Monthly Archives

Articles indexed in September 2012

Page 305/470 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

• serving mp3s to mobile devices is flooding nginx with partial requests

  - by drumfire

  I am serving mp3s with a minimalistic nginx server. What I see in my log files is that there are a lot of requests, in particular from AppleCoreMedia and sometimes Android useragents, that flood the server with short requests. Sometimes they keep requesting to download the same partial content for a very long time; sometimes more than an hour. For example: "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" [...] I also get a lot, but not as much, of these: "-" 400 0 "-" "-" 400 0 "-" The IP addresses are always from clients that start downloading shortly after that request, usually they have roughly the same UserAgent as in the first example. emphasized text I have enabled server throttling and connection limits in nginx to limit the huge amount of log entries from equivalent IPs at least somewhat. There was a performance issue when I saw the same behaviour on the previous server that used Apache. I installed nginx on a better server then moved the site. When Apache could not handle more connections from the increasing number of clients effectively that server was ddossed. There was no bandwidth issue with already connected clients and I don't know if the already connected clients were using more than one connection at a time. Please tell me: Are clients that appear to get stuck on a download a Bad Thing™ I heard people say their mobile bandwidth use was much higher than they could account for. I'm thinking this type of client behaviour can account for that. And costs us more bandwidth too. Which up to date alternatives exist out there that can handle serving this type of data better than plain HTTP? Useful general insights for someone who just came into this field straight out of the late 90s. :-)

  Read the article

• SSH: Port Forwarding, Firewalls, & Plesk

  - by Kian Mayne

  I edited my SSH configuration to accept connections on Port 213, as it was one of the few ports that my work firewall allows through. I then restarted sshd and everything was going well. I tested the ssh server locally, and checked the sshd service was listening on port 213; however, I still cannot get it to work outside of localhost. PuTTY gives a connection refused message, and some of the sites that allow check of ports I tried said the port was closed. To me, this is either firewall or port forwarding. But I've already added inbound and outbound exceptions for it. Is this a problem with my server host, or is there something I've missed? My full SSH config file, as requested: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 Port 213 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Measuring custom statistics with sar

  - by Will Glass

  I have a server application which I think is leaking file handles. I want to track the usage of file descriptors over time on my Linux (ubuntu) server. I've figured out that I can track the number of file descriptors in use by a process with lsof -p `pgrep the-process-name` | wc -l Since I'm already using sysstat and sar to track various metrics, I thought it'd be nice to display with sar. I want to measure this every 10 minutes. Is it possible to add a custom metric to sar? Then I can easily report it out. If not, I'll write a simple cron job to collect this data and store it separately in a log file.

  Read the article

• Mail server not sending or receiving after removal from barracuda blacklist to white list

  - by user137765

  Mail server not sending or receiving after removal from barracuda blacklist to white list. I've checked against black lists and the ip and domain are clean. 1and1 are saying its Barracuda black list and barracuda are saying its not blacklisted and that its somethign with 1and1 server. section from log file... Sep 20 04:29:25 vegaserve postfix/smtpd[16906]: connect from mta860.chtah.net[63.236.31.146] Sep 20 04:29:25 vegaserve postfix/smtpd[16070]: connect from host81-136-144-117.in-addr.btopenworld.com[81.136.144.117] Sep 20 04:29:27 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: raidon - short names not allowed from @ [201.80.253.153]ERR: 1348111767.185119 LOGOUT, [email protected], ip=[86.143.136.249], top=0, retr=0, time=151, rcvd=18, sent=283, maildir=/var/qmail/mailnames/mbelectrics.net/mb/Maildir Sep 20 04:29:28 vegaserve pop3d: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:28 vegaserve postfix/smtpd[15388]: connect from mta965.emails.itv.com[8.30.201.55] Sep 20 04:29:29 vegaserve postfix/smtpd[18194]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:29 vegaserve postfix/cleanup[24879]: 95CB31E87556C: message-id=<[email protected] Sep 20 04:29:29 vegaserve postfix/qmgr[14378]: 95CB31E87556C: from=, size=975, nrcpt=1 (queue active) Sep 20 04:29:29 vegaserve postfix/smtpd[18194]: disconnect from uspmta172097.emarsys.net[195.54.172.97] Sep 20 04:29:29 vegaserve postfix/smtp[25748]: 95CB31E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.05/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:29 vegaserve postfix/bounce[25897]: warning: 95CB31E87556C: undeliverable postmaster notification discarded Sep 20 04:29:29 vegaserve postfix/qmgr[14378]: 95CB31E87556C: removed Sep 20 04:29:32 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:37 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rei - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:38 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:38 vegaserve postfix/smtpd[19328]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/smtpd[18331]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/smtpd[24464]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/cleanup[24825]: BD1A71E87556C: message-id=<[email protected] Sep 20 04:29:40 vegaserve postfix/qmgr[14378]: BD1A71E87556C: from=, size=673, nrcpt=1 (queue active) Sep 20 04:29:40 vegaserve postfix/smtpd[24464]: disconnect from unknown[118.97.212.190] Sep 20 04:29:40 vegaserve postfix/smtp[25748]: BD1A71E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:40 vegaserve postfix/bounce[25995]: warning: BD1A71E87556C: undeliverable postmaster notification discarded Sep 20 04:29:40 vegaserve postfix/qmgr[14378]: BD1A71E87556C: removed Sep 20 04:29:41 vegaserve postfix/cleanup[24879]: 0A42B1E87556C: message-id=<[email protected] Sep 20 04:29:41 vegaserve postfix/qmgr[14378]: 0A42B1E87556C: from=, size=961, nrcpt=1 (queue active) Sep 20 04:29:41 vegaserve postfix/smtpd[18331]: disconnect from bay0-omc4-s10.bay0.hotmail.com[65.54.190.212] Sep 20 04:29:41 vegaserve postfix/smtp[25748]: 0A42B1E87556C: to=, orig_to=, relay=none, delay=0.03, delays=0.03/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:41 vegaserve postfix/bounce[25897]: warning: 0A42B1E87556C: undeliverable postmaster notification discarded Sep 20 04:29:41 vegaserve postfix/qmgr[14378]: 0A42B1E87556C: removed Sep 20 04:29:43 vegaserve postfix/smtpd[17511]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:43 vegaserve postfix/cleanup[24825]: 8F8991E87556C: message-id=<[email protected] Sep 20 04:29:43 vegaserve postfix/qmgr[14378]: 8F8991E87556C: from=, size=946, nrcpt=1 (queue active) Sep 20 04:29:43 vegaserve postfix/smtpd[17511]: disconnect from blu0-omc4-s22.blu0.hotmail.com[65.55.111.161] Sep 20 04:29:43 vegaserve postfix/smtp[25748]: 8F8991E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.02/0/0.02/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:43 vegaserve postfix/bounce[25995]: warning: 8F8991E87556C: undeliverable postmaster notification discarded Sep 20 04:29:43 vegaserve postfix/qmgr[14378]: 8F8991E87556C: removed Sep 20 04:29:44 vegaserve postfix/cleanup[24879]: 088641E87556C: message-id=<[email protected] Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 088641E87556C: from=, size=1078, nrcpt=1 (queue active) Sep 20 04:29:44 vegaserve postfix/smtpd[19328]: disconnect from smtp10.bis7.eu.blackberry.com[178.239.85.15] Sep 20 04:29:44 vegaserve postfix/smtp[25748]: 088641E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.03/0/0.01/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:44 vegaserve postfix/bounce[25995]: warning: 088641E87556C: undeliverable postmaster notification discarded Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 088641E87556C: removed Sep 20 04:29:44 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rin - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:44 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:44 vegaserve postfix/smtpd[18965]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:44 vegaserve postfix/cleanup[24825]: 946F51E87556C: message-id=<[email protected] Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 946F51E87556C: from=, size=1173, nrcpt=1 (queue active) Sep 20 04:29:44 vegaserve postfix/smtpd[18965]: disconnect from hubrelay-rd.bt.com[62.239.224.99] Sep 20 04:29:44 vegaserve postfix/smtp[25748]: 946F51E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:44 vegaserve postfix/bounce[25897]: warning: 946F51E87556C: undeliverable postmaster notification discarded Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 946F51E87556C: removed Sep 20 04:29:45 vegaserve postfix/smtpd[14816]: connect from col0-omc2-s12.col0.hotmail.com[65.55.34.86] Sep 20 04:29:47 vegaserve postfix/smtpd[16900]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:47 vegaserve postfix/cleanup[24879]: 961721E87556C: message-id=<[email protected] Sep 20 04:29:47 vegaserve postfix/qmgr[14378]: 961721E87556C: from=, size=1082, nrcpt=1 (queue active) Sep 20 04:29:47 vegaserve postfix/smtpd[16900]: disconnect from mta-35d2.livingsocial.com[199.91.53.210] Sep 20 04:29:47 vegaserve postfix/smtp[25748]: 961721E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:47 vegaserve postfix/bounce[25995]: warning: 961721E87556C: undeliverable postmaster notification discarded Sep 20 04:29:47 vegaserve postfix/qmgr[14378]: 961721E87556C: removed Sep 20 04:29:50 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rini - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:50 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:52 vegaserve postfix/smtpd[24478]: connect from col0-omc2-s13.col0.hotmail.com[65.55.34.87] Sep 20 04:29:52 vegaserve postfix/smtpd[18923]: connect from www.idbwplan.com[193.181.254.21] Sep 20 04:29:55 vegaserve postfix/smtpd[15968]: connect from 105-48.mta.dotmailer.com[94.143.105.48] Sep 20 04:29:56 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: ringo - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:56 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:30:00 vegaserve postfix/smtpd[18772]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:30:01 vegaserve postfix/cleanup[24825]: 1DAD71E87556C: message-id=<[email protected] Sep 20 04:30:01 vegaserve postfix/qmgr[14378]: 1DAD71E87556C: from=, size=1022, nrcpt=1 (queue active) Sep 20 04:30:01 vegaserve postfix/smtpd[18772]: disconnect from mail95.us2.mcsv.net[173.231.139.95] Sep 20 04:30:01 vegaserve postfix/smtp[25748]: 1DAD71E87556C: to=, orig_to=, relay=none, delay=0.06, delays=0.05/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:30:01 vegaserve postfix/bounce[25897]: warning: 1DAD71E87556C: undeliverable postmaster notification discarded Sep 20 04:30:01 vegaserve postfix/qmgr[14378]: 1DAD71E87556C: removed Sep 20 04:30:02 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: ritsuko - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:30:02 vegaserve postfix/smtpd[16911]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:30:02 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:30:02 vegaserve postfix/cleanup[24879]: 8AADD1E87556C: message-id=<[email protected] Sep 20 04:30:02 vegaserve postfix/qmgr[14378]: 8AADD1E87556C: from=, size=1003, nrcpt=1 (queue active) Sep 20 04:30:02 vegaserve postfix/smtpd[16911]: disconnect from mr133.createsend.com[184.106.86.133] Sep 20 04:30:02 vegaserve postfix/smtp[25748]: 8AADD1E87556C: to=, orig_to=, relay=none, delay=0.02, delays=0.02/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself)

  Read the article

• IPtables and Remote Desktop with Proxy

  - by Sebastian

  So I setup a windows 2008 web server R2 on VirtualBox. Currently using Bridged Network. I can remote desktop to the machine hosting the VM (10.0.0.183) but cannot remote desktop to the VM itself (10.0.0.195). The remote port on the VM set to 5003. VM setup to accept remote connections (windows side). We also use a proxy for our internet, and I added these rules under NAT. (centOS 5) on our proxy box. -A INPUT -p tcp --dport 3389 -j ACCEPT -A REROUTING -i ppp0 -p tcp --dport 3389 -j REDIRECT --to-port 5003 -A FORWARD -d 10.0.0.195 --dport 5003 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I've been trying for hours and hours and just cannot get it to work. I also used freedns so that we can use a domain name to connect too this VM over the internet. (the DNS points to our external IP address). If we don't get this right we will have to purchase a PPoE from an ISP to connect to this VM remotely, but I know that there is an alternative route if I can just get this port forwarding right!

  Read the article

• How to securely control access to a backend key server?

  - by andy

  I need to securely encrypt data in my database so that if the database is dumped, hackers are unable to decrypt the data. I'm planning on creating a simple key server on a different machine, and allowing the DB server access to it (restricted by IP address on the key server to permit the DB server). The key server would contain the key required to encrypt/decrypt data. However, if a hacker were able to get a shell on the DB server, they could request the key from the key server and therefore decrypt the data in the database. How could I prevent this (assuming all firewalls are in place, DB is not connected directly to the internet, etc)? i.e. is there some method I could use that could secure a request from the DB server to the key server so that even if a hacker had a shell on the DB server they'd be unable to make those same requests? Signed requests from the DB server could make issuing these requests less trivial - I suppose that'd help increase the amount of time it'd take to compromise the key server, something a hacker probably wouldn't have much of. As far as I can see, if someone can get a shell on the DB server everything's lost anyway. This could be mitigated by using one key per data item in the DB so at least there's not a single "master" key, but multiple keys that the hacker would need to access. What would be a secure method of ensuring requests from the DB server to the key server were authentic and could be trusted?

  Read the article

• Set postfix to send email but not to receive them

  - by CodeShining

  I'm using Google Apps to handle personal email addresses for my domain name, and I set up the DNS as Google suggests. All works fine. Now since I need a SMTP to send emails from my e-commerce I installed Postfix on the server. It works fine when I send emails to any email address but it doesn't send to the same domain name, so let's say my domain is example.com, I set postfix using example.com, if I try to reset a password using [email protected] postfix doesn't send and instead reports on the mail.log Sep 20 01:09:52 ip-10-54-26-162 postfix/pickup[6809]: B09A3415D8: uid=33 from=<www-data> Sep 20 01:09:52 ip-10-54-26-162 postfix/cleanup[6854]: B09A3415D8: message-id=<20120920010952.B09A3415D8@ip-10-54-26-162.eu-west-1.compute.internal> Sep 20 01:09:52 ip-10-54-26-162 postfix/qmgr[30978]: B09A3415D8: from=<[email protected]>, size=4234, nrcpt=1 (queue active) Sep 20 01:09:52 ip-10-54-26-162 postfix/local[6856]: B09A3415D8: to=<[email protected]>, relay=local, delay=0.01, delays=0.01/0/0/0, dsn=5.1.1, status=bounced (unknown user: "myaccount") Of course it cannot find a local user "myaccount" since that account is on Google Apps... How can I tell Postfix to send the email and do not search for a local user?

  Read the article

• Linux RAID0 - relocating member disk

  - by qdot

  I've got an issue I would rather handle with the array online - I am using RAID0 for temporary video storage - data that is low-cost to restore, but that is used frequently. The software array looks like this: md1 : active raid0 sdb1[2] sdc1[3] sdd1[0] sde1[1] 1953487616 blocks 64k chunks I have another partition (sda1) in this system, that I want to use to replace sdc1 (The drives are of varying age, and sdc1 is definitely the slowest one, limiting the entire array's sequential read performance to only 300MB/s). Is there a way to migrate the data from sdc1 to sda1 while the array is still online?

  Read the article

• Use a RAID Controller without drivers?

  - by cian1500ww

  Ordered an Adaptec 1420SA RAID card for my Debian Squeeze media server but didn't check to see if it was compatible, turns out it's not because it uses something called hostRAID which requires special drivers that aren't available for Debian. Could I still use the card as an ordinary controller and just use OS software RAID?? I'm not looking for speed, just need to mirror some drives that will be used for storage, the OS will reside on a disk connected to the server's onboard controller so the system won't be booting from any drives on the Adaptec controller.

  Read the article

• Windows Server (SBS) 2008 - Telephony service won't start (missing permissions)

  - by Uri

  I am running a SBS 2008 server. It's setup as the domain controller for the network. After a reboot, the Telephony service (and all services that depend on it) refuses to start under the Network Service account. The error given is: Error 1297: A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration. This has caused all the network services not to be accessible e.g. terminal services, VPN (RRAS), SQL Server instances. The SSH daemon I have running on the box will accept connections only from localhost, but won't respond on the network. After searching around, the only advice I could find was to grant the Network Service account these permissions: Adjust memory quotas for a process Replace a process level token I set those permissions on both the Default Domain Policy and the Default Domain Controller Policy, but it seemingly had no effect. Most of the services will start if I change them to run under the Local System account, but that didn't make them accessible on the network. I even tried removing the Routing and Remote Access Services feature, rebooting and reinstalling it, but the issue remains. Any ideas?

  Read the article

• mkfs Operation Takes Very Long on Linux Software Raid 5

  - by Elmar Weber

  I've set-up a Linux software raid level 5 consisting of 4 * 2 TB disks. The disk array was created with a 64k stripe size and no other configuration parameters. After the initial rebuild I tried to create a filesystem and this step takes very long (about half an hour or more). I tried to create an xfs and ext3 filesystem, both took a long time, with mkfs.ext3 I observed the following behaviour, which might be helpful: writing inode tables runs fast until it reaches 1053 (~ 1 second), then it writes about 50, waits for two seconds, then the next 50 are written (according to the console display) when I try to cancel the operation with Control+C it hangs for half a minute before it is really canceled The performance of the disks individually is very good, I've run bonnie++ on each one separately with write / read values of around 95 / 110MB/s. Even when I run bonnie++ on every drive in parallel the values are only reduced by about 10 MB. So I'm excluding hardware / I/O scheduling in general as a problem source. I tried different configuration parameters for stripe_cache_size and readahead size without success, but I don't think they are that relevant for the file system creation operation. The server details: Linux server 2.6.35-27-generic #48-Ubuntu SMP x86_64 GNU/Linux mdadm - v2.6.7.1 Does anyone has a suggestion on how to further debug this?

  Read the article

• Will Software RAID And iSCSI Work For A SAN

  - by Justin

  I am looking for a SAN solution, but can't afford even entry level solutions. Basically, the SAN is for development and a proof of concept product. The performance doesn't have to be amazing, but needs to be functional. My buddy says we should just setup sotware RAID and software iSCSI in Linux. Essentially I have a spare server with dual Xeon processors, 4GB of memory, and (2) 500GB 7200RPM drives. It's a bit old but working. I am sure there is reason people don't do software RAID and iSCSI, but will performance be usable? Thinking of configuring the drives in RAID 0 (for performance).

  Read the article

• Cisco "copy startup-config tftp" results in a 0 byte file on the server?

  - by Geoffrey

  I'm pulling my hair out figuring this out. My startup-config is good, I can view it with a show command. I'm trying to copy it to a tftp server: asa5505# copy startup-config tftp Address or name of remote host []? ipaddress Destination filename [startup-config]? t !! %Error writing tftp://ipaddress/t (Timed out attempting to connect) On my TFTP server (SolarWinds), I get the following: binary, PUT. Started file name: C:\TFTP-Root\t binary, PUT. File Exists, C:\TFTP-Root\t binary, PUT. Deleting Existing File. binary, PUT. Interrupted by client, cause: The process cannot access the file 'C:\TFTP-Root\t' because it is being used by another process I've used tftpd32 with same results. I've tried different servers, even one on the same network as the asa ... same results. It'll create a 0 byte file and never do the dump. What's going on? Everything is working normally except for this.

  Read the article

• Recommended Win2k8 Server software to fix my RAID-0 issue

  - by Jason Kealey

  I'm running an Asus P6T V2 Deluxe. It has six SATA ports and supports onboard RAID. I am using two of those ports for a RAID0 array of 1.5TB Seagate drives using the onboard RAID controller. One of them is giving me SMART warnings and I want to preemptively replace it. I pulled out two other 1.5TB drives from another computer and am ready to use one or both, if necessary. I can't run any SMART diagnostic software from within Windows because it only sees the hardware RAID-0 array, not each individual drive. The first thing I tried was a slow sector-by-sector copy using a free tool called EASEUS Disk Copy. Used the bootdisk, copied (took like 16 hours), unplugged the defective drive and plugged the new one in its place. The motherboard didn't recognize the new drive as being part of the known setup, so it did not want to boot. The second thing I tried was using other software (I forget the name) to copy the partition from within Windows. The first software failed because I had a server operating system. I found another software (I forget the name) which supported a server OS and did a partition copy onto the new drive. This seemed to work and the OS started to boot, but blue screened and started a reboot cycle. I'm assuming the software I was using was no good as it was trying to copy the boot disk while it was in use. I am looking for recommendations on what software to use to fix my problem without doing a re-install. Everything is backed up but my computer works fine and I'd like to avoid re-installation when possible. However, my system would be back up now if I had just started over on a second RAID array. :)

  Read the article

• slow software raid

  - by Jure1873

  I've got software raid 1 for / and /home and it seems I'm not getting the right speed out of it. Reading from md0 I get around 100 MB/sec Reading from sda or sdb I get around 95-105 MB/sec I thought I would get more speed (while reading data) from two drives. I don't know what is the problem. I'm using kernel 2.6.31-18 hdparm -tT /dev/md0 /dev/md0: Timing cached reads: 2078 MB in 2.00 seconds = 1039.72 MB/sec Timing buffered disk reads: 304 MB in 3.01 seconds = 100.96 MB/sec hdparm -tT /dev/sda /dev/sda: Timing cached reads: 2084 MB in 2.00 seconds = 1041.93 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.77 MB/sec hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 2150 MB in 2.00 seconds = 1075.94 MB/sec Timing buffered disk reads: 302 MB in 3.01 seconds = 100.47 MB/sec Edit: Raid 1

  Read the article

• How do I permanently disable Linux's console screen saver, system-wide?

  - by raldi

  I've got an Ubuntu server that boots up in text mode. It rarely has a screen or keyboard attached to it, but when I do attach a screen, I usually have to attach a keyboard too, because the darn console mode screen saver will be on and I'll need to hit a key to see what's going on. I'm aware that the setterm command can disable this, but it's a per-session thing. How can I make it so the machine never ever blanks the screen in text mode, even when it's first booted up and sitting at the login prompt?

  Read the article

• Growing a Linux software RAID5 array

  - by chrismetcalf

  On my home file server, I've got a 1.5TB software RAID5 array, built from four 500gb Western Digital drives. I've got a fifth drive that I usually run as a hot spare (but have out of the array at the moment), but if I can I'd like to add that to the array and grow it to 2TB since I'm running out of space. I Googled for guidance, but there seem to be a lot of differing opinions out there (many of them probably now out-of-date) as to whether or not that is possible and/or smart. What's the right way to go about this, or should I start looking into building a new array with more space? Version details: %> cat /etc/issue Debian GNU/Linux 5.0 \n \l %> uname -a Linux magrathea 2.6.26-1-686-bigmem #1 SMP Sat Jan 10 19:13:22 UTC 2009 i686 GNU/Linux %> /sbin/mdadm --version mdadm - v2.6.7.2 - 14th November 2008 %> cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] md1 : active raid1 hdc1[0] hdd1[1] 293033536 blocks [2/2] [UU] md0 : active raid5 sde1[3] sda1[0] sdc1[2] sdb1[1] 1465151808 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU]

  Read the article

• Get LDAP Information For University Email. For Thunderbird

  - by Dhruvenkumar Shah

  I am a Student at Northeastern University. They use G-Apps for email ids, so whenever I need to email someone, using university Id which ends with husky.neu.edu. I have to go Gmails compose mail, They have some LDAP Setting by which I get all the email ids using AJAX in "To" as soon as I start typing. I want to configure same in Thunderbird, I contacted university but they are not able to help me. Is it possible that on my G-Apps Gmail Settings those LDAP Parameter needed for configuration are presents? Can anyone help me? I want to configure a directory reference in my email client thunderbird, I dont know the parameters to use, it is possible I can get it somehow?

  Read the article

• Is there a way to have a working search bar in Explorer with Windows Search Service disabled?

  - by Desmond Hume

  I had to disable Windows Search Service (turn it off in Windows Features) for the reason that it was constantly using the hard drive in an excessive way (maybe because I've got very large quantities of files on my PC), noticeably slowing down my computer, and the Windows.edb database file grew way too large, about 2.5 GB in size. But the side-effect of it is that now the search bar is gone from any Explorer window and I miss this useful feature. So my question is, is there a way to stop Windows Search Service torturing my hard drive and still being able to search for files and folders directly from Explorer, perhaps using some third-party software?

  Read the article

• unable to access shared drives n win7

  - by colin

  OK, this is doing my head in. Not your usual Win7 sharing problem. Just built a win 7 comp to go onto my home lan and be accessed by all on the network, mostly running XP SP3. Installed it as a single HD+DVD system, got it happy, then added my storage drives, set them up in the right order and letters, rebooted, and shared them. Couldn't access the computer at all from any XP machine. Set the pasword thingy in win7 to NO, and now I can "see" all four shared drives from any machine, but can access only two of them. Please tell me whats going on as I've done nothing different from one drive to the other, just installed and set up drive letters as normal, then shared the damn things. The odd thing about it? the two 1.5T drives that have a lot of data on board are accessable, the two nearly empty 500G ones are not. ANY ideas? Cheers, Colin

  Read the article

• Remote Assist Windows 2008 R2 Session

  - by cbergman

  As mentioned in this kb article, it is not possible to shadow a session with multiple monitors enabled. It does mention that "Remote Assistance supports multiple monitors, and is the presently recommended solution if you need this functionality." My question is, is it possible (and if so, how) to remote assist a terminal services session. We have a few Windows Server 2008 R2 Terminal Servers running with about 10 or so users that use 2 monitors. It would be ideal to be able to remote into their session but have yet to find a viable solution. Thank you.

  Read the article

• No Other User In Task Manager Users Tab Windows 7

  - by Samuel Adam

  I want to ask why there is only me on Task Manager's Users tab. Originally I wanted to be able to chat with other clients on my local network using msg command, but I can't found any other user. How to see other users on the same network? I use Work Network, and all of the users is using wifi to connect. I googled about it, but no information is close enough. As much as a newbie question it sounded, I really appreciate any help. Thank you ! :)

  Read the article

• How can I have a Windows 7 VMware guest without mouse support?

  - by Matthew Read

  Despite having vmmouse.present = "FALSE" mouse.vusb.absDisabled = "TRUE" pref.motionUngrab = "FALSE" in my .vmx file and a customized VMware Tools installation on the guest that does not include the mouse driver, I somehow have fully integrated mouse support for my Windows 7 VM. I can smoothly mouse from the host into the guest without needing to click or Ctrl+G in and Ctrl+Alt out. I don't want this because of the issues it causes with games. How can I get the VM to have no special mouse support while still having VMware Tools installed for its other functions (network, graphics, etc.)? The mouse works as I want without VMware Tools but not otherwise — again, despite not installing the mouse driver and having all those settings trying to disable it. Device Manager shows that the generic Windows PS/2 mouse driver is being used and not the virtual mouse driver. Guest and host are both Windows 7 Ultimate SP1, x86 and x64 respectively. I'm using VMware Player 3.1.4 and the VMware Tools installed is the latest, 8.4.6.16648.

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• How to set the IP address in a customized OpenWRT compilation

  - by Berdus

  I have been struggling today customizing OpenWRT. I checkout the stable using SVN, "make menuconfig" to customize the image, "make" it and run it on a router. Almost all my modifications work, except for the (Seemingly trivial) task of changing the default 192.168.1.1 address. I tried numerous files (scripts as well as config files) but I can't seem to change it (I can change it for a brief moment after boot using the "preinit" file, but after a few seconds it reverts to default). I suspect I should be setting it in the /etc/network file, but modifications there seem to be overwritten during boot. Maybe it has something to do with the br-lan interface? Does anybody have some thoughts on the subject? Thanks!

  Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >