Monthly Archives

Articles indexed in January 2011

Page 458/604 | < Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465  | Next Page >

  • Why does my flash video get stuck? (not lag?)

    - by Sk606
    After moving to Ubuntu 10.10 Netbook Edition, I've noticed a strange problem that manifests itself most obviously with streaming videos like youtube and hulu. The video will load and begin playing fine and eventually stop, as though it is buffering. However, it usually happens between 40 and 60 seconds into the clip. The loading indication however shows that it actually isn't buffering anymore of the data, and will just sit there. If I force the clip forward (e.g. click to start the movie somewhere ahead of the stall point) the clip will usually reload quickly and begin playing as expected. Because of the quick load times, and the consistent stop of video, I don't think the problem is related to hardware performance or network throughput. Also, I have none of these problems in 10.04. Rebooting into 10.04 makes the problem disappear. However, one more clue, I also have noticed a higher occurrence of web pages that simply "stop loading" - say, 1/10 clicks while browsing I have to hit "reload" to get the page to load because the page timed out part of the way through. This seems strangely related to the video problem, though is a lot less infuriating. Help! Where do I begin to look with a problem like this?

    Read the article

  • Most standard / Best way to keep the same top menu among different web pages?

    - by jsoldi
    What's the standard way to keep the same menu on top among different web pages without having to duplicate it on each page (I don't mean that it doesn't reload like when using frames and only loading the bottom part; I want the menu to scroll with the page when scrolling down, like this, this, this and pretty much every single web page that exists). I found this answer but the guy can't use Php and I can. Plus, I see several people giving different suggestions, but I assume there is a standard since pretty much every single web page in the whole web have a menu on top that stays the same among multiple pages . I'm just a newbie on web design (I can program Php and Html easily but I have no idea about standards and stuff like that since I'm self-taught guy ;)). What I would normally do is to include the menu with php but I'm not sure if this is the "standard".

    Read the article

  • What sort of things can cause a whole system to appear to hang for 100s-1000s of milliseconds?

    - by Ogapo
    I am working on a Windows game and while rendering, some computers will experience intermittent pauses ("hitches" for lack of a better term). When profiled they appear in seemingly random places in the code. Eventually I noticed that it wasn't just my process that was affected, but (seemingly) every process on the system. All of the threads in my application hitch at once. The CPU utilization drops during these hitches and it appears as if most processes make no progress. This leads me to believe this may be an Operating System or Driver issue, but it only occurs while playing the game (and only on some systems). What sort of operations might the operating system be doing that would require the kernel to pause all user threads and block. Some kind of I/O? At first I thought of paging but my impression is that would only affect a single process, no? Some systems in use: Windows, DirectX (3d), nVidia cards (unknown if replicates on ATI), using overlapped io for streaming

    Read the article

  • Implementing my Entity System. Questions about some problems I have found.

    - by Notbad
    Hi!, Well during this week I have deciding about implementation of my entity system. It is a big topic so it has been difficult to take one option from the whole. This has been my decision: 1) I don't have an entity class it is just an id. 2) I have systems that contain a list of components (the list is homegenous, I mean, RenderSystem will just have RenderComponents). 3) Compones will be just data. 4) There would be some kind of "entity prototypes" in a manager or something from we will create entity instances.Ideally they will define the type of components it has and initialization data. 5) Prototype code to create an entity (this is from the top of my head): int id=World::getInstance()->createEntity("entity template"); 6) This will notify all systems that a new entity has been created, and if the entity needs a component that the system handles it will add it to the entity. Ok, this are the ideas. Let's see if some can help with the problems: 1) The main problem is this templates that are sent to the systems in creation process to populate the entity with needed components. What would you use, an OR(ed) int?, a list of strings?. 2) How to do initialization for components when the entity has been created? How to store this in the template? I have thought about having a function in the template that is virtual and after entity is created an populated, gets the components and sets initialization values. 3) Don't you think this is a lot of work for just an entity creation?. Sorry for the long post, I have tried to expose my ideas and finding in order other could have a start beside exposing my problems. Thanks in advance, Notbad.

    Read the article

  • Loading and drawing materials using Lib3ds

    - by Dfowj
    Hey all, i'm currently using Lib3ds to load models into my C++/OpenGL project. So far, i've been follow the model loading tutorial found here. The tutorial gives a good example of how to draw the vertices and normals using VBO's, but so far i've been lost as how to do the same thing with materials. Could i get an explanation/example of how to both load and draw materials of my meshes using Lib3ds and OpenGL?

    Read the article

  • Ping broadcast on Win XP SP3

    - by PaulH
    I'm trying to ping the broadcast address 255.255.255.255 on WinXP SP3. If I use the command line, I get host error: C:\>ping 255.255.255.255 Ping request could not find host 255.255.255.255. Please check the name and try again. If I try a C++ program using the iphlpapi, IcmpSendEcho() fails and GetLastError returns 11010 IP_REQ_TIMED_OUT. HANDLE h = ::IcmpCreateFile(); IPAddr broadcast = inet_addr( "255.255.255.255" ); BYTE payload[ 32 ] = { 0 }; IP_OPTION_INFORMATION option = { 255, 0, 0, 0, 0 }; // a buffer with room for 32 replies each containing the full payload std::vector< BYTE > replies( 32 * ( sizeof( ICMP_ECHO_REPLY ) + 32 ) ); DWORD res = ::IcmpSendEcho( h, broadcast, payload, sizeof( payload ), &option, &replies[ 0 ], replies.size(), 1000 ); ::IcmpCloseHandle( h ); I can ping the local broadcast 192.168.0.255 with no problem. What do I need to do to ping the global broadcast? Thanks, PaulH

    Read the article

  • nhibernate sessionfactory instance more than once on web service

    - by Manuel
    Hello, i have a web service that use nhibernate. I have a singleton pattern on the repositorry library but on each call the service, it creates a new instance of the session factory wich is very expensive. What can i do? region Atributos /// <summary> /// Session /// </summary> private ISession miSession; /// <summary> /// Session Factory /// </summary> private ISessionFactory miSessionFactory; private Configuration miConfiguration = new Configuration(); private static readonly ILog log = LogManager.GetLogger(typeof(NHibernatePersistencia).Name); private static IRepositorio Repositorio; #endregion #region Constructor private NHibernatePersistencia() { //miConfiguration.Configure("hibernate.cfg.xml"); try { miConfiguration.Configure(); this.miSessionFactory = miConfiguration.BuildSessionFactory(); this.miSession = this.SessionFactory.OpenSession(); log.Debug("Se carga NHibernate"); } catch (Exception ex) { log.Error("No se pudo cargar Nhibernate " + ex.Message); throw ex; } } public static IRepositorio Instancia { get { if (Repositorio == null) { Repositorio = new NHibernatePersistencia(); } return Repositorio; } } #endregion #region Propiedades /// <summary> /// Sesion de NHibernate /// </summary> public ISession Session { get { return miSession.SessionFactory.GetCurrentSession(); } } /// <summary> /// Sesion de NHibernate /// </summary> public ISessionFactory SessionFactory { get { return this.miSessionFactory; } } #endregion In wich way can i create a single instance for all services?

    Read the article

  • How to overlay audio file on .wmv video file using c#?

    - by Vipul jain
    Hello, I want to record video and audio files using C#. After recording of audio + video i want to merge them. There can be only one video file and 10 audio file. I want this ten files to overlay on one video file. I am assure that i want video file in .wmv format. Can you tell me i should record audios in which format so later i can overlay those audio files on .wmv format video file? Also please let me know how to overlay audio file on .wmv video file? Hope i will get prompt reply for this

    Read the article

  • Adding animation to my images with JQuery

    - by slandau
    Here is my home page: <%@ Page Language="C#" MasterPageFile="~/Views/Home/Home.Master" Inherits="System.Web.Mvc.ViewPage" %> <asp:Content ID="Content2" ContentPlaceHolderID="IndicationContentPlaceHolder" runat="server"> <table id="home" style="margin-left: auto; margin-right:auto;"> <td id="homeLinks"> <div style="padding-left:35px;" id="homeListing" class="containerMid"> <div id="homeView"> <table style="margin-left: auto; margin-right:auto;"> <tr> <tr> <td id="btnIcOld" style="text-align:center;cursor:pointer;"> <img src="<%= VirtualPathUtility.ToAbsolute("~/img/chic/Load.png")%>" /> </td> <td id="btnIc" style="text-align:center;cursor:pointer;"> <img src="<%= VirtualPathUtility.ToAbsolute("~/img/chic/Bar_Chart.png")%>" /> </td> <td id="btnPricing" style="text-align:center;cursor:pointer;"> <img src="<%= VirtualPathUtility.ToAbsolute("~/img/chic/Pie_Chart_disabled.png")%>" /> </td> <td id="btnSheets" style="text-align:center;cursor:pointer;"> <img src="<%= VirtualPathUtility.ToAbsolute("~/img/chic/Line_Chart_disabled.png")%>" /> </td> <td id="btnPort" style="text-align:center;cursor:pointer;"> <img src="<%= VirtualPathUtility.ToAbsolute("~/img/chic/Modify_disabled.png")%>" /> </td> <td id="btnAdmin" style="text-align:center;cursor:pointer;"> <img src="<%= VirtualPathUtility.ToAbsolute("~/img/chic/Profile_disabled.png")%>" /> </td> </tr> <tr> <td id="Td1"> <b>Indications Calculator | </b> </td> <td id="lblIc"> <b>Indications Calculator - Beta | </b> </td> <td id="lblPricing"> <b>Managing Pricing Triggers | </b> </td> <td id="lblSheets"> <b>Creating Pricing Sheets | </b> </td> <td id="lblPort"> <b>Portfolio Analysis | </b> </td> <td id="lblAdmin"> <b>Administration</b> </td> </tr> </tr> </table> </div> </div> </td> </table> <div id="pageMessage"></div> <script> $(document).ready(function () { $('#btnIc').live('click', function () { window.location.href = "<%=Url.Action("Indications") %>"; }); $('#btnIcOld').live('click', function () { window.location.href = 'https://extranetint/swap'; }); $('#btnPricing').live('click', function () { //window.location.href = "<%=Url.Action("Triggers") %>"; }); $('#btnSheets').live('click', function () { //window.location.href = "<%=Url.Action("Sheets") %>"; }); $('#btnPort').live('click', function () { //window.location.href = "<%=Url.Action("Analysis") %>"; }); $('#btnAdmin').live('click', function () { //window.location.href = "<%=Url.Action("Admin") %>"; }); }); </script> </asp:Content> How can I, with JQuery (or really anything), achieve a mouse-over effect on my images where they will grow a little bit as you hover over them? I tried using JQuery animate but for some reason I couldn't get it to work. Thanks!

    Read the article

  • Printing and exporting from Crystal Reports Viewer throws error

    - by MAW74656
    I'm using the .net Crystal Reports viewer to display a report. This works properly, but when I click on the print option, and then click "OK" on the options popup, I get the following error: Access is denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: Access is denied. And the same thing when I try to export. I'm running this on the Visual Studio development server, VS2008. What can I do to correct this?

    Read the article

  • Execution plan issue requires reset on SQL Server 2005, how to determine cause?

    - by Tony Brandner
    We have a web application that delivers training to thousands of corporate students running on top of SQL Server 2005. Recently, we started seeing that a single specific query in the application went from 1 second to about 30 seconds in terms of execution time. The application started throwing timeouts in that area. Our first thought was that we may have incorrect indexes, so we reviewed the tables and indexes. However, similar queries elsewhere in the application also run quickly. Reviewing the indexes showed us that they were configured as expected. We were able to narrow it down to a single query, not a stored procedure. Running this query in SQL Studio also runs quickly. We tried running the application in a different server environment. So a different web server with the same query, parameters and database. The query still ran slow. The query is a fairly large one related to determining a student's current list of training. It includes joins and left joins on a dozen tables and subqueries. A few of the tables are fairly large (hundreds of thousands of rows) and some of the other tables are small lookup tables. The query uses a grouping clause and a few where conditions. A few of the tables are quite active and the contents change often but the volume of added rows doesn't seem extreme. These symptoms led us to consider the execution plan. First off, as soon as we reset the execution plan cache with the SQL command 'DBCC FREEPROCCACHE', the problem went away. Unfortunately, the problem started to reoccur within a few days. The problem has continued to plague us for awhile now. It's usually the same query, but we did appear to see the problem occur in another single query recently. It happens enough to be a nuisance. We're having a heck of a time trying to fix it since we can't reproduce it in any other environment other than production. I have downloaded the High Availability guide from Red Gate and I read up more on execution plans. I hope to run the profiler on the live server, but I'm a bit concerned about impact. I would like to ask - what is the best way to figure out what is triggering this problem? Has anyone else seen this same issue?

    Read the article

  • Efficient algorithm to find first available name

    - by Avrahamshuk
    I have an array containing names of items. I want to give the user the option to create items without specifying their name, so my program will have to supply a unique default name, like "Item 1". The challenge is that the name has to be unique so i have to check all the array for that default name, and if there is an item with the same name i have to change the name to be "Item 2" and so on until i find an available name. The obvious solution will be something like that: String name; for (int i = 0 , name = "Item " + i ; !isAvailable(name) ; i++); My problem with that algorithm is that it runs at O(N^2). I wonder if there is a known (or new) more efficient algorithm to solve this case. In other words my question is this: Is there any algorithm that finds the first greater-than-zero number that dose NOT exist in a given array, and runs at less that N^2? Thanks!

    Read the article

  • Why does Android Account & Sync reboot when trying to find my settings activity?

    - by mobibob
    I have an activity that I can declare as Launcher category and it launches just fine from the home screen. However, when I try to hook-up the same activity into my SyncAdapter's settings activity and open it from the Accounts & Sync page - MySyncAdapter - (touch account listing) it aborts with a system fatal error (reboots phone). Meanwhile, my SyncAdapter is working other respects. Here is the log at point of impact: 01-13 12:31:00.976 5024 5038 I ActivityManager: Starting activity: Intent { act=android.provider.Settings.ACTION_SYNC_SETTINGS flg=0x10000000 cmp=com.myapp.android.syncadapter.ui/SyncAdapterSettingsActivity.class (has extras) } 01-13 12:31:00.985 5024 5038 E AndroidRuntime: *** FATAL EXCEPTION IN SYSTEM PROCESS: android.server.ServerThread 01-13 12:31:00.985 5024 5038 E AndroidRuntime: android.content.ActivityNotFoundException: Unable to find explicit activity class {com.myapp.android.syncadapter.ui/SyncAdapterSettingsActivity.class}; have you declared this activity in your AndroidManifest.xml? 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at android.app.Instrumentation.checkStartActivityResult(Instrumentation.java:1404) 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at android.app.Instrumentation.execStartActivity(Instrumentation.java:1378) 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at android.app.ContextImpl.startActivity(ContextImpl.java:622) 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at android.preference.Preference.performClick(Preference.java:828) 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at android.preference.PreferenceScreen.onItemClick(PreferenceScreen.java:190) 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at android.widget.AdapterView.performItemClick(AdapterView.java:284) 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at android.widget.ListView.performItemClick(ListView.java:3382) 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at android.widget.AbsListView$PerformClick.run(AbsListView.java:1696) 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at android.os.Handler.handleCallback(Handler.java:587) 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at android.os.Handler.dispatchMessage(Handler.java:92) 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at android.os.Looper.loop(Looper.java:123) 01-13 12:31:00.985 5024 5038 E AndroidRuntime: at com.android.server.ServerThread.run(SystemServer.java:517) 01-13 12:31:00.985 5024 5038 I Process : Sending signal. PID: 5024 SIG: 9 01-13 12:31:01.005 5019 5019 I Zygote : Exit zygote because system server (5024) has terminated 01-13 12:31:01.015 1211 1211 E installd: eof Here is a snippet from my manifest file: <activity android:name="com.myapp.android.syncadapter.ui.SyncAdapterSettingsActivity" android:label="@string/title_settings" android:windowSoftInputMode="stateAlwaysHidden|adjustPan"> <intent-filter> <action android:name="android.intent.action.VIEW" /> <action android:name="android.intent.action.MAIN" /> <action android:name="android.provider.Settings.ACTION_SYNC_SETTINGS"/> <category android:name="android.intent.category.DEFAULT" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity>

    Read the article

  • [c#] SoundPlayer.PlaySync stopping prematurely

    - by JeffE
    I want to play a wav file synchronously on the gui thread, but my call to PlaySync is returning early (and prematurely stopping playback). The wav file is 2-3 minutes. Here's what my code looks like: //in gui code (event handler) //play first audio file JE_SP.playSound("example1.wav"); //do a few other statements doSomethingUnrelated(); //play another audio file JE_SP.playSound("example2.wav"); //library method written by me, called in gui code, but located in another assembly public static int playSound(string wavFile, bool synchronous = true, bool debug = true, string logFile = "", int loadTimeout = FIVE_MINUTES_IN_MS) { SoundPlayer sp = new SoundPlayer(); sp.LoadTimeout = loadTimeout; sp.SoundLocation = wavFile; sp.Load(); switch (synchronous) { case true: sp.PlaySync(); break; case false: sp.Play(); break; } if (debug) { string writeMe = "JE_SP: \r\n\tSoundLocation = " + sp.SoundLocation + "\r\n\t" + "Synchronous = " + synchronous.ToString(); JE_Log.logMessage(writeMe); } sp.Dispose(); sp = null; return 0; } Some things I've thought of are the load timeout, and playing the audio on another thread and then manually 'freeze' the gui by forcing the gui thread to wait for the duration of the sound file. I tried lengthening the load timeout, but that did nothing. I'm not quite sure what the best way to get the duration of a wav file is without using code written by somebody who isn't me/Microsoft. I suppose this can be calculated since I know the file size, and all of the encoding properties (bitrate, sample rate, sample size, etc) are consistent across all files I intend to play. Can somebody elaborate on how to calculate the duration of a wav file using this info? That is, if nobody has an idea about why PlaySync is returning early. Of Note: I encountered a similar problem in VB 6 a while ago, but that was caused by a timeout, which I don't suspect to be a problem here. Shorter (< 1min) files seem to play fine, so I might decide to manually edit the longer files down, then play them separately with multiple calls.

    Read the article

  • How to programmatically insert call log entries WITH display name and photo?

    - by dchappelle
    I am able to programmatically insert an entry into the Android call log with a number, date, duration & type BUT I cannot figure out how to also include a photo, label and name? I do the following.. (didn't know what to even try for the photo) ContentValues values = new ContentValues(); values.put(CallLog.Calls.NUMBER, number); values.put(CallLog.Calls.CACHED_NAME, name); values.put(CallLog.Calls.CACHED_NUMBER_LABEL, label); values.put(CallLog.Calls.DATE, date); values.put(CallLog.Calls.DURATION, duration); values.put(CallLog.Calls.TYPE, myCallType); context.getContentResolver().insert(CallLog.Calls.CONTENT_URI, values);

    Read the article

  • Protobuf-net Deserialize Open Street Maps

    - by jonperl
    For the life of me I cannot deserialize the protobuf file from Open Street Maps. I am trying to deserialize the following extract: http://download.geofabrik.de/osm/north-america/us-northeast.osm.pbf to get Nodes and I am using http://code.google.com/p/protobuf-net/ as the library. I have tried to deserialize a bunch of different objects but they all come up null. The proto files can be found here: http://trac.openstreetmap.org/browser/applications/utils/export/osm2pgsql/protobuf Any suggestions?

    Read the article

  • Missing MethodInfo for overloaded function with different return type

    - by Charvak
    I have a class defined as follows interface ITest { List<T> Find<T>(int i); } class Test: ITest { public T List<T> Find<T>(int i) { return default(T); } List<T> ITest.Find<T>(int i) { return null; } } When I use typeof(Test).GetMethods() (both with and without appropriate BindingFlags) I do not get the MethodInfo for ITest.Find function. What is the best way of getting the MethodInfo for the missing method? Thanks

    Read the article

  • git contributors not showing up properly in github/etc.

    - by RobH
    I'm working in a team on a big project, but when I'm doing the merges I'd like the developers name to appear in github as the author -- currently, I'm the only one showing up since I'm merging. Context: There are 4 developers, and we're using the "integration manager" workflow using GitHub. Our "blessed" repo is under the organization, and each developer manages their pub/private repo. I've been tasked with being the integration manager, so I'm doing the merges, etc. Where I could be messing up is that I'm basically working out of my rob/project.git instead of the org/project.git -- so when I do local merges I operate on my repo then I push to both my public and the org public. (Make sense?) When I push to the blessed repo nobody else shows up as an author, since all commits are coming from me -- how can I get around this? -- Also, we all forked org/project.git, yet in the network graph nobody is showing up -- did we mess this up too? I'm used to working with git solo and don't have too much experience with handling a team of devs. Merging seems like the right thing to do, but I'm being thrown off since GitHub is kind of ignoring the other contributors. If this makes no sense at all, how do you use GitHub to manage a single project across 4 developers? (preferably the integration mgr workflow, branching i think would solve the problem) Thanks for any help

    Read the article

  • CSS with Aligned LI within a UL

    - by Alex
    I am trying to have some LIs within a UL align left, right, and center within a page. For the life of me, I can't figure out how to keep something "centered" on the same line as a left and right aligned LI. <style> ul { margin:1em 0; padding:0 } ul li{ display:inline-block; white-space:nowrap; margin:5px } ul li.left{ float: left; text-align:left; } ul li.center{ float:left; text-align: center; } ul li.right{ float: right; text-align:right; } </style> <ul> <li class="left">left</li> <li class="center">center</li> <li class="right">right</li> </ul> <ul> <li class="left">left</li> <li class="right">right</li> </ul> <ul> <li class="left">left</li> </ul> Can anyone help? BTW, I've trying to avoid DIVs. Thanks!

    Read the article

  • Cannot find the certificate

    - by user409756
    We get a T-SQL (SQL Server 2008 R2) error on BACKUP CERTIFICATE: ERROR_NUMBER 15151, SEVERITY 16, STATE 1, PROCEDURE -, LINE 8, MESSAGE: Cannot find the certificate 'certificate1', because it does not exist or you do not have permission. We can see the certificate in master.sys.certificates. Our pseudo-code: copy an unattached template_db to db1 attach db1 create certificate1 (in stored procedure in master db) generate @password CREATE DATABASE ENCRYPTION KEY … ENCRYPTION BY SERVER CERTIFICATE '+@certificate_name +… (in stored procedure in db1) turn on Transparent Database Encryption for db1 using certificate1. (N'ALTER DATABASE '+@db_name+N' SET ENCRYPTION ON') N’BACKUP CERTIFICATE '+@certificate_name+N' TO FILE = '''+@certificate_file_path+N''' WITH PRIVATE KEY ( FILE = '''+@private_key_file_path+N''', ENCRYPTION BY PASSWORD = '''+@password+N'''' To try to work-around the error, we tested three ways with the BACKUP CERTIFICATE code in a different databases each time, including db1 and master. All get the same error. Any ideas? Thanks.

    Read the article

  • Directories with random numbers as foldername being created that contain .ser files

    - by Dur4ndal
    Hi all: So in our server there are folders being generated with random names (such as "7nxxd", "tpy16q"). Inside each of these is the same subdirectory structure: <randomfilename>/.tld_cache/WEB-INF/tld/ c.tld/ fn.tld/ spring-form.tld/ fmt.tld/ spring.tld/ tiles-jsp.tld/ Each of these directories has 2 files: crc.ser and des.ser. Why are these files being created? Is there a way to specify the directory that they get written to besides the random name?

    Read the article

  • Why do I have to explicitly cast sometimes for varargs?

    - by Daniel Lew
    I've got a Class that uses reflection a lot, so I wrote a method to help out: private <T> T callMethod(String methodName, Class[] parameterTypes, Object[] args) { try { Class c = mVar.getClass(); Method m = c.getMethod(methodName, (Class[]) parameterTypes); return (T) m.invoke(mVar, args); } // Insert exception catching here [...] } This worked well for any method that had parameters, however I had to explicitly cast parameterTypes to Class[] in order for this to work for methods with no parameters (e.g., callMethod('funName', null, null);). I've been trying to figure out why this is the case. It seems to me that if parameterTypes, when null, had no concept of what type it is (Class[]), then I'd need to cast it for getMethod(). But if that's the case, why is getMethod() able to tell the difference between null, and (Class[]) null when the method is invoked?

    Read the article

  • Optimal sorting algorithm with modified cost... [closed]

    - by David
    The numbers are in a list that is not sorted and supports only one type of operation. The operation is defined as follows: Given a position i and a position j the operation moves the number at position i to position j without altering the relative order of the other numbers. If i j, the positions of the numbers between positions j and i - 1 increment by 1, otherwise if i < j the positions of the numbers between positions i+1 and j decreases by 1. This operation requires i steps to find a number to move and j steps to locate the position to which you want to move it. Then the number of steps required to move a number of position i to position j is i+j. Design an algorithm that given a list of numbers, determine the optimal(in terms of cost) sequence of moves to rearrange the sequence.

    Read the article

  • memcpy() safety on adjacent memory regions

    - by JaredC
    I recently asked a question on using volatile and was directed to read some very informative articles from Intel and others discussing memory barriers and their uses. After reading these articles I have become quite paranoid though. I have a 64-bit machine. Is it safe to memcpy into adjacent, non-overlapping regions of memory from multiple threads? For example, say I have a buffer: char buff[10]; Is it always safe for one thread to memcpy into the first 5 bytes while a second thread copies into the last 5 bytes? My gut reaction (and some simple tests) indicate that this is completely safe, but I have been unable to find documentation anywhere that can completely convince me.

    Read the article

  • Copying just the data from one Database to another

    - by monksy
    I'm not sure if this is the site for this question or not [if so put in the comment or vote to move it] How can I copy only the data from one database to another within the same server on SQL Server 2005? The two databases have the same schema but not the same data. I'm trying to get the data from one database to another. I am not able to restore from a snapshot [that screws over the security settings on the database]. I'm not able to use the import data wizard, because that is trying to copy over schema data as well.

    Read the article

< Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465  | Next Page >