Monthly Archives

Articles indexed in December 2012

Page 4/287 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Operative systems on SD cards

  - by HisDudeness

  I was getting some wild ideas the last days, like putting some operative systems into SD cards rather than on my hard drive. I'll go further into details now and explain what lead me to consider this probably abominable decision. I am on a laptop (that means I have a native SD-card reader) which is currently running a cross-distro setup, with a bunch of Linux systems (placed in dedicated ext4 logical partitions into a huge extended one) regulated by an unique GRUB. Since today, my laptop haven't even seen any Windows system with binoculars. I was thinking about placing all the os part of my setup into a Secure Digital to save all my 500 Gb Hard Drive for documents, music, videos and so on, and being able to just remove the SD and boot my system into another computer too, as well as having the possibility of booting other systems into mine by just plugging in another SD, without having to keep it constantly placed in my PC. Also, in the remote case in the near future I just wanted to boot Windows 8 in it, I read it causes major boot incompatibility issues with other systems by needing a digital signature in order for them to start. By having it in a removable drive, I could just get rid of it when I'm needing him and switch its card with Linux one, and so not having any obstacles to their boot. Now, my questions are: I know unlikely traditional rotating disk drives, integrated circuits ones have a limited lifespan in terms of cluster rewriting. Is it an obstacle to that kind of usage? I mean, some Ultrabooks are using SSD now, is it the same issue, or there are some differences between Solid State Drives and Secure Digitals in that sense? Maybe having them to store system files which are in fixed positions (making the even-usage of cluster technology useless) constantly being re-read and updated and similar things just gets them soon unserviceable, do it? Second question: are all motherboards and BIOSes able to boot from SDs just like they are from USB pen drives (I mean, provided card reader is USB-connected, isn't it)? Or can't bootloaders like GRUB be installed on SDs working? If they can't, is it a solution installing GRUB to MBR and making boot option pointing to SD? Will it work? Are there any other problems to installing OSs on a Secure Digital?

  Read the article

• I get a consistency y error when I use my second hard drive

  - by Stavros

  I have two hard drives with win8 installed to both of them. Sometimes, when I boot from the second one (with F12 boot-menu and the second drive selection) and later reboot and start my PC from the first one, I get a disk error for a consistency problem. Windows ask for a disk check and after that, I can't anymore boot from the second drive or have access to it. Why this happens and how can I prevent it? What options do I have except from reinstalling windows? Thanks Stavros

  Read the article

• How to detect/list rogue computers connected to a WIFI network without access to the Wifi Router interface?

  - by JJarava

  This is what I believe to be an interesting challenge :) A relative (that leaves a bit too far to go there in person) is complaining that their WIFI/Internet network performance has gone down abysmally lately. She'd like to know if some of the neighbors are using her wifi network to access the internet but she's not too technically savvy. I know that the best way to prevent issues would be to change the Router password, but it's a bit of a PITA having to re-configure all wifi devices... and if the uninvited guest broke the password once, they can do it again... Her wifi router/internet connection is provided by the telco, and remotely managed so she can log-on to their telco account's page and remotely change the router's Wifi password, but doesn't have access to the router status page/config/etc unless she opts out of the telco's remote support and mainteinance service... So, how could she check if there are guests in the wifi with this restrictions and in the most "point and click way"? In this case I'd probably use nmap to look for other devices in the network, but I'm not sure if that's the easiest way to do it. I'm not a wifi expert, so I don't know if there are any wifi-scanning utils that can tell us who's talking to the router... Lastly, she's a Windows user as I guess that'll influence the choice of tools available Any suggestions more than welcome Regards!

  Read the article

• Windows 7 only IE working other browsers not

  - by user177259

  I have strange behavior with browsers on my PC (but it work well before yesteday) My Chrome, FF (ERROR: Error 101 (net::ERR_CONNECTION_RESET): Unknown Error ) write me that can't connect to Internet I need to check Proxy, Firewall etc. I did it and all settings are fine, on other PC in this area all working with the same settings. Only explorer can work in internet. How to solve it ? Thanks I have tried chrome://net-internals/#tests in grope and test gooogle.com but all test failed with 101 error

  Read the article

• Changing Flash player of Firefox cache

  - by Prasenjit Chatterjee

  I want to relocate the Flash player plugin of Firefox cache so that it saves my C: drive space when I watch youtube videos. I successfully changed the firefox cache by opening about:config and then created a new string key "browser.cache.disk.parent_directory" where I put the value of the new cache location. But it doesn't work with online streaming contents such as youtube videos. Please guide me where does it get stored and how to change its cache into another drive.

  Read the article

• Restore boot sector from a hard disc to another

  - by giang.asl.8

  I have a win7 on my old Seagate HDD. Recently I installed one new SSD and setup win8 on it. So I have a boot table to choose win7 or win8 to startup. Now when I tried to remove the old one (the Seagate), I can't boot into windows any more. I just have a blinking underscore in boot screen, forever ang forever. I guess the reason is that the boot sector, or boot table (or something like that) was installed on the old HDD. So may someone show me how to boot into my win8 without reinstall the old HDD.

  Read the article

• Diagnosing RAM issues

  - by TaylorND

  I have an old Acer Aspire T180 desktop. The specs are as follows: AMD Athlon 64 3800+ 2.4GHz 1GB DDR2 SDRAM 160GB DVD-Writer (DVD±R/±RW) Gigabit Ethernet 17" Active Matrix TFT Color LCD Windows Vista Home Basic Mini-tower AST180-UA381B According to the information in the computer's documentation the computer comes with 1 GB of RAM. It has two DDR2 SDRAM sticks. I used to have Windows Vista installed. Then I removed it and install Windows 7, and now I have since removed Windows 7 and installed Windows XP. According to Windows XP with both RAM sticks in the computer has 768 MB. Isn't this supposed to be 1 GB of RAM or 1024 MB of RAM? Is the amount of RAM installed only partly used by the Operating System? Is there's something I'm missing? If I remove either one of the RAM sticks I'm left with 448 MB of RAM. These numbers don't seem to add up. If each of the RAM sticks contains at least 448 MB of RAM shouldn't they (both being in) provide 896 MB of RAM. Even then, isn't that less than a GB of RAM? I'm not too experienced in hardware so I thought this would be the best place to ask. As a follow up question, is the RAM I have enough to run/multitask with Windows XP efficiently? I plan to do a lot of computing with the system (although not gaming), should I invest in more RAM?

  Read the article

• "Keep iTune music files organized" no longer works?

  - by user22105

  I remember iTunes used to have the option to "keep music files organized" (i know it still does in its advanced Properties). When I used to edit music's artist, genre or album information. The mp3 file is automatically updated as well. But lately I've been updating some mp3s. And if I tried to open the updated mp3's Properties, under Details, the Artist, genre, and album information is not available. How can i fix this? Added: you can try editing this mp3 file with iTunes, it didn't work on my PC Here's a screenshot of what Im seeing after the edit.

  Read the article

• Set LD_LIBRARY_PATH and CLASSPATH on cluster nodes before running a hadoop job

  - by Ashish Sharma

  I need to set LD_LIBRARY_PATH and CLASSPATH before running a job a cluster. In LD_LIBRARY_PATH i need to add location of some jars which are required while running the job, As these jars are avaiable at my cluster, similar with CLASSPATH. I have a 3 NODE cluster, I need to set this LD_LIBRARY_PATH and CLASSPATH for all the 3 data nodes so that the following jar are available while running the job

  Read the article

• Connecting via Ethernet on second AirPort Extreme

  - by b-b

  Would It be possible to connec my xbox 360 to a second AirPort Extreme, wherein this AirPort Extreme is wirelessly linked to the first? I assume it is and is straight forward, but I thought I'd ask first. Also, would an Ethernet to a second AirPort Extreme be any faster than, say, a dual band wifi connection from a MacBook? Obviously environmental factors play in, but I'm mostly curious about the relative receiving strength of the airport vs laptop.

  Read the article

• Windows Backup failed with error 0x807800C5

  - by Alexey Ivanov

  I setup backup of my Windows 8 laptop with Windows 7 File Recovery (known as Backup and Restore in Windows 7). Backup of files runs successfully. But if I try to create system image, it fails with error 0x807800C5: Error details on the dialog: The mounted backup volume is inaccessible. Error details in the system log: There was a failure in preparing the backup image of one of the volumes in the backup set. I save the backup to a network location, WD MyBookLive.   Edit: I tried some of the steps suggested in the various thread about this issue: Cleaned up the backup location: Removed MediaID.bin in the backup location. Removed folder <ComputerName> from WindowsImageBackup. Restarted backup resulted in the same error. However, the error dialog shows slightly different error message: The specified backup disk cannot be found. Performed System File Check by running sfc /scannow. It showed no errors. Running backup failed nevertheless. I tried searching Google for error code but I've found no solution so far. Update: I submitted technical support request to Microsoft. The first suggestion was to clean boot, but it didn't help. I pointed out that I had tried all the methods from the same problem on MS Answers, and nothing had helped.

  Read the article

• In Windows 7, why won't my display stay off despite the power settings saying it should?

  - by Jer

  I'm completely stumped by this. My simple use case is that when I'm in bed, I use a cordless mouse to browse the web, watch videos, etc. - the monitor is across the room. When I'm going to sleep, I want to shut the monitor off. I also want to be able to turn it back on in the morning. I just want to turn the monitor off and on using only the mouse. I thought of creating a power setting that turned the monitor off asap (the shortest amount of time is one minute; that's fine). I have one that does this. It worked great for almost a year on my old XP machine, and for about four months on my new Windows 7 laptop (which I essentially use as a desktop). All of a sudden a couple weeks ago, it just stopped working - my monitor won't turn off on its own anymore. Here are the settings: I tried other options. Based on the advice here I tried nircmd. This seemed great. I created a shortcut with the command line: "C:\Program Files\nircmd\nircmd.exe" cmdwait 1000 monitor off I click this, and in one second the monitor goes off. However about five seconds later it turns back on, and I've been extra careful to make sure the mouse isn't moving. I have no idea what's going on. Based on both of these things, my only guess is that something could be running in the background which somehow makes the computer think it's in use. I've tried killing as many programs as possible but I still get the same behavior. Any advice? I'm mainly curious about how to debug, but am open to other suggestions about turning the monitor off and on with just the mouse as well.

  Read the article

• Why isn't my phone charging with some micro usb cables?

  - by Jacxel

  I ordered 3 microUSB cables over ebay. My phone was at about 50% battery and I wanted to use it as a hot spot for some browsing on my laptop, so I plugged it in, a charging icon appeared on the phone, my laptop showed it as a connected usb device and so I went about my business. About 30 minutes later I checked the phone and to my dismay saw 45% battery. But ahh, I thought, I have been putting the poor little thing under too much pressure, acting as a WiFi hotspot must drain the battery quicker than it can charge via usb, perhaps even using my laptops usb port wouldn't output enough power. Unscathed I continued on and when I was going to bed I plugged the usb cable into a mains adapter and switched everything battery consuming off and content, went to sleep. The next morning I was awoken by my phones alarm which got cut off unexpectedly. I attempted to unlock my phone which showed no more signs of life. Why isn't my phone charging with these new USB cables? For clarity: They transfer data with no problems The phone appears to be charging, showing all the signs and lights it normally would, the cable that came with the phone works as you would expect, so its not a fault with the phone, I think they slow the discharging of the phone, but I could be wrong. Are these just bad quality cables? Is there a way to fix this issue?

  Read the article

• Why is NTFS case sensitive?

  - by Luke

  I personally thought that NTFS was case insensitive, since you can type cmd, CMD, cMd or even CmD and still get the command prompt. However, why is it that during a CHKDSK x: /f /r, sometimes it fixes capitalization in some files? If it didn't care about the case, it shouldn't matter about that, and CHKDSK shouldn't be checking if it's actually CMD or cmd. Am I right? Where does it actually matter in the file system?

  Read the article

• Formatting a 5.25" floppy disk

  - by Spütnik

  So after the massive trouble of finding a 5.25" floppy drive and a connecting it up, then changing the BIOS so it's set as my A: drive, I tried to format a couple of high-density 1.2MB floppy disks using the "format A:" command in Command Prompt. Both times it formatted only 160KB and left it at that. If I then check the amount of space on those disks, it then comes up as 160KB. Why is this the case? How can I get my the full value out of my 1.2MB? For reference, I have a Mitsubishi MF504C-318UG, which should support 1.2MB disks.

  Read the article

• The Best How-To Geek Articles for November 2012

  - by Asian Angel

  Last month we covered topics such as why 64-bit Windows needs a separate “Program Files (x86)” folder, how to uninstall your Windows product key before selling your PC, how to deal with locked files in Windows, and more. Join us as we look back at the best articles for November. HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

  Read the article

• Oracle Linux Events in December

  - by Zeynep Koch

  December will be a busy month for Oracle Linux team. We will be showcasing Oracle Linux and Oracle VM in conferences all around the world. Here's a list of December events we will showcase Oracle Linux: Gartner Data Center – North America Oracle will have a session and booth - Register today Dec 3-6, Las Vegas, USA 0 0 1 66 377 Oracle Corporation 3 1 442 14.0 96 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Oracle Open World Latin America Oracle OpenWorld Latin America December 4–6, Sao Paulo, Brazil 0 0 1 25 145 Oracle Corporation 1 1 169 14.0 96 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} HP Discover EMEA HP Discover – EMEA December 4 – 6, Messe Frankfurt, Germany (Oracle Platinum sponsor) 0 0 1 41 239 Oracle Corporation 1 1 279 14.0 96 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Oracle Superior Solutions and Cost Savings with Oracle Linux and Oracle VM See Location Details and register Dec 4 Kansas City and Tampa Dec 6 Milwaukee and Miami Dec 11 Washington, DC Dec 13 Raleigh Visit our booth and you can grab an Oracle Linux/Oracle VM DVD Kit and talk to Oracle Linux experts.

  Read the article

• Algorithm to Sort member into groups

  - by kasmanit

  I'll have to develop an application which the final purpose is to sort all the member into groups. Each group will have the same size. And I had to put the members into the groups several times during the execution of the program. To put the member into the groups, a lot of critria are to be look at, because we do not want that two people are put again together two time in the same execution of the program, of course if it's the only way to find a correct solution, it' fine, and there is a lot of other criteria, like some people can be willing to be always with another member. So to resume, we have n members to put in groups of size 8. After the first "round" we have to do again the algorithm to sort them differently. And a lot of critria may go in the calculation of the priority of each member Do you have any idea?

  Read the article

• Why doesn't Haskell have type-level lambda abstractions?

  - by Petr Pudlák

  Are there some theoretical reasons for that (like that the type checking or type inference would become undecidable), or practical reasons (too difficult to implement properly)? Currently, we can wrap things into newtype like newtype Pair a = Pair (a, a) and then have Pair :: * -> * but we cannot do something like ?(a:*). (a,a). (There are some languages that have them, for example, Scala does.)

  Read the article

• Replicate GAE Datastore On A Server LAN in Java

  - by Franz Noel

  There may be instances wherein one Company Client may not have internet connection on their vicinity. Either their Internet Service Provider currently experience a down time or there are some other problems involving the network, but not their LAN. GAE seems to be needing a connection at all times in the internet. I only need GAE Datastore. I'm thinking about a different application. Creating a Java Swing Client, for instance, and connecting to the Office Server via HRD of GAE Datastore. When I tried to check on the solutions for Java, it does not say anything about uploading all data and I do not need the App. I just need the GAE Datastore. In Java GAE, only indexes can be able to be manipulated. So, is there any tricks/ideas that you can use HRD with GAE Datastore on Java with an Internal Office Server combined? This way, it may provide service even during network down times. (Can somebody create me a tag of gae-datastore, please.)

  Read the article

• How to create Button/Switch-Like Tile where you can step on it and change its value?

  - by aldroid16

  If the player steps on a Button-Tile when its true, it becomes false. If the player steps on a Button-Tile when it is false, it becomes true. The problem is, when the player stands on (intersects) the Button-Tile, it will keep updating the condition. So, from true, it becomes false. Because its false and the player intersects it, it becomes true again. True-false-true-false and so on. I use ElapsedGameTime to make the updating process slower, and the player can have a chance to change the Button to true or false. However, it's not the solution I was looking for. Is there any other way to make it keep in False/True condition while the Player is standing on the Button tile?

  Read the article

• Who is likely to need the most this high-quality, measurable, reliable approach to software? [closed]

  - by Marek Cruz

  Software engineering is the application of principles of engineering to software. Trouble is, most of those who like to flatter with the title "software engineer" don't do that. They just keep writing code and patching it until it's stable enough to foist off on users. That's not software engineering. Who is likely to need the most the practice of software engineering? (with all the project planning, requirements engineering, software design, implementation based on the design, testing, deployment, awareness of IEEE standards, metrics, security, dependability, usability, etc.)

  Read the article

• Is there a rule of thumb for what a bing map's zoom setting should be based on how many miles you want to display?

  - by Clay Shannon

  If a map contains pushpins/waypoints that span only a couple of miles, the map should be zoomed way in and show a lot of detail. If the pushpins/waypoints instead cover vast areas, such as hundreds or even thousands of miles, it should be zoomed way out. That's clear. My question is: is there a general guideline for mapping (no pun intended) Bing Maps zoom levels to a particular number of miles that separate the furthest apart points? e.g., is there some chart that has something like: Zoom level N shows 2 square miles Zoom level N shows 5 square miles etc.?

  Read the article

• algorithm for project euler problem no 18

  - by Valentino Ru

  Problem number 18 from Project Euler's site is as follows: By starting at the top of the triangle below and moving to adjacent numbers on the row below, the maximum total from top to bottom is 23. 3 7 4 2 4 6 8 5 9 3 That is, 3 + 7 + 4 + 9 = 23. Find the maximum total from top to bottom of the triangle below: 75 95 64 17 47 82 18 35 87 10 20 04 82 47 65 19 01 23 75 03 34 88 02 77 73 07 63 67 99 65 04 28 06 16 70 92 41 41 26 56 83 40 80 70 33 41 48 72 33 47 32 37 16 94 29 53 71 44 65 25 43 91 52 97 51 14 70 11 33 28 77 73 17 78 39 68 17 57 91 71 52 38 17 14 91 43 58 50 27 29 48 63 66 04 68 89 53 67 30 73 16 69 87 40 31 04 62 98 27 23 09 70 98 73 93 38 53 60 04 23 NOTE: As there are only 16384 routes, it is possible to solve this problem by trying every route. However, Problem 67, is the same challenge with a triangle containing one-hundred rows; it cannot be solved by brute force, and requires a clever method! ;o) The formulation of this problems does not make clear if the "Traversor" is greedy, meaning that he always choosed the child with be higher value the maximum of every single walkthrough is asked The NOTE says, that it is possible to solve this problem by trying every route. This means to me, that is is also possible without! This leads to my actual question: Assumed that not the greedy one is the max, is there any algorithm that finds the max walkthrough value without trying every route and that doesn't act like the greedy algorithm? I implemented an algorithm in Java, putting the values first in a node structure, then applying the greedy algorithm. The result, however, is cosidered as wrong by Project Euler. sum = 0; void findWay(Node node){ sum += node.value; if(node.nodeLeft != null && node.nodeRight != null){ if(node.nodeLeft.value > node.nodeRight.value){ findWay(node.nodeLeft); }else{ findWay(node.nodeRight); } } }

  Read the article

• Tomcat 7 vs. ehCache Standalone Server (Glassfish) Configuration with RESTful Web Services

  - by socal_javaguy

  My requirements consist of using ehCache to send and store data via RESTful web service calls. The data can be stored in-memory or via the filesystem... Never used ehCache before so I am having some issues deciding on which bundle to use. Have downloaded the following bundles: ehcache-2.6.2 ehcache-standalone-server-1.0.0 (1) What is the difference between the two? It seems the ehcache-2.6.2 contains src and binaries, which essentially enables one to bundle it with their webapps (by putting the compiled jar or binaries inside the webapp's WEB-INF/lib folder). But it doesn't seem that it has support for Restful web services. Whereas, ehcache-standalone-server-1.0.0 (comes with an embedded Glassfish server and has support for REST & SOAP) can be used to run as a standalone server. If I my answers to my own question are correct, then that means, I should just use the standalone server? (2) My requirements are to setup ehCache (with REST support) on Tomcat 7. So, how could I setup ehCache on Tomcat 7 as a separate app with REST & SOAP support? Thank you for taking the time to read this...

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >