Daily Archives

Articles indexed Wednesday November 30 2011

Page 5/16 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• What package is meant to replace thinkfinger in 11.10?

  - by misterhaan

  My laptop has a fingerprint reader that until 11.10 I used via thinkfinger. That package is no longer in the repositories, but I assume there’s a different package meant to support fingerprint readers in thinkfinger’s place. What is the recommended fingerprint reader package? Should I just find thinkfinger on my own and use that instead? Here’s my reader’s lsusb output: Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader

  Read the article

• Drivers Unresponsive, Only Ubuntu 8.0 can install

  - by Nate Dogg

  I tried to install through boot through disk, but the windows set-up says there's no hard drive. The new ubuntu cd's i've made do not work. I can't update anything on old ubuntu. This is all due to my computer turning off during a recent version upgrade of ubuntu. Kernel error? idk. Going throught my computer, none of my media drivers are responsive, or cd writing drivers, and I guess I have no hard drive (only old ubuntu can read?). Serious need of help, I cant write college papers on this....

  Read the article

• System Settings and Software Center does not pull up after fresh install 11.10 amd64

  - by hydroparadise

  I've had a few install rounds with ubuntu ever since 8.04 and has worked flawlessly every time. However, for some reason, when I try to click either System Settings or Software Center, the icon pulses as if it were working to come up but never does. The same goes for System Settings. I would expect that a password dialog would appear, but nothing shows. Is there bug with 11.10 that didn't exist with 11.04?

  Read the article

• Can't download web photo albums to Picasa

  - by Arcadie

  Someone has shared a Picasa web album (Limited, anyone with the link), but I can't download it to Picasa. The following alert appears: Firefox doesn't know how to open this address, because the protocol (picasa) isn't associated with any program. I have Picasa 3.0.0 installed on Ubuntu 11.04, I remember it saying something about registering the picasa protocol with Firefox during the installation. I have Firefox 6.0.2, and these settings are present in about:config network.protocol-handler.app.picasa;/usr/bin/picasa network.protocol-handler.expose.picasa;true network.protocol-handler.external.picasa;true Picasa is located here: $ which picasa /usr/bin/picasa Is there something I can do to make this work? PS: I hope this is not off-topic here, and I can't find the "picasa" tag. Could someone please add it, if appropriate?

  Read the article

• Ubuntu 11.10 - can't adjust brightness on my laptop

  - by Danny

  Using every method possible I'm unable to change my laptop brightness.. It's stuck on super max brightness.. Using the slider in the "screens" window int he control panel doesnt do anything, and using the fn keys doesn't do anything... Some info about my system: laptop is a MSI VR420 Running ubuntu 11.10 video card is an integrated intel card Used to work when I ran ubuntu 10.10 and earlier versions (not sure if it worked out of the box or if I inadvertly fixed it in previous versions while installing lots of other packages) Brightness slider on the "screen" window doesn't do anything, "dim when on battery -power" doesnt do anything When I use the fn+f4/f5 keys to adjust brightness there is a popup showing that its receving the input, but i can only go from between 0 brightness and max brightness.. (that is what the output is showing, the brightness does not change though) when attempting to change the brightness with fn+f4/f5 my dmesg log reports "ACPI: Failed to switch the brightness" Here are some outputs from some terminal commands, not sure if any of this is useful or not.. lspci - http://pastebin.com/EimZSGs3 "ls /sys/class/backlight/*/brightness" will output "/sys/class/backlight/intel_backlight/brightness" "cat /sys/class/backlight/intel_backlight/brightness" = 0 (when I use the fn+f4/f5) this will change betwene 0 and, but the actual brightness doesn't change) "cat /sys/class/backlight/intel_backlight/max_brightness" = 1 "lsmod | grep ^i915" = i915 505108 3 here is the list of things I've tried through searching google..... Edit /etc/default/grub?GRUB_CMDLINE_LINUX_DEFAULT: acpi_osi=Linux, acpi_backlight=vendor, nomodeset. (as well as several different combinations of these settings being on or off) Edit /etc/X11/xorg.conf (file doesn't exist on my system) Edit /proc/acpi/video/VGA/LCD/brightness (file doesn't exist) sudo setpci -s 00:02.0 F4.B=XX (does nothing) xbacklight -set XX (does nothing) I've tried about everything with no luck... The only thing i haven't tried is adding the ppa that someone suggested here: Unable to change brightness in a Lenovo laptop .... However according to the notes on the ppa.. all of the changes that are in the ppa are now actually apart of 11.10 and the ppa is only for people with 11.04.. Does anyone have any ideas for me? edit:by setting acpi=off in my /etc/default/grub file I was about to get my fn+f4/f5 keys to work, also "dim when display to save power" now makes my laptop dim when on battery power.. the dimness slider however still doesn't do anything.. also xbacklight doesn't do anything stil or any of the other methods... The thing i don't get is why setting acpi=off makes my fn+f4/f5 keys work? Isn't acpi supposed to be enables the backlight to be dimmed? does anyone know what ubuntu is deciding to do behind the scenes when acpi=off? Does anyone know what/if any features I might be losing with it off?

  Read the article

• How to create website shortcuts on the desktop / in a folder using Chrome?

  - by it's me

  Help with something really basic, which I am unable to figure out. In Windows creating a shortcut (link) for a website is as easy as dragging-and-dropping the favicon/address bar to the desktop or a folder. I tried the same in Ubuntu (Chrome browser), but it's not working. The web page is being saved as a file, but not as a link/shortcut. Am I missing something or is there no way to quickly create shortcuts to web pages/web sites without installing some app for that? If the above is true, is there an app that does what I need? I hope I am clear enough.

  Read the article

• I got my z-5 Logitech speakers to work, but whenever I restart, I have to reconfigure them

  - by The Bill

  This is the content of my alsa-base.conf file (for some reason, the entries preceded by # are bolded--anyway): autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 alias snd-card-0 snd-usb-audio alias snd-card-1 snd-hda-intel options snd-usb-audio index=0 options snd-hda-intel index=1 Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 options snd-usb-audio index=-2 options snd-usb-audio index=0 alias snd-card-0 snd-usb-audio alias snd-card-1 snd-hda-intel options snd-hda-intel index=1 I deleted a line that said something like "#Keep usb-audio from being loaded as first soundcard" and that made the speakers work for the first time (before this, they never showed up). I also added the last four lines. Anyway, what can I add to this so that I don't have to reconfigure them each time I restart? Currently, I have to open Sound Settings, then under the hardware tab, select Analog Stereo Output, and then unplug my USB speakers and plug them back in. This makes them pop up so that I can see them. Otherwise, it will not show my Z-5 speakers as a device that can be configured.

  Read the article

• Virtualbox: host only networking - proxy internet connection

  - by Russell

  I'll ask my question first, then give details about where I am coming from: Is it possible to use host only, then have ubuntu act as a proxy to provide internet access to windows? If so, how? I am trying to get the right combination of networking for my virtualbox windows client VM (win7). My host is ubuntu 10.10 (maverick). I believe I understand the basic network options (please correct me if I am incorrect): NAT - Host can't communicate with guest but guest has access to all host's adapters Host only - Separate adapter but guest has no net access Bridged - bridge an adapter in the host with the virtual adapter to give the host access to the host adapter I am trying to give my win guest internet access, but also access the host in a separate network. Bridged only works when the host is connected to the internet (this is a laptop) so when it's not connected the network is down. Thanks I appreciate your help.

  Read the article

• Windows expand over 2 monitors in quad-monitor setup

  - by Martin

  i just installed ubuntu 11.10 with my previous hardware setup: 4 monitors and 2 identical nvidia graphic cards. draging windows around all 4 monitors works nice, but when i maximize a window it expand always over 2 screens. (2x twinview). i had an workaround for this in 11.04 but cant remember what it was... may one of you guys have quad monitors up and running with window maximizing on only one screen my xorg.conf looks like this: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@allspice) Thu Aug 11 20:54:45 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" 0 1080 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• Using Upstart after building Apache & Mysql from source

  - by Tek

  I'm using Ubuntu 10.10, Apache 2.2.17 and Mysql 5.5.10. I need some assistance getting Apache and Mysql running on boot. Reading the getting started over at upstart website attempting to get it to work. I added /etc/init/apache2.conf along with the following line: exec /usr/local/apache2/bin/apachectl I'm probably doing everything wrong, could someone point me in the right direction? Thanks. :)

  Read the article

• Where do I put my start up script for mysql?

  - by Neo

  I have created a second instance of MySQL on the server for replication, if I start the process manually it works but need it to start at bootup. I used to just do a bash script in the init.d folder but apparently that no longer works on 11.10 Can anyone point me in the right direction? I even copied the mysql service, changed it and tried that but it refused to work. P.S It is the server edition so only Shell access.

  Read the article

• Remove packages to tranform ubuntu Desktop to Server?

  - by Azendale

  I have a VPS that has Ubuntu 11.10 on it. Unfortunately, only the 11.10 Desktop (not server) image was available as an image to install your VPS with. How can I remove the packages included in the Desktop install, and, if needed, install the packages that only the server install has? I've tried sudo apt-get remove ubuntu-desktop and then sudo apt-get autoremove. Unfortunately, that didn't work: it only removed 'libjudy-debian' (or something like that) which was installed from having 'miredo' installed at one point.

  Read the article

• Problem with dash - there are no programs on the list

  - by sky

  As I said. There are no programs on the dash list (seacher on appmenu). Yesterday I logged into my account and I tried to find some program but there wasn't any! Additionaly, I tried to view installed programs and manually find program which I looked for, but nothing was displayed :( And today, when I want to turn on Ubuntu Software Center, it just don't turn on .< I'm using Ubuntu 11.10 (64bit). I installed "fresh" O.S. few days ago. Ubuntu is updated and has many Gigabytes of disk memory available. Please help me and my unfortunate O.S. Thank you for all answers.

  Read the article

• apache2 is making my amazon ec2 unavailable, any ideas?

  - by Tim

  I have a web server running on a EC2 c1.medium intance. The instance is running on ubuntu, with apache2 and mysql.The ubuntu and apache version are the next; Ubuntu DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.04 DISTRIB_CODENAME=natty DISTRIB_DESCRIPTION="Ubuntu 11.04" Apache2 Server version: Apache/2.2.17 (Ubuntu) Server built: Feb 22 2011 18:33:02 Sometimes randomly, my server "hangs up", I cannot connect to it using normal web access or ssh access. If I reboot the instance it reboots fine, the amazon system log doesn't show anything weird, but the problem persists The only way to solve it its stopping the instance, and start it again. I think that the problem its has something to do with apache, because the last lines of the error log lists: normal errors [Sun Jun 19 06:25:09 2011] [notice] Apache/2.2.17 (Ubuntu) PHP/5.3.5-1ubuntu7.2 with Suhosin-Patch configured -- resuming normal operations nobody cant connetc... no more erros until i stop and start the instance normal errors [Wed Jun 22 14:21:18 2011] [notice] Apache/2.2.17 (Ubuntu) PHP/5.3.5-1ubuntu7.2 with Suhosin-Patch configured -- resuming normal operations nobody cant connetc... no more erros until i stop and start the instance Can somebody please help me?

  Read the article

• BCM 4306 not recognized after upgrade on a Dell Latitude D600

  - by Brian Eisemann

  This is extremely frustrating to me. I had the wireless card working before I upgraded to 11.10. At first the wireless device was recognized but it told me there was no firmware, so I went ahead and went through the process I did before of installing the b43/b43legacy firmware, and now my wireless device is not even recognized, or showing up anywhere! 02:03.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11a/b/g [14e4:4324] (rev 03)

  Read the article

• Looking for mass cropping software

  - by Bart van Heukelom

  I'm looking for a tool than runs on Ubuntu that can let me: Open an image in a folder which has thousands Crop and rotate it Save as a copy, automatically named (not manually), with one click. Preferably with something in the name that I can later use to filter these cropped copies in Nautilus (unless it saves in another directory, that'd be even better). Move to next image and repeat Does it exist?

  Read the article

• sendmail and local mail server?

  - by Hailwood

  For testing emails I don't want to actually send an email out (and can't anyway as ISP blocks port 25). I have installed Sendmail, and what I want to do is install a mail server on the same pc that is sending the email which I can simply send the emails to, and receive them on my pc. so I am looking for a couple of guides. install and configure sendmail correctly for this. install and configure a mail server correctly for this. setup mail client (evolution) to connect to the mail server Can anyone help with this?

  Read the article

• How do I save to an NTFS partition?

  - by RADHAKRISHNAN

  I was using ubuntu 11.04 on my Laptop. While installing it from a DVD, I have created a 10 GB NTFS partition at the beginning of the hard disk, as primary. All other partitions ( swap, a ext3, a ext4 and a FAT32 ) are created in as logical in the extended partition. All were working well in ubuntun11.04. Now the system was upgraded to ubuntu 11.10 via internet and was sucessful. But unable to either create folder/files or to write to existing files in the said NTFS partiton. But files in the partition can read - means mounting done. Same is the case even if logged in as root also. Fortunately no such problem with other partitions including FAT Why it is so, please help.

  Read the article

• What is the most time-effective way to monitor & manage threats from bots and/or humans?

  - by CheeseConQueso

  I'm usually overwhelmed by the amount of tools that hosting companies provide to track & quantify traffic data and statistics. I'm equally overwhelmed by the countless flavors of malicious 'attacks' that target any and every web site known to man. The security methods used to protect both the back and front end of a website are documented well and are straight-forward in terms of ease of implementation and application, but the army of autonomous bots knows no boundaries and will always find a niche of a website to infest. So what can be done to handle the inevitable swarm of bots that pound your domain with brute force? Whenever I look at error logs for my domains, there are always thousands of entries that look like bots trying to sneak sql code into the database by tricking the variables in the url into giving them schema information or private data within the database. My barbaric and time-consuming plan of defense is just to monitor visitor statistics for those obvious patterns of abuse and either ban the ips or range of ips accordingly. Aside from that, I don't know much else I could do to prevent all of the ping pong going on all day. Are there any good tools that automatically monitor this background activity (specifically activity that throws errors on the web & db server) and proactively deal with these source(s) of mayhem?

  Read the article

• Best method to do A B testing across to subdomains

  - by Lior

  I want to do an A B test of an entire site for a new design and UX with only slight changes in content (a big brand site that has good Google rankings for many generic keywords. My idea of implementation is doing a 302 redirect to the new version (placing it on www1 subdomain) and allowing only user agents of known browsers to pass. The test version will have disallow all in the robots text. Will Google treat this favorably or do I have to use Google Website Optimizer (which will give me tracking headaches)?

  Read the article

• Google search results page titles "hijacked" by porn

  - by rfoote

  Sorry, that title probably doesn't make much sense. Over the past couple of weeks, we've noticed that the search results from Google for some of our drupal-powered sites are having their page titles hijacked somehow. An example would be: free streaming porn - [Actual page title] There are other variations of the porn prefix, that's one of the more tame ones. I looked in the databases for each of these sites and the titles haven't actually been changed or anything along those lines. When you click on the result to visit the page everything looks normal (sans porn stuff). Would anyone be able to point me in the right direction as to what the cause of this is? Searching Google for the potential problem isn't being much help, yet. Thanks in advance!

  Read the article

• photshop: why low quality jpg saved as high quality increases the file size?

  - by Alex Angelico

  i have a low quality background about 85kb. If I open the file in Photoshop and save it, I have to save this image as 100% quality, the file size increases to 640kb. This doesn't make sense, the image si already compressed, the quality cannot be better than the source, so the 100% quality while saving should produce THE SAME FILE OPENED. The problem is, I have this background and want to add a logo image over it, and then save it. But If I do so, i have to save this with 10% quality, and the logo looks horrible. If I save this to 100% quality, the file size is huge... How can I achive this?

  Read the article

• Free Hosting With these specs [closed]

  - by blunders

  Possible Duplicate: How to find web hosting that meets my requirements? Looking for to make a quick site and have the following requirements: It's free No ADs, frames, etc Support for directory/site password Allow web-based or FTP file transfer Allows 100 MB to 1 GB of storage custom short URL or sub-domain Realize this might be very narrow, but figured I'd ask just in case there was a good solution.

  Read the article

• Directing from a 1und1 hosting solution, with urls intact

  - by Jelmar

  I have done this before on GoDaddy without a hitch, but I cannot seem to figure out this particular case. I have a domain space with temporary url http://yogainun.mysubname.com/ and am hosting the domain name that is to be applied to it at 1und1.de. Right now I have set it up so that from the 1und1 domain name hosting the address http://www.yoga-in-unternehmen.de/ is frame redirected to the subdomain that I just referred to. But this is not what I want. http://www.yoga-in-unternehmen.de/ is to be the domain. With the frame redirect, url's like http://www.yoga-in-unternehmen.de/example-article do not show up. But this is what I want. With godaddy in a similar case, I just turned on DNS and changed the name servers. That worked without problem, but with 1und1 not. Is there something I am missing?

  Read the article

• Looking for PHP/MySQL-based ad manager

  - by user359650

  Could you recommend based on your experience a PHP/MySQL-based admin interface for managing your website ads? In order to be really useful, such application should have: -basic CRM functionality to track who is providing the ads -multilingual multi country support: have the ability to specify for the same ad, different versions for multiple languages/countries -predefined ad formats (google Ads, flash ads...) and sizes with corresponding PHP helpers so as to insert in the HTML code the necessary markup to properly integrate the ad. Ideally if that application could be desgined for Zend Framework that would be awesome (but I think I'm dreaming at this point).

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >