Monthly Archives

Articles indexed in January 2011

Page 283/604 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

  • Common mistakes which lead to corrupted invariants

    - by Dave B.
    My main source of income is web development and through this I have come to enjoy the wonders of programming as my knowledge of different languages has increased over the years through work and personal play. At some point I reached a decision that my college education was not enough and that I wanted to go back to school to get a university degree in either computer science or software engineering. I have tried a number of things in my life and it took me a while before I found something that I feel is a passion and this is it. There is one aspect of this area of study that I find throws me off though. I find the formal methods of proving program correctness a challenge. It is not that I have trouble writing code correctly, I can look at an algorithm and see how it is correct or flawed but I struggle sometimes to translate this into formal definitions. I have gotten perfect or near perfect marks on every programming assignment I have done at the college level but I recently got a swath of textbooks from a guy from univeristy of waterloo and found that I have had trouble when it comes to a few of the formalisms. Well at this point its really just one thing specifically, It would really help me if some of you could provide to me some good examples of common mistakes which lead to corrupted invariants, especially in loops. I have a few software engineering and computer science textbooks but they only show how things should be. I would like to know how things go wrong so that it is easier to recognize when it happens. Its almost embarrassing to broach this subject because formalisms are really basic foundations upon which matters of substance are built. I want to overcome this now so that it does not hinder me later.

    Read the article

  • What is the proper way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?

    - by Denja
    Hi Linux Community, I find my self struggling with the slowness of windows OS once again. It's Time to change with the Ubuntu 10.10 64bit for I like to use a faster Operating System. My Hard Disk laptop has a RECOVERY and HP_TOOLS partition they are both Primary. I Have the System Recovery DVD for Windows 64bit should anything bad happen. Here's the layout I used with windows before: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,ad Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I wanted to make: * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows DATA partition (user files) NTFS - 120GB(Primary)(sda2);wanna share with Linux * Linux root Ext4 - 10GB (Extended)(sda3) (Ubuntu 10.10 64bit) * Linux home Ext3 - 90GB (Extended)(sda4) (Ubuntu 10.10 64bit) * Linux swap swap- RAM size, 3GB (sda5) * Linux root Ext3- 18GB (Extended) (sda6) (OpenSuse or Puppy or kubuntu) Here is my New Ubuntu 10.10 64bit layout in use now: * SYSTEM partition NTFS 199MB (Primary) (sda1) * (C:) Windows 7 system partition NTFS - 90GB (Primary) (sda2) * (D:) Windows 7 RECOVERY partition NTFS - 12,90GB (Primary) (sda3) * Linux system partition EXTENDED - 195,1GB (Logical) * Linux root Ext4- 10GB (Extended) (sda4) * Linux swap swap- RAMx2 size, 6,1GB (sda5) * Linux home Ext3- 179GB (Extended) (sda6) When I installed Ubuntu,I didn't know if I could wipe all previous partitions,because of the RECOVERY partition. So I just made the space for my extended partition with GParted by deleting the HP_TOOLS (Fat32). By doing this I managed somehow to install Ubuntu 64 with Success. And I also made the partitions for the swap or a third Linux OS as Jordan suggested. But I couldn't actually make the partitions for the shared NTFS.(no option!) Question 1: What is the proper way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?? Thank you in advance for your advises and suggestions and Happy New Year to All!!

    Read the article

  • How do I copy packages within a PPA from one release to another? (nonsensical "same version already has published binaries" error)

    - by Scott Ritchie
    I keep getting weird errors from launchpad when I try and copy the Maverick packages to Natty for the PPA. I select the wine1.3 package (not in Ubuntu), select "copy to this PPA", and then select "rebuild the resulting binaries". This error emerges: The following source cannot be copied: wine1.3 1.3.11-0ubuntu1 in maverick (same version already has published binaries in the destination archive) I have no idea what this error means but apparently it doesn't mean there are binaries in the destination archive.

    Read the article

  • Xaudio2 XAPO Effects

    - by Jason Champion
    I've been working with XAudio2. After looking at the samples, example code, and sparse documentation available from Microsoft and the MSDN, I've found that there aren't any easy-to-find resources on creating and using XAPO effects, nor any XAPO effects produced by third parties that I can download and/or buy. What it looks like is that if I create an app that uses XAPO effects, I'll have to create them all myself because there's no community of existing applications like there is with technologies like Apple's AU or Steinberg's VST. Is this true, or are there others using XAudio2 and XAPO and I just haven't found them? Is there a place to ask programmer-support-related questions about XAudio2 and related technologies (or is this the best destination)? The best I've found so far are the XNA forums, which are game-specific and sparsely populated in the audio area.

    Read the article

  • How to use the md5 hash?

    - by Ken
    Okay, so I'm learning php, html, and mysql to learn website development (for fun). One thing I still don't get is how to use md5 of sha1 hashes. I know how to hash the plain text, but say I want to make a login page. Since the password is hashed and can't be reversed, how would mysql know that the user-inserted password matches the hashed password in the database? Here is what I mean: $password = md5($_POST['password']); $query = ("INSERT INTO `users`.`data` (`password`) VALUES ('$password')"); I know that this snippet of script hashes the password, but how would I use this piece of code and make a login page? Any working examples would be great.

    Read the article

  • Porting a select loop application to Android with NDK. Design question.

    - by plaisthos
    Hi, I have an network application which uses a select loop like this: bool shutdown=false; while (!shutdown) { [do something] select(...,timeout); } THe main loop cannot work like this in an Android application anymore since the application needs to receive Intents, need to handle GUI, etc. I think I have basically three possibilities: Move the main loop to the java part of the application. Let the loop run in its own thread and somehow communicate from/to java. Screw Android <= 2.3 and use a native activity and use AInputQueue/ALooper instead of select. The first possibility is not easy since java has no select which works on fds. Simply using the select and return after each loop to java is not an elegant possibility either since that requires setting the timeout to something like 20ms to have a good response time in the java part of the program. The second probability sound nicer but I have do some communication between java and the c++/c part of the program. Things that cold work: Using a socket, kind of ugly. using native calls in the "java gui thread" and callback from native in the "c thread". Both threads need to have thread safe implementations but this is managable. I have not explored the third possibility but I think that it is not the way to go. I think I can hack something together which will work but I asking what is the best path to chose.

    Read the article

  • Asp.net text box is only returning the first value

    - by queryne
    C sharp newbie question...I have a simple asp.net form that has a textbox that collects phonenumbers to send SMS messages. If I bypass the form and hardcode the numbers using the following format: "2133211234",#1233211234" the code works fine. However when i try to use this same format using my form, the sms will ONLY send to the first number. I have a feeling i'm missing out on some property on my form that will accept all of the values. also any idea how how i can add some lines of code that will allow users to enter numbers like this: 3123211234,4123212344 and have it converted to the format above when the number is submitted? Any ideas? Thanks in advance.

    Read the article

  • C++0x and the Lack of Polymorphic Lambdas - Why?

    - by Dominar
    I've been reviewing the draft version of the upcoming C++0x standard. Specifically the section on lambdas, and am confused as to the reasoning for not introducing polymorphic lambdas. I had hoped we could use code such as the following: template<typename Container> void foo(Container c) { for_each(c.begin(),c.end(),[](T& t) { ++t; }); } What were the reasons: Was it the committee ran out of time? That polymorphic lambdas are too hard to implement? Or perhaps that they are seen as not being needed by the PTB?

    Read the article

  • Cannot pull correct data from a Javascript array into an HTML form

    - by Isaac
    I am trying to return the description value of the corresponding author name and book title(that are typed in the text boxes). The problem is that the first description displays in the text area no matter what. <h1>Bookland</h1> <div id="bookinfo"> Author name: <input type="text" id="authorname" name="authorname"></input><br /> Book Title: <input type="text" id="booktitle" name="booktitle"></input><br /> <input type="button" value="Find book" id="find"></input> <input type="button" value="Clear Info" id="clear"></input><br /> <textarea rows="15" cols="30" id="destin"></textarea> </div> JavaScript: var bookarray = [{Author: "Thomas Mann", Title: "Death in Venice", Description: "One of the most famous literary works of the twentieth century, this novella embodies" + "themes that preoccupied Thomas Mann in much of his work:" + "the duality of art and life, the presence of death and disintegration in the midst of existence," + "the connection between love and suffering and the conflict between the artist and his inner self." }, {Author: "James Joyce", Title: "A portrait of the artist as a young man", Description: "This work displays an unusually perceptive view of British society in the early 20th century." + "It is a social comedy set in Florence, Italy, and Surrey, England." + "Its heroine, Lucy Honeychurch, struggling against straitlaced Victorian attitudes of arrogance, narroe mindedness and sobbery, falls in love - while on holiday in Italy - with the socially unsuitable George Emerson." }, {Author: "E. M. Forster", Title: "A room with a view", Description: "This book is a fictional re-creation of the Irish writer'sown life and early environment." + "The experiences of the novel's young hero,unfold in astonishingly vivid scenes that seem freshly recalled from life" + "and provide a powerful portrait of the coming of age of a young man ofunusual intelligence, sensitivity and character. " }, {Author: "Isabel Allende", Title: "The house of spirits", Description: "Allende describes the life of three generations of a prominent family in Chile and skillfully combines with this all the main historical events of the time, up until Pinochet's dictatorship." }, {Author: "Isabel Allende", Title: "Of love and shadows", Description: "The whole world of Irene Beltran, a young reporter in Chile at the time of the dictatorship, is destroyed when" + "she discovers a series of killings carried out by government soldiers." + "With the help of a photographer, Francisco Leal, and risking her life, she tries to come up with evidence against the dictatorship." }] function searchbook(){ for(i=0; i &lt; bookarray.length; i++){ if ((document.getElementById("authorname").value &amp; document.getElementById("booktitle").value ) == (bookarray[i].Author &amp; bookarray[i].Title)){ document.getElementById("destin").value =bookarray[i].Description return bookarray[i].Description } else { return "Not Found!" } } } document.getElementById("find").addEventListener("click", searchbook, false)

    Read the article

  • Which HTML and CSS standards reached W3C Recommendation status?

    - by mxn 4000
    Could anyone please tell me which HTML/XHTML and CSS versions reached "Recommendation" (not "Candidate Recommendation") status? I tried to find the documents at http://www.w3.org/TR/tr-status-stds and they appear to be: 1) "XHTML™ 1.0 The Extensible HyperText Markup Language (Second Edition)" 2) "Cascading Style Sheets (CSS1) Level 1 Specification" Please correct me if I'm wrong. These are kinda neanderthal technologies...

    Read the article

  • awk and cat - How to ignore multiple lines?

    - by Filipe YaBa Polido
    I need to extract Voip log from a D-Link router, so I've setup a little python script that executes a command in this router via telnet. My script does a "cat /var/log/calls.log" and returns the result, however... it also sends non-important stuff, like the BusyBox banner, etc... How can I ignore lines from 1 to 6 and the last 2 ? This is my current output: yaba@foobar:/stuff$ python calls.py BusyBox v1.00 (2009.04.09-11:17+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. DVA-G3170i/PT # cat /var/call.log 1 ,1294620563,2 ,+351xxx080806 ,xxx530802 ,1 ,3 ,1 DVA-G3170i/PT # exit And I just need: 1 ,1294620563,2 ,+351xxx080806 ,xxx530802 ,1 ,3 ,1 (it can have multiple lines) So that I can save it to a CSV and later to a sql db. Thanks, and sorry my bad english.

    Read the article

  • Understanding Javascript's difference between calling a function, and returning the function but executing it later.

    - by Squeegy
    I'm trying to understand the difference between foo.bar() and var fn = foo.bar; fn(); I've put together a little example, but I dont totally understand why the failing ones actually fail. var Dog = function() { this.bark = "Arf"; }; Dog.prototype.woof = function() { $('ul').append('<li>'+ this.bark +'</li>'); }; var dog = new Dog(); // works, obviously dog.woof(); // works (dog.woof)(); // FAILS var fnWoof = dog.woof; fnWoof(); // works setTimeout(function() { dog.woof(); }, 0); // FAILS setTimeout(dog.woof, 0); Which produces: Arf Arf undefined Arf undefined On JSFiddle: http://jsfiddle.net/D6Vdg/1/ So it appears that snapping off a function causes it to remove it's context. Ok. But why then does (dog.woof)(); work? It's all just a bit confusing figuring out whats going on here. There are obviously some core semantics I'm just not getting.

    Read the article

  • Python: Which encoding is used for processing sys.argv?

    - by EOL
    What encoding are the elements of sys.argv in, in Python? are they encoded with the sys.getdefaultencoding() encoding? sys.getdefaultencoding(): Return the name of the current default string encoding used by the Unicode implementation. PS: As pointed out in some of the answers, sys.stdin.encoding would indeed be a better guess. I would love to see a definitive answer to this question, though, with pointers to solid sources! PPS: As Wim pointed out, Python 3 solves this issue by putting str objects in sys.argv (if I understand correctly). The question remains open for Python 2.x, though. Under Unix, the LC_CTYPE environment variable seems to be the correct thing to check, no? What should be done with Windows (so that sys.argv elements are correctly interpreted whatever the console)?

    Read the article

  • Should I use WPF or ASP.NET for my next Web Application development?

    - by gap
    We have a web application that has been built using MySQL / PHP / Javascript+JQuery, with server-side HTML generation. The problem is that of the 10 software developers that work for the company, none are PHP experts (we're all .NET / C# developers). I need to make a recommendation to my management team on which technologies to use as the platform for the next generation of web application products. I want to leverage the .NET / C# expertise which the company has and is otherwise building, and so am inclined to recommend some Microsoft technologies. We don't want a client-side plugin, and we don't need flashy animations/multimedia, so I'm ruling out Silverlight. Is WPF ready for primetime? Is ASP.NET deprecated by WPF? How do I choose between these two technologies? Big Question, I know... I can refine it based on your comments if necessary. Thanks for taking the time.

    Read the article

  • EF4, MVC 3, Azure and Code First or Traditional

    - by RichardAlanA
    I am planning to build a web application using ASP MVC3 that runs on Azure with a SQL Azure back end. I would like to use the Microsoft stack and have no plans to ever change to another stack. I am looking into the use of WCF and WF but that would be in the future. I looked at the traditional and Code First approach to using Entity Framework but I can't see if there is any advantage in using one or the other approach. Sure they each have advantages but for me I don't care if my classes do inherit from EF classes. All I want is to find the most efficient solution. Can anyone out there give me some advice as to which approach might be the best. thanks very much Richard

    Read the article

  • Why does Celery work in Python shell, but not in my Django views? (import problem)

    - by TIMEX
    I installed Celery (latest stable version.) I have a directory called /home/myuser/fable/jobs. Inside this directory, I have a file called tasks.py: from celery.decorators import task from celery.task import Task class Submitter(Task): def run(self, post, **kwargs): return "Yes, it works!!!!!!" Inside this directory, I also have a file called celeryconfig.py: BROKER_HOST = "localhost" BROKER_PORT = 5672 BROKER_USER = "abc" BROKER_PASSWORD = "xyz" BROKER_VHOST = "fablemq" CELERY_RESULT_BACKEND = "amqp" CELERY_IMPORTS = ("tasks", ) In my /etc/profile, I have these set as my PYTHONPATH: PYTHONPATH=/home/myuser/fable:/home/myuser/fable/jobs So I run my Celery worker using the console ($ celeryd --loglevel=INFO), and I try it out. I open the Python console and import the tasks. Then, I run the Submitter. >>> import fable.jobs.tasks as tasks >>> s = tasks.Submitter() >>> s.delay("abc") <AsyncResult: d70d9732-fb07-4cca-82be-d7912124a987> Everything works, as you can see in my console [2011-01-09 17:30:05,766: INFO/MainProcess] Task tasks.Submitter[d70d9732-fb07-4cca-82be-d7912124a987] succeeded in 0.0398268699646s: But when I go into my Django's views.py and run the exact 3 lines of code as above, I get this: [2011-01-09 17:25:20,298: ERROR/MainProcess] Unknown task ignored: "Task of kind 'fable.jobs.tasks.Submitter' is not registered, please make sure it's imported.": {'retries': 0, 'task': 'fable.jobs.tasks.Submitter', 'args': ('abc',), 'expires': None, 'eta': None, 'kwargs': {}, 'id': 'eb5c65b4-f352-45c6-96f1-05d3a5329d53'} Traceback (most recent call last): File "/home/myuser/mysite-env/lib/python2.6/site-packages/celery/worker/listener.py", line 321, in receive_message eventer=self.event_dispatcher) File "/home/myuser/mysite-env/lib/python2.6/site-packages/celery/worker/job.py", line 299, in from_message eta=eta, expires=expires) File "/home/myuser/mysite-env/lib/python2.6/site-packages/celery/worker/job.py", line 243, in __init__ self.task = tasks[self.task_name] File "/home/myuser/mysite-env/lib/python2.6/site-packages/celery/registry.py", line 63, in __getitem__ raise self.NotRegistered(str(exc)) NotRegistered: "Task of kind 'fable.jobs.tasks.Submitter' is not registered, please make sure it's imported." It's weird, because the celeryd client does show that it's registered, when I launch it. [2011-01-09 17:38:27,446: WARNING/MainProcess] Configuration -> . broker -> amqp://GOGOme@localhost:5672/fablemq . queues -> . celery -> exchange:celery (direct) binding:celery . concurrency -> 1 . loader -> celery.loaders.default.Loader . logfile -> [stderr]@INFO . events -> OFF . beat -> OFF . tasks -> . tasks.Decayer . tasks.Submitter Can someone help?

    Read the article

  • Programmatically swap colors from a loaded bitmap to Red, Green, Blue or Gray, pixel by pixel.

    - by eyeClaxton
    Download source code here: http://www.eyeClaxton.com/download/delphi/ColorSwap.zip I would like to take a original bitmap (light blue) and change the colors (Pixel by Pixel) to the red, green, blue and gray equivalence relation. To get an idea of what I mean, I have include the source code and a screen shot. Any help would be greatly appreciated. If more information is needed, please feel free to ask. If you could take a look at the code below, I have three functions that I'm looking for help on. The functions "RGBToRed, RGBToGreen and RGBToRed" I can't seem to come up with the right formulas. unit MainUnit; interface uses Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, ExtCtrls, StdCtrls; type TMainFrm = class(TForm) Panel1: TPanel; Label1: TLabel; Panel2: TPanel; Label2: TLabel; Button1: TButton; BeforeImage1: TImage; AfterImage1: TImage; RadioGroup1: TRadioGroup; procedure FormCreate(Sender: TObject); procedure Button1Click(Sender: TObject); private { Private declarations } public { Public declarations } end; var MainFrm: TMainFrm; implementation {$R *.DFM} function RGBToGray(RGBColor: TColor): TColor; var Gray: Byte; begin Gray := Round( (0.90 * GetRValue(RGBColor)) + (0.88 * GetGValue(RGBColor)) + (0.33 * GetBValue(RGBColor))); Result := RGB(Gray, Gray, Gray); end; function RGBToRed(RGBColor: TColor): TColor; var Red: Byte; begin // Not sure of the algorithm for this color Result := RGB(Red, Red, Red); end; function RGBToGreen(RGBColor: TColor): TColor; var Green: Byte; begin // Not sure of the algorithm for this color Result := RGB(Green, Green, Green); end; function RGBToBlue(RGBColor: TColor): TColor; var Blue: Byte; begin // Not sure of the algorithm for this color Result := RGB(Blue, Blue, Blue); end; procedure TMainFrm.FormCreate(Sender: TObject); begin BeforeImage1.Picture.LoadFromFile('Images\RightCenter.bmp'); end; procedure TMainFrm.Button1Click(Sender: TObject); var Bitmap: TBitmap; I, X: Integer; Color: Integer; begin Bitmap := TBitmap.Create; try Bitmap.LoadFromFile('Images\RightCenter.bmp'); for X := 0 to Bitmap.Height do begin for I := 0 to Bitmap.Width do begin Color := ColorToRGB(Bitmap.Canvas.Pixels[I, X]); case Color of $00000000: ; // Skip any Color Here! else case RadioGroup1.ItemIndex of 0: Bitmap.Canvas.Pixels[I, X] := RGBToBlue(Color); 1: Bitmap.Canvas.Pixels[I, X] := RGBToRed(Color); 2: Bitmap.Canvas.Pixels[I, X] := RGBToGreen(Color); 3: Bitmap.Canvas.Pixels[I, X] := RGBToGray(Color); end; end; end; end; AfterImage1.Picture.Graphic := Bitmap; finally Bitmap.Free; end; end; end. Okay, I apologize for not making it clearer. I'm trying to take a bitmap (blue in color) and swap the blue pixels with another color. Like the shots below.

    Read the article

  • How to properly clean up Excel interop objects in C#

    - by HAdes
    I'm using the Excel interop in C# (ApplicationClass) and have placed the following code in my finally clause: while (System.Runtime.InteropServices.Marshal.ReleaseComObject(excelSheet) != 0) { } excelSheet = null; GC.Collect(); GC.WaitForPendingFinalizers(); Although, this kind of works the Excel.exe process is still in the background even after I close Excel. It is only released once my application is manually closed. Anyone realize what I am doing wrong, or has an alternative to ensure interop objects are properly disposed of. Thanks.

    Read the article

  • Stop debug stalling in eclipse

    - by Lumpy
    I recently installed eclipse on my Mac pro. I had previously been using eclipse on my mac book. When I run an app engine project on the mac book, it works fine. When I run it on my mac pro it brings me into the debugger where I have to click resume a few times but then everything works well again. I went looking into the debug settings and many other settings pages but everything looks the same. I don't remember making any changes to my mac book settings. The code is an exact copy on both machines. What am I missing here? What settings do I need to change.

    Read the article

  • Miller-rabin exception number?

    - by nightcracker
    Hey everyone. This question is about the number 169716931325235658326303. According to http://www.alpertron.com.ar/ECM.HTM it is prime. According to my miller-rabin implementation in python with 7 repetitions is is composite. With 50 repetitions it is still composite. With 5000 repetitions it is STILL composite. I thought, this might be a problem of my implementation. So I tried GNU MP bignum library, which has a miller-rabin primality test built-in. I tested with 1000000 repetitions. Still composite. This is my implementation of the miller-rabin primality test: def isprime(n, precision=7): if n == 1 or n % 2 == 0: return False elif n < 1: raise ValueError("Out of bounds, first argument must be > 0") d = n - 1 s = 0 while d % 2 == 0: d //= 2 s += 1 for repeat in range(precision): a = random.randrange(2, n - 2) x = pow(a, d, n) if x == 1 or x == n - 1: continue for r in range(s - 1): x = pow(x, 2, n) if x == 1: return False if x == n - 1: break else: return False return True And the code for the GMP test: #include <gmp.h> #include <stdio.h> int main(int argc, char* argv[]) { mpz_t test; mpz_init_set_str(test, "169716931325235658326303", 10); printf("%d\n", mpz_probab_prime_p(test, 1000000)); mpz_clear(test); return 0; } As far as I know there are no "exceptions" (which return false positives for any amount of repetitions) to the miller-rabin primality test. Have I stumpled upon one? Is my computer broken? Is the Elliptic Curve Method wrong? What is happening here? EDIT I found the issue, which is http://www.alpertron.com.ar/ECM.HTM. I trusted this applet, I'll contact the author his applet's implementation of the ECM is faulty for this number. Thanks. EDIT2 Hah, the shame! In the end it was something that went wrong with copy/pasting on my side. NOR the applet NOR the miller-rabin algorithm NOR my implementation NOR gmp's implementation of it is wrong, the only thing that's wrong is me. I'm sorry.

    Read the article

  • How to animate a path like it's being drawn, dot by dot? (Raphael.js)

    - by Anton
    How to animate a vector path like it's being drawn by hand? In other words, slowly show the path pixel by pixel. I'm using Raphaël.js, but if your answer is not library specific—like maybe there's some general programming pattern for doing that kind of thing (I'm fairly new to vector animation)—it's welcome! Update I know it's easy to do with straight paths, as easy as an example on that page:: path("M114 253").animate({path: "M114 253 L 234 253"}); But try to change code on that page, say, this way:: path("M114 26").animate({path: "M114 26 C 24 23 234 253 234 253"}); And you'll see what I mean. Path is certainly animated from it initial state (point "M114 26") to the end state (curve "C 24 23 234 253 234 253" starting on point "M114 26"), but not in a way specified in question, not like it's being drawn. (Sorry for not making clear from the start that I don't mean animating straight lines.) I don't see how animateAlong can do that either. It can animate an object along a path, and how can I make this path to gradually show itself while object is being animated along it?

    Read the article

  • Cannot delete from sys.tables

    - by Shimmy
    How can I perform this query on whatever way: delete from sys.tables where is_ms_shipped = 0 What happened is, I executed a very large query and I forgot to put USE directive on top of it, now I got a zillion tables on my master db, and don't want to delete them one by one. UPDATE: It's a brand new database, so I don't have to care about any previous data, the final result I want to achieve is to reset the master db to factory shipping.

    Read the article

  • Going Paperless

    - by Jesse
    One year ago I came to work for a company where the entire development team is 100% “remote”; we’re spread over 3 time zones and each of us works from home. This seems to be an increasingly popular way for people to work and there are many articles and blog posts out there enumerating the advantages and disadvantages of working this way. I had read a lot about telecommuting before accepting this job and felt as if I had a pretty decent idea of what I was getting into, but I’ve encountered a few things over the past year that I did not expect. Among the most surprising by-products of working from home for me has been a dramatic reduction in the amount of paper that I use on a weekly basis. Hoarding In The Workplace Prior to my current telecommute job I worked in what most would consider pretty traditional office environments. I sat in cubicles furnished with an enormous plastic(ish) modular desks, had a mediocre (at best) PC workstation, and had ready access to a seemingly endless supply of legal pads, pens, staplers and paper clips. The ready access to paper, countless conference room meetings, and abundance of available surface area on my desk and in drawers created a perfect storm for wasting paper. I brought a pad of paper with me to every meeting I ever attended, scrawled some brief notes, and then tore that sheet off to keep next to my keyboard to follow up on any needed action items. Once my immediate need for the notes was fulfilled, that sheet would get shuffled off into a corner of my desk or filed away in a drawer “just in case”. I would guess that for all of the notes that I ever filed away, I might have actually had to dig up and refer to 2% of them (and that’s probably being very generous). That said, on those rare occasions that I did have to dig something up from old notes, it was usually pretty important and I ended up being very glad that I saved them. It was only when I would leave a job or move desks that I would finally gather all those notes together and take them to shredding bin to be disposed of. When I left my last job the amount of paper I had accumulated over my three years there was absurd, and I knew coworkers who had substance-abuse caliber paper wasting addictions that made my bad habit look like nail-biting in comparison. A Product Of My Environment I always hated using all of this paper, but simply couldn’t bring myself to stop. It would look bad if I showed up to an important conference room meeting without a pad of paper. What if someone said something profound! Plus, everyone else always brought paper with them. If you saw someone walking down the hallway with a pad of paper in hand you knew they must be on their way to a conference room meeting. Some people even had fancy looking portfolio notebook sheaths that gave their legal pads all the prestige of a briefcase. No one ever worried about running out of fresh paper because there was an endless supply, and there certainly was no shortage of places to store and file used paper. In short, the traditional office was setup for using tons and tons of paper; it’s baked into the culture there. For that reason, it didn’t take long for me to kick the paper habit once I started working from home. In my home office, desk and drawer space are at a premium. I don’t have the budget (or the tolerance) for huge modular office furniture in my spare bedroom. I also no longer have access to a bottomless pit of office supplies stock piled in cabinets and closets. If I want to use some paper, I have to go out and buy it. Finally (and most importantly), all of the meetings that I have to attend these days are “virtual”. We use instant messaging, VOIP, video conferencing, and e-mail to communicate with each other. All I need to take notes during a meeting is my computer, which I happen to be sitting right in front of all day. I don’t have any hard numbers for this, but my gut feeling is that I actually take a lot more notes now than I ever did when I worked in an office. The big difference is I don’t have to use any paper to do so. This makes it far easier to keep important information safe and organized. The Right Tool For The Job When I first started working from home I tried to find a single application that would fill the gap left by the pen and paper that I always had at my desk when I worked in an office. Well, there are no silver bullets and I’ve evolved my approach over time to try and find the best tool for the job at hand. Here’s a quick summary of how I take notes and keep everything organized. Notepad++ – This is the first application I turn to when I feel like there’s some bit of information that I need to write down and save. I use Launchy, so opening Notepad++ and creating a new file only takes a few keystrokes. If I find that the information I’m trying to get down requires a more sophisticated application I escalate as needed. The Desktop – By default, I save every file or other bit of information to the desktop. Anyone who has ever had to fix their parents computer before knows that this is a dangerous game (any file my mother has ever worked on is saved directly to the desktop and rarely moves anywhere else). I agree that storing things on the desktop isn’t a great long term approach to keeping organized, which is why I treat my desktop a bit like my e-mail inbox. I strive to keep both empty (or as close to empty as I possibly can). If something is on my desktop, it means that it’s something relevant to a task or project that I’m currently working on. About once a week I take things that I’m not longer working on and put them into my ‘Notes’ folder. The ‘Notes’ Folder – As I work on a task, I tend to accumulate multiple files associated with that task. For example, I might have a bit of SQL that I’m working on to gather data for a new report, a quick C# method that I came up with but am not yet ready to commit to source control, a bulleted list of to-do items in a .txt file, etc. If the desktop starts to get too cluttered, I create a new sub-folder in my ‘Notes’ folder. Each sub-folder’s name is the current date followed by a brief description of the task or project. Then all files related to that task or project go into that sub folder. By using the date as the first part of the folder name, these folders are automatically sorted in reverse chronological order. This means that things I worked on recently will generally be near the top of the list. Using the built-in Windows search functionality I now have a pretty quick and easy way to try and find something that I worked on a week ago or six months ago. Dropbox – Dropbox is a free service that lets you store up to 2GB of files “in the cloud” and have those files synced to all of the different computers that you use. My ‘Notes’ folder lives in Dropbox, meaning that it’s contents are constantly backed up and are always available to me regardless of which computer I’m using. They also have a pretty decent iPhone application that lets you browse and view all of the files that you have stored there. The free 2GB edition is probably enough for just storing notes, but I also pay $99/year for the 50GB storage upgrade and keep all of my music, e-books, pictures, and documents in Dropbox. It’s a fantastic service and I highly recommend it. Evernote – I use Evernote mostly to organize information that I access on a fairly regular basis. For example, my Evernote account has a running grocery shopping list, recipes that my wife and I use a lot, and contact information for people I contact infrequently enough that I don’t want to keep them in my phone. I know some people that keep nearly everything in Evernote, but there’s something about it that I find a bit clunky, so I tend to use it sparingly. Google Tasks – One of my biggest paper wasting habits was keeping a running task-list next to my computer at work. Every morning I would sit down, look at my task list, cross off what was done and add new tasks that I thought of during my morning commute. This usually resulted in having to re-copy the task list onto a fresh sheet of paper when I was done. I still keep a running task list at my desk, but I’ve started using Google Tasks instead. This is a dead-simple web-based application for quickly adding, deleting, and organizing tasks in a simple checklist style. You can quickly move tasks up and down on the list (which I use for prioritizing), and even create sub-tasks for breaking down larger tasks into smaller pieces. Balsamiq Mockups – This is a simple and lightweight tool for creating drawings of user interfaces. It’s great for sketching out a new feature, brainstorm the layout of a interface, or even draw up a quick sequence diagram. I’m terrible at drawing, so Balsamiq Mockups not only lets me create sketches that other people can actually understand, but it’s also handy because you can upload a sketch to a common location for other team members to access. I can honestly say that using these tools (and having limited resources at home) have lead me to cut my paper usage down to virtually none. If I ever were to return to a traditional office workplace (hopefully never!) I’d try to employ as many of these applications and techniques as I could to keep paper usage low. I feel far less cluttered and far better organized now.

    Read the article

  • Transferring an SQL Processor License to a virtual hosted environment

    - by Andrew Shepherd
    My company is currently hosting a service in-house, and we want to move to an externally hosted environment. We would then be using a virtual server. I understand that this might be spread across multiple machines, but from my perspective as a customer, this layer is abstracted away - I shouldn't know or care about the hardware that the OS is hosted on. We have a licensed edition of SQL Server 2008. This is one Processor license. Will it be a violation of the licensing agreement to use this in a virtual environment. From the reference guide here it says When licensed Per Processor With Workgroup, Web, and Standard editions, for each server to which you have assigned the required number of per processor licenses, you may run, at any one time, any number of instances of the server software in physical and virtual operating system environments on the licensed server. However, the total number of physical and virtual processors used by those operating system environments cannot exceed the number of software licenses assigned to that server For enterprise edition there is an added option: if all physical processors in a machine have been licensed, then you may run unlimited instances of SQL server 2008 in one physical and an unlimited number of virtual operating environments on that same machine. I'm having trouble getting my head around this. Would I theoretically have to get a license for every processor in this virtual environment (which is effectively impossible because I have no way of knowing how many processors there actually are)? Or can I just say that it's hosted on one "virtual" server, so that's OK?

    Read the article

  • shibboleth: tomcat failing to start IdP listener

    - by HorusKol
    I have installed a Shibboleth Identity Provider as per http://www.edugate.ie/workshop-guides/shibboleth-2-identity-provider-installation-linux-debian-or-ubuntu However, testing only gave me a 404 from Tomcat, and when I checked the Tomcat logs, I saw that the IdP listener was not starting: 10/01/2011 11:25:31 AM org.apache.catalina.startup.HostConfig deployDescriptor INFO: Deploying configuration descriptor idp.xml 10/01/2011 11:25:32 AM org.apache.catalina.core.StandardContext start SEVERE: Error listenerStart 10/01/2011 11:25:32 AM org.apache.catalina.core.StandardContext start SEVERE: Context [/idp] startup failed due to previous errors The IdP descriptor file has the following context: <Context docBase="/opt/shibboleth-idp/war/idp.war" privileged="true" antiResourceLocking="false" antiJARLocking="false" unpackWAR="true" /> I have confirmed that the WAR file is located as the Context above specifies - as I have found similar issues from other people where the WAR file was not found. However, the logs posted by those people indicate that the descriptor file was correctly read by Tomcat and their problem was with the WAR file itself. I'm assuming this is some kind of syntax error with the idp.xml, but cannot determine what it might be. Also - setting the Tomcat logging level to FINEST does not provide any additional information in the logs for this error.

    Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >