Daily Archives

Articles indexed Sunday January 9 2011

Page 23/29 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• SQL Server Remote Connections

  - by Barry

  Hi, I am at my wits end with trying to access a remote SQL Server 2008 R2 Express instance. Here are the following that I have tried. 1) I enabled remote connections in the instance properties. 2) I enabled sql server and windows authentication mode and created an account to log in using sql server authentication. 3) I started the SQL Server Browser service 4) I forwarded ports 1433 and 1434 on the router to the IP address of the machine hosting SQL Server. 5) I turned off firewalls on both the Machine running the instance and the router. 6) http://www.yougetsignal.com/tools/open-ports/ I used this to check whether or not both ports were open and it says that they are closed. I have the SQL Server Express instance running and the browser running. I have configured it to allow remote connections yet, it tells me they are both closed. I'm pretty confused at this stage. On the client Machine I am trying to connect using the following format machineip\SQLEXPRESS with SQL Server Management Studio Express. Thanks in advance

  Read the article

• Thunderbird segmentation fault problem

  - by Dariusz Górecki

  Hey all, my thunderbird crashes few seconds after it boots up regardless of in safe mode or normal, here is a strace log: http://pastebin.com/tccfYwcD I've searched google, ubuntu forums, and mozilla bug tracker about this problem, but any of found answers did not helped me :/ I've tried: nscd daemon install solutions posted earlier fresh clean instal of ubuntu 10.10 (32b) and thunderbird 3.1.7 from repos on a VM - problem still exists removed all thunderbrid related dot files and dot dirs, and setup profile from beginning Remove thunderbird and related stuff with apt purge, and install tb from official .deb package None of these steps helps me, tb still crashes with segmentation fault :/ I use gmail IMAP account, I've searched and found few other tips on google, but with no success. I've even tried to remove mails from web gui, that came after first notice of problem, still no luck. I'm not using any network fs, and not sharing this account with anyone, and I do not use filesystem or home encryption either just clean install :/ If You guys need some more info for this let me know. TB: 3.1.7 from repos and official package Ubuntu 32bit 10.10 with medibuntu repos, fully updated

  Read the article

• Backup software for Windows Server 2008 R2 Enterprise with 4 virtual machines (Exchange, SQL, AD, SharePoint)

  - by MadBoy

  What are the options for backup software for: HOST - Windows Server 2008 R2 Enterprise with HyperV VIRTUAL - Windows Server 2008 R2 Enterprise with Exchange 2010 VIRTUAL - Windows Server 2008 R2 Enterprise with SQL Express / SharePoint VIRTUAL - Windows Server 2008 R2 Enterprise with Terminal Services (10 users working on it) VIRTUAL - Windows Server 2008 R2 Enterprise with AD/DNS What I'm looking at is possibility of having an offsite backup thru FTP, maybe copy to usb/esata/lan drives for easy taking backup data outside of company. What I've been looking at: - Symantec Exec Backup 2010 System Recovery has an offsite backup but I would need 5 licenses and it doesn't have granular recovery. - Symantec Exec Backup 2010 seems OK but a bit expensive - Microsoft DPM 2010 requires full SQL Standard and for each machine I would need 4 Enterprise licenses. But does it allow Offsite backup without need for additional license and server outside of company (for doing DPM backup of DPM). What other options? This is 10 people company and so the costs matter but also convenience and security. Offsite backup is requirement.

  Read the article

• Switched from DVI to HDMI, possible audio artifacts?

  - by I take Drukqs

  I'm using an ASUS VH236H monitor and an EVGA GeForce 570 GTX both of which are brand new. My monitor has an audio out port for speakers/headphones so I plugged in my headphones and made a random selection from my library when I noticed two things: There are static-like artifacts during "louder" parts of songs. There's what seems to be a volume cap in place. When I crank the volume past 100% in VLC the decibel level does not truly increase but the amount of static does. The cable is not new; I yanked it off of my PS3 when my DVI cable broke. It has been used a good amount on my HDTV and PS3 so I doubt it's a matter of burn-in. I like the way the setup works with an HDMI cable as opposed to DVI because my headphones barely reach my rig whereas I have plenty of slack when they're plugged into my monitor. Thanks in advance for any support. Note: I'm using a high quality HDMI cable from monoprice, AKG K702 headphones, and VLC media player.

  Read the article

• "Document in ADF" on Canon MX340

  - by Michael Donohue

  I have a Canon MX340 multifunction printer. Recently, it keeps saying "Document in ADF" when I turn on the printer. I've tried clearing this multiple times, but as soon as the feeder wheels stop turning, in an attempt to clear the document feeder, it just pops up the same error again. This is particularly annoying, as it blocks all functions on the device - I cannot print, even though printing has no interaction with the document feeder. I've opened up the feeder device, as much as can be done with fingers alone. There just doesn't seem to be anything in there. I ran a sheet of paper through about six times, just to see if some dust might be getting in the way, and I've blown out the feeder with air. Still nothing. At this point, I don't care too much about the ADF working, I just want to disable whatever sensor is tripping this error message. Any ideas? I found this thread online, where a user has the same problem. But no resolution was reached there.

  Read the article

• Linux: Tool to monitor every process, execute-command, shortly, monitor what's happening at the moment

  - by Bevor

  Hello, due to a freeze problem of my Ubuntu 10.10 (it is not isolatable) I though about logging every executable of the kernel somehow in any file to see what happens last when a freeze occures the next time to not lose valuable information. I found acct but this is obviously not what I'm looking for. Actually it logs just user commands and those things. I need something which logs in a much "deeper" level. The best would be some kind of script which records every interrupt. Does anybody know some tool like that?

  Read the article

• Are there any applications that allow us to ask/answer stack exchange questions from the desktop?

  - by Sklivvz

  Hi, I am looking for an application that acts as a stack exchange client, typically on the desktop. Features: Can ask/edit questions Can answer questions Can comment Supports MathJax Nice to have's: Support for close/open/delete/flag questions User stats page Moderator tools Offline support I am interested in applications that run on any of the following systems: Windows 7 Mac OS X iPhone iPad Ubuntu

  Read the article

• Ubuntu on Oracle VirtualBox: Shared folders

  - by Rosarch

  I looked at this question, but it didn't help. I'm running Windows 7 as a host with Ubuntu 10.10 as a guest with VBox 4.0. I want to have a shared directory between the two. I have installed Guest Additions. I went to the VBox control panel in Windows, added a Shared Folder (sharename Shared_Folder), and chose "Auto Mount". A directory named "sf_Shared_Folder" appeared in /media on Ubuntu, but when I put files in that directory from an OS, I can't see them on the other one. I then tried to create a directory without automounting (sharename collectivefiles), and to run the following command: foo@foo-VirtualBox:~$ sudo mount -t vboxsf collectivefiles FileShare /sbin/mount.vboxsf: mounting failed with the error: No such device What is causing this error? I rebooted both the VM and VBox itself, but I'm still observing this.

  Read the article

• Can I put a laptop Core i7 CPU in a desktop?

  - by Weezy

  One of the most important thing to me for a CPU is a good mix between speed and heat. For example five years ago I bought a Core 2 Duo 6300 (max TDP 65W): I put a big heatsink on the CPU, no fans (I do hate moving parts and noise) and it worked like a charm and very silently for five years (and it still work but five years later I wouldn't mind a faster CPU and a faster memory controller and more memory). I consider a max TDP of 130W unacceptable (like some high-end Core i7 have), for several reasons. So I was wondering: can I build a desktop and put a Core i7 CPU meant to be used in laptop in it? For example I was thinking about the Core i7 740QM (max TDP 45W [!]). Are these compatible with desktop Core i7 motherboards? (for example on NewEgg it says that the "CPU socket type" for the Core i7 740QM is PGA988, I've not too sure about what this is)

  Read the article

• about Linux read/write only permissions

  - by Bimal

  My question looks similar to another thread: Linux directory permissions read write but not delete Here, I want to create a directory where I can give the permissions like: A user can create/upload any files. A user can re-upload and overwrite the files. A user cannot remove the file anymore. I am on CentOS 5.5, basic user only. How can I do that? Or is there any third party software that can be installed to do this? Or, create a new process which will lock the permissions right after a new file is uploaded via ssh?

  Read the article

• Can I keep stream info displayed while in a full screen visualization in VLC?

  - by Daniel

  I am streaming an internet radio station through vlc. When its playing in the player, the title bar shows the song title and artist. When going full screen, it shows the song title/artist for a brief moment in white at the bottom of the screen. But, that quickly disappears. It does not come back up when the song changes. Is there a way to keep the stream info on screen while in full screen visualization mode in vlc?

  Read the article

• Youtube video streaming slow

  - by Newbie

  When I try to stream youtube videos on my ubuntu 11.04, they don't stream smoothly. They buffer well and are choppy. Here's my Config: Laptop: Gateway NV58 Ram : 4 GB Ethernet Controller: Broadcom Corp NetLink BCM5784M Gigabit Ethernet PCIe (rev10) Let me know if you need more details. Thanks Newbie Output of "lspic": 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 04:00.0 Network controller: Intel Corporation WiFi Link 5100

  Read the article

• aptitude update gives 404's for intrepid

  - by dotjoe

  I'm having issues trying to update my packages. I haven't used this server since last September and now I'm getting 404 errors on all the intrepid repos. How do I fix this? Thanks aptitude update Err http://security.ubuntu.com intrepid-security/main Packages 404 Not Found [IP: 91.189.92.166 80] Err http://security.ubuntu.com intrepid-security/restricted Packages 404 Not Found [IP: 91.189.92.166 80] Err http://security.ubuntu.com intrepid-security/main Sources 404 Not Found [IP: 91.189.92.166 80] Err http://security.ubuntu.com intrepid-security/restricted Sources 404 Not Found [IP: 91.189.92.166 80] Err http://security.ubuntu.com intrepid-security/universe Packages 404 Not Found [IP: 91.189.92.166 80] Err http://security.ubuntu.com intrepid-security/universe Sources 404 Not Found [IP: 91.189.92.166 80] Ign http://us.archive.ubuntu.com intrepid-updates/multiverse Packages Ign http://us.archive.ubuntu.com intrepid-updates/multiverse Sources Err http://us.archive.ubuntu.com intrepid/main Packages 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid/restricted Packages 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid/main Sources 404 Not Found [IP: 91.189.88.31 80] Err http://security.ubuntu.com intrepid-security/multiverse Packages 404 Not Found [IP: 91.189.92.166 80] Err http://us.archive.ubuntu.com intrepid/restricted Sources 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid/universe Packages 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid/universe Sources 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid/multiverse Packages 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid/multiverse Sources 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid-updates/main Packages 404 Not Found [IP: 91.189.88.31 80] Err http://security.ubuntu.com intrepid-security/multiverse Sources 404 Not Found [IP: 91.189.92.166 80] Err http://us.archive.ubuntu.com intrepid-updates/restricted Packages 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid-updates/main Sources 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid-updates/restricted Sources 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid-updates/universe Packages 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid-updates/universe Sources 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid-updates/multiverse Packages 404 Not Found [IP: 91.189.88.31 80] Err http://us.archive.ubuntu.com intrepid-updates/multiverse Sources 404 Not Found [IP: 91.189.88.31 80] Reading package lists... sources.list # # deb cdrom:[Ubuntu-Server 8.10 _Intrepid Ibex_ - Release i386 (20081028.1)]/ intrepid main restricted # deb cdrom:[Ubuntu-Server 8.10 _Intrepid Ibex_ - Release i386 (20081028.1)]/ intrepid main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://us.archive.ubuntu.com/ubuntu/ intrepid main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ intrepid main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://us.archive.ubuntu.com/ubuntu/ intrepid-updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ intrepid-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://us.archive.ubuntu.com/ubuntu/ intrepid universe deb-src http://us.archive.ubuntu.com/ubuntu/ intrepid universe deb http://us.archive.ubuntu.com/ubuntu/ intrepid-updates universe deb-src http://us.archive.ubuntu.com/ubuntu/ intrepid-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://us.archive.ubuntu.com/ubuntu/ intrepid multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ intrepid multiverse deb http://us.archive.ubuntu.com/ubuntu/ intrepid-updates multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ intrepid-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb http://us.archive.ubuntu.com/ubuntu/ intrepid-backports main restricted universe multiverse # deb-src http://us.archive.ubuntu.com/ubuntu/ intrepid-backports main restricted universe multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. This software is not part of Ubuntu, but is ## offered by Canonical and the respective vendors as a service to Ubuntu ## users. # deb http://archive.canonical.com/ubuntu intrepid partner # deb-src http://archive.canonical.com/ubuntu intrepid partner deb http://us.archive.ubuntu.com/ubuntu/ intrepid-security main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ intrepid-security main restricted deb http://us.archive.ubuntu.com/ubuntu/ intrepid-security universe deb-src http://us.archive.ubuntu.com/ubuntu/ intrepid-security universe deb http://us.archive.ubuntu.com/ubuntu/ intrepid-security multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ intrepid-security multiverse

  Read the article

• Significant number of non-HTTP requests hitting my site

  - by Mark Westling

  I'm seeing a significant number of non-HTTP requests hitting a site I just launched. They show up in the server (nginx) logs as non-ASCII and get rejected (correctly) with a 400 status. Here are some lines from the log: 95.132.198.189 - - [09/Jan/2011:13:53:30 -0500] "œ$A\x10õœ²É9J" 400 173 "-" "-" 79.100.145.126 - - [09/Jan/2011:13:57:42 -0500] "#§i²¸oYi á¹„\x13VJ—x·—œ\x04N \x1DÔvbÛè½\x10§¬\x1E0œ_^¼+\x09ÜÅ\x08DÌÃiJeT€¿æ]œr\x1EëîyIÐ/ßýúê5Ǹ" 400 173 "-" "-" 79.100.145.126 - - [09/Jan/2011:13:58:33 -0500] "¯Ú%ø=Œ›D@\x12¼\x1C†ÄÀe\x015mˆàd˜Û%pÛÿ" 400 173 "-" "-" What should I make of this? Is this some sort of scripted attack? Or could these be correct requests that have somehow been garbled? They're not affecting the performance of the site and I'm not seeing any other signs of attacks (e.g., no strange POSTs) so at this point I'm more curious than afraid.

  Read the article

• How should I show shared resources during a Shared Resource game in the Galaxy Editor?

  - by Mag Roader

  One of my favorite ways to play the original StarCraft was in a "Team" game. In this game type, multiple players on the same "team" would share control, resources, supply, and even the same starting location. It was like playing as 1 player, only 2 humans were controlling it. It was a lot of fun. I want to do something very similar in StarCraft 2, but I need to create a custom map in the Galaxy Editor to do it. I found the editor can quite easily emulate this behavior. There is a Trigger action "Set Alliance for Player Group" to "...treat each other as Ally With Shared Vision, Control, And Spending." To use this, I create units for only 1 of the players, and then set all players to be allied with each other in this way. All the other players get no units and no resources. This makes it so 1 player is the actual owner of all the units and everyone else is tagging along with full control. This nearly works! The problem is that if I am not the actual owning player, I can't actually see how many minerals/gas/supply the team has. This makes it pretty difficult to build stuff. What would be the best way to display to the other players how many Minerals/Gas/Supply the team has?

  Read the article

• Rotating png images using css in IE

  - by Ernest Shulikovski

  Here is a mockup for something called "Diversity Disc": http://diversity.iest.pl/ It is just three disks that you can rotate and read "results". I am using there just four png images, and rotate using jQuery f.i: $.fn.rleft = function() { return this.animate({ rotate: '-=45deg' }); }; It works not so bad in most new browser. But in all versions of IE things go terribly wrong. There is problem with rotation, and with png: after rotation, there is happening something very ugly with alpha transparency of those images. So my question is, is this possible to make it work in IE 8 and 7 (and, more or less IE 6?). If no I will be forced to order it in Flash. But I would like first to try to do it using just css and javascript (svg?). So what I am doing wrong? Do you have any tips, for using different technology, or js library? Thank you in advance for any answers.

  Read the article

• ActionScript - One Button Limit (Exclusive Touch) For Mobile Devices?

  - by TheDarkIn1978

  two years ago, when i was developing an application for the iPhone, i used the following built-in system method on all of my buttons: [button setExclusiveTouch:YES]; essentially, if you had many buttons on screen, this method insured that the application wouldn't be permitted do crazy things when several button events firing at the same time. problematic: ButtonA and ButtonB are available. each button has a mouse up event which fire a specific reorganization/layout of the UI. if both button's events are fired at the same time, their events will likely conflict, causing a strange new layout, perhaps a runtime error. solution: application buttons cancel any current pending mouse up events when said button enters mouse down. private function mouseDownEventHandler(evt:MouseEvent):void { //if other buttons are currently in a mouse down state ready to fire //a mouse up event, cancel them all here. } of course it's simple to manually handle this if there are only a few buttons on stage, but managing buttons becomes more and more complicated / bug-prone if there are several / many buttons available. is there a convenience method available in AIR specifically for this functionality?

  Read the article

• how does serializable work in java?

  - by Karl Trumstedt

  If I have an instance of a class that I store in a session I need to make it serializable. This class has a static variable, will this be serialized in every instance stored? The static variable is a reference to a cache containing a lot of data in the background. Will all of this data be serialized? If so, it seems preferable to make this variable transient and re-fetch the cache instance each time the instance is restored. Maybe not store the cache instance at all in the class. Will the constructor execute when a class is restored from a serialized state? if not is there any other method I can use to re-instate a transient variable?

  Read the article

• Stuck with jQuery thumbnail gallery behavior

  - by Vitor

  Hi everyone, I'm trying to create a simple thumbnail viewer with jQuery. Here goes the code: $(function(){ $("ul.thumbnails li").click(function(e){ var imgAlt = $(this).find('img').attr("alt"); //Get Alt Tag of Image var imgTitle = $(this).find('a').attr("href"); //Get Main Image URL $("img.featured").attr({ src: imgTitle , alt: imgAlt}); //Switch the main image (URL + alt tag) }); <div class="image-gallery"> <img class="featured" src="big.jpg"> <ul class="thumbnails"> <li id="thumb01"> <a href="big.jpg"><img src="small.jpg"></a> </li> <li id="thumb02"> <a href="big.jpg"><img src="small.jpg"></a> </li> <li id="thumb03"> <a href="big.jpg"><img src="small.jpg"></a> </li> </ul> .thumbnails li { margin: 0; padding: 5px 5px 0 5px; list-style: none; float: left; overflow: hidden; } thumbnails li img { width: 50px; height: 50px; margin: 0; padding: 0; float: left; } If i click the thumbnail, the browser goes straight to the full image instead of just changing the img src with jQuery. But I if i click somewhere inside the <li> it works. I know this must be simple, but I don't know where I'm going wrong. I've tried studying other galleries, like http://www.sohtanaka.com/web-design/examples/image-rotator/ , but couldn't find what I'm missing. I could really use some help from you guys :)

  Read the article

• [C]Dynamic allocation memory of structure, related to GTK

  - by MakeItWork

  Hello, I have following structure: typedef struct { GtkWidget* PoziomaLinijka; GtkWidget* PionowaLinijka; GtkWidget* Label1; GtkWidget* Label2; gint x,y; } StrukturaDrawing; And i need to allocate it on the heap because later I have functions which uses that structure and I don't want to use global variables. So I allocate it like this: StrukturaDrawing* Wsk; Wsk = (StrukturaDrawing*)malloc(sizeof(StrukturaDrawing)); if (!Wsk) { printf("Error\n"); } And it doesn't returning error and also works great with other functions, it works the way I wanted it to work so finally i wanted to free that memory and here is problem because in Debug Mode compilator bitches: First-chance exception at 0x102d12b4 in GTK.exe: 0xC0000005: Access violation reading location 0xfffffffc. Unhandled exception at 0x102d12b4 in GTK.exe: 0xC0000005: Access violation reading location 0xfffffffc. I connect callback to my function, like that: g_signal_connect(G_OBJECT(Okno), "destroy", G_CALLBACK(Wyjscie), Wsk); Function which is suppose to free memory and close program: void Wyjscie(GtkWindow* window, GdkEvent* event, StrukturaDrawing* data) { gtk_main_quit(); free(data); data = NULL; } Any help really appreciated.

  Read the article

• Ternary operators and variable reassignment in PHP

  - by TomcatExodus

  I've perused the questions on ternary operators vs. if/else structures, and while I understand that under normal circumstances there is no performance loss/gain in using ternary operators over if/else structures, I've not seen any mention of this situation. Language specific to PHP (but any language agnostic details are welcome) does the interpreter reassign values in situations like this: $foo = 'bar' $foo = strlen($foo) > 3 ? substr($foo, 0, 3) : $foo; Since this would evaluate to $foo = $foo; is this inefficient, or does the interpreter simply overlook/discard this evaluation? On a side note, what about: !defined('SECURE') ? exit : null;

  Read the article

• What files does JDIC need to run?

  - by Domchi

  I'm trying to call JDIC from my application, but I can't get it to run. What files do I need and where? From what I've been able to gather from their site, I basically need to put jdic.jar in classpath... however there is also a lib folder with jdic.jar with a bit different size, and jdic_native_applet.jar, jdic_stub_unix.jar, jdic_stub_windows.jar and several folders with what I gather are platform specific files. I get this exception when instantiating AssociationService: java.lang.ClassNotFoundException: org.jdesktop.jdic.filetypes.internal.AppAssociationReaderFactory_windows at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:252) at org.jdesktop.jdic.filetypes.AssociationService.<init>(Unknown Source) at QuickTest.main(QuickTest.java:101) I've tried last "official" release and last alpha release. I'm running Java 6 and Win7 64bit. Does JDIC even work under Win7 (or 64bit, although I use 32bit Java)? I see no release after 2006, and no activity in the project after about 2008... while Win7 came in 2009. I know that parts of JDIC, like Desktop, were included in Java 6, however that doesn't seem to be the case with file associations. And if it doesn't, are there any (hopefully cross-platform) alternatives for managing file associations? There are some things for Windows only that I tried, but that requires running native commands with administrator privileges which I don't know how to pull, apart from asking user to run my app as administrator and then use Runtime.exec()... If there are no alternatives to JDIC, I'm interested if anyone has managed to handle file associations well with cross-platform installers?

  Read the article

• How can I automate new system provisioning with scripts under Mac OS X 10.6?

  - by deeviate

  I've been working on this for days but simply cannot find the correct references to make it work. The idea is to have a script that will baseline newly purchased Macs that comes into the company with basic stuffs like set autologin to off, create a new admin user (for remote admins to access for support, set password to unlock screensaver and etc) . Sample list for baseline that admins have to do on each new machine: Click the Login Options button Set Automatic Login: OFF Check: Show the Restart, Sleep, and Shutdown buttons Uncheck: Show input menu in login window Uncheck: Show password hints Uncheck: Use voice over in the login window Check: Show fast user switching menu as Short Name (note: this is only part of a long list to do on each machine) I've managed to find some references to make some parts work. Like autologin can be unset with: defaults write /Library/Preferences/.GlobalPreferences com.apple.userspref.DisableAutoLogin -bool TRUE and I've kinda found ways to muscle in a new user creation (including prompts) with AppleScript and shell commands. But generally its tough finding ways to do somewhat simple things like turn on password to get out of screensaver or to allow fast user switching. References are either too limited or just no where to be seen (e.g. I can unset autologin via cli but the very next setting on the system preference "show restart, sleep and shutdown buttons" is somewhere else and I can't find any command line to make it set) Does anyone have any ideas on a list, document, reference or anything of where each setting on the system resides so that I can be pointed to make it work? or maybe sample scripts for the above example... My thanks for reading thus far—a huge thank you for whoever that has any info on the above.

  Read the article

• MySQL: How to pull information from multiple tables based on information in other tables?

  - by Greg

  Ok, I have 5 tables which I need to pull information from based on one variable. gameinfo id | name | platforminfoid gamerinfo id | name | contact | tag platforminfo id | name | abbreviation rosterinfo id | name | gameinfoid rosters id | gamerinfoid | rosterinfoid The 1 variable would be gamerinfo.id, which would then pull all relevant data from gamerinfo, which would pull all relevant data from rosters, which would pull all relevant data from rosterinfo, which would pull all relevant data from gameinfo, which would then pull all relevant data from platforminfo. Basically it breaks down like this: gamerinfo contains the gamers basic information. rosterinfo contains basic information about the rosters (ie name and the game the roster is aimed towards) rosters contains the actual link from the gamer to the different rosters (gamers can be on multiple rosters) gameinfo contains basic information about the games (ie name and platform) platform info contains information about the different platforms the games are played on (it is possible for a game to be played on multiple platforms) I am pretty new to SQL queries involving JOINs and UNIONs and such, usually I would just break it up into multiple queries but I thought there has to be a better way, so after looking around the net, I couldn't find (or maybe I just couldn't understand what I was looking at) what I was looking for. If anyone can point me in the right direction I would be most grateful.

  Read the article

• How to break closures in JavaScript

  - by Not a Name

  Is there any way to break a closure easily in JavaScript? The closest I have gotten is this: var src = 3; function foo () { return function () { return src; } } function bar (func) { var src = 9; return eval('('+func.toString()+')')(); // Line breaks closure } alert(bar(foo())); Which prints 9, instead of 3 as a closure would dictate. However, this approach seems kind of ugly to me, are there any better ways?

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29  | Next Page >