Monthly Archives

Articles indexed in September 2012

Page 221/470 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

  • Cannot login as root to centos server

    - by perpetual_dream
    I used to login as :ssh root@servip with a password authentication into my centos 6 server. I am not sure if what I have done has caused this, but while trying to get over my problem of accessing webmin remotely I followed the following tutorial until I reached: adding auth required pam_google_authenticator.so into /etc/pam.d/sshd. Then by mistake, I have closed the ssh session. When I tried to login in back with the usual password, I get: Permission denied, please try again error. How can I get over this problem? I don't have a physical access to the server.

    Read the article

  • HP p410i array controller - what happens if i add memory?

    - by James
    I have a p410i array controller that only has 256ram. We want to create a raid 5 so we have procured a 512 write back cache module. If we install the write back cache, will this erase the existing raid information. The server currently has 2 disks in raid 1. 6 are spare waiting for an upgrade to create a raid 5. the concern is if we replace/upgrade the memory for the controller, we will wipe the existing production raid 1 array. Thanks in advance.

    Read the article

  • Desktop Provisioning for a Small Linux Software Development Team

    - by deakblue
    Goal: Get a small team using a standard development image rather than 4 software devs setting up their own environments. Why: it takes a day or days to install a distro, build-specific libraries, tools like editors and IDEs, mysql, couchdb, java, maven, python, android-sdk, etc. It's a giant PITA that when repeated 4 times by 4 developers (not sys admins) wastes time and generates annoying divergences that crop up later (it-builds-on-my-box syndrome). There's no sharing of productivity, settings, tricks, scripts, set-ups. Some of this is helped by segregating the build systems into headless virtualbox images. This doesn't really address tooling though or the GUI-desktop dev that needs doing. So I see three basic strategies, ghosting, virtualization, and finally creating a kind of in-house linux distro (I guess Google does something like this). The target dev environment is based on Debian OpenBox and must allow a mix of 3rd gen Core i7 notebooks 8GB-minimum to work both single and multihead. Important, the lappies are not the same, but a mix of 2012 macbooks and PCs. So: virtualization: is doing all of your work within a VM, like VirtualBox, practical on this hardware or annoying. ghosting: will laptops from different manufacturers make this impractical. DIY distro: short of scripting a bunch of package installs, I don't know if there's any "distro-maker" that could keep this from being an epic project of scripting package installs. So any advice?

    Read the article

  • Wifi in android-x86 with virtual box [closed]

    - by Abhishek
    I am trying to run android-x86 in Virtualbox, I am using a laptop which connects to internet via WiFi. When the android starts in virtual box, it does not recognize the host wireless connection or in other words does not identify the wireless network at all. So I got a TP-Link wireless USB adapter connected to the laptop and configured wireless controller in USB for the VM. But sadly I found that the wireless is disabled as soon as the Android VM starts. I am stuck on how to let android running in Virtualbox identify my Wifi. Any guidelines or set up instructions would be greatly helpful.

    Read the article

  • Different settings for secure & non-secure versions of Django site using WSGI

    - by Jordan Reiter
    I have a Django website where some of the URLs need to be served over HTTPS and some over a normal connection. It's running on Apache and using WSGI. Here's the config: <VirtualHost example.org:80> ServerName example.org DocumentRoot /var/www/html/mysite WSGIDaemonProcess mysite WSGIProcessGroup mysite WSGIScriptAlias / /path/to/mysite/conferencemanager.wsgi </VirtualHost> <VirtualHost *:443> ServerName example.org DocumentRoot /var/www/html/mysite WSGIProcessGroup mysite SSLEngine on SSLCertificateFile /etc/httpd/certs/aace.org.crt SSLCertificateKeyFile /etc/httpd/certs/aace.org.key SSLCertificateChainFile /etc/httpd/certs/gd_bundle.crt WSGIScriptAlias / /path/to/mysite/conferencemanager_secure.wsgi </VirtualHost> When I restart the server, the first site that gets called -- https or http -- appears to select which WSGI script alias gets used. I just need a few settings to be different for the secure server, which is why I'm using a different WSGI script. Alternatively, it there's a way to change settings in the settings.py file based on whether the connection is secure or not, that would also work. Thanks

    Read the article

  • .htaccess does not ask the password

    - by Sarp Kaya
    I am using Ubuntu 12.04 and trying to use .htaccess on a page with apache2 server on it. My .htaccess file looks like this: AuthType Basic AuthName "Password Required" AuthBasicProvider file AuthUserFile /home/janeb/.htpasswd require valid-user /home/janeb/.htpasswd file is: inb351:$apr1$Ya4tzYvr$KCs3eyK1O2/c7Q9zRcwn.. and /etc/apache2/sites-available/default file is : UserDir public_html <Directory ~ "public_html/.*"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> I restarted apache. I have tried to change require valid-user to require user inb351. Still no luck. I also tried AllowOverride with AuthConfig and AuthConfig Indexes. So I don't know what else to do, and yes every step that I have tried I restarted apache.

    Read the article

  • Mac Server bizzare routing table

    - by The Unix Janitor
    My mac routing table usually is very simple. I know it's based on bsd , but what's it doing or trying to do. My routing table is usually very simple however, the second one, default was point to link5 ? Is this normal, or is this IPV6 craziness at work? Can somehelp me understand what OSX/BSD is doing? nternet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.254 UGSc 22 0 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 4 44102 lo0 169.254 link#5 UCS 0 0 en1 192.168.1 link#5 UCS 6 0 en1 192.168.1.1 0:18:39:6d:89:c5 UHLWIi 0 0 en1 739 192.168.1.189 50:ea:d6:86:26:91 UHLWIi 0 0 en1 798 192.168.1.194 127.0.0.1 UHS 0 0 lo0 192.168.1.203 5c:95:ae:dd:34:8d UHLWIi 0 0 en1 316 192.168.1.253 a:76:ff:b5:51:79 UHLWIi 0 0 en1 911 192.168.1.254 8:76:ff:b5:51:79 UHLWIi 32 204 en1 1117 192.168.1.255 ff:ff:ff:ff:ff:ff UHLWbI 0 7 en1 Internet6: Destination Gateway Flags Netif Expire ::1 link#1 UHL lo0 fe80::%lo0/64 fe80::1%lo0 UcI lo0 fe80::1%lo0 link#1 UHLI lo0 fe80::%en1/64 link#5 UCI en1 fe80::21b:63ff:fec7:c486%en1 0:1b:63:c7:c4:86 UHLI lo0 fe80::223:12ff:fe01:d7fe%en1 0:23:12:1:d7:fe UHLWIi en1 ff01::%lo0/32 fe80::1%lo0 UmCI lo0 ff01::%en1/32 link#5 UmCI en1 ff02::%lo0/32 fe80::1%lo0 UmCI lo0 ff02::%en1/32 link#5 UmCI en1 ----------------------------------- Bizzare routing table here Internet: Destination Gateway Flags Refs Use Netif Expire default link#5 UCS 113 0 en1 17.72.255.12 0:50:7f:5e:92:e2 UHLWIi 2 7 en1 1156 64.4.23.141 0:50:7f:5e:92:e2 UHLWIi 0 3 en1 1181 64.4.23.143 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1189 64.4.23.147 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 64.4.23.149 link#5 UHLWIi 0 1 en1 64.4.23.150 0:50:7f:5e:92:e2 UHLWIi 0 24 en1 1175 64.4.23.151 link#5 UHLWIi 0 1 en1 64.4.23.153 link#5 UHLWIi 0 1 en1 64.4.23.155 link#5 UHLWIi 0 1 en1 64.4.23.157 0:50:7f:5e:92:e2 UHLWIi 0 3 en1 1181 64.4.23.165 link#5 UHLWIi 0 2 en1 64.4.23.166 link#5 UHLWIi 0 1 en1 65.55.223.15 0:50:7f:5e:92:e2 UHLWIi 3 21 en1 1189 65.55.223.16 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 65.55.223.17 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1199 65.55.223.20 link#5 UHLWIi 0 1 en1 65.55.223.23 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1199 65.55.223.31 link#5 UHLWIi 0 1 en1 65.55.223.32 link#5 UHLWIi 0 1 en1 65.55.223.37 0:50:7f:5e:92:e2 UHLWIi 3 21 en1 1189 65.55.223.38 link#5 UHLWIi 0 1 en1 69.163.252.33 0:50:7f:5e:92:e2 UHLWIi 1 9 en1 1181 77.67.32.254 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1164 111.221.74.13 0:50:7f:5e:92:e2 UHLWIi 0 24 en1 1183 111.221.74.15 link#5 UHLWIi 0 1 en1 111.221.74.16 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 111.221.74.17 0:50:7f:5e:92:e2 UHLWIi 3 23 en1 1172 111.221.74.21 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 111.221.74.23 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1172 111.221.74.24 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1181 111.221.74.26 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1199 111.221.74.29 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1181 111.221.74.31 link#5 UHLWIi 0 1 en1 111.221.74.37 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1190 111.221.74.38 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1199 111.221.77.141 0:50:7f:5e:92:e2 UHLWIi 0 3 en1 1199 111.221.77.144 link#5 UHLWIi 0 1 en1 111.221.77.145 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1190 111.221.77.149 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 111.221.77.154 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 111.221.77.156 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1190 111.221.77.157 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 111.221.77.162 link#5 UHLWIi 0 1 en1 111.221.77.165 link#5 UHLWIi 0 1 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 4 40073 lo0 157.55.56.140 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1199 157.55.56.141 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 157.55.56.143 link#5 UHLWIi 0 1 en1 157.55.56.147 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 157.55.56.148 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 157.55.56.149 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1189 157.55.56.150 link#5 UHLWIi 0 1 en1 157.55.56.157 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1172 157.55.56.158 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1175 157.55.130.143 link#5 UHLWIi 0 1 en1 157.55.130.144 link#5 UHLWIi 0 1 en1 157.55.130.145 0:50:7f:5e:92:e2 UHLWIi 0 24 en1 1181 157.55.130.152 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1199 157.55.130.153 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1172 157.55.130.155 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1189 157.55.130.156 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1186 157.55.130.157 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1189 157.55.130.158 0:50:7f:5e:92:e2 UHLWIi 0 3 en1 1172 157.55.130.160 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1189 157.55.130.162 0:50:7f:5e:92:e2 UHLWIi 3 21 en1 1193 157.55.130.166 link#5 UHLWIi 0 1 en1 157.55.235.141 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1193 157.55.235.142 link#5 UHLWIi 1 1 en1 157.55.235.144 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1172 157.55.235.145 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1172 157.55.235.149 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 157.55.235.151 link#5 UHRLWIi 0 36 en1 157.55.235.152 0:50:7f:5e:92:e2 UHLWIi 3 21 en1 1189 157.55.235.153 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1178 157.55.235.156 link#5 UHLWIi 0 2 en1 157.55.235.157 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 157.55.235.158 link#5 UHLWIi 0 1 en1 157.55.235.159 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 157.55.235.162 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 157.55.235.166 0:50:7f:5e:92:e2 UHLWIi 0 25 en1 1181 157.56.52.14 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 157.56.52.15 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1183 157.56.52.16 link#5 UHLWIi 0 1 en1 157.56.52.17 0:50:7f:5e:92:e2 UHLWIi 3 14 en1 1199 157.56.52.19 link#5 UHLWIi 0 1 en1 157.56.52.20 0:50:7f:5e:92:e2 UHLWIi 3 17 en1 1199 157.56.52.22 0:50:7f:5e:92:e2 UHLWIi 0 24 en1 1181 157.56.52.25 link#5 UHLWIi 0 1 en1 157.56.52.28 link#5 UHLWIi 0 1 en1 157.56.52.29 link#5 UHLWIi 0 1 en1 157.56.52.31 link#5 UHLWIi 0 1 en1 157.56.52.33 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1189 169.254 link#5 UC 1 0 en1 169.254.174.250 127.0.0.1 UHS 1 0 lo0 169.254.255.255 ff:ff:ff:ff:ff:ff UHLWb 0 2 en1 193.88.6.19 link#5 UHLWIi 0 1 en1 194.165.188.82 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1166 195.46.253.211 link#5 UHLWIi 0 1 en1 204.9.163.143 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1178 213.199.179.141 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1172 213.199.179.142 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1165 213.199.179.143 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1166 213.199.179.146 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1172 213.199.179.147 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1164 213.199.179.148 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1165 213.199.179.149 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1172 213.199.179.150 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1165 213.199.179.151 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1164 213.199.179.153 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1166 213.199.179.157 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1167 213.199.179.160 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1165 213.199.179.161 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1172 213.199.179.162 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1163 213.199.179.165 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1164 213.199.179.166 0:50:7f:5e:92:e2 UHLWIi 0 3 en1 1164 224.0.0.251 1:0:5e:0:0:fc UHmLWI 0 0 en1 255.255.255.255 ff:ff:ff:ff:ff:ff UHLWbI 0 2 en1 Internet6: Destination Gateway Flags Netif Expire ::1 link#1 UHL lo0 fe80::%lo0/64 fe80::1%lo0 UcI lo0 fe80::1%lo0 link#1 UHLI lo0 fe80::%en1/64 link#5 UCI en1 fe80::21b:63ff:fec7:c486%en1 0:1b:63:c7:c4:87 UHLI lo0 fe80::223:12ff:fe01:d7fe%en1 0:23:12:1:d7:ff UHLWIi en1 ff01::%lo0/32 fe80::1%lo0 UmCI lo0 ff01::%en1/32 link#5 UmCI en1 ff02::%lo0/32 fe80::1%lo0 UmCI lo0 ff02::%en1/32 link#5 UmCI en1

    Read the article

  • How does hadoop decide what its nodes hostnames are?

    - by Dan R
    Currently the urls generated by the jobtracker & namenode return either hostnames like bubbles.local or just bubbles. These end up not resolving unless the client machine has specified these in their /etc/hosts file. When I run the hostname command on these machines it returns a hostname complete with the domain (E.G bubbles.example.com) Running a small java test on these machines InetAddress addr = InetAddress.getLocalHost(); byte[] ipAddr = addr.getAddress(); String hostname = addr.getHostName(); System.out.println(hostname); Produces output just like the hostname command. Where else could hadoop be grabbing a hostname to use in its jobtracker / namenode UI? This is occurring in clusters with Hadoop 1.0.3 and 1.0.4-SNAPSHOT from early august. The machines are running CentOS release 5.8 (Final). The generated URLs I'm referring to are like this http://example:50075/browseDirectory.jsp?namenodeInfoPort=50070&dir=/ or http://example.local:50075/browseDirectory.jsp?namenodeInfoPort=50070&dir=/

    Read the article

  • Exclude minify from CSF/LFD

    - by Patrick Lanfranco
    I have currently installed minify on on of my websites however I am currently getting hammered with email from CSF/LFD. Example: Time: Fri Aug 10 13:10:03 2012 +0700 File: /tmp/minify_builder,index.php_f516d1c7cae9c3881406fd9a0ce69c38 Reason: Script, file extension Owner: -:- (504:501) Action: No action taken What is the best way to have these ignored inside CSF? Some advice would be highyl appreciated. Thank you very much.

    Read the article

  • Using Powershell's Invoke-command to install .exe on remote computer

    - by Bernie
    I have an .exe I would like to install on a large farm of Windows Server 2008 computers. I am attempting to use Powershell remoting. I have this command which works locally: invoke-command {& "N:\Temp\fortify_installer\HP-Fortify-3.20-Analyzers_and_Apps-Windows-x86.exe /s /f1N:\Temp\fortify_installer\response.iss"} But when I add the -computername flag it seems to go off to nowhere, and the installer is never run on the remote machine. I can launch notepad.exe via the same command and it runs. Does it have something to do with it being an installer, or something else? I realize many versions of this question have been asked and I have read them, but I am still confused as to why this doesn't work.

    Read the article

  • Slow performance on VMWare Linux server after Tomcat install

    - by Loftx
    We have a VMWare ESXi 4.1 server hosting a number of Linux and Windows guests. Recently a new Linux guest was added to this server and seemed to be performing well. Tomcat and some other applications on this server were then installed which seem to have caused the server to run really slowly without any obvious resource issues. Slow performance include: The time taken to bring up the password prompt over ssh takes a few seconds when it was previously instantaneous. The time taken to unzip a zip file which was previously a few seconds now takes around 30 seconds The time taken to compile vmware tools has increased by similar factors Both the VMWare console and monitoring commands don't report any issues with high CPU or memory usage but something is obviously slowing the server down somehow. Does anyone have any ideas what may be causing this issue and how it can be resolved? Thanks, Tom Edit As per your questions I’ve looked at some of the performance indicators on both the VM host and VM guest indicated. Firstly I tried reserving the full amount of memory (3gb) for this VM – no other machines on this server have any memory reservation. The swap in rate and swap out rate for the VM host and guest are now both zero. Balloon memory on the guest is zero and on the host is 3.5gb (total memory on the host is 12gb) The swap rate for the guest is also zero. Swap used by the host is 200mb on average. Compression and decompression rates for the host and guest are zero. Command aborts for the host are zero. Read latency is very low – maximum 10ms average 0.8ms. Write latency is higher – a few spikes to 170ms but mostly around 25ms – is this bad? Queue command latency is zero . Physical disk read latency averages 5ms but often 10ms Physical disk write latency averages 15ms but is often 20ms I hope this helps - let me know if you need any more information.

    Read the article

  • sharepoint 2007 access denied when accessing user profiles via ssp

    - by user22215
    Guys I have a really strange problem in regards to sharepoint mysites today I go into user profiles and properties in order to setup a property all of a sudden I get access denied. First off I know that I'm logged in with the correct account after the access denied I decided to click on personalization services and permissions I than get An unhandled exception occurred in the user interface.Exception Information: Cannot complete this action. I'm not seeing anything in the server application logs either. So have any of you guys seen this before is there some kind of way to grant a user account the manage profiles right permission using stsadm. BTW all other fucntions of the ssp are working fine so my question is if the user profiles and my sites of a ssp tanks how do you repair that portion of the ssp? BTW the user accounts that I'm using are site collection owners and also they have full control at the web application level. I actually ran across this interesting post but this does not really help my problem. http://blog.tylerholmes.com/2008/09/access-denied-for-site-collection.html

    Read the article

  • Full Control Over CD/DVD burning

    - by Hypertext
    Suppose I want to burn just the 6000th byte(if thats not possible say the 10th sector) on a CDR without touching anyother region. Sounds possible but is there any tool to accomplish this. Yeah sure, there may be no clear point doing this but is this possible technically?. (Doesnt matter maintaining the CDFS, integrity or whatever standard here. Just the task.) It would be great to know if there are any software regarding this.

    Read the article

  • Homebrew requires something uninstall-developer-folder removes

    - by Blacklight Shining
    I was having trouble installing irssi (brew install irssi), so I ran brew doctor, which returned a warning mentioning an outdated copy of Xcode and saying I should run /Developer/Library/uninstall-developer-folder. Then I ran brew doctor again and got: Error: No such file or directory - /Developer/SDKs/MacOSX10.6.sdk How do I reinstall the SDK, or is there another way to get Homebrew working again? UPDATE: /Developer actually still exists (despite the obvious implication of uninstall-developer-folder), as does /Developer/SDKs/MacOSX10.7.sdk. Why does Homebrew specifically need Snow Leopard's SDK?

    Read the article

  • Redirecting output from syslog to own log

    - by w0rldart
    So I'm following this tutorial: http://www.howtoforge.com/using-fail2ban-to-block-wrong-ispconfig-logins and the problem I have is that rsyslog won't redirect the output from a file to another /etc/rsyslog.d/12-ispconfig.conf: if $programname == 'ispconfig' then /var/log/ispconfig.log #the file exists But I keep getting the output to syslog: ispconfig[1117]: Login failed for user asdasd on IP XX.XX.XXX.XX Any ideas how to fix this?

    Read the article

  • Pc sometimes turns on sometimes not

    - by cprogcr
    Some time ago, the PC gave the same problem. It wouldn't turn on. When i pressed the button, it turned on but showed nothing. I had replaced the CPU and that seemed to work. I didn't use the PC that much, rarely you know. But now, after some time, it gives the same problem. It turns on, the front light is on, it makes the normal noise the pc makes when it's turned on , but if I try to shut it down by holding the power button it just doesn't work. So again, I tried replacing the CPU and it worked again. I kept it all day working, just to be sure, and sometimes I would restart it and it would work again. No problems at all. So I turned it off at night, and next morning it just would make the same problem. So I tried replacing the PSU. And it worked again. Now while I had the PC with the new PSU, i tried to insert the old CPU, and again, it would turn on. The same thing, tried restarting too, and it would work. But this morning the same problem happened. Edit: I also tried another CPU today and yet no signs of working. I don't know now what to think.

    Read the article

  • hdmi output of windows 7 does not stay alive

    - by sjors miltenburg
    I have built a server that is connected to ONLY my tv (with hdmi). If I switch my tv to hdmi and boot my server I get the expected result (windows is displayed on my tv) and I can fully interact with it, no problem. However when "some time" passes the image on my tv dissapears and it seems the server is not outputting any hdmi signal anymore. It does not wake up on mousemove or keyboard presses. I can still interact with my server through a remote desktop session. The only way to get the hdmi output back is to reboot the server. I tried to prevent the computer from "sleeping" but this did not work. I tried upgrading from windows vista to windows 7 but this also did not work. Do you guys have any other ideas?

    Read the article

  • Windows sometimes minimizes game and shows the desktop?

    - by Gary
    For some reason, every once in a while when I'm playing a full-screen game in Windows 7, the game will minimize and focus will be given to the Desktop. I don't know what does this because no other problem appears to activate (nothing new in the taskbar or system tray appears). This occurs in a variety of games, from a variety of publishers, so it's definitely not the game that's having the problem. When this occurs, I can simply click on the game to go back to it, but it's obviously still quite annoying. Anyone know what's going on here? Is this a common occurrence with a simple fix? Thanks in advance!

    Read the article

  • Firefox Vimperator - how to offset link hints?

    - by danns87
    I learned how to change the size of hints by modifying fields in the :highlight Hint CSS. I made the hint numbers a big bigger, and as a result they overlap with the hints they're hinting to. (I'd love to post a picture but apparently I'm not entitled to that luxury yet, so I hope I'm clear enough...) How can I introduce an offset or some other sort of buffer between the hints and the links themselves?

    Read the article

  • dell latitude XT touch screen issue

    - by Jake
    yesterday I installed windows 7 ultimate after I had the enterprise version on this machine for a few months. the installation went smoothly and everything worked fine except for the finger detection of the screen(only the pen worked) and the bottom screen buttons for rotating and so. so I started to install all the missing drivers dell recommends for this model on their site, but once I tried to install N-Trig degitizer driver the installation said it was unsuccessful and since then the touch stopped working completely! I tried system restore but it didn't help so I went on and formatted the harddisk completely once again and installed windows but that didn't work either. I tried to install the N-Trig's driver but it was alarting for a fatal error and said that no device was detected. same story with N-Trig rollback. so I checked the device manager and saw an "unknown device" with VID and PID values set as 0000. I figured the N-Trig driver might have messed with the device firmware or something and now it doesnt know it's ID and munufactor... Is there anything that can be done? like forcing the N-Trig driver to install on this device or something? please help!

    Read the article

  • XBMC remote control key repeat

    - by Amigable Clark Kant
    Those who have used XBMC with a WiFi remote, such as an Android or iOS device with the official XBMC remotes, have probably seen this at one time or another: your remote stops working, when you press a key, that key is repeated very fast. Sometimes you can break the key repeat loop by pressing that same key again. Sometimes (as this particular morning) you can not. This problem has existed for literally years (it even occurs on the old XBOX only builds) but there seems to be no definite explanation as to what is causing it. I am asking for a workaround. (If you Google, you can find threads were people are ridiculed for bringing up this problem, which is one reason I ask here instead of on the official forums. Also the fact that this problem has persisted for so many years.) I am running, right now, XBMCBuntu Live Eden and the latest official iOS remote. Although, I have seen this problem on all combinations of remotes and XBMC versions I have tried over the years, which are many. (XBMC on Windows, Linux, OSX, remotes on Android and iOS.) Link to bug #136 for the Android remote. It's marked as "fixed" as of client version 636, but the problem is seen again in rev 730. Go figure. There is something fundamentally wrong with how keypresses are sent from the various remotes to XBMC, since this problem is seen across time, XBMC versions and iOS/Android.

    Read the article

  • How do I set FireFox 10.0.7 to always open link in new tab?

    - by johnnyknew
    I am wondering if there is a way in FireFox 10.0.7 to set the it so every time I click on a link it opens it in a new tab. I went to configuration mania and options and could not find it anywhere. I also checked on the about:config and found the browser.link.open_newwindow but was unsure what to change the value to to set it so new tabs are opened every time a link is clicked on. Thanks to whomever might help.

    Read the article

  • Western Digital Caviar SE16 not recognized

    - by NStorm
    Before I start, I have been looking at quite a few websites and I still have not found an answer to my problem. I have been building my own computer recently and I have just received the hard drive (WD Caviar SE16 WD5000AAKS) I was planning to put in my computer. After connecting the SATA power cable (99.99999% sure it is connected correctly) and the SATA cable to my motherboard (ASUS M5A78L-M/USB3) I booted my computer into a Linux Mint 13 XFCE 64-bit live USB expecting to see a hard drive when I came to install. Sadly when I checked the only hard drive that was showing was /dev/sda which was my USB with the Linux files on it. I also checked gparted and no hard drive other than my USB was showing up there either. Lastly I checked my BIOS and no matter what SATA port I connected the HDD to it wouldn't show up there either. Does anyone have any advice? Some images of my set-up which could help are bellow: Thanks in advance, Nick

    Read the article

  • Blank list of windows services

    - by Joe
    Recently when I open windows services (always as administrator) I get a blank list of services: When I try and click on one of the empty lines I get this "Script Error" message: This happens over and over again, after several times I restarted my computer. I can't pinpoint exactly when this started happening or if I made any specific changes to my computer at that time. Someone told my to try running scf /scannow as administrator, but when I try to do that the scan stops at 34% and I get the message: "Windows Resource Protection could not perform the requested operation." I am running Windows 7 Enterprise 64 bit, and I would really like to avoid reinstalling windows. Does anyone know how to fix this? Edit - Here is another attempt I made and some more information that might help: Following WhoIsRich's suggestion, I tried the command sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. This gave the error message "The arguments passed to sfc are invalid. The offline windows directory specified points to the online system", and then I realized this command is meant to be run after booting from another system. Since I don't have my windows installation disk right now, I used my own system to create a recovery disk, and then restarted my computer and used the recovery disk to boot. I then ran the above command, and I got the following message: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log". I then restarted my computer and let it boot up normally. The problem with windows services persists, and the CBS.log file is a long log file with many entries, and I don't know if there is useful information in it, and if there is, how to find it.

    Read the article

  • Ping Flooding in router log

    - by Freeman
    I've had recently a period of repeated disconnections from my router with connection problems. I checked my router log I found several Ping Flooding entries all originating from the IP 69.171.227.232 which turned out to be one of Facebook IPs! I'm wondering what does that means? Can Facebook chat cause such a condition? My router is DLink dir 600 and the condition that devices were disconnected from router, not router from internet.. Connection is WAN And how to solve this router problem?? My wifi clients were about 3-5 at that time..

    Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >