Monthly Archives

Articles indexed in September 2012

Page 375/470 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

  • Expiry time in notify-send notifications

    - by gsingh2011
    On my HP computer running Ubuntu 12.04, the brightness and volume increments were much higher than I wanted. On top of that, the notification for the volume was just plain wrong (0% sound did not correspond to 0 on the progress bar). So I decided to override these options with my own commands. I used CompizConfig Settings Manager to add custom commands to the brightness and volume keys (this couldn't be done in the regular settings because these keys were handled by the BIOS, unlike normal function keys). I used xbacklight to control the brightness and amixer to control the volume. The problem is that the nice notify-send notifications don't show up when I manually set the brightness/volume, so now I have to do that myself too. However, there are two problems with notify-send: The expire time option doesn't work You have to wait until a notification is finished before the next one comes up Before I overrided the brightness/volume keys, the system was able to send notifications without these two restrictions. Notifications disappeared within 3 seconds (instead of the default 10), and if I double tapped the volume or brightness button, the progress bar would immediately change to the new brightness (instead of showing the old progress bar for 10 seconds and then showing the new one). Since the system was able to do it, I was wondering how I can achieve the same type of notifications?

    Read the article

  • Why doesn't Bumblebee work with Nvidia GT640M?

    - by Dickson Wong
    I've done a clean install of Ubuntu 12.04 from a liveCD on a Samsung Series 7 Chronos with a 3rd Gen i7 and the Nvidia GeForce GT 640M. I've followed this: (https://wiki.ubuntu.com/Bumblebee#Installation) to install bumblebee so I can switch to my discrete GPU. I have not used ironhide, or preivous bumblee since it's a clean install. When I use optirun, optirun says it can't initialize the GPU: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ERROR]Aborting because fallback start is disabled. I've looked at the troubleshooting page for bumblebee and I have the correct driver and do not think I have aspci disabled. Also, my keyboard becomes very unresponsive and my mouse skips and isn't smooth after optirun crashes. The only thing to fix this is a reboot. Here's my lspci | grep VGA output: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0fd2 (rev ff) It seems Ubuntu can see my graphics card. I don't really know what's going on.

    Read the article

  • notifyOSD in gnome is not like in Unity

    - by Rodrigo
    tengo dos sistema operativos ubuntu 12.04, con escritorio gnome. En uno, las notificaciones emergentes son como en unity, pero en el otro SO son diferentes, grises, sin transparencia, y también hay que cerrarlas, por lo que quiero que quede la que viene por defecto en Unity en éste gnome también. Si alguie sabe algo sobre estas notificaciones emergentes feas, que por favor, me ayude. Gracias!! Google Traslate: I have two operating system Ubuntu 12.04 with gnome desktop. In one, the pop-up notifications are as in unity, but in the other OS are different, gray, not transparent, and you also have to close them, so I want to make the default one in gnome Unity in this too. If alguie know something about these ugly pop-up notifications, please, help me. Thanks!

    Read the article

  • Cannot install extensions required for GNOME Shell themes

    - by Soham Chowdhury
    I keep getting this output: soham@fortress:~$ sudo apt-get install gnome-shell-extensions gnome-tweak-tool Reading package lists... Done Building dependency tree Reading state information... Done gnome-tweak-tool is already the newest version. The following NEW packages will be installed: gnome-shell-extensions 0 upgraded, 1 newly installed, 0 to remove and 43 not upgraded. 1 not fully installed or removed. Need to get 0 B/121 kB of archives. After this operation, 849 kB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 179291 files and directories currently installed.) Unpacking gnome-shell-extensions (from .../gnome-shell-extensions_3.4.1~git20120508.dfd7191a-0ubuntu1~12.04~ricotz0_all.deb) ... dpkg: error processing /var/cache/apt/archives/gnome-shell-extensions_3.4.1~git20120508.dfd7191a-0ubuntu1~12.04~ricotz0_all.deb (--unpack): trying to overwrite '/usr/share/locale/lv/LC_MESSAGES/gnome-shell-extensions.mo', which is also in package gnome-shell-extensions-common 3.2.0-0ubuntu1~oneiric1 No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/gnome-shell-extensions_3.4.1~git20120508.dfd7191a-0ubuntu1~12.04~ricotz0_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Update: Fixed that. Now GNOME Tweak Tool shows me an exclamation mark beside the extension enable button, saying "Extension doesn't support shell version". My GNOME shell is already the latest version. Help!

    Read the article

  • How do I get this Mac OS X exposé behavior?

    - by quangtruong1985
    In Mac os x, I can move all windows to the nearest corner by hitting F11 key. I'm just wondering if there is a compiz plugin works like that. I know that there is Scale plugin already. But all that I want is something like this. You'll see, press a key and all windows fly off to nearest corner so I can drag/drop file or do something else on my desktop, then press the key again and all windows fly back.

    Read the article

  • upgraded "Compiz' and "Unity", now no Unity 3D on screen

    - by user18432
    Today when I logged in to my Ubuntu 12.04, the update manager told me of some upgrades. Compiz and Unity were in those upgrades. After I installed the upgrades, I can no longer get the Unity panel on the left side of screen or the systray at the top of screen. I now have to run Ubuntu 12.04 with Unity 2D. My laptop is a HP Pavilion dv9000 with Nvidia GeForce Go 7600 video. I tried to run "unity --reset" but it says there are serious issues with compiz. I have cut & pasted the read out from the terminal below. [09:35:02] xxxxxxx@L01U1204:~$ unity --reset unity-panel-service: no process found Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done compiz (core) - Warn: failed to receive ConfigureNotify event on 0x2e00004 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x580005a compiz (core) - Warn: failed to receive ConfigureNotify event on 0x3600006 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x3200255 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1600002 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1400002 Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done I/O warning : failed to load external entity "/home/brwright/.compiz/session/10afaca1703486b216133648409481824100000130110002" Initializing session options...done Initializing gnomecompat options...done Initializing animation options...done Initializing fade options...done Initializing unitymtgrabhandles options...done Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done compiz (core) - Error: Couldn't load plugin '/usr/lib/compiz/libunityshell.so' : /usr/lib/compiz/libunityshell.so: undefined symbol: _ZNK5unity4dash10Controller6windowEv compiz (core) - Error: Couldn't load plugin 'unityshell' compiz (core) - Warn: unhandled ConfigureNotify on 0x7000090! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000093! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000096! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000099! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x700009c! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x700009f! compiz (core) - Warn: this should never happen. you should probably file a bug about this. Initializing annotate options...done Initializing blur options...done Initializing clone options...done Initializing colorfilter options...done Initializing commands options...done Initializing cube options...done Initializing imgjpeg options...done Initializing kdecompat options...done Initializing mag options...done Initializing neg options...done Initializing obs options...done Initializing opacify options...done Initializing put options...done Initializing resizeinfo options...done Initializing ring options...done Initializing rotate options...done Initializing scaleaddon options...done Initializing screenshot options...done Initializing shift options...done Initializing staticswitcher options...done Initializing switcher options...done Initializing thumbnail options...done Initializing unityshell options...done Initializing water options...done Initializing winrules options...done Initializing wobbly options...done Setting Update "main_menu_key" Setting Update "run_key" Starting gtk-window-decorator As you can see the terminal never comes back to the CI prompt. I must do a control C to get to the CI prompt, but then the OS is frozen. I have to reboot and run Unity 2D in able to do anything on my laptop. I hope I have explained this enough and provided some useful info. I am at a loss to understand what the problem is, or what exactly what is causing the problem. Is it Unity or Compiz? Can anyone help?

    Read the article

  • Window manager not loading when gnome-classic starts

    - by Dave M G
    When I boot up or log into gnome-classic (no effects), windows don't have the frame around them that has the minimize and close buttons and all that. After that, there all sorts of issues - for example, when I open a new window, it's in the very top left corner, obscuring the menu on the gnome panel... just a whole bunch of minor annoyances. I can get things working by by loading the compiz fusion icon and then selecting to reload the window manager. Of course this is less than ideal. How do I get the window manager to load automatically? Update: It seems that I get no window manager whenever I load Compiz, even after logging in. So it looks like the problem is more generally with Compiz's window manager.

    Read the article

  • Set a specific screen resolution with xrandr

    - by dierre
    So I installed LUbuntu 11.04 on my VirtualBox. I couldn't find the 1366x768 resolution so I installed Guest Additions but it wasn't there. So I used this code to set the correct resolution: gtf 1366 768 60 xrandr --newmode "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772 795 $ xrandr --addmode VBOX0 1368x768_60.00 xrandr --output VBOX0 --mode 1368x768_60.00 The problem is that I can't find a way to save this information for the next reboot. I tried on .xinitrc and nothing happens. Then I tried on .bashrc but it's not working, I need to start a console before this commands are executed.

    Read the article

  • Redirect Permanent and https

    - by Clem
    I just set up https on my server, and I have an issue with redirect permanent. If I have a link for example http://domain.com/index.html it redirect me on https://www.domain.comindex.html The / is missing and I can't figure out how to fix it. It's work with http://www.domain.com/index.html Here is my httpd.conf <VirtualHost *:80> ServerName domain.com Redirect permanent / https://www.domain.com/ </VirtualHost> <VirtualHost *:80> ServerName www.domain.com Redirect permanent / https://www.domain.com/ </VirtualHost> <VirtualHost *:443> DocumentRoot /var/www/domain/ ServerName www.domain.com SSLEngine on SSLCertificateFile ssl.crt SSLCertificateKeyFile ssl.key </VirtualHost>

    Read the article

  • Digital Asset Management System

    - by Prashant
    I am looking for an opensource web-based digital asset management system. My requirements are to create a web based system where users can upload and download .zip, .jpg, .png, .pdf, .doc, .xls etc. media files. Also user management should be there, so that we can create multiple users and accordingly give them permissions. I have found one http://www.resourcespace.org/ but it looks a bit big and complicated. It is fitting to my need but I am looking and researching a bit more to get some good and more easy to use system. If anyone knows such web based system or tool, please share.

    Read the article

  • Facebook like button for a Facebook feed item

    - by jverdeyen
    Here is what I do: When the admin of a website i'm creating adds a new 'news' item to his website, it directly posts the same item on the Facebook 'fanpage' of the website. This is done by an Facebook app with the permissions to post an item on the Facebook fanpage. So far so good. I'm getting the new post id from the facebook graph. Here is what I want to achieve: I'm adding a 'like' button on the original website, but when this is clicked it should be referenced to the same post item on the facebook page. So if someone likes the news post on the website he should also like the referencing facebook feed post. Which is exactly the same. Can this be done? I've been playing around with the href etc of the like button, without any success. When I hit the like button it likes the url given, but is doesn't recognizes that this is a feed post. Any idea? Thx in advance.

    Read the article

  • Checking for alternate keys with XNA IsKeyDown

    - by jocull
    I'm working on picking up XNA and this was a confusing point for me. KeyboardState keyState = Keyboard.GetState(); if (keyState.IsKeyDown(Keys.Left) || keyState.IsKeyDown(Keys.A)) { //Do stuff... } The book I'm using (Learning XNA 4.0, O'Rielly) says that this method accepts a bitwise OR series of keys, which I think should look like this... KeyboardState keyState = Keyboard.GetState(); if (keyState.IsKeyDown(Keys.Left | Keys.A)) { //Do stuff... } But I can't get it work. I also tried using !IsKeyUp(... | ...) as it said that all keys had to be down for it to be true, but had no luck with that either. Ideas? Thanks.

    Read the article

  • PHP - WideImage class cropping

    - by Kolind
    I am trying to crop a large image to make thumbnails. But I can't get WideImage to save the file. I've tried the following: 1st method: $img = WideImage::load('../files/' . $file_name)->crop('center', 'center', 200, 200); $img->saveToFile('../files/thumb/thumb_' . $file_name); 2nd method: $img = WideImage::load('../files/' . $file_name)->crop('center', 'center', 200, 200); $img->copy('../files/thumb/thumb_' . $file_name); But nothing seems to happen, when I am performing any of these methods. I am getting no errors and no thumbnails. Am I doing something wrong here?

    Read the article

  • LINQ Query using UDF that receives parameters from the query

    - by Ben Fidge
    I need help using a UDF in a LINQ which calculates a users position from a fixed point. int pointX = 567, int pointY = 534; // random points on a square grid var q = from n in _context.Users join m in _context.GetUserDistance(n.posY, n.posY, pointX, pointY, n.UserId) on n.UserId equals m.UserId select new User() { PosX = n.PosX, PosY = n.PosY, Distance = m.Distance, Name = n.Name, UserId = n.UserId }; The GetUserDistance is just a UDF that returns a single row in a TVP with that users distance from the points deisgnated in pointX and pointY variables, and the designer generates the following for it: [global::System.Data.Linq.Mapping.FunctionAttribute(Name="dbo.GetUserDistance", IsComposable=true)] public IQueryable<GetUserDistanceResult> GetUserDistance([global::System.Data.Linq.Mapping.ParameterAttribute(Name="X1", DbType="Int")] System.Nullable<int> x1, [global::System.Data.Linq.Mapping.ParameterAttribute(Name="X2", DbType="Int")] System.Nullable<int> x2, [global::System.Data.Linq.Mapping.ParameterAttribute(Name="Y1", DbType="Int")] System.Nullable<int> y1, [global::System.Data.Linq.Mapping.ParameterAttribute(Name="Y2", DbType="Int")] System.Nullable<int> y2, [global::System.Data.Linq.Mapping.ParameterAttribute(Name="UserId", DbType="Int")] System.Nullable<int> userId) { return this.CreateMethodCallQuery<GetUserDistanceResult>(this, ((MethodInfo)(MethodInfo.GetCurrentMethod())), x1, x2, y1, y2, userId); } when i try to compile i get The name 'n' does not exist in the current context

    Read the article

  • Why initialize an object to empty

    - by ProgEnthu
    I am learning windows programming with the help of MSDN.Why would somebody initialize an object like the following? WNDCLASS wc = { }; Will this zero all the memory of the object? Whole source code is following: #ifndef UNICODE #define UNICODE #endif #include <windows.h> LRESULT CALLBACK WindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam); int WINAPI wWinMain(HINSTANCE hInstance, HINSTANCE, PWSTR pCmdLine, int nCmdShow) { // Register the window class. const wchar_t CLASS_NAME[] = L"Sample Window Class"; WNDCLASS wc = { }; wc.lpfnWndProc = WindowProc; wc.hInstance = hInstance; wc.lpszClassName = CLASS_NAME; RegisterClass(&wc); // Create the window. HWND hwnd = CreateWindowEx( 0, // Optional window styles. CLASS_NAME, // Window class L"Learn to Program Windows", // Window text WS_OVERLAPPEDWINDOW, // Window style // Size and position CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT, NULL, // Parent window NULL, // Menu hInstance, // Instance handle NULL // Additional application data ); if (hwnd == NULL) { return 0; } ShowWindow(hwnd, nCmdShow); // Run the message loop. MSG msg = { }; while (GetMessage(&msg, NULL, 0, 0)) { TranslateMessage(&msg); DispatchMessage(&msg); } return 0; } LRESULT CALLBACK WindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam) { switch (uMsg) { case WM_DESTROY: PostQuitMessage(0); return 0; case WM_PAINT: { PAINTSTRUCT ps; HDC hdc = BeginPaint(hwnd, &ps); FillRect(hdc, &ps.rcPaint, (HBRUSH) (COLOR_WINDOW+1)); EndPaint(hwnd, &ps); } return 0; } return DefWindowProc(hwnd, uMsg, wParam, lParam); }

    Read the article

  • Convert string to integer and multiply two integers

    - by demlasjr
    I have a big time trying to either convert a string into a integer or multiply two integers. I can't convert the string into integer because it's resulting me into a boolean (when I'm using var_dump). I can convert the other integer in string, but I'm unable to multiply it. I have this: <? $fees=$commerce->cart->get_total(); $payfee = str_replace('&nbsp;&euro;', '', $fees); $payfee = str_replace(',','', $payfee); //this is the string $fee = 0.025; $paypal = $payfee * $fee; //this thing is not working ?> I tried converting the payfee in integer, but still can't make it work. I did something like this before and worked well, but not this time. Any help will be appreciated. P.S Thank you to the whole stackoverflow.com community which helped me many times before.

    Read the article

  • Count Distinct With IF in MySQL?

    - by user1600801
    I need to do a query with count distinct and IF, but the results always are 0. What I need to do, is count the different users from a table in different months, using IF. My individual query, for one month is this: SELECT COUNT(DISTINCT(idUsers)) AS num_usuarios FROM table01 WHERE date1='201207' But I need to get the results by different months in the same query. What I'm trying to do is this: SELECT IF(date1=(201207), count(distinct(idUsers)), 0) as user30, IF(fecha1=(201206), count(distinct(idUsers)), 0) as user60, IF(fecha1=(201205), count(distinct(idUsers)), 0) as user90, IF(fecha1=(201204), count(distinct(idUsers)), 0) as user120, IF(fecha1=(201203), count(distinct(idUsers)), 0) as user150 FROM table01 But the all the results are always 0.

    Read the article

  • whats wrong with this regular expression c#?

    - by Greezer
    I runned into a problem with my regular expressions, I'm using regular expressions for obtaining data from the string below: "# DO NOT EDIT THIS MAIL BY HAND #\r\n\r\n[Feedback]:hallo\r\n\r\n# DO NOT EDIT THIS MAIL BY HAND #\r\n\r\n" So far is got it working with: String sFeedback = Regex.Match(Message, @"\[Feedback\]\:(?<string>.*?)\r\n\r\t\n# DO NOT EDIT THIS MAIL BY HAND #").Groups[1].Value; This works except if the header is changed, therefore I want the regex to read from [feedback]: to the end of the string. (symbols, ascii, everything..) I tried: \[Feedback]:(?<string>.*?)$ Above regular expression does work in some regular expression builders online but in my c# code its not working and returns a empty string. can someone help me with this regular expression? thanks in advance

    Read the article

  • Multidimensional Array To Mysql Codeigniter

    - by rochellecanale
    A little help how can I create an input query using this array? Or how can I pass it in the table? my table layout sample is this: sales_table id | product_name | price | qty | subtotal This is derived from the var_dump() function. Here is my code in array //array code from unserialized function $products = unserialize($this->session->userdata('product_list')); //This is the output. Array ( [2] => Array ( [id] => 2 [product_name] => NOKIA 5110 [product_desc] => Cellphone [product_price] => 500.00 [product_qty] => 1 [product_amount] => 500 [product_code] => NOKI2012-84353 ) [3] => Array ( [id] => 3 [product_name] => HP IPAQ RW6828 [product_desc] => Cellphone [product_price] => 1500.00 [product_qty] => 1 [product_amount] => 1500 [product_code] => HP I2012-08386 ) )

    Read the article

  • Encrypt/ Secure communication Android app <-> REST webservice

    - by Ascorbin
    I want to create a backend for my android app with Tapestry5 and this http://code.google.com/p/t5-restful-webservices/ plugin. The app will communicate with the server by calling REST methods both for registered users (that would be easy to secure I guess) as well as unregistered users. Now of course I don't want people to just call that webservice from a browser. How can I make sure that only my app can make calls to this backend?

    Read the article

  • Injecting the mailer service, got "The service definition 'mailer' does not exist"?

    - by Gremo
    This is the class where the service mailer should be injected: namespace Gremo\SkebbyBundle\Transport; use Swift_Mailer; use Gremo\SkebbyBundle\Message\AbstractSkebbyMessage; class MailerTransport extends AbstractSkebbyTransport { /** * @var \Swift_Mailer */ private $mailer; public function __construct(Swift_Mailer $mailer) { $this->mailer = $mailer; } /** * @param \Gremo\SkebbyBundle\Message\AbstractSkebbyMessage $message * @return void */ public function executeTransport(AbstractSkebbyMessage $message) { /* ... */ } } Service id is gremo_skebby.transport.mailer, placed inside mailer.xml file: <parameters> <parameter key="gremo_skebby.converter.swift_message.class"> Gremo\SkebbyBundle\Converter\SwiftMessageConverter </parameter> <parameter key="gremo_skebby.transport.mailer.class"> Gremo\SkebbyBundle\Transport\MailerTransport </parameter> </parameters> <services> <service id="gremo_skebby.converter.swift_message" class="%gremo_skebby.converter.swift_message.class%" public="false" /> <service id="gremo_skebby.transport.mailer" class="%gremo_skebby.transport.mailer.class%" public="false" parent="gremo_skebby.tranport.abstract_transport"> <argument type="service" id="mailer" /> </service> </services> When i try to inject the gremo_skebby.transport.mailer into another service (an helper) i get: Symfony\Component\DependencyInjection\Exception\InvalidArgumentException : The service definition "mailer" does not exist. That is strange, because command php app/console container:debug shows that the mailer service actually exists: mailer container Swift_Mailer I'm loading mailer.xml file dynamically by the extension: if(in_array($configs['transport'], array('http', 'rest', 'mailer'))) { $loader->load('transport.xml'); $loader->load($configs['transport'] . '.xml'); $container->setAlias('gremo_skebby.transport', 'gremo_skebby.transport.' . $configs['transport']); } $loader->load('skebby.xml'); ... and gremo_skebby.transport service is injected into gremo_skebby.skebby service (skebby.xml): <parameters> <parameter key="gremo_skebby.skebby.class"> Gremo\SkebbyBundle\Skebby </parameter> </parameters> <services> <service id="gremo_skebby.skebby" class="%gremo_skebby.skebby.class%"> <argument type="service" id="gremo_skebby.transport" /> </service> </services> A quick test is giving me the same InvalidArgumentException: public function testSkebbyWithMailerTransport() { $loader = new GremoSkebbyExtension(); $container = new ContainerBuilder(); $config = $this->getEmptyConfiguration(); $loader->load(array($config), $container); $this->assertTrue($container->hasDefinition('gremo_skebby.transport.mailer')); $this->assertTrue($container->hasDefinition('gremo_skebby.skebby')); $this->assertInstanceOf('Gremo\SkebbyBundle\Skebby', $container->get('gremo_skebby.skebby')); }

    Read the article

  • The subscription model behind CSS selectors?

    - by Martin Kristiansen
    With CSS selectors a query string body > h1.span subscribes to a specific type of nodes in the tree. Does anyone know how this is done? Selectors for transformations, how does the browser select the result set? And is there a trick to making it efficient? I imagine there being some sort of hierarchical type-tree for the entire structure to which the nodes subscribe and which is what is used when doing the selector queries — but this is only a guess. Does anyone know the real answer? Or even more interesting, what would be the best way to do dynamic lookups on a tree based on jQuery/CSS search queries?

    Read the article

  • How to make a single image in to different(optimize) sizes once image uploaded?

    - by Shakil
    Hi All i am working on mvc4(webapi) i need create for single image into different sizes for example i had loaded a image for file upload control once press the button of upload the single image should divide in to different sizes (like thumbnail large size medium size ) actually i am new for webapi i don't have any idea about it but i need to make this by writing hard code i will provide a path for it to store images could any body plz help me to do this work thank in advance

    Read the article

  • In a pre-commit hook - how to access/compare current and previous versions of files

    - by EthanML
    I'm trying to add to our existing pre-commit SVN hook so that it will check for and block an increase in file size for files in specific directory/s. I've written a python script to compare two file sizes, which takes two files as arguments and uses sys.exit(0) or (1) to return the result, this part seems to work fine. My problem is in calling the python script from the batch file, how to reference the newly committed and previous versions of each file? The existing code is new to me and a mess of %REPOS%, %TXN%s etc and I'm not sure how to go about using them. Is there a simple, standard way of doing this? It also already contains code to loop through the changed files using svnlook changed, so that part shouldn't be an issue. Thanks very much

    Read the article

  • Netty options for real-time distribution of small messages to a large number of clients?

    - by user439407
    I am designing a (near) real-time Netty server to distribute a large number of very small messages to a large number of clients across the internet. In internal, go as fast as you can testing, I found that I could do 10k clients no sweat, but now that we are trying to go across the internet, where the latency, bandwidth etc varies pretty wildly we are running into the dreaded outOfMemory issues, even with 2 gigs of RAM. I have tried various workarounds(setting the socket stack sizes smaller, setting high and low water marks, cancelling things that are too old), and they help a little, but they seem to only help a little bit. What would some good ways to optimize Netty for sending large #s of small messages without significant delays? Also, the bulk of the message only consists of one kind of message that I don't particularly care if it doesn't arrive. I would use UDP but because we don't control the client, thats not really a possibility. Is it possible to set a separate timeout solely for this kind of message without affecting the other messages? Any insight you could offer would be greatly appreciated.

    Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >