Daily Archives

Articles indexed Thursday January 13 2011

Page 28/37 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • USB Drive that simultaneously connects to more than one computer

    - by user2499
    Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

    Read the article

  • Best Configuration For Youtube HD 720p

    - by Eray Alakese
    Hello, I'm recording a screencast with CamStudio . My computer's screen resolution is 1280*800 , so video's resolution is 1280*800, too. I'm using Microsoft Video 1 codec when recording. I was record 9 minutes video and this video's size is 214 MB . I will upload this video to Youtube. I'm coding a web site at the video, because of this, video must be quality (720p) . I want to reduce file's size, before upload . I'm using Total Video Converter . But when i convert to FLV , video's size increase to 250MB :) I don't know, how can i configure this setting and which file type should i choose.

    Read the article

  • What are the implications of Nvidia's "the way it's meant to be played"?

    - by Mike Pateras
    I have an AMD Radeon 5850 (about to be 2), and today I read that Rift is a member of Nvidia's "the way it's meant to be played" program. It was suggested that as such the developers would not be speaking with or working directly with AMD for optimization, and that it would be unlikely that Crossfire support would be added until the game's release. Are any of these implications likely? Or does it just mean that Nvidia is working closely with the developers for optimization and marketing support?

    Read the article

  • Sync content from my iPad to iTunes? i.e. "reverse" syncing

    - by Jim
    I recently had to reset my PC back to factory settings which lost my entire iTunes library. I still have my music and other files on my iPad and want to sync it back to the PC. Upon syncing it only gives me two options. "Erase and Sync" which replaces the contents of my iPad with the blank iTunes library, or, "Transfer Purchases" which reads like it will only transfer the purchases from iPad to iTunes. I would like to avoid re-burning my entire CD library to iTunes all over again. Is there a way for me to sync the iPad to the iTunes library (aka the computer)?

    Read the article

  • Auto-connect Bluetooth headphones in Windows 7 64bit

    - by CptSkippy
    I have a pair of bluetooth headphones that I've successfully paired with my Windows 7 64bit machine and audio plays through them without a hitch. On the Device Stage under the properties of the headphones in troubleshooting it shows "last connected" as "currently connected" even if I power cycle the headphones or after a reboot of my computer. So the Windows bluetooth stack has no trouble finding them. The problem I have is that whenever the headphones reconnect to my pc they show up as disconnected in the Sound Settings and no sound is routed to them until I manually connect them. I have to go into Sound Settings, then from the Playback tab right click on the headphones and choose the Connect option. Is there a way to make the Sound Settings connect automatically whenever the headphones are available to Windows?

    Read the article

  • Why doesn't the Ubuntu Installer see all of my hard drives

    - by atodd
    I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed. I've tried everything I know. I'm not sure if its a BIOS setting or something else I've missed.

    Read the article

  • How to extract subfolder from 7zip archive?

    - by SoMoS
    I have to extract a file from commandline with 7zip (or other free zip application) with the next structure: MAIN_DIR\ ---a ---b ---SUBDIR\ ---c I need the output structure to be the same but skipping the first folder so I end with: ---a ---b ---SUBDIR\ ---c Can this be done with 7zip or other free commandline zip extractor? Thanks in advance.

    Read the article

  • How to extract subfolder from 7zip archive?

    - by SoMoS
    I have to extract a file from commandline with 7zip (or other free zip application) with the next structure: MAIN_DIR\ ---a ---b ---SUBDIR\ ---c I need the output structure to be the same but skipping the first folder so I end with: ---a ---b ---SUBDIR\ ---c Can this be done with 7zip or other free commandline zip extractor? Thanks in advance.

    Read the article

  • Best Configuration For Youtube HD 720p

    - by Eray Alakese
    Hello, I'm recording a screencast with CamStudio (http://camstudio.org/) . My computer's screen resolution is 1280*800 , so video's resolution is 1280*800, too. I'm using Microsoft Video 1 codec when recording. I was record 9 minutes video and this video's size is 214 MB . I will upload this video to Youtube. I'm coding a web site at the video, because of this, video must be quality (720p) . I want to reduce file's size, before upload . I'm using Total Video Converter (http://www.effectmatrix.com/total-video-converter/) . But when i convert to FLV , video's size increase to 250MB :) I don't know, how can i configure this setting and which file type should i choose. (screenshot here : http://i.imgur.com/Se0EP.jpg )

    Read the article

  • Does the Dell Inspiron 1501 handle more than 4 Gb of RAM?

    - by zillion
    After the following comment on my last question, I'm thinking about upgrading my RAM: I got a 160 GB Scorpio Blue a couple months ago for my 1501. It's nice. That + 2 GB Crucial RAM have rather revived my notebook (meaning a very nice speed and storage boost). I was outgrowing it... – Nathaniel What would be the best choice to add more RAM? I've already got 2 GB, but I'm not sure what their speed is. What are the size, type and speed limitations for RAM on my particular laptop?

    Read the article

  • Sortie d'une nouvelle version stable de Chrome et de Chrome OS, et premier "Elite Award" pour le fix d'un bogue dans Chromium

    Sortie d'une nouvelle version stable de Chrome et de Chrome OS, et remise du premier "Elite Award" pour la correction d'un bogue dans Chromium Google vient de sortir très discrètement deux nouvelles versions de Chrome (8.0.552.237) et de Chrome OS (8.0.552.334), qui ne sont pas majeures mais néanmoins importantes. En effet, elles permettent de corriger plusieurs petites brèches, mais surtout un bogue "Elite" (critique), qui avait été découvert et signalé par Sergey Glazunov. Ce dernier devient de ce fait la première personne a être récompensée par la "Elite Security Reward" de Mountain View, qui se monte à 3.133,70 dollars. C'est la plus haute récompense à laquelle peut prétendre un indi...

    Read the article

  • Webcast: Best Practices for Speeding Virtual Infrastructure Deployment with Oracle VM

    - by Honglin Su
    We announced Oracle VM Blade Cluster Reference Configuration last month, see the blog. The new Oracle VM blade cluster reference configuration can help reduce the time to deploy virtual infrastructure by up to 98 percent when compared to multi-vendor configurations. Customers and partners have shown lots of interests. Join Oracle's experts to learn the best practices for speeding virtual infrastructure deployment with Oracle VM, register the webcast (1/25/2011) here.   Virtualization has already been widely accepted as a means to increase IT flexibility and help IT services align better with changing business needs. The flexibility of a virtualized IT infrastructure enables new applications to be rapidly deployed, capacity to be easily scaled, and IT resources to be quickly redirected. The net result is that IT can bring greater value to the business, making virtualization an obvious win from a business perspective. However, building a virtualized infrastructure typically requires assembling and integrating multiple components (e.g. servers, storage, network, virtualization, and operating systems). This infrastructure must be deployed and tested before applications can even be installed. It can take weeks or months to plan, architect, configure, troubleshoot, and deploy a virtualized infrastructure. The process is not only time-consuming, but also error-prone, making it hard to achieve a timely and profitable return on investment.  Oracle is the only vendor that can offer a fully integrated virtualization infrastructure with all of the necessary hardware and software components. The Oracle VM blade cluster reference configuration is a single-vendor solution that addresses every layer of the virtualization stack with Oracle hardware and software components, see the figure below. It enables quick and easy deployment of the virtualized infrastructure using components that have been tested together and are all supported together by Oracle. To learn more about Oracle's virtualization offerings, visit http://oracle.com/virtualization.

    Read the article

  • What legal considerations do I need to have when programming?

    - by JustJohn
    Recently I worked with a group to create a logging system for tutoring labs to track Tutor hours, and usage of the labs. We had to change the design a fair amount to be in compliance with FERPA. My question stems from the curiosity that in my course of study there has never been a real mention of how people in this field have to deal with complying with the law in their work. So I would like to know how much programmers have to consider the law in the work they do.

    Read the article

  • Correlating /var/log/* timestamps

    - by intuited
    /var/log/messages, /var/log/syslog, and some other log files use a timestamp which contains an absolute time, like Jan 13 14:13:10. /var/log/Xorg.0.log and /var/log/dmesg, as well as the output of $ dmesg, use a format that looks like [50595.991610] malkovich: malkovich malkovich malkovich malkovich I'm guessing/gathering that the numbers represent seconds and microseconds since startup. However, my attempt to correlate these two sets of timestamps (using the output from uptime) gave a discrepancy of about 5000 seconds. This is roughly the amount of time my computer was suspended for. Is there a convenient way to map the numeric timestamps used by dmesg and Xorg into absolute timestamps?

    Read the article

  • My Flex 3 Website Doesn't Have Any Keywords Listed in Google's Webmaster Tools

    - by Laxmidi
    Hi, I've got a Flex 3 website. When I in Google's webmaster tools - Your site on the web - Keywords, none are listed. Does anyone have an all-Flex site that has keywords listed for it the above? The sites been up for about a month. It's been indexed by Google. I have keyword metatags in the site, which from what I've read Google ignores. Where does google come up with the keywords for your site? Any suggestions on what I need to do? Thank you. -Laxmidi www.brainpinata.com

    Read the article

  • MySQL left outer join is slow

    - by Ryan Doherty
    Hi, hoping to get some help with this query, I've worked at it for a while now and can't get it any faster: SELECT date, count(id) as 'visits' FROM dates LEFT OUTER JOIN visits ON (dates.date = DATE(visits.start) and account_id = 40 ) WHERE date >= '2010-12-13' AND date <= '2011-1-13' GROUP BY date ORDER BY date ASC That query takes about 8 seconds to run. I've added indexes on dates.date, visits.start, visits.account_id and visits.start+visits.account_id and can't get it to run any faster. Table structure (only showing relevant columns in visit table): create table visits ( `id` int(11) NOT NULL AUTO_INCREMENT, `account_id` int(11) NOT NULL, `start` DATETIME NOT NULL, `end` DATETIME NULL, PRIMARY KEY (`id`) ) ENGINE=MyISAM DEFAULT CHARSET=utf8; CREATE TABLE `dates` ( `date` date NOT NULL, PRIMARY KEY (`date`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1; dates table contains all days from 2010-1-1 to 2020-1-1 (~3k rows). visits table contains about 400k rows dating from 2010-6-1 to yesterday. I'm using the date table so the join will return 0 visits for days there were no visits. Results I want for reference: +------------+--------+ | date | visits | +------------+--------+ | 2010-12-13 | 301 | | 2010-12-14 | 356 | | 2010-12-15 | 423 | | 2010-12-16 | 332 | | 2010-12-17 | 346 | | 2010-12-18 | 226 | | 2010-12-19 | 213 | | 2010-12-20 | 311 | | 2010-12-21 | 273 | | 2010-12-22 | 286 | | 2010-12-23 | 241 | | 2010-12-24 | 149 | | 2010-12-25 | 102 | | 2010-12-26 | 174 | | 2010-12-27 | 258 | | 2010-12-28 | 348 | | 2010-12-29 | 392 | | 2010-12-30 | 395 | | 2010-12-31 | 278 | | 2011-01-01 | 241 | | 2011-01-02 | 295 | | 2011-01-03 | 369 | | 2011-01-04 | 438 | | 2011-01-05 | 393 | | 2011-01-06 | 368 | | 2011-01-07 | 435 | | 2011-01-08 | 313 | | 2011-01-09 | 250 | | 2011-01-10 | 345 | | 2011-01-11 | 387 | | 2011-01-12 | 0 | | 2011-01-13 | 0 | +------------+--------+ Thanks in advance for any help!

    Read the article

  • How to map a set of text as a whole to a node?

    - by JIpeng Tan
    Suppose I have a plain text file with the following data: DataSetOne <br /> content <br /> content <br /> content <br /> DataSetTwo <br /> content <br /> content <br /> content <br /> content <br /> ...and so on... What I want to to is: count how many contents in each data set. For example the result should be <DataSetOne, 3>, <DataSetTwo, 4> I am a beginer to hadoop, I wonder if there is a way to map a chunk of data as a whole to a node. for example, set all DataSetOne to node 1 and all DataSetTwo to node 2. Does anyone can give me an idea how to archive this?

    Read the article

  • Placing Select Folders Under Version Control

    - by Jonah
    Hi, I have an SVN repository on my hosted server (linux), and I need to do local work on them on my windows machine (tortoise svn installed). To simplify my question, the dir structure looks like: root |--------sub1 |--------sub2 |--------sub3 ... |--------subN with additional subfolders under each subX. Say I only want certain sub-subfolders of "sub1" and "sub3" under version control. But on windows, when I commit a change with tortoisesvn, I still want to be able to right click the root folder, hit commit, and have any changes that exist anywhere under root in any selected folders to be committed. The problem is, I think using ignore would be very cumbersome, since there would be so many folders to ignore, at different levels of structure. So basically, I want to put the whole thing under version control, and then tell svn "ok, now ignore everything except X and Y". What is the easiest way to accomplish this? Thanks, Jonah

    Read the article

  • How are Cassandra's 0.7 Secondary Indexes stored?

    - by user574793
    We have been using Cassandra 0.6 and now have Column Families with millions of keys. We are interested in using the new Secondary Index feature available in the 0.7 but couldn't find any documentation on how the new index is stored. Is there any disk-space limitation or is the index stored similar to keys in that it's spread over multiple nodes? I've tried combing through the Cassandra site for an answer but to no avail.

    Read the article

  • how can i tell ruby to use the html string

    - by Matt
    i have this "<img src='#{picture.url(:tiny)}'>" which prints to this &lt;img src='/system/pictures/2/tiny/Womacdsf.jpg?1294942797'&gt;, &lt;img src='/system/pictures/3/tiny/Womacdsf_3017.jpg?1294942797'&gt;, &lt;img src='/system/pictures/4/tiny/Womacdsf_8012.jpg?1294942797'&gt;, … (8) as you can see this is doing the &lt; and &gt; instead of the < and how can i tell ruby this is not what i want

    Read the article

  • Using reflection to find all linq2sql tables and ensure they match the database

    - by Jake Stevenson
    I'm trying to use reflection to automatically test that all my linq2sql entities match the test database. I thought I'd do this by getting all the classes that inherit from DataContext from my assembly: var contexttypes = Assembly.GetAssembly(typeof (BaseRepository<,>)).GetTypes().Where( t => t.IsSubclassOf(typeof(DataContext))); foreach (var contexttype in contexttypes) { var context = Activator.CreateInstance(contexttype); var tableProperties = type.GetProperties().Where(t=> t.PropertyType.Name == typeof(ITable<>).Name); foreach (var propertyInfo in tableProperties) { var table = (propertyInfo.GetValue(context, null)); } } So far so good, this loops through each ITable< in each datacontext in the project. If I debug the code, "table" is properly instantiated, and if I expand the results view in the debugger I can see actual data. BUT, I can't figure out how to get my code to actually query that table. I'd really like to just be able to do table.FirstOrDefault() to get the top row out of each table and make sure the SQL fetch doesn't fail. But I cant cast that table to be anything I can query. Any suggestions on how I can make this queryable? Just the ability to call .Count() would be enough for me to ensure the entities don't have anything that doesn't match the table columns.

    Read the article

  • Setting up isolated COM for multiple projects.

    - by Praneeth
    My solution consists of multiple projects all of which out type class library except one whose output type is windows application. The application references all the other projects. I also have a COM component which is referenced by some of the projects and the application also. I can setup the regfree COM by changing the Isolated property of the referenced COM component in visual studio to TRUE. The solution builds successfully and I can see the manifest file generated for that particular assembly or application. Now, my question is that do I need to do this for all the projects which reference the COM component? If yes, then I know that i cannot set the Isolated property to TRUE on more than one project(gives a build error) so how do I workaround this? I am relatively new to .net and don't know much regfree COM(i assume what i am doing IS regfree COM?). Any help I can get on this issue is greatly appreciated. Thanks. I am currently using VS 2008.

    Read the article

  • Light weight C++ SAX XML parser

    - by John Bartholomew
    I know of at least three light weight C++ XML parsers: RapidXML, TinyXML and PugiXML. However, all three use a DOM based interface (ie, they build their own in-memory representation of the XML document and then provide an interface to traverse and manipulate it). For most situations that I have to deal with, I much prefer the SAX interface (where the parser just spits out a stream of events like start-of-tag, and the application code is responsible for doing whatever it wants based on those events). Can anyone recommend a light weight C++ XML library with a SAX interface? Edit: I should also note the Microsoft XmlLite library, which does use a SAX interface. Unfortunately, it's ruled out for me at the moment since as far as I know it's closed source and Windows only (please correct me if I'm wrong on this).

    Read the article

  • Recording object method calls to generate automated test.

    - by Constantin
    I have an object with large interface and I would like to record all its method calls done during a user session. Ideally this sequence of calls would be available as source code: myobj.MethodA(42); myobj.MethodB("spam", false); ... I would then convert this code to a test case to have a kind of automated smoke/load test. WCF Load Test can do this for WCF services and CodedUI test recorder can do this for UIs. What are my options for a POCO class? I am in position to edit application code and replace the object in question with some recording/forwarding proxy.

    Read the article

  • 'array bound is not an integer constant' when defining size of array in class, using an element of a const array

    - by user574733
    #ifndef QWERT_H #define QWERT_H const int x [] = {1, 2,}; const int z = 3; #endif #include <iostream> #include "qwert.h" class Class { int y [x[0]]; //error:array bound is not an integer constant int g [z]; //no problem }; int main () { int y [x[0]]; //no problem Class a_class; } I can't figure out why this doesn't work. Other people with this problem seem to be trying to dynamically allocate arrays. Any help is much appreciated.

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >