Monthly Archives

Articles indexed in November 2012

Page 330/450 | < Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >

• installing windows XP in Samsung SENS 145 plus notebook (no CD drive)

  - by user13267

  Hi I was trying to install Windows XP in a Samsung SENS 145 plus Notebook. It does not have a cd drive and I already managed to format it and semi install Windows XP, so now it does not even boot up either. This is what I did: Since it supports USB booting, I first made a bootable USB of Windows XP (Korean version; SP2 I think, may be SP 3) using Novicorp WinToFlash enter link description here. It managed to boot up at first and I was able to format the C driveand get Windows install to start up. It took forever to copy all the files from the USB and after the first reboot, before installation started, I cancelled the reboot from windows install, went to BIOS and changed the boot device priority from USB to internal hard drive. But now on bootup it showed me a list with two options for booting windows XP (much like in the case of a multi OS system) so I assumed that I had formatted drive D by mistake and installed XP there, instead of on C drive. Anyway, I chose one of them and it continued my Windows installation. I got the blue installation screen that shows ads about Windows XP on the right frame and estimated remaining time on the left. However, after completing the process, after the first reboot, instead of showing the Windows XP logo, it says \system32\hall.dll is missing (or corrupted I'm not sure, I needed to install the Korean version of windows and I could not exactly read the error message, however it was one that I have already seen in an English version installation, and I am sure it says either missing or corrupted). The problem is, now it shows the same error again when I try to reboot it from the USB drive as well. I tried to boot a portable version of Linux I made in another USB, but the computer does not boot up from that USB, and it shows hal.dll error when I try to boot it using the WIN XP installation USB I made, as well as when I try to boot it from the hard drive, where I suppose Win XP is now semiinstalled. So now I can't get the computer to start up at all, except going to the BIOS. What else can I try to solve this? Also, would it be possible to install XP on this computer by connecting it to another one running Windows 7 ultimate, through the ethernet card? That is, network just the two computers together, then install windows XP on the notebook from the desktop running windows 7? Please help, I'm running out of ideas on this one. If Korean version of windows XP is the problem then I am willing to install English version as well. (but I need to make sure if that is the real cause of the problem)

  Read the article

• Which app has a notification sound with 3 descending notes?

  - by Eric

  Brand new Windows 7 box loaded with the usual dev tools -- VS2008, Firefox, Chatzilla, Thunderbird, emacs, Pidgin, Putty, iTunes, SharpReader. Every couple of minutes, I get an audio notification consisting of three rising notes, maybe a middle-C-G-F on a piano (I don't have a piano handy, and don't have time to use GarageBand to try to figure it out). Nothing in the notification bar is flashing when this happens. The sound isn't in any of the Windows Sound control panel applets. And it's not in C:\Windows\Media, so it's most likely coming from a non-Microsoft app. Any chance it's Pidgin when the status one of my contact's changes (which happens plenty frequently)? Oh, look at this --- Tools/Mute Sounds. Let's try that and see what happens... Is this familiar to anyone?

  Read the article

• How to delete Chrome temp data (history, cookies, cache) using command line

  - by Dio Phung

  On Windows 7, I tried running this script but still cannot clear Chrome temp data. Can someone figure out what's wrong with the script? Where do Chrome store history and cache ? Thanks ECHO -------------------------------------- ECHO **** Clearing Chrome cache taskkill /F /IM "chrome.exe">nul 2>&1 set ChromeDataDir=C:\Users\%USERNAME%\AppData\Local\Google\Chrome\User Data\Default set ChromeCache=%ChromeDataDir%\Cache>nul 2>&1 del /q /s /f "%ChromeCache%\*.*">nul 2>&1 del /q /f "%ChromeDataDir%\*Cookies*.*">nul 2>&1 del /q /f "%ChromeDataDir%\*History*.*">nul 2>&1 set ChromeDataDir=C:\Users\%USERNAME%\Local Settings\Application Data\Google\Chrome\User Data\Default set ChromeCache=%ChromeDataDir%\Cache>nul 2>&1 del /q /s /f "%ChromeCache%\*.*">nul 2>&1 del /q /f "%ChromeDataDir%\*Cookies*.*">nul 2>&1 del /q /f "%ChromeDataDir%\*History*.*">nul 2>&1 ECHO **** Clearing Chrome cache DONE

  Read the article

• Correcting owner/permissions on damaged directory tree in linux

  - by mcs130

  I inadvertently made a backup copy of a directory recursively and forgot the -a (--preserve) switch when doing so. This damaged my backup directory (which contains data we need to access). The directory and all of its child folders and files comprise an installation of an application including postgress DB and solr files. The original copy was used to for a failed re-config attempt. Now I need to use the backup copy to start over, only the ownership of the backup copy is now root across everything and it is no longer usable (processes won't run due to ownership problems I created when I forgot the -a on the cp -r). I've re-installed a clean copy of the application into a 3rd location now (which has the correct owner/perms) and need to copy the owner/perms from this good directory over onto the damaged directory. What is the best way (if even possible) to do this. (I've Googled and seen things from perl scripting to setfacl/getfacl to do this but am unfortunately still confused). Apologies if this seems a dumb question. Thanks.

  Read the article

• Can't type into some text fields in any browser on Windows 7

  - by Zoltán

  I can't type into e.g. facebook's log in form with my computer. I hit my keys, but nothing happens. Special characters like c, c, š, etc. work. Backspace doesn't, delete does. This goes for Internet Explorer, Firefox and Chrome. This also happens with some other sites, sometimes even with gmail (or any google's log in form). I read somewhere that the solution is to reregister some dlls: regsvr32 mshtmled.dll regsvr32 jscript.dll regsvr32 /i mshtml.dll The first two work, the third one says The module "mshtml.dll" was loaded but the entry-point DllRegisterServer.dll was not found. And of course, running just the first two didn't help. Does anyone know how to fix this problem?

  Read the article

• GNU Emacs is crashing with -nw

  - by Jack

  When I run emacs with -nw option, the emacs really open, but I can't do more nothing. As if the user input is blocked and no keyboard signal is received and/or interpreted. I've tried run without load .emacs file and some other behaviors: emacs -nw -Q --no-desktop --debug-ini foo.c But makes no difference and strangely the GUI-version(using Gtk) is working fine. My gnu-emacs version is GNU Emacs 23.3.1 Any help to help to fix it is very appreciated.

  Read the article

• How can I wipe my iPod classic and fix any bad sectors on the hard drive without killing it?

  - by Sam Meldrum

  My iPod never finishes syncing and only syncs audio, not pictures or video. Any ideas as to how I can fix it? My iPod classic 160GB worked well for a couple of years. I used to sync a lot of photos at full resolution to it, but this recently stopped working after I moved to Windows 7. iTunes is on latest version - 9.1.1.12 iPod software is up to date - 1.1.2 Windows 7 is fully up to date and patched The symptoms are that the iPod will start to sync, all audio (music and podcasts will sync successfully) but the syncing will then just appear to continue - itunes message: Syncing iPod. Do not Disconnect. This sync never completes - I have left it trying for days. I have tried resetting the iPod using the Restore button, whereupon it restarts sync from default options and again will sync audio, but nothing else. I suspect that something has gone wrong on the hard-drive - either a bad sector or some corrupt data. Is there a process I can go through to fix this? E.g. SpinRite or a format? If so how do I go about formatting an iPod and will it be recognised as an iPod after format and work as normal? Any advice on what to try next much appreciated? Update I have eliminated problems with the files, PC or iTunes as they sync fine to other iPods. I have also eliminated the cable by trying different cables which work with other iPods. What I'd really like to know is if there is any way to more fundamentally wipe the iPod safely, attempt to repair any bad sectors on the hard drive and then start from scratch. Anyone ever managed this?

  Read the article

• SQLAuthority News – Android Efficiency Tips and Tricks – Personal Technology Tip #003

  - by pinaldave

  I use my phone for lots of things.  I use it mainly to replace my tablet – I can e-mail, take and edit photos, and do almost everything I can do on a laptop with this phone.  And I am sure that there are many of you out there just like me.  I personally have a Galaxy S3, which uses the Android operating system, and I have decided to feature it as the third installment of my Technology Tips and Tricks series. 1) Shortcut to your favorite contacts on home screen Access your most-called contacts easily from your home screen by holding your finger on any empty spot on the home screen.  A menu will pop up that allows you to choose Shortcuts, and Contact.  You can scroll through your contact list and then just tap on the name of the person you want to be able to dial with a single click. 2) Keep track of your data usage Yes, we all should keep a close eye on our data usage, because it is very easy to go over our limits and then end up with a giant bill at the end of the month.  Never get surprised when you open that mobile phone envelope again.  Go to Settings, then Data Usage, and you can find a quick rundown of your usage, how much data each app uses, and you can even set alarms to let you know when you are nearing the limits.   Better yet, you can set the phone to stop using data when it reaches a certain limit. 3) Bring back Good Grammar We often hear proclamations about the downfall of written language, and how texting abbreviations, misspellings, and lack of punctuation are the root of all evil.  Well, we can show all those doomsdayers that all is not lost by bringing punctuation back to texting.  Usually we leave it off when we text because it takes too long to get to the screen with all the punctuation options.  But now you can hold down the period (or “full stop”) button and a list of all the commonly-used punctuation marks will pop right up. 4) Apps, Apps, Apps and Apps And finally, I cannot end an article about smart phones without including a list of my favorite apps.  Here are a list of my Top 10 Applications on my Android (not counting social media apps). Advanced Task Killer – Keeps my phone snappy by closing un-necessary apps WhatsApp - my favorite alternate to Text SMS Flipboard - my ‘timepass’ moments Skype – keeps me close to friends and family GoogleMaps - I am never lost because of this one thing Amazon Kindle – Books my best friends DropBox - My data always safe Pluralsight Player – Learning never stops for me Samsung Kies Air – Connecting Phone to Computer Chrome – Replacing default browser I have not included any social media applications in the above list, but you can be sure that I am linked to Twitter, Facebook, Google+, LinkedIn, and YouTube. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Android, Personal Technology

  Read the article

• Oracle DB, Oracle ADF, GlassFish, JDeveloper, NetBeans IDE

  - by Geertjan

  Today I started some experiments with Oracle guru Steven Davelaar, who lives about 20 minutes away from my place in Amsterdam by underground. Very convenient. He showed me a bunch of things in JDeveloper, while I showed him a bunch of things in NetBeans IDE. He managed to deploy an ADF application to GlassFish in JDeveloper. And, so far, I failed to do the same thing in NetBeans IDE. Quite a few (around 100) JARs are needed, aside from the question of correctly setting up or importing an ADF application, and we're still figuring out which and who and when and where. And how. And if. And why. Nonetheless, I did manage to get Oracle DB set up in NetBeans IDE, after downloading it from here: http://www.oracle.com/technetwork/products/express-edition/downloads/index.html Here's what it looks like when registered in NetBeans IDE, i.e., notice that I have a cool sample database available:   Data from the above database I managed to display very easily via the various NetBeans code generators in a PrimeFaces application, exactly as has been done many times in demonstrations and tutorials everywhere, i.e., generate JPA entities, then create an EJB, then inject the EJB into a PrimeFaces data table: The next step is to somehow do the same with ADF in NetBeans IDE. I had some trouble with passwords for Oracle DB, the command line (with Steven's help) proved helpful: Wish us luck as we continue our ADF-inspired journey. This blog entry by Shay is also relevant: Deploying Oracle ADF Essentials Applications to Glassfish

  Read the article

• How to plan/manage multi-platform (mobile) products?

  - by PhD

  Say I've to develop an app that runs on iOS, Android and Windows 8 Mobile. Now all three platforms are technically in different program languages. The only 'reuse' that I can see is that of the boxes-and-lines drawings (UML :) charts and nothing else. So how do companies/programmers manage the variation of the same product across different platforms especially since the implementation languages differ? It's 'easier' in the desktop world IMO given the plethora of languages and cross-platform libraries to make your life easier. Not so in the mobile world. More so, product line management principles don't seem to be all that applicable - what is same and variant doesn't really matter - the application is the same (conceptually) and the implementation is variant. Some difficulties that come to mind: Bug Fixing: Applications maybe designed in a similar manner but the bug identification and fixing would be radically different. A bug on iOS may/may-not be existent for that on Android. Or a bug fix approach on one platform may not be the same on another (unless it's a semantic bug like a!=b instead of a==b which would require the same 'approach' to fixing in essence Enhancements: Making a change on one platform would be radically different than on another Code-Design Divergence: They way the code is written/organized, the class structures etc., could be very different given the different implementation environments - leading to further reuse of the (above) UML models. There are of course many others - just keeping the development in sync and making sure all applications are up to the same version with the same set of features etc. Seems the effort is 3x that of a single application. So how exactly does one manage this nightmarish situation? Some thoughts: Split application to client/server to minimize the effect to client side only (not always doable) Use frameworks like Unity-3D that could take care of the cross-platform problem (mostly applicable to games and probably not to other applications etc.) Any other ways of managing a platform line? What are some proven approaches to managing/taming the effects?

  Read the article

• Identifier for the “completed” stage of a process: 0, 99, something else?

  - by Arnold Sakhnov

  Say, that you are handling a multi-step process (like a complex registration form, with a number of steps the user has go through in order). You need to be able to save the current state of the process (e.g. so the user can come back to that registration form later and continue form the step where they were left off). Obviously, you’ll probably want to give each “step” an identifier you can refer to: 1, 2, 3, 4, etc. You logic will check for this step_id (or whatever you call it) to render the appropriate data. The question: how would you identify the stage after the final step, like the completed registration state (say, that you have to give that last “step” its own id, that’s how your logic is structured). Would it be a 0, 999, a non-integer value, something else entirely?

  Read the article

• Turn-around time in PHP

  - by user73409

  Is there any one who had tried to build/convert a php version of the Excel method in computing Turn-around time(excluding holidays, weekends and non-business hours)? Excel Turn-around Time Computation: =(NETWORKDAYS(A2,B2,H$1:H$10)-1)*("17:00"-"8:00")+IF(NETWORKDAYS(B2,B2,H$1:H$10),MEDIAN(MOD(B2,1),"17:00","8:00"),"17:00")-MEDIAN(NETWORKDAYS(A2,A2,H$1:H$10)*MOD(A2,1),"17:00","8:00") :REF-URL[http://www.mrexcel.com/forum/excel-questions/514097-i-need-formual-calculate-turn-around-time.html] Thanks.

  Read the article

• Branding/Restricting a Software by License/Serial

  - by Sid

  I have made a POS System for a client of mine using MS Access Server-Client approach. He asked me to brand his software to allow only a certain "number" of users (cashiers) to access the POS System, and must be determined to the license his client will buy. EX: 10 User License = 10 Cashiers ( not necessarily 10 users, it can be 30 users, shifting) = it means 10 PCs will be installed with the client software I made. How and where do I put the logic that will determine if it is licensed or not. What I have done: I have created a serial key generator using Name. Problem is it can be duplicated once you give than name+serial combination, it would still work. I am counting the number of users logged at a time. This could be problematic as I am using MSAccess and not MSSQL. I have scrapped this idea, He also asked me if I could just put serial+mac address combination. That I could do but he will have a hard time implementing it and selling it if he needs the mac address of every computers to be installed with my POS. I am at lost on what can I do. Would like to ask for tips and suggestions. Thank you.

  Read the article

• Why shouldn't I be using public variables in my Java class?

  - by Omega

  In school, I've been told many times to stop using public for my variables. I haven't asked why yet. This question: Are Java's public fields just a tragic historical design flaw at this point? seems kinda related to this. However, they don't seem to discuss why is it "wrong", but instead focus on how can they use them instead. Look at this (unfinished) class: public class Reporte { public String rutaOriginal; public String rutaNueva; public int bytesOriginales; public int bytesFinales; public float ganancia; /** * Constructor para objetos de la clase Reporte */ public Reporte() { } } No need to understand Spanish. All this class does is hold some statistics (those public fields) and then do some operations with them (later). I will also need to be modifying those variables often. But well, since I've been told not to use public, this is what I ended up doing: public class Reporte { private String rutaOriginal; private String rutaNueva; private int bytesOriginales; private int bytesFinales; private float ganancia; /** * Constructor para objetos de la clase Reporte */ public Reporte() { } public String getRutaOriginal() { return rutaOriginal; } public String getRutaNueva() { return rutaNueva; } public int getBytesOriginales() { return bytesOriginales; } public int getBytesFinales() { return bytesFinales; } public float getGanancia() { return ganancia; } public void setRutaOriginal(String rutaOriginal) { this.rutaOriginal = rutaOriginal; } public void setRutaNueva(String rutaNueva) { this.rutaNueva = rutaNueva; } public void setBytesOriginales(int bytesOriginales) { this.bytesOriginales = bytesOriginales; } public void setBytesFinales(int bytesFinales) { this.bytesFinales = bytesFinales; } public void setGanancia(float ganancia) { this.ganancia = ganancia; } } Looks kinda pretty. But seems like a waste of time. Google searches about "When to use public in Java" and "Why shouldn't I use public in Java" seem to discuss about a concept of mutability, although I'm not really sure how to interpret such discussions. I do want my class to be mutable - all the time.

  Read the article

• Colliding Rects [migrated]

  - by user73400

  I have been working on this game, but I have a question when it comes to collision detection. Can I check for collision and have it return True: example: def collide(self, EnemyTank): tank_collision = pygame.sprite.collide_rect(self.rect, EnemyTank.rect) if tank_collision == True: return True And then make it perform an action like this: if player.collide == True: e_tank_x += 0 I am new to programming so please bear with me, I am trying as hard as I can and any comments or suggestions would also be very appreciated.

  Read the article

• To be or not to be: a solutions architech [closed]

  - by jQwierdy

  short version: as a student taking a summer internship, whats more useful for later in my career, taking a job as a solutions Architect, or a software engineer? Long version: I'm a CS major in my 3rd year, I've interviewed with some of the big companies and did not get job offers year (Morgan Stanley, Microsoft, FacebooK) but did receive offers from a startup. I actually got two offers from the same start up. I really like the startup and despite the (much) lower wage at it compared to a bigger company, I could do solutions architecture. Solutions architects (I think) work more on figuring out high level solutions directly for clients, so I'd be working often with a sales team and developers. Everyone knows what (generally) a software engineer does. And so my question is this: for my career, what would be more beneficial to a) know how to do, and b) have on my resume.

  Read the article

• What camera to choose for using with JMF (Java Media Framework)

  - by Leron

  For the past 2-3 weeks I've been searching for different ways to implement custom video streaming and in more general video capturing and manipulating, going through DVR-cards, Video Capture Cards and stuff like that. Somehow JMF was able to stay out of my sight for all this time, but since I find out about it I'm more and more sure that this is a comfortable level for me to start playing around with video and stuff. One major topic that occurs to me while searching for more info was the presence of many posts where people were complaining about the fact that any particular camera ( most of the time I think they mean web cameras) doesn't work with JMF. Even though there are a lot of different cameras (not necessarily a web cam) that are not that expensive I want to play it safe and buy one that is proven to work well with the JMF. Also due to lack of experience maybe this is irrelevant but since I'll buy the camera mostly for learning and experimenting I want to have the maximum freedom possible to mess with different features, options and so on.

  Read the article

• 139 updates wont update

  - by amnesia

  I cant seem to update the 139 files I need too. It is saying I am not connected to the internet yet I am typing this to you on the same computer?? I have deleted most of the errors as it shows the same IP all the time and I am not sure if that is mine or not ANy ideas would be greatly appreciated Failed to fetch http://au.archive.ubuntu.com/ubuntu/pool/main/i/icedtea-web/icedtea-netx-common_1.2-2ubuntu1.2_all.deb 404 Not Found

  Read the article

• Firefox: middle mouse button stopped working

  - by diversario

  In Firefox, middle mouse button/wheel has been assigned "Open link in new tab" action for a while now, by default. Since I ran Software Update tonight, this action doesn't work in Firefox anymore. To be specific, middle mouse click doesn't open links anymore. At the same time, it closes tabs just fine (middle-click a tab == 'Close tab'). I don't know the update details, but I remember that Firefox update was there among other things. I tried running Firefox with a clean profile and middle button did work there, so something must've changed with existing settings.

  Read the article

• Ubuntu boot problem/unity failure

  - by Kenny

  So here I am sitting in a big pile of muck...over the last 2 days things have just been going from bad to worse with version of Ubuntu 12.10. So 2 days ago I was fiddling around with kismet and airmon-ng. I had added a bunch of libraries, I remember adding GTK+, Glib, Pango, etc. After restarting the other day my desktop opened fine but my background was changed to the default and none of my files on the desktop were visible and the top bar and side bar were not visible or functioning. The window managers were still working. I then tried reinstalling my nvidia drivers to see if that would change anything, it did not. Then after doing some searching online I found something that suggested I try deleting the file "libgtk-3.so.0". I deleted this and tried to restart the computer. Upon restart, I was greeted by a black screen with some writing saying something about -starting clamAV [OK] -problem with Apache Server could not verify correct...something... - checking battery state [ok]. After it gets to battery state it just stops and sits there indefinitely. So to sum, I cannot login to ubuntu because it just sits at this black screeen. If anyone has any idea as to what is going on and how to fix it please let me know. Thanks!

  Read the article

• Can I get some advice on graphics cards please?

  - by Victor9098

  I know that Steam for linux is on the way and have been seen a lot of games appearing in the Ubuntu Software Centre of late but my system lacks a decent graphics card and was hoping I could get some recommendations. The desktop is a Packard Bell Imedia S1800 (or Imedia D3526 UK) with the following specs; Memory: 3.8 GiB Processor: Pentium(R) Dual-Core CPU E5800 @ 3.20GHz × 2 The system lists the graphics as 'unknown', though I think its just an integrated Intel card From what I can see there is a free PCI-E x16 slot. Any advice would be great, thanks!

  Read the article

• What extra packages are needed by Amarok to transcode to MP3?

  - by Jon Pawley

  I'm using Amarok 2.6.0, on KDE version 4.9.3, on Kubuntu 12.04. I would like to be able to copy my music onto my MP3 player (in this case, my iPhone 3), but to transcode the tracks as I copy them over. However, when I right-click on the selected track, and choose "Copy to Collection" and select my iPhone, the option to transcode to MP3 is greyed out. What additional packages does Amarok need in order to enable the transcode to MP3 option? Thanks, Jon Oh, the "Amarok DIagnostics" output, from the Help menu gives: Amarok Diagnostics Amarok Version: 2.6.0 KDE Version: 4.9.3 Qt Version: 4.8.2 Phonon Version: 4.6.0 Phonon Backend: GStreamer (4.6.2) PulseAudio: Yes Amarok Scripts: Amarok Script Console 1.0 (stopped) Discogs 1.1b (stopped) Lyricwiki .2 (stopped) Free Music Charts 1.6.0 (stopped) Librivox.org 1.0 (stopped) Cool Streams 1.0 (stopped) BBC 1.1 (stopped) Amarok Plugins: AudioCd Collection (enabled) DAAP Collection (enabled) MTP Collection (enabled) MySQLServer Collection (enabled) MySQLe Collection (enabled) UPnP Collection (enabled) Universal Mass Storage Collection (enabled) iPod, iPad & iPhone Collection (enabled) Ampache (disabled) Jamendo (disabled) Last.fm (enabled) MP3 Music Store (disabled) MP3tunes (disabled) Magnatune Store (disabled) Podcast Directory (enabled) gpodder.net (enabled) Local Files & USB Mass Storage Backend (enabled) NFS Share Backend (enabled) SMB (Windows) Share Backend (enabled)

  Read the article

• Ubuntu login failed to set mode on [CRTC:10] message

  - by polyglot0727

  I recently installed Windows Server 2003 and Ubuntu 12.10 side by side. Both worked ok for the first couple of boots. I can boot to Server, but am unable to boot to Ubuntu. I receive this message. ubuntu login: [ 18.684356 ] [drm:drm_crtc_helper_set_config] ERROR failed to set mode on [CRTC:10] [ 18.840839 [drm:drm_crtc_helper_set_config] ERROR failed to set mode on [CRTC:10]. Any idea what the issue is?

  Read the article

• How to override the system locale on a single command?

  - by Alistair Buxton

  When helping someone we often ask them to show the output of a command eg: sudo fdisk -l | pastebinit If the user is not using an English locale, the output may be in a foreign language: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 huvuden, 63 sektorer/spår, 91201 cylindrar, totalt 1465149168 sektor This complicates support. How can one run a command with an override on the system locale to get English output?

  Read the article

• Boot-Repair after messing up NTFS partition

  - by QuietThud

  I posted this question explaining what happened after I tried to create a new swap partition on a Win/Ubuntu dual-boot machine. I have since created a live-boot USB and installed Boot-Repair. I had it "recommend repairs", after which it tried repairing the wubi filesystems, which as far as I'm aware was not necessary. I'm not sure where to go from here; I don't care very much about backing up my files, I just want to be able to boot the machine. In the Advanced Options the "Repair Windows boot files" box is uncheckable both GRUB tabs are unclickable (I do have GRUB installed) Here is my Pastebinit with the details from the Boot-Repair. Please be as explicit as possible, as I am proving to be disproportionately bad at this type of task. Thank you! P.S. I keep seeing: cryptsetup: WARNING: failed to detect canonical device of overlayfs cryptsetup: WARNING: could not determine root device from /etc/fstab TestDisk: GPARTED:

  Read the article

< Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >