Monthly Archives

Articles indexed in October 2013

Page 27/261 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• corrupted, hidden, wireless network adapter from "Network Connections" in Windows 7

  - by srihari reddy

  The issue is that when I install a wireless network adapter on my Windows 7 Professional machine I have no connectivity, the system tray icon has a red X. First, I tried the obvious, install updated drivers from the manufacturer. When I did this, the Network Connections icon had gray bars and there was no connectivity. So I tried installling the network adapter on a different computer on the same network and I verified that it does work with no issues. Next, I ran scan disk with no issues. Next, I ran sfc as admin with no issues. At this point I turned to the router and turned SSID broadcast on but that didn't help. I turned MAC address filtering off at the router but that didn't help. Whenever I installed the original network adapter (a wireless N usb adapter with WPA2 TKIP+AES) it showed up as "Wireless Network Connection 2" with a grayed out icon and no connectivity. Lastly, I tried installing two different "verified working" usb wireless adapters on to the Windows 7 Pro machine. The results were the same "Wireless Network Connection 2" that had a green bar icon but no connectivity. I installed the manufacturers software and it indicated the NIC was not there even thought the driver installed successfully in Device Manager. I guess I should mention, I first tried (insanely in vain) to use the (worthless) Windows Network troubleshooter. The results were....drumroll please... There is a problem with the network adapter... well No Duh! Also, during all of this the network adapter is always showing as "Working Properly" in the properties dialogue of Device Manager for the wireless NIC. I checked for hidden devices in Device Manager but there were none. Here is my fundamental question that I've tried to find in the Windows 7 support center with no luck. How do I remove/delete/uninstall network adapters from the Windows 7 registry? in particular hidden, corrupted network adapters, that used to be working.

  Read the article

• "no MPM loaded", but I'm not even using mpm

  - by ezuk

  Running Apache2 on Ubuntu Precise64 in Vagrant. When I try to start it, it says: vagrant@precise64:/etc/apache2$ /etc/init.d/apache2 start * Starting web server apache2 * * The apache2 configtest failed. Output of config test was: AH00534: apache2: Configuration error: No MPM loaded. Action 'configtest' failed. The Apache error log may have more information. But the thing is, my /etc/apache2/apache2.conf file doesn't call for MPM anywhere! I would paste it here but it would make for a huge post... I tried looking up the error log, but I can't find that anywhere, either. Help?

  Read the article

• Unable to use autossh in background even with absolute path

  - by Zagorax

  I would love to set autossh to run at boot adding it to /etc/rc.local. This command works: autossh -i /root/.ssh/id_rsa -R 2522:localhost:22 user@address But, if I add the -f option autossh -f -i /root/.ssh/id_rsa -R 2522:localhost:22 user@address The ssh session is not started. As you can see, I'm using an absolute path for my identity file, so this seems to be a different problem from the one stated here: autossh in background does not work From /var/log/syslog: Oct 18 11:08:39 raspberrypi autossh[2417]: starting ssh (count 1) Oct 18 11:08:39 raspberrypi autossh[2417]: ssh child pid is 2418 Oct 18 11:08:39 raspberrypi autossh[2417]: ssh exited with status 0; autossh exiting I'm using it with debian wheezy on a raspberry pi, autossh version 1.4c. Could it be that it's passing the -f option to ssh instead?

  Read the article

• Can I set up an "involuntary" conference call with Freeswitch?

  - by Atilla Filiz

  I am trying to set up a SIP/RTP public announcement infrastructure. Basically there are several slave user agents that are configured to answer automatically, and a master UA which should be able to call all of them and make announcements. A way to work around seems creating a conference and making all UAs to join via some RPC mechanism but I don't want to go that direction unless I have to. The slave UAs are linphone and I haven't decided on the master agent yet.

  Read the article

• Write hash password to LDAP when creating a new user

  - by alibaba

  I am working on a project with a central user database system. One of the requirements of the system is that there should be only one set of users for all the application. FreeRADIUS and Samba are two my applications that both use LDAP as their backend. Since users must be the same for the entire system that contains many other applications, I have to read the list of users from the central database and recreate them in the LDAP directories for Samba and FreeRADIUS. The problem is that users are sent to me from another entity and I can save them in the database with their hash passwords. I don't have access to their cleartext passwords. I am wondering if I could enter directly a hash password for a new user in LDAP with my preferred hash mechanism. If not, can any one tell me what strategy I have to use? I am running my server on UBUNTU 12.04 and all other applications are the latest versions. My database system is PostgreSQL 9.2. Thank you

  Read the article

• Unable to login into CentOS

  - by Rendl

  I had setup a multinode cluster using CentOS with VMware yesterday. Today when I reboot the nodes I get the below error on startup. "there is a problem with the configuration server status 256 centOS" (/usr/libexec/gconf-sanity-check-2 ) I am unable to login as root or any user as the screen is frozen. The solutions online is to change the permissions for some tmp files. My problem is I am unable to access the terminal as I cannot login. Also on reboot I do not have any recovery options in CentOS. I only see command line GRUB. I am new to linux and Hadoop.Pls help asap.

  Read the article

• arcserve vs backup exec vray

  - by Luigi

  I have to buy one backup software to backup a vmware environment with the following server/applications: mixed microsoft windows 2003/2008/2012 server standard environment sql server 2005/2008 mixed linux centos/ubuntu servers postgresql sap environment exchange 2007 linux fileservers windows fileservers active directory random applications/sqlserver/fileserver on workstations xp/7/8 my hardware is: 5 blades on ibm bladecenter, various san, lto4 on 4gbit fiber channel connected to a windows2003 blade where I will install the backup software (backupexec or arcserve). What are your advice and comments over backupexec vray or arcserve choice ? I know that arcserve have a lower price. I used backup exec for some years but I found it pretty complicated. Thank you.

  Read the article

• Remote desktop fails with user denied until client reboot

  - by Andrew J. Brehm

  Sometimes (but often enough to anoy) Remote Desktop Connection cannot connect to a server (2008 R2 but maybe also 2003) and claims that "The connection was denied because the user account is not authorized for remote login." The user is always authorized for remote login and the connection works from other clients. (Although this is the very same message that appears when a user really isn't autorized for remote login.) The problem always goes away after a client restart. The client is always Windows 7 but I have no (other) reason to assume that it only affects Windows 7 clients. Any idea what causes this?

  Read the article

• Installing Phusion Passenger 4.0.20 on Ubuntu 13.10

  - by tempestfire2002

  So I'm trying to install Passenger on the newest version of KUbuntu (13.10). I installed Apache2 using the apache2-mpm-worker package using the Muon Package Manager. And these are the commands I ran. rvmsudo gem install passenger rvmsudo passenger-install-apache2-module But I keep getting the following errors: [Fri Oct 18 15:52:13.227790 2013] [core:warn] [pid 13095] AH00111: Config variable ${APACHE_LOCK_DIR} is not defined [Fri Oct 18 15:52:13.227933 2013] [core:warn] [pid 13095] AH00111: Config variable ${APACHE_PID_FILE} is not defined [Fri Oct 18 15:52:13.227969 2013] [core:warn] [pid 13095] AH00111: Config variable ${APACHE_RUN_USER} is not defined [Fri Oct 18 15:52:13.227991 2013] [core:warn] [pid 13095] AH00111: Config variable ${APACHE_RUN_GROUP} is not defined [Fri Oct 18 15:52:13.228026 2013] [core:warn] [pid 13095] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Oct 18 15:52:13.231737 2013] [core:warn] [pid 13095:tid 3074562624] AH00111: Config variable ${APACHE_RUN_DIR} is not defined [Fri Oct 18 15:52:13.232760 2013] [core:warn] [pid 13095:tid 3074562624] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Oct 18 15:52:13.233043 2013] [core:warn] [pid 13095:tid 3074562624] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Oct 18 15:52:13.233078 2013] [core:warn] [pid 13095:tid 3074562624] AH00111: Config variable ${APACHE_LOG_DIR} is not defined AH00526: Syntax error on line 74 of /etc/apache2/apache2.conf: Invalid Mutex directory in argument file:${APACHE_LOCK_DIR} -------------------------------------------- WARNING: Apache doesn't seem to be compiled with the 'prefork', 'worker' or 'event' MPM Phusion Passenger has only been tested on Apache with the 'prefork', the 'worker' and the 'event' MPM. Your Apache installation is compiled with the '' MPM. We recommend you to abort this installer and to recompile Apache with either the 'prefork', the 'worker' or the 'event' MPM. Press Ctrl-C to abort this installer (recommended). Press Enter if you want to continue with installation anyway. The result of my running apache2ctl -V is: Server version: Apache/2.4.6 (Ubuntu) Server built: Aug 9 2013 14:31:04 Server's Module Magic Number: 20120211:23 Server loaded: APR 1.4.8, APR-UTIL 1.5.2 Compiled using: APR 1.4.8, APR-UTIL 1.5.2 Architecture: 32-bit Server MPM: worker threaded: yes (fixed thread count) forked: yes (variable process count) Server compiled with.... -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=256 -D HTTPD_ROOT="/etc/apache2" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="mime.types" -D SERVER_CONFIG_FILE="apache2.conf" As can be seen, the server is compiled with the worker MPM, so why is passenger complaining? And how do I solve the above errors (warnings, really, but to be safe, I'd like to not have any warnings)? Thanks.

  Read the article

• software to view logs on remote server

  - by Tarun

  I have configured syslog server on my linux machine like this Linux Machine (syslog client) -- Linux Machine (syslog server) I have configured it and its working properly. Now, the problem is I want to look at the logs located on remote server in a particular directory for example /var/log/host-ip/httpd.log. One way is that I use ssh for that and then see those logs using commands like tail etc. So is there any Browser based graphical utility which I can use on my machine in which I just give the remote folder location, ip-address etc. and the software shows me the logs present on that remote server. Thanks.

  Read the article

• Preventing 304 Not Modified Requests with nginx

  - by ustun

  I am running nginx, and have the following block for expiration: expires 52w; However when I use Google Chrome Developer Tools to observe network traffic, some of the assets are loaded from cache (200-from cache) while most of the assets are making a request to the server (304 Not Modified). I want to load all assets from cache without communicating with the server if possible. (200-from cache) What would be the required change in my nginx configuration?

  Read the article

• Apache will not stop/start gracefully

  - by ddjammin

  CentOs 6 64bit running apache 2.2.15-29.el6.centos. When I try to stop/start or restart httpd I get an error that says it has failed. A tail of the error log is below. I also noticed that a httpd.pid file is not created even though it is configured in the main conf file. If I set selinux to permissive, it works just fine. I do not want to run it with selinux disabled. If I delete the SSL_Mutex file it will start. HTTPD was running fine until I tried to add the ssl configuration. I copied over the ssl.conf file from a working server into the conf.d folder. I also copied a sslcert folder into the conf folder. It contains the certs, key, csr and password file. I think the problem has to do with the selinux context for the sslcert folder that was copied but I am not certain and not sure how to fix it. Below is the security context for the sslcert folder after executing restorecon -R sslcert ls -Z -rw-r--r--. root root system_u:object_r:httpd_config_t:s0 httpd.conf -rw-r--r--. root root system_u:object_r:httpd_config_t:s0 magic **drwxr-xr-x. root root system_u:object_r:httpd_config_t:s0 sslcert** tail -f /var/log/httpd/error_log [Thu Oct 17 13:33:19 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Oct 17 13:33:20 2013] [notice] Digest: generating secret for digest authentication ... [Thu Oct 17 13:33:20 2013] [notice] Digest: done [Thu Oct 17 13:33:20 2013] [warn] pid file /etc/httpd/logs/ssl.pid overwritten -- Unclean shutdown of previous Apache run? [Thu Oct 17 13:33:20 2013] [notice] Apache/2.2.15 (Unix) DAV/2 mod_ssl/2.2.15 OpenSSL/1.0.0-fips configured -- resuming normal operations [Thu Oct 17 21:04:48 2013] [notice] caught SIGTERM, shutting down [Thu Oct 17 21:06:42 2013] [notice] **SELinux policy enabled; httpd running as context system_u:system_r:httpd_t:s0** [Thu Oct 17 21:06:42 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Oct 17 21:06:42 2013] [error] (17)File exists: Cannot create SSLMutex with file `/etc/httpd/logs/ssl_mutex' I also saw mention of possible issues with semaphores. Below is the output of the current semaphores and apache is currently not running. ipcs -s ------ Semaphore Arrays -------- key semid owner perms nsems 0x00000000 0 root 600 1 0x00000000 65537 root 600 1 Finally selinux reports the following error. `sealert -a /var/log/audit/audit.log` 0% donetype=AVC msg=audit(1382034755.118:420400): avc: denied { write } for pid=3393 comm="httpd" name="ssl_mutex" dev=dm-0 ino=9513484 scontext=unconfined_u:system_r:httpd_t:s0 tcontext=unconfined_u:object_r:httpd_log_t:s0 tclass=file **** Invalid AVC allowed in current policy *** 100% doneERROR: failed to read complete file, 1044649 bytes read out of total 1043317 bytes (/var/log/audit/audit.log) found 1 alerts in /var/log/audit/audit.log -------------------------------------------------------------------------------- SELinux is preventing /usr/sbin/httpd from remove_name access on the directory ssl_mutex.

  Read the article

• Trouble with apache starting on boot with ssl api key

  - by molleman

  Im Running on Centos, the trouble is when i restart my server i need to start my apache and varnish service I use this to start both of them service httpd restart && service varnish restart But i would likw both of them to start when i reboot the server I read i could use this chkconfig httpd on But this is only for apache could i do this chkconfig varnish on Finally when i do y usual start of httpd , i am asked for my api key for SSL , am i able to incorporate this into resarting both varnish and httpd on start up. Or am i doomed to run this command everytime i resart

  Read the article

• Forward the Wan IP to another Wan IP without changing the source address

  - by user195410

  I have tried this case by using the NAT function in iptables but fail example. PC A IP is 1.1.1.1 (Win7) My Server IP is 2.2.2.2 (CentOS 6.2) target Server B is 3.3.3.3 (Windows server 2003) Flow: PC A WanIP -- My Server A -- Server B (WanIP) My iptables rules: 1. iptables -t nat -A PREROUTING -d 2.2.2.2 -p tcp --dport 80 -j DNAT --to-destination 3.3.3.3:80 2. iptables -t nat -A POSTROUTING -d 2.2.2.2 -j MASQUERADE finally, i can access server B website by enter 2.2.2.2:80 but when i checked the access log at Server B i found it's source address had been changed to src:2.2.2.2 dst:3.3.3.3 please help me to do how to get the real address is src:1.1.1.1 dst:3.3.3.3

  Read the article

• Cfengine Perform action based on variable value

  - by Daniel

  In cfengine, I have a variable that is set to the output of a command. Let say variable myoutput is set to "hi world". How can I execute a command based on the contents of myoutput. I would like to do something like this (sudo cfengine code): bundle agent test { vars: "myoutput" string => execresult("echo 'hi world';","noshell"); commands: myoutput=="hi world":: "/usr/bin/php myaction.php"; }

  Read the article

• Mail to Mailenable group sometimes bounces back because it cannot find one of the group members

  - by Stanley

  I am using MailEnable Enterprise Edition 6.53. On one of my PostOffices I have a group address set up with 5 members in the group. Under normal circumstances when someone sends a mail to this group then the mail gets successfully forwarded to all 5 members in the group. However, every now and then when a recipient sends to the group they get a bounce back message from us that the mail could not be delivered because one of the user's addresses was not found on the server. This could happen for any one of the 5 users in the group. The error message looks like: Message could not be delivered. Error was: The email address is not available on this system The following recipient(s) could not be reached: [SF:mydomain.com/my_username] What could be causing this and how do I fix it? Obviously the mailbox DOES exist as, under normal circumstances, when someone mails the group the mail gets delivered successfully and forwarded to all group members. All the mailboxes most definitely DO exist on the system. EDIT: I have done more investigation and I see an error in Windows Event Viewer: MailEnable Database Provider error: 0 FAILURE: (SQLDriverConnect), Module: MEIMAPS.exe; Error: [Microsoft][ODBC SQL Server Driver]Timeout expired This seems to be related to http://forum.mailenable.com/viewtopic.php?p=53157 and http://www.mailenable.com/kb/content/view.asp?ID=ME020535 but the setups in these links use MySQL as a database whereas we use SQL Server. Maybe this shines some new light on the problem?

  Read the article

• How to restore Linode to Vagrant VM?

  - by Iain Elder

  I'm trying to set up a Linux development environment so I can safely make changes to my website without breaking the live site. Linode hosts my live site. A simple solution would be to host my development server on Linode as well, but I want to avoid doubling my hosting costs. The cheapest way I see is to use Vagrant on my Windows workstation to host my development environment. After I attempt to restore the backup to Vagrant and reboot the VM, I can no longer ssh into the Vagrant host. It's probably because by restoring the backup I overwrite some special Vagrant configuration, but I'm not sure how to avoid that. How do I make this approach work? If my approach is fundamentally wrong, can you suggest an alternative? Creating the backup On the Linode I used these commands to create a compressed copy of the entire filesystem, while ignoring things that shouldn't be included in the backup: $ sudo rsync -ahvz --exclude={/dev/*,/proc/*,/sys/*,/tmp/*,/run/*,/mnt/*,/backup/*} /* /backup/2 $ sudo tar -czf /backup/2.gz /backup/2 The backup file is called 2.gz because this is thesecond backup. The first backup is called 1.gz. I use WinSCP to copy the backup file to my Windows workstation. Setting up the Vagrant host I need a Vagrant box that matches my Linode operating system (Ubuntu 12.04.3 LTS, kernel 3.9.3). I selected the closet match from vagrantbox.es: Ubuntu Server Precise 12.04.3 amd64 Kernel is ready for Docker (Docker not included) On my workstation I ran these commands to add the box and initialize and boot an instance: $ vagrant box add ubuntu-precise http://nitron-vagrant.s3-website-us-east-1.amazonaws.com/vagrant_ubuntu_12.04.3_amd64_virtualbox.box $ mkdir linode-test $ cd linode-test $ vagrant init ubuntu-precise $ vagrant up Now Vagrant is running a machine with SSH on port 2222. The operating system version is the same. The kernel version is 3.8.0. Sounds close enough. Restoring the backup With WinSCP I copied the backup file 2.gz to /home/vagrant/2.gz on the Vagrant box. With PuTTY I connected via ssh to my new Vagrant box: On the box move the backup to the filesystem root. $ sudo mv 2.gz / Extract the archive to the filesystem root: $ sudo tar -xvpz -f 2.gz -C / --strip-components=2 (I discovered I need to use strip components because all files in the archive have the prefix backup/2/. I'll fix this for the next backup.) After the tar command completes, I log out of the box. Testing the backup When I try to log in again, it doesn't let me log in as vagrant with a password any more. It does let me log in as iain, my user on the live Linode, with a password. That surprised me because I disabled password authentication on my live Linode. I figured that I have to restart the ssh service for the change to take effect. Instead of restarting just ssh, I chose to restart the whole system. Now I can't even get to the login screen. PuTTY says "connection refused" when I try to connect. What went wrong?

  Read the article

• Backup, Migrate or Clone Failing CentOS 4 (LVM)

  - by Hegelworm

  I've been running a BlueQuartz CentOS 4 system (Nuonce.net distro) for a few years now and although the hard drive (Deskstar) has always been a bit noisy, on a few recent occasions I've heard it having trouble spinning up. Basically, I want to clone this drive to a similar sized one (80 Gig). I've spent many hours reading upon dd, dd_rescue, rsync, clonezilla and LVM mirroring yet the sheer number of options and nightmarish accounts has left me frozen - unable to make an informed decision as to how to start. I've made a few attempts. dd failed after about 2 hours, as, although the drives appeared to be identical on the surface (ATA Seagate Barracudas, Thai not Chinese), the destination drive is slightly smaller. My most recent attempt involved using a Debian CD to format the new drive and then rsync-ing everything over and editing the new drive's grub and fstab to reflect the changes. No joy here either as I hadn't chosen LVM when partitioning the destination drive and it wouldn't boot. As you can probably tell, I'm out of my depth here and a panic-invoking mixture of caution and frustration has prompted me to sign up here. The server itself, although not strictly a production environment, has a very specific installation of Festival, LAME and ffMpeg and provides the back-end for a Text-to-Speech jQuery plugin that I've built over the last 2 years. I'm also planning to rebuild the whole TTS system on Debian as the existing CentOS system still has PHP4 etc. For now though, I'd really like to just shift everything over to a new drive. As this is my first post, please feel free to lay any house rules on me that I might've overlooked; I've been hovering around StackOverflow for a while now but have only just signed up. Many thanks. Update: Thanks for your responses so far - it's much appreciated and makes me feel a little more confident when I can double-check things here. I had the idea of doing a fresh install of CentOS (from the original disk) on the new drive so the partitions and LVM were all set up correctly (after disconnecting my source drive to prevent painful mistakes). I then booted into rescue mode from the same CD, and, to avoid a conflicting label, changed the /boot partition's label using e2label to /bootnew. I then changed the VolGroup name using lvm vgrename from VolGroup00 to VolGroup001. I could then boot with both drives in. After mounting the new drive (via its VolGroup001 alias) into /newhd, I rsync-ed over everything I could to the new drive, using -avr switches and backslashes. Like mentioned here. I then disconnected my original source drive again, booted from the liveCD again, changed back the boot partition label from /bootnew to /boot using e2label and then renamed the VolGroup back to VolGroup00. I then rebooted and it went through the familiar start-up routine only to not find a host of files in proc, usr, lib, var etc. The boot did complete but there were lots of red 'FAILS'. I could log in with my existing creds, but the network was kaput, I couldn't startX (desktop GUI) and there were also a few (a lot) of error messages pertaining to iptables. Back to square one. I naively thought I'd nailed it. Shall I just buy a bigger hard drive and attempt the dd route? I've read that this can mess with LVM setups and there's the added risk of working on two unmounted drives at once with a low-level tool. Thanks again.

  Read the article

• USB transfer speed for Windows 7 is incredibly slow to my external drive

  - by Wolfram

  I'm running Windows 7 Pro and am try to backup 116 GB of data to my external 1 TB hard drive. My laptop has only USB 2.0 ports and my hard drive is USB 3.0 compatible, as is the cable I'm using. I understand that the transfer speed should still be in accordance with USB 2.0 speeds. However, right now I'm getting 135 KB/s and it's been gradually dropping. For an earlier transfer, I would get between 4 MB/s to 8 MB/s. So, I'm really just wondering what's going on with my transfer rate and what I can do to improve it. I'm currently about 35 GB into the 116 GB transfer. Another strange thing is that the window which shows the transfer status decided to max out at 835 MB, and therefore shows items remaining as 0. However, it is still performing the rest of the transfer, and I can see it still cycling through files. Now that I think about it, it seems plausible that the speed being shown by the window is calculated merely as total data transferred / time elapsed. Since the "counter" of data, as far as what is being displayed in the window, maxed out at 835 MB, as time increases, the speed shown is going to keep decreasing because the 'total data transferred' value isn't being incremented. So with that in mind, I suppose I don't actually know at what rate the data is being transferred currently. Nonetheless, my best speed earlier was only around 8 MB/s. Shouldn't USB 2.0 deliver closer to 35 MB/s? Also, if someone can tell me why the transfer status window is displaying the incorrect data information and how to fix this, that would also be appreciated.

  Read the article

• Windows memory logged on vs logged off

  - by Adi

  Let's say I power on my fresh installed Windows 7 x64 machine. After Windows boots up, there are a bunch of services being started in the background that start allocating memory. Then I enter my user/pass and Windows logs me in. Let's supose I don't do anythig else (I don't explicitely start any application) and I don't have any other app installed by me. So it's fresh install of my machine. My question is: how much memory is needed for all the UI & other stuff? Is it a good indicator to look into task manager and check all the processes started under my user name and sum up all the memory consumed by those processes to get the total amount of memory I am consuming just to stay logged on? Basically this is my question: how much memory is needed just to stay logged on? Now, if log off would all the memory be released back to the system so that the background services can benefit of? Also, I assume that there might be a different discussion for each Windows flavors (?)

  Read the article

• how to recover data from my disk - I accidentally copied with dd an iso on it

  - by sijoune

  I wanted to create a bootable usb from an iso image and i accidentally put as the output of the dd, instead of my usb drive, one of my hard disks. The iso was 3,3 GB and my disk is 1TB! And it was almost full. Can i at least restore the data that has not been overwritten? Right now i can't even mount it. I get this error: Error mounting /dev/sdd1 at /media/main/UDF Volume: Command-line `mount -t "udf" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,iocharset=utf8,umask=0077" "/dev/sdd1" "/media/main/UDF Volume"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdd1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Also since i know which filesystem my disk used if i reformat it to this filesystem is there any chance i can mount it and retrieve the rest of the files?

  Read the article

• Why do Windows 7 & 8 have different default behaviour when trying to modify contents of protected folder

  - by Ben

  Here's the situation: I have a Windows 7 PC and a Windows 8 PC and I'm logged in as the same domain user on both machines. My domain user is in the local Administrator group on both. When I run cmd.exe on each machine and then attempt to do this (also on both machines) mkdir "c:\Program Files\cheese" the Windows 8 PC gives an "Access Denied" error, while it works fine on the Windows 7 PC. I understand that C:\Program Files is a protected folder and I'm not interested in a debate on the morals of writing to such a folder directly. But I am interested in understanding what exactly has changed in Windows 8 to cause this. I don't seem to be able to find anything that acknowledges or explains this change in behaviour in Windows 8.

  Read the article

• Unnamed, hidden partitions on my 500 GB HD, HP Pavilion dm4 Laptop

  - by emotionull

  I have multiple doubts here. Its a Seagate 500GB 7200RPM HD. I had installed it few months back after my original Laptop HD stopped working. The current drives on my latop, as shown by the Windows Disk Management are: After installing the new HD, I had done a complete clean install of Windows 7 and I didn't create any parition myself, manually. So there are 4 drives. Even previously, before I installed this new HD, my laptop had 4 Partitions. But the there were no un-named partitions like the two in this case. The other two were HP tools and Recovery or something. It was pre-configured, Factory installed Windows. Also, now when I right cick on the unnamed Drives from Disk Management, all the options are greyed out (see image) except the delete partition image. So how do I know what's inside those partitions? Will it be ok if I delete them? I want install Ubuntu and dual boot it with my current windows installation. I cannot do it in current setup as there are already 4 partitions of my HD and if I will try to make a new partition, it will be a logical one (correct me if I am wrong here). So can I delete the un-named, hidden partitions and use them for Ubuntu? A bit unrelated question. As a backup option, can I use the Windows 7's Backup and Restore facility to keep a complete backup of all the drivers and system softwares.

  Read the article

• Skip "Sign in to your Microsoft account" (Windows 8.1 Setup)

  - by noloader

  I have an RT tablet and updated it to Windows 8.1. The update basically performs the new PC setup. I can't get past the "Sign into your Microsoft Account". Clicking "Next" does not allow me to proceed (and prompts me for an email address). Clicking "Don't have an account" does nothing because its not linked. The other two options are "Create an account" a "Privacy statement". I don't want to create an account, and I'm not interested in their perverted terms of service for an account. In Windows 8.0, we were given the option to use local authentication. How do I bypass this feature?

  Read the article

• Double MySQL Running on Mountain Lion

  - by Norris

  After I've done a full restart, my Apache PHP server doesn't connect to Local MySQL ( connecting via 127.0.0.1 because localhost for some reason fails always ). So I did this today: ? ~ mysqladmin shutdown -u root -p Enter password: ? ~ mysqladmin shutdown -u root -p Enter password: mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)' Check that mysqld is running and that the socket: '/tmp/mysql.sock' exists! Which basically means that I succeeded in shutting down mysql. But as soon as I did - Apache PHP successfully connect to MySQL and my local sites work without a hiccup until the next restart. Here are a few other details: (as you can tell - I've installed MySQL via brew) ? ~ sudo ps aux | grep mysql N 4774 0.0 0.0 2432768 620 s000 S+ 9:53AM 0:00.00 grep mysql N 4772 0.0 2.6 3030168 440688 ?? S 9:51AM 0:00.29 /usr/local/Cellar/mysql/5.6.13/bin/mysqld --basedir=/usr/local/Cellar/mysql/5.6.13 --datadir=/usr/local/var/mysql --plugin-dir=/usr/local/Cellar/mysql/5.6.13/lib/plugin --bind-address=127.0.0.1 --log-error=/usr/local/var/mysql/N.local.err --pid-file=/usr/local/var/mysql/N.local.pid N 4686 0.0 0.0 2433432 1000 ?? S 9:51AM 0:00.01 /bin/sh /usr/local/opt/mysql/bin/mysqld_safe --bind-address=127.0.0.1 N 4362 0.0 2.7 3120276 458728 ?? S 9:47AM 0:00.45 mysqld ? ~ lsof -i | grep mysql mysqld 4362 N 16u IPv6 0x76959e40691f9f93 0t0 TCP *:mysql (LISTEN) This is the weird thing: ? ~ killall -9 mysqld MySQL Is dead! Apache doesn't connect. Then, when I run: ? ~ sudo mysqladmin shutdown -u root -p Enter password: Apache is (again) able to successfully connect to MySQL. As far as I understand this means that I have two mysql servers setup and both of them are trying to start up at the same time, but I don't have the slightest idea on how to fix it. I've tried brew reinstalling but that didn't help. ? ~ which mysqladmin /usr/local/bin/mysqladmin ? ~ whence -p mysql /usr/local/bin/mysql

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >