Monthly Archives

Articles indexed in April 2012

Page 26/252 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • Xinet tftp timeout

    - by Matt Mootz
    I trying to set up a PXE boot server. Everything is working but the TFTP client is timing out. TFTP connection timeout I am using this to setup the TFTP server. http://www.davidsudjiman.info/2006/03/27/installing-and-setting-tftpd-in-ubuntu/ /etc/xinet.d/tftp service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = /tftpboot disable = no } ps ax|grep tftp doesn't return it running. any idea's what could be wrong?

    Read the article

  • Why am I asked for default's keyring at startup?

    - by Nicoco
    I'm prompted for default's keyring at every boot since 11.10 upgrade, even though I don't see any application I have needing at startup (I have no wifi, and disabled gwibber-service) How can I know which application is requesting it ? How can I disable it ? I can't even move any window until I enter the password, and sometimes entering the password even crashes X (bug reported here : https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-evdev/+bug/882955)

    Read the article

  • Why Ubuntu One pretends to sychronize files, but it doesn't?

    - by Tom Brito
    I have my Ubuntu One account configured in both Ubuntu 11.10 and iOS (ipod-touch). The photos from the iOS were successfully uploaded, but in Ubuntu One, although it shows the "syncing" and "synchronized" marks over the icons, the files are not showing in the website (one.ubuntu.com). In short: My files are not showing in the Ubuntu One website, although the icons have the "uploaded" mark. Any idea what can be wrong here? obs1: Also, not sure if it's related, the icon-marks will show only when I open the Ubuntu One Control Panel. It shows the message "file was uploaded", but there's nothing online. obs2: The folder I'm trying to synchronize is 30mb size. And my connection is 8mbps.

    Read the article

  • SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

    - by digby280
    I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • HTC Trophy not detected

    - by Earl Larson
    When I plug in the device via USB chord, nothing happens and the device is not shown on the desktop. However, when I type "lsusb" into a terminal this is the output: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 04f2:b249 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 045e:04ec Microsoft Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I'm assuming Microsoft Corp. is the device but why isn't Ubuntu displaying it on the desktop?

    Read the article

  • How to change mimetype image for PSD file (Photoshop)?

    - by ubuntico
    Following this link https://help.ubuntu.com/community/AddingMimeTypes, I first typed a command to discover the mimetype for psd extension ~$ grep 'psd' /etc/mime.types image/x-photoshop psd Then I took Photoshop CS5 SVG image from Wikipedia and renamed it to image-x-photoshop.svg. Then I copied the file to the folder /usr/share/icons/gnome/scalable via command sudo cp image-x-photoshop.svg /usr/share/icons/gnome/scalable/image-x-photoshop.svg Loogged out, logged in, but the icon for the .psd files is still unchanged. Does anyone know what I am doing wrong? I use Ubuntu 10.10. Thanks in advance

    Read the article

  • Domain transfer and New Hosting Management

    - by Anubhav Saini
    I wanted to migrate from my older registrar to GoDaddy. Main reason because current registrar/hosting provider doesn't support .NET. My old registrar gave me control over the domain and hosting account. So, basically I have everything I would need. ( I know theory only ) I applied for Transfer of domain, bought a hosting package from GoDaddy and uploaded new web site. So, I am waiting for domain transfer and it tells me that I have to wait for 5-7 days for approval. Okay. But today, my old registrar told/taunted me that I really didn't need to apply for transfer. What could possibly I have done differently? My domain expires on this 15th. Now I don't know much about how all of this really works, but I am guessing he meant, "you should have waited for 15 days and let it expire after which you should buy the domain as it is expired". Is it really so(I doubt) or there are some other ways I could have got same result but without transferring domain? (like, changing DNS entries) I have read like all of the documentation available on namecheap/GoDaddy/Whois about domain transfers. But maybe because I am new to this it is all confusing to me. I would also like to know what to do with DNS settings after transfer succeeds. I want to kill the old website. So, what nameserver settings I need to change, new one or old one or both? I have old host+old domain registrar + old working site on one hand, on the other hand, new site + pending domain transfer + new DNS settings.

    Read the article

  • Is sqlite3 faster than MySQL on shared hosting?

    - by Osvaldo
    Can sqlite3 be faster than MySQL on shared hosting and small to average websites (less than 500 visitors a day). I have an account in a popular shared hosting provider and I've noticed that it has become quite slow redering pages. My doubt is that this may happen because the MySQL server is overloaded. Some CMS'es work fine with SQLlite too, so I was wandering if I should use SQLite for the new sites instead of MySQL.

    Read the article

  • How do I move the camera sideways in Libgdx?

    - by Bubblewrap
    I want to move the camera sideways (strafe). I had the following in mind, but it doesn't look like there are standard methods to achieve this in Libgdx. If I want to move the camera sideways by x, I think I need to do the following: Create a Matrix4 mat Determine the orthogonal vector v between camera.direction and camera.up Translate mat by v*x Multiply camera.position by mat Will this approach do what I think it does, and is it a good way to do it? And how can I do this in libgdx? I get "stuck" at step 2, as I have not found any standard method in Libgdx to calculate an orthogonal vector. EDIT: I think I can use camera.direction.crs(camera.up) to find v. I'll try this approach tonight and see if it works. EDIT2: I got it working and didn't need the matrix after all: Vector3 right = camera.direction.cpy().crs(camera.up).nor(); camera.position.add(right.mul(x));

    Read the article

  • How to render a retro-like pixel graphics from 3d models?

    - by momijigari
    I was wondering if there's a possibility to render a retro-pixel-like graphics from 3d model in real time? I'm talking about the Starfarer-like graphics. I know it's hand drawn, and it's 2d. But if I need a 3d objects with the same aesthetics? I'm currently working with Flash. But I don't need any ready-solutions, I just want to understand the principle from any other platform if there is one. So if anybody met anything like this I would appreciate your help. (If it's not possible to do in real time, I could at least pre-render a sequence of sprites. It would be much better than creating hundreds of hand-drawn ones)

    Read the article

  • How do you maintain content size vs. content quality in an application?

    - by PeterK
    I am developing my first Cocos2d iPhone/iPad game that includes quite a few sprites, I would need approximately 80 different. As this is for both normal and HD displays I have 2x of each sprite. I am using TexturePacker to optimize the thing. I would like to ask if there are any rules-of-thumb, tricks, ideas etc. to adjust to in regards to size of content, quality and how you maintain high-quality HD-based graphics due to its size vs. the device memory sizes? Also, is it a good idea to only have one copy of the sprites and scale it using code?

    Read the article

  • How to make a ball fall faster on a ramp? Unity3D/C#

    - by Timothy Williams
    So, I'm making a ball game. Where you pick up the ball, drop it on a ramp, and it flies off in to blocks. The only problem right now is it falls at a normal speed, then lightly falls off, not nearly fast enough to get over the wall and hit the blocks. Is there any way to make the ball go faster down the ramp? Maybe even make it go faster depending on what height you dropped it from (e.g. if you hold it way above the ramp, and drop it, it will drop faster than if you dropped it right above the ramp.) Thanks.

    Read the article

  • Multiple Kickstarter campaigns. Good? Bad? Ugly?

    - by BerickCook
    I've been toying with the idea of doing a Kickstarter for my game to help fund some good artists to replace the placeholder graphics I currently have. Just a small goal of $2k or so. Regardless of whether the campaign is successful this time, would it be considered a faux pas to do another, larger kickstarter once the game is looking better? Would the rewards need to be the same, or could I offer better rewards at lower donation levels for the first one as an "early adopter" bonus?

    Read the article

  • What is the proper way to use string::find to look for a word? [migrated]

    - by RubyKing
    How would I look through a string for a word rather then each character in that word. I have my code here and it always seems to find everything that is .obj even if its o or b or j or "." I checked the docuementation here but was unable to find an answer. Here is my code: string &str = *it; if(it->find(".obj")) { cout << "Found .Obj" << endl; } I also tried to use string::compare but that failed.

    Read the article

  • OpenGL 3.x Assimp trouble implementing phong shading (normals?)

    - by Defcronyke
    I'm having trouble getting phong shading to look right. I'm pretty sure there's something wrong with either my OpenGL calls, or the way I'm loading my normals, but I guess it could be something else since 3D graphics and Assimp are both still very new to me. When trying to load .obj/.mtl files, the problems I'm seeing are: The models seem to be lit too intensely (less phong-style and more completely washed out, too bright). Faces that are lit seem to be lit equally all over (with the exception of a specular highlight showing only when the light source position is moved to be practically right on top of the model) Because of problems 1 and 2, spheres look very wrong: picture of sphere And things with larger faces look (less-noticeably) wrong too: picture of cube I could be wrong, but to me this doesn't look like proper phong shading. Here's the code that I think might be relevant (I can post more if necessary): file: assimpRenderer.cpp #include "assimpRenderer.hpp" namespace def { assimpRenderer::assimpRenderer(std::string modelFilename, float modelScale) { initSFML(); initOpenGL(); if (assImport(modelFilename)) // if modelFile loaded successfully { initScene(); mainLoop(modelScale); shutdownScene(); } shutdownOpenGL(); shutdownSFML(); } assimpRenderer::~assimpRenderer() { } void assimpRenderer::initSFML() { windowWidth = 800; windowHeight = 600; settings.majorVersion = 3; settings.minorVersion = 3; app = NULL; shader = NULL; app = new sf::Window(sf::VideoMode(windowWidth,windowHeight,32), "OpenGL 3.x Window", sf::Style::Default, settings); app->setFramerateLimit(240); app->setActive(); return; } void assimpRenderer::shutdownSFML() { delete app; return; } void assimpRenderer::initOpenGL() { GLenum err = glewInit(); if (GLEW_OK != err) { /* Problem: glewInit failed, something is seriously wrong. */ std::cerr << "Error: " << glewGetErrorString(err) << std::endl; } // check the OpenGL context version that's currently in use int glVersion[2] = {-1, -1}; glGetIntegerv(GL_MAJOR_VERSION, &glVersion[0]); // get the OpenGL Major version glGetIntegerv(GL_MINOR_VERSION, &glVersion[1]); // get the OpenGL Minor version std::cout << "Using OpenGL Version: " << glVersion[0] << "." << glVersion[1] << std::endl; return; } void assimpRenderer::shutdownOpenGL() { return; } void assimpRenderer::initScene() { // allocate heap space for VAOs, VBOs, and IBOs vaoID = new GLuint[scene->mNumMeshes]; vboID = new GLuint[scene->mNumMeshes*2]; iboID = new GLuint[scene->mNumMeshes]; glClearColor(0.4f, 0.6f, 0.9f, 0.0f); glEnable(GL_DEPTH_TEST); glDepthFunc(GL_LEQUAL); glEnable(GL_CULL_FACE); shader = new Shader("shader.vert", "shader.frag"); projectionMatrix = glm::perspective(60.0f, (float)windowWidth / (float)windowHeight, 0.1f, 100.0f); rot = 0.0f; rotSpeed = 50.0f; faceIndex = 0; colorArrayA = NULL; colorArrayD = NULL; colorArrayS = NULL; normalArray = NULL; genVAOs(); return; } void assimpRenderer::shutdownScene() { delete [] iboID; delete [] vboID; delete [] vaoID; delete shader; } void assimpRenderer::renderScene(float modelScale) { sf::Time elapsedTime = clock.getElapsedTime(); clock.restart(); if (rot > 360.0f) rot = 0.0f; rot += rotSpeed * elapsedTime.asSeconds(); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT | GL_STENCIL_BUFFER_BIT); viewMatrix = glm::translate(glm::mat4(1.0f), glm::vec3(0.0f, -3.0f, -10.0f)); // move back a bit modelMatrix = glm::scale(glm::mat4(1.0f), glm::vec3(modelScale)); // scale model modelMatrix = glm::rotate(modelMatrix, rot, glm::vec3(0, 1, 0)); //modelMatrix = glm::rotate(modelMatrix, 25.0f, glm::vec3(0, 1, 0)); glm::vec3 lightPosition( 0.0f, -100.0f, 0.0f ); float lightPositionArray[3]; lightPositionArray[0] = lightPosition[0]; lightPositionArray[1] = lightPosition[1]; lightPositionArray[2] = lightPosition[2]; shader->bind(); int projectionMatrixLocation = glGetUniformLocation(shader->id(), "projectionMatrix"); int viewMatrixLocation = glGetUniformLocation(shader->id(), "viewMatrix"); int modelMatrixLocation = glGetUniformLocation(shader->id(), "modelMatrix"); int ambientLocation = glGetUniformLocation(shader->id(), "ambientColor"); int diffuseLocation = glGetUniformLocation(shader->id(), "diffuseColor"); int specularLocation = glGetUniformLocation(shader->id(), "specularColor"); int lightPositionLocation = glGetUniformLocation(shader->id(), "lightPosition"); int normalMatrixLocation = glGetUniformLocation(shader->id(), "normalMatrix"); glUniformMatrix4fv(projectionMatrixLocation, 1, GL_FALSE, &projectionMatrix[0][0]); glUniformMatrix4fv(viewMatrixLocation, 1, GL_FALSE, &viewMatrix[0][0]); glUniformMatrix4fv(modelMatrixLocation, 1, GL_FALSE, &modelMatrix[0][0]); glUniform3fv(lightPositionLocation, 1, lightPositionArray); for (unsigned int i = 0; i < scene->mNumMeshes; i++) { colorArrayA = new float[3]; colorArrayD = new float[3]; colorArrayS = new float[3]; material = scene->mMaterials[scene->mNumMaterials-1]; normalArray = new float[scene->mMeshes[i]->mNumVertices * 3]; unsigned int normalIndex = 0; for (unsigned int j = 0; j < scene->mMeshes[i]->mNumVertices * 3; j+=3, normalIndex++) { normalArray[j] = scene->mMeshes[i]->mNormals[normalIndex].x; // x normalArray[j+1] = scene->mMeshes[i]->mNormals[normalIndex].y; // y normalArray[j+2] = scene->mMeshes[i]->mNormals[normalIndex].z; // z } normalIndex = 0; glUniformMatrix3fv(normalMatrixLocation, 1, GL_FALSE, normalArray); aiColor3D ambient(0.0f, 0.0f, 0.0f); material->Get(AI_MATKEY_COLOR_AMBIENT, ambient); aiColor3D diffuse(0.0f, 0.0f, 0.0f); material->Get(AI_MATKEY_COLOR_DIFFUSE, diffuse); aiColor3D specular(0.0f, 0.0f, 0.0f); material->Get(AI_MATKEY_COLOR_SPECULAR, specular); colorArrayA[0] = ambient.r; colorArrayA[1] = ambient.g; colorArrayA[2] = ambient.b; colorArrayD[0] = diffuse.r; colorArrayD[1] = diffuse.g; colorArrayD[2] = diffuse.b; colorArrayS[0] = specular.r; colorArrayS[1] = specular.g; colorArrayS[2] = specular.b; // bind color for each mesh glUniform3fv(ambientLocation, 1, colorArrayA); glUniform3fv(diffuseLocation, 1, colorArrayD); glUniform3fv(specularLocation, 1, colorArrayS); // render all meshes glBindVertexArray(vaoID[i]); // bind our VAO glDrawElements(GL_TRIANGLES, scene->mMeshes[i]->mNumFaces*3, GL_UNSIGNED_INT, 0); glBindVertexArray(0); // unbind our VAO delete [] normalArray; delete [] colorArrayA; delete [] colorArrayD; delete [] colorArrayS; } shader->unbind(); app->display(); return; } void assimpRenderer::handleEvents() { sf::Event event; while (app->pollEvent(event)) { if (event.type == sf::Event::Closed) { app->close(); } if ((event.type == sf::Event::KeyPressed) && (event.key.code == sf::Keyboard::Escape)) { app->close(); } if (event.type == sf::Event::Resized) { glViewport(0, 0, event.size.width, event.size.height); } } return; } void assimpRenderer::mainLoop(float modelScale) { while (app->isOpen()) { renderScene(modelScale); handleEvents(); } } bool assimpRenderer::assImport(const std::string& pFile) { // read the file with some example postprocessing scene = importer.ReadFile(pFile, aiProcess_CalcTangentSpace | aiProcess_Triangulate | aiProcess_JoinIdenticalVertices | aiProcess_SortByPType); // if the import failed, report it if (!scene) { std::cerr << "Error: " << importer.GetErrorString() << std::endl; return false; } return true; } void assimpRenderer::genVAOs() { int vboIndex = 0; for (unsigned int i = 0; i < scene->mNumMeshes; i++, vboIndex+=2) { mesh = scene->mMeshes[i]; indexArray = new unsigned int[mesh->mNumFaces * sizeof(unsigned int) * 3]; // convert assimp faces format to array faceIndex = 0; for (unsigned int t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace* face = &mesh->mFaces[t]; std::memcpy(&indexArray[faceIndex], face->mIndices, sizeof(float) * 3); faceIndex += 3; } // generate VAO glGenVertexArrays(1, &vaoID[i]); glBindVertexArray(vaoID[i]); // generate IBO for faces glGenBuffers(1, &iboID[i]); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, iboID[i]); glBufferData(GL_ELEMENT_ARRAY_BUFFER, sizeof(GLuint) * mesh->mNumFaces * 3, indexArray, GL_STATIC_DRAW); // generate VBO for vertices if (mesh->HasPositions()) { glGenBuffers(1, &vboID[vboIndex]); glBindBuffer(GL_ARRAY_BUFFER, vboID[vboIndex]); glBufferData(GL_ARRAY_BUFFER, mesh->mNumVertices * sizeof(GLfloat) * 3, mesh->mVertices, GL_STATIC_DRAW); glEnableVertexAttribArray((GLuint)0); glVertexAttribPointer((GLuint)0, 3, GL_FLOAT, GL_FALSE, 0, 0); } // generate VBO for normals if (mesh->HasNormals()) { normalArray = new float[scene->mMeshes[i]->mNumVertices * 3]; unsigned int normalIndex = 0; for (unsigned int j = 0; j < scene->mMeshes[i]->mNumVertices * 3; j+=3, normalIndex++) { normalArray[j] = scene->mMeshes[i]->mNormals[normalIndex].x; // x normalArray[j+1] = scene->mMeshes[i]->mNormals[normalIndex].y; // y normalArray[j+2] = scene->mMeshes[i]->mNormals[normalIndex].z; // z } normalIndex = 0; glGenBuffers(1, &vboID[vboIndex+1]); glBindBuffer(GL_ARRAY_BUFFER, vboID[vboIndex+1]); glBufferData(GL_ARRAY_BUFFER, mesh->mNumVertices * sizeof(GLfloat) * 3, normalArray, GL_STATIC_DRAW); glEnableVertexAttribArray((GLuint)1); glVertexAttribPointer((GLuint)1, 3, GL_FLOAT, GL_FALSE, 0, 0); delete [] normalArray; } // tex coord stuff goes here // unbind buffers glBindVertexArray(0); glBindBuffer(GL_ARRAY_BUFFER, 0); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, 0); delete [] indexArray; } vboIndex = 0; return; } } file: shader.vert #version 150 core in vec3 in_Position; in vec3 in_Normal; uniform mat4 projectionMatrix; uniform mat4 viewMatrix; uniform mat4 modelMatrix; uniform vec3 lightPosition; uniform mat3 normalMatrix; smooth out vec3 vVaryingNormal; smooth out vec3 vVaryingLightDir; void main() { // derive MVP and MV matrices mat4 modelViewProjectionMatrix = projectionMatrix * viewMatrix * modelMatrix; mat4 modelViewMatrix = viewMatrix * modelMatrix; // get surface normal in eye coordinates vVaryingNormal = normalMatrix * in_Normal; // get vertex position in eye coordinates vec4 vPosition4 = modelViewMatrix * vec4(in_Position, 1.0); vec3 vPosition3 = vPosition4.xyz / vPosition4.w; // get vector to light source vVaryingLightDir = normalize(lightPosition - vPosition3); // Set the position of the current vertex gl_Position = modelViewProjectionMatrix * vec4(in_Position, 1.0); } file: shader.frag #version 150 core out vec4 out_Color; uniform vec3 ambientColor; uniform vec3 diffuseColor; uniform vec3 specularColor; smooth in vec3 vVaryingNormal; smooth in vec3 vVaryingLightDir; void main() { // dot product gives us diffuse intensity float diff = max(0.0, dot(normalize(vVaryingNormal), normalize(vVaryingLightDir))); // multiply intensity by diffuse color, force alpha to 1.0 out_Color = vec4(diff * diffuseColor, 1.0); // add in ambient light out_Color += vec4(ambientColor, 1.0); // specular light vec3 vReflection = normalize(reflect(-normalize(vVaryingLightDir), normalize(vVaryingNormal))); float spec = max(0.0, dot(normalize(vVaryingNormal), vReflection)); if (diff != 0) { float fSpec = pow(spec, 128.0); // Set the output color of our current pixel out_Color.rgb += vec3(fSpec, fSpec, fSpec); } } I know it's a lot to look through, but I'm putting most of the code up so as not to assume where the problem is. Thanks in advance to anyone who has some time to help me pinpoint the problem(s)! I've been trying to sort it out for two days now and I'm not getting anywhere on my own.

    Read the article

  • check array against each other, to determine response

    - by Johnny
    So, I have an array that has 6 variables in it that I need to check against each other.. to determine what to return to the script calling the function.. All fields are of the datetime type from the database they are derived from. the fields: in1 out1 in2 out2 in3 out3 Array: Array( 'in1' => '2012-04-02 10:00:00), `out1` => '2012-04-02 14:00:00`, `in2` => '2012-04-02 14:30:00`, `out2` => '2012-04-02 18:00:00`, `in3` => NULL, `out3` => NULL ) the response: clocked_in or clocked_out What I need to figure out is, the best way to determine if the user is clocked in or clocked out by checking against this array.. so, if in1, out1 and in2 are not NULL then the user would be clocked in.. if in1 is not NULL but out1 is NULL then the user would be clocked out, etc.. Anyone have any ideas on the easiest way to achieve this without too many if statements? [WHAT WORKED] for ($i=1; $i <= 3; $i++) { if ($entities["in$i"] != NULL) { $ents = "clocked_in"; if ($entities["out$i"] != NULL) { $ents = "clocked_out"; } if ($entities["out3"] != NULL) { $ents = "day_done"; } } }

    Read the article

  • Is there a more efficient way to do this?

    - by garethdn
    I'm hoping there is a better way to the following. I'm creating a jigsaw-type application and this is the current code i'm using: -(void) touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [touches anyObject]; //location of current touch CGPoint location = [touch locationInView:self.view]; if ([touch view] == img1) { [self animateFirstTouch:img1 withLocation:location]; } else if ([touch view] == img2) { [self animateFirstTouch:img2 withLocation:location]; } else if ([touch view] == img3) { [self animateFirstTouch:img3 withLocation:location]; } else if ([touch view] == img4) { [self animateFirstTouch:img4 withLocation:location]; } else if { ...... ...... } else if ([touch view] == img40) { [self animateFirstTouch:img40 withLocation:location]; return; } } I'm hoping that there is a better, more efficieny way to do this, rather than naming every image. I'm thinking something like, if touch view is equal to a UIImageView, then perform some task. The same for touchesEnded: -(void) touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [touches anyObject]; //location of current touch CGPoint location = [touch locationInView:self.view]; if ([touch view] == image1) { [self animateReleaseTouch:image1 withLocation:location]; } else if ([touch view] == image2) { [self animateReleaseTouch:image2 withLocation:location]; } else if ([touch view] == image3) { [self animateReleaseTouch:image3 withLocation:location]; } else if ([touch view] == image4) { [self animateReleaseTouch:image4 withLocation:location]; } else if{ ...... ...... } else if ([touch view] == image40) { [self animateReleaseTouch:image40 withLocation:location]; } return; } Any help please?

    Read the article

  • php read CSV with various amount of delimiters

    - by jreed121
    I've got a script that reads in from a CSV file and sometimes the CSV files it receives contains an uneven amount of delimiters/columns so the first row could have 30 columns, the 2nd could have 20, etc. I can think of a few solutions myself ie: Count the delimiters in the widest row, then append the proper amount to each row that is short to make them even. But I was wondering if anyone had a more elegant method of doing this.

    Read the article

  • Yii - Custom GridView with Multiple Tables

    - by savinger
    So, I've extended GridView to include an Advanced Search feature tailored to the needs of my organization. Filter - lets you show/hide columns in the table, and you can also reorder columns by dragging the little drag icon to the left of each item. Sort - Allows for the selection of multiple columns, specify Ascending or Descending. Search - Select your column and insert search parameters. Operators tailored to data type of selected column. Version 1 works, albeit slowly. Basically, I had my hands in the inner workings of CGridView, where I snatch the results from the DataProvider and do the searching and sorting in PHP before rendering the table contents. Now writing Version 2, where I aim to focus on clever CDbCriteria creation, allowing MySQL to do the heavy lifting so it will run quicker. The implementation is trivial when dealing with a single database table. The difficulty arises when I'm dealing with 2 or more tables... For example, if the user intends to search on a field that is a STAT relation, I need that relation to be present in my query. Here's the question. How do I assure that Yii includes all with relations in my query so that I include comparisons? I've included all my relations with my criteria in the model's search function and I've tried CDbCriteria's together ... public function search() { $criteria=new CDbCriteria; $criteria->compare('id', $this->id); $criteria->compare( ... ... $criteria->with = array('relation1','relation2','relation3'); $criteria->together = true; return new CActiveDataProvider( get_class($this), array( 'criteria'=>$criteria, 'pagination' => array('pageSize' => 50) ));} But I still get errors like this... CDbCommand failed to execute the SQL statement: SQLSTATE[42S22]: Column not found: 1054 Unknown column 't.relation3' in 'where clause'. The SQL statement executed was: SELECT COUNT(DISTINCT `t`.`id`) FROM `table` `t` LEFT OUTER JOIN `relation_table` `relation0` ON (`t`.`id`=`relation0`.`id`) LEFT OUTER JOIN `relation_table` `relation1` ON (`t`.`id`=`relation1`.`id`) WHERE (`t`.`relation3` < 1234567890) Where relation0 and relation1 are BELONGS_TO relations, but any STAT relations are missing. Furthermore, why is the query a SELECT COUNT(DISTINCT 't'.'id') ?

    Read the article

  • Sax Parsing strange element with nokogiri

    - by SHUMAcupcake
    I want to sax-parse in nokogiri, but when it comes to parse xml element that have a long and crazy xml element name or a attribute on it.. then everthing goes crazy. Fore instans if I like to parse this xml file and grab all the title element, how do I do that with nokogiri-sax. <titles> <title xml:lang="sv">Arkivvetenskap</title> <title xml:lang="en">Archival science</title> </titles>

    Read the article

  • Send form with jQuery using keypress()

    - by kexxcream
    What I have so far: I have a form in PHP that contain the following: <input type="submit" id="0" name="0" value="This button"> <input type="submit" id="1" name="1" value="This button"> <input type="hidden" id="response" name="response" value="150"> The problem: I would like to send the response value together with either name=1 or name=0, depending on which button the user submit. However, this should be done using the keyboard letters A and S. If a user press the letter A then the value 0 should be submitted, and if S is pressed then the value 1 should be sent. The jQuery code: $(document).ready(function() { // listens for any navigation keypress activity $(document).keypress(function(e) { switch(e.which) { // user presses the "a" case 97: submitViaKeypress("0"); break; // user presses the "s" key case 115: submitViaKeypress("1"); break; } }); }); // shows a given element and hides all others function submitViaKeypress(element_id) { var response = $('#response').attr('value'); $.ajax({ type: "POST", url: "initiate.php", data: "response=" + response + "&" + element_id + "=" + element_id }); } Goal: That "initiate.php receive two POST variables (response and either 0 or 1).

    Read the article

  • .net MVC 3 multiple columns

    - by Teodor
    i want to display a list in more columns with 5 items/column my code now doesn't work as expected: @{ var c=0; } <div > @foreach (var item in Model) { c += 1; @Html.ActionLink(item.Judet , "Browse", new { judet = item.Judet }) <br /> if (c == 5){ Response.Write("</div><div style='border: 1px solid red;'>"); c = 0; } } </div>

    Read the article

  • if there is any technique to insert values into multiple tables in sql Server 2008 Database?

    - by Krishanu Dey
    I just wanted to know, if there is any technique to insert values into multiple tables in sql Server 2008 Database? I've got the following cmd.CommandText = "Insert into tb1 (col1, col2, col3) values (@col1, @col2, @col3); Insert into tb2 (col1, col2, col3) values (@col11, @col12, @col13);"; cmd.Parameters.AddWithValue("col1","val1"); cmd.Parameters.AddWithValue("col2", "val2"); cmd.Parameters.AddWithValue("col3", "val3"); cmd.Parameters.AddWithValue("col11","val4"); cmd.Parameters.AddWithValue("col12", "val5"); cmd.Parameters.AddWithValue("col13", "val6"); But will values be inserted to "tb1" even if "Insert into tb2..." part gets an error? if yes then it is not what i wanted. i wanted that, values should not be inserted into tb1 if tb2 part gets an error. please help me out.

    Read the article

  • How can I bind a javascript dialog using Knockout?

    - by Brian
    I've got a list of data in an observableArray and I want to show it in a javascript dialog window (I'm using jQuery.blockUI if it matters). Unfortunately the dialog seems to come unbound after the page is loaded. The dialog initializes correctly (the data is displayed), but it isn't updating with changes. There are no Javascript errors and I've moved the binding to after the dialog is generated and added to the document (no effect). I've also tried calling ko.applyBinding on the main div that makes up the dialog but that, for some reason, causes part of the main page to hide (the DOM is there, but they are hidden). EDIT: I've created a project on jsfiddle that reproduces the problem. The main culprit seems to be wrapping the content of the dialog in a div. If I show the content directly it seems to work (of course I can't do that, the wrappers provide a common style for our dialogs). I'm recovering from the flu and could easily be missing something obvious, but I've been trying all day and nothing is coming to me. Any ideas?

    Read the article

  • linked list sort function only loops once

    - by Tristan Pearce
    i have a singly linked list that i am trying to sort from least to greatest by price. here is what i have so far struct part { char* name; float price; int quantity; struct part *next; }; typedef struct part partType; partType *sort_price(partType **item) { partType *temp1 = *item; partType *temp2 = (*item)->next; if ( *item == NULL || (*item)->next == NULL ) return *item; else { while ( temp2 != NULL && temp2->next != NULL ){ if (temp2->price > temp2->next->price){ temp1->next = temp2->next; temp2->next = temp2->next->next; temp1->next->next = temp2; } temp1 = temp2; temp2 = temp2->next; } } return *item; } the list is already populated but when i call the sort function it only swaps the first two nodes that satisfy the condition in the if statement. I dont understand why it doesnt do the check again after the two temp pointers are incremented.

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >