Daily Archives

Articles indexed Thursday January 13 2011

Page 26/37 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• ESXi Static IP setup with gateway on different subnet

  - by Erik Nelson

  I've got an ESXi server that I'm trying to assign a static IP to. I'm having trouble setting the gateway because (I presume) the gateway is on a different subnet. I've been able to accomplish this task on normal Linux servers by doing the following: route add 172.50.99.254 eth0 route add -net default gw 172.50.99.254 eth0 Now using the GUI config tools for ESXi I've tried setting the following IP: 172.50.5.151 Netmask: 255.255.252.0 Gateway: 172.50.99.254 The gateway does not stick, and when I try to add the gateway manually using esxcfg-route it says it has no route to the gateway IP. How can I get this static IP set correctly? (I don't have any control over the network setup).

  Read the article

• How to skip one folder with 7zip [closed]

  - by SoMoS

  Hello, I have to extract a file from commandline with 7zip (or other free zip application) with the next structure: MAIN_DIR\ ---a ---b ---SUBDIR\ ---c I need the output structure to be the same but skipping the first folder so I end with: ---a ---b ---SUBDIR\ ---c Can this be done with 7zip or other free commandline zip extractor? Thanks in advance.

  Read the article

• Flow of packets in network

  - by user58859

  I can't visualize in my mind the network traffic flow. eg. If there are 15 pc's in a LAN When packet goes from router to local LAN, do it passes all the computers? Does it go to the ethernet card of every computer and those computers accept the packet based on their physical address? To which pc the packet will go first? To the nearest to the router? What happens if that first pc captures that packet(though it is not for it)? What happens when a pc broadcast a message? Do it have to generate 14 packets for all the pc's or only one packet reach to all pc's? If it is one packet and captured by first pc, how other pc's can get that? I can't imagine how this traffic is exactly flows? May be my analogy is completely wrong. Can anybody explain me this?

  Read the article

• Missing advanced network settings for iphone usb/bt tethering

  - by tehfink

  I have the same problem described here: http://discussions.apple.com/message.jspa?messageID=10082848#10082848 Basically, the prefpane windows for my tethered iphone's network interfaces (bluetooth & USB) looks like the image link in the post above, and is missing the normal options for network interfaces: www.macblog.sk/files/pictures/snowleopard_iphone_tethering_connectoin_tcp.png I would like to use the polipo caching proxy for tethered browsing, and am unable to enter proxy settings.

  Read the article

• Does Chrome have a quick find shortcut similar to ' in Firefox?

  - by meder

  I absolutely lived on the ' shortcut in Firefox, which allows you to do a find that applies to text links, and it focuses on them so you can hit Enter and proceed to that link. Chrome only has ctrl-f which focuses on links as well, but you have to ESC out and then hit Enter, which is not as immediate as the Firefox shortcut. Is anyone aware of a Chrome shortcut that replicates this functionality? Or is there some hidden shortcut/key that does this in Chrome which I'm simply unaware of?

  Read the article

• Using Outlook Web Access; MS Office attachments are compressed

  - by ColoBob

  I have MS Office 2007 installed. When am using Outlook Web Access and I receive MS Office 2007 attachments from some colleagues, OWA requires me to save the file, rather than it opening with a double-click. When I "Save Target As..." it gives only the option to save as "Compressed (Zip) File" even though the filename appears as "filename.xlsx" Then, when I open the saved folder, the filename does not appear anywhere. Ideas?

  Read the article

• Konami Code on WordPress

  - by ninjaboi21

  Hey SuperUsers, I would love to get a Konami Code trigger on my WordPress blog, but I really have no idea how to implement it... For those of you who have no idea what Konami Code is, here is a link: http://en.wikipedia.org/wiki/Konami_Code It's a series of steps a user can use on a site and something pops up, user defined. What I would love to, is if someone tries the Konami Code on my website, everything shall fade away and some text shall appear instead. How do you do that? Here's an example of it: zeno.name Thanks in advance!

  Read the article

• suddenly can't connect to router

  - by Khoi

  I was just downloading some stuff in ubuntu and snap, the connection cut and I can't even connect to my router. And the router, it still works fine, my laptop can connect wirelessly to it as usual. But my main computer (which connects to it directly through cable) can't even ping it. Here is my ipconfig: Windows IP Configuration Host Name . . . . . . . . . . . . : vento Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit Ethernet NIC Physical Address. . . . . . . . . : 00-19-DB-4E-6C-56 Ethernet adapter {15B1F740-2F35-4FE4-9FEE-4052AFBAD096}: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Anchorfree HSS Adapter - Packet Sche duler Miniport Physical Address. . . . . . . . . : 00-FF-15-B1-F7-40

  Read the article

• How to skip one folder with 7zip

  - by SoMoS

  Hello, I have to extract a file from commandline with 7zip (or other free zip application) with the next structure: MAIN_DIR\ ---a ---b ---SUBDIR\ ---c I need the output structure to be the same but skipping the first folder so I end with: ---a ---b ---SUBDIR\ ---c Can this be done with 7zip or other free commandline zip extractor? Thanks in advance.

  Read the article

• How to configure mspaint on Windows Server 2008R2/ Win 7 to start up with 1-pixel canvas or auto-crop a pasted image?

  - by Fantomas

  I do a lot of screen print capturing, and I have just figured out how to use AutoHotKey to paste screen prints into MsPaint automatically. How to paste Print Screen on MS Paint automatically when press "PrtSc" button ? However, one small problem I have is that ... if I grabbed a screen with Alt-Prt Scr that is only 50x50 pixels, then there would be extra white margin around it, because MSPaint starts out with a larger canvas by default. How can I make it ALWAYS start with 1x1 instead?

  Read the article

• how to skip one folder with 7zip

  - by SoMoS

  Hello, I have to extract a file from commandline with 7zip (or other free zip application) with the next structure: MAIN_DIR\ ---a ---b ---SUBDIR\ ---c I need the output structure to be the same but skipping the first folder so I end with: ---a ---b ---SUBDIR\ ---c Can this be done with 7zip or other free commandline zip extractor? Thanks in advance.

  Read the article

• is there a way to prevent network manager from storing the password for a wireless network

  - by tolomea

  Our corporate wireless network uses continuously changing passwords with RSA tokens. So every time we need to connect to the wireless we need to enter a new password off the RSA token. For extra fun using the wrong password a couple of times in a row causes the users account to be locked. Network manager automatically stores and reuses the password, with the net result that it is constant getting my account locked. Is there some way to prevent it from storing my password for that network? Or perhaps someway to get the gnome keyring to not store it?

  Read the article

• L'essor des tablettes affecte les ventes de PCs, le marché a été très touché à Noël et cela pourrait continuer en 2011

  L'essor des tablettes affecte les ventes de PCs, le marché a été très touché à Noël et cela pourrait continuer en 2011 Fin 2010, le Père Noël n'a pas eu les mêmes cadeaux dans sa hotte que douze mois auparavant. En effet, en cette période de l'année où les constructeurs enregistrent le plus de ventes, les achats de PCs ont diminué. Deux études menées parallèlement et indépendamment l'une de l'autre sont arrivées aux mêmes conclusions : au quatrième trimestre 2010, le succès phénoménal des iPads et autres tablettes ont fait baisser le chiffre d'affaires mondial des ordinateurs. La hausse des ventes de PCs, comparativement entre décembre 2009 et décembre 2010, ne serait en effet que de 3.7% pour Gartner (et 2.7% pour I...

  Read the article

• What is Android's payment system like?

  - by dootcher

  I've heard that Apple pays the developers in lump sums (I forget how often) for their app downloads. My question is does Google work the same way with Android? If not, how do they operate their payment system? Kind of a side question as well, but how do Apple and Google get you the money from other countries? Do they automatically convert it for you and take a cut for swapping the currency or is that your job?

  Read the article

• How to find out when to increase bit rate? (TCP streaming solution)

  - by Kabumbus

  How to find out when to increase bit rate? (TCP streaming solution) We have a stream with "frames". each "frame" has a "timestamp" . frames have bit rate property which is actually there size. We generate frames with our app and stream them one by one on to our TCP server socket. At the same time server post replies so when after each sent frame we try to read from socket we receive which timestamp is currently on server. if timestamp is lover than previous frame we lover bit rate 20%. Such scheme seems to work giving me one way vbr (lowering) but I wonder how to implement increase? I mean we can always try to increase 5% each frame until some limited desired value but each time we have delay will lose real-time feature of our stream... Generally such scheme is for finding out how much of network stream is currently used by other user apps and give picture of how much server is loaded at the same time so we can stream just right amount of data for all to receive it in real time. So what shall I do to add increase to my scheme? So having current bit rate of A I thought we could add +7% for 3 frames and than one -20% and than if all that 3 frames with +7% came in time we could add 14% to A and repeat circle and it would hopefully not be really noticeable if 2nd frame wold come to us with delay... probably this one is too localised because it is a requirement for me to use TCP.

  Read the article

• Comparison of languages by usage type?

  - by Tom

  Does anyone know of a good place to go find comparisons of programming languages by the intended platform/usage? Basically, what I want to know, is of the more popular languages, which ones are meant for high level application development, low level system development, mobile development, web, etc. If there's a good listing out there already, I'm not finding it so far. Does anyone know of a place that would have this? Thanks.

  Read the article

• Accessing a Web Service: Learning Resource needed

  - by abel

  I have been searching for resources to learn (Java) Web Services. Although I have found a lot of resources and tutorials on JWS, I am confused with the version numbers, the abbreviations and Metro. Plus the last update to Metro was in 2008. Is it a worthwile thing to learn? I wanted to learn how to access Web Services, since an upcoming project is about accessing one. I have some experience with OAuth on Twitter(using code available). Things I know about the project: I have to access a Web Service. Java is the preferred platform to use(Although I know I can use any). Axis can be used to access the Web Service(I have never used Axis) I have a meeting scheduled to learn more, but I sure don't want to look silly since I am no Java expert, have never created or accessed Web Services using Java. My Questions: 1.Can someone point me to a tutorial which will help me learn how to access a already running Web Service (Preferably SOAP(?), not REST. It's XML based) 2. Will you recommend using PHP or Python to do the work of accessing the web service? I am expecting a lot of nay saying, but I hope I get some answers too. I will clarify things if needed.

  Read the article

• Which Continuous Integration framework do you use and why?

  - by Richard Warburton

  There are quite a few different Continuous Integration (CI) frameworks out there and I'm wondering which is the most popular. Which frameworks have you used at firms where you work? Is there any reason one CI framework is more popular than another - perhaps this is to do with the features it offers, things that integrate into it or maybe its just marketing? It seems like continuous integration is used more in the Java and .net worlds than say ruby or python. Why is this?

  Read the article

• Community to discuss project ideas

  - by Auxiliary

  Although I already predict the down votes but the question has stuck in my throat for a while now. I think this has happened to many of us. Sometimes we find a great idea for a project and obviously think this is THE GREATEST idea ever but then one of the following things will happen: The project is a small one, so you might actually give it a try and see how it goes. The project is a big one, even a risk, and you just need a good programmer's community that you could just discuss your idea with them and see what they say and even get some help to make it happen. And there's always the possibility of others stealing your idea which is really bad. So could anyone suggest an online community or place or even method of talking about ideas and the ways of developing them? and do you think it's a good thing to tell others about your idea?

  Read the article

• Is there a virtual printer to output an Open Office doc to multiple images (jpg, png etc)?

  - by fred.bear

  I'm after a virtual printer which takes each page of "printed" output and converts into multiple images (one image for each page)... eg. .jpg, or .png, etc.. I'm specifically looking for something to work with Open-Office Writer, but I assume that such a virtual printer would work across the board for any app which can send its output to a "printer". Is there such a thing in the Ubuntu repository? PS. I want one "normal" picture image per page.. ie Many images are output. ...(like the Snagit virtual printer in Windows)

  Read the article

• Install Ubuntu or Kubuntu on a External USB Drive

  - by rihatum

  Hi All, I have a few external hard drives (SSDs and Platters (SATA), is this possible that I can install Kubuntu 10.10 x64 or Ubuntu 10.10 x64 onto one of these external hard drives? My System supports booting off a usb, it will just give me a learning playground without spoiling my existing operating environment. I know I can install as Virtual machines, but installing U/Kubuntu on a External HDD and booting off it would be easier. Will be grateful for your insights....and steps to do so. Thanks

  Read the article

• unable to access usb device.

  - by Tom

  Hi everyone, I'm reading my boot logs, at /var/log trying to understand why the boot process is taking so long. I found that the system can't access many usb devices, but can't understand why. Is there a way to stop Ubuntu from trying to access them? Here are the lines: /var/log# grep -r "usb_id" . ./boot.log:usb_id[716]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/mouse1' ./boot.log:usb_id[721]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/event7' ./boot.log:usb_id[725]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/event7' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[955]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[956]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/mouse3' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[963]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[955]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[956]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/mouse3' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[963]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' Any help will be greatly appreciated. Thanks in advance.

  Read the article

• Get address using Geocoder in android

  - by user264953

  Hi, I tried to get the address of a particular location by giving static geocordinates. I was not able to fetch the address. Can someone please help. I just need to check whether this function works for me. Here is my snippet. Geocoder geocoder = new Geocoder(AddressSimulator.this, Locale.getDefault()); List<Address> addresses = geocoder.getFromLocation(1.352566007, 103.78921587, 1); System.out.println("Addresses size"+addresses.size()); Address size is obtained as zero. I tried with few other geocordinates also, but address size is always returned as 0. Experts, kindly help me resolve this. Looking forward for your valuable help/suggestions, Best Regards, Rony

  Read the article

• Need to change layout of radio buttons! help needed

  - by James

  I've got 2 radio buttons and i want to put them next to each other. Right now theyre like Radio button 1 Radio button 2 i want to make it Radio button 1 Radio button 2 This is my code for the radio buttons, any help? <RadioGroup android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="vertical"> <RadioButton android:id="@+id/radio_male" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Male" android:layout_below="@id/gender"/> <RadioButton android:id="@+id/radio_female" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Female" /> </RadioGroup>

  Read the article

• Detecting const-ness of nested type

  - by Channel72

  Normally, if I need to detect whether a type is const I just use boost::is_const. However, I ran into trouble when trying to detect the const-ness of a nested type. Consider the following traits template, which is specialized for const types: template <class T> struct traits { typedef T& reference; }; template <class T> struct traits<const T> { typedef T const& reference; }; The problem is that boost::is_const doesn't seem to detect that traits<const T>::reference is a const type. For example: std::cout << std::boolalpha; std::cout << boost::is_const<traits<int>::reference>::value << " "; std::cout << boost::is_const<traits<const int>::reference>::value << std::endl; This outputs: false false Why doesn't it output false true?

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >