Monthly Archives

Articles indexed in January 2011

Page 445/604 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

• Why do firewire drives on Mac OS cause processes to go into uninterruptible wait?

  - by akraut

  I have a Western Digital My Passport Studio external hard drive. It works with either Firewire 800 or USB 2.0. I've noticed that when I have it connected to Firewire, after a few hours, processes on my Mac start to go into an uninterruptible wait state. Eventually the system becomes so hard locked that I can't even shut it down. I have Spotlight indexing of the drive disabled, and the mds process seems to be the one that triggers this eventual system collapse.

  Read the article

• Use both OpenVPN & eth0 together

  - by shadyabhi

  I connect to a VPN using openVPN. Now, after the connection is established, all my traffic goes through tun0. My LAN gateway is 10.100.98.4... So, for apps to use my direct internet connnection I did sudo route add default gw 10.100.98.4 But, I cant use tun0 now. I know this because curl --interface tun0 google.com doesnt give me anything.. How do I go about using both connections simultaneously. How can I achieve that? ROUTING TABLES:- Without VPN running:- Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 With VPN:- Destination Gateway Genmask Flags Metric Ref Use Iface 10.10.0.1 10.10.54.230 255.255.255.255 UGH 0 0 0 tun0 10.10.54.230 * 255.255.255.255 UH 0 0 0 tun0 free-vpn.torvpn 10.100.98.4 255.255.255.255 UGH 0 0 0 eth0 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.10.54.230 0.0.0.0 UG 0 0 0 tun0 After the route command- Destination Gateway Genmask Flags Metric Ref Use Iface 10.10.0.1 10.10.54.230 255.255.255.255 UGH 0 0 0 tun0 10.10.54.230 * 255.255.255.255 UH 0 0 0 tun0 free-vpn.torvpn 10.100.98.4 255.255.255.255 UGH 0 0 0 eth0 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 default 10.10.54.230 0.0.0.0 UG 0 0 0 tun0

  Read the article

• VMWare Input/Output error on ubuntu host Win7 guest

  - by CShipley

  I am running ubuntu 10.10 as my host with Windows 7 as the guest. About a couple weeks ago I started getting error pop-ups from vmware reporting inability to read or write to a particular file. On futher investigation, I've noticed that I cannot copy that particular file from the linux command line even as root. I get the same input/output error. The SMART utility tells me I have 69 bad sectors on the disk (it is 1 TB) So my question is 1) How do I tell if that HD is going bad? 2) How can I move the VM files to a different part of the disk if I get read/write errors when I try to copy?

  Read the article

• Friday Fun: Splash Back

  - by Asian Angel

  The best part of the week has finally arrived, so why not take a few minutes to have some quick fun? In this week’s game you get to play with alien goo as you work to clear the game board and reach as high a level as possible Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Calvin and Hobbes Mix It Up in this Fight Club Parody [Video] Choose from 124 Awesome HTML5 Games to Play at Mozilla Labs Game On Gallery Google Translate for Android Updates to Include Conversation Mode and More Move Your Photoshop Scratch Disk for Improved Performance Winter Storm Clouds on the Horizon Wallpaper Existential Angry Birds [Video]

  Read the article

• Quels défis IT devront relever les entreprises en 2011 ? Le Cloud et la gestion de « l'explosion des données » selon Informatica

  Quels défis IT devront relever les entreprises en 2011 ? Le Cloud Computing et une gestion plus intelligentes de « l'explosion des données » selon Informatica A l'occasion du nouvel an, Mark Seager, Vice President Technology EMEA d'Informatica (fournisseur de solutions d'intégration de données) a publié un article fort intéressant sur les challenges auxquels doivent faire face les entreprises IT en 2011. Le succès retentissant des réseaux sociaux et l'usage sans précédent du Web en général en 2010 provoquera, selon lui, « l'explosion des données » (sic) en 2011 avec autant d'écueils à éviter que d'opportunités à saisir pour les entreprises. Les sociétés doiv...

  Read the article

• Oracle E-Business Suite (WebADI) integration with Oracle Open Office

  - by Harald Behnke

  Another highlight of the new Oracle Open Office Release 3.3 enterprise features is the Oracle E-Business Suite Release 12.1 (WebADI) integration. The WebADI integration in Oracle Open Office for Windows allows you to bring your Oracle E-Business Suite data into an Oracle Open Office Calc spreadsheet, where familiar data entry and modeling techniques can be used to complete your E-Business Suite tasks. You can create formatted spreadsheets on your desktop that allow you to download, view, edit, and create Oracle E-Business Suite data. Use data entry shortcuts (such as copying and pasting or dragging and dropping ranges of cells), or Calc's Open Document Format (ODF V1.2) compliant spreadsheet formulas, to calculate amounts to save time. You can combine speed and accuracy by invoking lists of values for fields within the spreadsheet. After editing the spreadsheet, you can use WebADI's validation functionality to validate the data before uploading it to the Oracle E-Business Suite. Validation messages are returned to the spreadsheet, allowing you to identify and correct invalid. This video shows a hands-on demonstration of the Oracle E-Business Suite integration: Read more about the Oracle Open Office enterprise features.

  Read the article

• When is it time to start afresh instead of trying to rewrite the existing project?

  - by gablin

  As projects grow and age and new features are introduced, there may come a time when it's probably better to start anew. Some features may require so much rewriting that it would be easier (and maybe faster) to just rewrite the whole thing from scratch. Also, then you have the opportunity to apply what you've learned from the first project and thus improve the code and design of the successor. Is there a way of recognizing when this time is? Is it just a gut feeling, or could you say that "after x years, you probably should start over", or some other rule of thumb?

  Read the article

• Software Tester to Developer [closed]

  - by Mayu Mayooresan

  Possible Duplicate: How do I become a developer? Its not a question related to programming but related to career. Last 2 and half year I've been working as a Software Tester and i'm seriously considering a track change to programmer. but the problems I think of is.. 1. My age (28) 2. My IT experience with Testing 3. Salary wont match if I change the track as I have to start from scrach. Wot do you think guys?? Please advice me. Is it better to change track or stay in Tester job?? I think I dont seem to like tester job. Please advice. Thanks in advance.

  Read the article

• After update, grub is broken.

  - by Bryan Allan

  Some months back I used wubi to install ubuntu on an hp laptop with vista. After not using it for a month or so, I loaded ubuntu and installed many updates (including kernel update). Windows boot manager loads without any problems, and I can boot to vista without problems. However, if I choose ubuntu, the screen briefly flashes Try (hd0,0) : NTFS5 and then goes to black. I never get to the kernel image selection screen.

  Read the article

• netsh http add urlacl problem

  - by BadCat914

  I'm trying to set up some ports from a WIX installer. For WinXP we use httpcfg in a custom action and this works fine. For Win7, we're trying: netsh http add urlacl url=http://127.0.0.1/8346/ user="NT AUTHORITY\Authenticated Users" sddl="D:(A;;GX;;;AU)" The WIX installer correctly executes this statement and sets up the ports - FOR THE ADMINISTRATOR who runs the .msi. Users with lesser priviliges cannot access these ports. I need to set it up for all users on the machine, but I've tried about everything I can think of with no luck. Something I find odd is that the Admin user can see the assigned ports using netstat -a, but they do not appear at all using netsh http show urlacl...is that an indicator of something wrong?

  Read the article

• XSLT, JSTL e JSF

  - by Paulo S.

  I have a xml file which I want to transform in a jsf code page. To do that I've created a xsl file. xml: <?xml version='1.0' encoding='ISO-8859-1'?> <questionario xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:noNamespaceSchemaLocation='Schema2.xsd'> <componente nome='input'> <id>input1</id> </componente> <componente nome='input'> <id>input2</id> </componente> </questionario> code: <%@ taglib uri="http://java.sun.com/jstl/core_rt" prefix="c" %> <%@ taglib uri="http://java.sun.com/jsp/jstl/xml" prefix="x" %> <c:set var="xml" value="${questionarioXSLBean.xml}"/> <c:set var="xsl"> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="2.0" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" exclude-result-prefixes="f h"> <xsl:template match="/"> <xsl:for-each select="questionario/componente"> <xsl:if test="attribute::nome = 'input'"> <xsl:variable name="id"> <xsl:value-of select="id" /> </xsl:variable> <h:inputText id="{$id}"/> </xsl:if> </xsl:for-each> </xsl:template> </xsl:stylesheet> </c:set> <x:transform xml="${xml}" xslt="${xsl}" /> The problem is that nothing is shown in my screen because the generated code for <h:inputText id="input1"/> is <h:inputText id="input_1" xmlns:h="http://java.sun.com/jsf/html"/> how can I replace the xmlns:h="http://java.sun.com/jsf/html" or suppress it. Thanks! Update: Let me clarify what I want to do. I want to generate a jsf page dynamically depending on the attributes of a xml file, for instance, 2 input texts, 3 check boxes, etc. To make the transformation to jsf I thought in two approaches, one using jstl and another using xslt. The problem with the former is that I couldn't integrate jstl with jsf code (to set jsf components attributes using jstl variables) and with the last approach, I'm facing the problem described above.I wouldn't like to create components in java (UIComponents). Any suggestions?

  Read the article

• .Net long-running scheduled code execution

  - by Prof Plum

  I am working on a couple of projects now where I really wish there was some sort of component that I could specify a time and date, and then execute some sort of method. DateTime date = new DateTime(x,x,x,x,x,x); ScheduledMethod sMethod = new ScheduledMethod(date, [method delegate of some sort]); \\at the specified date, sMethod invokes [method delegate of some sort] I know that I can do this with Windows Workflow Foundation as a long running process, which is good for certain things, but are there any alternatives? Workflow is not exactly straight forward with the details, and it would be nice to be able to deploy something more simple for light weight tasks. An example would be a method that checks a network folder once a day and deletes any files that are more than 30 days old. I realize that this may be pie in the sky dreaming, but this would be extremely useful for automating certain mundane maintinence tasks (scheduled sql operations, file system cleansing, routine email sending, etc.). It does not necessarily have to be .Net, but that is where I am coming from. Any ideas?

  Read the article

• How to print source code lines in python logger

  - by anon

  Is there some relatively simple way to programmatically include source code lines to python logger report. For example... import logging def main(): something_is_not_right = True logging.basicConfig(level=logging.DEBUG, format=('%(filename)s: ' '%(levelname)s: ' '%(funcName)s(): ' '%(lineno)d:\t' '%(message)s') ) if something_is_not_right == True: logging.debug('some way to get previous line of source code here?') So that output would look like this. example.py: DEBUG: main(): 14: if something_is_not_right == True:

  Read the article

• WCF DataContract GetCustomDataToExport

  - by JeffN825

  I'm trying to get the default behavior for a client referencing my WCF WSDL to set IsReference to true on the imported DataContracts. It looks like I should be able to use an IDataContractSurrogate with GetCustomDataToExport to accomplish this...which specifcally means adding the following to the generated ComplexType in the xsd associated with the WSDL: <xs:attribute ref="ser:Id" /> <xs:attribute ref="ser:Ref" /> There is, of course no usable documentation I can find from MS about how to use this method. The MSDN page says it should return an object...but does not indicate at all what type of object this should be....how useless... Before I go reflector'ing for this, does anyone out there know how to use this method? Thanks.

  Read the article

• NSMutableDictionary confused over how to use keys with certain code ?

  - by Jules

  I'm getting data from a database and I need to add the string field value and the record id. However, I need this to work with some existing code... I'm replacing this (see code below) and getting data from my database. NSDictionary *dict = [[NSDictionary alloc] initWithContentsOfFile:path]; self.allCategories = dict; [dict release]; But needs to work with these key and value search functions. - (void)resetSearch { NSMutableDictionary *allCategoriesCopy = [self.allCategories mutableDeepCopy]; self.Categories = allCategoriesCopy; [allCategoriesCopy release]; NSMutableArray *keyArray = [[NSMutableArray alloc] init]; [keyArray addObject:UITableViewIndexSearch]; [keyArray addObjectsFromArray:[[self.allCategories allKeys] sortedArrayUsingSelector:@selector(compare:)]]; self.keys = keyArray; [keyArray release]; } . - (void)handleSearchForTerm:(NSString *)searchTerm { NSMutableArray *sectionsToRemove = [[NSMutableArray alloc] init]; [self resetSearch]; for (NSString *key in self.keys) { NSMutableArray *array = [Categories valueForKey:key]; NSMutableArray *toRemove = [[NSMutableArray alloc] init]; for (NSString *name in array) { if ([name rangeOfString:searchTerm options:NSCaseInsensitiveSearch].location == NSNotFound) [toRemove addObject:name]; } if ([array count] == [toRemove count]) [sectionsToRemove addObject:key]; [array removeObjectsInArray:toRemove]; [toRemove release]; } [self.keys removeObjectsInArray:sectionsToRemove]; [sectionsToRemove release]; [table reloadData]; } Keep getting an error from this code... NSDictionary *arrayTmp= [[NSDictionary alloc] init]; ... loop records int cid = sqlite3_column_int(statementTMP, 0); NSString *category = [[NSString alloc] initWithUTF8String:(char *)sqlite3_column_text(statementTMP, 1)]; [arrayTmp setObject:category forKey:[NSString stringWithFormat:@"%i", cid]]; Error caused by line above * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSCFString count]: unrecognized selector sent to instance 0x4d4c500' * Call stack at first throw * ... end loop self.allCategories = arrayTmp; [arrayTmp release];

  Read the article

• Get smallest date for each element in access query

  - by skerit

  So I have a table containing different elements and dates. It basically looks like this: actieElement beginDatum 1 1/01/2010 1 1/01/2010 1 10/01/2010 2 1/02/2010 2 3/02/2010 What I now need is the smallest date for every actieElement. I've found a solution using a simple GROUP BY statement, but that way the query loses its scope and you can't change anything anymore. Without the GROUP BY statement I get multiple dates for every actieElement because certain dates are the same. I thought of something like this, but it also does not work as it would give the subquery more then 1 record: SELECT s1.actieElement, s1.begindatum FROM tblActieElementLink AS s1 WHERE (((s1.actieElement)=(SELECT TOP 1 (s2.actieElement) FROM tblActieElementLink s2 WHERE s1.actieElement = s2.actieElement ORDER BY s2.begindatum ASC)));

  Read the article

• HPUX setacl leaves uid behind

  - by Woot4Moo

  I have a shell script that I execute after uninstalling a web application. The script is meant to clean up permissions that were needed during the execution of the application. find /opt/path -exec setacl -d user:myUser{} ';' After this executes and the acl is removed I am left with an acl that looks as follows user:101:--- /opt/path How can I properly call setacl to remove the user without leaving behind a uid?

  Read the article

• How to column-ify an output from a certain program?

  - by mbaitoff

  I have a program that generates and outputs a sequence of simple sample math homework tasks, like: 1 + 1 = ... 3 + 3 = ... 2 + 5 = ... 3 + 7 = ... 4 + 2 = ... a sequence can be quite long, and I'd like to save space when this sequence is printed by converting it as follows: 1 + 1 = ... 3 + 7 = ... 3 + 3 = ... 4 + 2 = ... 2 + 5 = ... that is, wrapping the lines into the two or more columns. I was expecting the column linux utility to do the job using the -c N option witn N=2, however, it still outputs the lines in one column whatever the N is. How would I do the column-ifying of the sequence of lines?

  Read the article

• Why does using the Asynchronous Programming Model in .Net not lead to StackOverflow exceptions?

  - by uriDium

  For example, we call BeginReceive and have the callback method that BeginReceive executes when it has completed. If that callback method once again calls BeginReceive in my mind it would be very similar to recursion. How is that this does not cause a stackoverflow exception. Example code from MSDN: private static void Receive(Socket client) { try { // Create the state object. StateObject state = new StateObject(); state.workSocket = client; // Begin receiving the data from the remote device. client.BeginReceive( state.buffer, 0, StateObject.BufferSize, 0, new AsyncCallback(ReceiveCallback), state); } catch (Exception e) { Console.WriteLine(e.ToString()); } } private static void ReceiveCallback( IAsyncResult ar ) { try { // Retrieve the state object and the client socket // from the asynchronous state object. StateObject state = (StateObject) ar.AsyncState; Socket client = state.workSocket; // Read data from the remote device. int bytesRead = client.EndReceive(ar); if (bytesRead > 0) { // There might be more data, so store the data received so far. state.sb.Append(Encoding.ASCII.GetString(state.buffer,0,bytesRead)); // Get the rest of the data. client.BeginReceive(state.buffer,0,StateObject.BufferSize,0, new AsyncCallback(ReceiveCallback), state); } else { // All the data has arrived; put it in response. if (state.sb.Length > 1) { response = state.sb.ToString(); } // Signal that all bytes have been received. receiveDone.Set(); } } catch (Exception e) { Console.WriteLine(e.ToString()); } }

  Read the article

• jquery dynamically added checkbox not working with change() function

  - by estern

  I dynamically load in a few li's that have a label and a checkbox in them to another visible ul. I set the checkboxes to be checked="checked" and i am trying to trigger an event to happen when i change these dynamically inserted checkboxes but nothing occurs. Here is the jquery: $(".otherProductCheckbox:checkbox").change( function(){ alert('test'); }); Here is the html for the dynamically added li's: <li class="otherProduct"><input type="checkbox" class="otherProductCheckbox radioCheck" checked="checked"/><label>Product Name</label></li> Any idea why i cant get the alert to happen when the checkbox changes its checked state?

  Read the article

• CSS3PIE issues in IE6 and 8

  - by Gordon

  I'm using CSS3PIE to apply some rounded corners to elements in Internet Explorer that will get them by stylesheet in other browsers. I've run into some issues with it though. In IE8, I discovered that any element that had the PIE behaviour would behave strangely. The container would jump a few pixels to the right, but the content would stay in its original position, giving the appearance that the content had all shifted left relative to its container. This would be especially problematic on elements with no or small amounts of padding. I was able to hack my way around the problem in IE8 by using X-UA-Compatible, but I'd rather avoid this solution if at all possible. I don't have access to IE9 for testing but my understanding hacks like PIE aren't necessary and it would be wasteful to force a compatibility mode in a browser that doesn't need it. I have worse issues in IE6, with the PIE layout breaking down completely on a list that is set up to use display:inline; zoom:1; list items (to simulate inline-block, which works in IE8 and the other browsers). Here the borders of the list items get rendered in completely the wrong place. So ideally, I'd like to have PIE work properly in IE6, and in IE8 without having to resort to compatibility mode. As far as IE6 goes, a graceful fallback where PIE is just not applied will do. IE7 is the only browser where the page displays as intended. I can't provide an example page just at the moment unfortunately, I can add one later though. Follow up: Here are some screen grabs made with IE Tester. I'm hoping they will make things a little more clear for everybody. As you can see, IE7 is fine. However, in IE8, the containers are offset to the left relative to their content, and in IE6 the list elements (with the rounded 1 pixel border) are a complete mess! Full size versions for IE8, IE7 and IE6 are also available

  Read the article

• Iphone calendar integrating problem

  - by Rkm

  I am integrating calendar to my application , after adding calendar i am getting error , please help me anyone where it is problem . "_OBJC_CLASS_$_KalViewController", referenced from: objc-class-ref-to-KalViewController in FertilityAppAppDelegate.o "_KalDataSourceChangedNotification", referenced from: _KalDataSourceChangedNotification$non_lazy_ptr in EventKitDataSource.o (maybe you meant: _KalDataSourceChangedNotification$non_lazy_ptr) "_OBJC_CLASS_$_EKEventViewController", referenced from: objc-class-ref-to-EKEventViewController in FertilityAppAppDelegate.o

  Read the article

• NoSuchMessageException: No message found

  - by adisembiring

  Hi .... I try to learn Spring MVC 3.0 validation. but I got NoSuchMessageException: No message found under code 'name.required' for locale 'en_US' error message when form submted. I have create message.properties in src/message.properties and the content of that file is: name.required = User Name is required password.required = Password is required gender.required = Gender is required I have set ResourceBundleMessageSource in my app-servlet.xml <bean id="messageSource" class="org.springframework.context.support.ResourceBundleMessageSource" p:basename="messages" /> My validator code is: @Component("registrationValidator") public class RegistrationValidator implements Validator { @Override public boolean supports(Class<?> clazz) { return RegistrationCommand.class.isAssignableFrom(clazz); } @Override public void validate(Object target, Errors errors) { RegistrationCommand registrationCommand = (RegistrationCommand) target; ValidationUtils.rejectIfEmptyOrWhitespace(errors, "name", "name.required"); ValidationUtils.rejectIfEmptyOrWhitespace(errors, "password", "password.required"); ValidationUtils.rejectIfEmpty(errors, "gender", "gender.required"); ValidationUtils.rejectIfEmpty(errors, "country", "country.required"); //ValidationUtils.rejectIfEmpty(errors, "community", "community.required"); ValidationUtils.rejectIfEmptyOrWhitespace(errors, "description", "description.required"); if (registrationCommand.getCommunity().length == 0) { errors.rejectValue("community", "community.required"); } } } and JSP Page is: <form:form commandName="registrationCommand"> <p class="name"> <label for="name">Name</label> <form:input path="name" /> <form:errors path="name" cssClass="error"></form:errors> </p> <p class="password"> <label for="password">Password</label> <form:password path="password" /> <form:errors path="password" cssClass="error"></form:errors> </p> <p class="gender"> <label>Gender</label> <form:radiobutton path="gender" value="M" label="M" /> <form:radiobutton path="gender" value="F" label="F" /> <form:errors path="gender" cssClass="error"></form:errors> </p> <p class="submit"> <input type="submit" value="Submit" /> </p> </form:form>

  Read the article

• Acessing a struct member, using a pointer to a vector of structs. Error:base operand of '->' has non-pointer type

  - by Matt Munson

  #include <iostream> #include <vector> using namespace std; struct s_Astruct { vector <int> z; }; int main () { vector <s_Astruct> v_a; for(int q=0;q<10;q++) { v_a.push_back(s_Astruct()); for(int w =0;w<5;w++) v_a[q].z.push_back(8); } vector <s_Astruct> * p_v_a = & v_a; cout << p_v_a[0]->z[4]; //error: base operand of '->' has non-pointer type //'__gnu_debug_def::vector<s_Astruct, std::allocator<s_Astruct> >' } There seems to be some issue with this sort of operation that I don't understand. In the code that I'm working on I actually have things like p_class-vector[]-vector[]-int; and I'm getting a similar error.

  Read the article

• PowerShell 2.0 and how to handle exceptions ?

  - by Primoz

  Why I get error message printed on the console when running these two simple samples ? I want that I get "Error testing :)" printed on the console insted of: Get-WmiObject : The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) At line:3 char:15 + Get-WmiObject <<<< -ComputerName possibly.nonexisting.domain.com -Credential (Get-Credential) -Class Win32_logicaldisk + CategoryInfo : InvalidOperation: (:) [Get-WmiObject], COMException + FullyQualifiedErrorId : GetWMICOMException,Microsoft.PowerShell.Commands.GetWmiObjectCommand or Attempted to divide by zero. At line:3 char:13 + $i = 1/ <<<< 0 + CategoryInfo : NotSpecified: (:) [], ParentContainsErrorRecordException + FullyQualifiedErrorId : RuntimeException First example: try { $i = 1/0 Write-Host $i } catch [Exception] { Write-Host "Error testing :)" } Second example: try { Get-WmiObject -ComputerName possibly.nonexisting.domain.com -Credential (Get-Credential) -Class Win32_logicaldisk } catch [Exception] { Write-Host "Error testing :)" } Thank you very much!

  Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >