Daily Archives

Articles indexed Monday August 25 2014

Page 5/14 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Linux servers vs Windows IIS sense of usage "free" solutions

  - by Rob

  I wonder what is the sense of using "free" open source solutions for serious webstie applications? Crawled and read many testing of servers performance and there is one conclusion: IIS seems to be the best choice for high load applicatiom. I mean cost effective. Especially this concers to Nginx PLUS and LiteSpeed Users where subscriptions paid for e.g. LoadBalacer and extra support cost a lot in fact. I'm asking then where it's "free" then or "cheap" in this case? Assuming even little higher cost of dedicated servers with Windows still seems like Windows looks cheaper. At it's basic setup Windows 2012 with IIS offer much more than std LAMP, or other NGINX config.... Maybe am I missing sth ? I mean only general case for someone who did not already started his app. I know exactly that the cheapest solution is the one someone is skilled. Has anyone done already such real costs calculation for example scenarios?

  Read the article

• Unable to remove invalid(orphaned?) SPNs

  - by Brent

  tldr version: Renamed domain from internal.domain.com to domain.com, have 4 SPNs that am unable to remove from DC. So my domain was internal.domain-name.com and I renamed it to domain-name.com and I thought everything was good. Several days later, I start setting up my RD Gateway and am noticing issues surrounding group policy. I run dcdiag and the SystemLog part fails. Starting test: SystemLog A warning event occurred. EventID: 0x00001796 Time Generated: 08/25/2014 02:48:30 Event String: Microsoft Windows Server has detected that NTLM authentication is presently being used between clients and this server. This event occurs once per boot of the server on the first time a client uses NTLM with this server. An error event occurred. EventID: 0xC0001B70 Time Generated: 08/25/2014 02:49:18 Event String: The SQL Server (MSSQLSERVER) service terminated with the following service-specific error: An error event occurred. EventID: 0xC0001B70 Time Generated: 08/25/2014 02:49:48 Event String: The SQL Server (MSSQLSERVER) service terminated with the following service-specific error: An error event occurred. EventID: 0xC0001B70 Time Generated: 08/25/2014 02:52:47 Event String: The SQL Server (MSSQLSERVER) service terminated with the following service-specific error: This made me check my AD for possible connections to the .internal domain. I found four which I remove by: setspn -D E3514235-4B06-11D1-AB04-00C04FC2DCD2/d79fa59c-74ad-4610-a5e6-b71866c7a157/internal.domain-name.com ServerName setspn -D HOST/ServerName.domain-name.com/internal.domain-name.com ServerName setspn -D GC/ServerName.domain-name.com/internal.domain-name.com ServerName setspn -D ldap/ServerName.domain-name.com/internal.domain-name.com ServerName Also, checking my dns records, there's an internal subdomain that I can delete but it comes back as well. I've tried removing the spns to no avail. Is there something I'm missing?

  Read the article

• 400 error with nginx subdomains over https

  - by aquavitae

  Not sure what I'm doing wrong, but I'm trying to get gunicorn/django through nginx using only https. Here is my nginx configuration: upstream app_server { server unix:/srv/django/app/run/gunicorn.sock fail_timeout=0; } server { listen 80; return 301 https://$host$request_uri; } server { listen 443; server_name app.mydomain.com; ssl on; ssl_certificate /etc/nginx/ssl/nginx.crt; ssl_certificate_key /etc/nginx/ssl/nginx.key; client_max_body_size 4G; access_log /srv/django/app/logs/nginx-access.log; error_log /srv/django/app/logs/nginx-error.log; location /static/ { alias /srv/django/app/data/static/; } location /media/ { alias /wrv/django/app/data/media/; } location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto https; proxy_set_header Host $http_host; proxy_pass http://app_server; } } I get a 400 error on app.mydomain.com, but the app is published on mydomain.com. Is there an error in my configuration?

  Read the article

• Two sites running same code and different config files?

  - by Gen

  I have a Windows 2008R2 server with IIS, running one site (ASP.NET4.5). All the parameters are written in web.config file. I have to add a new site, that will run on the same code (same root folder) as the first one, but will read parameters like sql connection strings etc. from its own config file, not from first site web.config. How can I do that? Is it possible to run the second site in different app pool? Both sites will run the same .NET version of course. Thank you!

  Read the article

• What are good systems for managing PHP/MySQL infrastructure?

  - by sbrattla

  I work in a company which is about to migrate most applications from in-house custom built Java/Tomcat applications to Drupal. Due to company policies, applications and websites need to run on in-house servers. This means that we need infrastructure for Drupal (PHP/MySQL) applications. This must have been solved a million times already. I believe this is what web-hosting companies does every day. Even though we work on a much smaller scale than web-hosting companies, i assume it would make sense to look at the task as if we're going to have an internal small-scale web-hosting company. This means that the guys in IT operations could be "responsible" for "offering" web-hosting, while developers could use these "services". We have three environments; dev(elopment), test and prod(uction). It would make sense that developers could log in to a system and create/edit/delete dev and test sites as they'd like. Production sites should be available through the same system, but only available to IT ops. We need to work with clusters of web servers, meaning that an administration system should be capable of creating/editing/deleting sites across multiple servers. I know there's no "this is it" answer to my question; but what would be a good place to start to get going with this? Apart from the actual hardware, what would be a good administration system for this?

  Read the article

• Can I autoregister my servers hostname in my local DNS? [on hold]

  - by Christian Wattengård

  We have evaluated a W2k12 server as a domain controller at work. This has the extra benefit of registering every "subordinate" computers name in it's DNS so that I don't have to go around remembering IP's all the time. (And it let's me easily run dhcp also on my "pop-up" dev-servers). We need to rework our work network for several odd reasons, and in this new scenario there was no money for an extra Windows 2012 license. We have at our disposal several old boxes that run linux quite well. Is it possible to set up a DNS-server-"appliance" that somehow autoregisters it's own hostname.. Scenario: Router (N66u) on 172.20.20.1. Runs DHCP on 172.20.20.100-200 range. Server [verdant] of a *nix flavor on 172.20.20.2 Laptop [speedy] of W8 flavor on DHCP assigned Laptop [canary] of W8 flavor on DHCP assigned Desktop [lianyu] of Ubuntu flavor on DHCP assigned What I would like is that all of the above servers (except possibly the router) would be available on verdant.starling.lan and canary.starling.lan and so on. This is how it works right now (except the Ubuntu box... I haven't cracked that one yet) because Windows just does this for you.. I would also be able to do this without any manual labor on the server. When I tell my box it's name is smoak it should "immediately" be available as smoak.starling.lan without any extra configuration on my part. How can I do this in a Linux (Ubuntu) environment?

  Read the article

• Limit access on Apache 2.4 to ldap group

  - by jakobbg

  I've upgraded from Ubuntu 12.04 LTS to 14.04 LTS, and suddenly, my Apache 2.4 (previous: Apache 2.2) now lets everybody in to my virtual host, which is unfortunate :-). What am I doing wrong? Anything with the Order/Allow lines? Any help is greatly appreciated! Here's my current config; <VirtualHost *:443> DavLockDB /etc/apache2/var/DavLock ServerAdmin [email protected] ServerName foo.mydomain.com DocumentRoot /srv/www/foo Include ssl-vhosts.conf <Directory /srv/www/foo> Order allow,deny Allow from all Dav On Options FollowSymLinks Indexes AllowOverride None AuthBasicProvider ldap AuthType Basic AuthName "Domain foo" AuthLDAPURL "ldap://localhost:389/dc=mydomain,dc=com?uid" NONE AuthLDAPBindDN "cn=searchUser, dc=mydomain, dc=com" AuthLDAPBindPassword "ThisIsThePwd" require ldap-group cn=users,dc=mydomain,dc=com <FilesMatch '^\.[Dd][Ss]_[Ss]'> Order allow,deny Deny from all </FilesMatch> <FilesMatch '\.[Dd][Bb]'> Order allow,deny Deny from all </FilesMatch> </Directory> ErrorLog /var/log/apache2/error-foo.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access-foo.log combined </VirtualHost>

  Read the article

• Repeat the csv header twice without "Append" (PowerShell 1.0)

  - by Mark

  I have prepared a PowerShell script to export a list of system users in CSV format. The script can output the users list with Export-csv with single header row (the header row at top). However my requirement is to repeat the header row twice in my file. It is easy to achieve in PowerShell 3.0 with "Append" (e.g. $header | out-file $filepath -Append) Our server envirnoment is running PowerShell 1.0. Hence I cannot do it. Is there any workaround? I cannot manually add it myself. Thank you.

  Read the article

• Why "scope link" ipv6 address can be pinged via interfaces which they are not active on

  - by olagu

  [root@2_01 ~]# /sbin/ip -6 addr show pubeth0 inet6 2001:1::6/64 scope global inet6 2001:1::1/64 scope global inet6 fe80::20c:29ff:fe69:f9e8/64 scope link [root@v2_01 ~]# /sbin/ip -6 addr show pubeth1 inet6 fe80::20c:29ff:fe69:f906/64 scope link [root@2_01 ~]# ping6 fe80::20c:29ff:fe69:f9e8%pubeth1 PING fe80::20c:29ff:fe69:f9e8%pubeth1(fe80::20c:29ff:fe69:f9e8) 56 data bytes 64 bytes from fe80::20c:29ff:fe69:f9e8: icmp_seq=1 ttl=64 time=0.259 ms --- fe80::20c:29ff:fe69:f9e8%pubeth1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 286ms rtt min/avg/max/mdev = 0.259/0.259/0.259/0.000 ms [root@2_01 ~]# ping6 fe80::20c:29ff:fe69:f9e8%pubeth0 PING fe80::20c:29ff:fe69:f9e8%pubeth0(fe80::20c:29ff:fe69:f9e8) 56 data bytes 64 bytes from fe80::20c:29ff:fe69:f9e8: icmp_seq=1 ttl=64 time=0.057 ms --- fe80::20c:29ff:fe69:f9e8%pubeth0 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 390ms rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms Why can I ping6 "fe80::20c:29ff:fe69:f9e8" via pubeth1?

  Read the article

• is it possible in this case to get two IPv6 networks to communicate over the IPv4 Internet?

  - by user239167

  I have a setup of a laptop connected to a cellular IPv4 network (3G usb dongle) and PC connected to another IPv4/IPv6 network. Both have been configured to run as IPv6 routers and each has its IPv6 network. The laptop connects to the Internet via the 3G network with IPv4 address (private one and it is mostly changing) on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:444::/64). The PC connects to the Internet via the organization network with both public IPv4 and IPv6 addresses on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:222::/64). Both running Linux Ubuntu. Is it possible to get the two IPv6 network (2001:db8:222::/64 and 2001:db8:444::/64) to communicate over the IPv4 Internet? Is openvpn of any good in this case to get IPv6 traffic over IPv4-IPv4 tunnel? Thanks for helping in advance

  Read the article

• Apache mod_remoteip and access logs

  - by GioMac

  Since Apache 2.4 I've started using mod_remoteip instead of mod_extract_forwarded for rewriting client address from x-forwarded-for provided by frontend servers (varnish, squid, apache etc). So far everything works fine with the modules, i.e. php, cgi, wsgi etc... - client addresses are shown as they should be, but I couldn't write client address in access logs (%a, %h, %{c}a). No luck - I'm always getting 127.0.0.1 (localhost forward ex.). How to log client's ip address when using mod_remoteip?

  Read the article

• sporadic routing to another website when opening a common url

  - by user226098

  I have a strange problem in our office: Sometimes when opening a url from one of our projects random url in any browser not the right website shows up but some other website. In most of the cases it redirects to google.com with some parameters like https://www.google.de/?gfe_rd=cr&ei=krOOU8_kGcSKswadyYDQBw&gws_rd=ssl or just the ugly google 404 page). But today it remains on the origial url but shows up the the content of http://debug.netdna-cdn.com/. This happens about 1 time a week and for no apparent reason. Even stranger it only occurs on a single pc in the network. It now happens on two different computers in the network. Both use windows 8. The problem cannot be fixed by clearing the browser cache but by rebooting the pc or using ipconfig /flushdns. So I think it has something to do with the dns cache of the machine. But I have no idea what the reason is for this and how i can figure out how to solve it. Any ideas?

  Read the article

• CentOS 6 LEMP update - dependency error issue

  - by Latheesan Kanes

  I have setup a LEMP server following the guide Install Nginx/PHP-FPM on Fedora 20/19, CentOS/RHEL 6.5/5.10. It's been a while since I did the setup, so I wanted to grab the latest updates from REMI repository. I ran the following command: yum --enablerepo=remi,remi-php55 update I now get these dependency related errors: # yum --enablerepo=remi update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.nl.leaseweb.net * epel: mirror.1000mbps.com * extras: mirror.nl.leaseweb.net * remi: remi.schlundtech.de * updates: centos.mirror1.spango.com Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package chkconfig.x86_64 0:1.3.49.3-2.el6 will be updated ---> Package chkconfig.x86_64 0:1.3.49.3-2.el6_4.1 will be an update ---> Package glibc.x86_64 0:2.12-1.107.el6_4.4 will be updated ---> Package glibc.x86_64 0:2.12-1.107.el6_4.5 will be an update ---> Package glibc-common.x86_64 0:2.12-1.107.el6_4.4 will be updated ---> Package glibc-common.x86_64 0:2.12-1.107.el6_4.5 will be an update ---> Package gnupg2.x86_64 0:2.0.14-4.el6 will be updated ---> Package gnupg2.x86_64 0:2.0.14-6.el6_4 will be an update ---> Package iputils.x86_64 0:20071127-17.el6_4 will be updated ---> Package iputils.x86_64 0:20071127-17.el6_4.2 will be an update ---> Package kernel.x86_64 0:2.6.32-358.23.2.el6 will be installed ---> Package kernel-firmware.noarch 0:2.6.32-358.18.1.el6 will be updated ---> Package kernel-firmware.noarch 0:2.6.32-358.23.2.el6 will be an update ---> Package libgcrypt.x86_64 0:1.4.5-9.el6_2.2 will be updated ---> Package libgcrypt.x86_64 0:1.4.5-11.el6_4 will be an update ---> Package mysql-libs.x86_64 0:5.1.69-1.el6_4 will be updated --> Processing Dependency: libmysqlclient.so.16()(64bit) for package: 2:postfix-2.6.6-2.2.el6_1.x86_64 --> Processing Dependency: libmysqlclient.so.16(libmysqlclient_16)(64bit) for package: 2:postfix-2.6.6-2.2.el6_1.x86_64 ---> Package mysql-libs.x86_64 0:5.5.34-1.el6.remi will be an update ---> Package nginx.x86_64 0:1.4.2-1.el6.ngx will be updated ---> Package nginx.x86_64 0:1.4.3-1.el6.ngx will be an update ---> Package php-pear.noarch 1:1.9.4-20.el6.remi will be updated ---> Package php-pear.noarch 1:1.9.4-23.el6.remi will be an update ---> Package php-pecl-jsonc.x86_64 0:1.3.2-1.el6.remi.1 will be updated ---> Package php-pecl-jsonc.x86_64 0:1.3.2-2.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 ---> Package php-pecl-mongo.x86_64 0:1.4.3-1.el6.remi.1 will be updated ---> Package php-pecl-mongo.x86_64 0:1.4.4-1.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.3.svn313074.el6.remi.5 will be updated ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.4.svn332053.el6.remi.5.4 will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 ---> Package postgresql-libs.x86_64 0:8.4.13-1.el6_3 will be updated ---> Package postgresql-libs.x86_64 0:8.4.18-1.el6_4 will be an update ---> Package remi-release.noarch 0:6-2.el6.remi will be updated ---> Package remi-release.noarch 0:6.4-1.el6.remi will be an update ---> Package rsync.x86_64 0:3.0.6-9.el6 will be updated ---> Package rsync.x86_64 0:3.0.6-9.el6_4.1 will be an update ---> Package selinux-policy.noarch 0:3.7.19-195.el6_4.12 will be updated ---> Package selinux-policy.noarch 0:3.7.19-195.el6_4.18 will be an update ---> Package selinux-policy-targeted.noarch 0:3.7.19-195.el6_4.12 will be updated ---> Package selinux-policy-targeted.noarch 0:3.7.19-195.el6_4.18 will be an update ---> Package setup.noarch 0:2.8.14-20.el6 will be updated ---> Package setup.noarch 0:2.8.14-20.el6_4.1 will be an update ---> Package tzdata.noarch 0:2013c-2.el6 will be updated ---> Package tzdata.noarch 0:2013g-1.el6 will be an update ---> Package xinetd.x86_64 2:2.3.14-38.el6 will be updated ---> Package xinetd.x86_64 2:2.3.14-39.el6_4 will be an update --> Running transaction check ---> Package compat-mysql51.x86_64 0:5.1.54-1.el6.remi will be installed ---> Package php-pecl-jsonc.x86_64 0:1.3.2-2.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 ---> Package php-pecl-mongo.x86_64 0:1.4.4-1.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.4.svn332053.el6.remi.5.4 will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Finished Dependency Resolution Error: Package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Error: Package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Error: Package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Any idea how to solve these errors? Am I missing a package? or is this a bug?

  Read the article

• Using Windows Azure storage for backup

  - by Bruno

  I am currently looking at Windows Azure blobs as an option for backing up archive data. I want to be able to upload files from an external windows machine via the internet but I don't know enough about Windows Azure storage to make a decision. Some of the questions I have are How do I upload the files. Is there a client application, can I use robocopy? Would it be fast enough? i.e. Could I download or upload 1TB of data in a week? Is it secure? Hopefully someone smarter than me can help me :-)

  Read the article

• Can't login via ssh after upgrading to Ubuntu 12.10

  - by user42899

  I have an Ubuntu 12.04LTS instance on AWS EC2 and I upgraded it to 12.10 following the instructions at https://help.ubuntu.com/community/QuantalUpgrades. After upgrading I can no longer ssh into my VM. It isn't accepting my ssh key and my password is also rejected. The VM is running, reachable, and SSH is started. The problem seems to be about the authentication part. SSH has been the only way for me to access that VM. What are my options? ubuntu@alice:~$ ssh -v -i .ssh/sos.pem [email protected] OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /home/ubuntu/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to www.hostname.com [37.37.37.37] port 22. debug1: Connection established. debug1: identity file .ssh/sos.pem type -1 debug1: identity file .ssh/sos.pem-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: RSA 33:33:33:33:33:33:33:33:33:33:33:33:33:33 debug1: Host '[www.hostname.com]:22' is known and matches the RSA host key. debug1: Found key in /home/ubuntu/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: .ssh/sos.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentications that can continue: publickey,password Permission denied, please try again.

  Read the article

• run sfc /scannow as administrator, but I am administrator

  - by Luigi

  On my windows 2003 I have to run sfc /scannow as admin. I have tried to run it as local administrator and domain administrator, but it says I need of administrator privilege ???? I have tried runas /user:administrator cmd and then on a new shell sfc /scannow. But it does not work too. The error message is: You must be an administrator running a console session in order to use the Windows File Checker utility. the error message is in italian and should be translated in english as above. The following is the cmd's screenshot of the error. I am connected as domain administrator but I run it a runas to be local admin.

  Read the article

• HAproxy to web host sub directory?

  - by daemonza

  Hi for reasons outside my control, I need to load balance two servers, that run a non-virtual host enabled app on IIS. Normally in HAProxy I would load balance servers(apache, tomcat, etc) like this : acl is_www_example_com hdr_end(host) -i www.example.com use_backend www_example_com if is_www_example_com backend www_example_com balance roundrobin cookie SERVERID insert nocache indirect option httpchk HEAD / HTTP/1.0 option httpclose option forwardfor server node1 192.168.1.1:80 cookie node1 server node1 192.168.1.2:80 cookie node1 Which will route to the node 1 and node 2 server and serve up the virtual host site. if I need to route to www.example.com/application/data How would I be able to do it, with the above example, if at all even possible?

  Read the article

• How to stick my changes in httpd.conf on WHM/Cpanel/EasyApache

  - by Seiti

  I'm setting up a server and trying to configure the Apache. It only needs to work as a frontend to Tomcat. To do that I added some instructions to the VirtualHost directive, using mod_proxy: <VirtualHost *> ServerName myserver.domain.com ProxyRequests Off ProxyPass / http://myserver.domain.com:8080/ ProxyPassReverse / http://myserver.domain.com:8080/ </VirtualHost> It works fine, and if the need comes, I´ll use mod_jk. But, how do I do it the right way using easyapache, and stop it to always rewrite my changes.

  Read the article

• Mac OS X: Change $PATH from within python script

  - by Eye of Hell

  I have a bunch of python scripts. One of them installs software (subversion) that requires it's path to be added to $PATH. After it is installed, I want the next script to use the software. If I run export PATH=/opt/subversion/bin:$PATH in bash between the first and second script, all is ok. But if I add os.system( 'export PATH=/opt/subversion/bin:$PATH' ) as the last command of the first script (that installs subversion), $PATH remains unaltered after it exits. Is it any way to change $PATH from within python script so it will remain changed after the script finishes (inside single bash session, of course, I know about /etc/profile).

  Read the article

• unable to schedule a task (access denied)

  - by hiddenkirby

  i have a bat file im trying to schedule every morning. whilst in the Scheduled Task Wizard... when i click on finish... i get a ... The new task could not be created. The specific error is: 0x8007005: Access is denied. Try using the Task page Browse button to locate the application I have attempted using both a domain account that is an administrator on the box... and a local account that is an administrator on the box. On another machine ... i have managed to get this work.. but cannot figure out the difference in configuration. It is using the domain account to run the bat file.

  Read the article

• VIM "upgraded" to expandtab and tabstop=8 on Python files

  - by dotancohen

  After reinstalling my OS from Kubuntu 12.10 to Kubuntu 14.04, VIM has changed its behaviour when editing Python files. Though before the reinstall all file types had noexpandtab and tabstop=4 set, now in Python those values are expandtab and tabstop=8, checked also via VIM behaviour and also via asking VIM set foo?. Non-Python files retain the noexpandtab and tabstop=4 behaviour that I prefer. The .vim direcotry and .vimrc were not touched during the reinstall. It can be seen that no files in .vimrc have been touched in months (with the exception of the irrelevant .netrwhist): - bruno():~$ ls -lat ~/.vim total 68 drwxr-xr-x 85 dotancohen dotancohen 12288 Aug 25 13:00 .. drwxr-xr-x 12 dotancohen dotancohen 4096 Aug 21 11:11 . -rw-r--r-- 1 dotancohen dotancohen 268 Aug 21 11:11 .netrwhist drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 plugin drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 doc drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 syntax drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 ftplugin drwxr-xr-x 4 dotancohen dotancohen 4096 Nov 29 2013 autoload drwxrwxr-x 5 dotancohen dotancohen 4096 May 27 2013 after drwxr-xr-x 2 dotancohen dotancohen 4096 Nov 1 2012 spell -rw------- 1 dotancohen dotancohen 138 Aug 14 2012 .directory -rw-rw-r-- 1 dotancohen dotancohen 190 Jul 3 2012 .VimballRecord drwxrwxr-x 2 dotancohen dotancohen 4096 May 12 2012 colors drwxrwxr-x 2 dotancohen dotancohen 4096 Mar 16 2012 mytags drwxrwxr-x 2 dotancohen dotancohen 4096 Feb 14 2012 keymap Though .vimrc has been touched since the reinstall, it was only me testing to see where the problem is. How can I tell what is settingexpandtab and tabstop? Side note: I'm not even sure what I should read in the built-in help for this issue. I started with ":h plugin" but that did not help other than showing me that the following plugins are loaded (possibly relevant): standard-plugin-list Standard plugins pi_getscript.txt Downloading latest version of Vim scripts pi_gzip.txt Reading and writing compressed files pi_netrw.txt Reading and writing files over a network pi_paren.txt Highlight matching parens pi_tar.txt Tar file explorer pi_vimball.txt Create a self-installing Vim script pi_zip.txt Zip archive explorer LOCAL ADDITIONS: local-additions DynamicSigns.txt - Using Signs for different things NrrwRgn.txt A Narrow Region Plugin (similar to Emacs) fugitive.txt A Git wrapper so awesome, it should be illegal indent-object.txt Text objects based on indent levels. taglist.txt Plugin for browsing source code vimwiki.txt A Personal Wiki for Vim

  Read the article

• FFmpeg overlay two videos, one input with transparency

  - by Gian B.

  I am trying to create a karaoke from a CD+G file (converted to AVI using FFmpeg) and add a video as a background of the lyrics. Here's a screenshot of a the output from CD+G conversion, for simplicity let's call this lyrics.avi http://imgur.com/wUwHUhV Now a have this video.mp4 file that I'd like to put behind this lyrics.avi Here's a sample of what I'm trying to achieve http://imgur.com/8GuWXtQ I'm sure most of you are familiar with karaoke. I haven't used FFmpeg much and I'm not really sure if what I want to achieve is possible with FFmpeg. Is it possible to overlay two videos, and add a transparency to one of the videos? In this case the colour black? How can I set the offset time of the lyrics.avi? Here's the command the I've tried so far: ffmpeg -i video.mp4 -i lyrics.avi -filter_complex "nullsrc=size=854x480 [base]; [0:v] setpts=PTS-STARTPTS, scale=854x480 [upperleft]; [1:v] setpts=PTS-STARTPTS, scale=854x200 [bottomleft]; [base][upperleft] overlay=shortest=1 [tmp1]; [tmp1][bottomleft] overlay=shortest=1:y=280" -c:v libx264 -y karaoke.mp4

  Read the article

• Recover a Parallel Desktop 3 virtual machine in VirtualBox

  - by gregseth

  I have an old HDD image file that was used with Parallels Desktop 3. Ideally I'd like to use it in VirtualBox (conversion). In all the tutorials I found (like this one or that one) the VM must be started: there's the problem. I don't have the machine where Parallel 3 was installed anymore. I tried installing the trial version of the last version of Parallels (9) but it seem it doesn't offer the possibility to import an old VM. So here's the question: Given I can't boot the VM with Parallels Desktop, is there a way to convert the image file to another format that is bootable in VirtualBox? If it changes anything, the host is MacOS X 10.9, the guest is Windows XP.

  Read the article

• Can't read from the source file or disk

  - by Wanna coffee

  I'm having a two WD external hard disk with capacity of 1 TB. I'm trying to copy SAP file(capacity - 250 GB ) in the extension of .vmdk from one hard disk to another hard disk. But when ever i'm trying to copy, at down to the line it showing me this error message. By default my both hard disk File System value is NFTS, even though it showing me an this error message. Is this problem with OS or Hard disk or Data which i'm taken into the action?? What might be the problem, Please give me your suggestions and recommendation. Awaiting for your reply.

  Read the article

• Vimperator; how to hide scrollbars on tabbar?

  - by GrinReaper

  Since the release of the latest version of firefox, I've been having an issue where Vimperator will show scrollbars on its tab-bar. I can't find any relevant options in Vimperator's docs or via googling. The only option that looked remotely relevant was the "scrollbars" setting, but that just determines whether I get scrollbars on Firefox's content window... Is there any particular setting I have to use to hide scrollbars from the tab-bar? (I'm using Waterfox on Win8)

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >