Monthly Archives

Articles indexed in November 2012

Page 203/450 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

• cannot connect with huawei e173 after upgrade to 12.10 using network manager

  - by user104195

  Since upgrade from 12.04 to 12.10 I can't connect to internet using mobile broadband modem Huawei e173. It worked earlier without problems and now it seems to be properly recognized (at least its connections appear in network manager applet), and after selecting connection manually it starts connection procedure. After about 20 seconds it returns to state disconnected. After browsing internet I've found that running network manager with: NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon After inserting modem I get: NetworkManager[507]: <warn> (ttyUSB2): failed to look up interface index NetworkManager[507]: <info> (ttyUSB2): new GSM/UMTS device (driver: 'option1' ifindex: 0) NetworkManager[507]: <info> (ttyUSB2): exported as /org/freedesktop/NetworkManager/Devices/2 NetworkManager[507]: <info> (ttyUSB2): now managed NetworkManager[507]: <info> (ttyUSB2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'managed') [2] NetworkManager[507]: <info> (ttyUSB2): device state change: unavailable -> disconnected (reason 'none') [20 30 0] where 'failed to look up interface index' seems to be suspicious. After starting connecting: NetworkManager[507]: <info> Activation (ttyUSB2) starting connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> need-auth (reason 'none') [40 60 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: need-auth -> prepare (reason 'none') [60 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> WWAN now enabled by management service NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) successful. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) started... NetworkManager[507]: <info> (ttyUSB2): device state change: config -> ip-config (reason 'none') [50 70 0] NetworkManager[507]: <info> starting PPP connection NetworkManager[507]: <info> pppd started with pid 663 NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) started... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded. ** Message: nm-ppp-plugin: (plugin_init): initializing ** Message: nm-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection' Removed stale lock on ttyUSB2 (pid 32146) using channel 23 NetworkManager[507]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) NetworkManager[507]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. NetworkManager[507]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring... Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB2 ** Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish' sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] NetworkManager[507]: <warn> pppd timed out or didn't initialize our dbus module NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) started... NetworkManager[507]: <info> (ttyUSB2): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] NetworkManager[507]: <warn> Activation (ttyUSB2) failed for connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) complete. NetworkManager[507]: <info> (ttyUSB2): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'none') [0] Terminating on signal 15 ** Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate' sent [LCP TermReq id=0x2 "User request"] NetworkManager[507]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) where repeated: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] last for about 20 seconds. I've tried to downgrade network manager but failed due to many dependencies. Can anyone point me to solution or tell what should I do to further investigate the problem?

  Read the article

• Unable to connect via Mobile Broadband - But its detected - 12.10

  - by Rexford

  Previously (on ubuntu 12.04), i will just connect my 3G mobile broadband modem, and will start browsing after enabling it and going through the setup process. However, on the 12.10, I'm able to setup my connection, but it doesn't connect to the internet. All settings are okay. I've tried two different network providers in Ghana, still, i'm not able to connect. At times, i'm notified that, its connected to the "home network" of the service provider, but disconnects in less than 10 seconds. Is it supposed to be a bug? I've been reading about the wvdial, but I'm wondering something that used to be possible by "default" in Ubuntu should now be "configured" via a software. Help!

  Read the article

• Minecraft Fullscreen not working

  - by Straemer

  I upgraded to Quantal recently, and Minecraft seems to not want to run in fullscreen. When I go to fullscreen it, the screen will go black for a second, as if it was about to go fullscreen normally, but then it just restores back into its window. So far I have tried: using different JREs (I've tried openjdk 6 and 7, as well as oracle7). Oracle's jre wouldn't even run Minecraft (I just got a black screen after logging in) switching graphics drivers (tried nvidia-current, nvidia-current-updates, and xserver-xorg-video-nouveau) updating minecraft bin files updating lwjgl libraries separately from the lwjgl site None of this seemed to work at all. I am running Minecraft with the command java -Xmx1024M -Xms512M -cp minecraft.jar net.minecraft.LauncherFrame Graphics card is GeForce 9500 GS/PCIe/SSE2. Everything was working fine a few days ago when I was on 12.04.

  Read the article

• Extremely slow transfer speed ubuntu -> Windows

  - by Hailwood

  I have two laptops, One is running Ubuntu 12.04 (EXT4) the other is running Windows 7 (NTFS). I am copying over 40gb of data (one file) from the Ubuntu laptop to the Windows Laptop. (Browse the shared folder on Ubuntu using Windows copy/paste) But I am getting transfer speeds topping out at ~700kb/s Surely this is not right. I am transferring via wifi on both laptops. My download speeds can reach 7-8mb/s on both laptops, so I know it is not the wifi cards or the router topping out. wlan0 Link encap:Ethernet HWaddr 84:4b:f5:db:b4:85 inet addr:192.168.1.66 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::864b:f5ff:fedb:b485/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11941185 errors:0 dropped:0 overruns:0 frame:0 TX packets:11306693 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10087111370 (10.0 GB) TX bytes:7843524888 (7.8 GB)

  Read the article

• How to fix "apt-get upgrade" errors?

  - by mohamad farid bin abdullah

  I get these errors when I try to upgrade the packages installed on my Ubuntu system: m@m-desktop ~ $ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. After this operation, 0B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up drbd8-source (2:8.3.7-1ubuntu2.3) ... Removing old drbd8-8.3.7 DKMS files... ------------------------------ Deleting module version: 8.3.7 completely from the DKMS tree. ------------------------------ Done. Loading new drbd8-8.3.7 DKMS files... First Installation: checking all kernels... Building only for 2.6.35-22-generic Building for architecture i386 Building initial module for 2.6.35-22-generic Error! Bad return status for module build on kernel: 2.6.35-22-generic (i386) Consult the make.log in the build directory /var/lib/dkms/drbd8/8.3.7/build/ for more information. dpkg: error processing drbd8-source (--configure): subprocess installed post-installation script returned error exit status 10 dpkg: dependency problems prevent configuration of drbd8-utils: drbd8-utils depends on drbd8-source; however: Package drbd8-source is not configured yet. dpkg: error processing drbd8-utils (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: drbd8-source drbd8-utils E: Sub-process /usr/bin/dpkg returned an error code (1) m@m-desktop ~ $

  Read the article

• What's the ideal setup for an news minisite for an app [closed]

  - by Leonardo Amigoni

  I am mobile app developer, I would like my application to check for news about new updates of the app when the user opens it. I am unfamiliar on how I would check from a server if the news are actually new or have already been read. If they have not been read, I could of course display them in the app. Can anyone point me in the right direction on how to achieve this? Something similar to an RSS feed but on mobile. Thanks

  Read the article

• Where does the URL parameter "?chocaid=397" come from?

  - by unor

  In Google Webmaster Tools, I noticed that my front page was indexed two times: example.com/ example.com/?chocaid=397 I know that I could fix this with the use of link type canonical, but I wonder: Where does this parameter come from? There are various sites that have pages indexed with this very parameter/value: https://duckduckgo.com/?q=chocaid%3D397. I looked for similarities between these sites. but couldn't find a conclusive one: It's often the front page, but not in every case. Some are NSFW, but not all. When one domains' URL has this parameter, often other subdomains of the same domain have it, too. Examples Wikipedia entry Microsoft Codeplex

  Read the article

• Server Firewall preventing sending of email [migrated]

  - by Jo Fitzgerald

  The firewall on my VPS appears to be preventing my site from sending email. It was working fine until the end of last month. My hosting provider (Webfusion) has been next to useless. I am able to send email if I open INPUT ports 32768-65535, but not if these ports are closed. Why would this be? I have the following rules in my firewall: # sudo iptables -L Chain INPUT (policy DROP) target prot opt source destination VZ_INPUT all -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination VZ_FORWARD all -- anywhere anywhere Chain OUTPUT (policy DROP) target prot opt source destination VZ_OUTPUT all -- anywhere anywhere Chain VZ_FORWARD (1 references) target prot opt source destination Chain VZ_INPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:www ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssmtp ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpts:32768:65535 ACCEPT udp -- anywhere anywhere udp dpts:32768:65535 ACCEPT tcp -- localhost.localdomain localhost.localdomain ACCEPT udp -- localhost.localdomain localhost.localdomain Chain VZ_OUTPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere ACCEPT udp -- anywhere anywhere The VPS is running Plesk 10.4.4 (please ask if you require further technical information to help me)

  Read the article

• different data with same title and keywords

  - by Junaid Saeed

  here is my scenario i have a website where i redirect my users basing upon the device they were using, lets say a user is visiting from an iPad, i take him directly to the page of iPad wallpapers, the user selects iPad version & i take the user to the gallery of wallpapers where the user can select & download any wallpaper. Every wallpaper is the required resolution, i have my reasons for doing this, now the thing is there are diff. resolution. versions of an image appearing one 5 diff. sections of my website, each having their own view page Now there is only one record in db.table for the image, and basing on the my consistent naming convention of the images, i pick the required image. this means when 5 different pages are generated in 5 categorized sections of the website, due to a shared DB record, the keywords, the titles and every single detail of the 5 pages is same besides the resolution of the image, and the section specific details that the page has and yeah the pages also have different paths like wallpapers.com\ipad-1\cars\Ferrari-dino.html wallpapers.com\ipad-2\cars\Ferrari-dino.html wallpapers.com\ipad-3\cars\Ferrari-dino.html wallpapers.com\ipad-4\cars\Ferrari-dino.html wallpapers.com\ipad-5\cars\Ferrari-dino.html now this is my scenario, How do Search Engines see it and how do they rank it? Is it a Good or Normal or Bad SEO practice? If bad how dangerous it is for my sites SEO? i need your comments on my scenario.

  Read the article

• GLES2.0 3D Android game performance and multi threading the update?

  - by Ofer

  I have profiled my mixed Java\C++ Android game and I got the following result: https://dl.dropbox.com/u/8025882/PompiDev/AndroidProfile.png As you can see, the pink think is a C++ functions that updates the game. It does things like updating the logic but it mostly it generates a "request list" for rendering. The thing is, I generate DrawLists on C++ and then send them to Java to process and draw using GLES2.0. Since then I was able to improve update from 9ms down to about 7ms, but I would like to ask if I would benefit from multi threading the update? As I understand from that diagram is that the function that takes the most time is the one you see it's color on the timeline. So the pink area is taken mostly by update. The other area has MainOpenGL.Handle as it's main contributor(whch is my java function), but since it's not drawn to the top of the diagram I can conclude other things are happening at the same time that use the CPU? Or even GPU stuff that isn't shown in this diagram. I am not sure how the GPU works on this. Does it calculate stuff in parallel to the CPU? Or is it part of the CPU usage as in SoC? I am not sure. Anyway, in case GPU things DO happen in parallel to CPU, then I would guess that if I do this C++ Update in parallel to the thread that makes the OpenGL calls, I might make use of "dead CPU time" due to GPU stalling or maybe have the GPU calls getting processed earlier because it won't have to wait for Update to finish? How do you suggest to improve performance based on that? Thanks.

  Read the article

• What is the best way to generate income from mobile games?

  - by Thomas

  As the title states, what is the best way to get income from mobile games? (taking into consideration that creating the games only costs a lot of time and the games are relatively simple) As I see it, there are multiple ways of getting money from mobile games, Selling them for a fixed price (seems like a high threshold for potential buyers) In-game purchases (I can imagine this only works for several types of games, I don't see this working well for monopoly unless you like really fancy hotels ;) Ingame advertisements / sponsorships Which way will most likely bring the most profit?

  Read the article

• Simple Multiplayer CCG System

  - by TobiHeidi

  I am working on a cross plattform Multiplayer CCG (web, android, ios). Here are my goals in design: I want to game to be easly accessible and understandable for non CCG players within the first minute of play. a single game should be played by 2 - 4 players a once, without problems if one players drops out during play. players should make their next turn simultaneous (without waiting for other to make their turns) My current approach: each Card has a point value for four Elements. In each Turn an Element is (randomly) selected and every Player chooses 1 card out of 3. The Player choosen the card with the highest value for that element wins the Round. After 10 Rounds the players a ranked by how many rounds they won. Why does this approach seems not optimal? It seems really to easy to determin the next best turn. Your own turn is to little affected by the play style of the others. I would love the have a system where some cards are better against other cards. A bit of rock paper scissors where you have to think about what next turn the other players will make or so. But really think freely. I would love to hear ideas may it be additions or new systems to make a CCG with roughly the stated design goals. Thanks

  Read the article

• Is it possible to construct a cube with fewer than 24 vertices

  - by Telanor

  I have a cube-based world like Minecraft and I'm wondering if there's a way to construct a cube with fewer than 24 vertices so I can reduce memory usage. It doesn't seem possible to me for 2 reasons: the normals wouldn't come out right and per-face textures wouldn't work. Is this the case or am I wrong? Maybe there's some fancy new DX11 tech that can help? Edit: Just to clarify, I have 2 requirements: I need surface normals for each cube face in order to do proper lighting and I need a way to address a different indexes in a texture array for each cube face

  Read the article

• Morph a sphere to a cube and a cube to a sphere with GLSL

  - by nkint

  I'm getting started with GLSL with quartz composer. I have a patch with a particle system in which each particle is mapped into a sphere with a blend value. With blend=0 particles are in random positions, blend=1 particles are in the sphere. The code is here: vec3 sphere(vec2 domain) { vec3 range; range.x = radius * cos(domain.y) * sin(domain.x); range.y = radius * sin(domain.y) * sin(domain.x); range.z = radius * cos(domain.x); return range; } // in main: vec2 p0 = gl_Vertex.xy * twopi; vec3 normal = sphere(p0);; vec3 r0 = radius * normal; vec3 vertex = r0; normal = normal * blend + gl_Normal * (1.0 - blend); vertex = vertex * blend + gl_Vertex.xyz * (1.0 - blend); I'd like the particle to be on a cube if blend=0 I've tried to find but I can't figure out some parametric equation for the cube. Maybe it is not the right way?

  Read the article

• UIView Animation Inconsistent Result

  - by Josh Kahane

  I am trying to make use of UIView animation to slide my views across the screen. I have a UIScrollView in my view controller, in which I have my UIViews. I alos have this method: -(void)translateView:(UIView *)view toRect:(CGRect)rect withDuration:(CGFloat)duration { [UIView animateWithDuration:duration animations:^ { view.frame = rect; } completion:^(BOOL finished) { //Finished }]; } I call this to move my UIView in an animated fashion to a CGRect of my choice over a certain time. I have a loop which creates and slides out 7 views. This works great, I call it like below, the loop of course calling this 7 times on different views: [self translateView:cell toRect:translationRect withDuration:0.7]; However, I can't then call this again immediately afterwards, just nothing happens. Although, lets say I call this again after a 2 second NSTimer, the animation does run, but then when i scroll my UIScrollView, the view I just animated jumps back to its previous CGRect. Hope you can help, its all feeling very un-explanetory, Ill post more code if it isn't making any sense, thanks.

  Read the article

• Text not showing up in custom pushpins? Is there a way?

  - by Shakeeb Ahmad

  This is the code I am using to plot my custom pushpins on Bing Maps. I can't get the text to print on the pushpin icon which is just the default pushpin but in a different color. Is it even possible like this? Is there another way? I can't seem to find any, Help! var pushpinOptions = {icon: '/assets/greenpin.png', visible: true}; var pushpin = new Microsoft.Maps.Pushpin(new Microsoft.Maps.Location(lat, lng), pushpinOptions, {text: alphas[i] });

  Read the article

• Java For-Each Loop to Deal to multiple Hands

  - by qwertyRocker

  I'm trying to find a good way to 'deal' cards to 4 difference hands. System.out.println("Deal to 4 Hands: "); Hand hand1 = new Hand(); Hand hand2 = new Hand(); Hand hand3 = new Hand(); Hand hand4 = new Hand(); hand1.addSingleCard(Deck.deal()); hand2.addSingleCard(Deck.deal()); hand3.addSingleCard(Deck.deal()); hand4.addSingleCard(Deck.deal()); hand1.addSingleCard(Deck.deal()); hand2.addSingleCard(Deck.deal()); hand3.addSingleCard(Deck.deal()); hand4.addSingleCard(Deck.deal()); System.out.println("Cards left in deck: " + Deck.size()); System.out.println("Player 1's Hand: \n" + hand1.getHand()); System.out.println("Player 2's Hand: \n" + hand2.getHand()); System.out.println("Player 3's Hand: \n" + hand3.getHand()); System.out.println("Player 4's Hand: \n" + hand4.getHand()); Is there an easier way to deal to hands? For example using a For-Each loop? I tried this: but it doesn't work. I haven't really used this type of loop very must... for(Hand card : hand1){ System.out.println("Player 1's Hand: \n" + hand1); } By the way, this deals 2 cards to 4 difference hands, then prints each hand.

  Read the article

• Write to static field - is FindBugs wrong in this case?

  - by htorque

  I have a Java class like this: public class Foo { public static int counter = 0; public void bar(int counter) { Foo.counter = counter; } } FindBugs warns me about writing to the static field counter via the instance method bar. However, if I change the code to: public class Foo { public static int counter = 0; public static void setCounter(int counter) { Foo.counter = counter; } public void bar(int counter) { setCounter(counter); } } Then FindBugs won't complain. Isn't that wrong? I'm still writing to a static field from an instance method, just via a static method - no?

  Read the article

• Values of Variables Matrix NumPy

  - by Max Mines

  I'm working on a program that determines if lines intersect. I'm using matrices to do this. I understand all the math concepts, but I'm new to Python and NumPy. I want to add my slope variables and yint variables to a new matrix. They are all floats. I can't seem to figure out the correct format for entering them. Here's an example: import numpy as np x = 2 y = 5 w = 9 z = 12 I understand that if I were to just be entering the raw numbers, it would look something like this: matr = np.matrix('2 5; 9 12') My goal, though, is to enter the variable names instead of the ints.

  Read the article

• Staring Shotgun with Thin as server using SSL

  - by Bryan Paronto

  I have a Facebook app I'm developing locally. I've configure everything correctly to SSL development with Thin. I know that using a shotgun.rb file, I can pass options to Thin to get it to start in SSL mode, but I'm not exact sure how to pass these options. I'm thinking something like: Thin:Server::options[:ssl] = true Thin:Server::options[:ssl_cert_path] = /path/to/cert/ Restarting thin constantly is getting old, so I'd really like to be able to use shotgun in development.

  Read the article

• Using a boost::fusion::map in boost::spirit::karma

  - by user1097105

  I am using boost spirit to parse some text files into a data structure and now I am beginning to generate text from this data structure (using spirit karma). One attempt at a data structure is a boost::fusion::map (as suggested in an answer to this question). But although I can use boost::spirit::qi::parse() and get data in it easily, when I tried to generate text from it using karma, I failed. Below is my attempt (look especially at the "map_data" type). After some reading and playing around with other fusion types, I found boost::fusion::vector and BOOST_FUSION_DEFINE_ASSOC_STRUCT. I succeeded to generate output with both of them, but they don't seem ideal: in vector you cannot access a member using a name (it is like a tuple) -- and in the other solution, I don't think I need both ways (member name and key type) to access the members. #include <iostream> #include <string> #include <boost/spirit/include/karma.hpp> #include <boost/fusion/include/map.hpp> #include <boost/fusion/include/make_map.hpp> #include <boost/fusion/include/vector.hpp> #include <boost/fusion/include/as_vector.hpp> #include <boost/fusion/include/transform.hpp> struct sb_key; struct id_key; using boost::fusion::pair; typedef boost::fusion::map < pair<sb_key, int> , pair<id_key, unsigned long> > map_data; typedef boost::fusion::vector < int, unsigned long > vector_data; #include <boost/fusion/include/define_assoc_struct.hpp> BOOST_FUSION_DEFINE_ASSOC_STRUCT( (), assocstruct_data, (int, a, sb_key) (unsigned long, b, id_key)) namespace karma = boost::spirit::karma; template <typename X> std::string to_string ( const X& data ) { std::string generated; std::back_insert_iterator<std::string> sink(generated); karma::generate_delimited ( sink, karma::int_ << karma::ulong_, karma::space, data ); return generated; } int main() { map_data d1(boost::fusion::make_map<sb_key, id_key>(234, 35314988526ul)); vector_data d2(boost::fusion::make_vector(234, 35314988526ul)); assocstruct_data d3(234,35314988526ul); std::cout << "map_data as_vector: " << boost::fusion::as_vector(d1) << std::endl; //std::cout << "map_data to_string: " << to_string(d1) << std::endl; //*FAIL No 1* std::cout << "at_key (sb_key): " << boost::fusion::at_key<sb_key>(d1) << boost::fusion::at_c<0>(d1) << std::endl << std::endl; std::cout << "vector_data: " << d2 << std::endl; std::cout << "vector_data to_string: " << to_string(d2) << std::endl << std::endl; std::cout << "assoc_struct as_vector: " << boost::fusion::as_vector(d3) << std::endl; std::cout << "assoc_struct to_string: " << to_string(d3) << std::endl; std::cout << "at_key (sb_key): " << boost::fusion::at_key<sb_key>(d3) << d3.a << boost::fusion::at_c<0>(d3) << std::endl; return 0; } Including the commented line gives lots of pages of compilation errors, among which notably something like: no known conversion for argument 1 from ‘boost::fusion::pair’ to ‘double’ no known conversion for argument 1 from ‘boost::fusion::pair’ to ‘float’ Might it be that to_string needs the values of the map_data, and not the pairs? Though I am not good with templates, I tried to get a vector from a map using transform in the following way template <typename P> struct take_second { typename P::second_type operator() (P p) { return p.second; } }; // ... inside main() pair <char, int> ff(32); std::cout << "take_second (expect 32): " << take_second<pair<char,int>>()(ff) << std::endl; std::cout << "transform map_data and to_string: " << to_string(boost::fusion::transform(d1, take_second<>())); //*FAIL No 2* But I don't know what types am I supposed to give when instantiating take_second and anyway I think there must be an easier way to get (iterate over) the values of a map (is there?) If you answer this question, please also give your opinion on whether using an ASSOC_STRUCT or a map is better.

  Read the article

• PCA extended face recognition

  - by cMinor

  The state of the art says that we can use PCA to perform face recognition. like this, this or this I am working with a project that involves training a classifier to detect a person who is wearing glasess or hats or even a mustache. The purpose of doing this is to detect when a person that has robbed a bank, store, or have commeted some sort of crime(s) (we have their image in a database), enters a certain place ( historically we know these guys have robbed, so we should take care to avoid problems). We came first to have a distributed database with all images of criminals, then I thought to have a layer of them clasifying these criminals using accesories like hats, mustache or anything that hides their face etc... Then, to apply that knowledge to detect when a particular or a suspect person enters a comercial place. ( In practice when someone is going to rob not all the times they are using an accesorie...) What do you think about this idea of doing PCA to first detect principal components of the face and then the components of an accesory. I was thinking that maybe a probabilistic approach is better so we can compute the probability the criminal is the person that entered a place and call the respective authorities.

  Read the article

• Stop Visual Studio from appending numbers to the end of new controls

  - by techturtle

  I am wondering if there is any way to stop Visual Studio 2010 from appending a number to the end of the ID on new controls I create. For example, when I add a new TextBox, I would prefer that it do this: <asp:TextBox ID="TextBox" runat="server"> <asp:TextBox ID="TextBox" runat="server"> <asp:TextBox ID="TextBox" runat="server"> Instead of this: <asp:TextBox ID="TextBox1" runat="server"> <asp:TextBox ID="TextBox2" runat="server"> <asp:TextBox ID="TextBox3" runat="server"> It would make it easier to rename them appropriately, so I don't have to arrow/mouse over and delete the number each time. As I was writing this, the "Questions that may already have your answer" suggested this: How do I prevent Visual Studio from renaming my controls? which admittedly was the biggest part of my annoyance, but that appears to turn off putting in an ID="" field altogether, not just for pasted controls. It would still be helpful to turn off the numbering for new, non-pasted controls and have it not rename pasted ones as well. At the moment I'm working with ASP.NET, but it would be nice if it there was a way to do it for WinForms as well. Before anyone suggests it, I do know that allowing it to append the numbers prevents name conflicts should I not rename them appropriately. However, I would much rather have it fail to compile so I know to fix the issue now (if I forget to name something properly) rather than find random "TextBox1" items lying around in the code later on.

  Read the article

• Why does some images not display in different browsers?

  - by RePRO

  I've unreal problem. I have a site, where are displaying images over an classical <img> tag. All images are loading from the database, where is URL column of the image. My problem is that three of ten images are not display. But if I open the source code and click at the URL of the image, I can see image. In source code is some looks like (just for a simple example): <img src = "http://some.image/1.jpg" alt = "description" height = "140" width = "187" /> But the biggest snag is that Opera displays all images correct, but just in FF, IE, Chrome are mentioned problems. I can not provide a screenshots, because the pages are a bit perverse. How can I show the site where the problem is? Or some advice? Thank you.

  Read the article

• Downloading a file from a PHP page in C#

  - by FoxyShadoww

  Okay, we have a PHP script that creates an download link from a file and we want to download that file via C#. This works fine with progress etc but when the PHP page gives an error the program downloads the error page and saves it as the requested file. Here is the code we have atm: PHP Code: <?php $path = 'upload/test.rar'; if (file_exists($path)) { $mm_type="application/octet-stream"; header("Pragma: public"); header("Expires: 0"); header("Cache-Control: must-revalidate, post-check=0, pre-check=0"); header("Cache-Control: public"); header("Content-Description: File Transfer"); header("Content-Type: " . $mm_type); header("Content-Length: " .(string)(filesize($path)) ); header('Content-Disposition: attachment; filename="'.basename($path).'"'); header("Content-Transfer-Encoding: binary\n"); readfile($path); exit(); } else { print 'Sorry, we could not find requested download file.'; } ?> C# Code: private void btnDownload_Click(object sender, EventArgs e) { string url = "http://***.com/download.php"; WebClient client = new WebClient(); client.DownloadFileCompleted += new AsyncCompletedEventHandler(client_DownloadFileCompleted); client.DownloadProgressChanged += new DownloadProgressChangedEventHandler(ProgressChanged); client.DownloadFileAsync(new Uri(url), @"c:\temp\test.rar"); } private void ProgressChanged(object sender, DownloadProgressChangedEventArgs e) { progressBar.Value = e.ProgressPercentage; } void client_DownloadFileCompleted(object sender, AsyncCompletedEventArgs e) { MessageBox.Show(print); }

  Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >