is pushed: Right (2nd) object is antialiased. 1st object remains aliased. Pic 4. The problematic result in 3D, when using two superposed cameras with different depths Pic 5. Camera 1’s properties can be seen: using AA post-processing and its depth is 0 Pic 6. Camera 2’s properties can be seen: NOT using AA post-processing and its depth is 1 Pic 7. When no button is pushed, both objects are in the culling mask of Camera 2 and are aliased Pic 8. When pushed 1, camera 1 (bottom) shows the 1st object and camera 2 (top) shows the 2nd Pic 9. When pushed 2, camera 1 (bottom) shows the 2nd object and camera 2 (top) shows the 1st

  Read the article

• Where can I find game postmortems with a programmer perspective [on hold]

  - by Ken

  There are a number of interesting game post-mortems in places like GDC vault or gamastura.com. The post-mortems are generally give with a CEO/manager perspective or a designer perspective, or, more often a combination of both e.g DOOM postmortem But I have not been able to find many post-mortems which are primarily from the programmers perspective. I'm looking for discussions and rational for technical choices and tradeoffs and how technical problems were overcome. The motivation here is to learn what kind of problems real game programmers encounter and how they go about solving them. A perfect example of what I'm looking for is Renaud Bédard's excellent GDC talk on the development of Fez, "Cubes all the way down". Where can I find more like that?

  Read the article

• OcclusionQuery: how to ignore some objects?

  - by ApocKalipsS

  I'm trying to make a LensFlare effect when the player watch the sun in my XNA 4.0 Game. To do this, I use OcclusionQuery, here's my code: http://pastebin.com/meAkdwmD I also have some models, a terrain and a skybox. Here's my main Draw code: terrain.Draw(); model1.Draw(); model2.Draw(); skybox.Draw(); lensFlare.UpdateOcclusion(); lensFlare.Draw(); The problem is that the occlusion considers the sun to be behind the skybox, and the lensFlare wasn't showing up. So I moved lensFlare.UpdateOcclusion() before the drawing of the Skybox, and now the lensFlare appears, but my skybox is blinking (it's like it disappear and reappear at each frames...) How do I ignore the skybox in the occlusion?

  Read the article

• Creating user UI using Flixel

  - by Jamie Read

  I am new to game development but familiar with programming languages. I have started using Flixel and have a working Breakout game with score and lives. What I am trying to do is add a Start Screen before actually loading the game. I have a create function that adds all the game elements to the stage: override public function create():void // all game elements { How can I add this pre-load Start Screen? I'm not sure if I have to add in the code to this create function or somewhere else and what code to actually add. Eventually I would also like to add saving, loading, options and upgrades too. So any advice with that would be great. Here is my main game.as: package { import org.flixel.*; public class Game extends FlxGame { private const resolution:FlxPoint = new FlxPoint(640, 480); private const zoom:uint = 2; private const fps:uint = 60; public function Game() { super(resolution.x / zoom, resolution.y / zoom, PlayState, zoom); FlxG.flashFramerate = fps; } } } Thanks.

  Read the article

• Flixel Game Over Screen

  - by Jamie Read

  I am new to game development but familiar with programming languages. I have started using Flixel and have a working Breakout game with score and lives. I am just stuck on how I can create a new screen/game over screen if a player runs out of lives. I would like the process to be like following: Check IF lives are equal to 0 Pause the game and display a new screen (probably transparent) that says 'Game Over' When a user clicks or hits ENTER restart the level Here is the function I currently have to update the lives: private function loseLive(_ball:FlxObject, _bottomWall:FlxObject):void { // check for game over if (lives_count == 0) { } else { FlxG:lives_count -= 1; lives.text = 'Lives: ' + lives_count.toString() } } Here is my main game.as: package { import org.flixel.*; public class Game extends FlxGame { private const resolution:FlxPoint = new FlxPoint(640, 480); private const zoom:uint = 2; private const fps:uint = 60; public function Game() { super(resolution.x / zoom, resolution.y / zoom, PlayState, zoom); FlxG.flashFramerate = fps; } } }

  Read the article

• Rotations and Origins

  - by Theodore Enderby

  I was hoping someone could explain to me, or help me understand, the math behind rotations and origins. I'm working on a little top down space sim and I can rotate my ship just how I want it. Now, when I get my blasters going it'd be nice if they shared the same rotation. Here's a picture. and here's some code! blast.X = ship.X+5; blast.Y = ship.Y; blast.RotationAngle = ship.RotationAngle; blast.Origin = new Vector2(ship.Origin.X,ship.Origin.Y); I add five so the sprite adds up when facing right. I tried adding five to the blast origin but no go. Any help is much appreciated

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >