Daily Archives

Articles indexed Tuesday June 28 2011

Page 5/13 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Percentage of computers on Internet behind a NAT?

  - by Mr.M

  I'm in a process of developing a server application and I would like to know if there are some numbers (or experience from people) on how many computers are behind the NAT on the Internet? Since my application is supposed to be a small server, being forced to implement UPNP support and TCP hole-punching with an external server may sway my determination, especially if more than 80% of the Internet is behind NAT.

  Read the article

• Do something by operator dial specified number in Asterisk?

  - by Rev

  I want to make ability for Asterisk phone Operators to able do something like this: While operator talking to caller, if Operator dial specified number like 244 (or something like that but not Sip-Userid's), do something (like play sound for caller or etc) for that call. So, Is this possible? Is need to change dialplan? ¦¦¦¦¦ I found this. in first paragraph it's say someething like: if operator dial exten go voiceMail.

  Read the article

• Symbolic link not allowed or link target not accessible

  - by TK Kocheran

  I can't seem to get a symlink working in my Apache VirtualHost, no matter what I try and I see the following error in the error log: Symbolic link not allowed or link target not accessible: /var/www/carddesigner I can browse the actual symlink from Linux with no problems whatsoever: $ ls -l /var/www | grep "carddesigner" lrwxrwxrwx 1 rfkrocktk rfkrocktk 64 2011-02-28 16:52 carddesigner -> /home/rfkrocktk/Documents/Projects/Work/carddesigner/build/main/ Additionally, I've made sure that the my VirtualHost allows the FollowSymLinks option: /etc/apache2/sites-enabled/000-localhost: <VirtualHost 127.0.0.1:80> ServerAdmin ########## DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Deny from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel debug CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> RewriteEngine On RewriteLog "/var/log/apache2/mod_rewrite.log" RewriteLogLevel 9 </VirtualHost> I can't seem to find any other configuration files that seem to override this and/or prevent symlinks from being loaded. Any ideas? Here are my permissions on the actual referenced files: $ ls -l ~/Documents/Projects/Work/carddesigner/build/main total 12 drwxrwxrwx 5 rfkrocktk rfkrocktk 4096 2011-02-28 16:11 advanced drwxrwxrwx 2 rfkrocktk rfkrocktk 4096 2011-02-28 16:10 core drwxrwxrwx 2 rfkrocktk rfkrocktk 4096 2011-02-28 16:10 simple Seems like the permissions are good to go, right?

  Read the article

• Choosing gateway router/firewall for small datacenter network [closed]

  - by rvs

  I'm choosing a gateway router/firewall for small internal network for medium-sized web service. Currently there are 5 servers in internal network, up to 50 http(s) requests/second, up to 1000 simultaneous connections, uplink is 100 Mbit. So, network is relatively small and not very busy and we don't like to buy some pricey monster like cisco or jupiper for this site. Instead we'd like to buy two affordable devices (one for spare), which can handle our workload now and some time in future (it might be up to 2x more in 1 year). I had some experience with Sonicwall NSA, but it seems to be too complex for this site (we don't need most of its features) and even too pricey when buying two of them. So, after some research I've come up with following options: Netgear Prosecure UTM Series (probably UTM25) Zyxel ZyWall Series (USG100 or USG200) Sonicwall TZ 210 Is this a good idea? All of the above seems to be more office products, not datacenter ones. Or we should stick with Sonicwall NSA? Does anyone have any hands-on experience with this models? Maybe some other advices? Thanks.

  Read the article

• iSCSI RAID1 on two servers, fail scenario

  - by Franz Kafka

  Hallo, a simple question: Image I have two servers, each server has two disks in RAID1. Now I merge the two arrays with iSCSI to one RAID1 disk. Two questions: Can I do the merging of the 4 disks in one go? I can't image how. First I will have to install the os, and then the raid controller is already set up to RAID1. If a whole server fails the other server would continue working without any problems? Does iSCSI notice that the other server is missing and treet this as if the two disks were broken? When the server comes back online the data is resynced, as if I installed new disks into a array? Can I image that this way? Thanks alot.

  Read the article

• MySQL cluster: Error after 1 data node is shutdown and started again

  - by nitins

  MySQL cluster: Error after 1 data node is shutdown and started again. We have configured MySQL cluster(version 7.1) with 2 sql/data nodes. We are using table space instead of in-memory clustering. The setup was working fine. So to test the setup I shutdown one data node, updated a table and and again stated the stopped node. Its giving this error and not starting. Any ideas ? Forced node shutdown completed. Occured during startphase 5. Caused by error 2306: 'Pointer too large(Internal error, programming error or missing error message, please report a bug). Temporary error, restart node'.

  Read the article

• v2v of RHEL5 box - issues with retaining MAC address

  - by Alex Berry

  For the last week we have been troubleshooting a customer's Red Hat Virtual Machine running on ESXi. We've been using Veeam to try to create a replica off-site and have been having getting it to work on a decent schedule and recently we noticed that there were issues with orphaned snapshots while looking at the datastore. You can see several snapshots in the same folder and it's causing issues with replication and backup, so we decided the cleanest way was to v2v the machine to another datastore so that we had a clean single-vmdk setup to work with, this is where our trouble started. We first started off with a v2v using vmware converter and connecting to the powered on machine as we were having issues doing an offline v2v. This copied fine but when I tried to set a static MAC using this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=507 the new VM wouldn't take the address, it simply obtained a new MAC, received a dhcp lease and then would only boot up to a blank red screen, never the login screen. So the next step was to do an offline v2v, once we finally got it working. Same thing, followed the kb to the letter and still it wouldn't take the MAC. I then tried it again and upon completion I compared both old and new VMX file, copying every identifier and variable possible, then unregistered both VMs, uploaded the new VMX file and booted, only to see the same results. Finally I did the same as above but I copied the disk using DD to a second attached vmdk and then attached this to the new VM, and still no luck. After downloading the modified VMX file after the first boot and comparing it to the original I created I found that the bios uuid had changed from the one I typed in manually, so I'm assuming this may be the snagging point, but I have no idea. I've never had this issue before on a P2V and I'm just wondering if someone could shed some light on this, maybe it's to do with RHEL licencing?

  Read the article

• Delivery Status Notification (Relay) in Exchange Server 2007 with original email attachment

  - by Nick Kavadias

  I have recently setup Exhchange Server 2007. The server is smarthosting outgoing messages. Users have 'request delivery receipt' on by default their 'auditing' purposes in Outlook. They would like the original email attached to the delivery notification as was the case in Exchange Server 2003. I need this same functionality in 2007. The question has been asked here, here and here but cannot find a valid solution. Here's some information about the functionality in Exchange 2003. The question is, can i replication this functionality in 2007? Here is what a 2007 delivery message looks like: I know it's possible to customize DSN's. Can I make a custom DSN for this type of message and have the original included as an attachment? Anyone got any other ideas?

  Read the article

• Celery - minimize memory consuption

  - by Andrew

  We have ~300 celeryd processes running under Ubuntu 10.4 64-bit , in idle every process takes ~19mb RES, ~174mb VIRT, thus - it's around 6GB of RAM in idle for all processes. In active state - process takes up to 100mb of RES and ~300mb VIRT Every process uses minidom(xml files are < 500kb, simple structure) and urllib. Quetions is - how can we decrease RAM consuption - at least for idle workers, probably some celery or python options may help? How to determine which part takes most of memory?

  Read the article

• gunzip: invalid compressed data--format violated

  - by Arunjith

  Problem definition: I transferred a tar.gz file from a Linux machine to a Windows partition.The Windows partition has mounted with the Linux server as cifs. OS : Red Hat Enterprise Linux Server release 5 Symptom: After the copy process is successful, doing an integrity check with gunzip -t and the process get the following error: gunzip -t Backup-28--Jun--2011--Tuesday.tar.gz gunzip: Backup-28--Jun--2011--Tuesday.tar.gz: invalid compressed data--format violated And further tried to untar (tar -xvzf) and the process as well is failed.

  Read the article

• Piping powershell messages to Write-EventLog

  - by Richard

  I have a powershell script that runs a custom cmdlet. It is run by Task Scheduler and I want to log what it does. This is my current crude version: Add-PsSnapIn PianolaCmdlets Write-EventLog -LogName "Windows Powershell" -Source "Powershell" -Message "Starting Update-EbuNumbers" -EventId 0 Get-ClubMembers -HasTemporaryEbuNumber -show all | Update-EbuNumbers -Verbose Write-EventLog -LogName "Windows Powershell" -Source "Powershell" -Message "Finished Update-EbuNumbers" -EventId 0 What I would like to do is log the output of my custom cmdlet. Ideally I'd like to create different types of event log entries based on whether it was a warning or a verbose message. Update: I don't want to log the return value of the commandlet. The Update-EbuMembers cmdlet does not return an object. I want to log any verbose messages written by WriteVerbose and I want to log errors created by ThrowTerminatingError.

  Read the article

• Linux: Send mail to external mail box from a server with that user's hostname

  - by dtbarne

  I've got sendmail running on a linux box. Let's say the hostname of the box is bar.com. If I run the following command, I don't receive the email (which is hosted with a third party), presumably due to the hostname pointing to the local machine. echo "Test Body" | mail -s "Test Subject" [email protected] Is there any way to get this to work so that I can receive emails at my third party email address even though it has the same hostname? Do I have to change the hostname of this server (not preferred)? It may be worth noting that I created a user "foo" on my machine and noticed that the mailbox for that account is empty. I noticed these log entries, which may or may not be relevant: Jun 28 01:09:48 bar sendmail[14338]: p5S59min014338: from=apache, size=80, class=0, nrcpts=1, msgid=<[email protected]>, relay=apache@localhost Jun 28 01:09:48 bar sendmail[14339]: p5S59mIA014339: from=<[email protected]>, size=293, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.$ Jun 28 01:09:48 bar sendmail[14338]: p5S59min014338: [email protected], ctladdr=apache (48/48), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30080, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (p5S59mIA$ Jun 28 01:09:48 bar sendmail[14340]: p5S59mIA014339: to=<[email protected]>, ctladdr=<[email protected]> (48/48), delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30495, dsn=2.0.0, stat=Sent

  Read the article

• Mongo daemon restarts after replica set issue

  - by Matt Beckman

  We had a recent election in our replica set (2 read nodes; 1 write node) that changed the primary node. Curious as to why this occurred, I started looking through the logs to find out what happened. It appears that mongoNode2 could not communicate with mongoNode3. When both nodes could not communicate, it appears that this caused the services on mongoNode2 and mongoNode3 to restart, eventually resulting in a new primary after the services had been started again. Thu Jun 23 08:27:28 [ReplSetHealthPollTask] DBClientCursor::init call() failed Thu Jun 23 08:27:28 [ReplSetHealthPollTask] replSet info mongoNode3:27017 is down (or \ slow to respond): DBClientBase::findOne: transport error: mongoNode3:27017 query: { \ replSetHeartbeat: "myReplSet", v: 3, pv: 1, checkEmpty: false, from: \ "mongoNode2:27017" } Thu Jun 23 08:27:29 got kill or ctrl c or hup signal 15 (Terminated), will \ terminate after current cmd ends Thu Jun 23 08:27:29 [interruptThread] now exiting Thu Jun 23 08:27:29 dbexit: Is there any reason that the mongo service would restart due to a DBClientCursor::init call() failure? Is this a known bug? It should be noted that mongoNode2 and mongoNode3 are VMs on the same VMware host. MongoNode1 is not on the same host, and it did not have any issues with the service. However, I did not have any other reports of issues with other VMs on the VMware host.

  Read the article

• Any problems with using a 301 redirect to force https traffic in IIS?

  - by Jess

  Is there any problem with using a 301 redirect to force all traffic to go to a secure-only site? We originally had redirect rules, but enforcing SSL-only seemed more secure. Here is how we set it up: Site 1: https://example.com/ Require SSL set Bound to 443 only Site 2: http://example.com Bound to 80 only Empty folder - no actual html or other data 301 Redirects to https://example.com This seems to work beautifully, but are there any issues with doing this? Would any browsers not recognize the 301 redirect, or could there be security warnings during the redirect?

  Read the article

• WAMP server won't run with PHP 5.3.4 but will with PHP 5.2.11

  - by Ben Williams

  I have a 64bit Windows 7 Professional machine. I'm running WampServer Version 2.1 with Apache 2.2.4. It was installed on a clean machine. I'm using the default ini/conf files as they come. Wamp is installed in C:\wamp\, with php5.2 at C:\wamp\bin\php\php5.2.11 and php5.3 at C:\wamp\bin\php\php5.3.4. Both folders have the same permissions. When I run WAMP with 5.2.11 picked, it starts fine. When I run it with 5.3.4 picked, there are no errors in the Apache or PHP error logs, but I get The Apache service named reported the following error: httpd.exe: Syntax error on line 115 of C:/wamp/bin/apache/apache2.2.4/conf/httpd.conf: Cannot load C:/wamp/bin/php/php5.3.4/php5apache2_2.dll into server: The Apache service named is not a valid Win32 application. in my system application error logs. 5.2.11 calls C:/wamp/bin/php/php5.2.11/php5apache2_2.dll and that doesn't throw an error. What am I doing wrong?

  Read the article

• Automatically accept Windows Logo testing?

  - by olofom

  I asked this question yesterday on stackoverflow, but it should be migrated here instead. Since I am not able to migrate it myself and would like an answer as soon as possible I'm reposting it here instead: I am to upgrade a printer driver remotely and has prepared a batch file for this. The only problem is that when I'm installing the drivers I get a popup in which I need to press "Continue Anyway" on. Is there a way to automatically accept this question? I wont be able to go to all the machines that are to be upgraded. The popup:

  Read the article

• 1080p monitor: connected through VGA - perfect, HDMI - awful

  - by develroot

  When I connect my 23" monitor (1920x1080) to my pc through HDMI, I encourage some problems. It's not full screen That's it. There are ~1cm black borders on right and left side and ~0,5cm black borders on the top and the bottom of the monitor. That's pretty frustrating. I tried adjusting overscan, but I can't mannualy type the % of overscan that I need. I can only select between ex. 8 and 10% in AMD Vision Engine Control center, but what I need is 9%. Next, even if i select 10% and the image fits all the corners, but after log off all the settings are lost and I have to do it again and again. Text, images, everything looks blurry That surprised me a lot. Should'nt HDMI quality be better than VGA's one? When connected through HDMI, the text isn't readable. It's like a very low refresh rate, although i'm running at 60Hz. Also the text has something like little shadows, very very annoying. Are there any tips to get the same quality as with VGA, with HDMI ? (running on integrated ATI Radeon HD4200, which, appearently, is the best card I have ever seen in terms of integrated ones)

  Read the article

• Vim: I don't want to insert!!!

  - by bhh1988

  I could not find anything online addressing this problem, which is surprising. The problem is that I find it very easy to accidentally insert stuff in Vim. I know I can undo by with 'u', but it still is quite annoying and frequent. Often, I enter a command like 'sp file.txt' without realizing that I haven't entered the ':' character yet (so I'm not yet on the command line). Unfortunately, there are several characters that take you to insert mode, including 's', 'a', 'i', 'o'. I'd rather have insert mode mapped to just one keybinding which is very deliberate, like shift-space. Can anyone point me to something that might have what I'm looking for? Thanks.

  Read the article

• Getting SMB file shares working over a PPTP VPN

  - by Ben Scott

  I'm having issues getting SMB file shares working over a PPTP VPN. The server setup consists of a security device (DrayTek V3300) which passes the PPTP authentication to a SBS2003 server running RRAS. The server is the DC and provides DNS and WINS, the single NIC's name server is set to 127.0.0.1, and DHCP on the DrayTek sets the server IP as the DNS. If I create a new VPN connection in Win7, leaving everything as default apart from the server, username, password and domain, I can: ping everything by IP address resolve IPs with nslookup using their fully-qualified name, as in nslookup fileserver.mydomain.local ping machines by fully-qualified name, as in ping fileserver.mydomain.local However if I try to access a file share: within Explorer, I get "Windows cannot access ..." with "Error code: 0x80004005 Unspecified Error", using net use z: \\fileserver.mydomain.local\share, I get "System error 53 has occurred. The network path was not found." If I add the machine name to my HOSTS file I can use the file share, which is my last-ditch workaround, but I have a number of VPN users and would rather a solution that doesn't involve me trying to hand-edit system files on computers half a country away. If I set the WINS server explicitly in the connection's IPv4 settings I don't have to use the FQN to ping the machine, but that doesn't change anything else.

  Read the article

• Sharing Internet Connection using an ad-hoc wifi network

  - by Apps

  I've installed a WiFi Adapter in my Windows XP PC and created an ad-hoc network. I am able to connect to the network through my iPod Touch. On the same PC I have a LAN connection to the Internet. I need to share this internet connection to my iPod too. The problem is Windows did not assign an IP Address (even though assign IP address automatically is selected) to this WiFi network. When I tried to share the Internet connection, I got a message that LAN Network Adapter's IP address will be changed to 192.168.1.1. But if this happens I will not be able to connect to other devices/servers in my LAN Network. How do I share the Internet connection through WiFi?

  Read the article

• Log Files from bash script output

  - by neildeadman

  I have a script that runs (this works fine). I'd like to produce logfiles from its output and still show it on screen. I have this command that creates three files from this blog: ((./fk.sh 2>&1 1>&3 | tee errors.log) 3>&1 1>&2 | tee output.log) 2>&1 | tee final.log This does exactly what I want it to. My only issue is that I create files in my script and copy them somewhere, and I'd like to copy these logfiles there too, which I can't do whilst this script is running. I also wanted to make it easier for any user to run my script, so I created another script to run this script. According to this post (see last post) I can put a . before the script name and I can use variables assigned in my called script from the first script if I use them in the first. It doesn't seem to work though and I can't figure out why or find alternative methods. Can anyone help?

  Read the article

• File command output is different for same file on diff machine

  - by Coka

  I get different output of file command on same file(checked inode) from different machines. One of the machines is with suse10 sp3 and the another - rhel4. machine1>file x.tcl x.tcl: ASCII English text machin2>file x.tcl x.tcl: data Even in vi editor same file look different from different machine. Any clue? One more thing - there's third machine suse10 sp3 works fine. Is this machine issue?

  Read the article

• PC monitors shut off and system hangs while playing 3D games, but sound continues - Diagnosis?

  - by Jon Schneider

  Two days ago, I started running into a problem with my Windows PC: The PC's two connected monitors simultaneously lose signal and go black (as though the PC had been powered off). The keyboard's Numlock, Capslock, and Scroll Lights will become "stuck" in their current positions, as though the PC is hung. (For example, the Numlock light on the keyboard remains lit regardless of me pressing the Numlock key repeatedly.) No keyboard input does anything. (Ctrl+Alt+Del, Ctrl+Shift+Esc, Ctrl+C, etc.) However -- Whatever sound/music the PC was playing continues to play, and the PC's fans continue running, so the PC hasn't powered itself off or rebooted itself. Opening up the case, the graphics card is pretty hot to the touch. I had this happen 3 times in one evening. In all cases, I was playing a game with 3D graphics when the problem occurred (Torchlight, Minecraft, Magic: The Gathering 2012, Avadon: The Black Fortress demo). I have yet to have the problem happen when I'm not playing a game. This system has been running stable for about 2.5 years prior to this. I didn't make any changes to the system prior to the problem starting to occur. System specs: OS: Windows 7 64-bit Processor: Intel Core 2 Duo E7200 Wolfdale 2.53GHz Video Card: XFX GeForce 9800 GT 512 MB Motherboard: Foxconn P45A-S LGA 775 Intel ATX RAM: Corsair 4 GB (2x 2GB) DDR2-800 (PC2 6400) Full specs: New PC 2008 Troubleshooting tried so far (the problem occurred again after taking each of these steps, one at a time): Updated the video drivers with the latest drivers from NVidia's site. Opened up the case and cleaned out the video card and processor fans (both were pretty dirty). Installed and ran temperature monitor software. The processor idles at about 50 degrees C, and goes up to about 63 degrees C while playing a game (seems on the warm side, but not excessively so?). The software wasn't able to report the temperature of the GPU -- not sure this particular GPU supports software temperature readout? My initial diagnosis is that maybe the GPU is on its last legs (given that it seems to be running pretty hot, and the problem only occurs while playing 3D games). Does this seem likely? Or is it likely that this problem is caused by the processor, RAM, or motherboard? Or could this be a software issue of some kind? Thanks for any advice!

  Read the article

• How can I split a formula into multiple lines in OpenOffice calc?

  - by cherouvim

  I have this simple formula: =CONCATENATE("foo";"bar") which renders foobar on the cell. How can I lay this formula in multiple lines in the same cell? I'd like to be able to do something like the following but it doesn't work as the newline in the cell forbids the formula from being executed: =CONCATENATE("foo"; "bar") The reason I'm asking is because I have huge formulas an I need to format them (using newlines and a bit of indentation) for readability. thanks

  Read the article

• How do laptop battery voltages affect runtime?

  - by Bigbio2002

  I ordered a new battery for my faithful XPS M1710. I'm not sure of the voltage of the battery I have now, but the new one that the Dell rep got me (after 3-4 times confirming my phone number and laptop model number) is 14.8v. I was a bit concerned about potential incompatibilities (as most of the other compatible batteries listed were 11.1v), but I figure that there's no way that Dell would "recommend" batteries that wouldn't work or fry your system. Now, my question is, how does voltage affect battery life? If we assume the needed power draw to be constant, a higher voltage would indicate less amperage needed, therefore the battery would last longer before running out, yes? Or am I missing something? For reference: P=I*V P = power I = current V = voltage (duh)

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >