Daily Archives

Articles indexed Sunday November 10 2013

Page 5/15 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• InterVLAN routing on a HP V1910 series switch

  - by tintix

  Recently bought a HP V1910-16G switch (former 3com 29??) with IPv4 routing capabilities. After unpacking I did a firmware upgrade to the latest 5.20 Release 1513P06. I did set up additional VLANs (#2 and #3) and VLAN interfaces for those. The problem is that connected PCs on different VLAN's can't ping each other. Looks like VLAN routing doesn't even work. So here's my setup: VLAN ID VLAN interface 1 10.0.0.21/24 2 10.0.5.1/24 3 10.0.6.1/24 Have one PC connected to VLAN 2 (IP address 10.0.5.2, default gateway 10.0.5.1) and a second PC connected to VLAN 3 (IP address 10.0.6.2, default gateway 10.0.6.1) Routing table: Destination IP Mask Next Hop 0.0.0.0 0.0.0.0 10.0.0.1 10.0.0.0 255.255.255.0 10.0.0.21 10.0.0.21 255.255.255.255 127.0.0.1 10.0.5.0 255.255.255.0 10.0.5.1 10.0.5.1 255.255.255.255 127.0.0.1 10.0.6.0 255.255.255.0 10.0.6.1 10.0.6.1 255.255.255.255 127.0.0.1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 255.255.255.255 127.0.0.1 The first PC can't ping the second PC one and vice versa. They only can ping their own gateways and that's all. What I'm doing wrong?

  Read the article

• Can a DNS server return NXDOMAIN and an unresolved CNAME even though the alias exists?

  - by Martin

  I'm trying to understand why one given DNS server is not resolving our domain correctly. When I look up www.foo.com from this name server, a CNAME foo.bar.cc is correctly returned but there's no attached A record and the response status is NXDOMAIN. I understand that this could happen if the DNS server can not resolve the alias foo.bar.cc. However, if I use the same DNS server and look up foo.bar.cc directly, I always get the correct A record. When using any other DNS servers I've tested (different ISPs, Google DNS, Open DNS) our domain resolves correctly. Given this situation, is there some possible problem in our DNS that could cause this? Or does it seem like this given DNS server is to blame? The DNS server in question is used by a lot of people and it seems more likely that the problem is caused by us, but I don't see how - any clues?

  Read the article

• Ubuntu and Postfix Configuration Issues

  - by Obi Hill

  I recently installed postfix on Ubuntu Natty. I'm having a problem with the configuration. Firstly here is my postfix configuration file: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. mydomain = $myorigin myhostname = mail.nairanode.com alias_maps = hash:/etc/postfix/aliases alias_database = hash:/etc/postfix/aliases # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this is for the mailbox location for each user virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf # and this is for aliases virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf # and this is for domain lookups virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf # this is how to connect to the domains (all virtual, but the option is there) # not used yet # transport_maps = mysql:/etc/postfix/mysql_transport.cf virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 mydestination = $myorigin, $myhostname, localhost.localdomain, , localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all #mynetworks_style = host # ADDITIONAL unknown_local_recipient_reject_code = 550 maximal_queue_lifetime = 7d minimal_backoff_time = 1000s maximal_backoff_time = 8000s smtp_helo_timeout = 60s smtpd_recipient_limit = 16 smtpd_soft_error_limit = 3 smtpd_hard_error_limit = 12 # Requirements for the HELO statement smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit # Requirements for the sender details smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_$ # Requirements for the connecting server smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.n$ # Requirement for the recipient address smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_do$ # require proper helo at connections smtpd_helo_required = yes # waste spammers time before rejecting them smtpd_delay_reject = yes disable_vrfy_command = yes Here is also my /etc/postfix/aliases: # See man 5 aliases for format postmaster: root Here is also my /etc/mailname: nairanode.com I've also updated my hostname to nairanode.com However, when I run postalias /etc/postfix/aliases I get the following : postalias: warning: valid_hostname: invalid character 47(decimal): /etc/mailname postalias: fatal: file /etc/postfix/main.cf: parameter mydomain: bad parameter value: /etc/mailname Is there something I'm doing wrong?! I noticed that when I replace myorigin = /etc/mailname with myorigin = nairanode.com in my postfix config, I don't see any errors anymore after calling postalias. Is this a bug or something?!

  Read the article

• how to install npm if couldn't resolve npmjs.org

  - by Rahul Mehta

  when m doing curl it says could not resolve host what can i do ? curl http://npmjs.org/install.sh | sudo sh curl: (6) Couldn't resolve host 'npmjs.org' http://npmjs.org/ /etc/resolv.conf search x1 nameserver x2 nameserver 8.8.8.8 nameserver 8.8.4.4 nslookup result nslookup google.com Server: x1 Address: x1#53 Non-authoritative answer: *** Can't find google.com: No answer Non-authoritative answer: * Can't find google.com: No answer

  Read the article

• Nginx Reverse Proxy Node.js and Wordpress + Static Files Issue

  - by joemccann

  I have had quite a time trying to get nginx to serve static assets from my wordpress blog. Have a look at the config and let me know if you can help. ( https://gist.github.com/1130332 - to see the entire thing) server { listen 80; server_name subprint.com; access_log /var/www/subprint/logs/access.log; error_log /var/www/subprint/logs/error.log; root /var/www/subprint/server/public; # express serves static resources for subprint.com out of here location / { proxy_pass http://127.0.0.1:8124; root /var/www/subprint/server; access_log on; } #serve static assets location ~* ^(?!\/).+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|pdf|txt|tar|wav|bmp|rtf|js|flv|swf|html|htm)$ { expires max; access_log off; } # the route for the wordpress blog # unfortunately the static assets (css, img, etc.) are not being pathed/served properly location /blog { root /var/www/localhost/public; index index.php; access_log /var/www/localhost/logs/access.log; error_log /var/www/localhost/logs/error.log; if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } if (!-f $request_filename) { rewrite /blog$ /blog/index.php last; break; } } # actually serves the wordpress and subsequently phpmyadmin location ~* (?!\/blog).+\.php$ { fastcgi_pass localhost:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/localhost/public$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /usr/local/nginx/conf/fastcgi_params; } # This works fine, but ONLY with a symlink inside the /var/www/localhost/public directory pointing to /usr/share/phpmyadmin location /phpmyadmin { index index.php; access_log /var/www/phpmyadmin/logs/access.log; error_log /var/www/phpmyadmin/logs/error.log; alias /usr/share/phpmyadmin/; if (!-f $request_filename) { rewrite /phpmyadmin$ /phpmyadmin/index.php permanent; break; } } # opt-in to the future add_header "X-UA-Compatible" "IE=Edge,chrome=1"; }

  Read the article

• Citrix XenApp application does not have keyboard focus when launched

  - by Jason Pearce

  On new or existing Citrix XenApp 4.5 servers, I am having problems streaming the Allscripts Pro EHR application via the XenApp web interface. When users launch the application via the Citrix XenApp web interface, the application does not have focus, preventing users from typing in their username and password. If they use their mouse to select either the username or password fields, they still cannot enter any text. However, if they do any of the following actions, they can then enter in their username and password and the application runs without problems: Click on the Login button with empty fields. Logon fails but they can then enter their credentials. Minimize the login window and then maximize it. They can then gain keyboard focus to enter their credentials. What might be preventing this particular application from having focus when it launches?

  Read the article

• Rewrite (or add) "Sender: " header when MAIL FROM is not the authenticated user

  - by nbevans

  I need to get Postfix to inspect the MAIL FROM of the envelope and determine whether it matches the authenticated user of the session. If it does not, it should then add or update the "Sender: " header inside the e-mail so that its value is that of the authenticated user. I understand that this can be done using sender_canonical_maps but, having tried a few remedial tests, I'm unable to get it working. More than anything I would like to know whether this is actually possible with Postfix, and secondly whether I am in the right ball park. Lastly, an example of how to do it would be fantastic. Thanks very much.

  Read the article

• Reverse NAT Setup for Hyper-V on Win 2008 R2

  - by sukru

  I'm trying to setup a Linux server behind a Windows Hyper-V host that will help supply some of the services (SSH, HTTPS, etc). However getting RRAS configured for reverse NAT (port forwarding) turned out to be a non trivial task. As a staring point, I tried forwarding port 22 (SSH) to the virtual machine. The virtual machine is on a public interface (i.e.: it also has a visible IP on the same network as the host). On RRAS management console I tried to add a rule, by adding "Local Area Connection" to NAT pool (Public Interface - Enable Nat), and an incoming rule for port 22 - :22. I also tried with the same port enabled on Windows Firewall (and not). The NAT management page tells there are "1 mappings" and "30+ Outbound packets transleted". However all other counters (Inbound packets translated, and respective rejected ones) are always zero. (I'm trying to access the server from an external machine). I can directly access the service if I give the VM's public IP, but not the host's one. Is there a way to enable this on RRAS?

  Read the article

• postgresql login from remote

  - by Hellnar

  I want to give remote access to my postresql db (8.2) to computers that are at the same lan, at the default config I have added this line to pg_hba.conf where xxx.xx.xx.xx is the ip of the machine that hosts postgresql. This machine is a windows 2k server. # IPv4 local connections: host all all 0.0.0.0/0 password host all all xxx.xx.xx.xx/24 password There no firewall or such blocking the connection between and `listen_addresses = '*' for postgresql.conf .

  Read the article

• Windows 7 Synchronize folders BUT while some files are open

  - by Nick

  I need some way to synchronize 2 drives I have. I want to do this ofter (once a day or so) There is the main drive that I want to clone/synchronize on a backup hard disk. The problem is in that there is an open TrueCrypt file mounted as a drive, and its live. If you don't know what true crypt is, basically you create a file on a hard disk and that file is encrypted. It's constantly open and modified live. Also Its pretty large. 100GB + I will use freefilesync . There are many tools that can do that. My question is, is it safe to copy the encrypted file while its open ? Does the software freeze the file in one state and copies it ? Or will I get a corrupted file on the other drive ? It was not clear to me how windows handles that. I read something about shadow copy, and the software says that it supports this. Does anyone know something on the matter that can help me ? or some software that will work ok in my scenario ? Thanks

  Read the article

• Connect from Mac OS X to Windows 7 Desktop

  - by jrn

  I am trying to connect from my MacBook to my Windows 7 machine within my own network - if it will work from outside my network that's a plus but no need to have. My Windows 7 machine is freshly installed with Windows 7 Home Premium. It runs the built-in firewall with no settings changed so far as well as Microsoft Security Essentials. So far I tried CoRD and Microsofts Remote Desktop Connections to connect from my Mac to my Windows machine without any success. I did try and disabled the firewall on my Windows machine but could not connect either. The reason I did this was to check wether there is a Windows firewall setting preventing me from connecting. On top of that I manually started the Remote Desktop Services and Remote Desktop Configuration within services.msc. Is there anything else I have to enable for a remote desktop connection? Could there be any router setting I have to tweak? Since I do not want to connect from outside my own network I thought I don't have to do any port forwarding. The error messages I retrieve are all connection timeouts. I can however ping the hostname and/or IP address. Any help would be greatly appreciated. Thanks a lot, jrn

  Read the article

• Windows 7, enabeling IE for removal

  - by Thew

  For a while now, Windows Update has been prompting me to update IE9 to IE10. And every time I turn off my PC, It starts to install that one update wich allways fails. Why does it fail updating IE9? I don't know. So the solution I had in my mind was to remove IE9 and then install IE10 manually. THe problem is now, I can't find the uninstall file for IE9. I have looked in windows control panel / programs and features but it didn't show up, not even in the installed updates section. So after I clicked on Turn windows features on or off, I saw that the IE9 box wasn't checked. So I checked it, clicked OK, but then when I clicked on the Turn windows features on or off link again, it wasn't checked anymore. It's almost like Windows doesn't want me to uninstall IE9. but I have to in order to normally shut down my pc, because everytime I shut my PC off, it tries to install that stupid update again! What can I do to solve this?

  Read the article

• Google SMTP settings not sending email

  - by Baboon

  I am having a hard time making the email sending in GitLab to work (changing email in profile settings). My server has exim4, I can tell its working because if I do simple mail() in PHP, it thus sends the email to the recipient. Now, in GitLab seems that it wasn't. So I modified productions.rb to have SMTP settings, and use Google SMTP: config.action_mailer.delivery_method = :smtp config.action_mailer.smtp_settings = { address: "smtp.gmail.com", port: 465, user_name: "[email protected]", password: "hashpassword", domain: "gmail.com", authentication: :plain, enable_starttls_auto: true } I even tried changing the port to 587 and 467 but still it doesn't work. Why is that? Can you please lead me to where I am missing?

  Read the article

• how to create a script that upon logon in Linux [duplicate]

  - by user272905

  This question already has an answer here: How to display a message before login? 2 answers Under Linux, how to create a script that upon logon, will display the text like Good day, today's date is and the current time is , your current directory is

  Read the article

• Choose source interface for PPTP VPN on Ubuntu

  - by Emyl

  I have an Ubuntu Virtualbox guest with two network interface, eth0 (NAT) and eth1 (bridged). I want to connect to a PPTP VPN using eth1, but I don't know how to specify which interface to use. If i just try: sudo pon myvpn nodetach It fails with: Using interface ppp0 Connect: ppp0 <--> /dev/pts/1 Modem hangup Connection terminated. Looking at routes with route seems to indicate that eth0 is being used: x.x.x.x.no 10.0.2.2 255.255.255.255 UGH 0 0 0 eth0

  Read the article

• How to set umask globally?

  - by DevSolar

  I am using a private user group setup, i.e. a user foo's home directory is owned by foo:foo, not foo:users. For this to work, I need to set the umask to 002 globally. After a quick grep -RIi umask /etc/*, it seemed for a moment that modifying the UMASK entry in /etc/login.defs should do the trick. It does, too -- but only for console logins. If I log in to my desktop, and open a terminal there, I still get to see the default umask 022. Same goes for files created from apps started through the menu. Apparently, the display manager (or whatever X11 component responsible) does source some different setting than a console login does, and damned if I could tell which one it is. (I tried changing the setting in /etc/init.d/rc, and no, it did not help.) How / where do I set umask globally (and for all users), so that the X11 desktop environment gets the memo as well? (The system is Linux Mint / Ubuntu, in case that changes anything...)

  Read the article

• How to upgrade to Windows 8.1 on a machine with a Users folder on a separate drive?

  - by ahsteele

  I tried to upgrade from Windows 8 to Windows 8.1. Unfortunately, during the upgrade process I receive the following error: Sorry, it looks like this PC can't run Windows 8.1. This might be because the Users or Program Files folder is being redirected to another partition. Which is accurate in that I have my Users directory on my D: drive and Windows installed on my C: drive. I do this because my C: drive is an SSD drive and D: drive is a spinning rust drive where I keep my data. Is it possible to upgrade to Windows 8.1 from a Windows 8 install with a redirected Users folder? I do not consider a full reinstall of Windows 8 with a non-mapped Users folder and then upgrading that installation to be "upgrading."

  Read the article

• SSH works in putty but not terminal

  - by Ryan Naddy

  When I try to ssh this in a terminal: ssh [email protected] I get the following error: Connection closed by 69.163.227.82 When I use putty, I am able to connect to the server. Why is this happening, and how can I get this to work in a terminal? ssh -v [email protected] OpenSSH_6.0p1 (CentrifyDC build 5.1.0-472) (CentrifyDC build 5.1.0-472), OpenSSL 0.9.8w 23 Apr 2012 debug1: Reading configuration data /etc/centrifydc/ssh/ssh_config debug1: /etc/centrifydc/ssh/ssh_config line 52: Applying options for * debug1: Connecting to sub.domain.com [69.163.227.82] port 22. debug1: Connection established. debug1: identity file /home/ryannaddy/.ssh/id_rsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_rsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.0 debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP Connection closed by 69.163.227.82

  Read the article

• Windows 7 is stuck at "Starting Windows" when I attempt to boot computer

  - by Eli

  Basically, whenever I turn on my computer, it gets to the Starting Windows phase and just stays there. The startup animation still plays, yet it gets nowhere. I have tried booting into safe mode, however it gets stuck at loading CLASSPNP.SYS. It then freezes there and doesn't continue booting. I have tried booting into recovery mode from the hard drive, and it freezes after displaying the background image. I have tried booting from a recovery CD, which works, and I was able to use system restore. However, using system restore did not fix it, and it still is stuck at the Starting Windows screen. I have tried booting a Windows CD (Windows 8 Retail Installer) to see if I could upgrade it to fix this issue, however that froze at a blank screen after it got past the boot logo. I have tried changing around the BIOS settings (including resetting), to no avail. I have tried re-plugging the internal PSU cables (this is a custom-built desktop), yet this has changed nothing. I can boot into a loopback Ubuntu install on the same drive, which works fine, other than the fact that it has issues with some of the USB ports and the network card. This system has worked fine for the past few months, completely stable, and nothing in the configuration has changed before this error started happening. Startup Repair on the Windows recovery CD doesn't find any issues. Unplugging my secondary hard drive or swapping around memory doesn't change anything. The hard drive itself is fine, it hasn't shown any signs of failure and once again, boots my other OS fine. If anyone could help with this, that would be great. I can't seem to find any possible solution to this. If it makes any difference, my system specs are as follows: AMD FX-8320 Gigabyte GA-970A-D3 4GB of DDR3 Radeon HD 6870 550w PSU I'd like to not have to reinstall Windows, for I have more than a terabyte of data that I would have to back up if that becomes the only option. EDIT: I have since tried the following: Tried the solution involving restoring files from RegBackup, which changed nothing. Tried testing everything with Hiren's boot CD, everything comes back as fine. Tried disabling everything unnecessary in the BIOS and unplugging everything unneeded, it still hangs. Tried swapping out every possible combination of RAM, it still has the same result. The RAM is not at fault it seems Tried every GPU I own (which is many!) and it still hangs at the exact same place. Tried minimizing the power consumption as much as possible, even using an old PCI graphics card. It still hangs at the same place in the same way, signifying that it's not the PSU at fault. Tried resetting the BIOS again, still nothing. Tried every possible combination of BIOS options, even downclocking everything, it still hangs in the same spot. Tried upgrading the BIOS from version FB to FD, which changed nothing. Based on this, I would conclude the motherboard to be at fault. Are there any other possibilities? I don't want to spend $150 for a new motherboard. EDIT 2: This is what it gets stuck at when I try to boot into safe mode: Note the slight graphical corruption at the top of the screen. No matter how I set up the system, this seems to be there. In addition, either it has stopped booting into safe mode now, or it takes upwards of 2+ hours, and I haven't left it running for that long.

  Read the article

• How do programers balance the upper or lower case style to name file or folder between work and life?

  - by sojyq

  I am a programmer from China. And I like to use English words to name my files and folders Whether it is for work or life. For example, suck as Movie, Work, QtProjects, Music and so on.And I keep the habit of initial the first letter for file name or folder name in Windows. But now I work on Ubuntu, and I found that all file name and folder name are lowercase in addition to the default folder such as Music, Movie and so on. And then I realize that in Linux world, most peoloe like to use all lowercase to name their files and folders for two reasons (1. Linux is Case sensitive. 2. It is fast for shell command.). And after work, when I switch from Linux to Windows, I confuse to use all lowercase or the first letter uppercase style to name my files in Windows. I'm caught in a dilemma. I think that all lowercase is more efficiency but the first letter uppercase is more readable. I thought for a long time and want to come up with a good answer to blance the two style name conversion. But I failed. I want to ask you that how you balance the uppercase or lowercase habbit in Windows, Mac, Linux between work and personal life style? Thank you very much! (My current solution is that when I am in Linux, I use all lowercase for files and folders, but when I am in Windows and Mac OS X, I couldn't find a good reason to convince me to use all lowercase ( I think in Windows and Mac OS X, the first letter uppercase style for me is more readable and beautiful).

  Read the article

• How to identify potential for becoming a programmer

  - by Jacob Spire

  There's heaps of information out there on hiring someone who's already a programmer. (Or claims to be one.) But what about identifying someone who has the potential to become a programmer, with little or no knowledge? Aside from the obvious things to look for (smart, gets things done), are there any interview questions and/or tests to determine whether one has the potential to become a programmer? Note: I'm not asking how to tell whether I can learn programming, but how to tell someone else is right for it.

  Read the article

• Complex knowledge management system with CRM..written internally

  - by JonH

  We've all heard of salesforce and sugarcrm and the likes of systems like this. Unfortunately at my workplace we have been asked to write a similiar system (rather then license or purchase). Basically the database is fairly large. Think of modules such as: Corporate groups, customers, programs, projects, sub projects, and issue management. In simple terms a corporate group has one to many customers. A program has one or more projects. A project has one or more sub projects. And an issue can be created on many sub projects. Of course the system is a bit more complex but instead of listing every single module I think its best to keep it simple. In any event, the system in its current state has only two resources to be working on it (basically we have to do it all: CSS, database, jquery, asp.net and C#). We've started off well by defining the UI master and footer pages that way we can reuse those across all of our pages. Now comes the hard part. The system will have about 4k end users with say 5-10% being concurrent users. We are wondering if it makes sense to cache our database data (For say 5-10 minutes) rather then continously hit our database. The reason being is some of these pages may have 5-10 search filters associated with the page. Imagine every time a selection is made from a search box how many database hits. Also some of these search fields cascade so selecting for instance an initial drop down may cascade several drop down boxes under them. Is it wrong to cache because I am not finding too many articles on whether it is a good idea or not. Remember the system is similiar to say a CRM system where we manage our various customers, projects, sub projects, issues, etc.

  Read the article

• Is there a name for a mini class that is not a struct?

  - by user1555300

  I have a couple of mini-classes that are not nested classes. They need to be passed around between different larger classes to use. In a way, they act like Tuples, storing fields in them. For example, [Serializable] public class TransformObject { public GameObject GameObj; public tk2dCameraAnchor Anchor; public ManagerTransform MTransform; } I have a few of them for my game I have been developing. They have to be classes, not struct because the Unity3d editor will not show in the inspector if so. I was just wondering if there is a official name for these kind of mini classes.

  Read the article

• mediatomb fails with "respawning too fast, stopped"

  - by felix

  When I try to start mediatomb it fails. I see this in dmesg [...] [916349.374331] init: mediatomb main process ended, respawning [916349.394462] init: mediatomb main process (880) terminated with status 1 [916349.394512] init: mediatomb main process ended, respawning [916349.414598] init: mediatomb main process (882) terminated with status 1 [916349.414647] init: mediatomb respawning too fast, stopped My current /etc/init/mediatomb.conf looks like this. description "MediaTomb UPnP media server" author "Daniel van Vugt <vanvugt in launchpad>" start on (local-filesystems and net-device-up IFACE!=lo) stop on runlevel [!2345] respawn env CONFIGXML=/etc/mediatomb/config.xml env LOGFILE=/var/log/mediatomb.log env DEFAULT=/etc/default/mediatomb script [ -r $DEFAULT ] && . $DEFAULT [ ! $USER ] && USER=root [ ! $GROUP ] && GROUP=$USER if [ -n "$INTERFACE" ]; then INTERFACE_ARG="-e $INTERFACE" $ROUTE_ADD $INTERFACE fi exec mediatomb \ -c $CONFIGXML \ -u $USER \ -g $GROUP \ -l $LOGFILE \ $INTERFACE_ARG \ $OPTIONS end script post-stop script [ -r $DEFAULT ] && . $DEFAULT if [ -n "$INTERFACE" ]; then $ROUTE_DEL $INTERFACE fi end script

  Read the article

• Ubuntu Touch Official Hardware? [duplicate]

  - by user1628

  This question already has an answer here: Where can I get a device with 'Ubuntu for phones' pre-installed? 1 answer I really like the look of Ubuntu touch and I want it ASAP, however, I am NOT willing to buy a device simply to port ubuntu touch on it. I don't want to void all warranties and take any risks. Therefore, I am really just waiting for official ubuntu touch hardware (devices made for ubuntu touch). I can't find any rumours or estimated release dates online, in fact, I can't find out anything at all. Can anyone? If so, what and where? When do you think they'll be official hardware? What price do you think it'll be? Do you think canonical/ubuntu will manufacture it themselves? Thanks, Zach

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >