Monthly Archives

Articles indexed in March 2011

Page 212/223 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• CentOS 5.5 APIC issue on ESX 4.1 & ML115

  - by Adnan

  Hi, I've just installed vSphere 4.1 on an HP ProLiant ML115 G5 Quad-core and am trying to install CentOS 5.5 as a guest system. However, when the guest boots up I get a calibrate_APIC_clock warning and a kernel panic message. I've come across this knowledge base article on the vmware website which suggests moving the guest onto another Intel based host (!). Funnily enough I don't have a collection of spare host servers sitting around, so can anyone suggest another solution? Alternatively, would installing an earlier version of CentOS get around this issue, or would a yum update put me back to square one? How about BIOS settings, could anything be tweaked there? Thanks.

  Read the article

• mysqladmin - Unknown MySQL server host

  - by ert

  I'm trying to connect to a mysql server over a local network. The server is running and listening to post 41322. dylan~$ netstat -ln | s mysql unix 2 [ ACC ] STREAM LISTENING 41322 /var/run/mysqld/mysqld.sock My user is granted all rights from all addresses, and I can log in locally. dylan~$ mysqladmin -P 41322 -h [email protected] create database test mysqladmin: connect to server at '[email protected]' failed error: 'Unknown MySQL server host '[email protected]' (1)' Check that mysqld is running on [email protected] and that the port is 41322. You can check this by doing 'telnet [email protected] 41322' Adding a --verbose flag gives no additional output. I've commented out bind-address=127.0.0.1 in /etc/mysql/my.cnf on the server. I can ssh into the server without a problem. dylan~$ ps a | grep mysql 11131 pts/3 S 0:00 /bin/sh /usr/bin/mysqld_safe 11170 pts/3 Sl 0:03 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --port=3306 --socket=/var/run/mysqld/mysqld.sock 11171 pts/3 S 0:00 logger -p daemon.err -t mysqld_safe -i -t mysqld 13710 pts/1 S+ 0:00 grep mysq Any help or thoughts are appreciated.

  Read the article

• How to I set up nfs using the Drobo Unfsd app?

  - by Jan Aagaard

  How do I set up my nfs on my Drobo FS so that I can connect to it from my Mac using the NFS protocol? I have downloaded and installed Unfsd program from the DroboApps page. My exports file looks like this: /mnt/DroboFS/Shares 192.168.1.0/255.255.255.0(rw,no_root_squash) I try to connect to the share by hitting Ctrl+K in Finder and the using nfs://drobo-fs.local/Shares as server address. But when I click Connect all that happens is that the Connect to Server window flashes shortly, and well, that's all. I have tried removing the /Shares part, using /Public and casing drobo-fs.local as Drobo-FS.local, but it's all with the same result. I have also tried using /mnt/DroboFS/Shares *(rw,no_root_squash) in the exports file. I restart the service using the command ./service.sh restart.

  Read the article

• core temperature vs CPU temperature

  - by Karl Nicoll

  I have recently installed a new heat sink & fan combination on my Core 2 Quad since my CPU was hitting about 70C under load. This has managed reduce temperatures while running Prime95 to about 54C, which I'm taking as a win (this is ~30 minutes after fitting). I'm a little confused though. The temperature readings given above are for CORE temperatures, but HWMonitor is showing a 5th "CPU" temperature (4 temperatures being the individual core temps) which is showing 21C idle, when idle temperatures for the cores vary between 37C and 42C. I guess there are two questions here: Are my CPU/Core temperatures decent, and is it safe to overclock when these are stock clock temperatures? I gather that the maximum safe operating temperature for a C2Q is ~70C, so which temperature should I measure against, the core temperatures (which are higher), or the CPU temperature reading?

  Read the article

• Unix mail question

  - by InBetween

  I'm wondering where some information came from in a message I got on my Mac laptop. Here's the message: From [email protected] X-Original-To: john Delivered-To: [email protected] From: [email protected] (Cron Daemon) To: [email protected] ... Where did it get the "[email protected]" I know my username is john, and my computer is leutenberg, but where did it get the horners.org part? Thanks.

  Read the article

• Why isn't Synergy working for me?

  - by Anthony

  It worked for about a week then stopped working. I'm trying to make it work between a Windows 7 laptop and a Windows XP laptop. My router is a Linksys E1000. I tried uninstalling and reinstalling the program multiple times. I've tried port forwarding. I've tried making exceptions in the firewall. I've tried disabling the firewalls. It might be relevant also that Input Director doesn't work either. What am I doing wrong?

  Read the article

• Natively open .doc or .odt file in LaTex

  - by MaQleod

  I have looked at ways to convert word or open office text files to LaTex format, and those have been addressed on SU here and here. These will work, but I'd rather have a native single-step solution. Does anyone know of any module or add-on for LaTex that will let one open .doc and/or .odt files without the use of third-party conversion tools? It would be ideal if it would allow for editing and saving in the same format. If it makes any difference, I am using LaTex Editor in Windows.

  Read the article

• NetBSD Networking

  - by Mike

  Hello, everyone! I have an old Toshiba Satellite 4015CDT, with Pentium II MMX, 32MB RAM, 4GB HDD. It also has one USB 1.0 port, parallel and serial ports, a 3.5" floppy drive and a CD-ROM drive (probably almost dead). I've installed NetBSD on this machine (full install) and now I want to connect it to the Internet. Although it has one PCMCIA modem card in it, it is obviously not an option. I've narrowed down my available options to the following: Connect a USB wireless adapter. I have a Realtek RTL8192 adapter, but although the system gives me the device's name (through dmesg) it fails to recognize it as a network adapter. Connect the laptop to another machine through a serial connection, so that the other machine will serve as a bridge to the Internet. Here is the page from the NetBSD documentation on serial connections. Unfortunately, I was not able to find anything on bridging there. I would very much appreciate your suggestions on the topic. Thanks in advance.

  Read the article

• Windows XP does not list WPA wireless networks

  - by Tomalak

  What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

  Read the article

• WinXP: File Record Segment nnnn is unreadable?

  - by chris

  I'm pretty sure that the drive is toast, except for the fact that this error is only showing up on one partition (it's out of a Dell computer, and has a couple of Dell partitions, which boot and work fine.) I've already purchased another hard drive, and re-installed WinXP, but when I re-connect this drive and reboot, I'm getting thousands of these errors. Is there any chance of recovering any files off this? Should I prevent XP from trying to resolve the problems?

  Read the article

• How to disable text overwrite mode in Netbeans (CentOS)?

  - by Kevin Lee

  Everytime I type some text, it is overwriting what I have typed. I assume that the mode is set to overwriting, I want to insert the text not overwrite it, but I can't disable it because my insert key is mixed up with my delete key so everytime I enter insert to disable the overwrite mode, it just delete what I type. So how to disable this? I'm using centOS.. and it seems that my problem is only related to Netbeans because when I type here, it is set to insert mode.. but in Netbeans, it just overwrites the codes! help!

  Read the article

• Two questions about restoring Thunderbird from a backup

  - by Eric

  Setting up a new Windows 7 PC, I'm puzzled by two things in Thunderbird 3.1.9: I restored a profile from a three-month old backup, no problem. I then copied more recent files into the Mail/ directory, but TBird still shows the old messages. The last message in Inbox is dated 3/16/2011 -- how do I get TBird to display all the messages in the Local Folders/Inbox view? A large number of the existing messages are now displayed in separate tabs -- I can't tell you how many, but there could be over 1000. Which file governs this? Or can I hire someone from Mechanical Turk to come over and manually close each tab?

  Read the article

• Load website and fill form from the command line

  - by Martin Scharrer

  Using the Linux command line (Bash shell) I like to load a specific website in my browser (normally Firefox, but other one would be ok as well as long it runs under Linux) and fill a pre-defined form with some data. Actually, this should run from a Makefile. Most of the form data is static and will be stored as variables in the Makefile, just some fields are to be filled manually before manually sending the form. I know how to load the website in question from the command line using: firefox <URL> But there seems no possibility to fill the form automatically with variables given on the command line. Is there a plugin, executable or JavaScript which allows me to do this? Any suggestions and hints are welcome. I don't mind coding some JavaScript.

  Read the article

• New hard drive for backup? [closed]

  - by glaeven

  I have come to realize that I need another external drive to use with my MacBook Pro. I currently have a 1TB WD MyBook Essential that I have been using for about a year and a half. I have it currently partitioned into two drives, one for backup (I named it Leonov) and one for movies, TV shows and other large files I don't need very often (I call that side Discovery One). I use Time Machine for backups since it is completely automated and I can restore from it without much trouble (I have had to at least three times now). As of now, Leonov is full enough that every backup deletes an old one and Discovery One is approaching it's limits. I would like to get a new drive and move one of the sides to it. What are some reliable, external (~1TB) drives for under or around $100? Would it be easier to move the movies (et al.) or the backups to the new drive? I also feel like I should say that all of my important documents (for school and the like, just not my music) are also synced to Dropbox as another form of backup and access.

  Read the article

• Why isn't SSL/TLS built into modern Operating Systems?

  - by Channel72

  A lot of the basic network protocols that make up the infrastructure of the Internet are built in to most major Operating Systems. Things like TCP, UDP, and DNS are all built into Linux, UNIX and Windows, and are made available to the programmer through low-level system APIs. But when it comes to SSL or TLS, one has to turn to a third-party library such as OpenSSL or Mozilla NSS. SSL is a relatively old protocol, and it's basically an industry standard as ubiquitous as TCP/IP, so why isn't it built into most Operating Systems?

  Read the article

• Are there real world applications where the use of prefix versus postfix operators matters?

  - by Kenneth

  In college it is taught how you can do math problems which use the ++ or -- operators on some variable referenced in the equation such that the result of the equation would yield different results if you switched the operator from postfix to prefix or vice versa. Are there any real world applications of using postfix or prefix operator where it makes a difference as to which you use? It doesn't seem to me (maybe I just don't have enough experience yet in programming) that there really is much use to having the different operators if it only applies in math equations. EDIT: Suggestions so far include: function calls //f(++x) != f(x++) loop comparison //while (++i < MAX) != while (i++ < MAX)

  Read the article

• Is there any evidence that lisp actually is better than other languages at artificial intelligence?

  - by Joe D

  I asked this question on SO but it was closed fairly promptly (within 3 minutes) because it was too subjective. I then thought to ask it here on Programmers, a site for "subjective questions on software development". Quoting from the original question: There seems to be a long-held belief (mainly by non-lispers) that lisp is only good for developing AI. Where did this belief originate? And is there any basis in fact to it?

  Read the article

• Why isn't LISP more widespread?

  - by Andrea

  I am starting to learn Scheme by the SICP videos, and I would like to move to Common Lisp next. The language seems very interesting, and most of the people writings books on it advocate that it has unequalled expressive power. CL seems to have a decent standard library. Why is not Lisp more widespread? If it is really that powerful, people should be using it all over, but instead it is nearly impossible to find, say, Lisp job advertisements. I hope it is not just the parenthesis, as they are not a great problem after a little while.

  Read the article

• What is a "cross-functional team" actually?

  - by Idsa

  The general meaning of "cross-functional team" is a team which combines specialists in different fields that are required to reach the goal. But it looks like in Agile cross-functionality means not only combining different specialists, but making them mix. Henrik Kniberg defines cross-functional team this way: "Cross-functional just means that the team as a whole has all skills needed to build the product, and that each team member is willing to do more than just their own thing." But where is the line drawn? Is it normal to ask developers to become testers for an iteration if it is required?

  Read the article

• Project Idea - Android

  - by Darren Young

  Hi, I am trying to come up with some project ideas for my final year at University, and I think that I have one that would offer be a (massive) challenge, and something I could potentially make money from. I just want to check something. Is it possible(from a photograph), to be able to determine somebodys face and the individual parts of that face - eyes, ears, nose, etc? This will probably be via Android. Thanks.

  Read the article

• OpenID implementation - PHP, Javascript, MySQL

  - by Marc A.

  Hello, I've started doing some research on the technologies that I will need for my website. I'm trying to implement a really simple website with OpenID user registration. The website will store a block of text for each user. I imagine this means that I will need a database with: User ID Open ID url Data Having said that, I'm still having trouble deciding what I really need to do this. I know that I will need the following for the actual site: Javascript JQuery CSS But on the back end, I'm kind of lost at the moment. I've been looking at the OpenID-Selector, which is coded in Javascript. It seems like it's exactly what is used on this site. Will I actually need PHP? MySQL for the data and user registration? Thanks for the kickstart!

  Read the article

• How might one teach OO without referencing physical real-world objects?

  - by hal10001

  I remember reading somewhere that the original concepts behind OO were to find a better architecture for handling the messaging of data between multiple systems in a way that protected the state of that data. Now that is probably a poor paraphrase, but it made me wonder if there is a way of teaching OO without the (Bike, Car, Person, etc.) object analogies, and that instead focuses on the messaging aspects. If you have articles, links, books, etc., that would be helpful.

  Read the article

• Does Agile force developers to work more?

  - by Shooshpanchick

  Looking at common Agile practices it seems to me that they (intentionally or unintentionally?) force developer to spend more time actually working as opposed to reading blogs/articles, chatting, coffee breaks and just plain procrastinating. In particular: 1) Pair programming - the biggest work-forcer, just because it is inconvenient to do all that procrastination when there are two of you sitting together. 2) Short stories - when you have a HUGE chunk of work that must be done in e.g. a month, it is pretty common to slack off in the first three weeks and switch to OMG DEADLINE mode for the last one. And with the little chunks (that must be done in a day or less) it is exact opposite - you feel that time is tight, there is no space for maneuvering, and you will be held accountable for the task pretty soon, so you start working immediately. 3) Team communication and cohesion - when you underperform in a slow, distanced and silent environment it may feel ok, but when at the end of the day at Scrum meeting everyone boasts what they have accomplished and you have nothing to say you may actually feel ashamed. 4) Testing and feedback - again, it prevents you from keeping tasks "99% ready" (when it's actually around 20%) until the deadline suddenly happens. Do you feel that under Agile you work more than under "conventional" methodologies? Is this pressure compensated by the more comfortable environment and by the feeling of actually getting right things done quickly?

  Read the article

• Constructor should generally not call methods

  - by Stefano Borini

  I described to a colleague why a constructor calling a method can be an antipattern. example (in my rusty C++) class C { public : C(int foo); void setFoo(int foo); private: int foo; } C::C(int foo) { setFoo(foo); } void C::setFoo(int foo) { this->foo = foo } I would like to motivate better this fact through your additional contribute. If you have examples, book references, blog pages, or names of principles, they would be very welcome. Edit: I'm talking in general, but we are coding in python.

  Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >